summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2006-05-02 03:07:11 +0000
committerRonald G. Minnich <rminnich@gmail.com>2006-05-02 03:07:11 +0000
commitd3ba4aaa245b1af50f70443ba01ec0baf883995f (patch)
tree86ef1da57a3c72ff0c83f8429b74d13a6c1cb7b6
parentae3cbe951b414d9c2d2338f77e00132f7251cf94 (diff)
Fall back to pre-broken settings and setup for GX2.
We lost a few things, but this is still worth it. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2287 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/cpu/amd/model_gx2/cpureginit.c205
-rw-r--r--src/cpu/amd/model_gx2/model_gx2_init.c5
-rw-r--r--src/cpu/amd/model_gx2/syspreinit.c15
-rw-r--r--src/include/cpu/amd/gx2def.h10
-rw-r--r--src/mainboard/amd/rumba/auto.c20
-rw-r--r--src/mainboard/olpc/rev_a/Config.lb1
-rw-r--r--src/northbridge/amd/gx2/northbridge.c185
-rw-r--r--src/northbridge/amd/gx2/northbridgeinit.c67
-rw-r--r--src/northbridge/amd/gx2/raminit.c171
-rw-r--r--src/southbridge/amd/cs5536/cs5536.c3
-rw-r--r--src/southbridge/amd/cs5536/cs5536_early_setup.c2
-rw-r--r--targets/amd/rumba/Config.nofallback.lb1
12 files changed, 361 insertions, 324 deletions
diff --git a/src/cpu/amd/model_gx2/cpureginit.c b/src/cpu/amd/model_gx2/cpureginit.c
index a1f55fe762..f2802b67ca 100644
--- a/src/cpu/amd/model_gx2/cpureginit.c
+++ b/src/cpu/amd/model_gx2/cpureginit.c
@@ -9,8 +9,7 @@
/* **/
/* ***************************************************************************/
static void
-BIST(void)
-{
+BIST(void){
int msrnum;
msr_t msr;
@@ -25,8 +24,8 @@ BIST(void)
msrnum = CPU_DM_BIST;
wrmsr(msrnum, msr);
- outb(POST_CPU_DM_BIST_FAILURE, 0x80); /* 0x29*/
- msr = rdmsr(msrnum); /* read back for pass fail*/
+ outb(POST_CPU_DM_BIST_FAILURE , 0x80); /* 0x29*/
+ msr = rdmsr(msrnum); /* read back for pass fail*/
msr.lo &= 0x0F3FF0000;
if (msr.lo != 0xfeff0000)
goto BISTFail;
@@ -42,115 +41,108 @@ BIST(void)
msrnum = CPU_FP_UROM_BIST;
wrmsr(msrnum, msr);
- outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/
- inb(0x80); /* IO delay*/
- msr = rdmsr(msrnum); /* read back for pass fail*/
+ outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/
+ inb(0x80); /* IO delay*/
+ msr = rdmsr(msrnum); /* read back for pass fail*/
while ((msr.lo&0x884) != 0x884)
- msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/
+ msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/
if ((msr.lo&0x642) != 0x642)
goto BISTFail;
- msr.lo = msr.hi = 0; /* clear FPU BIST bits*/
+
+ msr.lo = msr.hi = 0; /* clear FPU BIST bits*/
msrnum = CPU_FP_UROM_BIST;
wrmsr(msrnum, msr);
+
/* BTB*/
msr.lo = 0x000000303;
msr.hi = 0x000000000;
msrnum = CPU_PF_BTBRMA_BIST;
wrmsr(msrnum, msr);
- outb(POST_CPU_BTB_BIST_FAILURE, 0x80); /* 0x8A*/
- msr = rdmsr(msrnum); /* read back for pass fail*/
+ outb(POST_CPU_BTB_BIST_FAILURE , 0x80); /* 0x8A*/
+ msr = rdmsr(msrnum); /* read back for pass fail*/
if ((msr.lo & 0x3030) != 0x3030)
goto BISTFail;
return;
+
BISTFail:
print_err("BIST failed!\n");
while(1);
}
-
-void BTM_enable(void)
-{
- int msrnum;
- msr_t msr;
- /* Set Diagnostic Mode */
- msrnum = CPU_GLD_MSR_DIAG;
- msr.hi = 0;
- msr.lo = DIAG_SEL1_SET | DIAG_SET0_SET;
- wrmsr(msrnum, msr);
-
- /* Set up GLCP to grab BTM data.*/
- msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR*/
- msr.hi = 0x0;
- msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out,*/
- wrmsr(msrnum, msr); /* exchange it to anything else to prevent this*/
-
- /* ;Turn off debug clock*/
- msrnum = 0x04C000016; /* DBG_CLK_CTL*/
- msr.lo = 0x00; /* No clock*/
- msr.hi = 0x00;
- wrmsr(msrnum, msr);
-
- /* ;Set debug clock to CPU*/
- msrnum = 0x04C000016; /* DBG_CLK_CTL*/
- msr.lo = 0x01; /* CPU CLOCK*/
- msr.hi = 0x00;
- wrmsr(msrnum, msr);
-
- /* ;Set fifo ctl to BTM bits wide*/
- msrnum = 0x04C00005E; /* FIFO_CTL*/
- msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit,
- * 01= 32 bit, 00 = 16bit),
- * Bit [23:21] are position (100 = CPU downto0)*/
- wrmsr(msrnum, msr); /* */
- /* Bit [19] sets it up in slow data mode.*/
-
- /* ;enable fifo loading - BTM sizing will constrain*/
- /* ; only valid BTM packets to load - this action should always be on*/
- msrnum = 0x04C00006F; /* GLCP ACTION7 - load fifo*/
- msr.lo = 0x00000F000; /* Any nibble all 1's will always trigger*/
- msr.hi = 0x000000000; /* */
- wrmsr(msrnum, msr);
-
- /* ;start storing diag data in the fifo*/
- msrnum = 0x04C00005F; /* DIAG CTL*/
- msr.lo = 0x080000000; /* enable actions*/
- msr.hi = 0x000000000;
- wrmsr(msrnum, msr);
-
- /* Set up delay on data lines, so that the hold time*/
- /* is 1 ns.*/
- msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS*/
- msr.lo = 0x082b5ad68;
- msr.hi = 0x080ad6b57; /* RGB delay = 0x07*/
- wrmsr(msrnum, msr);
