mb/google/brya/var/bujia: Add devicetree based on schematics

Add devicetree settings per the schematic.
Differences to gladios:
1. remove SD reader
2. remove EMMC setting
3. modify USB port distribution

FRONT
-------------------------------------------------------
|                                        A3   A1      |
|               C0                       A2   A0      |
-------------------------------------------------------

BACK
-------------------------------------------------------
|                    ---------------                  |
|                    |    TX25A    |                  |
-------------------------------------------------------

BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot

Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>

1 files changed, 314 insertions, 2 deletions

diff --git a/src/mainboard/google/brya/variants/bujia/overridetree.cb b/src/mainboard/google/brya/variants/bujia/overridetree.cb
index 4f2c04a57a..9d7e4ce8d9 100644
--- a/src/mainboard/google/brya/variants/bujia/overridetree.cb
+++ b/src/mainboard/google/brya/variants/bujia/overridetree.cb
@@ -1,6 +1,318 @@
 chip soc/intel/alderlake
+	register "sagv" = "SaGv_Enabled"
 
-        device domain 0 on
-        end
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field	     |	Value			 |
+	#+-------------------+---------------------------+
+	#| GSPI1	     | NC			 |
+	#| I2C0		     | Audio			 |
+	#| I2C1		     | cr50 TPM. Early init is	 |
+	#|		     | required to set up a BAR  |
+	#|		     | for TPM communication	 |
+	#| I2C3		     | NC			 |
+	#| I2C5		     | NC			 |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 600,
+			.fall_time_ns = 400,
+			.data_hold_time_ns = 50,
+		},
+		.i2c[1] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 600,
+			.fall_time_ns = 400,
+			.data_hold_time_ns = 50,
+		},
+	}"
 
