summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Hendricks <dhendrix@chromium.org>2013-02-05 14:50:30 -0800
committerRonald G. Minnich <rminnich@gmail.com>2013-02-06 00:41:45 +0100
commit94e230aa9319ca3421867efc080c985f9bcaaef4 (patch)
tree7f14b0f3a3f2923a18fea4853ca39a36859121d1
parent00e480e22d00088d4d6f8bb6b0a6b5c1f840f6a2 (diff)
snow: use bootblock build class for I2C code
This gets rid of a bunch of duplicate I2C code in the bootblock. Change-Id: I51f625a0f738cca4ed2453fbcb78092e4110bc7e Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2289 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
-rw-r--r--src/cpu/samsung/s5p-common/Makefile.inc1
-rw-r--r--src/mainboard/google/snow/bootblock.c402
2 files changed, 2 insertions, 401 deletions
diff --git a/src/cpu/samsung/s5p-common/Makefile.inc b/src/cpu/samsung/s5p-common/Makefile.inc
index 0f4200c770..621576dbac 100644
--- a/src/cpu/samsung/s5p-common/Makefile.inc
+++ b/src/cpu/samsung/s5p-common/Makefile.inc
@@ -1,4 +1,5 @@
bootblock-y += pwm.c
+bootblock-y += s3c24x0_i2c.c
bootblock-y += s5p_gpio.c
bootblock-y += timer.c
diff --git a/src/mainboard/google/snow/bootblock.c b/src/mainboard/google/snow/bootblock.c
index 0507fb2bda..1985662c9a 100644
--- a/src/mainboard/google/snow/bootblock.c
+++ b/src/mainboard/google/snow/bootblock.c
@@ -68,76 +68,7 @@ static void do_serial(void)
uart_init();
}
-#define I2C_WRITE 0
-#define I2C_READ 1
-
-#define I2C_OK 0
-#define I2C_NOK 1
-#define I2C_NACK 2
-#define I2C_NOK_LA 3 /* Lost arbitration */
-#define I2C_NOK_TOUT 4 /* time out */
-
-#define I2CSTAT_BSY 0x20 /* Busy bit */
-#define I2CSTAT_NACK 0x01 /* Nack bit */
-#define I2CCON_ACKGEN 0x80 /* Acknowledge generation */
-#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
-#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
-#define I2C_MODE_MR 0x80 /* Master Receive Mode */
-#define I2C_START_STOP 0x20 /* START / STOP */
-#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
-
-
-/* The timeouts we live by */
-enum {
- I2C_XFER_TIMEOUT_MS = 35, /* xfer to complete */
- I2C_INIT_TIMEOUT_MS = 1000, /* bus free on init */
- I2C_IDLE_TIMEOUT_MS = 100, /* waiting for bus idle */
- I2C_STOP_TIMEOUT_US = 200, /* waiting for stop events */
-};
-
#define I2C0_BASE 0x12c60000
-struct s3c24x0_i2c_bus i2c0 = {
- .node = 0,
- .bus_num = 0,
- .regs = (struct s3c24x0_i2c *)I2C0_BASE,
- .id = PERIPH_ID_I2C0,
-};
-
-static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
-{
- unsigned long freq, pres = 16, div;
-
- freq = clock_get_periph_rate(PERIPH_ID_I2C0);
- /* calculate prescaler and divisor values */
- if ((freq / pres / (16 + 1)) > speed)
- /* set prescaler to 512 */
- pres = 512;
-
- div = 0;
-
- while ((freq / pres / (div + 1)) > speed)
- div++;
-
- /* set prescaler, divisor according to freq, also set ACKGEN, IRQ */
- writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon);
-
- /* init to SLAVE REVEIVE and set slaveaddr */
- writel(0, &i2c->iicstat);
- writel(slaveadd, &i2c->iicadd);
- /* program Master Transmit (and implicit STOP) */
- writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
-}
-
-static void i2c_bus_init(struct s3c24x0_i2c_bus *i2c, unsigned int bus)
-{
-// exynos_pinmux_config(i2c->id, 0);
- gpio_cfg_pin(GPIO_B30, EXYNOS_GPIO_FUNC(0x2));
- gpio_cfg_pin(GPIO_B31, EXYNOS_GPIO_FUNC(0x2));