-
- /* Set up DF to output diag information on DF pins.*/
- msrnum = DF_GLD_MSR_MASTER_CONF;
- msr.lo = 0x0220;
- msr.hi = 0;
- wrmsr(msrnum, msr);
-
- msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR*/
- msr.hi = 0x0;
- msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out,*/
- wrmsr(msrnum, msr);
- /* end of code for BTM */
-}
-
/* ***************************************************************************/
/* * cpuRegInit*/
/* ***************************************************************************/
void
-cpuRegInit (void)
-{
+cpuRegInit (void){
int msrnum;
msr_t msr;
/* Turn on BTM for early debug based on setup. */
/*if (getnvram( TOKEN_BTM_DIAG_MODE) & 3) {*/
{
- BTM_enable();
+ /* Set Diagnostic Mode */
+ msrnum = CPU_GLD_MSR_DIAG;
+ msr.hi = 0;
+ msr.lo = DIAG_SEL1_SET | DIAG_SET0_SET;
+ wrmsr(msrnum, msr);
+
+ /* Set up GLCP to grab BTM data.*/
+ msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR*/
+ msr.hi = 0x0;
+ msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out,*/
+ wrmsr(msrnum, msr); /* exchange it to anything else to prevent this*/
+
+ /* ;Turn off debug clock*/
+ msrnum = 0x04C000016; /* DBG_CLK_CTL*/
+ msr.lo = 0x00; /* No clock*/
+ msr.hi = 0x00;
+ wrmsr(msrnum, msr);
+
+ /* ;Set debug clock to CPU*/
+ msrnum = 0x04C000016; /* DBG_CLK_CTL*/
+ msr.lo = 0x01; /* CPU CLOCK*/
+ msr.hi = 0x00;
+ wrmsr(msrnum, msr);
+
+ /* ;Set fifo ctl to BTM bits wide*/
+ msrnum = 0x04C00005E; /* FIFO_CTL*/
+ msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit, 01= 32 bit, 00 = 16bit)*/
+ wrmsr(msrnum, msr); /* Bit [23:21] are position (100 = CPU downto0)*/
+ /* Bit [19] sets it up in slow data mode.*/
+
+ /* ;enable fifo loading - BTM sizing will constrain*/
+ /* ; only valid BTM packets to load - this action should always be on*/
+
+ msrnum = 0x04C00006F; /* GLCP ACTION7 - load fifo*/
+ msr.lo = 0x00000F000; /* Any nibble all 1's will always trigger*/
+ msr.hi = 0x000000000; /* */
+ wrmsr(msrnum, msr);
+
+ /* ;start storing diag data in the fifo*/
+ msrnum = 0x04C00005F; /* DIAG CTL*/
+ msr.lo = 0x080000000; /* enable actions*/
+ msr.hi = 0x000000000;
+ wrmsr(msrnum, msr);
+
+ /* Set up delay on data lines, so that the hold time*/
+ /* is 1 ns.*/
+ msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS*/
+ msr.lo = 0x082b5ad68;
+ msr.hi = 0x080ad6b57; /* RGB delay = 0x07*/
+ wrmsr(msrnum, msr);
+
+ /* Set up DF to output diag information on DF pins.*/
+ msrnum = DF_GLD_MSR_MASTER_CONF;
+ msr.lo = 0x0220;
+ msr.hi = 0;
+ wrmsr(msrnum, msr);
+
+ msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR*/
+ msr.hi = 0x0;
+ msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out,*/
+ wrmsr(msrnum, msr);
+ /* end of code for BTM */
}
/* Enable Suspend on Halt*/
@@ -172,32 +164,49 @@ cpuRegInit (void)
msr.lo = 0x00000603C;
wrmsr(msrnum, msr);
- /* Enable CIS mode C */
+
+/* Only do this if we are building for 5535*/
+/* */
+/* FooGlue Setup*/
+/* */
+#if 1
+ /* Enable CIS mode B in FooGlue*/
msrnum = MSR_FG + 0x10;
msr = rdmsr(msrnum);
msr.lo &= ~3;
- msr.lo |= 2;
+ msr.lo |= 2; /* ModeB*/
wrmsr(msrnum, msr);
+#endif
- /* Disable DOT PLL. Graphics init will enable it if needed.*/
+/* */
+/* Disable DOT PLL. Graphics init will enable it if needed.*/
+/* */
msrnum = GLCP_DOTPLL;
msr = rdmsr(msrnum);
msr.lo |= DOTPPL_LOWER_PD_SET;
wrmsr(msrnum, msr);
- /* Enable RSDC and other SMM instructions */
+/* */
+/* Enable RSDC*/
+/* */
msrnum = 0x1301 ;
msr = rdmsr(msrnum);
msr.lo |= 0x08;
wrmsr(msrnum, msr);
- /* BIST*/
+
+/* */
+/* BIST*/
+/* */
/*if (getnvram( TOKEN_BIST_ENABLE) & == TVALUE_DISABLE) {*/
{
- //BIST();
+// BIST();
}
- /* Enable BTB*/
+
+/* */
+/* Enable BTB*/
+/* */
/* I hate to put this check here but it doesn't really work in cpubug.asm*/
msrnum = MSR_GLCP+0x17;
msr = rdmsr(msrnum);
@@ -208,7 +217,9 @@ cpuRegInit (void)
wrmsr(msrnum, msr);
}
- /* FPU impercise exceptions bit*/
+/* */
+/* FPU impercise exceptions bit*/
+/* */
/*if (getnvram( TOKEN_FPU_IE_ENABLE) != TVALUE_DISABLE) {*/
{
msrnum = CPU_FPU_MSR_MODE;
@@ -217,7 +228,9 @@ cpuRegInit (void)
wrmsr(msrnum, msr);
}
- /* Cache Overides*/
+/* */
+/* Cache Overides*/
+/* */
/* Allow NVRam to override DM Setup*/
/*if (getnvram( TOKEN_CACHE_DM_MODE) != 1) {*/
{
@@ -237,6 +250,9 @@ cpuRegInit (void)
}
}
+
+
+
/* ***************************************************************************/
/* **/
/* * MTestPinCheckBX*/
@@ -246,8 +262,7 @@ cpuRegInit (void)
/* **/
/* ***************************************************************************/
static void
-MTestPinCheckBX (void)
-{
+MTestPinCheckBX (void){
int msrnum;
msr_t msr;
diff --git a/src/cpu/amd/model_gx2/model_gx2_init.c b/src/cpu/amd/model_gx2/model_gx2_init.c
