diff options
| author | Stefan Reinauer <stepan@coresystems.de> | 2010-03-22 11:42:32 +0000 |
|---|---|---|
| committer | Stefan Reinauer <stepan@openbios.org> | 2010-03-22 11:42:32 +0000 |
| commit | c02b4fc9db3c3c1e263027382697b566127f66bb (patch) | |
| tree | 11bd18488e360e5c1beeb9ccb852ef4489c3689a | |
| parent | 27852aba6787617ca5656995cbc7e8ef0a3ea22c (diff) | |
printk_foo -> printk(BIOS_FOO, ...)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
539 files changed, 3744 insertions, 3759 deletions
diff --git a/src/arch/i386/boot/acpi.c b/src/arch/i386/boot/acpi.c index ee9246993e..9bab92831f 100644 --- a/src/arch/i386/boot/acpi.c +++ b/src/arch/i386/boot/acpi.c @@ -69,7 +69,7 @@ void acpi_add_table(acpi_rsdp_t *rsdp, void *table) } if (i >= entries_num) { - printk_err("ACPI: Error: Could not add ACPI table, too many tables.\n"); + printk(BIOS_ERR, "ACPI: Error: Could not add ACPI table, too many tables.\n"); return; } @@ -101,7 +101,7 @@ void acpi_add_table(acpi_rsdp_t *rsdp, void *table) xsdt->header.length); } - printk_debug("ACPI: added table %d/%d Length now %d\n", + printk(BIOS_DEBUG, "ACPI: added table %d/%d Length now %d\n", i+1, entries_num, rsdt->header.length); } @@ -497,17 +497,17 @@ static acpi_rsdp_t *valid_rsdp(acpi_rsdp_t *rsdp) if (strncmp((char *)rsdp, RSDP_SIG, sizeof(RSDP_SIG) - 1) != 0) return NULL; - printk_debug("Looking on %p for valid checksum\n", rsdp); + printk(BIOS_DEBUG, "Looking on %p for valid checksum\n", rsdp); if (acpi_checksum((void *)rsdp, 20) != 0) return NULL; - printk_debug("Checksum 1 passed\n"); + printk(BIOS_DEBUG, "Checksum 1 passed\n"); if ((rsdp->revision > 1) && (acpi_checksum((void *)rsdp, rsdp->length) != 0)) return NULL; - printk_debug("Checksum 2 passed all OK\n"); + printk(BIOS_DEBUG, "Checksum 2 passed all OK\n"); return rsdp; } @@ -534,7 +534,7 @@ void *acpi_find_wakeup_vector(void) if (!acpi_is_wakeup()) return NULL; - printk_debug("Trying to find the wakeup vector ...\n"); + printk(BIOS_DEBUG, "Trying to find the wakeup vector ...\n"); /* find RSDP */ for (p = (char *) 0xe0000; p < (char *) 0xfffff; p+=16) { @@ -545,11 +545,11 @@ void *acpi_find_wakeup_vector(void) if (rsdp == NULL) return NULL; - printk_debug("RSDP found at %p\n", rsdp); + printk(BIOS_DEBUG, "RSDP found at %p\n", rsdp); rsdt = (acpi_rsdt_t *) rsdp->rsdt_address; end = (char *) rsdt + rsdt->header.length; - printk_debug("RSDT found at %p ends at %p\n", rsdt, end); + printk(BIOS_DEBUG, "RSDT found at %p ends at %p\n", rsdt, end); for (i = 0; ((char *) &rsdt->entry[i]) < end; i++) { fadt = (acpi_fadt_t *) rsdt->entry[i]; @@ -561,17 +561,17 @@ void *acpi_find_wakeup_vector(void) if (fadt == NULL) return NULL; - printk_debug("FADT found at %p\n", fadt); + printk(BIOS_DEBUG, "FADT found at %p\n", fadt); facs = (acpi_facs_t *)fadt->firmware_ctrl; if (facs == NULL) { - printk_debug("No FACS found, wake up from S3 not possible.\n"); + printk(BIOS_DEBUG, "No FACS found, wake up from S3 not possible.\n"); return NULL; } - printk_debug("FACS found at %p\n", facs); + printk(BIOS_DEBUG, "FACS found at %p\n", facs); wake_vec = (void *) facs->firmware_waking_vector; - printk_debug("OS waking vector is %p\n", wake_vec); + printk(BIOS_DEBUG, "OS waking vector is %p\n", wake_vec); return wake_vec; } diff --git a/src/arch/i386/boot/boot.c b/src/arch/i386/boot/boot.c index 8c8980ae99..895065e64a 100644 --- a/src/arch/i386/boot/boot.c +++ b/src/arch/i386/boot/boot.c @@ -84,13 +84,13 @@ void jmp_to_elf_entry(void *entry, unsigned long buffer, unsigned long size) adjusted_boot_notes = (unsigned long)&elf_boot_notes; adjusted_boot_notes += adjust; - printk_spew("entry = 0x%08lx\n", (unsigned long)entry); - printk_spew("lb_start = 0x%08lx\n", lb_start); - printk_spew("lb_size = 0x%08lx\n", lb_size); - printk_spew("adjust = 0x%08lx\n", adjust); - printk_spew("buffer = 0x%08lx\n", buffer); - printk_spew(" elf_boot_notes = 0x%08lx\n", (unsigned long)&elf_boot_notes); - printk_spew("adjusted_boot_notes = 0x%08lx\n", adjusted_boot_notes); + printk(BIOS_SPEW, "entry = 0x%08lx\n", (unsigned long)entry); + printk(BIOS_SPEW, "lb_start = 0x%08lx\n", lb_start); + printk(BIOS_SPEW, "lb_size = 0x%08lx\n", lb_size); + printk(BIOS_SPEW, "adjust = 0x%08lx\n", adjust); + printk(BIOS_SPEW, "buffer = 0x%08lx\n", buffer); + printk(BIOS_SPEW, " elf_boot_notes = 0x%08lx\n", (unsigned long)&elf_boot_notes); + printk(BIOS_SPEW, "adjusted_boot_notes = 0x%08lx\n", adjusted_boot_notes); /* Jump to kernel */ __asm__ __volatile__( diff --git a/src/arch/i386/boot/coreboot_table.c b/src/arch/i386/boot/coreboot_table.c index 6a45e4bac5..8baaab4f60 100644 --- a/src/arch/i386/boot/coreboot_table.c +++ b/src/arch/i386/boot/coreboot_table.c @@ -307,7 +307,7 @@ static unsigned long lb_table_fini(struct lb_header *head, int fixup) head->table_checksum = compute_ip_checksum(first_rec, head->table_bytes); head->header_checksum = 0; head->header_checksum = compute_ip_checksum(head, sizeof(*head)); - printk_debug("Wrote coreboot table at: %p - %p checksum %x\n", + printk(BIOS_DEBUG, "Wrote coreboot table at: %p - %p checksum %x\n", head, rec, head->table_checksum); return (unsigned long)rec; } @@ -428,7 +428,7 @@ static void lb_dump_memory_ranges(struct lb_memory *mem) int i; entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); - printk_debug("coreboot memory table:\n"); + printk(BIOS_DEBUG, "coreboot memory table:\n"); for(i = 0; i < entries; i++) { uint64_t entry_start = unpack_lb64(mem->map[i].start); uint64_t entry_size = unpack_lb64(mem->map[i].size); @@ -445,7 +445,7 @@ static void lb_dump_memory_ranges(struct lb_memory *mem) default: entry_type="UNKNOWN!"; break; } - printk_debug("%2d. %016llx-%016llx: %s\n", + printk(BIOS_DEBUG, "%2d. %016llx-%016llx: %s\n", i, entry_start, entry_start+entry_size-1, entry_type); } @@ -497,19 +497,19 @@ unsigned long write_coreboot_table( struct lb_memory *mem; #if CONFIG_WRITE_HIGH_TABLES == 1 - printk_debug("Writing high table forward entry at 0x%08lx\n", + printk(BIOS_DEBUG, "Writing high table forward entry at 0x%08lx\n", low_table_end); head = lb_table_init(low_table_end); lb_forward(head, (struct lb_header*)rom_table_end); low_table_end = (unsigned long) lb_table_fini(head, 0); - printk_debug("New low_table_end: 0x%08lx\n", low_table_end); - printk_debug("Now going to write high coreboot table at 0x%08lx\n", + printk(BIOS_DEBUG, "New low_table_end: 0x%08lx\n", low_table_end); + printk(BIOS_DEBUG, "Now going to write high coreboot table at 0x%08lx\n", rom_table_end); head = lb_table_init(rom_table_end); rom_table_end = (unsigned long)head; - printk_debug("rom_table_end = 0x%08lx\n", rom_table_end); + printk(BIOS_DEBUG, "rom_table_end = 0x%08lx\n", rom_table_end); #else if(low_table_end > (0x1000 - sizeof(struct lb_header))) { /* after 4K */ /* We need to put lbtable on to [0xf0000,0x100000) */ @@ -521,16 +521,16 @@ unsigned long write_coreboot_table( } #endif - printk_debug("Adjust low_table_end from 0x%08lx to ", low_table_end); + printk(BIOS_DEBUG, "Adjust low_table_end from 0x%08lx to ", low_table_end); low_table_end += 0xfff; // 4K aligned low_table_end &= ~0xfff; - printk_debug("0x%08lx \n", low_table_end); + printk(BIOS_DEBUG, "0x%08lx \n", low_table_end); /* The Linux kernel assumes this region is reserved */ - printk_debug("Adjust rom_table_end from 0x%08lx to ", rom_table_end); + printk(BIOS_DEBUG, "Adjust rom_table_end from 0x%08lx to ", rom_table_end); rom_table_end += 0xffff; // 64K align rom_table_end &= ~0xffff; - printk_debug("0x%08lx \n", rom_table_end); + printk(BIOS_DEBUG, "0x%08lx \n", rom_table_end); #if (CONFIG_HAVE_OPTION_TABLE == 1) { @@ -553,7 +553,7 @@ unsigned long write_coreboot_table( rom_table_start, rom_table_end-rom_table_start); #if CONFIG_WRITE_HIGH_TABLES == 1 - printk_debug("Adding high table area\n"); + printk(BIOS_DEBUG, "Adding high table area\n"); // should this be LB_MEM_ACPI? lb_add_memory_range(mem, LB_MEM_TABLE, high_tables_base, high_tables_size); diff --git a/src/arch/i386/boot/gdt.c b/src/arch/i386/boot/gdt.c index 069d7b3577..b425ade59d 100644 --- a/src/arch/i386/boot/gdt.c +++ b/src/arch/i386/boot/gdt.c @@ -47,7 +47,7 @@ void move_gdt(void) printk(BIOS_ERR, "Error: Could not relocate GDT.\n"); return; } - printk_debug("Moving GDT to %p...", newgdt); + printk(BIOS_DEBUG, "Moving GDT to %p...", newgdt); memcpy((void*)newgdt, &gdt, num_gdt_bytes); } @@ -55,6 +55,6 @@ void move_gdt(void) gdtarg.limit = num_gdt_bytes - 1; __asm__ __volatile__ ("lgdt %0\n\t" : : "m" (gdtarg)); - printk_debug("ok\n"); + printk(BIOS_DEBUG, "ok\n"); } diff --git a/src/arch/i386/boot/multiboot.c b/src/arch/i386/boot/multiboot.c index ba34a2b03c..a47c0b4af4 100644 --- a/src/arch/i386/boot/multiboot.c +++ b/src/arch/i386/boot/multiboot.c @@ -112,7 +112,7 @@ unsigned long write_multiboot_info( mbi->mmap_length = ((u32) mb_mem) - mbi->mmap_addr; mbi->flags |= MB_INFO_MEM_MAP; - printk_info("Multiboot Information structure has been written.\n"); + printk(BIOS_INFO, "Multiboot Information structure has been written.\n"); return (unsigned long)mb_mem; } diff --git a/src/arch/i386/boot/pirq_routing.c b/src/arch/i386/boot/pirq_routing.c index 37097184b6..0c6269da55 100644 --- a/src/arch/i386/boot/pirq_routing.c +++ b/src/arch/i386/boot/pirq_routing.c @@ -14,10 +14,10 @@ static void check_pirq_routing_table(struct irq_routing_table *rt) uint8_t sum=0; int i; - printk_info("Checking Interrupt Routing Table consistency...\n"); + printk(BIOS_INFO, "Checking Interrupt Routing Table consistency...\n"); if (sizeof(struct irq_routing_table) != rt->size) { - printk_warning("Inconsistent Interrupt Routing Table size (0x%x/0x%x).\n", + printk(BIOS_WARNING, "Inconsistent Interrupt Routing Table size (0x%x/0x%x).\n", sizeof(struct irq_routing_table), rt->size ); @@ -27,21 +27,21 @@ static void check_pirq_routing_table(struct irq_routing_table *rt) for (i = 0; i < rt->size; i++) sum += addr[i]; - printk_debug("%s(): Interrupt Routing Table located at %p.\n", + printk(BIOS_DEBUG, "%s(): Interrupt Routing Table located at %p.\n", __func__, addr); sum = rt->checksum - sum; if (sum != rt->checksum) { - printk_warning("Interrupt Routing Table checksum is: 0x%02x but should be: 0x%02x.\n", + printk(BIOS_WARNING, "Interrupt Routing Table checksum is: 0x%02x but should be: 0x%02x.\n", rt->checksum, sum); rt->checksum = sum; } if (rt->signature != PIRQ_SIGNATURE || rt->version != PIRQ_VERSION || rt->size % 16 ) { - printk_warning("Interrupt Routing Table not valid.\n"); + printk(BIOS_WARNING, "Interrupt Routing Table not valid.\n"); return; } @@ -54,11 +54,11 @@ static void check_pirq_routing_table(struct irq_routing_table *rt) * function would have bailed out earlier. */ if (sum) { - printk_warning("Checksum error in Interrupt Routing Table " + printk(BIOS_WARNING, "Checksum error in Interrupt Routing Table " "could not be fixed.\n"); } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); } static int verify_copy_pirq_routing_table(unsigned long addr) @@ -68,14 +68,14 @@ static int verify_copy_pirq_routing_table(unsigned long addr) rt_curr = (uint8_t*)addr; rt_orig = (uint8_t*)&intel_irq_routing_table; - printk_info("Verifing copy of Interrupt Routing Table at 0x%08x... ", addr); + printk(BIOS_INFO, "Verifing copy of Interrupt Routing Table at 0x%08x... ", addr); for (i = 0; i < intel_irq_routing_table.size; i++) { if (*(rt_curr + i) != *(rt_orig + i)) { - printk_info("failed\n"); + printk(BIOS_INFO, "failed\n"); return -1; } } - printk_info("done\n"); + printk(BIOS_INFO, "done\n"); check_pirq_routing_table((struct irq_routing_table *)addr); @@ -90,9 +90,9 @@ unsigned long copy_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Copying Interrupt Routing Table to 0x%08lx... ", addr); + printk(BIOS_INFO, "Copying Interrupt Routing Table to 0x%08lx... ", addr); memcpy((void *)addr, &intel_irq_routing_table, intel_irq_routing_table.size); - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); #if CONFIG_DEBUG verify_copy_pirq_routing_table(addr); #endif @@ -114,7 +114,7 @@ void pirq_routing_irqs(unsigned long addr) /* Set PCI IRQs. */ for (i = 0; i < num_entries; i++) { - printk_debug("PIRQ Entry %d Dev/Fn: %X Slot: %d\n", i, + printk(BIOS_DEBUG, "PIRQ Entry %d Dev/Fn: %X Slot: %d\n", i, pirq_tbl->slots[i].devfn >> 3, pirq_tbl->slots[i].slot); for (j = 0; j < 4; j++) { @@ -123,12 +123,12 @@ void pirq_routing_irqs(unsigned long addr) int bitmap = pirq_tbl->slots[i].irq[j].bitmap; int irq = 0; - printk_debug("INT: %c link: %x bitmap: %x ", + printk(BIOS_DEBUG, "INT: %c link: %x bitmap: %x ", 'A' + j, link, bitmap); if (!bitmap|| !link || link > 4) { - printk_debug("not routed\n"); + printk(BIOS_DEBUG, "not routed\n"); irq_slot[j] = irq; continue; } @@ -154,7 +154,7 @@ void pirq_routing_irqs(unsigned long addr) else irq = pirq[link - 1]; - printk_debug("IRQ: %d\n", irq); + printk(BIOS_DEBUG, "IRQ: %d\n", irq); irq_slot[j] = irq; } @@ -163,10 +163,10 @@ void pirq_routing_irqs(unsigned long addr) pirq_tbl->slots[i].devfn >> 3, irq_slot); } - printk_debug("PIRQ1: %d\n", pirq[0]); - printk_debug("PIRQ2: %d\n", pirq[1]); - printk_debug("PIRQ3: %d\n", pirq[2]); - printk_debug("PIRQ4: %d\n", pirq[3]); + printk(BIOS_DEBUG, "PIRQ1: %d\n", pirq[0]); + printk(BIOS_DEBUG, "PIRQ2: %d\n", pirq[1]); + printk(BIOS_DEBUG, "PIRQ3: %d\n", pirq[2]); + printk(BIOS_DEBUG, "PIRQ4: %d\n", pirq[3]); pirq_assign_irqs(pirq); } diff --git a/src/arch/i386/boot/tables.c b/src/arch/i386/boot/tables.c index 805fe21121..76a7bb21b1 100644 --- a/src/arch/i386/boot/tables.c +++ b/src/arch/i386/boot/tables.c @@ -53,12 +53,12 @@ struct lb_memory *write_tables(void) unsigned long high_table_pointer; if (!high_tables_base) { - printk_err("ERROR: High Tables Base is not set.\n"); + printk(BIOS_ERR, "ERROR: High Tables Base is not set.\n"); // Are there any boards without? // Stepan thinks we should die() here! } - printk_debug("High Tables Base is %llx.\n", high_tables_base); + printk(BIOS_DEBUG, "High Tables Base is %llx.\n", high_tables_base); rom_table_start = 0xf0000; rom_table_end = 0xf0000; @@ -169,7 +169,7 @@ struct lb_memory *write_tables(void) (acpi_rsdt_t *)(high_rsdp->rsdt_address), (acpi_xsdt_t *)((unsigned long)high_rsdp->xsdt_address)); } else { - printk_err("ERROR: Didn't find RSDP in high table.\n"); + printk(BIOS_ERR, "ERROR: Didn't find RSDP in high table.