diff options
| author | Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> | 2020-12-30 20:59:53 +0800 |
|---|---|---|
| committer | Karthik Ramasubramanian <kramasub@google.com> | 2021-01-21 05:09:07 +0000 |
| commit | 375d460f5f0d85cec588e6696fdeb644f57514e0 (patch) | |
| tree | d286ecb095e5a9841c2e529545d7f3dfdcd56d31 | |
| parent | 68d19f83c39ff758a78883a4fa98e59ff330eb59 (diff) | |
mb/google/dedede/var/boten: Replace generic driver with sx9324 driver
Replace i2c driver for the SX9324 proximity detector device.
This is first draft settings, will modify it after fine tuning.
BUG=b:175932166
BRANCH=dedede
TEST=run "i2cdump -y -f 15 0x28" to confirm registers as except.
un-approach：
=> register address: 0x01 value: 0x00
approach:
=> register address: 0x01 value: 0x02
Change-Id: I0c8b5948266a07092799c6db556383fa08b924e6
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
| -rw-r--r-- | src/mainboard/google/dedede/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/google/dedede/variants/boten/overridetree.cb | 51 |
2 files changed, 49 insertions, 3 deletions
diff --git a/src/mainboard/google/dedede/Kconfig b/src/mainboard/google/dedede/Kconfig index cb7eba4e63..69280025ee 100644 --- a/src/mainboard/google/dedede/Kconfig +++ b/src/mainboard/google/dedede/Kconfig @@ -7,6 +7,7 @@ config BOARD_GOOGLE_BASEBOARD_DEDEDE select DRIVERS_I2C_GENERIC select DRIVERS_I2C_GPIO_MUX select DRIVERS_I2C_HID + select DRIVERS_I2C_SX9324 select DRIVERS_INTEL_DPTF select DRIVERS_SPI_ACPI select DRIVERS_USB_ACPI diff --git a/src/mainboard/google/dedede/variants/boten/overridetree.cb b/src/mainboard/google/dedede/variants/boten/overridetree.cb index ff7a4d6b3b..6c0fdd62d1 100644 --- a/src/mainboard/google/dedede/variants/boten/overridetree.cb +++ b/src/mainboard/google/dedede/variants/boten/overridetree.cb @@ -209,11 +209,56 @@ chip soc/intel/jasperlake end end # I2C 4 device pci 19.1 on - chip drivers/i2c/generic - register "hid" = ""STH9324"" - register "name" = ""SEMTECH SX9324"" + chip drivers/i2c/sx9324 register "desc" = ""SAR Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E11_IRQ)" + register "uid" = "2" + register "reg_gnrl_ctrl0" = "0x0a" + register "reg_gnrl_ctrl1" = "0x22" + register "reg_afe_ctrl0" = "0x20" + register "reg_afe_ctrl3" = "0x00" + register "reg_afe_ctrl4" = "0x47" + register "reg_afe_ctrl6" = "0x00" + register "reg_afe_ctrl7" = "0x47" + register "reg_afe_ctrl8" = "0x12" + register "reg_afe_ctrl9" = "0x08" + register "reg_afe_ph0" = "0x37" + register "reg_afe_ph1" = "0x10" + register "reg_afe_ph2" = "0x1f" + register "reg_afe_ph3" = "0x3d" + register "reg_prox_ctrl0" = "0x0b" + register "reg_prox_ctrl1" = "0x0b" + register "reg_prox_ctrl2" = "0x20" + register "reg_prox_ctrl3" = "0x20" + register "reg_prox_ctrl4" = "0x0c" + register "reg_prox_ctrl5" = "0x00" + register "reg_prox_ctrl6" = "0x1c" + register "reg_prox_ctrl7" = "0xc0" + register "reg_adv_ctrl0" = "0x00" + register "reg_adv_ctrl1" = "0x00" + register "reg_adv_ctrl2" = "0x00" + register "reg_adv_ctrl3" = "0x00" + register "reg_adv_ctrl4" = "0x00" + register "reg_adv_ctrl5" = "0x05" + register "reg_adv_ctrl6" = "0x00" + register "reg_adv_ctrl7" = "0x00" + register "reg_adv_ctrl8" = "0x00" + register "reg_adv_ctrl9" = "0x00" + register "reg_adv_ctrl10" = "0x00" + register "reg_adv_ctrl11" = "0x00" + register "reg_adv_ctrl12" = "0x00" + register "reg_adv_ctrl13" = "0x00" + register "reg_adv_ctrl14" = "0x80" + register "reg_adv_ctrl15" = "0x0c" + register "reg_adv_ctrl16" = "0x04" + register "reg_adv_ctrl17" = "0x70" + register "reg_adv_ctrl18" = "0x20" + register "reg_adv_ctrl19" = "0x00" + register "reg_adv_ctrl20" = "0x00" + register "reg_irq_msk" = "0x6f" + register "reg_irq_cfg0" = "0x00" + register "reg_irq_cfg1" = "0x80" + register "reg_irq_cfg2" = "0x01" device i2c 28 on end end end # I2C 5 |