index d534f530c7..c6ad683ff8 100644
--- a/src/cpu/amd/model_gx2/model_gx2_init.c
+++ b/src/cpu/amd/model_gx2/model_gx2_init.c
@@ -12,7 +12,6 @@ static void vsm_end_post_smi(void)
__asm__ volatile (
"push %ax\n"
"mov $0x5000, %ax\n"
- /* smint */
".byte 0x0f, 0x38\n"
"pop %ax\n"
);
@@ -25,7 +24,9 @@ static void model_gx2_init(device_t dev)
/* Turn on caching if we haven't already */
x86_enable_cache();
- /* send SYS_END_OF_POST to VSM */
+ /* Enable the local cpu apics */
+ //setup_lapic();
+
vsm_end_post_smi();
printk_debug("model_gx2_init DONE\n");
diff --git a/src/cpu/amd/model_gx2/syspreinit.c b/src/cpu/amd/model_gx2/syspreinit.c
index d411510866..e3ad95235d 100644
--- a/src/cpu/amd/model_gx2/syspreinit.c
+++ b/src/cpu/amd/model_gx2/syspreinit.c
@@ -1,13 +1,20 @@
+/* ***************************************************************************/
+/* **/
+/* * StartTimer1*/
+/* **/
+/* * Entry: none*/
+/* * Exit: Starts Timer 1 for port 61 use*/
+/* * Destroys: Al,*/
+/* **/
+/* ***************************************************************************/
void
-StartTimer1(void)
-{
+StartTimer1(void){
outb(0x56, 0x43);
outb(0x12, 0x41);
}
void
-SystemPreInit(void)
-{
+SystemPreInit(void){
/* they want a jump ... */
__asm__("jmp .+2\ninvd\njmp.+2\n");
diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h
index cc9fb3ce50..0c636ef2b5 100644
--- a/src/include/cpu/amd/gx2def.h
+++ b/src/include/cpu/amd/gx2def.h
@@ -469,18 +469,18 @@
/* This is chip specific!*/
#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM*/
#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM*/
-#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC*/
-#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R*/
+#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC*/
+#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R*/
#define MSR_GLIU0_SMM (MSR_GLIU0 + 0x26) /* BMO*/
#define MSR_GLIU0_DMM (MSR_GLIU0 + 0x27) /* BMO*/
#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM*/
#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM*/
-#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC*/
-#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R*/
+#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC*/
+#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R*/
#define MSR_GLIU1_SMM (MSR_GLIU1 + 0x23) /* BM*/
#define MSR_GLIU1_DMM (MSR_GLIU1 + 0x24) /* BM*/
-#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU*/
+#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU*/
/* definitions that are "once you are mostly up, start VSA" type things */
#define SMM_OFFSET 0x40400000
diff --git a/src/mainboard/amd/rumba/auto.c b/src/mainboard/amd/rumba/auto.c
index fbc272ffd0..b3a9b839ee 100644
--- a/src/mainboard/amd/rumba/auto.c
+++ b/src/mainboard/amd/rumba/auto.c
@@ -102,6 +102,22 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
#include "northbridge/amd/gx2/pll_reset.c"
#include "cpu/amd/model_gx2/cpureginit.c"
#include "cpu/amd/model_gx2/syspreinit.c"
+static void msr_init(void)
+{
+ /* total physical memory */
+ __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
+
+ /* traditional memory 0kB-512kB, 512kB-1MB */
+ __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
+ __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
+
+ __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
+ __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
+
+ /* put code in northbridge[init].c here */
+}
+
+
static void main(unsigned long bist)
{
static const struct mem_controller memctrl [] = {
@@ -109,6 +125,8 @@ static void main(unsigned long bist)
};
SystemPreInit();
+
+
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
@@ -122,6 +140,8 @@ static void main(unsigned long bist)
sdram_initialize(1, memctrl);
+ msr_init();
+
/* Check all of memory */
//ram_check(0x00000000, 640*1024);
}
diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb
index 8c5d98388a..a7962f51d0 100644
--- a/src/mainboard/olpc/rev_a/Config.lb
+++ b/src/mainboard/olpc/rev_a/Config.lb
@@ -133,7 +133,6 @@ chip northbridge/amd/gx2
device pci 1.0 on end
device pci 1.1 on end
chip southbridge/amd/cs5536
- register "enable_gpio0_inta" = "1"
device pci d.0 on end # Realtek 8139 LAN
device pci f.0 on end # ISA Bridge
device pci f.2 on end # IDE Controller
diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c
index 3e5c4daf8f..1dd4c9c7a3 100644
--- a/src/northbridge/amd/gx2/northbridge.c
+++ b/src/northbridge/amd/gx2/northbridge.c
@@ -19,6 +19,8 @@
* FIXME -- make this configurable
*/
#define RAMADJUSTMB 9
+/*
+*/
/* todo: add a resource record. We don't do this here because this may be called when
* very little of the platform is actually working.