\n"); } rom_table_end = ALIGN(rom_table_end + sizeof(acpi_rsdp_t), 16); } else { @@ -202,7 +202,7 @@ struct lb_memory *write_tables(void) if (new_high_table_pointer > (high_table_pointer + MAX_COREBOOT_TABLE_SIZE)) - printk_err("%s: coreboot table didn't fit (%lx)\n", + printk(BIOS_ERR, "%s: coreboot table didn't fit (%lx)\n", __func__, new_high_table_pointer - high_table_pointer); diff --git a/src/arch/i386/lib/console_printk.c b/src/arch/i386/lib/console_printk.c index e9005796e9..191a4b7fe0 100644 --- a/src/arch/i386/lib/console_printk.c +++ b/src/arch/i386/lib/console_printk.c @@ -1,21 +1,21 @@ -#define printk_emerg(fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) -#define printk_alert(fmt, arg...) do_printk(BIOS_ALERT ,fmt, ##arg) +#define printk(BIOS_EMERG, fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) +#define printk(BIOS_ALERT, fmt, arg...) do_printk(BIOS_ALERT ,fmt, ##arg) #define printk_crit(fmt, arg...) do_printk(BIOS_CRIT ,fmt, ##arg) -#define printk_err(fmt, arg...) do_printk(BIOS_ERR ,fmt, ##arg) -#define printk_warning(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) +#define printk(BIOS_ERR, fmt, arg...) do_printk(BIOS_ERR ,fmt, ##arg) +#define printk(BIOS_WARNING, fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) #define printk_notice(fmt, arg...) do_printk(BIOS_NOTICE ,fmt, ##arg) -#define printk_info(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) -#define printk_debug(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) -#define printk_spew(fmt, arg...) do_printk(BIOS_SPEW ,fmt, ##arg) +#define printk(BIOS_INFO, fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) +#define printk(BIOS_DEBUG, fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) +#define printk(BIOS_SPEW, fmt, arg...) do_printk(BIOS_SPEW ,fmt, ##arg) #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_EMERG #undef printk_emerg -#define printk_emerg(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_EMERG, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_ALERT #undef printk_alert -#define printk_alert(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_ALERT, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_CRIT #undef printk_crit @@ -23,11 +23,11 @@ #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_ERR #undef printk_err -#define printk_err(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_ERR, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_WARNING #undef printk_warning -#define printk_warning(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_WARNING, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_NOTICE #undef printk_notice @@ -35,22 +35,22 @@ #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_INFO #undef printk_info -#define printk_info(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_INFO, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_DEBUG #undef printk_debug -#define printk_debug(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_DEBUG, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #if CONFIG_MAXIMUM_CONSOLE_LOGLEVEL < BIOS_SPEW #undef printk_spew -#define printk_spew(fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) +#define printk(BIOS_SPEW, fmt, arg...) do_printk(BIOS_EMERG , "", ##arg) #endif #define print_emerg(STR) printk_emerg ("%s", (STR)) #define print_alert(STR) printk_alert ("%s", (STR)) #define print_crit(STR) printk_crit ("%s", (STR)) #define print_err(STR) printk_err ("%s", (STR)) -#define print_warning(STR) printk_warning("%s", (STR)) +#define print_warning(STR) printk(BIOS_WARNING, "%s", (STR)) #define print_notice(STR) printk_notice ("%s", (STR)) #define print_info(STR) printk_info ("%s", (STR)) #define print_debug(STR) printk_debug ("%s", (STR)) @@ -60,7 +60,7 @@ #define print_alert_char(CH) printk_alert ("%c", (CH)) #define print_crit_char(CH) printk_crit ("%c", (CH)) #define print_err_char(CH) printk_err ("%c", (CH)) -#define print_warning_char(CH) printk_warning("%c", (CH)) +#define print_warning_char(CH) printk(BIOS_WARNING, "%c", (CH)) #define print_notice_char(CH) printk_notice ("%c", (CH)) #define print_info_char(CH) printk_info ("%c", (CH)) #define print_debug_char(CH) printk_debug ("%c", (CH)) @@ -70,7 +70,7 @@ #define print_alert_hex8(HEX) printk_alert ("%02x", (HEX)) #define print_crit_hex8(HEX) printk_crit ("%02x", (HEX)) #define print_err_hex8(HEX) printk_err ("%02x", (HEX)) -#define print_warning_hex8(HEX) printk_warning("%02x", (HEX)) +#define print_warning_hex8(HEX) printk(BIOS_WARNING, "%02x", (HEX)) #define print_notice_hex8(HEX) printk_notice ("%02x", (HEX)) #define print_info_hex8(HEX) printk_info ("%02x", (HEX)) #define print_debug_hex8(HEX) printk_debug ("%02x", (HEX)) @@ -80,7 +80,7 @@ #define print_alert_hex16(HEX) printk_alert ("%04x", (HEX)) #define print_crit_hex16(HEX) printk_crit ("%04x", (HEX)) #define print_err_hex16(HEX) printk_err ("%04x", (HEX)) -#define print_warning_hex16(HEX) printk_warning("%04x", (HEX)) +#define print_warning_hex16(HEX) printk(BIOS_WARNING, "%04x", (HEX)) #define print_notice_hex16(HEX) printk_notice ("%04x", (HEX)) #define print_info_hex16(HEX) printk_info ("%04x", (HEX)) #define print_debug_hex16(HEX) printk_debug ("%04x", (HEX)) @@ -90,7 +90,7 @@ #define print_alert_hex32(HEX) printk_alert ("%08x", (HEX)) #define print_crit_hex32(HEX) printk_crit ("%08x", (HEX)) #define print_err_hex32(HEX) printk_err ("%08x", (HEX)) -#define print_warning_hex32(HEX) printk_warning("%08x", (HEX)) +#define print_warning_hex32(HEX) printk(BIOS_WARNING, "%08x", (HEX)) #define print_notice_hex32(HEX) printk_notice ("%08x", (HEX)) #define print_info_hex32(HEX) printk_info ("%08x", (HEX)) #define print_debug_hex32(HEX) printk_debug ("%08x", (HEX)) diff --git a/src/arch/i386/lib/cpu.c b/src/arch/i386/lib/cpu.c index 0bcd5a674c..9f72789c7c 100644 --- a/src/arch/i386/lib/cpu.c +++ b/src/arch/i386/lib/cpu.c @@ -224,7 +224,7 @@ void cpu_initialize(void) info = cpu_info(); - printk_info("Initializing CPU #%ld\n", info->index); + printk(BIOS_INFO, "Initializing CPU #%ld\n", info->index); cpu = info->cpu; if (!cpu) { @@ -233,12 +233,12 @@ void cpu_initialize(void) /* Find what type of cpu we are dealing with */ identify_cpu(cpu); - printk_debug("CPU: vendor %s device %x\n", + printk(BIOS_DEBUG, "CPU: vendor %s device %x\n", cpu_vendor_name(cpu->vendor), cpu->device); get_fms(&c, cpu->device); - printk_debug("CPU: family %02x, model %02x, stepping %02x\n", c.x86, c.x86_model, c.x86_mask); + printk(BIOS_DEBUG, "CPU: family %02x, model %02x, stepping %02x\n", c.x86, c.x86_model, c.x86_mask); /* Lookup the cpu's operations */ set_cpu_ops(cpu); @@ -249,7 +249,7 @@ void cpu_initialize(void) set_cpu_ops(cpu); cpu->device += c.x86_mask; if(!cpu->ops) die("Unknown cpu"); - printk_debug("Using generic cpu ops (good)\n"); + printk(BIOS_DEBUG, "Using generic cpu ops (good)\n"); } @@ -260,7 +260,7 @@ void cpu_initialize(void) cpu->ops->init(cpu); } - printk_info("CPU #%ld initialized\n", info->index); + printk(BIOS_INFO, "CPU #%ld initialized\n", info->index); return; } diff --git a/src/arch/i386/lib/exception.c b/src/arch/i386/lib/exception.c index f720ba8567..eb1df20e26 100644 --- a/src/arch/i386/lib/exception.c +++ b/src/arch/i386/lib/exception.c @@ -475,7 +475,7 @@ void x86_exception(struct eregs *info) put_packet(out_buffer); } #else /* !CONFIG_GDB_STUB */ - printk_emerg( + printk(BIOS_EMERG, "Unexpected Exception: %d @ %02x:%08x - Halting\n" "Code: %d eflags: %08x\n" "eax: %08x ebx: %08x ecx: %08x edx: %08x\n" diff --git a/src/arch/i386/lib/pci_ops_auto.c b/src/arch/i386/lib/pci_ops_auto.c index 1dd2494ba9..1f144381ee 100644 --- a/src/arch/i386/lib/pci_ops_auto.c +++ b/src/arch/i386/lib/pci_ops_auto.c @@ -37,7 +37,7 @@ static int pci_sanity_check(const struct pci_bus_operations *o) return 1; } } - printk_err("PCI: Sanity check failed\n"); + printk(BIOS_ERR, "PCI: Sanity check failed\n"); return 0; } @@ -58,7 +58,7 @@ static const struct pci_bus_operations *pci_check_direct(void) pci_sanity_check(&pci_cf8_conf1)) { outl(tmp, 0xCF8); - printk_debug("PCI: Using configuration type 1\n"); + printk(BIOS_DEBUG, "PCI: Using configuration type 1\n"); return &pci_cf8_conf1; } outl(tmp, 0xCF8); @@ -74,7 +74,7 @@ static const struct pci_bus_operations *pci_check_direct(void) if ((inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00) && pci_sanity_check(&pci_cf8_conf2)) { - printk_debug("PCI: Using configuration type 2\n"); + printk(BIOS_DEBUG, "PCI: Using configuration type 2\n"); return &pci_cf8_conf2; } } @@ -94,7 +94,7 @@ const struct pci_bus_operations *pci_remember_direct(void) */ void pci_set_method(device_t dev) { - printk_info("Finding PCI configuration type.\n"); + printk(BIOS_INFO, "Finding PCI configuration type.\n"); dev->ops->ops_pci_bus = pci_remember_direct(); post_code(0x5f); } diff --git a/src/arch/i386/smp/ioapic.c b/src/arch/i386/smp/ioapic.c index 630463e63d..efc2ac52fc 100644 --- a/src/arch/i386/smp/ioapic.c +++ b/src/arch/i386/smp/ioapic.c @@ -40,13 +40,13 @@ void clear_ioapic(u32 ioapic_base) u32 low, high; u32 i, ioapic_interrupts; - printk_debug("IOAPIC: Clearing IOAPIC at 0x%08x\n", ioapic_base); + printk(BIOS_DEBUG, "IOAPIC: Clearing IOAPIC at 0x%08x\n", ioapic_base); /* Read the available number of interrupts */ ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff; if (!ioapic_interrupts || ioapic_interrupts == 0xff) ioapic_interrupts = 24; - printk_debug("IOAPIC: %d interrupts\n", ioapic_interrupts); + printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts); low = DISABLED; high = NONE; @@ -55,11 +55,11 @@ void clear_ioapic(u32 ioapic_base) io_apic_write(ioapic_base, i * 2 + 0x10, low); io_apic_write(ioapic_base, i * 2 + 0x11, high); - printk_spew("IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low); + printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low); } if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) { - printk_warning("IO APIC not responding.\n"); + printk(BIOS_WARNING, "IO APIC not responding.\n"); return; } } @@ -70,12 +70,12 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id) u32 low, high; u32 i, ioapic_interrupts; - printk_debug("IOAPIC: Initializing IOAPIC at 0x%08x\n", ioapic_base); - printk_debug("IOAPIC: Bootstrap Processor Local APIC = %02x\n", + printk(BIOS_DEBUG, "IOAPIC: Initializing IOAPIC at 0x%08x\n", ioapic_base); + printk(BIOS_DEBUG, "IOAPIC: Bootstrap Processor Local APIC = %02x\n", bsp_lapicid); if (ioapic_id) { - printk_debug("IOAPIC: ID = 0x%02x\n", ioapic_id); + printk(BIOS_DEBUG, "IOAPIC: ID = 0x%02x\n", ioapic_id); /* Set IOAPIC ID if it has been specified */ io_apic_write(ioapic_base, 0x00, (io_apic_read(ioapic_base, 0x00) & 0xfff0ffff) | @@ -86,7 +86,7 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id) ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff; if (!ioapic_interrupts || ioapic_interrupts == 0xff) ioapic_interrupts = 24; - printk_debug("IOAPIC: %d interrupts\n", ioapic_interrupts); + printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts); // XXX this decision should probably be made elsewhere, and @@ -101,11 +101,11 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id) /* For the Pentium 4 and above APICs deliver their interrupts * on the front side bus, enable that. */ - printk_debug("IOAPIC: Enabling interrupts on FSB\n"); + printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on FSB\n"); io_apic_write(ioapic_base, 0x03, io_apic_read(ioapic_base, 0x03) | (1 << 0)); #endif #ifdef IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS - printk_debug("IOAPIC: Enabling interrupts on APIC serial bus\n"); + printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on APIC serial bus\n"); io_apic_write(ioapic_base, 0x03, 0); #endif @@ -117,11 +117,11 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id) io_apic_write(ioapic_base, 0x11, high); if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) { - printk_warning("IO APIC not responding.\n"); + printk(BIOS_WARNING, "IO APIC not responding.\n"); return; } - printk_spew("IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0, high, low); + printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0, high, low); low = DISABLED; high = NONE; @@ -130,6 +130,6 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id) io_apic_write(ioapic_base, i * 2 + 0x10, low); io_apic_write(ioapic_base, i * 2 + 0x11, high); - printk_spew("IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low); + printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low); } } diff --git a/src/arch/i386/smp/mpspec.c b/src/arch/i386/smp/mpspec.c index 302f97ae90..1beba873cc 100644 --- a/src/arch/i386/smp/mpspec.c +++ b/src/arch/i386/smp/mpspec.c @@ -177,7 +177,7 @@ void smp_write_intsrc(struct mp_config_table *mc, mpc->mpc_dstirq = dstirq; smp_add_mpc_entry(mc, sizeof(*mpc)); #ifdef DEBUG_MPTABLE - printk_debug("add intsrc srcbus 0x%x srcbusirq 0x%x, dstapic 0x%x, dstirq 0x%x\n", + printk(BIOS_DEBUG, "add intsrc srcbus 0x%x srcbusirq 0x%x, dstapic 0x%x, dstirq 0x%x\n", srcbus, srcbusirq, dstapic, dstirq); hexdump(__func__, mpc, sizeof(*mpc)); #endif @@ -215,7 +215,7 @@ void smp_write_intsrc_pci_bridge(struct mp_config_table *mc, if ((child->class >> 16) != PCI_BASE_CLASS_BRIDGE) { /* pci device */ - printk_debug("route irq: %s\n", dev_path(child)); + printk(BIOS_DEBUG, "route irq: %s\n", dev_path(child)); for (i = 0; i < 4; i++) smp_write_intsrc(mc, irqtype, irqflag, srcbus, (slot<<2)|i, dstapic, dstirq_x[i]); goto next; @@ -225,7 +225,7 @@ void smp_write_intsrc_pci_bridge(struct mp_config_table *mc, case PCI_CLASS_BRIDGE_PCI: case PCI_CLASS_BRIDGE_PCMCIA: case PCI_CLASS_BRIDGE_CARDBUS: - printk_debug("route irq bridge: %s\n", dev_path(child)); + printk(BIOS_DEBUG, "route irq bridge: %s\n", dev_path(child)); smp_write_intsrc_pci_bridge(mc, irqtype, irqflag, child, dstapic, dstirq_x); } diff --git a/src/boot/selfboot.c b/src/boot/selfboot.c index 09219909a9..b945e0b4c6 100644 --- a/src/boot/selfboot.c +++ b/src/boot/selfboot.c @@ -80,10 +80,10 @@ void * cbfs_load_payload(struct lb_memory *lb_mem, const char *name) payload = (struct cbfs_payload *)cbfs_find_file(name, CBFS_TYPE_PAYLOAD); if (payload == NULL) return (void *) -1; - printk_debug("Got a payload\n"); + printk(BIOS_DEBUG, "Got a payload\n"); selfboot(lb_mem, payload); - printk_emerg("SELFBOOT RETURNED!\n"); + printk(BIOS_EMERG, "SELFBOOT RETURNED!\n"); return (void *) -1; } @@ -175,21 +175,21 @@ static int valid_area(struct lb_memory *mem, unsigned long buffer, break; } if ((mtype == LB_MEM_TABLE) && (start < mend) && (end > mstart)) { - printk_err("Payload is overwriting Coreboot tables.\n"); + printk(BIOS_ERR, "Payload is overwriting Coreboot tables.