mb/asrock: Add ASRock H77 Pro4-M mainboard

This adds a new port for the ASRock H77 Pro4-M motherboard. It is
microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3
SDRAM.

The port was initially done with autoport. It is quite similar to the
ASRock B75 Pro3-M which is already supported by coreboot.

Working:
- Sandy Bridge and Ivy Bridge CPUs (tested: i5-2500, Pentium G2120)
- Native RAM initialization with four DIMMs of two different types
- PS/2 combined port (mouse or keyboard)
- Integrated GPU by libgfxinit on all monitor ports (DVI-D, HDMI, D-Sub)
- PCIe graphics in the PEG slot
- All three additional PCIe slots
- All rear and internal USB2 ports
- All rear and internal USB3 ports with reasonable transfer rates
- All six SATA ports from the PCH (two 6 Gb/s, four 3 Gb/s)
- All two SATA ports from the ASM1061 PCIe-to-SATA bridge (6 Gb/s)
- Rear eSATA connector (multiplexed with one ASM1061 port)
- Console output on the serial port of the Super I/O
- SeaBIOS 1.15.0 to boot slackware64
- SeaBIOS 1.15.0 to boot Windows 10 (needs VGA BIOS)
- Internal flashing with flashrom-1.2 (needs `--ifd -i bios --noverify-all`)
- External flashing with flashrom-1.2 and a Raspberry Pi 1
- S3 suspend/resume from either Linux or Windows 10

Not working:
- Booting from the two SATA ports provided by the ASM1061
- Automatic fan control with the NCT6776D Super I/O

Untested:
- VBT (it is included, though)
- Infrared header

Change-Id: Ic2c51bf7babd9dfcbaf69a5019b2a034762052f2
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