@@ -50,15 +52,194 @@ sizeram(void)
return sizem;
}
+
+/* here is programming for the various MSRs.*/
+#define IM_QWAIT 0x100000
+
+#define DMCF_WRITE_SERIALIZE_REQUEST (2<<12) /* 2 outstanding */ /* in high */
+#define DMCF_SERIAL_LOAD_MISSES (2) /* enabled */
+
+/* these are the 8-bit attributes for controlling RCONF registers */
+#define CACHE_DISABLE (1<<0)
+#define WRITE_ALLOCATE (1<<1)
+#define WRITE_PROTECT (1<<2)
+#define WRITE_THROUGH (1<<3)
+#define WRITE_COMBINE (1<<4)
+#define WRITE_SERIALIZE (1<<5)
+
+/* ram has none of this stuff */
+#define RAM_PROPERTIES (0)
+#define DEVICE_PROPERTIES (WRITE_SERIALIZE|CACHE_DISABLE)
+#define ROM_PROPERTIES (WRITE_SERIALIZE|WRITE_THROUGH|CACHE_DISABLE)
+#define MSR_WS_CD_DEFAULT (0x21212121)
+
+/* 1810-1817 give you 8 registers with which to program protection regions */
+/* the are region configuration range registers, or RRCF */
+/* in msr terms, the are a straight base, top address assign, since they are 4k aligned. */
+/* so no left-shift needed for top or base */
+#define RRCF_LOW(base,properties) (base|(1<<8)|properties)
+#define RRCF_LOW_CD(base) RRCF_LOW(base, CACHE_DISABLE)
+
+/* build initializer for P2D MSR */
+#define P2D_BM(msr, pdid1, bizarro, pbase, pmask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(pbase>>24), .lo=(pbase<<8)|pmask}}
+#define P2D_BMO(msr, pdid1, bizarro, poffset, pbase, pmask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(poffset<<8)|(pbase>>24), .lo=(pbase<<8)|pmask}}
+#define P2D_R(msr, pdid1, bizarro, pmax, pmin) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(pmax>>12), .lo=(pmax<<20)|pmin}}
+#define P2D_RO(msr, pdid1, bizarro, poffset, pmax, pmin) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(poffset<<8)|(pmax>>12), .lo=(pmax<<20)|pmin}}
+#define P2D_SC(msr, pdid1, bizarro, wen, ren,pscbase) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(wen), .lo=(ren<<16)|(pscbase>>18)}}
+#define IOD_BM(msr, pdid1, bizarro, ibase, imask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(ibase>>12), .lo=(ibase<<20)|imask}}
+#define IOD_SC(msr, pdid1, bizarro, en, wen, ren, ibase) {msr, {.hi=(pdid1<<29)|(bizarro<<28), .lo=(en<<24)|(wen<<21)|(ren<<20)|(ibase<<3)}}
+
+
+
+struct msr_defaults {
+ int msr_no;
+ msr_t msr;
+} msr_defaults [] = {
+ {0x1700, {.hi = 0, .lo = IM_QWAIT}},
+ {0x1800, {.hi = DMCF_WRITE_SERIALIZE_REQUEST, .lo = DMCF_SERIAL_LOAD_MISSES}},
+ /* 1808 will be done down below, so we have to do 180a->1817 (well, 1813 really) */
+ /* for 180a, for now, we assume VSM will configure it */
+ /* 180b is left at reset value,a0000-bffff is non-cacheable */
+ /* 180c, c0000-dffff is set to write serialize and non-cachable */
+ /* oops, 180c will be set by cpu bug handling in cpubug.c */
+ //{0x180c, {.hi = MSR_WS_CD_DEFAULT, .lo = MSR_WS_CD_DEFAULT}},
+ /* 180d is left at default, e0000-fffff is non-cached */
+
+ /* we will assume 180e, the ssm region configuration, is left at default or set by VSM */
+ /* we will not set 0x180f, the DMM,yet */
+ //{0x1810, {.hi=0xee7ff000, .lo=RRCF_LOW(0xee000000, WRITE_COMBINE|CACHE_DISABLE)}},
+ //{0x1811, {.hi = 0xefffb000, .lo = RRCF_LOW_CD(0xefff8000)}},
+ //{0x1812, {.hi = 0xefff7000, .lo = RRCF_LOW_CD(0xefff4000)}},
+ //{0x1813, {.hi = 0xefff3000, .lo = RRCF_LOW_CD(0xefff0000)}},
+ /* now for GLPCI routing */
+ /* GLIU0 */
+ P2D_BM(0x10000020, 0x1, 0x0, 0x0, 0xfff80),
+ P2D_BM(0x10000021, 0x1, 0x0, 0x80000, 0xfffe0),
+ P2D_SC(0x1000002c, 0x1, 0x0, 0x0, 0xff03, 0x3),
+ /* GLIU1 */
+ P2D_BM(0x40000020, 0x1, 0x0, 0x0, 0xfff80),
+ P2D_BM(0x40000021, 0x1, 0x0, 0x80000, 0xfffe0),
+ P2D_SC(0x4000002d, 0x1, 0x0, 0x0, 0xff03, 0x3),
+ {0}
+};
+
+
static int
setup_gx2_cache(void)
{
+ msr_t msr;
+ unsigned long long val;
+ int sizembytes, sizereg;
+
+ sizembytes = sizeram();
+ printk_debug("enable_cache: enable for %dm bytes\n", sizembytes);
+ /* build up the rconf word. */
+ /* the SYSTOP bits 27:8 are actually the top bits from 31:12. Book fails to say that */
+ /* set romrp */
+ val = ((unsigned long long) ROM_PROPERTIES) << 56;
+ /* make rom base useful for 1M roms */
+ /* Flash base address -- sized for 1/2M for now*/
+ val |= ((unsigned long long) 0xfff800)<<36;
