add target configuration files for Tyan s4882, update tyan s2880 and s2885

config.


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1475 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 257 insertions, 7 deletions

diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb
index 2ca6d643fe..3525475368 100644
--- a/targets/tyan/s2880/Config.lb
+++ b/targets/tyan/s2880/Config.lb
@@ -181,12 +181,12 @@ option DEBUG=1
 option _RAMBASE=0x004000
 
 ##
-## Use a 128K stack 
+## Use a 128K stack
 ##
-option STACK_SIZE=0x4000
+option STACK_SIZE=0x4000 
 
 ##
-## Use a 256K heap + 64
+## Use a 256K heap + 128 
 ##
 option HEAP_SIZE=0xa000
 
diff --git a/targets/tyan/s2885/Config.lb b/targets/tyan/s2885/Config.lb
index 8cb8f70bee..6f313264a2 100644
--- a/targets/tyan/s2885/Config.lb
+++ b/targets/tyan/s2885/Config.lb
@@ -179,14 +179,14 @@ option DEBUG=1
 option _RAMBASE=0x004000
 
 ##
-## Use a 128K stack
+## Use a 128K stack + 128
 ##
-option STACK_SIZE=0x4000
+option STACK_SIZE=0x8000
 
 ##
-## Use a 256K heap + 64
+## Use a 256K heap + 128 + 64
 ##
-option HEAP_SIZE=0xa000
+option HEAP_SIZE=0xe000
 
 #
 ###
diff --git a/targets/tyan/s4882/Config.lb b/targets/tyan/s4882/Config.lb
new file mode 100644
index 0000000000..34f3080c95
--- /dev/null
+++ b/targets/tyan/s4882/Config.lb
@@ -0,0 +1,241 @@
+# Sample config file for 
+# the Tyan s2880 
+# This will make a target directory of ./s2880
+
+loadoptions
+
+target s4882
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_SMP
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses k7
+uses k8
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+#uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses CONFIG_CHIP_CONFIGURE
+ 
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses DEBUG
+uses CONFIG_MAX_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses LINUXBIOS_EXTRA_VERSION
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
+uses HAVE_HARD_RESET
+
+#uses CONFIG_VGABIOS
+#uses CONFIG_REALMODE_IDT
+#uses CONFIG_PCIBIOS
+#uses VGABIOS_START
+#uses SCSIFW_START
+
+#
+#uses CONFIG_LSI_SCSI_FW_FIXUP
+
+option HAVE_HARD_RESET=1
+
+option HAVE_OPTION_TABLE=1
+option HAVE_MP_TABLE=1
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option k7=1
+option k8=1
+option ROM_SIZE=524288
+
+#option CONFIG_VGABIOS=0
+#option CONFIG_REALMODE_IDT=0
+#option CONFIG_PCIBIOS=0
+#option VGABIOS_START=0xfff8c000
+#option SCSIFW_START=0xfff80000
+
+
+option HAVE_FALLBACK_BOOT=1
+  
+# use the new chip configure code.
+
+option CONFIG_CHIP_CONFIGURE=1
+#option CONFIG_LSI_SCSI_FW_FIXUP=1
+
+
+#
+###
+### Build code to export a programmable irq routing table
+###
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=22
+#
+###
+### Build code for SMP support
+### Only worry about 2 micro processors
+###
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=4
+option CONFIG_LOGICAL_CPUS=0
+option CONFIG_MAX_PHYSICAL_CPUS=4
+#
+###
+### Build code to setup a generic IOAPIC
+###
+option CONFIG_IOAPIC=1
+#
+###
+### MEMORY_HOLE instructs earlymtrr.inc to
+### enable caching from 0-640KB and to disable 
+### caching from 640KB-1MB using fixed MTRRs 
+###
+### Enabling this option breaks SMP because secondary
+### CPU identification depends on only variable MTRRs
+### being enabled.
+###
+#option MEMORY_HOLE=0
+#
+###
+### Clean up the motherboard id strings
+###
+option MAINBOARD_PART_NUMBER="S4882"
+option MAINBOARD_VENDOR="Tyan"
+#
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+#option FALLBACK_SIZE=524288
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE=65536
+ 
+
+###
+### Compute where this copy of linuxBIOS will start in the boot rom
+###
+#
+###
+
+## We do use compressed image
+option CONFIG_COMPRESS=1
+
+option CONFIG_CONSOLE_SERIAL8250=1
+option TTYS0_BAUD=115200
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable
+## ALERT      2   action must be taken immediately
+## CRIT       3   critical conditions
+## ERR        4   error conditions
+## WARNING    5   warning conditions
+## NOTICE     6   normal but significant condition
+## INFO       7   informational
+## DEBUG      8   debug-level messages
+## SPEW       9   Way too many details
+
+## Request this level of debugging output
+option DEFAULT_CONSOLE_LOGLEVEL=7
+## At a maximum only compile in this level of debugging
+option MAXIMUM_CONSOLE_LOGLEVEL=7
+
+option DEBUG=1
+
+#
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x004000
+
+##
+## Use a 256K stack
+##
+option STACK_SIZE=0x4000
+
+##
+## Use a 384K heap
+##
+option HEAP_SIZE=0xa000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+option CONFIG_ROM_STREAM     = 1
+
+#
+# 
+romimage "normal"
+#	48K for SCSI FW
+        option ROM_SIZE = 475136
+#	48K for SCSI FW and 48K for ATI ROM
+#	option ROM_SIZE = 425984  
+        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
+	option ROM_SECTION_OFFSET= 0
+
+	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+
+	option XIP_ROM_SIZE = FALLBACK_SIZE
+	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+
+	mainboard tyan/s4882
+	payload ../../tg3--ide_disk.zelf 
+end
+
+romimage "fallback" 
+	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+	option USE_FALLBACK_IMAGE=1
+	option ROM_SECTION_SIZE  = FALLBACK_SIZE
+	option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
+
+	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+
+	option XIP_ROM_SIZE = FALLBACK_SIZE
+	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+
+	mainboard tyan/s4882
+	payload ../../tg3--ide_disk.zelf
+#	payload ../../filo.elf.d
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s4882/VERSION b/targets/tyan/s4882/VERSION
new file mode 100644
index 0000000000..cd5ac039d6
--- /dev/null
+++ b/targets/tyan/s4882/VERSION
@@ -0,0 +1 @@
+2.0
diff --git a/targets/tyan/s4882/ns4882 b/targets/tyan/s4882/ns4882
new file mode 100644
index 0000000000..97e3850385
--- /dev/null
+++ b/targets/tyan/s4882/ns4882
@@ -0,0 +1,8 @@
+#!/bin/bash
+TYANMB=s4882
+cd "$TYANMB"
+make
+#cat ../fwx.rom ../atix.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
+cat ../fwx.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
+#cat ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
+cp -f $TYANMB"_linuxbios.rom" /home/yhlu/