diff options
author | Xavi Drudis Ferran <xdrudis@tinet.cat> | 2011-02-28 03:02:40 +0000 |
---|---|---|
committer | Marc Jones <marc.jones@amd.com> | 2011-02-28 03:02:40 +0000 |
commit | 19245c94c8d8e293fdb7e4c734ef0abccf601ca2 (patch) | |
tree | dcd454b470b68ddfd30169a3faf61f5c4bc03d70 | |
parent | 9cbcf1ada4ac32b3fb638b0a002f9cb7ae003072 (diff) |
Improving BKDG implementation of P-states,
CPU and northbridge frequency and voltage
handling for Fam 10 in SVI mode.
Factor out some common expressions.
Add an error message when coreboots hangs waiting for a pstate
that never comes (it happened to me), and throw some
paranoia at it for good mesure.
If I understood BKDG fam10 CPUs never need a software initiated vid transition,
because the hardware knows what to do when you just request
a Pstate change if the cpu is properly configured. In fact
unifying a little what PVI and SVI do was better for my board (SVI).
So I drop transitionVid, which I didn't understand either (why
did it have a case for PVI if it is never called for PVI ?
Why did the PVI case distinguigh cpu or nb when PVI is
theoretically single voltage plane ? ).
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r-- | src/cpu/amd/model_10xxx/fidvid.c | 362 | ||||
-rw-r--r-- | src/northbridge/amd/amdht/AsPsDefs.h | 15 | ||||
-rw-r--r-- | src/northbridge/amd/amdmct/wrappers/mcti_d.c | 13 |
3 files changed, 173 insertions, 217 deletions
diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index 13416f7bc2..9c008b2bc9 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -67,13 +67,13 @@ static void enable_fid_change(u8 fid) } static void setVSRamp(device_t dev) { - /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime] - * If this field accepts 8 values between 10 and 500 us why - * does page 324 say "BIOS should set this field to 001b." + /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime] + * If this field accepts 8 values between 10 and 500 us why + * does page 324 say "BIOS should set this field to 001b." * (20 us) ? * Shouldn't it depend on the voltage regulators, mainboard - * or something ? - */ + * or something ? + */ u32 dword; dword = pci_read_config32(dev, 0xd8); dword &= VSRAMP_MASK; @@ -180,18 +180,18 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) } static u32 nb_clk_did(int node, u32 cpuRev,u8 procPkg) { - u8 link0isGen3 = 0; + u8 link0isGen3 = 0; u8 offset; if (AMD_CpuFindCapability(node, 0, &offset)) { link0isGen3 = (AMD_checkLinkType(node, 0, offset) & HTPHY_LINKTYPE_HT3 ); } - /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package - S1g3 in link Gen3 mode, but I don't know how to tell - package S1g3 from S1g4 */ - if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX) + /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package + S1g3 in link Gen3 mode, but I don't know how to tell + package S1g3 from S1g4 */ + if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX) && link0isGen3) { - return 5 ; /* divide clk by 128*/ - } else { + return 5 ; /* divide clk by 128*/ + } else { return 4 ; /* divide clk by 16 */ } } @@ -200,29 +200,29 @@ static u32 nb_clk_did(int node, u32 cpuRev,u8 procPkg) { static u32 power_up_down(int node, u8 procPkg) { u32 dword=0; /* from CPU rev guide #41322 rev 3.74 June 2010 Table 26 */ - u8 singleLinkFlag = ((procPkg == AMD_PKGTYPE_AM3_2r2) - || (procPkg == AMD_PKGTYPE_S1gX) + u8 singleLinkFlag = ((procPkg == AMD_PKGTYPE_AM3_2r2) + || (procPkg == AMD_PKGTYPE_S1gX) || (procPkg == AMD_PKGTYPE_ASB2)); if (singleLinkFlag) { - /* + /* * PowerStepUp=01000b - 50nS * PowerStepDown=01000b - 50ns */ dword |= PW_STP_UP50 | PW_STP_DN50; } else { - u32 dispRefModeEn = (pci_read_config32(NODE_PCI(node,0),0x68) >> 24) & 1; + u32 dispRefModeEn = (pci_read_config32(NODE_PCI(node,0),0x68) >> 24) & 1; u32 isocEn = 0; - int j; + int j; for(j=0 ; (j<4) && (!isocEn) ; j++ ) { u8 offset; if (AMD_CpuFindCapability(node, j, &offset)) { isocEn = (pci_read_config32(NODE_PCI(node,0),offset+4) >>12) & 1; } - } + } if (dispRefModeEn || isocEn) { - dword |= PW_STP_UP50 | PW_STP_DN50 ; + dword |= PW_STP_UP50 | PW_STP_DN50 ; } else { /* get number of cores for PowerStepUp & PowerStepDown in server 1 core - 400nS - 0000b @@ -247,17 +247,17 @@ static u32 power_up_down(int node, u8 procPkg) { } } } - return dword; + return dword; } -static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) { +static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) { device_t dev = NODE_PCI(node, 3); /* Program fields in Clock Power/Control register0 (F3xD4) */ /* set F3xD4 Clock Power/Timing Control 0 Register * NbClkDidApplyAll=1b - * NbClkDid=100b or 101b + * NbClkDid=100b or 101b * PowerStepUp= "platform dependent" * PowerStepDown= "platform dependent" * LinkPllLink=01b @@ -275,7 +275,7 @@ static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) { } -static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) { +static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) { /* check PVI/SVI */ u32 dword = pci_read_config32(dev, 0xA0); @@ -302,10 +302,10 @@ static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) { dword = dtemp; } /* set the rest of A0 since we're at it... */ - - if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) { + + if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) { dword |= NB_PSTATE_FORCE_ON; - } // else should we clear it ? + } // else should we clear it ? if ((procPkg == AMD_PKGTYPE_G34) || (procPkg == AMD_PKGTYPE_C32) ) { @@ -320,41 +320,41 @@ static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) { #endif pci_write_config32(dev, 0xA0, dword); } - + static void config_nb_syn_ptr_adj(device_t dev, u32 cpuRev) { /* Note the following settings are additional from the ported * function setFidVidRegs() */ - /* adjust FIFO between nb and core clocks to max allowed - values (min latency) */ + /* adjust FIFO between nb and core clocks to max allowed + values (min latency) */ u32 nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK; u8 nbSynPtrAdj; if ((cpuRev & (AMD_DR_Bx|AMD_DA_Cx) ) - || ( (cpuRev & AMD_RB_C3) && (nbPstate!=0))) { - nbSynPtrAdj = 5; + || ( (cpuRev & AMD_RB_C3) && (nbPstate!=0))) { + nbSynPtrAdj = 5; } else { nbSynPtrAdj = 6; } u32 dword = pci_read_config32(dev, 0xDc); dword &= ~ NB_SYN_PTR_ADJ_MASK; - dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS; + dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS; /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */ pci_write_config32(dev, 0xdc, dword); } static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg) { - /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ + /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ u32 dword; u32 c1= 1; if (cpuRev & (AMD_DR_Bx)) { // will coreboot ever enable cache scrubbing ? // if it does, will it be enough to check the current state - // or should we configure for what we'll set up later ? + // or should we configure for what we'll set up later ? dword = pci_read_config32(dev, 0x58); u32 scrubbingCache = dword & ( (0x1F << 16) // DCacheScrub - | (0x1F << 8) ); // L2Scrub + | (0x1F << 8) ); // L2Scrub if (scrubbingCache) { c1 = 0x80; } else { @@ -368,7 +368,7 