+ /* set the devrp properties */
+ val |= ((unsigned long long) DEVICE_PROPERTIES) << 28;
+ /* sigh. Take our TOM, RIGHT shift 12, since it page-aligned, then LEFT-shift 8 for reg. */
+ /* yank off 8M for frame buffer and 1M for VSA */
+ sizembytes -= RAMADJUSTMB;
+ sizereg = sizembytes;
+ sizereg *= 0x100000;
+ sizereg >>= 12;
+ sizereg <<= 8;
+ val |= sizereg;
+ val |= RAM_PROPERTIES;
+ msr.lo = val;
+ msr.hi = (val >> 32);
+ printk_debug("msr will be set to %x:%x\n", msr.hi, msr.lo);
+ wrmsr(CPU_RCONF_DEFAULT, msr);
+
enable_cache();
+ wbinvd();
+ return sizembytes;
}
+#define SMM_OFFSET 0x40400000
+#define SMM_SIZE 256
+
+/* we have to do this here. We have not found a nicer way to do it */
+void
+setup_gx2(void)
+{
+ int i;
+ unsigned long tmp, tmp2, tmp3;
+ msr_t msr;
+ unsigned long sizem, membytes;
+
+ sizem = setup_gx2_cache();
+
+ membytes = sizem * 1048576;
+#if 0
+ /* we need to set 0x10000028 and 0x40000029 */
+ printk_debug("sizem 0x%x, membytes 0x%x\n", sizem, membytes);
+ msr.hi = 0x20000000 | membytes>>24;
+ msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20);
+ wrmsr(0x10000028, msr);
+ msr.hi = 0x20000000 | membytes>>24;
+ msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20);
+ wrmsr(0x40000029, msr);
+ msr = rdmsr(0x10000028);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo);
+ msr = rdmsr(0x40000029);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo);
+
+
+ /* fixme: SMM MSR 0x10000026 and 0x400000023 */
+ /* calculate the OFFSET field */
+ tmp = membytes - SMM_OFFSET;
+ tmp >>= 12;
+ tmp <<= 8;
+ tmp |= 0x20000000;
+ tmp |= (SMM_OFFSET >> 24);
+
+ /* calculate the PBASE and PMASK fields */
+ tmp2 = (SMM_OFFSET << 8) & 0xFFF00000; /* shift right 12 then left 20 == left 8 */
+ tmp2 |= (((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, tmp, tmp2);
+ msr.hi = tmp;
+ msr.lo = tmp2;
+ wrmsr(0x10000026, msr);
+#else
+ msr.hi = 0x2000000f;
+ msr.lo = 0xfbf00100;
+ wrmsr(0x10000028, msr);
+ msr = rdmsr(0x10000028);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi, msr.lo);
+ wrmsr(0x40000029, msr);
+ msr = rdmsr(0x40000029);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi, msr.lo);
+
+ msr.hi = 0x2cfbc040;
+ msr.lo = 0x400fffc0;
+ wrmsr(0x10000026, msr);
+ msr = rdmsr(0x10000026);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, msr.hi, msr.lo);
+
+ msr.hi = 0x22fffc02;
+ msr.lo = 0x10ffbf00;
+ wrmsr(0x1808, msr);
+ msr = rdmsr(0x1808);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x1808, msr.hi, msr.lo);
+#endif
+ /* now do the default MSR values */
+ for(i = 0; msr_defaults[i].msr_no; i++) {
+ msr_t msr;
+ wrmsr(msr_defaults[i].msr_no, msr_defaults[i].msr);
+ msr = rdmsr(msr_defaults[i].msr_no);
+ printk_debug("MSR 0x%x is now 0x%x:0x%x\n", msr_defaults[i].msr_no, msr.hi,msr.lo);
+ }
+}
static void enable_shadow(device_t dev)
-{
+{
+
}
static void northbridge_init(device_t dev)
@@ -237,7 +418,7 @@ static void enable_dev(struct device *dev)
northbridgeinit();
cpubug();
chipsetinit();
- setup_gx2_cache();
+ setup_gx2();
/* do this here for now -- this chip really breaks our device model */
setup_realmode_idt();
do_vsmbios();
diff --git a/src/northbridge/amd/gx2/northbridgeinit.c b/src/northbridge/amd/gx2/northbridgeinit.c
index 5e4d83a35d..0998a6af96 100644
--- a/src/northbridge/amd/gx2/northbridgeinit.c
+++ b/src/northbridge/amd/gx2/northbridgeinit.c
@@ -22,39 +22,27 @@ struct gliutable {
};
struct gliutable gliu0table[] = {
- /* 0x00000-0x7FFFF to MC */
- {.desc_name = MSR_GLIU0_BASE1, .desc_type = BM, .hi = MSR_MC + 0x0,.lo = 0xFFF80},
- /* 0x80000-0x9ffff to Mc */
- {.desc_name = MSR_GLIU0_BASE2, .desc_type = BM, .hi = MSR_MC + 0x0,.lo = (0x80 << 20) + 0xFFFE0},
- /* 0xc0000-0xfffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */
- {.desc_name = MSR_GLIU0_SHADOW, .desc_type = SC_SHADOW,.hi = MSR_MC + 0x0,.lo= 0x03},
- /* Catch and fix dynamicly.*/
- {.desc_name = MSR_GLIU0_SYSMEM, .desc_type = R_SYSMEM, .hi = MSR_MC, .lo= 0x0},
- /* Catch and fix dynamicly.*/
- {.desc_name = MSR_GLIU0_DMM, .desc_type = BMO_DMM, .hi = MSR_MC,.lo = 0x0},
- /* Catch and fix dynamicly.*/
- {.desc_name = MSR_GLIU0_SMM, .desc_type = BMO_SMM, .hi = MSR_MC,.lo = 0x0},
