summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@openbios.org>2003-10-07 14:56:48 +0000
committerStefan Reinauer <stepan@openbios.org>2003-10-07 14:56:48 +0000
commit080038bfbd8fdf08bac12476a3789495e6f705ca (patch)
tree4b1ad44a83b5efaf878f51404daac427330fc309
parent198f0ddded83565034cad90040c8eaeba46823bd (diff)
remove SMBUS_MEM_DEVICE_[START|END] traces from code.
add 8mbit example config for amd solo. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/config/Options.lb20
-rw-r--r--src/sdram/generic_dump_spd.c68
-rw-r--r--targets/amd/solo/.cvsignore2
-rw-r--r--targets/amd/solo/Config-8MBit.lb102
4 files changed, 171 insertions, 21 deletions
diff --git a/src/config/Options.lb b/src/config/Options.lb
index cfc8670d69..98d9e8a3bd 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -515,26 +515,6 @@ define IDE_OFFSET
end
###############################################
-# SMBUS options
-###############################################
-
-define SMBUS_MEM_DEVICE_START
- default (0xa << 3)
- export always
- comment "Start address of SMBUS device"
-end
-define SMBUS_MEM_DEVICE_END
- default {SMBUS_MEM_DEVICE_START +1}
- export always
- comment "End address of SMBUS device"
-end
-define SMBUS_MEM_DEVICE_INC
- default 1
- export always
- comment "Increment value SMBUS"
-end
-
-###############################################
# Misc options
###############################################
diff --git a/src/sdram/generic_dump_spd.c b/src/sdram/generic_dump_spd.c
index 27f1844d3c..2a71353b60 100644
--- a/src/sdram/generic_dump_spd.c
+++ b/src/sdram/generic_dump_spd.c
@@ -1,3 +1,70 @@
+/*
+ * This code is derived from the Opteron boards' debug.c.
+ * It should go away either there or here, depending what fits better.
+ */
+
+static void dump_spd_registers(const struct mem_controller *ctrl)
+{
+ int i;
+ print_debug("\r\n");
+ for(i = 0; i < 4; i++) {
+ unsigned device;
+ device = ctrl->channel0[i];
+ if (device) {
+ int j;
+ print_debug("dimm: ");
+ print_debug_hex8(i);
+ print_debug(".0: ");
+ print_debug_hex8(device);
+ for(j = 0; j < 256; j++) {
+ int status;
+ unsigned char byte;
+ if ((j & 0xf) == 0) {
+ print_debug("\r\n");
+ print_debug_hex8(j);
+ print_debug(": ");
+ }
+ status = spd_read_byte(device, j);
+ if (status < 0) {
+ print_debug("bad device\r\n");
+ break;
+ }
+ byte = status & 0xff;
+ print_debug_hex8(byte);
+ print_debug_char(' ');
+ }
+ print_debug("\r\n");
+ }
+ device = ctrl->channel1[i];
+ if (device) {
+ int j;
+ print_debug("dimm: ");
+ print_debug_hex8(i);
+ print_debug(".1: ");
+ print_debug_hex8(device);
+ for(j = 0; j < 256; j++) {
+ int status;
+ unsigned char byte;
+ if ((j & 0xf) == 0) {
+ print_debug("\r\n");
+ print_debug_hex8(j);
+ print_debug(": ");
+ }
+ status = spd_read_byte(device, j);
+ if (status < 0) {
+ print_debug("bad device\r\n");
+ break;
+ }
+ byte = status & 0xff;
+ print_debug_hex8(byte);
+ print_debug_char(' ');
+ }
+ print_debug("\r\n");
+ }
+ }
+}
+
+#if 0
void dump_spd_registers(void)
{
unsigned device;
@@ -23,3 +90,4 @@ void dump_spd_registers(void)
printk_debug("\n");
}
}
+#endif
diff --git a/targets/amd/solo/.cvsignore b/targets/amd/solo/.cvsignore
index ceeec8434f..368c248b75 100644
--- a/targets/amd/solo/.cvsignore
+++ b/targets/amd/solo/.cvsignore
@@ -1 +1 @@
-solo
+solo*
diff --git a/targets/amd/solo/Config-8MBit.lb b/targets/amd/solo/Config-8MBit.lb
new file mode 100644
index 0000000000..f979ee62de
--- /dev/null
+++ b/targets/amd/solo/Config-8MBit.lb
@@ -0,0 +1,102 @@
+# This config file will build an image without normal/fallback mechanism
+# but with a kernel image builtin instead
+#
+# This has not been tested due to a bug in the SST49LF080A
+
+loadoptions
+
+target solo-8mbit
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses k7
+uses k8
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
+uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses MAINBOARD
+uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
+uses CC
+
+option CC="gcc -m32"
+
+option CONFIG_CHIP_CONFIGURE=1
+
+option MAXIMUM_CONSOLE_LOGLEVEL=8
+option DEFAULT_CONSOLE_LOGLEVEL=8
+option CONFIG_CONSOLE_SERIAL8250=1
+
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option k7=1
+option k8=1
+
+option ROM_SIZE=0x100000
+
+
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
+
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+option FALLBACK_SIZE=ROM_SIZE
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+
+romimage "single"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION=".0-8MBit"
+ mainboard amd/solo
+ payload /usr/share/LinuxBIOS/kernelpayload.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "single"
+