\n"); break; } } if (i == mem_entries) { - printk_err("No matching ram area found for range:\n"); - printk_err(" [0x%016lx, 0x%016lx)\n", start, end); - printk_err("Ram areas\n"); + printk(BIOS_ERR, "No matching ram area found for range:\n"); + printk(BIOS_ERR, " [0x%016lx, 0x%016lx)\n", start, end); + printk(BIOS_ERR, "Ram areas\n"); for(i = 0; i < mem_entries; i++) { uint64_t mstart, mend; uint32_t mtype; mtype = mem->map[i].type; mstart = unpack_lb64(mem->map[i].start); mend = mstart + unpack_lb64(mem->map[i].size); - printk_err(" [0x%016lx, 0x%016lx) %s\n", + printk(BIOS_ERR, " [0x%016lx, 0x%016lx) %s\n", (unsigned long)mstart, (unsigned long)mend, (mtype == LB_MEM_RAM)?"RAM":"Reserved"); @@ -220,7 +220,7 @@ static int relocate_segment(unsigned long buffer, struct segment *seg) * 0 : A new segment is inserted after the seg, or no new one. */ unsigned long start, middle, end, ret = 0; - printk_spew("lb: [0x%016lx, 0x%016lx)\n", + printk(BIOS_SPEW, "lb: [0x%016lx, 0x%016lx)\n", lb_start, lb_end); /* I don't conflict with coreboot so get out of here */ @@ -231,7 +231,7 @@ static int relocate_segment(unsigned long buffer, struct segment *seg) middle = start + seg->s_filesz; end = start + seg->s_memsz; - printk_spew("segment: [0x%016lx, 0x%016lx, 0x%016lx)\n", + printk(BIOS_SPEW, "segment: [0x%016lx, 0x%016lx, 0x%016lx)\n", start, middle, end); if (seg->compression == CBFS_COMPRESS_NONE) { @@ -268,7 +268,7 @@ static int relocate_segment(unsigned long buffer, struct segment *seg) /* compute the new value of start */ start = seg->s_dstaddr; - printk_spew(" early: [0x%016lx, 0x%016lx, 0x%016lx)\n", + printk(BIOS_SPEW, " early: [0x%016lx, 0x%016lx, 0x%016lx)\n", new->s_dstaddr, new->s_dstaddr + new->s_filesz, new->s_dstaddr + new->s_memsz); @@ -305,7 +305,7 @@ static int relocate_segment(unsigned long buffer, struct segment *seg) seg->phdr_next->phdr_prev = new; seg->phdr_next = new; - printk_spew(" late: [0x%016lx, 0x%016lx, 0x%016lx)\n", + printk(BIOS_SPEW, " late: [0x%016lx, 0x%016lx, 0x%016lx)\n", new->s_dstaddr, new->s_dstaddr + new->s_filesz, new->s_dstaddr + new->s_memsz); @@ -319,7 +319,7 @@ static int relocate_segment(unsigned long buffer, struct segment *seg) */ seg->s_dstaddr = buffer + (seg->s_dstaddr - lb_start); - printk_spew(" bounce: [0x%016lx, 0x%016lx, 0x%016lx)\n", + printk(BIOS_SPEW, " bounce: [0x%016lx, 0x%016lx, 0x%016lx)\n", seg->s_dstaddr, seg->s_dstaddr + seg->s_filesz, seg->s_dstaddr + seg->s_memsz); @@ -342,16 +342,16 @@ static int build_self_segment_list( first_segment = segment = &payload->segments; while(1) { - printk_debug("Loading segment from rom address 0x%p\n", segment); + printk(BIOS_DEBUG, "Loading segment from rom address 0x%p\n", segment); switch(segment->type) { case PAYLOAD_SEGMENT_PARAMS: - printk_debug(" parameter section (skipped)\n"); + printk(BIOS_DEBUG, " parameter section (skipped)\n"); segment++; continue; case PAYLOAD_SEGMENT_CODE: case PAYLOAD_SEGMENT_DATA: - printk_debug(" %s (compression=%x)\n", + printk(BIOS_DEBUG, " %s (compression=%x)\n", segment->type == PAYLOAD_SEGMENT_CODE ? "code" : "data", ntohl(segment->compression)); new = malloc(sizeof(*new)); @@ -361,18 +361,18 @@ static int build_self_segment_list( new->s_srcaddr = (u32) ((unsigned char *) first_segment) + ntohl(segment->offset); new->s_filesz = ntohl(segment->len); - printk_debug(" New segment dstaddr 0x%lx memsize 0x%lx srcaddr 0x%lx filesize 0x%lx\n", + printk(BIOS_DEBUG, " New segment dstaddr 0x%lx memsize 0x%lx srcaddr 0x%lx filesize 0x%lx\n", new->s_dstaddr, new->s_memsz, new->s_srcaddr, new->s_filesz); /* Clean up the values */ if (new->s_filesz > new->s_memsz) { new->s_filesz = new->s_memsz; } - printk_debug(" (cleaned up) New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n", + printk(BIOS_DEBUG, " (cleaned up) New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n", new->s_dstaddr, new->s_memsz, new->s_srcaddr, new->s_filesz); break; case PAYLOAD_SEGMENT_BSS: - printk_debug(" BSS 0x%p (%d byte)\n", (void *) ntohl((u32) segment->load_addr), + printk(BIOS_DEBUG, " BSS 0x%p (%d byte)\n", (void *) ntohl((u32) segment->load_addr), ntohl(segment->mem_len)); new = malloc(sizeof(*new)); new->s_filesz = 0; @@ -381,7 +381,7 @@ static int build_self_segment_list( break; case PAYLOAD_SEGMENT_ENTRY: - printk_debug(" Entry Point 0x%p\n", (void *) ntohl((u32) segment->load_addr)); + printk(BIOS_DEBUG, " Entry Point 0x%p\n", (void *) ntohl((u32) segment->load_addr)); *entry = ntohl((u32) segment->load_addr); /* Per definition, a payload always has the entry point * as last segment. Thus, we use the occurence of the @@ -394,7 +394,7 @@ static int build_self_segment_list( /* We found something that we don't know about. Throw * hands into the sky and run away! */ - printk_emerg("Bad segment type %x\n", segment->type); + printk(BIOS_EMERG, "Bad segment type %x\n", segment->type); return -1; } @@ -437,7 +437,7 @@ static int load_self_segments( } get_bounce_buffer(mem, bounce_high - lb_start); if (!bounce_buffer) { - printk_err("Could not find a bounce buffer...\n"); + printk(BIOS_ERR, "Could not find a bounce buffer...\n"); return 0; } for(ptr = head->next; ptr != head; ptr = ptr->next) { @@ -447,7 +447,7 @@ static int load_self_segments( } for(ptr = head->next; ptr != head; ptr = ptr->next) { unsigned char *dest, *src; - printk_debug("Loading Segment: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n", + printk(BIOS_DEBUG, "Loading Segment: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n", ptr->s_dstaddr, ptr->s_memsz, ptr->s_filesz); /* Modify the segment to load onto the bounce_buffer if necessary. @@ -457,7 +457,7 @@ static int load_self_segments( continue; } - printk_debug("Post relocation: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n", + printk(BIOS_DEBUG, "Post relocation: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n", ptr->s_dstaddr, ptr->s_memsz, ptr->s_filesz); /* Compute the boundaries of the segment */ @@ -471,13 +471,13 @@ static int load_self_segments( len = ptr->s_filesz; switch(ptr->compression) { case CBFS_COMPRESS_LZMA: { - printk_debug("using LZMA\n"); + printk(BIOS_DEBUG, "using LZMA\n"); len = ulzma(src, dest); break; } #if CONFIG_COMPRESSED_PAYLOAD_NRV2B==1 case CBFS_COMPRESS_NRV2B: { - printk_debug("using NRV2B\n"); + printk(BIOS_DEBUG, "using NRV2B\n"); unsigned long unrv2b(u8 *src, u8 *dst, unsigned long *ilen_p); unsigned long tmp; len = unrv2b(src, dest, &tmp); @@ -485,17 +485,17 @@ static int load_self_segments( } #endif case CBFS_COMPRESS_NONE: { - printk_debug("it's not compressed!\n"); + printk(BIOS_DEBUG, "it's not compressed!\n"); memcpy(dest, src, len); break; } default: - printk_info( "CBFS: Unknown compression type %d\n", ptr->compression); + printk(BIOS_INFO, "CBFS: Unknown compression type %d\n", ptr->compression); return -1; } end = dest + ptr->s_memsz; middle = dest + len; - printk_spew("[ 0x%016lx, %016lx, 0x%016lx) <- %016lx\n", + printk(BIOS_SPEW, "[ 0x%016lx, %016lx, 0x%016lx) <- %016lx\n", (unsigned long)dest, (unsigned long)middle, (unsigned long)end, @@ -503,27 +503,27 @@ static int load_self_segments( /* Zero the extra bytes between middle & end */ if (middle < end) { - printk_debug("Clearing Segment: addr: 0x%016lx memsz: 0x%016lx\n", + printk(BIOS_DEBUG, "Clearing Segment: addr: 0x%016lx memsz: 0x%016lx\n", (unsigned long)middle, (unsigned long)(end - middle)); /* Zero the extra bytes */ memset(middle, 0, end - middle); } /* Copy the data that's outside the area that shadows coreboot_ram */ - printk_debug("dest %p, end %p, bouncebuffer %lx\n", dest, end, bounce_buffer); + printk(BIOS_DEBUG, "dest %p, end %p, bouncebuffer %lx\n", dest, end, bounce_buffer); if ((unsigned long)end > bounce_buffer) { if ((unsigned long)dest < bounce_buffer) { unsigned char *from = dest; unsigned char *to = (unsigned char*)(lb_start-(bounce_buffer-(unsigned long)dest)); unsigned long amount = bounce_buffer-(unsigned long)dest; - printk_debug("move prefix around: from %p, to %p, amount: %lx\n", from, to, amount); + printk(BIOS_DEBUG, "move prefix around: from %p, to %p, amount: %lx\n", from, to, amount); memcpy(to, from, amount); } if ((unsigned long)end > bounce_buffer + (lb_end - lb_start)) { unsigned long from = bounce_buffer + (lb_end - lb_start); unsigned long to = lb_end; unsigned long amount = (unsigned long)end - from; - printk_debug("move suffix around: from %lx, to %lx, amount: %lx\n", from, to, amount); + printk(BIOS_DEBUG, "move suffix around: from %lx, to %lx, amount: %lx\n", from, to, amount); memcpy((char*)to, (char*)from, amount); } } @@ -545,12 +545,12 @@ static int selfboot(struct lb_memory *mem, struct cbfs_payload *payload) if (!load_self_segments(&head, mem, payload)) goto out; - printk_spew("Loaded segments\n"); + printk(BIOS_SPEW, "Loaded segments\n"); /* Reset to booting from this image as late as possible */ boot_successful(); - printk_debug("Jumping to boot code at %x\n", entry); + printk(BIOS_DEBUG, "Jumping to boot code at %x\n", entry); post_code(0xfe); /* Jump to kernel */ diff --git a/src/console/console.c b/src/console/console.c index 008130fb63..4543b0c7b3 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -76,7 +76,7 @@ void post_code(uint8_t value) { #if !defined(CONFIG_NO_POST) || CONFIG_NO_POST==0 #if CONFIG_SERIAL_POST==1 - printk_emerg("POST: 0x%02x\n", value); + printk(BIOS_EMERG, "POST: 0x%02x\n", value); #endif outb(value, 0x80); #endif @@ -85,7 +85,7 @@ void post_code(uint8_t value) /* Report a fatal error */ void __attribute__((noreturn)) die(const char *msg) { - printk_emerg("%s", msg); + printk(BIOS_EMERG, "%s", msg); post_code(0xff); while (1); /* Halt */ } diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c index 9816a154d4..939990997c 100644 --- a/src/cpu/amd/car/post_cache_as_ram.c +++ b/src/cpu/amd/car/post_cache_as_ram.c @@ -5,7 +5,7 @@ static inline void print_debug_pcar(const char *strval, uint32_t val) { - printk_debug("%s%08x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%08x\r\n", strval, val); } /* from linux kernel 2.6.32 asm/string_32.h */ diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c index 9001ec76a7..ac201e4f41 100644 --- a/src/cpu/amd/dualcore/amd_sibling.c +++ b/src/cpu/amd/dualcore/amd_sibling.c @@ -109,7 +109,7 @@ unsigned get_apicid_base(unsigned ioapic_num) if((apicid_base+ioapic_num-1)>0xf) { // We need to enable APIC EXT ID - printk_info("if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in romstage.c so you can spare 16 id for ioapic\r\n"); + printk(BIOS_INFO, "if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in romstage.c so you can spare 16 id for ioapic\r\n"); enable_apic_ext_id(nodes); } @@ -140,7 +140,7 @@ void amd_sibling_init(device_t cpu) } #if 1 - printk_debug("CPU: %u %d siblings\n", + printk(BIOS_DEBUG, "CPU: %u %d siblings\n", cpu->path.apic.apic_id, siblings); #endif @@ -191,7 +191,7 @@ void amd_sibling_init(device_t cpu) new->path.apic.core_id = i; #if 1 - printk_debug("CPU: %u has sibling %u\n", + printk(BIOS_DEBUG, "CPU: %u has sibling %u\n", cpu->path.apic.apic_id, new->path.apic.apic_id); #endif diff --git a/src/cpu/amd/microcode/microcode.c b/src/cpu/amd/microcode/microcode.c index 1649b8222b..08f61c2a9a 100644 --- a/src/cpu/amd/microcode/microcode.c +++ b/src/cpu/amd/microcode/microcode.c @@ -61,8 +61,8 @@ static int need_apply_patch(struct microcode *m, u32 equivalent_processor_rev_id { if (m->processor_rev_id != equivalent_processor_rev_id) { - printk_err("microcode: rev id (%x) does not match this patch.\n", m->processor_rev_id); - printk_err("microcode: Not updated! Fix microcode_updates[] \n"); + printk(BIOS_ERR, "microcode: rev id (%x) does not match this patch.\n", m->processor_rev_id); + printk(BIOS_ERR, "microcode: Not updated! Fix microcode_updates[] \n"); return 0; } if (m->nb_dev_id) { @@ -93,7 +93,7 @@ void amd_update_microcode(void *microcode_updates, u32 equivalent_processor_rev_ msr = rdmsr(0x8b); patch_id = msr.lo; - printk_debug("microcode: equivalent rev id = 0x%04x, current patch id = 0x%08x\n", equivalent_processor_rev_id, patch_id); + printk(BIOS_DEBUG, "microcode: equivalent rev id = 0x%04x, current patch id = 0x%08x\n", equivalent_processor_rev_id, patch_id); m = microcode_updates; @@ -107,13 +107,13 @@ void amd_update_microcode(void *microcode_updates, u32 equivalent_processor_rev_ wrmsr(0xc0010020, msr); - printk_debug("microcode: patch id to apply = 0x%08x\n", m->patch_id); + printk(BIOS_DEBUG, "microcode: patch id to apply = 0x%08x\n", m->patch_id); //read the patch_id again msr = rdmsr(0x8b); new_patch_id = msr.lo; - printk_debug("microcode: updated to patch id = 0x%08x %s\n", new_patch_id , (new_patch_id == m->patch_id)?" success\n":" fail\n" ); + printk(BIOS_DEBUG, "microcode: updated to patch id = 0x%08x %s\n", new_patch_id , (new_patch_id == m->patch_id)?" success\n":" fail\n" ); break; } c += 2048; diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index 23a5642867..b1d6bae7a6 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -28,21 +28,21 @@ static void print_debug_fv(const char *str, u32 val) { #if FAM10_SET_FIDVID_DEBUG == 1 - printk_debug("%s%x\n", str, val); + printk(BIOS_DEBUG, "%s%x\n", str, val); #endif } static void print_debug_fv_8(const char *str, u8 val) { #if FAM10_SET_FIDVID_DEBUG == 1 - printk_debug("%s%02x\n", str, val); + printk(BIOS_DEBUG, "%s%02x\n", str, val); #endif } static void print_debug_fv_64(const char *str, u32 val, u32 val2) { #if FAM10_SET_FIDVID_DEBUG == 1 - printk_debug("%s%x%x\n", str, val, val2); + printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2); #endif } @@ -68,7 +68,7 @@ static void enable_fid_change(u8 fid) dword |= (u32) fid & 0x1F; dword |= 1 << 5; // enable pci_write_config32(dev, 0xd4, dword); - printk_debug("FID Change Node:%02x, F3xD4: %08x \n", i, dword); + printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x \n", i, dword); } } @@ -186,7 +186,7 @@ static void prep_fid_change(void) nodes = get_nodes(); for(i = 0; i < nodes; i++) { - printk_debug("Prep FID/VID Node:%02x \n", i); + printk(BIOS_DEBUG, "Prep FID/VID Node:%02x \n", i); dev = NODE_PCI(i,3); dword = pci_read_config32(dev, 0xd8); @@ -286,15 +286,15 @@ static void prep_fid_change(void) pci_write_config32(dev, 0x80, dword); dword = pci_read_config32(dev, 0x80); - printk_debug(" F3x80: %08x \n", dword); + printk(BIOS_DEBUG, " F3x80: %08x \n", dword); dword = pci_read_config32(dev, 0x84); - printk_debug(" F3x84: %08x \n", dword); + printk(BIOS_DEBUG, " F3x84: %08x \n", dword); dword = pci_read_config32(dev, 0xD4); - printk_debug(" F3xD4: %08x \n", dword); + printk(BIOS_DEBUG, " F3xD4: %08x \n", dword); dword = pci_read_config32(dev, 0xD8); - printk_debug(" F3xD8: %08x \n", dword); + printk(BIOS_DEBUG, " F3xD8: %08x \n", dword); dword = pci_read_config32(dev, 0xDC); - printk_debug(" F3xDC: %08x \n", dword); + printk(BIOS_DEBUG, " F3xDC: %08x \n", dword); } @@ -495,7 +495,7 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) u8 nodes; u8 i; - printk_debug("FIDVID on AP: %02x\n", apicid); + printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid); /* Steps 1-6 of BIOS NB COF and VID Configuration * for SVI and Single-Plane PVI Systems. @@ -773,7 +773,7 @@ static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) u32 reg1fc; u8 pvimode; - printk_debug("FIDVID on BSP, APIC_id: %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "FIDVID on BSP, APIC_id: %02x\n", bsp_apicid); /* FIXME: The first half of this function is nearly the same as * init_fidvid_bsp() and the code could be combined. */ diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index c43887f380..d0458dfed5 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -32,24 +32,24 @@ static void print_initcpu8 (const char *strval, u8 val) { - printk_debug("%s%02x\n", strval, val); + printk(BIOS_DEBUG, "%s%02x\n", strval, val); } static void print_initcpu8_nocr (const char *strval, u8 val) { - printk_debug("%s%02x", strval, val); + printk(BIOS_DEBUG, "%s%02x", strval, val); } static void print_initcpu16 (const char *strval, u16 val) { - printk_debug("%s%04x\n", strval, val); + printk(BIOS_DEBUG, "%s%04x\n", strval, val); } static void print_initcpu(const char *strval, u32 val) { - printk_debug("%s%08x\n", strval, val); + printk(BIOS_DEBUG, "%s%08x\n", strval, val); } @@ -223,7 +223,7 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid); static inline __attribute__((always_inline)) void print_apicid_nodeid_coreid(u32 apicid, struct node_core_id id, const char *str) { - printk_debug("%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str, apicid, id.nodeid, id.coreid); + printk(BIOS_DEBUG, "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str, apicid, id.nodeid, id.coreid); } @@ -406,10 +406,10 @@ static u32 init_cpus(u32 cpu_init_detectedx) { // check warm(bios) reset to call stage2 otherwise do stage1 if (warm_reset_detect(id.nodeid)) { - printk_debug("init_fidvid_stage2 apicid: %02x\n", apicid); + printk(BIOS_DEBUG, "init_fidvid_stage2 apicid: %02x\n", apicid); init_fidvid_stage2(apicid, id.nodeid); } else { - printk_debug("init_fidvid_ap(stage1) apicid: %02x\n", apicid); + printk(BIOS_DEBUG, "init_fidvid_ap(stage1) apicid: %02x\n", apicid); init_fidvid_ap(bsp_apicid, apicid, id.nodeid, id.coreid); } } @@ -424,7 +424,7 @@ static u32 init_cpus(u32 cpu_init_detectedx) set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK); STOP_CAR_AND_CPU(); - printk_debug("\nAP %02x should be halted but you are reading this....\n", apicid); + printk(BIOS_DEBUG, "\nAP %02x should be halted but you are reading this....\n", apicid); } return bsp_apicid; @@ -449,12 +449,12 @@ static void wait_all_core0_started(void) u32 i; u32 nodes = get_nodes(); - printk_debug("Wait all core0s started \n"); + printk(BIOS_DEBUG, "Wait all core0s started \n"); for(i=1;i<nodes;i++) { // skip bsp, because it is running on bsp while(!is_core0_started(i)) {} print_initcpu8(" Core0 started on node: ", i); } - printk_debug("Wait all core0s started done\n"); + printk(BIOS_DEBUG, "Wait all core0s started done\n"); } #if CONFIG_MAX_PHYSICAL_CPUS > 1 /** @@ -471,7 +471,7 @@ static void start_node(u8 node) u32 val; /* Enable routing table */ - printk_debug("Start node %02x", node); + printk(BIOS_DEBUG, "Start node %02x", node); #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 /* For FAM10 support, we need to set Dram base/limit for the new node */ @@ -484,7 +484,7 @@ static void start_node(u8 node) val &= ~(1 << 1); pci_write_config32(NODE_HT(node), 0x6c, val); - printk_debug(" done.\n"); + printk(BIOS_DEBUG, " done.\n"); } @@ -514,7 +514,7 @@ static void setup_remote_node(u8 node) }; u16 i; - printk_debug("setup_remote_node: %02x", node); + printk(BIOS_DEBUG, "setup_remote_node: %02x", node); /* copy the default resource map from node 0 */ for(i = 0; i < ARRAY_SIZE(pci_reg); i++) { @@ -525,7 +525,7 @@ static void setup_remote_node(u8 node) pci_write_config32(NODE_MP(node), reg, value); } - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } #endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */ @@ -845,7 +845,7 @@ void cpuSetAMDMSR(void) u8 i; u32 revision, platform; - printk_debug("cpuSetAMDMSR "); + printk(BIOS_DEBUG, "cpuSetAMDMSR "); revision = mctGetLogicalCPUID(0xFF); platform = get_platform_type(); @@ -863,7 +863,7 @@ void cpuSetAMDMSR(void) } AMD_Errata298(); - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } @@ -879,7 +879,7 @@ void cpuSetAMDPCI(u8 node) u32 val; u8 offset; - printk_debug("cpuSetAMDPCI %02d", node); + printk(BIOS_DEBUG, "cpuSetAMDPCI %02d", node); revision = mctGetLogicalCPUID(node); @@ -933,7 +933,7 @@ void cpuSetAMDPCI(u8 node) if (revision & (AMD_DR_B2 | AMD_DR_B3)) dctPhyDiag(); */ - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } diff --git a/src/cpu/amd/model_10xxx/model_10xxx_init.c b/src/cpu/amd/model_10xxx/model_10xxx_init.c index 6ef1f42471..407121d2d8 100644 --- a/src/cpu/amd/model_10xxx/model_10xxx_init.c +++ b/src/cpu/amd/model_10xxx/model_10xxx_init.c @@ -77,7 +77,7 @@ void model_10xxx_init(device_t dev) #endif id = get_node_core_id(read_nb_cfg_54()); /* nb_cfg_54 can not be set */ - printk_debug("nodeid = %02d, coreid = %02d\n", id.nodeid, id.coreid); + printk(BIOS_DEBUG, "nodeid = %02d, coreid = %02d\n", id.nodeid, id.coreid); /* Turn on caching if we haven't already */ x86_enable_cache(); @@ -114,7 +114,7 @@ void model_10xxx_init(device_t dev) msr.hi |= 1 << (33-32); wrmsr_amd(CPU_ID_EXT_FEATURES_MSR, msr); } - printk_debug("siblings = %02d, ", siblings); + printk(BIOS_DEBUG, "siblings = %02d, ", siblings); #endif /* DisableCf8ExtCfg */ diff --git a/src/cpu/amd/model_10xxx/processor_name.c b/src/cpu/amd/model_10xxx/processor_name.c index 65f97765b2..29bc50802d 100644 --- a/src/cpu/amd/model_10xxx/processor_name.c +++ b/src/cpu/amd/model_10xxx/processor_name.c @@ -226,7 +226,7 @@ done: strcpymax(&program_string[j], processor_name_string, sizeof(program_string) - j); - printk_debug("CPU model: %s\n", program_string); + printk(BIOS_DEBUG, "CPU model: %s\n", program_string); for (i = 0; i < 6; i++) { msr.lo = p_program_string[(2 * i) + 0]; diff --git a/src/cpu/amd/model_10xxx/update_microcode.c b/src/cpu/amd/model_10xxx/update_microcode.c index a24b83d42e..85b1aa84bf 100644 --- a/src/cpu/amd/model_10xxx/update_microcode.c +++ b/src/cpu/amd/model_10xxx/update_microcode.c @@ -97,7 +97,7 @@ void update_microcode(u32 cpu_deviceid) if (equivalent_processor_rev_id != 0) { amd_update_microcode((void *) microcode_updates, equivalent_processor_rev_id); } else { - printk_debug("microcode: rev id not found. Skipping microcode patch!\n"); + printk(BIOS_DEBUG, "microcode: rev id not found. Skipping microcode patch!\n"); } } diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c index 47ddbdf44c..59cb5460d2 100644 --- a/src/cpu/amd/model_fxx/fidvid.c +++ b/src/cpu/amd/model_fxx/fidvid.c @@ -15,21 +15,21 @@ static inline void print_debug_fv(const char *str, unsigned val) { #if K8_SET_FIDVID_DEBUG == 1 - printk_debug("%s%x\r\n", str, val); + printk(BIOS_DEBUG, "%s%x\r\n", str, val); #endif } static inline void print_debug_fv_8(const char *str, unsigned val) { #if K8_SET_FIDVID_DEBUG == 1 - printk_debug("%s%02x\r\n", str, val); + printk(BIOS_DEBUG, "%s%02x\r\n", str, val); #endif } static inline void print_debug_fv_64(const char *str, unsigned val, unsigned val2) { #if K8_SET_FIDVID_DEBUG == 1 - printk_debug("%s%x%x\r\n", str, val, val2); + printk(BIOS_DEBUG, "%s%x%x\r\n", str, val, val2); #endif } @@ -131,7 +131,7 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) apicidx = lapicid(); if (apicid != apicidx) { - printk_err("wrong apicid, we want change %x, but it is %x\r\n", apicid, apicidx); + printk(BIOS_ERR, "wrong apicid, we want change %x, but it is %x\r\n", apicid, apicidx); return fidvid; } @@ -201,8 +201,8 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) * transition to target fid */ - printk_debug("Current fid_cur: 0x%x, fid_max: 0x%x\n", fid_cur, fid_max); - printk_debug("Requested fid_new: 0x%x\n", fid_new); + printk(BIOS_DEBUG, "Current fid_cur: 0x%x, fid_max: 0x%x\n", fid_cur, fid_max); + printk(BIOS_DEBUG, "Requested fid_new: 0x%x\n", fid_new); step_limit = 8; /* max 8 steps just in case... */ while ((fid_cur != fid_new) && (step_limit--)) { @@ -218,7 +218,7 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) /* If 200Mhz step OR past 3200 max table value */ if ((step == 2) || (fid_new >= 0x18 || fid_cur >= 0x18)) { - printk_debug("200MHZ step "); + printk(BIOS_DEBUG, "200MHZ step "); /* Step +/- 200MHz at a time */ if (fid_cur < fid_new) @@ -231,7 +231,7 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) int temp; /* look it up in the table */ - printk_debug("FidVid table step "); + printk(BIOS_DEBUG, "FidVid table step "); temp = next_fid_200[((fid_new/2) * 13) + (fid_cur/2)]; @@ -243,7 +243,7 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) break; /* table error */ } else { /* step < 2 (100MHZ) */ - printk_debug("100MHZ step "); + printk(BIOS_DEBUG, "100MHZ step "); /* The table adjust in 200MHz increments. If requested, * do the 100MHz increment if the CPU supports it.*/ @@ -251,17 +251,17 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) fid_temp = fid_cur + 1; } else { /* 100 MHZ not supported. Get out of the loop */ - printk_debug("is not supported.\n"); + printk(BIOS_DEBUG, "is not supported.\n"); break; } } if(fid_temp > fid_max) { - printk_debug("fid_temp 0x%x > fid_max 0x%x\n", fid_temp, fid_max); + printk(BIOS_DEBUG, "fid_temp 0x%x > fid_max 0x%x\n", fid_temp, fid_max); break; } - printk_debug("fidvid: 0x%x\n", fid_temp); + printk(BIOS_DEBUG, "fidvid: 0x%x\n", fid_temp); /* set target fid */ msr.hi = 0x190; /* 2 us for AMD NPT Family 0Fh Processors */ diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c index 510c803ca9..847a8a7fa6 100644 --- a/src/cpu/amd/model_fxx/init_cpus.c +++ b/src/cpu/amd/model_fxx/init_cpus.c @@ -16,23 +16,23 @@ static inline void print_initcpu8 (const char *strval, unsigned val) { - printk_debug("%s%02x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%02x\r\n", strval, val); } static inline void print_initcpu8_nocr (const char *strval, unsigned val) { - printk_debug("%s%02x", strval, val); + printk(BIOS_DEBUG, "%s%02x", strval, val); } static inline void print_initcpu16 (const char *strval, unsigned val) { - printk_debug("%s%04x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%04x\r\n", strval, val); } static inline void print_initcpu(const char *strval, unsigned val) { - printk_debug("%s%08x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%08x\r\n", strval, val); } typedef void (*process_ap_t)(unsigned apicid, void *gp); @@ -155,7 +155,7 @@ static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid); static inline __attribute__((always_inline)) void print_apicid_nodeid_coreid(unsigned apicid, struct node_core_id id, const char *str) { - printk_debug("%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\r\n", str, apicid, id.nodeid, id.coreid); + printk(BIOS_DEBUG, "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\r\n", str, apicid, id.nodeid, id.coreid); } diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index 4d9dc3328e..47eae695e8 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -150,16 +150,16 @@ static void print_mtrr_state(struct mtrr_state *state) { int i; for(i = 0; i < MTRR_COUNT; i++) { - printk_debug("var mtrr %d: %08x%08x mask: %08x%08x\n", + printk(BIOS_DEBUG, "var mtrr %d: %08x%08x mask: %08x%08x\n", i, state->mtrrs[i].base.hi, state->mtrrs[i].base.lo, state->mtrrs[i].mask.hi, state->mtrrs[i].mask.lo); } - printk_debug("top_mem: %08x%08x\n", + printk(BIOS_DEBUG, "top_mem: %08x%08x\n", state->top_mem.hi, state->top_mem.lo); - printk_debug("top_mem2: %08x%08x\n", + printk(BIOS_DEBUG, "top_mem2: %08x%08x\n", state->top_mem2.hi, state->top_mem2.lo); - printk_debug("def_type: %08x%08x\n", + printk(BIOS_DEBUG, "def_type: %08x%08x\n", state->def_type.hi, state->def_type.lo); } #endif @@ -214,7 +214,7 @@ static inline void clear_2M_ram(unsigned long basek, struct mtrr_state *mtrr_sta enable_lapic(); /* Print a status message */ - printk_debug("%c", (basek >= TOLM_KB)?'+':'-'); + printk(BIOS_DEBUG, "%c", (basek >= TOLM_KB)?'+':'-'); /* Return to the initialization state */ set_init_ecc_mtrrs(); @@ -232,7 +232,7 @@ static inline void clear_2M_ram(unsigned long basek, struct mtrr_state *mtrr_sta size = (limitk - basek) << 10; addr = map_2M_page(basek >> 11); if (addr == MAPPING_ERROR) { - printk_err("Cannot map page: %lx\n", basek >> 11); + printk(BIOS_ERR, "Cannot map page: %lx\n", basek >> 11); return; } @@ -276,14 +276,14 @@ static void init_ecc_memory(unsigned node_id) } else { pci_write_config32(f3_dev, SCRUB_CONTROL, (SCRUB_NONE << 16) | (SCRUB_NONE << 8) | (SCRUB_NONE << 0)); - printk_debug("Scrubbing Disabled\n"); + printk(BIOS_DEBUG, "Scrubbing Disabled\n"); } /* If ecc support is not enabled don't touch memory */ dcl = pci_read_config32(f2_dev, DRAM_CONFIG_LOW); if (!(dcl & DCL_DimmEccEn)) { - printk_debug("ECC Disabled\n"); + printk(BIOS_DEBUG, "ECC Disabled\n"); return; } @@ -313,7 +313,7 @@ static void init_ecc_memory(unsigned node_id) begink = (CONFIG_RAMTOP >>10); } - printk_debug("Clearing memory %luK - %luK: ", begink, endk); + printk(BIOS_DEBUG, "Clearing memory %luK - %luK: ", begink, endk); /* Save the normal state */ save_mtrr_state(&mtrr_state); @@ -362,7 +362,7 @@ static void init_ecc_memory(unsigned node_id) (SCRUB_84ms << 16) | (SCRUB_84ms << 8) | (SCRUB_84ms << 0)); } - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } diff --git a/src/cpu/amd/model_fxx/powernow_acpi.c b/src/cpu/amd/model_fxx/powernow_acpi.c index 86d1c2d557..5339f3b5bf 100644 --- a/src/cpu/amd/model_fxx/powernow_acpi.c +++ b/src/cpu/amd/model_fxx/powernow_acpi.c @@ -156,14 +156,14 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) v[10] = cpuid1.ecx; v[11] = cpuid1.edx; processor_brand[48] = 0; - printk_info("processor_brand=%s\n", processor_brand); + printk(BIOS_INFO, "processor_brand=%s\n", processor_brand); /* * Based on the CPU socket type,cmp_cap and pwr_lmt , get the power limit. * socket_type : 0x10 SocketF; 0x11 AM2/ASB1 ; 0x12 S1G1 * cmp_cap : 0x0 SingleCore ; 0x1 DualCore */ - printk_info("Pstates Algorithm ...\n"); + printk(BIOS_INFO, "Pstates Algorithm ...