- {.desc_name = GLIU0_GLD_MSR_COH,.desc_type = OTHER, .hi = 0x0, .lo = GL0_CPU},
- {.desc_name = GL_END, .desc_type = GL_END, .hi = 0x0, .lo = 0x0},
+ {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/
+ {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc*/
+ {.desc_name=MSR_GLIU0_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo*/
+ {.desc_name=MSR_GLIU0_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
+ {.desc_name=MSR_GLIU0_DMM, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
+ {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
+ {.desc_name=GLIU0_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU},
+ {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0},
};
+
struct gliutable gliu1table[] = {
- /* 0x00000-0x7FFFF to GLIU0 */
- {.desc_name = MSR_GLIU1_BASE1, .desc_type = BM, .hi = MSR_GL0 + 0x0,.lo= 0x0FFF80},
- /* 0x80000-0x9ffff to GLIU0 */
- {.desc_name = MSR_GLIU1_BASE2, .desc_type = BM, .hi = MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0},
- /* 0xc0000-0xfffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */
- {.desc_name = MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03},
- /* Cat0xc and fix dynamicly.*/
- {.desc_name = MSR_GLIU1_SYSMEM,. desc_type = R_SYSMEM,.hi= MSR_GL0,.lo= 0x0},
- /* Cat0xc and fix dynamicly.*/
- {.desc_name = MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0},
- /* Cat0xc and fix dynamicly.*/
- {.desc_name = MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0},
- {.desc_name = GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0},
- /* FooGlue FPU 0xF0*/
- {.desc_name = MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0},
- {.desc_name = GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0},
+ {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/
+ {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc*/
+ {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03},/* C0000-Fffff split to MC and PCI (sub decode)*/
+ {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Cat0xc and fix dynamicly.*/
+ {.desc_name=MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Cat0xc and fix dynamicly.*/
+ {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Cat0xc and fix dynamicly.*/
+ {.desc_name=GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0},
+ {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0*/
+ {.desc_name=GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0},
};
struct gliutable *gliutables[] = {gliu0table, gliu1table, 0};
@@ -270,15 +258,16 @@ SMMGL1Init(struct gliutable *gl) {
}
static void
-GLIUInit(struct gliutable *gl)
-{
+GLIUInit(struct gliutable *gl){
+
while (gl->desc_type != GL_END){
switch(gl->desc_type){
default:
- printk_err("%s: name %x, type %x, hi %x, lo %x: unsupported type: ",
- __FUNCTION__, gl->desc_name, gl->desc_type, gl->hi, gl->hi);
- printk_err("Must be %x, %x, %x, %x, %x, or %x\n",
- SC_SHADOW,R_SYSMEM,BMO_DMM, BM_DMM, BMO_SMM,BM_SMM);
+ printk_err("%s: name %x, type %x, hi %x, lo %x: unsupported type: ", __FUNCTION__,
+ gl->desc_name, gl->desc_type, gl->hi, gl->hi);
+ printk_err("Must be %x, %x, %x, %x, %x, or %x\n", SC_SHADOW,R_SYSMEM,BMO_DMM,
+ BM_DMM, BMO_SMM,BM_SMM);
+
case SC_SHADOW: /* Check for a Shadow entry*/
ShadowInit(gl);
break;
@@ -287,7 +276,7 @@ GLIUInit(struct gliutable *gl)
SysmemInit(gl);
break;
- case BMO_DMM: /* check for a DMM entry*/
+ case BMO_DMM: /* check for a DMM entry*/
DMMGL0Init(gl);
break;
@@ -555,22 +544,18 @@ northbridgeinit(void)
int i;
printk_debug("Enter %s\n", __FUNCTION__);
-/*
for(i = 0; gliutables[i]; i++)
GLIUInit(gliutables[i]);
GeodeLinkPriority();
- */
/* Now that the descriptor to memory is set up.*/
/* The memory controller needs one read to synch it's lines before it can be used.*/
i = *(int *) 0;
GLPCIInit();
-/*
ClockGatingInit();
- */
__asm__("FINIT\n");
/* CPUBugsFix -- called elsewhere */
printk_debug("Exit %s\n", __FUNCTION__);
diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c
index 210172ef8e..636c60b9d2 100644
--- a/src/northbridge/amd/gx2/raminit.c
+++ b/src/northbridge/amd/gx2/raminit.c
@@ -4,175 +4,6 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
{
}
-/* here is programming for the various MSRs.*/
-#define IM_QWAIT 0x100000