2 files changed, 175 insertions, 0 deletions

diff --git a/Documentation/mainboard/asrock/h77pro4-m.md b/Documentation/mainboard/asrock/h77pro4-m.md
new file mode 100644
index 0000000000..45c603d7a3
--- /dev/null
+++ b/Documentation/mainboard/asrock/h77pro4-m.md
@@ -0,0 +1,174 @@
+# ASRock H77 Pro4-M
+
+The ASRock H77 Pro4-M is a microATX-sized desktop board for Intel Sandy
+Bridge and Ivy Bridge CPUs.
+
+## Technology
+
+```eval_rst
++------------------+--------------------------------------------------+
+| Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
++------------------+--------------------------------------------------+
+| Southbridge      | Intel H77 (bd82x6x)                              |
++------------------+--------------------------------------------------+
+| CPU socket       | LGA 1155                                         |
++------------------+--------------------------------------------------+
+| RAM              | 4 x DDR3-1600                                    |
++------------------+--------------------------------------------------+
+| Super I/O        | Nuvoton NCT6776                                  |
++------------------+--------------------------------------------------+
+| Audio            | Realtek ALC892                                   |
++------------------+--------------------------------------------------+
+| Network          | Realtek RTL8111E                                 |
++------------------+--------------------------------------------------+
+| Serial           | Internal header (RS-232)                         |
++------------------+--------------------------------------------------+
+```
+
+## Status
+
+Tests were done with SeaBIOS 1.14.0 and slackware64-live from 2019-07-12
+(linux-4.19.50).
+
+### Working
+
+- Sandy Bridge and Ivy Bridge CPUs (tested: i5-2500, Pentium G2120)
+- Native RAM initialization with four DIMMs
+- PS/2 combined port (mouse or keyboard)
+- Integrated GPU by libgfxinit on all monitor ports (DVI-D, HDMI, D-Sub)
+- PCIe graphics in the PEG slot
+- All three additional PCIe slots
+- All rear and internal USB2 ports
+- All rear and internal USB3 ports
+- All six SATA ports from the PCH (two 6 Gb/s, four 3 Gb/s)
+- All two SATA ports from the ASM1061 PCIe-to-SATA bridge (6 Gb/s)
+- Rear eSATA connector (multiplexed with one ASM1061 port)
+- Gigabit Ethernet
+- Console output on the serial port
+- SeaBIOS 1.14.0 and 1.15.0 to boot Windows 10 (needs VGA BIOS) and Linux via
+extlinux
+- Internal flashing with flashrom-1.2, see
+[Internal Programming](#internal-programming)
+- External flashing with flashrom-1.2 and a Raspberry Pi 1
+- S3 suspend/resume from either Linux or Windows 10
+- Poweroff
+
+### Not working
+
+- Booting from the two SATA ports provided by the ASM1061
+- Automatic fan control with the NCT6776D Super I/O
+
+### Untested
+
+- EHCI debug
+- S/PDIF audio
+- Other audio jacks than the green one, and the front panel header
+- Parallel port
+- Infrared/CIR
+- Wakeup from anything but the power button
+
+## Flashing coreboot
+
+```eval_rst
++---------------------+------------+
+| Type                | Value      |
++=====================+============+
+| Socketed flash      | yes        |
++---------------------+------------+
+| Model               | W25Q64.V   |
++---------------------+------------+
+| Size                | 8 MiB      |
++---------------------+------------+
+| Package             | DIP-8      |
++---------------------+------------+
+| Write protection    | no         |
++---------------------+------------+
+| Dual BIOS feature   | no         |
++---------------------+------------+
+| Internal flashing   | yes        |
++---------------------+------------+
+```
+
+The flash is divided into the following regions, as obtained with
+`ifdtool -f rom.layout backup.rom`:
+```
+00000000:00000fff fd
+00200000:007fffff bios
+00001000:001fffff me
+```
+
+### Internal programming
+
+The main SPI flash can be accessed using flashrom. By default, only
+the BIOS region of the flash is writable. If you wish to change any
+other region (Management Engine or flash descriptor), then an external
+programmer is required.
+
+The following command may be used to flash coreboot:
+
+```
+$ sudo flashrom --noverify-all --ifd -i bios -p internal -w coreboot.rom
+```
+
+The use of `--noverify-all` is required since the Management Engine
+region is not readable even by the host.
+
+```eval_rst
+In addition to the information here, please see the
+:doc:`../../flash_tutorial/index`.
+```
+
+## Hardware monitoring and fan control
+
+There are two fan headers for the CPU cooler, CPU_FAN1 and CPU_FAN2. They share
+a single fan tachometer input on the Super I/O while some dedicated logic
+selects which one is allowed to reach it. Two GPIO pins on the Super I/O are
+used to control that logic. The firmware has to set them; coreboot selects
+CPU_FAN1 by default, but the user can change that setting if it was built with
+CONFIG_USE_OPTION_TABLE:
+
+```
+$ sudo nvramtool -e cpu_fan_header
+[..]
+$ sudo nvramtool -w cpu_fan_header=CPU_FAN2
+$ sudo nvramtool -w cpu_fan_header=None
+$ sudo nvramtool -w cpu_fan_header=Both
+```
+
+The setting will take effect after a reboot. Selecting and connecting both fan
+headers is possible but the Super I/O will report wrong fan speeds.
+
+Currently there is no automatic, OS-independent fan control, but a software
+like `fancontrol` from the lm-sensors package can be used instead.
+
+## Serial port header
+
+Serial port 1, provided by the Super I/O, is exposed on a pin header. The
+RS-232 signals are assigned to the header so that its pin numbers map directly
+to the pin numbers of a DE-9 connector. If your serial port doesn't seem to
+work, check if your bracket expects a different assignment. Also don't try to
+connect it directly to a device that operates at TTL levels - it would need a
+level converter like a MAX232.
+
+Here is a top view of the serial port header found on this board:
+
+                 +---+---+
+             N/C |   | 9 | RI  -> pin 9
+                 +---+---+
+    Pin 8 <- CTS | 8 | 7 | RTS -> pin 7
+                 +---+---+
+    Pin 6 <- DSR | 6 | 5 | GND -> pin 5
+                 +---+---+
+    Pin 4 <- DTR | 4 | 3 | TxD -> pin 3
+                 +---+---+
+    Pin 2 <- RxD | 2 | 1 | DCD -> pin 1
+                 +---+---+
+
+## eSATA
+
+The eSATA port on the rear I/O panel and the internal connector SATA3_A1 share
+the same controller port on the ASM1061. Attaching an eSATA drive causes a
+multiplexer chip to disconnect the internal port from the SATA controller and
+connect the eSATA port instead. This can be seen on GP23 of the Super I/O
+GPIOs: it is '0' when something is connected to the eSATA port and '1'
+otherwise.
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index 0d5ec5f542..fc602de1a9 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -11,6 +11,7 @@ This section contains documentation about coreboot on specific mainboards.
 
 ## ASRock
 
+- [H77 Pro4-M](asrock/h77pro4-m.md)
 - [H81M-HDS](asrock/h81m-hds.md)
 - [H110M-DVS](asrock/h110m-dvs.md)