aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSridhar Siricilla <sridhar.siricilla@intel.com>2019-11-27 14:55:16 +0530
committerPatrick Georgi <pgeorgi@google.com>2020-02-09 19:20:00 +0000
commitff072e6ebfb4f3cf5736e317688930e588a62ec2 (patch)
treee8407b4b4a18673002079a1a2e9a381c1ec3f2e0
parent8e4654527ef5fec658ca5aacad0612653d3dcf30 (diff)
soc/intel/common: Rename functions for consistent naming
Below changes are done: 1. Rename below functions to have consistent naming: set_host_ready() -> cse_set_host_ready() wait_cse_sec_override_mode() -> cse_wait_sec_override_mode() send_hmrfpo_enable_msg() -> cse_hmrfpo_enable() send_hmrfpo_get_status_msg() -> cse_hmrfpo_get_status() 2. Additional debug messages are added in cse_wait_sec_override_mode(). TEST=Build and Boot hatch board. Change-Id: Icfcf1631cc37faacdea9ad84be55f5710104bad5 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
-rw-r--r--src/soc/intel/common/block/cse/cse.c19
-rw-r--r--src/soc/intel/common/block/include/intelblocks/cse.h12
2 files changed, 17 insertions, 14 deletions
diff --git a/src/soc/intel/common/block/cse/cse.c b/src/soc/intel/common/block/cse/cse.c
index 440b59b819..8fbaba5a2c 100644
--- a/src/soc/intel/common/block/cse/cse.c
+++ b/src/soc/intel/common/block/cse/cse.c
@@ -271,7 +271,7 @@ bool cse_is_hfs1_com_soft_temp_disable(void)
}
/* Makes the host ready to communicate with CSE */
-void set_host_ready(void)
+void cse_set_host_ready(void)
{
uint32_t csr;
csr = read_host_csr();
@@ -280,17 +280,20 @@ void set_host_ready(void)
write_host_csr(csr);
}
-/* Polls for ME state 'HECI_OP_MODE_SEC_OVERRIDE' for 15 seconds */
-uint8_t wait_cse_sec_override_mode(void)
+/* Polls for ME mode ME_HFS1_COM_SECOVER_MEI_MSG for 15 seconds */
+uint8_t cse_wait_sec_override_mode(void)
{
struct stopwatch sw;
stopwatch_init_msecs_expire(&sw, HECI_DELAY_READY);
while (!cse_is_hfs1_com_secover_mei_msg()) {
udelay(HECI_DELAY);
- if (stopwatch_expired(&sw))
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "HECI: Timed out waiting for SEC_OVERRIDE mode!\n");
return 0;
+ }
}
-
+ printk(BIOS_DEBUG, "HECI: CSE took %lu ms to enter security override mode\n",
+ stopwatch_duration_msecs(&sw));
return 1;
}
@@ -544,7 +547,7 @@ int heci_reset(void)
if (wait_heci_ready()) {
/* Device is back on its imaginary feet, clear reset */
- set_host_ready();
+ cse_set_host_ready();
return 1;
}
@@ -622,7 +625,7 @@ int send_heci_reset_req_message(uint8_t rst_type)
}
/* Sends HMRFPO Enable command to CSE */
-int send_hmrfpo_enable_msg(void)
+int cse_hmrfpo_enable(void)
{
struct hmrfpo_enable_msg {
struct mkhi_hdr hdr;
@@ -682,7 +685,7 @@ failed:
* Sends HMRFPO Get Status command to CSE to get the HMRFPO status.
* The status can be DISABLES/LOCKED/ENABLED
*/
-int send_hmrfpo_get_status_msg(void)
+int cse_hmrfpo_get_status(void)
{
struct hmrfpo_get_status_msg {
struct mkhi_hdr hdr;
diff --git a/src/soc/intel/common/block/include/intelblocks/cse.h b/src/soc/intel/common/block/include/intelblocks/cse.h
index 46730707c8..6233f7d193 100644
--- a/src/soc/intel/common/block/include/intelblocks/cse.h
+++ b/src/soc/intel/common/block/include/intelblocks/cse.h
@@ -51,7 +51,7 @@ enum {
PCI_ME_HFSTS6 = 0x6C,
};
-/* HECI Message Header */
+/* MKHI Message Header */
struct mkhi_hdr {
uint8_t group_id;
uint8_t command:7;
@@ -103,14 +103,14 @@ uint32_t me_read_config32(int offset);
*/
bool is_cse_enabled(void);
-/* Makes the host ready to communicate with CSE*/
-void set_host_ready(void);
+/* Makes the host ready to communicate with CSE */
+void cse_set_host_ready(void);
/*
* Polls for ME state 'HECI_OP_MODE_SEC_OVERRIDE' for 15 seconds.
* Returns 0 on failure and 1 on success.
*/
-uint8_t wait_cse_sec_override_mode(void);
+uint8_t cse_wait_sec_override_mode(void);
/*
* Sends GLOBAL_RESET_REQ cmd to CSE.The reset type can be
@@ -123,14 +123,14 @@ int send_heci_reset_req_message(uint8_t rst_type);
* Send HMRFPO_ENABLE command.
* returns 0 on failure and 1 on success.
*/
-int send_hmrfpo_enable_msg(void);
+int cse_hmrfpo_enable(void);
/*
* Send HMRFPO_GET_STATUS command.
* returns -1 on failure and 0 (DISABLED)/ 1 (LOCKED)/ 2 (ENABLED)
* on success.
*/
-int send_hmrfpo_get_status_msg(void);
+int cse_hmrfpo_get_status(void);
/* Fixed Address MEI Header's Host Address field value */
#define BIOS_HOST_ADDR 0x00