-
-#define DMCF_WRITE_SERIALIZE_REQUEST (2<<12) /* 2 outstanding */ /* in high */
-#define DMCF_SERIAL_LOAD_MISSES (2) /* enabled */
-
-/* these are the 8-bit attributes for controlling RCONF registers */
-#define CACHE_DISABLE (1<<0)
-#define WRITE_ALLOCATE (1<<1)
-#define WRITE_PROTECT (1<<2)
-#define WRITE_THROUGH (1<<3)
-#define WRITE_COMBINE (1<<4)
-#define WRITE_SERIALIZE (1<<5)
-
-/* ram has none of this stuff */
-#define RAM_PROPERTIES (0)
-#define DEVICE_PROPERTIES (WRITE_SERIALIZE|CACHE_DISABLE)
-#define ROM_PROPERTIES (WRITE_SERIALIZE|WRITE_THROUGH|CACHE_DISABLE)
-#define MSR_WS_CD_DEFAULT (0x21212121)
-
-/* 1810-1817 give you 8 registers with which to program protection regions */
-/* the are region configuration range registers, or RRCF */
-/* in msr terms, the are a straight base, top address assign, since they are 4k aligned. */
-/* so no left-shift needed for top or base */
-#define RRCF_LOW(base,properties) (base|(1<<8)|properties)
-#define RRCF_LOW_CD(base) RRCF_LOW(base, CACHE_DISABLE)
-
-/* build initializer for P2D MSR */
-#define P2D_BM(msr, pdid1, bizarro, pbase, pmask) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28)|(pbase>>24), .lo=(pbase<<8)|pmask}
-#define P2D_BMO(msr, pdid1, bizarro, poffset, pbase, pmask) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28)|(poffset<<8)|(pbase>>24), .lo=(pbase<<8)|pmask}
-#define P2D_R(msr, pdid1, bizarro, pmax, pmin) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28)|(pmax>>12), .lo=(pmax<<20)|pmin}
-#define P2D_RO(msr, pdid1, bizarro, poffset, pmax, pmin) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28)|(poffset<<8)|(pmax>>12), .lo=(pmax<<20)|pmin}
-#define P2D_SC(msr, pdid1, bizarro, wen, ren,pscbase) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28)|(wen), .lo=(ren<<16)|(pscbase>>18)}
-#define IOD_BM(msr, pdid1, bizarro, ibase, imask) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28)|(ibase>>12), .lo=(ibase<<20)|imask}
-#define IOD_SC(msr, pdid1, bizarro, en, wen, ren, ibase) \
- {msr, .hi=(pdid1<<29)|(bizarro<<28), .lo=(en<<24)|(wen<<21)|(ren<<20)|(ibase<<3)}
-
-struct msr_defaults {
- int msr_no;
- unsigned long hi, lo;
-};
-
-
-const struct msr_defaults msr_defaults [] = {
- {0x1700, .hi = 0, .lo = IM_QWAIT},
- {0x1800, .hi = DMCF_WRITE_SERIALIZE_REQUEST, .lo = DMCF_SERIAL_LOAD_MISSES},
- /* 1808 will be done down below, so we have to do 180a->1817 (well, 1813 really) */
- /* for 180a, for now, we assume VSM will configure it */
- /* 180b is left at reset value,a0000-bffff is non-cacheable */
- /* 180c, c0000-dffff is set to write serialize and non-cachable */
- /* oops, 180c will be set by cpu bug handling in cpubug.c */
- //{0x180c, .hi = MSR_WS_CD_DEFAULT, .lo = MSR_WS_CD_DEFAULT},
- /* 180d is left at default, e0000-fffff is non-cached */
-
- /* we will assume 180e, the ssm region configuration, is left at default or set by VSM */
- /* we will not set 0x180f, the DMM,yet */
- //{0x1810, .hi=0xee7ff000, .lo=RRCF_LOW(0xee000000, WRITE_COMBINE|CACHE_DISABLE)},
- //{0x1811, .hi = 0xefffb000, .lo = RRCF_LOW_CD(0xefff8000)},
- //{0x1812, .hi = 0xefff7000, .lo = RRCF_LOW_CD(0xefff4000)},
- //{0x1813, .hi = 0xefff3000, .lo = RRCF_LOW_CD(0xefff0000)},
-
- /* GeodeLink Routing */
- /* GLIU0 */
- /* Traditional Memory 0kB-512kB goes to GLIU port 1, Memory Controller */
- P2D_BM(0x10000020, 0x1, 0x0, 0x00000, 0xfff80),
- /* Traditional Memory 512kB-1MB goes to GLIU port 1, Memory Controller */
- P2D_BM(0x10000021, 0x1, 0x0, 0x80000, 0xfffe0),
- /* Extended Memory, 0xC0000-0x100000, disable write,
- * enable read 0xC0000 - 0xC8000, 0xE0000-0xFFFFF ,
- * goest to GLIU Port 1, Memory Controller */
- P2D_SC(0x1000002c, 0x1, 0x0, 0x0000, 0xff03, 0x3),
- /* GLIU1 */
- /* Traditional Memory 0kB-512kB goes to GLIU port 1, link to GLIU0 */
- P2D_BM(0x40000020, 0x1, 0x0, 0x00000, 0xfff80),
- /* Traditional Memory 512kB-1MB goes to GLIU port 1, link to GLIU0 */
- P2D_BM(0x40000021, 0x1, 0x0, 0x80000, 0xfffe0),
- /* Extended Memory, 0xC0000-0x100000, disable write,
- * enable read 0xC0000 - 0xC8000, 0xE0000-0xFFFFF ,
- * goest to GLIU Port 1, Memory Controller */
- P2D_SC(0x4000002d, 0x1, 0x0, 0x0000, 0xff03, 0x3),
- /* end of table */