\n"); cmp_cap = (pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x18, 3)), 0xE8) & 0x3000) >> 12; @@ -181,7 +181,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) /* See if the CPUID(0x80000007) returned EDX[2:1]==11b */ cpuid1 = cpuid(0x80000007); if ((cpuid1.edx & 0x6) != 0x6) { - printk_info("No valid set of P-states\n"); + printk(BIOS_INFO, "No valid set of P-states\n"); goto write_pstates; } @@ -204,7 +204,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) PstateStep_coef = 2; if (IntPstateSup == 0) { - printk_info("No intermediate P-states are supported\n"); + printk(BIOS_INFO, "No intermediate P-states are supported\n"); goto write_pstates; } @@ -352,12 +352,12 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) /* Print Pstate freq,vid,volt,power */ for (index = 0; index < Pstate_num; index++) { - printk_info("Pstate_freq[%d] = %dMHz\t", index, + printk(BIOS_INFO, "Pstate_freq[%d] = %dMHz\t", index, Pstate_feq[index]); - printk_info("Pstate_vid[%d] = %d\t", index, Pstate_vid[index]); - printk_info("Pstate_volt[%d] = %dmv\t", index, + printk(BIOS_INFO, "Pstate_vid[%d] = %d\t", index, Pstate_vid[index]); + printk(BIOS_INFO, "Pstate_volt[%d] = %dmv\t", index, Pstate_volt[index]); - printk_info("Pstate_power[%d] = %dmw\n", index, + printk(BIOS_INFO, "Pstate_power[%d] = %dmw\n", index, Pstate_power[index]); } diff --git a/src/cpu/amd/model_fxx/processor_name.c b/src/cpu/amd/model_fxx/processor_name.c index ce276ffcca..4d86467632 100644 --- a/src/cpu/amd/model_fxx/processor_name.c +++ b/src/cpu/amd/model_fxx/processor_name.c @@ -443,7 +443,7 @@ int init_processor_name(void) } } - printk_debug("CPU model %s\n", program_string); + printk(BIOS_DEBUG, "CPU model %s\n", program_string); for (i=0; i<6; i++) { progmsr.lo = program_values[(2*i)+0]; diff --git a/src/cpu/amd/model_gx2/cpubug.c b/src/cpu/amd/model_gx2/cpubug.c index 8bbbf7b700..fcee30bb23 100644 --- a/src/cpu/amd/model_gx2/cpubug.c +++ b/src/cpu/amd/model_gx2/cpubug.c @@ -169,7 +169,7 @@ eng2900(void) { msr_t msr; - printk_debug("CPU_BUG:%s\n", __func__); + printk(BIOS_DEBUG, "CPU_BUG:%s\n", __func__); /* Clear bit 43, disables the sysenter/sysexit in CPUID3 */ msr = rdmsr(0x3003); msr.hi &= 0xFFFFF7FF; @@ -356,10 +356,10 @@ cpubug(void) rev = msr.lo & 0xff; if (rev < 0x20) { - printk_err("%s: rev < 0x20! bailing!\n"); + printk(BIOS_ERR, "%s: rev < 0x20! bailing!\n"); return; } - printk_debug("Doing cpubug fixes for rev 0x%x\n", rev); + printk(BIOS_DEBUG, "Doing cpubug fixes for rev 0x%x\n", rev); switch(rev) { case 0x20: @@ -379,11 +379,11 @@ cpubug(void) case 0x30: break; default: - printk_err("unknown rev %x, bailing\n", rev); + printk(BIOS_ERR, "unknown rev %x, bailing\n", rev); return; } bug784(); bug118253(); disablememoryreadorder(); - printk_debug("Done cpubug fixes \n"); + printk(BIOS_DEBUG, "Done cpubug fixes \n"); } diff --git a/src/cpu/amd/model_gx2/model_gx2_init.c b/src/cpu/amd/model_gx2/model_gx2_init.c index 580b04c7bd..435e89aa81 100644 --- a/src/cpu/amd/model_gx2/model_gx2_init.c +++ b/src/cpu/amd/model_gx2/model_gx2_init.c @@ -19,7 +19,7 @@ static void vsm_end_post_smi(void) static void model_gx2_init(device_t dev) { - printk_debug("model_gx2_init\n"); + printk(BIOS_DEBUG, "model_gx2_init\n"); /* Turn on caching if we haven't already */ x86_enable_cache(); @@ -29,7 +29,7 @@ static void model_gx2_init(device_t dev) vsm_end_post_smi(); - printk_debug("model_gx2_init DONE\n"); + printk(BIOS_DEBUG, "model_gx2_init DONE\n"); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/amd/model_gx2/vsmsetup.c b/src/cpu/amd/model_gx2/vsmsetup.c index 7fa33fc0c2..aa25042a61 100644 --- a/src/cpu/amd/model_gx2/vsmsetup.c +++ b/src/cpu/amd/model_gx2/vsmsetup.c @@ -187,16 +187,16 @@ void do_vsmbios(void) unsigned char *buf; int i; - printk_err( "do_vsmbios\n"); + printk(BIOS_ERR, "do_vsmbios\n"); /* Clear VSM BIOS data area. */ for (i = 0x400; i < 0x500; i++) *(volatile unsigned char *)i = 0; if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) { - printk_err("do_vsmbios: Failed to load VSA.\n"); + printk(BIOS_ERR, "do_vsmbios: Failed to load VSA.\n"); } buf = VSA2_BUFFER; - printk_debug("buf[0x20] signature is %x:%x:%x:%x\n", + printk(BIOS_DEBUG, "buf[0x20] signature is %x:%x:%x:%x\n", buf[0x20], buf[0x21], buf[0x22], buf[0x23]); /* Check for POST code at start of vsainit.bin. If you don't see it, * don't bother. @@ -207,7 +207,7 @@ void do_vsmbios(void) } /* ecx gets smm, edx gets sysm. */ - printk_err("Call real_mode_switch_call_vsm\n"); + printk(BIOS_ERR, "Call real_mode_switch_call_vsm\n"); // real_mode_switch_call_vsm(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM); /* Restart Timer 1. */ @@ -216,7 +216,7 @@ void do_vsmbios(void) /* Check that VSA is running OK. */ if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE) - printk_debug("do_vsmbios: VSA2 VR signature verified\n"); + printk(BIOS_DEBUG, "do_vsmbios: VSA2 VR signature verified\n"); else die("FATAL: VSA2 VR signature not valid, install failed!\n"); } diff --git a/src/cpu/amd/model_lx/cpubug.c b/src/cpu/amd/model_lx/cpubug.c index 761f0dceb3..203d63b81e 100644 --- a/src/cpu/amd/model_lx/cpubug.c +++ b/src/cpu/amd/model_lx/cpubug.c @@ -87,5 +87,5 @@ void cpubug(void) { pcideadlock(); disablememoryreadorder(); - printk_debug("Done cpubug fixes \n"); + printk(BIOS_DEBUG, "Done cpubug fixes \n"); } diff --git a/src/cpu/amd/model_lx/model_lx_init.c b/src/cpu/amd/model_lx/model_lx_init.c index b1b829f1a5..85e6bfbb27 100644 --- a/src/cpu/amd/model_lx/model_lx_init.c +++ b/src/cpu/amd/model_lx/model_lx_init.c @@ -40,7 +40,7 @@ static void vsm_end_post_smi(void) static void model_lx_init(device_t dev) { - printk_debug("model_lx_init\n"); + printk(BIOS_DEBUG, "model_lx_init\n"); /* Turn on caching if we haven't already */ x86_enable_cache(); @@ -52,11 +52,11 @@ static void model_lx_init(device_t dev) vsm_end_post_smi(); // Set gate A20 (legacy vsm disables it in late init) - printk_debug("A20 (0x92): %d\n", inb(0x92)); + printk(BIOS_DEBUG, "A20 (0x92): %d\n", inb(0x92)); outb(0x02, 0x92); - printk_debug("A20 (0x92): %d\n", inb(0x92)); + printk(BIOS_DEBUG, "A20 (0x92): %d\n", inb(0x92)); - printk_debug("CPU model_lx_init DONE\n"); + printk(BIOS_DEBUG, "CPU model_lx_init DONE\n"); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/amd/model_lx/vsmsetup.c b/src/cpu/amd/model_lx/vsmsetup.c index 2c871b49dd..290fa864df 100644 --- a/src/cpu/amd/model_lx/vsmsetup.c +++ b/src/cpu/amd/model_lx/vsmsetup.c @@ -274,7 +274,7 @@ void do_vsmbios(void) unsigned int size = SMM_SIZE * 1024; int i; - printk_err("do_vsmbios\n"); + printk(BIOS_ERR, "do_vsmbios\n"); /* clear vsm bios data area */ for (i = 0x400; i < 0x500; i++) { *(volatile unsigned char *)i = 0; @@ -288,23 +288,23 @@ void do_vsmbios(void) */ if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) { - printk_err("do_vsmbios: Failed to load VSA.\n"); + printk(BIOS_ERR, "do_vsmbios: Failed to load VSA.\n"); } buf = (unsigned char *)VSA2_BUFFER; - printk_debug("buf %p *buf %d buf[256k] %d\n", + printk(BIOS_DEBUG, "buf %p *buf %d buf[256k] %d\n", buf, buf[0], buf[SMM_SIZE * 1024]); - printk_debug("buf[0x20] signature is %x:%x:%x:%x\n", + printk(BIOS_DEBUG, "buf[0x20] signature is %x:%x:%x:%x\n", buf[0x20], buf[0x21], buf[0x22], buf[0x23]); /* check for post code at start of vsainit.bin. If you don't see it, don't bother. */ if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) || (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) { - printk_err("do_vsmbios: no vsainit.bin signature, skipping!\n"); + printk(BIOS_ERR, "do_vsmbios: no vsainit.bin signature, skipping!\n"); return; } /* ecx gets smm, edx gets sysm */ - printk_err("Call real_mode_switch_call_vsm\n"); + printk(BIOS_ERR, "Call real_mode_switch_call_vsm\n"); real_mode_switch_call_vsm(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM); /* restart timer 1 */ @@ -313,10 +313,9 @@ void do_vsmbios(void) // check that VSA is running OK if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE) - printk_debug("do_vsmbios: VSA2 VR signature verified\n"); + printk(BIOS_DEBUG, "do_vsmbios: VSA2 VR signature verified\n"); else - printk_err - ("do_vsmbios: VSA2 VR signature not valid, install failed!\n"); + printk(BIOS_ERR, "do_vsmbios: VSA2 VR signature not valid, install failed!\n"); } // we had hoped to avoid this. @@ -495,30 +494,30 @@ int biosint(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", (u32)ip, (u32)cs, (u32)flags); - printk_debug("biosint: gs 0x%x fs 0x%x ds 0x%x es 0x%x\n", + printk(BIOS_DEBUG, "biosint: gs 0x%x fs 0x%x ds 0x%x es 0x%x\n", (u16)(gsfs >> 16), (u16)(gsfs & 0xffff), (u16)(dses >> 16), (u16)(dses & 0xffff)); // cases in a good compiler are just as good as your own tables. switch (intnumber) { case 0 ... 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception 0x%x\n", (u32)intnumber); + printk(BIOS_INFO, "biosint: Oops, exception 0x%x\n", (u32)intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *)esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *)esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out ... not now\n"); + printk(BIOS_DEBUG, "biosint: Bailing out ... not now\n"); // "longjmp" //vga_exit(); break; @@ -537,7 +536,7 @@ int biosint(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupported int #0x%x\n", (u32)intnumber); + printk(BIOS_INFO, "BIOSINT: Unsupported int #0x%x\n", (u32)intnumber); break; } if (ret) @@ -648,7 +647,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; @@ -675,8 +674,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (!dev) { - printk_debug - ("0x%x: BAD DEVICE bus %d devfn 0x%x\n", + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; @@ -711,15 +709,14 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug - ("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } @@ -731,7 +728,7 @@ int handleint21(unsigned long *edi, unsigned long *esi, unsigned long *ebp, unsigned long *ecx, unsigned long *eax, unsigned long *flags) { int res = -1; - printk_debug("handleint21, eax 0x%x\n", (u32)*eax); + printk(BIOS_DEBUG, "handleint21, eax 0x%x\n", (u32)*eax); switch (*eax & 0xffff) { case 0x5f19: break; diff --git a/src/cpu/amd/mtrr/amd_mtrr.c b/src/cpu/amd/mtrr/amd_mtrr.c index 90aacabed0..d5e8338cad 100644 --- a/src/cpu/amd/mtrr/amd_mtrr.c +++ b/src/cpu/amd/mtrr/amd_mtrr.c @@ -95,7 +95,7 @@ static void set_fixed_mtrr_resource(void *gp, struct device *dev, struct resourc if (start_mtrr >= NUM_FIXED_RANGES) { return; } - printk_debug("Setting fixed MTRRs(%d-%d) Type: WB, RdMEM, WrMEM\n", + printk(BIOS_DEBUG, "Setting fixed MTRRs(%d-%d) Type: WB, RdMEM, WrMEM\n", start_mtrr, last_mtrr); set_fixed_mtrrs(start_mtrr, last_mtrr, MTRR_TYPE_WRBACK | MTRR_READ_MEM | MTRR_WRITE_MEM); @@ -116,9 +116,9 @@ void amd_setup_mtrrs(void) wrmsr(SYSCFG_MSR, msr); enable_cache(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Initialized the fixed_mtrrs to uncached */ - printk_debug("Setting fixed MTRRs(%d-%d) type: UC\n", + printk(BIOS_DEBUG, "Setting fixed MTRRs(%d-%d) type: UC\n", 0, NUM_FIXED_RANGES); set_fixed_mtrrs(0, NUM_FIXED_RANGES, MTRR_TYPE_UNCACHEABLE); @@ -130,7 +130,7 @@ void amd_setup_mtrrs(void) search_global_resources( IORESOURCE_MEM | IORESOURCE_CACHEABLE, IORESOURCE_MEM | IORESOURCE_CACHEABLE, set_fixed_mtrr_resource, &state); - printk_debug("DONE fixed MTRRs\n"); + printk(BIOS_DEBUG, "DONE fixed MTRRs\n"); if (state.mmio_basek > state.tomk) { state.mmio_basek = state.tomk; diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c index 999c51807c..4f5c68efd5 100644 --- a/src/cpu/amd/quadcore/amd_sibling.c +++ b/src/cpu/amd/quadcore/amd_sibling.c @@ -114,7 +114,7 @@ u32 get_apicid_base(u32 ioapic_num) if((apicid_base+ioapic_num-1)>0xf) { // We need to enable APIC EXT ID - printk_spew("if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in MB Option.lb so you can spare 16 id for ioapic\r\n"); + printk(BIOS_SPEW, "if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in MB Option.lb so you can spare 16 id for ioapic\r\n"); enable_apic_ext_id(sysconf.nodes); } diff --git a/src/cpu/amd/quadcore/quadcore.c b/src/cpu/amd/quadcore/quadcore.c index 7d621c5375..56b59eec5f 100644 --- a/src/cpu/amd/quadcore/quadcore.c +++ b/src/cpu/amd/quadcore/quadcore.c @@ -59,7 +59,7 @@ static void real_start_other_core(u32 nodeid, u32 cores) { u32 dword, i; - printk_debug("Start other core - nodeid: %02x cores: %02x\n", nodeid, cores); + printk(BIOS_DEBUG, "Start other core - nodeid: %02x cores: %02x\n", nodeid, cores); /* set PCI_DEV(0, 0x18+nodeid, 3), 0x44 bit 27 to redirect all MC4 accesses and error logging to core0 */ @@ -88,7 +88,7 @@ static void start_other_cores(void) // disable quad_core if (read_option(CMOS_VSTART_quad_core, CMOS_VLEN_quad_core, 0) != 0) { - printk_debug("Skip additional core init\n"); + printk(BIOS_DEBUG, "Skip additional core init\n"); return; } @@ -96,7 +96,7 @@ static void start_other_cores(void) for (nodeid = 0; nodeid < nodes; nodeid++) { u32 cores = get_core_num_in_bsp(nodeid); - printk_debug("init node: %02x cores: %02x \n", nodeid, cores); + printk(BIOS_DEBUG, "init node: %02x cores: %02x \n", nodeid, cores); if (cores > 0) { real_start_other_core(nodeid, cores); } diff --git a/src/cpu/amd/sc520/sc520.c b/src/cpu/amd/sc520/sc520.c index 8b21545d48..3ab65c2ae1 100644 --- a/src/cpu/amd/sc520/sc520.c +++ b/src/cpu/amd/sc520/sc520.c @@ -36,9 +36,9 @@ static void cpu_init(device_t dev) unsigned long *l = (unsigned long *) 0xfffef088; int i; for(i = 0; i < 16; i++, l++) - printk_err("Par%d: 0x%lx\n", i, *l); + printk(BIOS_ERR, "Par%d: 0x%lx\n", i, *l); - printk_spew("SC520 random fixup ...\n"); + printk(BIOS_SPEW, "SC520 random fixup ...\n"); } @@ -49,14 +49,14 @@ static void cpu_init(device_t dev) void sc520_enable_resources(struct device *dev) { unsigned char command; - printk_spew("%s\n", __func__); + printk(BIOS_SPEW, "%s\n", __func__); command = pci_read_config8(dev, PCI_COMMAND); - printk_spew("========>%s, command 0x%x\n", __func__, command); + printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command); command |= PCI_COMMAND_MEMORY | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - printk_spew("========>%s, command 0x%x\n", __func__, command); + printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command); pci_write_config8(dev, PCI_COMMAND, command); command = pci_read_config8(dev, PCI_COMMAND); - printk_spew("========>%s, command 0x%x\n", __func__, command); + printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command); /* */ @@ -100,7 +100,7 @@ static void ram_resource(device_t dev, unsigned long index, unsigned long basek, unsigned long sizek) { struct resource *resource; - printk_spew("%s sizek 0x%x\n", __func__, sizek); + printk(BIOS_SPEW, "%s sizek 0x%x\n", __func__, sizek); if (!sizek) { return; } @@ -126,14 +126,14 @@ static uint32_t find_pci_tolm(struct bus *bus) { struct resource *min; uint32_t tolm; - printk_spew("%s\n", __func__); + printk(BIOS_SPEW, "%s\n", __func__); min = 0; search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); tolm = 0xffffffffUL; if (min && tolm > min->base) { tolm = min->base; } - printk_spew("%s returns 0x%x\n", __func__, tolm); + printk(BIOS_SPEW, "%s returns 0x%x\n", __func__, tolm); return tolm; } @@ -141,7 +141,7 @@ static void pci_domain_set_resources(device_t dev) { device_t mc_dev; uint32_t pci_tolm; - printk_spew("%s\n", __func__); + printk(BIOS_SPEW, "%s\n", __func__); pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { @@ -162,10 +162,10 @@ static void pci_domain_set_resources(device_t dev) if (reg > rambits) rambits = reg; if (reg < rambits) - printk_err("ERROR! register 0x%x is not set!