Next step. Kill auto.c and failover.c and clean up Config.lb for

tyan/s2735
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895

Abuild log is completely identical with and without the patch.


Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4050 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

25 files changed, 0 insertions, 2783 deletions

diff --git a/src/mainboard/tyan/s2735/auto.c b/src/mainboard/tyan/s2735/auto.c
deleted file mode 100644
index 456c342b62..0000000000
--- a/src/mainboard/tyan/s2735/auto.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-
-#include "arch/i386/lib/console.c"
-
-#include "ram/ramtest.c"
-#include "southbridge/intel/i82801er/i82801er_early_smbus.c"
-#include "northbridge/intel/e7501/raminit.h"
-#if 0
-#include "cpu/intel/model_f2x/apic_timer.c"
-#include "lib/delay.c"
-#endif
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
-        outb(0x0e, 0x0cf9);
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-        /* nothing to do */
-}
- 
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/intel/e7501/raminit.c"
-#include "northbridge/intel/e7501/reset_test.c"
-#include "sdram/generic_sdram.c"
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller memctrl[] = {
-		{
-			.d0 = PCI_DEV(0, 0, 0),
-			.d0f1 = PCI_DEV(0, 0, 1),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
-			.channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
-		},
-	};
-
-        if (bist == 0) {
-                /* Skip this if there was a built in self test failure */
-                early_mtrr_init();
-                enable_lapic();
-//                init_timer();
-
-        }
-
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();
-        console_init();
-
-        /* Halt if there was a built in self test failure */
-//	report_bist_failure(bist);
-
-//        setup_default_resource_map();
-#if 0
-	print_pci_devices();
-#endif
-	if(!bios_reset_detected()) {
-        	enable_smbus();
-#if 0
-    		dump_spd_registers(&memctrl[0]);
-//        	dump_smbus_registers();
-#endif
-
-		memreset_setup();
-		sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
-	} 
-#if 0
-	else {
-		        /* clear memory 1meg */
-        __asm__ volatile(
-                "1: \n\t"
-                "movl %0, %%fs:(%1)\n\t"
-                "addl $4,%1\n\t"
-                "subl $4,%2\n\t"
-                "jnz 1b\n\t"
-                :
-                : "a" (0), "D" (0), "c" (1024*1024)
-                ); 
-	
-	}
-#endif
-
-#if 0
-	dump_pci_devices();
-#endif
-#if 1
-	dump_pci_device(PCI_DEV(0, 0, 0));
-#endif
-
-#if 0
-	msr_t msr;
-	msr = rdmsr(TOP_MEM2);
-	print_debug("TOP_MEM2: ");
-	print_debug_hex32(msr.hi);
-	print_debug_hex32(msr.lo);
-	print_debug("\r\n");
-#endif
-
-#if 0
-	ram_check(0x00000000, msr.lo+(msr.hi<<32));
-#endif
-
-#if 0
-	// Check 16MB of memory @ 0
-	ram_check(0x00000000, 0x01000000);
-	// Check 16MB of memory @ 2GB 
-//	ram_check(0x80000000, 0x81000000);
-#endif
-
-}
diff --git a/src/mainboard/tyan/s2735/failover.c b/src/mainboard/tyan/s2735/failover.c
deleted file mode 100644
index 91cd69317c..0000000000
--- a/src/mainboard/tyan/s2735/failover.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/intel/i82801er/cmos_failover.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else  {
-
-		check_cmos_failed();		
-
-		if (do_normal_boot()) {
-			goto normal_image;
-		}
-		else {
-			goto fallback_image;
-		}
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
-#if 0
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
-#endif
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2850/auto.c b/src/mainboard/tyan/s2850/auto.c
deleted file mode 100644
index bec1afabbd..0000000000
--- a/src/mainboard/tyan/s2850/auto.c
+++ /dev/null
@@ -1,203 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-#define REV_B_RESET 0
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (0 << 0), SMBUS_IO_BASE + 0xc0 + 16);	//REVC_MEMRST_EN=0
-	} else {
-		outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (1 << 0), SMBUS_IO_BASE + 0xc0 + 16);	//REVC_MEMRST_EN=1
-	}
-	outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
-	     (0 << 0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (1 << 0), SMBUS_IO_BASE + 0xc0 + 17);	//REVB_MEMRST_L=1
-		udelay(90);
-	}
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
-static void main(unsigned long bist)
-{
-	/*
-	 * GPIO28 of 8111 will control H0_MEMRESET_L
-	 * GPIO29 of 8111 will control H1_MEMRESET_L
-	 */
-	static const struct mem_controller cpu[] = {
-		{
-		 .node_id = 0,
-		 .f0 = PCI_DEV(0, 0x18, 0),
-		 .f1 = PCI_DEV(0, 0x18, 1),
-		 .f2 = PCI_DEV(0, 0x18, 2),
-		 .f3 = PCI_DEV(0, 0x18, 3),
-		 .channel0 = {(0xa << 3) | 0, (0xa << 3) | 2, 0, 0},
-		 .channel1 = {(0xa << 3) | 1, (0xa << 3) | 3, 0, 0},
-		 },
-	};
-
-	int needs_reset;
-
-#if CONFIG_LOGICAL_CPUS==1
-        struct node_core_id id;
-#else
-        unsigned nodeid;
-#endif
-
-        if (bist == 0) {
-                /* Skip this if there was a built in self test failure */
-                amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
-                set_apicid_cpuid_lo();
-#endif
-
-                enable_lapic();
-                init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
-                id = get_node_core_id_x();
-                if(id.coreid == 0) {
-                        if (cpu_init_detected(id.nodeid)) {
-                                asm volatile ("jmp __cpu_reset");
-                        }
-                        distinguish_cpu_resets(id.nodeid);
-                }
-#else
-                nodeid = lapicid();
-                if (cpu_init_detected(nodeid)) {
-                        asm volatile ("jmp __cpu_reset");
-                }
-                distinguish_cpu_resets(nodeid);
-#endif
-
-                if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1 
-                        || (id.coreid != 0)
-#endif
-                ) {
-                        stop_this_cpu(); 
-                }
-        }
-                        
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-        report_bist_failure(bist);
-
-	setup_default_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
-        start_other_cores();
-#endif
-	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2850/failover.c b/src/mainboard/tyan/s2850/failover.c
deleted file mode 100644
index fee04156a4..0000000000
--- a/src/mainboard/tyan/s2850/failover.c
+++ /dev/null
@@ -1,89 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-#if CONFIG_LOGICAL_CPUS==1
-        struct node_core_id id;
-#else   
-        unsigned nodeid;
-#endif          
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-#if CONFIG_LOGICAL_CPUS==1
-        id = get_node_core_id_x();
-        /* Is this a cpu only reset? */
-        if (cpu_init_detected(id.nodeid)) {
-#else
-        nodeid = lapicid();
-        /* Is this a cpu only reset? */
-        if (cpu_init_detected(nodeid)) {
-#endif
-
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-#if 0
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
-#endif
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb
index 1ea34f2644..dd7ee53b96 100644
--- a/src/mainboard/tyan/s2875/Config.lb
+++ b/src/mainboard/tyan/s2875/Config.lb
@@ -45,8 +45,6 @@ driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -64,31 +62,6 @@ makerule ./auto.inc
 end
 