- gpio_set_pull(GPIO_B30, EXYNOS_GPIO_PULL_NONE);
- gpio_set_pull(GPIO_B31, EXYNOS_GPIO_PULL_NONE);
-
- i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-}
void do_barriers(void);
void do_barriers(void)
@@ -170,338 +101,6 @@ void my_udelay(unsigned int n)
"bne 1b":"=r" (n):"0"(n));
}
-void i2c_init(int speed, int slaveadd)
-{
- struct s3c24x0_i2c_bus *i2c = &i2c0;
- struct exynos5_gpio_part1 *gpio;
- int i;
- uint32_t x;
-
-#if 0
- /* By default i2c channel 0 is the current bus */
- g_current_bus = 0;
-
- i2c = get_bus(g_current_bus);
- if (!i2c)
- return;
-#endif
-
- i2c_bus_init(i2c, 0);
-
- /* wait for some time to give previous transfer a chance to finish */
- i = I2C_INIT_TIMEOUT_MS * 20;
- while ((readl(&i2c->regs->iicstat) & I2CSTAT_BSY) && (i > 0)) {
- my_udelay(50);
- i--;
- }
-
- gpio = (struct exynos5_gpio_part1 *)(EXYNOS5_GPIO_PART1_BASE);
- /* FIXME(dhendrix): cannot use nested macro (compilation failure) */
-// writel((readl(&gpio->b3.con) & ~0x00FF) | 0x0022, &gpio->b3.con);
- x = readl(&gpio->b3.con);
- writel((x & ~0x00FF) | 0x0022, &gpio->b3.con);
-
- i2c_ch_init(i2c->regs, speed, slaveadd);
-}
-
-static int WaitForXfer(struct s3c24x0_i2c *i2c)
-{
- int i;
-
- i = I2C_XFER_TIMEOUT_MS * 20;
- while (!(readl(&i2c->iiccon) & I2CCON_IRPND)) {
- if (i == 0) {
- //debug("%s: i2c xfer timeout\n", __func__);
- return I2C_NOK_TOUT;
- }
- my_udelay(50);
- i--;
- }
-
- return I2C_OK;
-}
-
-static int IsACK(struct s3c24x0_i2c *i2c)
-{
- return !(readl(&i2c->iicstat) & I2CSTAT_NACK);
-}
-
-static void ReadWriteByte(struct s3c24x0_i2c *i2c)
-{
- uint32_t x;
-
- x = readl(&i2c->iiccon);
- writel(x & ~I2CCON_IRPND, &i2c->iiccon);
- /* FIXME(dhendrix): cannot use nested macro (compilation failure) */
-// writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon);
-}
-
-/*
- * Verify the whether I2C ACK was received or not
- *
- * @param i2c pointer to I2C register base
- * @param buf array of data
- * @param len length of data
- * return I2C_OK when transmission done
- * I2C_NACK otherwise
- */
-static int i2c_send_verify(struct s3c24x0_i2c *i2c, unsigned char buf[],
- unsigned char len)
-{
- int i, result = I2C_OK;
-
- if (IsACK(i2c)) {
- for (i = 0; (i < len) && (result == I2C_OK); i++) {
- writel(buf[i], &i2c->iicds);
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
- if (result == I2C_OK && !IsACK(i2c))
- result = I2C_NACK;
- }
- } else {
- result = I2C_NACK;
- }
-
- return result;
-}
-
-/*
- * Send a STOP event and wait for it to have completed
- *
- * @param mode If it is a master transmitter or receiver
- * @return I2C_OK if the line became idle before timeout I2C_NOK_TOUT otherwise
- */
-static int i2c_send_stop(struct s3c24x0_i2c *i2c, int mode)
-{
- int timeout;
-
- /* Setting the STOP event to fire */
- writel(mode | I2C_TXRX_ENA, &i2c->iicstat);
- ReadWriteByte(i2c);
-
- /* Wait for the STOP to send and the bus to go idle */
- for (timeout = I2C_STOP_TIMEOUT_US; timeout > 0; timeout -= 5) {
- if (!(readl(&i2c->iicstat) & I2CSTAT_BSY))
- return I2C_OK;
- my_udelay(5);
- }
-
- return I2C_NOK_TOUT;
-}
-
-/*
- * cmd_type is 0 for write, 1 for read.
- *
- * addr_len can take any value from 0-255, it is only limited
- * by the char, we could make it larger if needed. If it is
- * 0 we skip the address write cycle.