- {0}
-};
-
-#define SMM_OFFSET 0x40400000
-#define SMM_SIZE 256
-
-
-void
-setup_gx2(void)
-{
- int i;
- unsigned long tmp, tmp2, tmp3;
- msr_t msr;
- unsigned long sizem, membytes;
-#if 0
- sizem = setup_gx2_cache();
-
- membytes = sizem * 1048576;
-
- /* we need to set 0x10000028 and 0x40000029 */
- //print_debug("sizem 0x%x, membytes 0x%x\n", sizem, membytes);
- msr.hi = 0x20000000 | membytes>>24;
- msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20);
- wrmsr(0x10000028, msr);
- msr.hi = 0x20000000 | membytes>>24;
- msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20);
- wrmsr(0x40000029, msr);
- msr = rdmsr(0x10000028);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo);
- msr = rdmsr(0x40000029);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo);
-
- /* fixme: SMM MSR 0x10000026 and 0x400000023 */
- /* calculate the OFFSET field */
- tmp = membytes - SMM_OFFSET;
- tmp >>= 12;
- tmp <<= 8;
- tmp |= 0x20000000;
- tmp |= (SMM_OFFSET >> 24);
-
- /* calculate the PBASE and PMASK fields */
- tmp2 = (SMM_OFFSET << 8) & 0xFFF00000; /* shift right 12 then left 20 == left 8 */
- tmp2 |= (((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, tmp, tmp2);
- msr.hi = tmp;
- msr.lo = tmp2;
- wrmsr(0x10000026, msr);
-#else
- msr.hi = 0x2000000f;
- msr.lo = 0xfbf00100;
- wrmsr(0x10000028, msr);
- msr = rdmsr(0x10000028);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi, msr.lo);
- wrmsr(0x40000029, msr);
- msr = rdmsr(0x40000029);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi, msr.lo);
-
- msr.hi = 0x2cfbc040;
- msr.lo = 0x400fffc0;
- wrmsr(0x10000026, msr);
- msr = rdmsr(0x10000026);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, msr.hi, msr.lo);
-
- msr.hi = 0x22fffc02;
- msr.lo = 0x10ffbf00;
- wrmsr(0x1808, msr);
- msr = rdmsr(0x1808);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x1808, msr.hi, msr.lo);
-#endif
- /* now do the default MSR values */
-
- wrmsr(msr_defaults[0].msr_no, msr);
- for(i = 0; msr_defaults[i].msr_no; i++) {
- //msr_t msr;
- msr.lo = msr_defaults[i].lo;
- msr.hi = msr_defaults[i].hi;
- wrmsr(msr_defaults[i].msr_no, msr);
- //msr = rdmsr(msr_defaults[i].msr_no);
- //print_debug("MSR 0x%x is now 0x%x:0x%x\n", msr_defaults[i].msr_no, msr.hi,msr.lo);
- }
-}
-
/* Section 6.1.3, LX processor databooks, BIOS Initialization Sequence
* Section 4.1.4, GX/CS5535 GeodeROM Porting guide */
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
@@ -264,5 +95,5 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
wrmsr(0x4c00000f, msr);
/* DRAM working now?? */
- setup_gx2();
+
}
diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c
index ebe99cf395..37c54d5c50 100644
--- a/src/southbridge/amd/cs5536/cs5536.c
+++ b/src/southbridge/amd/cs5536/cs5536.c
@@ -29,13 +29,11 @@ static void southbridge_enable(struct device *dev)
msr.lo = sb->lpc_serirq_enable;
msr.hi = 0;
wrmsr(MDD_LPC_SIRQ, msr);
- printk_debug("Enabled LPC SERIRQ 0x%x\n", msr.lo);
}
if (sb->lpc_irq) {
msr.lo = sb->lpc_irq;
msr.hi = 0;
wrmsr(MDD_IRQM_LPC, msr);
- printk_debug("Enabled lpc irq values 0x%x\n", msr.lo);
}
if (sb->enable_gpio0_inta){
@@ -49,7 +47,6 @@ static void southbridge_enable(struct device *dev)
/* magic stuff */
outl(0x3081, GPIOL_INPUT_INVERT_ENABLE);
outl(GPIOL_0_SET, GPIO_MAPPER_X);
- printk_debug("Enabled GPIO0 INTa\n");
}
diff --git a/src/southbridge/amd/cs5536/cs5536_early_setup.c b/src/southbridge/amd/cs5536/cs5536_early_setup.c
index d66802076d..eb8f9f5140 100644
--- a/src/southbridge/amd/cs5536/cs5536_early_setup.c
+++ b/src/southbridge/amd/cs5536/cs5536_early_setup.c
@@ -165,7 +165,7 @@ static int cs5536_setup_onchipuart(void)
* MSR 0x51400014 bit 18:16
* 3. Enable UART controller
* MSR 0x5140003A bit 0, 1
- * 4. IRQ routing on IRQ Mapper (before loading OS)
+ * 4. IRQ routing on IRQ Mapper
* MSR 0x51400021 bit [27:24]
*/
msr_t msr;
diff --git a/targets/amd/rumba/Config.nofallback.lb b/targets/amd/rumba/Config.nofallback.lb
index 8d6ba90ef1..890981ce62 100644
--- a/targets/amd/rumba/Config.nofallback.lb
+++ b/targets/amd/rumba/Config.nofallback.lb
@@ -34,3 +34,4 @@ end
#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
buildrom ./linuxbios.rom ROM_SIZE "fallback"
+