 end
-else
-  
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +72,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,7 +79,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -145,12 +108,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
-       ldscript /arch/i386/lib/failover.lds
-else
        ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -160,28 +118,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c
deleted file mode 100644
index e988a005e7..0000000000
--- a/src/mainboard/tyan/s2875/auto.c
+++ /dev/null
@@ -1,173 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
- 
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-        int needs_reset;
-
-        if (bist == 0) {
-		k8_init_and_stop_secondaries();
-        }
-
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_default_resource_map();
-        needs_reset = setup_coherent_ht_domain();
-
-        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-
-	enable_smbus();
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2875/failover.c b/src/mainboard/tyan/s2875/failover.c
deleted file mode 100644
index ebc5a5da9e..0000000000
--- a/src/mainboard/tyan/s2875/failover.c
+++ /dev/null
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index 7e8007d6cf..a18904bcfa 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -45,8 +45,6 @@ driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -64,31 +62,6 @@ makerule ./auto.inc
 end
 
 end
-else
-
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +72,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,7 +79,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -145,12 +108,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
-       ldscript /arch/i386/lib/failover.lds
-else
        ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -160,28 +118,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c
deleted file mode 100644
index 623a345c02..0000000000
--- a/src/mainboard/tyan/s2880/auto.c
+++ /dev/null
@@ -1,173 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-#include "northbridge/amd/amdk8/resourcemap.c" 
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, 0, 0, 0 },
-			.channel1 = { (0xa<<3)|5, 0, 0, 0 },
-		},
-#endif
-	};
-        int needs_reset;
-
-        if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-        }
-                        
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_default_resource_map();
-        needs_reset = setup_coherent_ht_domain();
-
-        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-	
-}
diff --git a/src/mainboard/tyan/s2880/failover.c b/src/mainboard/tyan/s2880/failover.c
deleted file mode 100644
index 6b7eda80be..0000000000
--- a/src/mainboard/tyan/s2880/failover.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb
index 283d8c6bb4..a02d408bb9 100644
--- a/src/mainboard/tyan/s2881/Config.lb
+++ b/src/mainboard/tyan/s2881/Config.lb
@@ -44,7 +44,6 @@ driver mainboard.o
 object get_bus_conf.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
 