\n", + printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n", ramregs[i]); } - printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); + printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); tomk = rambits*8*1024; #endif tomk = 32 * 1024; @@ -186,20 +186,20 @@ static void pci_domain_set_resources(device_t dev) #if 0 void sc520_enable_resources(device_t dev) { - printk_spew("%s\n", __func__); - printk_spew("THIS IS FOR THE SC520 =============================\n"); + printk(BIOS_SPEW, "%s\n", __func__); + printk(BIOS_SPEW, "THIS IS FOR THE SC520 =============================\n"); /* command = pci_read_config8(dev, PCI_COMMAND); - printk_spew("%s, command 0x%x\n", __func__, command); + printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command); command |= PCI_COMMAND_MEMORY; - printk_spew("%s, command 0x%x\n", __func__, command); + printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command); pci_write_config8(dev, PCI_COMMAND, command); command = pci_read_config8(dev, PCI_COMMAND); - printk_spew("%s, command 0x%x\n", __func__, command); + printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command); */ enable_childrens_resources(dev); - printk_spew("%s\n", __func__); + printk(BIOS_SPEW, "%s\n", __func__); } #endif @@ -220,7 +220,7 @@ static struct device_operations pci_domain_ops = { #if 0 static void cpu_bus_init(device_t dev) { - printk_spew("cpu_bus_init\n"); + printk(BIOS_SPEW, "cpu_bus_init\n"); } static void cpu_bus_noop(device_t dev) @@ -238,7 +238,7 @@ static struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew("%s\n", __func__); + printk(BIOS_SPEW, "%s\n", __func__); /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; diff --git a/src/cpu/emulation/qemu-x86/northbridge.c b/src/cpu/emulation/qemu-x86/northbridge.c index bac18806d4..d2e5abea91 100644 --- a/src/cpu/emulation/qemu-x86/northbridge.c +++ b/src/cpu/emulation/qemu-x86/northbridge.c @@ -81,14 +81,14 @@ static void cpu_pci_domain_set_resources(device_t dev) if (reg > rambits) rambits = reg; if (reg < rambits) - printk_err("ERROR! register 0x%x is not set!\n", + printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n", ramregs[i]); } if (rambits == 0) { - printk_err("RAM size config registers are empty; defaulting to 64 MBytes\n"); + printk(BIOS_ERR, "RAM size config registers are empty; defaulting to 64 MBytes\n"); rambits = 8; } - printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); + printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); tomk = rambits*8*1024; /* Compute the top of Low memory */ tolmk = pci_tolm >> 10; diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c index 52700fb4d2..5e77a765a8 100644 --- a/src/cpu/intel/hyperthreading/intel_sibling.c +++ b/src/cpu/intel/hyperthreading/intel_sibling.c @@ -31,7 +31,7 @@ void intel_sibling_init(device_t cpu) } #if 1 - printk_debug("CPU: %u %d siblings\n", + printk(BIOS_DEBUG, "CPU: %u %d siblings\n", cpu->path.apic.apic_id, siblings); #endif @@ -61,14 +61,14 @@ void intel_sibling_init(device_t cpu) } #if 1 - printk_debug("CPU: %u has sibling %u\n", + printk(BIOS_DEBUG, "CPU: %u has sibling %u\n", cpu->path.apic.apic_id, new->path.apic.apic_id); #endif /* Start the new cpu */ if (!start_cpu(new)) { /* Record the error in cpu? */ - printk_err("CPU %u would not start!\n", + printk(BIOS_ERR, "CPU %u would not start!\n", new->path.apic.apic_id); } } diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c index b64d0f2465..fc20c6047f 100644 --- a/src/cpu/intel/model_1067x/model_1067x_init.c +++ b/src/cpu/intel/model_1067x/model_1067x_init.c @@ -210,7 +210,7 @@ static void model_1067x_init(device_t cpu) /* Print processor name */ fill_processor_name(processor_name); - printk_info("CPU: %s.\n", processor_name); + printk(BIOS_INFO, "CPU: %s.\n", processor_name); #if CONFIG_USBDEBUG_DIRECT // Is this caution really needed? diff --git a/src/cpu/intel/model_106cx/cache_as_ram_disable.c b/src/cpu/intel/model_106cx/cache_as_ram_disable.c index 4d108765c5..b9f7f669f9 100644 --- a/src/cpu/intel/model_106cx/cache_as_ram_disable.c +++ b/src/cpu/intel/model_106cx/cache_as_ram_disable.c @@ -36,12 +36,12 @@ void stage1_main(unsigned long bist) "movl %%esp, %0\n\t" : "=a" (v_esp) ); - printk_spew("v_esp=%08x\r\n", v_esp); + printk(BIOS_SPEW, "v_esp=%08x\r\n", v_esp); } cpu_reset_x: - printk_spew("cpu_reset = %08x\r\n",cpu_reset); + printk(BIOS_SPEW, "cpu_reset = %08x\r\n",cpu_reset); if(cpu_reset == 0) { print_spew("Clearing initial memory region: "); diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c index 0be838b009..143a6f473a 100644 --- a/src/cpu/intel/model_106cx/model_106cx_init.c +++ b/src/cpu/intel/model_106cx/model_106cx_init.c @@ -171,7 +171,7 @@ static void model_106cx_init(device_t cpu) /* Print processor name */ fill_processor_name(processor_name); - printk_info("CPU: %s.\n", processor_name); + printk(BIOS_INFO, "CPU: %s.\n", processor_name); #if CONFIG_USBDEBUG_DIRECT // Is this caution really needed? diff --git a/src/cpu/intel/model_6ex/cache_as_ram_disable.c b/src/cpu/intel/model_6ex/cache_as_ram_disable.c index cbf7cdd37b..44ff264818 100644 --- a/src/cpu/intel/model_6ex/cache_as_ram_disable.c +++ b/src/cpu/intel/model_6ex/cache_as_ram_disable.c @@ -37,13 +37,13 @@ void stage1_main(unsigned long bist) "movl %%esp, %0\n" : "=a" (v_esp) ); - printk_spew("v_esp=%08x\n", v_esp); + printk(BIOS_SPEW, "v_esp=%08x\n", v_esp); #endif cpu_reset_x: - printk_spew("cpu_reset = %08x\n", cpu_reset); - printk_spew("No cache as ram now - "); + printk(BIOS_SPEW, "cpu_reset = %08x\n", cpu_reset); + printk(BIOS_SPEW, "No cache as ram now - "); /* store cpu_reset to ebx */ __asm__ volatile ( @@ -83,5 +83,5 @@ cpu_reset_x: } /* We will not return */ - printk_debug("sorry. parachute did not open.\n"); + printk(BIOS_DEBUG, "sorry. parachute did not open.\n"); } diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c index d056bda733..f879f34869 100644 --- a/src/cpu/intel/model_6ex/model_6ex_init.c +++ b/src/cpu/intel/model_6ex/model_6ex_init.c @@ -200,7 +200,7 @@ static void model_6ex_init(device_t cpu) /* Print processor name */ fill_processor_name(processor_name); - printk_info("CPU: %s.\n", processor_name); + printk(BIOS_INFO, "CPU: %s.\n", processor_name); #if CONFIG_USBDEBUG_DIRECT // Is this caution really needed? diff --git a/src/cpu/intel/model_6fx/cache_as_ram_disable.c b/src/cpu/intel/model_6fx/cache_as_ram_disable.c index 32d921e7d6..fc9a13b307 100644 --- a/src/cpu/intel/model_6fx/cache_as_ram_disable.c +++ b/src/cpu/intel/model_6fx/cache_as_ram_disable.c @@ -38,13 +38,13 @@ void stage1_main(unsigned long bist) "movl %%esp, %0\n" : "=a" (v_esp) ); - printk_spew("v_esp=%08x\n", v_esp); + printk(BIOS_SPEW, "v_esp=%08x\n", v_esp); #endif cpu_reset_x: - printk_spew("cpu_reset = %08x\n", cpu_reset); - printk_spew("No cache as ram now - "); + printk(BIOS_SPEW, "cpu_reset = %08x\n", cpu_reset); + printk(BIOS_SPEW, "No cache as ram now - "); /* store cpu_reset to ebx */ __asm__ volatile ( @@ -84,5 +84,5 @@ cpu_reset_x: } /* We will not return */ - printk_debug("sorry. parachute did not open.\n"); + printk(BIOS_DEBUG, "sorry. parachute did not open.\n"); } diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c index 620affc066..f00aba8e33 100644 --- a/src/cpu/intel/model_6fx/model_6fx_init.c +++ b/src/cpu/intel/model_6fx/model_6fx_init.c @@ -227,7 +227,7 @@ static void model_6fx_init(device_t cpu) /* Print processor name */ fill_processor_name(processor_name); - printk_info("CPU: %s.\n", processor_name); + printk(BIOS_INFO, "CPU: %s.\n", processor_name); #if CONFIG_USBDEBUG_DIRECT // Is this caution really needed? diff --git a/src/cpu/intel/speedstep/acpi.c b/src/cpu/intel/speedstep/acpi.c index 9a0291d47c..920984369e 100644 --- a/src/cpu/intel/speedstep/acpi.c +++ b/src/cpu/intel/speedstep/acpi.c @@ -56,7 +56,7 @@ static int get_fsb(void) case 3: return 166; case 5: return 100; } - printk_debug("Warning: No supported FSB frequency. Assuming 200MHz\n"); + printk(BIOS_DEBUG, "Warning: No supported FSB frequency. Assuming 200MHz\n"); return 200; } @@ -68,7 +68,7 @@ void generate_cpu_entries(void) int totalcores = determine_total_number_of_cores(); int cores_per_package = (cpuid_ebx(1)>>16) & 0xff; int numcpus = totalcores/cores_per_package; // this assumes that all CPUs share the same layout - printk_debug("Found %d CPU(s) with %d core(s) each.\n", numcpus, cores_per_package); + printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", numcpus, cores_per_package); for (cpuID=1; cpuID <=numcpus; cpuID++) { for (coreID=1; coreID<=cores_per_package; coreID++) { @@ -93,7 +93,7 @@ void generate_cpu_entries(void) int vid_max=msr.lo & 0x3f; int clock_max=get_fsb()*busratio_max; int clock_min=get_fsb()*busratio_min; - printk_debug("clocks between %d and %d MHz.\n", clock_min, clock_max); + printk(BIOS_DEBUG, "clocks between %d and %d MHz.\n", clock_min, clock_max); #define MEROM_MIN_POWER 16000 #define MEROM_MAX_POWER 35000 int power_max=MEROM_MAX_POWER; @@ -104,7 +104,7 @@ void generate_cpu_entries(void) busratio_step <<= 1; num_states >>= 1; } - printk_debug("adding %x P-States between busratio %x and %x, incl. P0\n", num_states+1, busratio_min, busratio_max); + printk(BIOS_DEBUG, "adding %x P-States between busratio %x and %x, incl. P0\n", num_states+1, busratio_min, busratio_max); int vid_step=(vid_max-vid_min)/num_states; int power_step=(power_max-power_min)/num_states; int clock_step=(clock_max-clock_min)/num_states; diff --git a/src/cpu/via/model_c7/model_c7_init.c b/src/cpu/via/model_c7/model_c7_init.c index d9d59d1c58..da946957c2 100644 --- a/src/cpu/via/model_c7/model_c7_init.c +++ b/src/cpu/via/model_c7/model_c7_init.c @@ -68,7 +68,7 @@ static int c7d_speed_translation[] = { static void set_c7_speed(int model) { int cnt, current, new, i; msr_t msr; - printk_debug("Enabling improved C7 clock and voltage.\n"); + printk(BIOS_DEBUG, "Enabling improved C7 clock and voltage.\n"); // Enable Speedstep msr = rdmsr(MSR_IA32_MISC_ENABLE); @@ -77,16 +77,16 @@ static void set_c7_speed(int model) { msr = rdmsr(MSR_IA32_PERF_STATUS); - printk_info("Voltage: %dmV (min %dmV; max %dmV)\n", + printk(BIOS_INFO, "Voltage: %dmV (min %dmV; max %dmV)\n", ((int)(msr.lo & 0xff) * 16 + 700), ((int)((msr.hi >> 16) & 0xff) * 16 + 700), ((int)(msr.hi & 0xff) * 16 + 700)); - printk_info("CPU multiplier: %dx (min %dx; max %dx)\n", + printk(BIOS_INFO, "CPU multiplier: %dx (min %dx; max %dx)\n", (int)((msr.lo >> 8) & 0xff), (int)((msr.hi >> 24) & 0xff), (int)((msr.hi >> 8) & 0xff)); - printk_debug(" msr.lo = %x\n", msr.lo); + printk(BIOS_DEBUG, " msr.lo = %x\n", msr.lo); /* Wait while CPU is busy */ cnt = 0; @@ -95,7 +95,7 @@ static void set_c7_speed(int model) { msr = rdmsr(MSR_IA32_PERF_STATUS); cnt++; if (cnt > 128) { - printk_warning("Could not update multiplier and voltage.\n"); + printk(BIOS_WARNING, "Could not update multiplier and voltage.\n"); return; } } @@ -129,7 +129,7 @@ static void set_c7_speed(int model) { msr.lo = new; msr.hi = 0; - printk_debug(" new msr.lo = %x\n", msr.lo); + printk(BIOS_DEBUG, " new msr.lo = %x\n", msr.lo); wrmsr(MSR_IA32_PERF_CTL, msr); @@ -140,13 +140,13 @@ static void set_c7_speed(int model) { msr = rdmsr(MSR_IA32_PERF_STATUS); cnt++; if (cnt > 128) { - printk_warning("Error while updating multiplier and voltage\n"); + printk(BIOS_WARNING, "Error while updating multiplier and voltage\n"); break; } } while (msr.lo & ((1 << 16) | (1 << 17))); - printk_info("Current voltage: %dmV\n", ((int)(msr.lo & 0xff) * 16 + 700)); - printk_info("Current CPU multiplier: %dx\n", (int)((msr.lo >> 8) & 0xff)); + printk(BIOS_INFO, "Current voltage: %dmV\n", ((int)(msr.lo & 0xff) * 16 + 700)); + printk(BIOS_INFO, "Current CPU multiplier: %dx\n", (int)((msr.lo >> 8) & 0xff)); } static void model_c7_init(device_t dev) @@ -157,39 +157,39 @@ static void model_c7_init(device_t dev) get_fms(&c, dev->device); - printk_info("Detected VIA "); + printk(BIOS_INFO, "Detected VIA "); switch (c.x86_model) { case 10: msr = rdmsr(0x1153); brand = (((msr.lo >> 2) ^ msr.lo) >> 18) & 3; - printk_info("Model A "); + printk(BIOS_INFO, "Model A "); break; case 13: msr = rdmsr(0x1154); brand = (((msr.lo >> 4) ^ (msr.lo >> 2))) & 0x000000ff; - printk_info("Model D "); + printk(BIOS_INFO, "Model D "); break; default: - printk_info("Model Unknown "); + printk(BIOS_INFO, "Model Unknown "); brand = 0xff; } switch (brand) { case 0: - printk_info("C7-M\n"); + printk(BIOS_INFO, "C7-M\n"); break; case 1: - printk_info("C7\n"); + printk(BIOS_INFO, "C7\n"); break; case 2: - printk_info("Eden\n"); + printk(BIOS_INFO, "Eden\n"); break; case 3: - printk_info("C7-D\n"); + printk(BIOS_INFO, "C7-D\n"); break; default: - printk_info("%02x (please report)\n", brand); + printk(BIOS_INFO, "%02x (please report)\n", brand); } /* Gear up */ diff --git a/src/cpu/x86/cache/cache.c b/src/cpu/x86/cache/cache.c index 92e4a69e29..a7cba4ac5c 100644 --- a/src/cpu/x86/cache/cache.c +++ b/src/cpu/x86/cache/cache.c @@ -4,7 +4,7 @@ void x86_enable_cache(void) { post_code(0x60); - printk_info("Enabling cache\n"); + printk(BIOS_INFO, "Enabling cache\n"); enable_cache(); } diff --git a/src/cpu/x86/lapic/lapic.c b/src/cpu/x86/lapic/lapic.c index fc736c96d2..555d74eecc 100644 --- a/src/cpu/x86/lapic/lapic.c +++ b/src/cpu/x86/lapic/lapic.c @@ -17,7 +17,7 @@ void setup_lapic(void) /* Only Pentium Pro and later have those MSR stuff */ msr_t msr; - printk_info("Setting up local apic..."); + printk(BIOS_INFO, "Setting up local apic..."); /* Enable the local apic */ msr = rdmsr(LAPIC_BASE_MSR); @@ -55,18 +55,18 @@ void setup_lapic(void) LAPIC_DELIVERY_MODE_NMI) ); - printk_debug(" apic_id: 0x%02lx ", lapicid()); + printk(BIOS_DEBUG, " apic_id: 0x%02lx ", lapicid()); #else /* !NEED_LLAPIC */ /* Only Pentium Pro and later have those MSR stuff */ msr_t msr; - printk_info("Disabling local apic..."); + printk(BIOS_INFO, "Disabling local apic..."); msr = rdmsr(LAPIC_BASE_MSR); msr.lo &= ~LAPIC_BASE_MSR_ENABLE; wrmsr(LAPIC_BASE_MSR, msr); #endif /* !NEED_LAPIC */ - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); post_code(0x9b); } diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index 3033902525..87452653ca 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -66,7 +66,7 @@ static void copy_secondary_start_to_1m_below(void) /* copy the _secondary_start to the ram below 1M*/ memcpy((unsigned char *)start_eip, (unsigned char *)_secondary_start, code_size); - printk_debug("start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); + printk(BIOS_DEBUG, "start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); #endif } @@ -80,7 +80,7 @@ static int lapic_start_cpu(unsigned long apicid) * Starting actual IPI sequence... */ - printk_spew("Asserting INIT.