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg c1 = 0x80; } } - dword = (c1 << 24) | (0xE641E6); + dword = (c1 << 24) | (0xE641E6); pci_write_config32(dev, 0x84, dword); @@ -377,25 +377,25 @@ frequency and the chipset does not support a 10us minimum LDTSTOP assertion time, then { If ASB2 && SVI then smaf001 = F6h else smaf001=87h. } else ... I hardly know what it means or how to check it from here, so I bluntly assume it is false and code here the else, -which is easier */ +which is easier */ u32 smaf001 = 0xE6; if (cpuRev & AMD_DR_Bx ) { smaf001 = 0xA6; } else { #if CONFIG_SVI_HIGH_FREQ - if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) { - smaf001 = 0xF6; + if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) { + smaf001 = 0xF6; } #endif } u32 fidvidChange = 0; if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX)) - || (cpuRev & AMD_RB_C3) ) { + || (cpuRev & AMD_RB_C3) ) { fidvidChange=0x0B; - } - dword = (0xE6 << 24) | (fidvidChange << 16) - | (smaf001 << 8) | 0x81; + } + dword = (0xE6 << 24) | (fidvidChange << 16) + | (smaf001 << 8) | 0x81; pci_write_config32(dev, 0x80, dword); } @@ -423,7 +423,7 @@ static void prep_fid_change(void) config_clk_power_ctrl_reg0(i,cpuRev,procPkg); - config_power_ctrl_misc_reg(dev,cpuRev,procPkg); + config_power_ctrl_misc_reg(dev,cpuRev,procPkg); config_nb_syn_ptr_adj(dev,cpuRev); config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg); @@ -443,6 +443,62 @@ static void prep_fid_change(void) } } +static void waitCurrentPstate(u32 target_pstate){ + msr_t initial_msr = rdmsr(TSC_MSR); + msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR); + msr_t tsc_msr; + u8 timedout ; + + /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a + * P1 that is a copy of P0, therefore has the same NB DID but the + * TSC will count twice per tick, so we have to wait for twice the + * count to achieve the desired timeout. But I'm likely to + * misunderstand this... + */ + u32 corrected_timeout = ( (pstate_msr.lo==1) + && (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ? + WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT ; + msr_t timeout; + + timeout.lo = initial_msr.lo + corrected_timeout ; + timeout.hi = initial_msr.hi; + if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) { + timeout.hi++; + } + + // assuming TSC ticks at 1.25 ns per tick (800 MHz) + do { + pstate_msr = rdmsr(CUR_PSTATE_MSR); + tsc_msr = rdmsr(TSC_MSR); + timedout = (tsc_msr.hi > timeout.hi) + || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo )); + } while ( (pstate_msr.lo != target_pstate) && (! timedout) ) ; + + if (pstate_msr.lo != target_pstate) { + msr_t limit_msr = rdmsr(0xc0010061); + printk(BIOS_ERR, "*** Time out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%02x\n", target_pstate, pstate_msr.lo, limit_msr.lo); + + do { // should we just go on instead ? + pstate_msr = rdmsr(CUR_PSTATE_MSR); + } while ( pstate_msr.lo != target_pstate ) ; + } +} + +static void set_pstate(u32 nonBoostedPState) { + msr_t msr; + + // Transition P0 for calling core. + msr = rdmsr(0xC0010062); + + msr.lo = nonBoostedPState; + wrmsr(0xC0010062, msr); + + /* Wait for P0 to set. */ + waitCurrentPstate(nonBoostedPState); +} + + + static void UpdateSinglePlaneNbVid(void) { @@ -468,157 +524,62 @@ static void UpdateSinglePlaneNbVid(void) } } -static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid) -{ - msr_t msr; - u8 startup_pstate; - - /* This function sets NbVid before the warm reset. - * Get StartupPstate from MSRC001_0071. - * Read Pstate register pionted by [StartupPstate]. - * and copy its content