 if CONFIG_USE_INIT
 
@@ -63,32 +62,6 @@ makerule ./auto.inc
 end
 
 end
-else
-
-
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +72,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,7 +79,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -145,12 +108,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
-       ldscript /arch/i386/lib/failover.lds
-else
        ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -160,28 +118,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c
deleted file mode 100644
index ea339fe5bd..0000000000
--- a/src/mainboard/tyan/s2881/auto.c
+++ /dev/null
@@ -1,178 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-//#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-        int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
-        struct node_core_id id;
-#else
-        unsigned nodeid;
-#endif
-
-        if (bist == 0) {
-                k8_init_and_stop_secondaries();
-        }
-
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-//        report_bist_failure(bist);
-
-        setup_s2881_resource_map();
-        needs_reset = setup_coherent_ht_domain();
-        // automatically set that for you, but you might meet tight space
-        needs_reset |= ht_setup_chains_x();
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-	
-	enable_smbus();
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2881/failover.c b/src/mainboard/tyan/s2881/failover.c
deleted file mode 100644
index ebc5a5da9e..0000000000
--- a/src/mainboard/tyan/s2881/failover.c
+++ /dev/null
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index 2e98c644ec..511d29df55 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -45,8 +45,6 @@ driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -64,31 +62,6 @@ makerule ./auto.inc
 end
 
 end
-else
-
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +72,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,7 +79,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -145,12 +108,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
-       ldscript /arch/i386/lib/failover.lds
-else
        ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -160,28 +118,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c
deleted file mode 100644
index 53b25a2c24..0000000000
--- a/src/mainboard/tyan/s2882/auto.c
+++ /dev/null
@@ -1,182 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-#define REV_B_RESET 0
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-        /* nothing to do */
-}
- 
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	/*
-	 * GPIO28 of 8111 will control H0_MEMRESET_L
-	 * GPIO29 of 8111 will control H1_MEMRESET_L
-	 */
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-        
-	int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
-        struct node_core_id id;
-#else
-        unsigned nodeid;
-#endif
-
-        if (bist == 0) {
-        	k8_init_and_stop_secondaries();
-	}
-
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();
-        console_init();
-
-        /* Halt if there was a built in self test failure */
-//        report_bist_failure(bist);
-
-        setup_default_resource_map();
-        needs_reset = setup_coherent_ht_domain();
-        needs_reset |= ht_setup_chains_x();
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }	
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2882/failover.c b/src/mainboard/tyan/s2882/failover.c
deleted file mode 100644
index 6b7eda80be..0000000000
--- a/src/mainboard/tyan/s2882/failover.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index a763e019e7..5ecbd4598b 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -45,8 +45,6 @@ object get_bus_conf.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -64,31 +62,6 @@ makerule ./auto.inc
 end
 
