diff options
author | Tristan Corrick <tristan@corrick.kiwi> | 2018-10-31 03:02:11 +1300 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2018-11-16 10:05:26 +0000 |
commit | 3693294112a717aeb3f14db80f9e753dd376ca58 (patch) | |
tree | 64c25da486e7154a5ecb0d4b6749f7a45932532c /Documentation/mainboard/asrock/h81m-hds.md | |
parent | b2632cec0e6be1f90e209bbfd54a36287b862a08 (diff) |
mainboard: Add ASRock H81M-HDS
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with
kernel 4.9.
This board works quite well under coreboot. A list of what works and
what doesn't can be found in the documentation part of this commit.
The file `data.vbt` matches the VBT in the latest stable version of the
vendor firmware (version 2.20).
Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Diffstat (limited to 'Documentation/mainboard/asrock/h81m-hds.md')
-rw-r--r-- | Documentation/mainboard/asrock/h81m-hds.md | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/Documentation/mainboard/asrock/h81m-hds.md b/Documentation/mainboard/asrock/h81m-hds.md new file mode 100644 index 0000000000..0338aa10bb --- /dev/null +++ b/Documentation/mainboard/asrock/h81m-hds.md @@ -0,0 +1,146 @@ +# ASRock H81M-HDS + +This page describes how to run coreboot on the [ASRock H81M-HDS]. + +## Required proprietary blobs + +This board currently requires a proprietary blob in order to initialise +the RAM and a few other components. The blob largely consists of Intel's +Memory Reference Code (shortened to mrc), and is just under 200 KiB +in size. It is also known as a system agent binary. Unfortunately, +it is not currently possible to distribute this as part of coreboot. +However, the mrc can be obtained from a Haswell Chromebook firmware +image, and you might find one online. The mrc from a ChromeOS image can +be extracted with the following command. If extracting from a "standard" +coreboot image, omit `-r RO_SECTION`. + +```bash +cbfstool coreboot.rom extract -f mrc.bin -n mrc.bin -r RO_SECTION +``` + +Now, place mrc.bin in the root of the coreboot directory. +Alternatively, place it anywhere you want, and set `MRC_FILE` to its +location when building coreboot. + +## Building coreboot + +A fully working image should be possible just by setting your MAC +address and obtaining the Haswell mrc. You can set the basic config +with the following commands. However, it is strongly advised to use +`make menuconfig` afterwards (or instead), so that you can see all of +the settings. + +```bash +make distclean # Note: this will remove your current config, if it exists. +touch .config +./util/scripts/config --enable VENDOR_ASROCK +./util/scripts/config --enable BOARD_ASROCK_H81M_HDS +./util/scripts/config --enable HAVE_MRC +./util/scripts/config --set-str REALTEK_8168_MACADDRESS "xx:xx:xx:xx:xx:xx" # Fill this in! +make olddefconfig +``` + +If you don't plan on using coreboot's serial console to collect logs, +you might want to disable it at this point (`./util/scripts/config +--disable CONSOLE_SERIAL`). It should reduce the boot time by several +seconds. However, a more flexible method is to change the console log +level from within an OS using `util/nvramtool`, or with the `nvramcui` +payload. + +Now, run `make` to build the coreboot image. + +## Flashing coreboot + +### Internal programming + +The main SPI flash can be accessed using [flashrom]. By default, only +the BIOS region of the flash is writable. If you wish to change any +other region, such as the Management Engine or firmware descriptor, then +an external programmer is required (unless you find a clever way around +the flash protection). + +The following command may be used to flash coreboot: + +```bash +sudo flashrom -p internal --ifd -i bios --noverify-all -w coreboot.rom +``` + +The use of `--noverify-all` is required since the Management Engine +region is not readable even by the host. + +### External programming + +The flash chip is a 4 MiB socketed DIP-8 chip. Specifically, it's a +Winbond W25Q32FV, whose datasheet can be found [here][W25Q32FV]. +The chip is located to the bottom right-hand side of the board. For +a precise location, refer to section 1.4 (Motherboard Layout) of the +[board manual], where the chip is labelled "32Mb BIOS". Take note of +the chip's orientation, remove it from its socket, and flash it with +an external programmer. For reference, the notch in the chip should be +facing towards the bottom of the board. + +## Known issues + +- PCIe graphics is non-functional. The PCIe 16x slot doesn't work + with other devices, either. + +- The VGA port doesn't work until the OS reinitialises the display. + +- There is no automatic, OS-independent fan control. This is because + the super I/O hardware monitor can only obtain valid CPU temperature + readings from the PECI agent, but the required driver doesn't exist + in coreboot. The `coretemp` driver can still be used for accurate CPU + temperature readings from an OS. + +## Untested + +- parallel port +- PS/2 keyboard +- EHCI debug +- TPM +- infrared module +- chassis intrusion header +- chassis speaker header + +## Working + +- USB +- S3 suspend/resume +- Gigabit Ethernet +- integrated graphics +- PCIe (but not the 16x slot, see [Known issues](#known-issues)) +- SATA +- PS/2 mouse +- serial port +- hardware monitor (see [Known issues](#known-issues)) +- onboard audio +- front panel audio +- initialisation with Haswell mrc version 1.6.1 build 2 +- graphics init with libgfxinit (see [Known issues](#known-issues)) +- flashrom under the vendor firmware +- flashrom under coreboot +- Wake-on-LAN +- Using `me_cleaner` + +## Technology + +```eval_rst ++------------------+--------------------------------------------------+ +| Northbridge | Intel Haswell | ++------------------+--------------------------------------------------+ +| Southbridge | Intel Lynx Point (H81) | ++------------------+--------------------------------------------------+ +| CPU | Intel Haswell (LGA1150) | ++------------------+--------------------------------------------------+ +| Super I/O | Nuvoton NCT6776 | ++------------------+--------------------------------------------------+ +| EC | None | ++------------------+--------------------------------------------------+ +| Coprocessor | Intel Management Engine | ++------------------+--------------------------------------------------+ +``` + +[ASRock H81M-HDS]: https://www.asrock.com/mb/Intel/H81M-HDS/ +[W25Q32FV]: https://www.winbond.com/resource-files/w25q32fv%20revi%2010202015.pdf +[flashrom]: https://flashrom.org/Flashrom +[Board manual]: http://asrock.pc.cdn.bitgravity.com/Manual/H81M-HDS.pdf |