mb/protectli/vault_kbl: Add FW6 support

Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I03e8e8db5d827fe113280f2a6376d364edf42870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>

3 files changed, 138 insertions, 0 deletions

diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index c509c960f0..11f964f34d 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -120,6 +120,7 @@ The boards in this section are not real mainboards, but emulators.
 ## Protectli
 
 - [FW2B / FW4B](protectli/fw2b_fw4b.md)
+- [FW6A / FW6B / FW6C](protectli/fw6.md)
 
 ## Roda
 
diff --git a/Documentation/mainboard/protectli/fw6.jpg b/Documentation/mainboard/protectli/fw6.jpg
new file mode 100644
index 0000000000..0c0b46d5a7
--- /dev/null
+++ b/Documentation/mainboard/protectli/fw6.jpg
diff --git a/Documentation/mainboard/protectli/fw6.md b/Documentation/mainboard/protectli/fw6.md
new file mode 100644
index 0000000000..86449d1cf1
--- /dev/null
+++ b/Documentation/mainboard/protectli/fw6.md
@@ -0,0 +1,137 @@
+# Protectli Vault FW6 series
+
+This page describes how to run coreboot on the [Protectli FW6].
+
+![](fw6.jpg)
+
+## Required proprietary blobs
+
+To build a minimal working coreboot image some blobs are required (assuming
+only the BIOS region is being modified).
+
+```eval_rst
++-----------------+---------------------------------+---------------------+
+| Binary file     | Apply                           | Required / Optional |
++=================+=================================+=====================+
+| FSP-M, FSP-S    | Intel Firmware Support Package  | Required            |
++-----------------+---------------------------------+---------------------+
+| microcode       | CPU microcode                   | Required            |
++-----------------+---------------------------------+---------------------+
+| vgabios         | VGA Option ROM                  | Optional            |
++-----------------+---------------------------------+---------------------+
+```
+
+FSP-M and FSP-S are obtained after splitting the Kaby Lake FSP binary (done
+automatically by the coreboot build system and included into the image) from
+the `3rdparty/fsp` submodule.
+
+Microcode updates are automatically included into the coreboot image by build
+system from the `3rdparty/intel-microcode` submodule.
+
+VGA Option ROM is not required to boot, but if one needs graphics in pre-OS
+stage, it should be included (if not using libgfxinit).
+
+## Flashing coreboot
+
+### Internal programming
+
+The main SPI flash can be accessed using [flashrom]. The first version
+supporting the chipset is flashrom v1.1. Firmware an be easily flashed
+with internal programmer (either BIOS region or full image).
+
+### External programming
+
+The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip.
+This chip is located on the bottom side of the case (the radiator side). One
+has to remove all screws (in order): 4 top cover screws, 4 side cover screws
+(one side is enough), 4 mainboard screws, 4 CPU screws (under DIMMs). Lift up
+the mainboard and turn around it. The flash chip is near the SoC on the DIMM
+slots side. Use a clip (or solder the wires) to program the chip. Specifically,
+it's a Macronix MX25L6406E (3.3V) -[datasheet][MX25L6406E].
+
+## Known issues
+
+- After flashing with external programmer it is always required to reset RTC
+  with jumper or disconnect coin cell temporarily. Only then the platform will
+  boot after flashing.
+- FW6A does not always work reliably with all DIMMs. Linux happens to hang or
+  gives many panics. This issue was present also with vendor BIOS.
+- Sometimes FSPMemoryInit return errors or hangs (especially with 2 DIMMs
+  connected). A workaround is to power cycle the board (even a few times) or
+  temporarily disconnect DIMM when platform is powered off.
+- When using libgfxinit and SeaBIOS bootsplash, the red color is dim
+
+## Untested
+
+Not all mainboard's peripherals and functions were tested because of lack of
+the cables or not being populated on the board case.
+
+- Internal USB 2.0 headers
+- Boot with cleaned ME
+
+## Working
+
+- USB 3.0 front ports (SeaBIOS and Linux)
+- 6 Ethernet ports
+- HDMI port with libgfxinit and VGA Option ROM
+- flashrom
+- PCIe WiFi
+- SATA and mSATA
+- Super I/O serial port 0 (RS232 via front RJ45 connector)
+- SMBus (reading SPD from DIMMs)
+- Initialization with KBL FSP 2.0 (with MemoryInit issues)
+- SeaBIOS payload (version rel-1.12.1)
+- Mini PCIe debug card connected to mSATA (mSATA slot has LPC signals routed)
+- Reset switch
+- Booting Debian, Ubuntu, FreeBSD
+
+## Technology
+
+There are 3 variants of FW6 boards: FW6A, FW6B and FW6C. They differ only in
+used SoC.
+
+- FW6A:
+
+```eval_rst
++------------------+--------------------------------------------------+
+| CPU              | Intel Celeron 3865U                              |
++------------------+--------------------------------------------------+
+| PCH              | Kaby Lake U w/ iHDCP2.2 Base                     |
++------------------+--------------------------------------------------+
+| Super I/O, EC    | ITE IT8772E                                      |
++------------------+--------------------------------------------------+
+| Coprocessor      | Intel Management Engine                          |
++------------------+--------------------------------------------------+
+```
+
+- FW6B:
+
+```eval_rst
++------------------+--------------------------------------------------+
+| CPU              | Intel Core i3-7100U                              |
++------------------+--------------------------------------------------+
+| PCH              | Kaby Lake U w/ iHDCP2.2 Premium                  |
++------------------+--------------------------------------------------+
+| Super I/O, EC    | ITE IT8772E                                      |
++------------------+--------------------------------------------------+
+| Coprocessor      | Intel Management Engine                          |
++------------------+--------------------------------------------------+
+```
+
+- FW6C:
+
+```eval_rst
++------------------+--------------------------------------------------+
+| CPU              | Intel Core i5-7200U                              |
++------------------+--------------------------------------------------+
+| PCH              | Kaby Lake U w/ iHDCP2.2 Premium                  |
++------------------+--------------------------------------------------+
+| Super I/O, EC    | ITE IT8772E                                      |
++------------------+--------------------------------------------------+
+| Coprocessor      | Intel Management Engine                          |
++------------------+--------------------------------------------------+
+```
+
+[Protectli FW6]: https://protectli.com/vault-6-port/
+[MX25L6406E]: https://www.macronix.com/Lists/Datasheet/Attachments/7370/MX25L6406E,%203V,%2064Mb,%20v1.9.pdf
+[flashrom]: https://flashrom.org/Flashrom