 end
-else
-  
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +72,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,7 +79,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -145,12 +108,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
-       ldscript /arch/i386/lib/failover.lds
-else
        ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -160,28 +118,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
deleted file mode 100644
index c926487d5a..0000000000
--- a/src/mainboard/tyan/s2885/auto.c
+++ /dev/null
@@ -1,186 +0,0 @@
-#define ASSEMBLY 1
- 
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue;
-                }
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {
-                        return (config_map >> 16) & 0xff;
-                }
-        }
-        return 0;
-}
-
-static void hard_reset(void)
-{
-	device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
-	set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-//#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-
-#if 0
-        #define ENABLE_APIC_EXT_ID 1
-        #define APIC_ID_OFFSET 0x10
-        #define LIFT_BSP_APIC_ID 0
-#else                   
-        #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c" 
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-static void main(unsigned long bist)
-{
-        static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-                {
-                        .node_id = 0,
-                        .f0 = PCI_DEV(0, 0x18, 0),
-                        .f1 = PCI_DEV(0, 0x18, 1),
-                        .f2 = PCI_DEV(0, 0x18, 2),
-                        .f3 = PCI_DEV(0, 0x18, 3),
-                        .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-                        .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-                },
-#endif
-#if SECOND_CPU
-                {
-                        .node_id = 1,
-                        .f0 = PCI_DEV(0, 0x19, 0),
-                        .f1 = PCI_DEV(0, 0x19, 1),
-                        .f2 = PCI_DEV(0, 0x19, 2),
-                        .f3 = PCI_DEV(0, 0x19, 3),
-                        .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-                        .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-                },
-#endif
-        };
-
-        int needs_reset;
-
-	if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-	}
-	
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();
-        console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_s2885_resource_map();
-        needs_reset = setup_coherent_ht_domain();
-
-	// automatically set that for you, but you might meet tight space
-        needs_reset |= ht_setup_chains_x();
-
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-
-	enable_smbus();
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-
-
-}
diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c
deleted file mode 100644
index abd2042cd8..0000000000
--- a/src/mainboard/tyan/s2885/failover.c
+++ /dev/null
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-	/* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-	/* Is this a cpu only reset? */
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c
deleted file mode 100644
index aab040f6d2..0000000000
--- a/src/mainboard/tyan/s2891/auto.c
+++ /dev/null
@@ -1,151 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-#define K8_HT_FREQ_1G_SUPPORT 0
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* full reset */
-	outb(0x0a, 0x0cf9);
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-#if 1
-	/* link reset */
-	outb(0x02, 0x0cf9);
-	outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU	1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
-	struct node_core_id id;
-#else
-	unsigned nodeid;
-#endif
-
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_s2891_resource_map();
-
-	needs_reset = setup_coherent_ht_domain();
-
-	needs_reset |= ht_setup_chains_x();
-
-	needs_reset |= ck804_early_setup_x();
-
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2891/failover.c b/src/mainboard/tyan/s2891/failover.c
deleted file mode 100644
index 1d85c0129b..0000000000
--- a/src/mainboard/tyan/s2891/failover.c
+++ /dev/null
@@ -1,96 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static void sio_setup(void)
-{
-        
-        unsigned value;
-	uint32_t dword;
-	uint8_t byte;
-
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
-        byte |= 0x20; 
-        pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-	
-	dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
-	dword |= (1<<0) | (1<<1);  
-	pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if 1
-        dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4);
-        dword |= (1<<16);  
-        pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
-
-#endif
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected(nodeid)) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c
deleted file mode 100644
index bce2bbda4d..0000000000
--- a/src/mainboard/tyan/s2892/auto.c
+++ /dev/null
@@ -1,153 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-#define K8_HT_FREQ_1G_SUPPORT 1
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* full reset */
-	outb(0x0a, 0x0cf9);
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-#if 1
-	/* link reset */
-	outb(0x02, 0x0cf9);
-	outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU	1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-//set GPIO to input mode
-#define CK804_MB_SETUP \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
-
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-
- 	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-//	report_bist_failure(bist);
-
-	setup_s2892_resource_map();
-
-	needs_reset = setup_coherent_ht_domain();
-
-	needs_reset |= ht_setup_chains_x();
-
-	needs_reset |= ck804_early_setup_x();
-
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2892/failover.c b/src/mainboard/tyan/s2892/failover.c
deleted file mode 100644
index 2d90e37cdd..0000000000
--- a/src/mainboard/tyan/s2892/failover.c
+++ /dev/null
@@ -1,90 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static void sio_setup(void)
-{
-        
-        unsigned value;
-	uint32_t dword;
-	uint8_t byte;
-
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
-        byte |= 0x20; 
-        pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-	
-	dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
-	dword |= (1<<0);  
-	pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c
deleted file mode 100644
index 6663f23f3b..0000000000
--- a/src/mainboard/tyan/s2895/auto.c
+++ /dev/null
@@ -1,178 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-//#define K8_HT_FREQ_1G_SUPPORT 1
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "cpu/amd/model_fxx/model_fxx_msr.h"
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* full reset */
-	outb(0x0a, 0x0cf9);
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-#if 1
-	/* link reset */
-	outb(0x02, 0x0cf9);
-	outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-	
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_gpio_setup(void){
-
-	unsigned value;
-
-//	lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c
-	lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L 
-	value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
-	lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU	1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 2
-#define CK804B_BUSN 0x80
-#define CK804_USE_NIC 1
-#define CK804_USE_ACI 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-//set GPIO to input mode
-#define CK804_MB_SETUP \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/	\
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/	\
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/	\
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/	\
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
-
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-
-	lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	sio_gpio_setup();
-
-	setup_s2895_resource_map();
-
-	needs_reset = setup_coherent_ht_domain();
-
-	needs_reset |= ht_setup_chains_x();
-
-	needs_reset |= ck804_early_setup_x();
-
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s2895/failover.c b/src/mainboard/tyan/s2895/failover.c
deleted file mode 100644
index 87f4685ae8..0000000000
--- a/src/mainboard/tyan/s2895/failover.c
+++ /dev/null
@@ -1,108 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-
-#include <device/pnp_def.h>  
-
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_setup(void)
-{
-        
-        unsigned value;
-	uint32_t dword;
-	uint8_t byte;
-
-        pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);  
-
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
-        byte |= 0x20; 
-        pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-	
-	dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
-	dword |= (1<<29)|(1<<0);  
-	pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if  1
-        lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
-
-	value =  lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
-	value &= 0xbf;
-        lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
-#endif
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}