\n"); + printk(BIOS_SPEW, "Asserting INIT.\n"); /* * Turn INIT on target chip @@ -94,28 +94,28 @@ static int lapic_start_cpu(unsigned long apicid) lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT | LAPIC_DM_INIT); - printk_spew("Waiting for send to finish...\n"); + printk(BIOS_SPEW, "Waiting for send to finish...\n"); timeout = 0; do { - printk_spew("+"); + printk(BIOS_SPEW, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk_err("CPU %ld: First apic write timed out. Disabling\n", + printk(BIOS_ERR, "CPU %ld: First apic write timed out. Disabling\n", apicid); // too bad. - printk_err("ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); if (lapic_read(LAPIC_ESR)) { - printk_err("Try to reset ESR\n"); + printk(BIOS_ERR, "Try to reset ESR\n"); lapic_write_around(LAPIC_ESR, 0); - printk_err("ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); } return 0; } mdelay(10); - printk_spew("Deasserting INIT.\n"); + printk(BIOS_SPEW, "Deasserting INIT.\n"); /* Target chip */ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); @@ -123,15 +123,15 @@ static int lapic_start_cpu(unsigned long apicid) /* Send IPI */ lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); - printk_spew("Waiting for send to finish...\n"); + printk(BIOS_SPEW, "Waiting for send to finish...\n"); timeout = 0; do { - printk_spew("+"); + printk(BIOS_SPEW, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk_err("CPU %ld: Second apic write timed out. Disabling\n", + printk(BIOS_ERR, "CPU %ld: Second apic write timed out. Disabling\n", apicid); // too bad. return 0; @@ -148,16 +148,16 @@ static int lapic_start_cpu(unsigned long apicid) /* * Run STARTUP IPI loop. */ - printk_spew("#startup loops: %d.\n", num_starts); + printk(BIOS_SPEW, "#startup loops: %d.\n", num_starts); maxlvt = 4; for (j = 1; j <= num_starts; j++) { - printk_spew("Sending STARTUP #%d to %lu.\n", j, apicid); + printk(BIOS_SPEW, "Sending STARTUP #%d to %lu.\n", j, apicid); lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); lapic_read(LAPIC_ESR); - printk_spew("After apic_write.\n"); + printk(BIOS_SPEW, "After apic_write.\n"); /* * STARTUP IPI @@ -176,12 +176,12 @@ static int lapic_start_cpu(unsigned long apicid) */ udelay(300); - printk_spew("Startup point 1.\n"); + printk(BIOS_SPEW, "Startup point 1.\n"); - printk_spew("Waiting for send to finish...\n"); + printk(BIOS_SPEW, "Waiting for send to finish...\n"); timeout = 0; do { - printk_spew("+"); + printk(BIOS_SPEW, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); @@ -201,11 +201,11 @@ static int lapic_start_cpu(unsigned long apicid) if (send_status || accept_status) break; } - printk_spew("After Startup.\n"); + printk(BIOS_SPEW, "After Startup.\n"); if (send_status) - printk_warning("APIC never delivered???\n"); + printk(BIOS_WARNING, "APIC never delivered???\n"); if (accept_status) - printk_warning("APIC delivery error (%lx).\n", accept_status); + printk(BIOS_WARNING, "APIC delivery error (%lx).\n", accept_status); if (send_status || accept_status) return 0; return 1; @@ -294,7 +294,7 @@ void stop_this_cpu(void) id = lapic_read(LAPIC_ID) >> 24; - printk_debug("CPU %ld going down...\n", id); + printk(BIOS_DEBUG, "CPU %ld going down...\n", id); /* send an LAPIC INIT to myself */ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); @@ -302,37 +302,37 @@ void stop_this_cpu(void) /* wait for the ipi send to finish */ #if 0 - // When these two printk_spew calls are not removed, the + // When these two printk(BIOS_SPEW, ...) calls are not removed, the // machine will hang when log level is SPEW. Why? - printk_spew("Waiting for send to finish...\n"); + printk(BIOS_SPEW, "Waiting for send to finish...\n"); #endif timeout = 0; do { #if 0 - printk_spew("+"); + printk(BIOS_SPEW, "+"); #endif udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk_err("timed out\n"); + printk(BIOS_ERR, "timed out\n"); } mdelay(10); - printk_spew("Deasserting INIT.\n"); + printk(BIOS_SPEW, "Deasserting INIT.\n"); /* Deassert the LAPIC INIT */ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); - printk_spew("Waiting for send to finish...\n"); + printk(BIOS_SPEW, "Waiting for send to finish...\n"); timeout = 0; do { - printk_spew("+"); + printk(BIOS_SPEW, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk_err("timed out\n"); + printk(BIOS_ERR, "timed out\n"); } while(1) { @@ -387,7 +387,7 @@ static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) if (!start_cpu(cpu)) { /* Record the error in cpu? */ - printk_err("CPU 0x%02x would not start!\n", + printk(BIOS_ERR, "CPU 0x%02x would not start!\n", cpu->path.apic.apic_id); } #if CONFIG_SERIAL_CPU_INIT == 1 @@ -408,7 +408,7 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) active_count = atomic_read(&active_cpus); while(active_count > 1) { if (active_count != old_active_count) { - printk_info("Waiting for %d CPUS to stop\n", active_count - 1); + printk(BIOS_INFO, "Waiting for %d CPUS to stop\n", active_count - 1); old_active_count = active_count; } udelay(10); @@ -419,11 +419,11 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) continue; } if (!cpu->initialized) { - printk_err("CPU 0x%02x did not initialize!\n", + printk(BIOS_ERR, "CPU 0x%02x did not initialize!\n", cpu->path.apic.apic_id); } } - printk_debug("All AP CPUs stopped\n"); + printk(BIOS_DEBUG, "All AP CPUs stopped\n"); } #else /* CONFIG_SMP */ diff --git a/src/cpu/x86/mtrr/mtrr.c b/src/cpu/x86/mtrr/mtrr.c index dab5a0f422..94d7ca7d35 100644 --- a/src/cpu/x86/mtrr/mtrr.c +++ b/src/cpu/x86/mtrr/mtrr.c @@ -98,7 +98,7 @@ static void set_var_mtrr( base.hi = basek >> 22; base.lo = basek << 10; - printk_spew("ADDRESS_MASK_HIGH=%#x\n", address_mask_high); + printk(BIOS_SPEW, "ADDRESS_MASK_HIGH=%#x\n", address_mask_high); if (sizek < 4*1024*1024) { mask.hi = address_mask_high; @@ -236,12 +236,12 @@ static unsigned int range_to_mtrr(unsigned int reg, /* If there's no MTRR hole, this function will bail out * here when called for the hole. */ - printk_spew("Zero-sized MTRR range @%ldKB\n", range_startk); + printk(BIOS_SPEW, "Zero-sized MTRR range @%ldKB\n", range_startk); return reg; } if (reg >= BIOS_MTRRS) { - printk_err("Warning: Out of MTRRs for base: %4ldMB, range: %ldMB, type %s\n", + printk(BIOS_ERR, "Warning: Out of MTRRs for base: %4ldMB, range: %ldMB, type %s\n", range_startk >>10, range_sizek >> 10, (type==MTRR_TYPE_UNCACHEABLE)?"UC": ((type==MTRR_TYPE_WRBACK)?"WB":"Other") ); @@ -258,7 +258,7 @@ static unsigned int range_to_mtrr(unsigned int reg, align = max_align; } sizek = 1 << align; - printk_debug("Setting variable MTRR %d, base: %4ldMB, range: %4ldMB, type %s\n", + printk(BIOS_DEBUG, "Setting variable MTRR %d, base: %4ldMB, range: %4ldMB, type %s\n", reg, range_startk >>10, sizek >> 10, (type==MTRR_TYPE_UNCACHEABLE)?"UC": ((type==MTRR_TYPE_WRBACK)?"WB":"Other") @@ -267,7 +267,7 @@ static unsigned int range_to_mtrr(unsigned int reg, range_startk += sizek; range_sizek -= sizek; if (reg >= BIOS_MTRRS) { - printk_err("Running out of variable MTRRs!\n"); + printk(BIOS_ERR, "Running out of variable MTRRs!\n"); break; } } @@ -295,7 +295,7 @@ static void set_fixed_mtrr_resource(void *gp, struct device *dev, struct resourc if (start_mtrr >= NUM_FIXED_RANGES) { return; } - printk_debug("Setting fixed MTRRs(%d-%d) Type: WB\n", + printk(BIOS_DEBUG, "Setting fixed MTRRs(%d-%d) Type: WB\n", start_mtrr, last_mtrr); set_fixed_mtrrs(start_mtrr, last_mtrr, MTRR_TYPE_WRBACK); @@ -357,7 +357,7 @@ void set_var_mtrr_resource(void *gp, struct device *dev, struct resource *res) #endif } /* Allocate an msr */ - printk_spew(" Allocate an msr - basek = %08lx, sizek = %08lx,\n", basek, sizek); + printk(BIOS_SPEW, " Allocate an msr - basek = %08lx, sizek = %08lx,\n", basek, sizek); state->range_startk = basek; state->range_sizek = sizek; } @@ -369,9 +369,9 @@ void x86_setup_fixed_mtrrs(void) * and clear out the mtrrs. */ - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Initialized the fixed_mtrrs to uncached */ - printk_debug("Setting fixed MTRRs(%d-%d) Type: UC\n", + printk(BIOS_DEBUG, "Setting fixed MTRRs(%d-%d) Type: UC\n", 0, NUM_FIXED_RANGES); set_fixed_mtrrs(0, NUM_FIXED_RANGES, MTRR_TYPE_UNCACHEABLE); @@ -380,10 +380,10 @@ void x86_setup_fixed_mtrrs(void) search_global_resources( IORESOURCE_MEM | IORESOURCE_CACHEABLE, IORESOURCE_MEM | IORESOURCE_CACHEABLE, set_fixed_mtrr_resource, NULL); - printk_debug("DONE fixed MTRRs\n"); + printk(BIOS_DEBUG, "DONE fixed MTRRs\n"); /* enable fixed MTRR */ - printk_spew("call enable_fixed_mtrr()\n"); + printk(BIOS_SPEW, "call enable_fixed_mtrr()\n"); enable_fixed_mtrr(); } @@ -421,7 +421,7 @@ void x86_setup_var_mtrrs(unsigned address_bits) #if (CONFIG_GFXUMA == 1) /* UMA or SP. */ // For now we assume the UMA space is at the end of memory if (var_state.hole_startk || var_state.hole_sizek) { - printk_debug("Warning: Can't set up MTRR hole for UMA due to pre-existing MTRR hole.\n"); + printk(BIOS_DEBUG, "Warning: Can't set up MTRR hole for UMA due to pre-existing MTRR hole.\n"); } else { // Increase the base range and set up UMA as an UC hole instead var_state.range_sizek += (uma_memory_size >> 10); @@ -437,15 +437,15 @@ void x86_setup_var_mtrrs(unsigned address_bits) var_state.reg = range_to_mtrr(var_state.reg, var_state.hole_startk, var_state.hole_sizek, 0, MTRR_TYPE_UNCACHEABLE, var_state.address_bits); #endif - printk_debug("DONE variable MTRRs\n"); - printk_debug("Clear out the extra MTRR's\n"); + printk(BIOS_DEBUG, "DONE variable MTRRs\n"); + printk(BIOS_DEBUG, "Clear out the extra MTRR's\n"); /* Clear out the extra MTRR's */ while(var_state.reg < MTRRS) { set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); } - printk_spew("call enable_var_mtrr()\n"); + printk(BIOS_SPEW, "call enable_var_mtrr()\n"); enable_var_mtrr(); - printk_spew("Leave %s\n", __func__); + printk(BIOS_SPEW, "Leave %s\n", __func__); post_code(0x6A); } @@ -460,24 +460,24 @@ int x86_mtrr_check(void) { /* Only Pentium Pro and later have MTRR */ msr_t msr; - printk_debug("\nMTRR check\n"); + printk(BIOS_DEBUG, "\nMTRR check\n"); msr = rdmsr(0x2ff); msr.lo >>= 10; - printk_debug("Fixed MTRRs : "); + printk(BIOS_DEBUG, "Fixed MTRRs : "); if (msr.lo & 0x01) - printk_debug("Enabled\n"); + printk(BIOS_DEBUG, "Enabled\n"); else - printk_debug("Disabled\n"); + printk(BIOS_DEBUG, "Disabled\n"); - printk_debug("Variable MTRRs: "); + printk(BIOS_DEBUG, "Variable MTRRs: "); if (msr.lo & 0x02) - printk_debug("Enabled\n"); + printk(BIOS_DEBUG, "Enabled\n"); else - printk_debug("Disabled\n"); + printk(BIOS_DEBUG, "Disabled\n"); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); post_code(0x93); return ((int) msr.lo); diff --git a/src/cpu/x86/pae/pgtbl.c b/src/cpu/x86/pae/pgtbl.c index 8919f0e049..4440d7bd8c 100644 --- a/src/cpu/x86/pae/pgtbl.c +++ b/src/cpu/x86/pae/pgtbl.c @@ -66,7 +66,7 @@ void *map_2M_page(unsigned long page) #warning "We may need to increase CONFIG_RAMTOP, it need to be more than (0x100000+20480*CONFIG_MAX_CPUS)\n" #endif if(x_end > (CONFIG_RAMTOP)) { - printk_debug("map_2M_page: Please increase the CONFIG_RAMTOP more than %dK\n", x_end); + printk(BIOS_DEBUG, "map_2M_page: Please increase the CONFIG_RAMTOP more than %dK\n", x_end); die("Can not go on"); } #else diff --git a/src/cpu/x86/smm/smihandler.c b/src/cpu/x86/smm/smihandler.c index 7254d55eab..3dddf6c8ae 100644 --- a/src/cpu/x86/smm/smihandler.c +++ b/src/cpu/x86/smm/smihandler.c @@ -68,7 +68,7 @@ void io_trap_handler(int smif) /* If a handler function handled a given IO trap, it * shall return a non-zero value */ - printk_debug("SMI function trap 0x%x: ", smif); + printk(BIOS_DEBUG, "SMI function trap 0x%x: ", smif); if (southbridge_io_trap_handler(smif)) return; @@ -76,7 +76,7 @@ void io_trap_handler(int smif) if (mainboard_io_trap_handler(smif)) return; - printk_debug("Unknown function\n"); + printk(BIOS_DEBUG, "Unknown function\n"); } /** @@ -111,7 +111,7 @@ void smi_handler(u32 smm_revision) console_init(); - printk_spew("\nSMI# #%d\n", node); + printk(BIOS_SPEW, "\nSMI# #%d\n", node); switch (smm_revision) { case 0x00030002: @@ -131,8 +131,8 @@ void smi_handler(u32 smm_revision) (0xa8000 + 0x7e00 - (node * 0x400)); break; default: - printk_debug("smm_revision: 0x%08x\n", smm_revision); - printk_debug("SMI# not supported on your CPU\n"); + printk(BIOS_DEBUG, "smm_revision: 0x%08x\n", smm_revision); + printk(BIOS_DEBUG, "SMI# not supported on your CPU\n"); /* Don't release lock, so no further SMI will happen, * if we don't handle it anyways. */ diff --git a/src/cpu/x86/tsc/delay_tsc.c b/src/cpu/x86/tsc/delay_tsc.c index 72b1f7196c..4a8fd5287e 100644 --- a/src/cpu/x86/tsc/delay_tsc.c +++ b/src/cpu/x86/tsc/delay_tsc.c @@ -78,7 +78,7 @@ static unsigned long long calibrate_tsc(void) * 32 bits.. */ bad_ctc: - printk_err("bad_ctc\n"); + printk(BIOS_ERR, "bad_ctc\n"); return 0; } @@ -104,7 +104,7 @@ static unsigned long long calibrate_tsc(void) unsigned long long start, end, delta; unsigned long result, count; - printk_spew("Calibrating delay loop...\n"); + printk(BIOS_SPEW, "Calibrating delay loop...