- */
-static int i2c_transfer(struct s3c24x0_i2c *i2c,
- unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[],
- unsigned short data_len)
-{
- int i, result, stop_bit_result;
- uint32_t x;
-
- if (data == 0 || data_len == 0) {
- /* Don't support data transfer of no length or to address 0 */
- //debug("i2c_transfer: bad call\n");
- return I2C_NOK;
- }
-
- /* Check I2C bus idle */
- i = I2C_IDLE_TIMEOUT_MS * 20;
- while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) {
- my_udelay(50);
- i--;
- }
-
- if (readl(&i2c->iicstat) & I2CSTAT_BSY) {
- //debug("%s: bus busy\n", __func__);
- return I2C_NOK_TOUT;
- }
-
- /* FIXME(dhendrix): cannot use nested macro (compilation failure) */
- //writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon);
- x = readl(&i2c->iiccon);
- writel(x | I2CCON_ACKGEN, &i2c->iiccon);
-
- if (addr && addr_len) {
- writel(chip, &i2c->iicds);
- /* send START */
- writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
- &i2c->iicstat);
- if (WaitForXfer(i2c) == I2C_OK)
- result = i2c_send_verify(i2c, addr, addr_len);
- else
- result = I2C_NACK;
- } else
- result = I2C_NACK;
-
- switch (cmd_type) {
- case I2C_WRITE:
- if (result == I2C_OK)
- result = i2c_send_verify(i2c, data, data_len);
- else {
- writel(chip, &i2c->iicds);
- /* send START */
- writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
- &i2c->iicstat);
- if (WaitForXfer(i2c) == I2C_OK)
- result = i2c_send_verify(i2c, data, data_len);
- }
-
- if (result == I2C_OK)
- result = WaitForXfer(i2c);
-
- stop_bit_result = i2c_send_stop(i2c, I2C_MODE_MT);
- break;
-
- case I2C_READ:
- {
- int was_ok = (result == I2C_OK);
-
- writel(chip, &i2c->iicds);
- /* resend START */
- writel(I2C_MODE_MR | I2C_TXRX_ENA |
- I2C_START_STOP, &i2c->iicstat);
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
-
- if (was_ok || IsACK(i2c)) {
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1) {
- /* FIXME(dhendrix): nested macro */
-#if 0
- writel(readl(&i2c->iiccon) &
- ~I2CCON_ACKGEN,
- &i2c->iiccon);
-#endif
- x = readl(&i2c->iiccon) & ~I2CCON_ACKGEN;
- writel(x, &i2c->iiccon);
- }
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
- data[i] = readl(&i2c->iicds);
- i++;
- }
- } else {
- result = I2C_NACK;
- }
-
- stop_bit_result = i2c_send_stop(i2c, I2C_MODE_MR);
- break;
- }
-
- default:
- //debug("i2c_transfer: bad call\n");
- result = stop_bit_result = I2C_NOK;
- break;
- }
-
- /*
- * If the transmission went fine, then only the stop bit was left to
- * fail. Otherwise, the real failure we're interested in came before
- * that, during the actual transmission.
- */
- return (result == I2C_OK) ? stop_bit_result : result;
-}
-
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- struct s3c24x0_i2c_bus *i2c = &i2c0;
- uchar xaddr[4];
- int ret;
-
- if (alen > 4) {
- //debug("I2C read: addr len %d not supported\n", alen);
- return 1;
- }
-
- if (alen > 0) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if (alen > 0)
- chip |= ((addr >> (alen * 8)) &
- CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
- if (!i2c)
- return -1;
- ret = i2c_transfer(i2c->regs, I2C_READ, chip << 1, &xaddr[4 - alen],
- alen, buffer, len);
- if (ret) {
- //debug("I2c read: failed %d\n", ret);
- return 1;
- }
- return 0;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- struct s3c24x0_i2c_bus *i2c;
- uchar xaddr[4];
- int ret;
-
- if (alen > 4) {
- //debug("I2C write: addr len %d not supported\n", alen);
- return 1;
- }
-
- if (alen > 0) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if (alen > 0)
- chip |= ((addr >> (alen * 8)) &
- CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
- //i2c = get_bus(g_current_bus);
- i2c = &i2c0;
- if (!i2c)
- return -1;
- ret = i2c_transfer(i2c->regs, I2C_WRITE, chip << 1, &xaddr[4 - alen],
- alen, buffer, len);
-
- return ret != 0;
-}
-
/*
* Max77686 parameters values
* see max77686.h for parameters details
@@ -1428,6 +1027,7 @@ void bootblock_mainboard_init(void)
{
/* FIXME: we should not need UART in bootblock, this is only
done for testing purposes */
+ i2c_set_early_reg(I2C0_BASE);
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
power_init();
clock_init();