to P0 and P1 registers. - * Copy newNbVid to P0[NbVid]. - * transition to P1 on all cores, - * then transition to P0 on core 0. - * Wait for MSRC001_0063[CurPstate] = 000b on core 0. - */ - - msr = rdmsr(0xc0010071); +static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode) + { + msr_t msr; + u8 startup_pstate; + + /* This function sets NbVid before the warm reset. + * Get StartupPstate from MSRC001_0071. + * Read Pstate register pointed by [StartupPstate]. + * and copy its content to P0 and P1 registers. + * Copy newNbVid to P0[NbVid]. + * transition to P1 on all cores, + * then transition to P0 on core 0. + * Wait for MSRC001_0063[CurPstate] = 000b on core 0. + * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration + * for SVI and Single-Plane PVI Systems + */ + + msr = rdmsr(0xc0010071); startup_pstate = (msr.hi >> (32 - 32)) & 0x07; - /* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for this node in P0. - * Then transition to P1 for corex and P0 for core0. - * These setting will be cleared by the warm reset + /* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for + * this node in P0. Then transition to P1 for corex and P0 + * for core0. These setting will be cleared by the warm reset */ msr = rdmsr(0xC0010064 + startup_pstate); wrmsr(0xC0010065, msr); wrmsr(0xC0010064, msr); + /* missing step 2 from BDKG , F3xDC[PstateMaxVal] = + * max(1,F3xDC[PstateMaxVal] ) because it would take + * synchronization between cores and we don't think + * PstatMaxVal is going to be 0 on cold reset anyway ? + */ + if ( ! (pci_read_config32(dev, 0xDC) & (~ PS_MAX_VAL_MASK)) ) { + printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1 \n"); + }; + msr.lo &= ~0xFE000000; // clear nbvid - msr.lo |= newNbVid << 25; + msr.lo |= (newNbVid << 25); wrmsr(0xC0010064, msr); - UpdateSinglePlaneNbVid(); + if (pviMode) { /* single plane*/ + UpdateSinglePlaneNbVid(); + } // Transition to P1 for all APs and P0 for core0. - msr = rdmsr(0xC0010062); - msr.lo = (msr.lo & ~0x07) | 1; - wrmsr(0xC0010062, msr); - - // Wait for P1 to set. - do { - msr = rdmsr(0xC0010063); - } while (msr.lo != 1); + set_pstate(1); if (coreid == 0) { - msr.lo = msr.lo & ~0x07; - wrmsr(0xC0010062, msr); - // Wait for P0 to set. - do { - msr = rdmsr(0xC0010063); - } while (msr.lo != 0); - } -} - -static void coreDelay(void) -{ - u32 saved; - u32 hi, lo, msr; - u32 cycles; - - /* delay ~40us - This seems like a hack to me... - It would be nice to have a central delay function. */ - - cycles = 8000 << 3; /* x8 (number of 1.25ns ticks) */ - - msr = 0x10; /* TSC */ - _RDMSR(msr, &lo, &hi); - saved = lo; - do { - _RDMSR(msr, &lo, &hi); - } while (lo - saved < cycles); -} - -static void transitionVid(u32 targetVid, u8 dev, u8 isNb) -{ - u32 currentVid, dtemp; - msr_t msr; - u8 vsTimecode; - u16 timeTable[8] = { 10, 20, 30, 40, 60, 100, 200, 500 }; - int vsTime; + set_pstate(0); + } - /* This function steps or slam the Nb VID to the target VID. - * It uses VSRampTime for [SlamVidMode]=0 ([PviMode]=1) - * or VSSlamTime for [SlamVidMode]=1 ([PviMode]=0)to time period. + /* missing step 7 (restore PstateMax to 0 if needed) because + * we skipped step 2 */ - /* get the current VID */ - msr = rdmsr(0xC0010071); - if (isNb) - currentVid = (msr.lo >> NB_VID_POS) & BIT_MASK_7; - else - currentVid = (msr.lo >> CPU_VID_POS) & BIT_MASK_7; - - /* Read MSRC001_0070 COFVID Control Register */ - msr = rdmsr(0xC0010070); - - /* check PVI/SPI */ - dtemp = pci_read_config32(dev, 0xA0); - if (dtemp & PVI_MODE) { /* PVI, step VID */ - if (currentVid < targetVid) { - while (currentVid < targetVid) { - currentVid++; - if (isNb) - msr.lo = (msr.lo & NB_VID_MASK_OFF) | (currentVid << NB_VID_POS); - else - msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (currentVid << CPU_VID_POS); - wrmsr(0xC0010070, msr); - - /* read F3xD8[VSRampTime] */ - dtemp = pci_read_config32(dev, 0xD8); - vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7); - vsTime = (int)timeTable[vsTimecode]; - do { - coreDelay(); - vsTime -= 40; - } while (vsTime > 0); - } - } else if (currentVid > targetVid) { - while (currentVid > targetVid) { - currentVid--; - if (isNb) - msr.lo = (msr.lo & NB_VID_MASK_OFF) | (currentVid << NB_VID_POS); - else - msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (currentVid << CPU_VID_POS); - wrmsr(0xC0010070, msr); - - /* read F3xD8[VSRampTime] */ - dtemp = pci_read_config32(dev, 0xD8); - vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7); - vsTime = (int)timeTable[vsTimecode]; - do { - coreDelay(); - vsTime -= 40; - } while (vsTime > 0); - } - } - } else { /* SVI, slam VID */ - if (isNb) - msr.lo = (msr.lo & NB_VID_MASK_OFF) | (targetVid << NB_VID_POS); - else - msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (targetVid << CPU_VID_POS); - wrmsr(0xC0010070, msr); - - /* read F3xD8[VSRampTime] */ - dtemp = pci_read_config32(dev, 0xD8); - vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7); - vsTime = (int)timeTable[vsTimecode]; - do { - coreDelay(); - vsTime -= 40; - } while (vsTime > 0); - } } static u32 needs_NB_COF_VID_update(void) @@ -633,8 +594,8 @@ static u32 needs_NB_COF_VID_update(void) for (i = 0; i < nodes; i++) { u32 cpuRev = mctGetLogicalCPUID(i) ; u32 nbCofVidUpdateDefined = (cpuRev & (AMD_FAM10_LT_D)); - if (nbCofVidUpdateDefined - && (pci_read_config32(NODE_PCI(i, 3), 0x1FC) + if (nbCofVidUpdateDefined + && (pci_read_config32(NODE_PCI(i, 3), 0x1FC) & NB_COF_VID_UPDATE_MASK)) { nb_cof_vid_update = 1; break; @@ -647,31 +608,29 @@ static u32 init_fidvid_core(u32 nodeid, u32 coreid) { device_t dev; u32 vid_max; - u32 fid_max=0; + u32 fid_max = 0; u8 nb_cof_vid_update = needs_NB_COF_VID_update(); u8 pvimode; u32 reg1fc; /* Steps 1-6 of BIOS NB COF and VID Configuration - * for SVI and Single-Plane PVI Systems. + * for SVI and Single-Plane PVI Systems. BKDG 2.4.2.9 #31116 rev 3.48 */ dev = NODE_PCI(nodeid, 3); - pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1; + pvimode = pci_read_config32(dev, PW_CTL_MISC) & PVI_MODE; reg1fc = pci_read_config32(dev, 0x1FC); if (nb_cof_vid_update) { - if (pvimode) { - vid_max = (reg1fc >> 7) & 0x7F; - fid_max = (reg1fc >> 2) & 0x1F; + vid_max = (reg1fc & SINGLE_PLANE_NB_VID_MASK ) >> SINGLE_PLANE_NB_VID_SHIFT ; + fid_max = (reg1fc & SINGLE_PLANE_NB_FID_MASK ) >> SINGLE_PLANE_NB_FID_SHIFT ; - /* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */ - fixPsNbVidBeforeWR(vid_max, coreid); - } else { /* SVI */ - vid_max = ((reg1fc >> 7) & 0x7F) - ((reg1fc >> 17) & 0x1F); - fid_max = ((reg1fc >> 2) & 0x1F) + ((reg1fc >> 14) & 0x7); - transitionVid(vid_max, dev, IS_NB); + if (!pvimode) { /* SVI, dual power plane */ + vid_max = vid_max - ((reg1fc & DUAL_PLANE_NB_VID_OFF_MASK ) >> DUAL_PLANE_NB_VID_SHIFT ); + fid_max = fid_max + ((reg1fc & DUAL_PLANE_NB_FID_OFF_MASK ) >> DUAL_PLANE_NB_FID_SHIFT ); } + /* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */ + fixPsNbVidBeforeWR(vid_max, coreid,dev,pvimode); /* fid setup is handled by the BSP at the end. */ @@ -691,7 +650,7 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid); - send = init_fidvid_core(nodeid,coreid); + send = init_fidvid_core(nodeid,coreid); send |= (apicid << 24); // ap apicid // Send signal to BSP about this AP max fid @@ -812,21 +771,6 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll) } while (msr.lo != StartupPstate); } -static void set_p0(void) -{ - msr_t msr; - - // Transition P0 for calling core. - msr = rdmsr(0xC0010062); - msr.lo = (msr.lo & ~0x07); - wrmsr(0xC0010062, msr); - - /* Wait for P0 to set. */ - do { - msr = rdmsr(0xC0010063); - } while (msr.lo != 0); -} - static void finalPstateChange(void) { /* Enble P0 on all cores for best performance. @@ -834,7 +778,7 @@ static void finalPstateChange(void) * It is safe since they will be in C1 halt * most of the time anyway. */ - set_p0(); + set_pstate(0); } static void init_fidvid_stage2(u32 apicid, u32 nodeid) diff --git a/src/northbridge/amd/amdht/AsPsDefs.h b/src/northbridge/amd/amdht/AsPsDefs.h index 0f6db9fc75..4c327e971c 100644 --- a/src/northbridge/amd/amdht/AsPsDefs.h +++ b/src/northbridge/amd/amdht/AsPsDefs.h @@ -231,6 +231,16 @@ /* F3x1FC Product Information Register */ #define NB_COF_VID_UPDATE_MASK 1 /* for CPU rev <= C */ +#define SINGLE_PLANE_NB_FID_MASK 0x007c/* for CPU rev <= C */ +#define SINGLE_PLANE_NB_FID_SHIFT 2/* for CPU rev <= C */ +#define SINGLE_PLANE_NB_VID_MASK 0x3f80/* for CPU rev <= C */ +#define SINGLE_PLANE_NB_VID_SHIFT 7/* for CPU rev <= C */ + +#define DUAL_PLANE_NB_FID_OFF_MASK 0x001c000/* for CPU rev <= C */ +#define DUAL_PLANE_NB_FID_SHIFT 14/* for CPU rev <= C */ +#define DUAL_PLANE_NB_VID_OFF_MASK 0x3e0000/* for CPU rev <= C */ +#define DUAL_PLANE_NB_VID_SHIFT 17/* for CPU rev <= C */ + #define NM_PS_REG 5 /* number of P-state MSR registers */ @@ -266,4 +276,9 @@ #define GH_REV_A2 0x4 /* GH Rev A2 logical ID, Upper half */ +#define TSC_MSR 0x10 +#define CUR_PSTATE_MSR 0xc0010063 + +#define WAIT_PSTATE_TIMEOUT 80000000 /* 0.1 s , unit : 1.25 ns */ + #endif diff --git a/src/northbridge/amd/amdmct/wrappers/mcti_d.c b/src/northbridge/amd/amdmct/wrappers/mcti_d.c index 0ef60acecd..584a220864 100644 --- a/src/northbridge/amd/amdmct/wrappers/mcti_d.c +++ b/src/northbridge/amd/amdmct/wrappers/mcti_d.c @@ -339,9 +339,6 @@ static void mctHookAfterDramInit(void) { } -static void coreDelay (void); - - #if (CONFIG_DIMM_SUPPORT & 0x000F)==0x0005 /* AMD_FAM10_DDR3 */ /* Erratum 350 */ static void vErrata350(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat) @@ -408,10 +405,10 @@ static void vErrata350(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTs static void vErratum372(struct DCTStatStruc *pDCTstat) { msr_t msr = rdmsr(NB_CFG_MSR); - + int nbPstate1supported = ! (msr.hi && (1 << (NB_GfxNbPstateDis -32))) ; - // is this the right way to check for NB pstate 1 or DDR3-1333 ? + // is this the right way to check for NB pstate 1 or DDR3-1333 ? if (((pDCTstat->PresetmaxFreq==1333)||(nbPstate1supported)) &&(!pDCTstat->GangedMode)) { /* DisableCf8ExtCfg */ @@ -423,14 +420,14 @@ static void vErratum372(struct DCTStatStruc *pDCTstat) static void vErratum414(struct DCTStatStruc *pDCTstat) { int dct=0; - for(; dct < 2 ; dct++) + for(; dct < 2 ; dct++) { - int dRAMConfigHi = Get_NB32(pDCTstat->dev_dct,0x94 + (0x100 * dct)); + int dRAMConfigHi = Get_NB32(pDCTstat->dev_dct,0x94 + (0x100 * dct)); int powerDown = dRAMConfigHi && (1 << PowerDownEn ) ; int ddr3 = dRAMConfigHi && (1 << Ddr3Mode ) ; int dRAMMRS = Get_NB32(pDCTstat->dev_dct,0x84 + (0x100 * dct)); int pchgPDModeSel = dRAMMRS && (1 << PchgPDModeSel ) ; - if (powerDown && ddr3 && pchgPDModeSel ) + if (powerDown && ddr3 && pchgPDModeSel ) { Set_NB32(pDCTstat->dev_dct,0x84 + (0x100 * dct), dRAMMRS & ~(1 << PchgPDModeSel) ); } |