+	register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"	# Type-A Port A2
+	register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# Type-A Port A3
+	register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 Port 3 - Port 5 for OPS interface
+	register "usb2_ports[6]" = "USB2_PORT_EMPTY"		# Disable Port 6
+
+	register "usb3_ports[2]" = "USB3_PORT_EMPTY "		# Disable Port 2
+	# USB3 Port 3 for OPS interface
+
+	register "tcss_ports[1]" = "TCSS_PORT_EMPTY"		# Disable Port1
+	register "tcss_ports[2]" = "TCSS_PORT_EMPTY"		# Disable Port2
+
+	register "serial_io_gspi_mode" = "{
+		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+		[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
+	}"
+
+	register "ddi_ports_config" = "{
+		[DDI_PORT_A] = DDI_ENABLE_HPD,
+		[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
+		[DDI_PORT_1] = DDI_ENABLE_HPD,
+		[DDI_PORT_3] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
+	}"
+
+	device domain 0 on
+		device ref dtt on
+			chip drivers/intel/dptf
+				## sensor information
+				register "options.tsr[0].desc" = ""DRAM""
+				register "options.tsr[1].desc" = ""Charger""
+
+				# TODO: below values are initial reference values only
+				## Active Policy
+				register "policies.active" = "{
+					[0] = {
+						.target = DPTF_CPU,
+						.thresholds = {
+								TEMP_PCT(85, 90),
+								TEMP_PCT(80, 80),
+								TEMP_PCT(75, 70),
+						}
+					}
+				}"
+
+				## Passive Policy
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU,		CPU,	       95, 5000),
+					[1] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_0, 75, 5000),
+					[2] = DPTF_PASSIVE(CHARGER,	TEMP_SENSOR_1, 75, 5000),
+				}"
+
+				## Critical Policy
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,	       105, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0,	85, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1,	85, SHUTDOWN),
+				}"
+
+				register "controls.power_limits" = "{
+					.pl1 = {
+							.min_power = 3000,
+							.max_power = 15000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 200,
+						},
+					.pl2 = {
+							.min_power = 55000,
+							.max_power = 55000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 1000,
+						}
+				}"
+
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 1700 },
+					[1] = {  24, 1500 },
+					[2] = {  16, 1000 },
+					[3] = {   8,  500 }
+				}"
+
+				## Fan Performance Control (Percent, Speed, Noise, Power)
+				register "controls.fan_perf" = "{
+					[0] = {  90, 6700, 220, 2200, },
+					[1] = {  80, 5800, 180, 1800, },
+					[2] = {  70, 5000, 145, 1450, },
+					[3] = {  60, 4900, 115, 1150, },
+					[4] = {  50, 3838,  90,  900, },
+					[5] = {  40, 2904,  55,  550, },
+					[6] = {  30, 2337,  30,  300, },
+					[7] = {  20, 1608,  15,  150, },
+					[8] = {  10,  800,  10,  100, },
+					[9] = {   0,	0,   0,   50, }
+				}"
+
+				## Fan options
+				register "options.fan.fine_grained_control" = "1"
+				register "options.fan.step_size" = "2"
+
+				device generic 0 alias dptf_policy on end
+			end
+		end
+		device ref pcie4_0 on
+			# Enable CPU PCIE RP 1 using CLK 0
+			register "cpu_pcie_rp[CPU_RP(1)]" = "{
+				.clk_req = 0,
+				.clk_src = 0,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+		end #NVME
+		device ref tbt_pcie_rp1 off end
+		device ref tbt_pcie_rp2 off end
+
+		device ref tcss_dma0 on
+			chip drivers/intel/usb4/retimer
+				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
+				use tcss_usb3_port1 as dfp[0].typec_port
+				device generic 0 on end
+			end
+		end
+		device ref tcss_dma1 off end
+		device ref cnvi_wifi on
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_PME_B0"
+				device generic 0 on end
+			end
+		end
+		device ref i2c0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5650""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5650""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-mode""
+				register "property_list[0].integer" = "2"
+				device i2c 1a on end
+			end
+		end # I2C0
+		device ref i2c1 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
+				device i2c 50 on end
+			end
+		end # I2C1
+		device ref pcie_rp7 on
+			chip drivers/net
+				register "wake" = "GPE0_DW0_07"
+				register "customized_leds" = "0x060f"
+				register "enable_aspm_l1_2" = "1"
+				register "add_acpi_dma_property" = "true"
+				device pci 00.0 on end
+			end
+		end # RTL8111 Ethernet NIC
+		device ref pcie_rp8 off end # disable SD reader
+		device ref gspi1 off end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port1 as usb2_port
+						use tcss_usb3_port1 as usb3_port
+						device generic 0 alias conn0 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref tcss_usb3_port1 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A3 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(2, 1))"
+						register "custom_pld.vertical_position" = "PLD_VERTICAL_POSITION_UPPER"
+						device ref usb2_port2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A2 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(3, 1))"
+						register "custom_pld.vertical_position" = "PLD_VERTICAL_POSITION_LOWER"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 OPS interface TX25A""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(4, 1))"
+						device ref usb2_port4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 OPS interface TX25A""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(5, 1))"
+						device ref usb2_port5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 OPS interface TX25A""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(6, 1))"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(7, 1))"
+						register "custom_pld.vertical_position" = "PLD_VERTICAL_POSITION_UPPER"
+						device ref usb2_port8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(8, 1))"
+						register "custom_pld.vertical_position" = "PLD_VERTICAL_POSITION_LOWER"
+						device ref usb2_port9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port10 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(8, 1))"
+						register "custom_pld.vertical_position" = "PLD_VERTICAL_POSITION_LOWER"
+						device ref usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(7, 1))"
+						register "custom_pld.vertical_position" = "PLD_VERTICAL_POSITION_UPPER"
+						device ref usb3_port2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 OPS interface TX25A""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(4, 1))"
+						device ref usb3_port4 on end
+					end
+				end
+			end
+		end
+	end
 end