\n"); start = rdtscll(); // no udivdi3 because we don't like libgcc. (only in x86emu) // so we count to 1<< 20 and then right shift 20 @@ -128,10 +128,10 @@ static unsigned long long calibrate_tsc(void) delta >>= 20; // save this for microsecond timing. result = delta; - printk_spew("end %llx, start %llx\n", end, start); - printk_spew("32-bit delta %ld\n", (unsigned long) delta); + printk(BIOS_SPEW, "end %llx, start %llx\n", end, start); + printk(BIOS_SPEW, "32-bit delta %ld\n", (unsigned long) delta); - printk_spew("%s 32-bit result is %ld\n", + printk(BIOS_SPEW, "%s 32-bit result is %ld\n", __func__, result); return delta; @@ -144,7 +144,7 @@ void init_timer(void) { if (!clocks_per_usec) { clocks_per_usec = calibrate_tsc(); - printk_info("clocks_per_usec: %lu\n", clocks_per_usec); + printk(BIOS_INFO, "clocks_per_usec: %lu\n", clocks_per_usec); } } diff --git a/src/devices/cardbus_device.c b/src/devices/cardbus_device.c index d6dbbb578b..becdafd42f 100644 --- a/src/devices/cardbus_device.c +++ b/src/devices/cardbus_device.c @@ -166,7 +166,7 @@ void cardbus_enable_resources(device_t dev) PCI_BRIDGE_CTL_MASTER_ABORT | PCI_BRIDGE_CTL_BUS_RESET)); ctrl |= (PCI_CB_BRIDGE_CTL_PARITY + PCI_CB_BRIDGE_CTL_SERR); /* error check */ - printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); + printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); pci_dev_enable_resources(dev); @@ -188,7 +188,7 @@ unsigned int cardbus_scan_bridge(device_t dev, unsigned int max) uint32_t buses; uint16_t cr; - printk_spew("%s for %s\n", __func__, dev_path(dev)); + printk(BIOS_SPEW, "%s for %s\n", __func__, dev_path(dev)); bus = &dev->link[0]; bus->dev = dev; @@ -236,7 +236,7 @@ unsigned int cardbus_scan_bridge(device_t dev, unsigned int max) pci_write_config32(dev, PCI_CB_PRIMARY_BUS, buses); pci_write_config16(dev, PCI_COMMAND, cr); - printk_spew("%s returns max %d\n", __func__, max); + printk(BIOS_SPEW, "%s returns max %d\n", __func__, max); return max; } diff --git a/src/devices/device.c b/src/devices/device.c index c337294c1f..c9788211cd 100644 --- a/src/devices/device.c +++ b/src/devices/device.c @@ -129,7 +129,7 @@ static void read_resources(struct bus *bus) { struct device *curdev; - printk_spew("%s %s bus %x link: %d\n", dev_path(bus->dev), __func__, + printk(BIOS_SPEW, "%s %s bus %x link: %d\n", dev_path(bus->dev), __func__, bus->secondary, bus->link); /* Walk through all devices and find which resources they need. */ @@ -139,7 +139,7 @@ static void read_resources(struct bus *bus) continue; } if (!curdev->ops || !curdev->ops->read_resources) { - printk_err("%s missing read_resources\n", + printk(BIOS_ERR, "%s missing read_resources\n", dev_path(curdev)); continue; } @@ -149,7 +149,7 @@ static void read_resources(struct bus *bus) for (i = 0; i < curdev->links; i++) read_resources(&curdev->link[i]); } - printk_spew("%s read_resources bus %d link: %d done\n", + printk(BIOS_SPEW, "%s read_resources bus %d link: %d done\n", dev_path(bus->dev), bus->secondary, bus->link); } @@ -245,7 +245,7 @@ static void compute_resources(struct bus *bus, struct resource *bridge, resource_t base; base = round(bridge->base, bridge->align); - printk_spew( "%s %s_%s: base: %llx size: %llx align: %d gran: %d limit: %llx\n", + printk(BIOS_SPEW, "%s %s_%s: base: %llx size: %llx align: %d gran: %d limit: %llx\n", dev_path(bus->dev), __func__, (type & IORESOURCE_IO) ? "io" : (type & IORESOURCE_PREFETCH) ? "prefmem" : "mem", @@ -309,8 +309,8 @@ static void compute_resources(struct bus *bus, struct resource *bridge, /* Warn if it looks like APICs aren't declared. */ if ((resource->limit == 0xffffffff) && (resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("Resource limit looks wrong! (no APIC?)\n"); - printk_err("%s %02lx limit %08Lx\n", dev_path(dev), + printk(BIOS_ERR, "Resource limit looks wrong! (no APIC?)\n"); + printk(BIOS_ERR, "%s %02lx limit %08Lx\n", dev_path(dev), resource->index, resource->limit); } @@ -336,7 +336,7 @@ static void compute_resources(struct bus *bus, struct resource *bridge, resource->base = base; base += resource->size; - printk_spew("%s %02lx * [0x%llx - 0x%llx] %s\n", + printk(BIOS_SPEW, "%s %02lx * [0x%llx - 0x%llx] %s\n", dev_path(dev), resource->index, resource->base, resource->base + resource->size - 1, @@ -353,7 +353,7 @@ static void compute_resources(struct bus *bus, struct resource *bridge, bridge->size = round(base, bridge->gran) - round(bridge->base, bridge->align); - printk_spew("%s %s_%s: base: %llx size: %llx align: %d gran: %d limit: %llx done\n", + printk(BIOS_SPEW, "%s %s_%s: base: %llx size: %llx align: %d gran: %d limit: %llx done\n", dev_path(bus->dev), __func__, (bridge->flags & IORESOURCE_IO) ? "io" : (bridge->flags & IORESOURCE_PREFETCH) ? "prefmem" : "mem", @@ -402,7 +402,7 @@ static void allocate_resources(struct bus *bus, struct resource *bridge, resource_t base; base = bridge->base; - printk_spew("%s %s_%s: base:%llx size:%llx align:%d gran:%d limit:%llx\n", + printk(BIOS_SPEW, "%s %s_%s: base:%llx size:%llx align:%d gran:%d limit:%llx\n", dev_path(bus->dev), __func__, (type & IORESOURCE_IO) ? "io" : (type & IORESOURCE_PREFETCH) ? "prefmem" : "mem", @@ -456,14 +456,14 @@ static void allocate_resources(struct bus *bus, struct resource *bridge, resource->flags &= ~IORESOURCE_STORED; base += resource->size; } else { - printk_err("!! Resource didn't fit !!\n"); - printk_err(" aligned base %llx size %llx limit %llx\n", + printk(BIOS_ERR, "!! Resource didn't fit !!\n"); + printk(BIOS_ERR, " aligned base %llx size %llx limit %llx\n", round(base, resource->align), resource->size, resource->limit); - printk_err(" %llx needs to be <= %llx (limit)\n", + printk(BIOS_ERR, " %llx needs to be <= %llx (limit)\n", (round(base, resource->align) + resource->size) - 1, resource->limit); - printk_err(" %s%s %02lx * [0x%llx - 0x%llx] %s\n", + printk(BIOS_ERR, " %s%s %02lx * [0x%llx - 0x%llx] %s\n", (resource-> flags & IORESOURCE_ASSIGNED) ? "Assigned: " : "", dev_path(dev), resource->index, @@ -476,7 +476,7 @@ static void allocate_resources(struct bus *bus, struct resource *bridge, ? "prefmem" : "mem"); } - printk_spew("%s%s %02lx * [0x%llx - 0x%llx] %s\n", + printk(BIOS_SPEW, "%s%s %02lx * [0x%llx - 0x%llx] %s\n", (resource->flags & IORESOURCE_ASSIGNED) ? "Assigned: " : "", dev_path(dev), resource->index, resource->base, @@ -494,7 +494,7 @@ static void allocate_resources(struct bus *bus, struct resource *bridge, bridge->flags |= IORESOURCE_ASSIGNED; - printk_spew("%s %s_%s: next_base: %llx size: %llx align: %d gran: %d done\n", + printk(BIOS_SPEW, "%s %s_%s: next_base: %llx size: %llx align: %d gran: %d done\n", dev_path(bus->dev), __func__, (type & IORESOURCE_IO) ? "io" : (type & IORESOURCE_PREFETCH) ? "prefmem" : "mem", @@ -553,7 +553,7 @@ static void constrain_resources(struct device *dev, struct constraints* limits) struct resource *lim; int i; - printk_spew("%s: %s\n", __func__, dev_path(dev)); + printk(BIOS_SPEW, "%s: %s\n", __func__, dev_path(dev)); /* Constrain limits based on the fixed resources of this device. */ for (i = 0; i < dev->resources; i++) { @@ -562,7 +562,7 @@ static void constrain_resources(struct device *dev, struct constraints* limits) continue; if (!res->size) { /* It makes no sense to have 0-sized, fixed resources.*/ - printk_err("skipping %s@%lx fixed resource, size=0!\n", + printk(BIOS_ERR, "skipping %s@%lx fixed resource, size=0!\n", dev_path(dev), res->index); continue; } @@ -606,7 +606,7 @@ static void avoid_fixed_resources(struct device *dev) struct resource *res; int i; - printk_spew("%s: %s\n", __func__, dev_path(dev)); + printk(BIOS_SPEW, "%s: %s\n", __func__, dev_path(dev)); /* Initialize constraints to maximum size. */ limits.pref.base = 0; @@ -621,7 +621,7 @@ static void avoid_fixed_resources(struct device *dev) res = &dev->resource[i]; if ((res->flags & IORESOURCE_FIXED)) continue; - printk_spew("%s:@%s %02lx limit %08Lx\n", __func__, + printk(BIOS_SPEW, "%s:@%s %02lx limit %08Lx\n", __func__, dev_path(dev), res->index, res->limit); if ((res->flags & MEM_MASK) == PREF_TYPE && (res->limit < limits.pref.limit)) @@ -655,9 +655,9 @@ static void avoid_fixed_resources(struct device *dev) else continue; - printk_spew("%s2: %s@%02lx limit %08Lx\n", __func__, + printk(BIOS_SPEW, "%s2: %s@%02lx limit %08Lx\n", __func__, dev_path(dev), res->index, res->limit); - printk_spew("\tlim->base %08Lx lim->limit %08Lx\n", + printk(BIOS_SPEW, "\tlim->base %08Lx lim->limit %08Lx\n", lim->base, lim->limit); /* Is the resource outside the limits? */ @@ -726,7 +726,7 @@ static void set_vga_bridge_bits(void) if (vga) { /* VGA is first add on card or the only onboard VGA. */ - printk_debug("Setting up VGA for %s\n", dev_path(vga)); + printk(BIOS_DEBUG, "Setting up VGA for %s\n", dev_path(vga)); /* All legacy VGA cards have MEM & I/O space registers. */ vga->command |= (PCI_COMMAND_MEMORY | PCI_COMMAND_IO); vga_pri = vga; @@ -734,7 +734,7 @@ static void set_vga_bridge_bits(void) } /* Now walk up the bridges setting the VGA enable. */ while (bus) { - printk_debug("Setting PCI_BRIDGE_CTL_VGA for bridge %s\n", + printk(BIOS_DEBUG, "Setting PCI_BRIDGE_CTL_VGA for bridge %s\n", dev_path(bus->dev)); bus->bridge_ctrl |= PCI_BRIDGE_CTL_VGA; bus = (bus == bus->dev->bus) ? 0 : bus->dev->bus; @@ -760,7 +760,7 @@ void assign_resources(struct bus *bus) { struct device *curdev; - printk_spew("%s assign_resources, bus %d link: %d\n", + printk(BIOS_SPEW, "%s assign_resources, bus %d link: %d\n", dev_path(bus->dev), bus->secondary, bus->link); for (curdev = bus->children; curdev; curdev = curdev->sibling) { @@ -768,13 +768,13 @@ void assign_resources(struct bus *bus) continue; } if (!curdev->ops || !curdev->ops->set_resources) { - printk_err("%s missing set_resources\n", + printk(BIOS_ERR, "%s missing set_resources\n", dev_path(curdev)); continue; } curdev->ops->set_resources(curdev); } - printk_spew("%s assign_resources, bus %d link: %d\n", + printk(BIOS_SPEW, "%s assign_resources, bus %d link: %d\n", dev_path(bus->dev), bus->secondary, bus->link); } @@ -802,7 +802,7 @@ void enable_resources(struct device *dev) return; } if (!dev->ops || !dev->ops->enable_resources) { - printk_err("%s missing enable_resources\n", dev_path(dev)); + printk(BIOS_ERR, "%s missing enable_resources\n", dev_path(dev)); return; } dev->ops->enable_resources(dev); @@ -891,22 +891,22 @@ unsigned int scan_bus(struct device *busdev, unsigned int max) void dev_enumerate(void) { struct device *root; - printk_info("Enumerating buses...\n"); + printk(BIOS_INFO, "Enumerating buses...\n"); root = &dev_root; show_all_devs(BIOS_SPEW, "Before Device Enumeration."); - printk_spew("Compare with tree...\n"); + printk(BIOS_SPEW, "Compare with tree...\n"); show_devs_tree(root, BIOS_SPEW, 0, 0); if (root->chip_ops && root->chip_ops->enable_dev) { root->chip_ops->enable_dev(root); } if (!root->ops || !root->ops->scan_bus) { - printk_err("dev_root missing scan_bus operation"); + printk(BIOS_ERR, "dev_root missing scan_bus operation"); return; } scan_bus(root, 0); - printk_info("done\n"); + printk(BIOS_INFO, "done\n"); } /** @@ -933,7 +933,7 @@ void dev_configure(void) set_vga_bridge_bits(); #endif - printk_info("Allocating resources...\n"); + printk(BIOS_INFO, "Allocating resources...\n"); root = &dev_root; @@ -944,9 +944,9 @@ void dev_configure(void) /* Read the resources for the entire tree. */ - printk_info("Reading resources...\n"); + printk(BIOS_INFO, "Reading resources...\n"); read_resources(&root->link[0]); - printk_info("Done reading resources.\n"); + printk(BIOS_INFO, "Done reading resources.\n"); print_resource_tree(root, BIOS_SPEW, "After reading."); @@ -997,7 +997,7 @@ void dev_configure(void) } /* Store the computed resource allocations into device registers ... */ - printk_info("Setting resources...\n"); + printk(BIOS_INFO, "Setting resources...\n"); for (child = root->link[0].children; child; child = child->sibling) { if (!(child->path.type == DEVICE_PATH_PCI_DOMAIN)) continue; @@ -1023,10 +1023,10 @@ void dev_configure(void) } } assign_resources(&root->link[0]); - printk_info("Done setting resources.\n"); + printk(BIOS_INFO, "Done setting resources.\n"); print_resource_tree(root, BIOS_SPEW, "After assigning values."); - printk_info("Done allocating resources.\n"); + printk(BIOS_INFO, "Done allocating resources.\n"); } /** @@ -1037,12 +1037,12 @@ void dev_configure(void) */ void dev_enable(void) { - printk_info("Enabling resources...\n"); + printk(BIOS_INFO, "Enabling resources...\n"); /* now enable everything. */ enable_resources(&dev_root); - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); } /** @@ -1056,20 +1056,20 @@ void dev_initialize(void) { struct device *dev; - printk_info("Initializing devices...\n"); + printk(BIOS_INFO, "Initializing devices...\n"); for (dev = all_devices; dev; dev = dev->next) { if (dev->enabled && !dev->initialized && dev->ops && dev->ops->init) { if (dev->path.type == DEVICE_PATH_I2C) { - printk_debug("smbus: %s[%d]->", + printk(BIOS_DEBUG, "smbus: %s[%d]->", dev_path(dev->bus->dev), dev->bus->link); } - printk_debug("%s init\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s init\n", dev_path(dev)); dev->initialized = 1; dev->ops->init(dev); } } - printk_info("Devices initialized\n"); + printk(BIOS_INFO, "Devices initialized\n"); show_all_devs(BIOS_SPEW, "After init."); } diff --git a/src/devices/device_util.c b/src/devices/device_util.c index a730556593..e44a02e428 100644 --- a/src/devices/device_util.c +++ b/src/devices/device_util.c @@ -203,7 +203,7 @@ const char *dev_path(device_t dev) sprintf(buffer, "CPU_BUS: %02x", dev->path.cpu_bus.id); break; default: - printk_err("Unknown device path type: %d\n", dev->path.type); + printk(BIOS_ERR, "Unknown device path type: %d\n", dev->path.type); break; } } @@ -253,7 +253,7 @@ int path_eq(struct device_path *path1, struct device_path *path2) equal = (path1->cpu_bus.id == path2->cpu_bus.id); break; default: - printk_err("Uknown device type: %d\n", path1->type); + printk(BIOS_ERR, "Uknown device type: %d\n", path1->type); break; } } @@ -355,7 +355,7 @@ struct resource *find_resource(device_t dev, unsigned index) /* See if there is a resource with the appropriate index */ resource = probe_resource(dev, index); if (!resource) { - printk_emerg("%s missing resource: %02x\n", + printk(BIOS_EMERG, "%s missing resource: %02x\n", dev_path(dev), index); die(""); } @@ -468,7 +468,7 @@ void report_resource_stored(device_t dev, struct resource *resource, const char sprintf(buf, "bus %02x ", dev->link[0].secondary); #endif } - printk_debug( + printk(BIOS_DEBUG, "%s %02lx <- [0x%010Lx - 0x%010Lx] size 0x%08Lx gran 0x%02x %s%s%s\n", dev_path(dev), resource->index, diff --git a/src/devices/hypertransport.c b/src/devices/hypertransport.c index f5ac1a6c27..bb91249908 100644 --- a/src/devices/hypertransport.c +++ b/src/devices/hypertransport.c @@ -192,11 +192,11 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) unsigned new_freq; pci_write_config8(cur->dev, cur->pos + cur->freq_off, freq); reset_needed = 1; - printk_spew("HyperT FreqP old %x new %x\n",old_freq,freq); + printk(BIOS_SPEW, "HyperT FreqP old %x new %x\n",old_freq,freq); new_freq = pci_read_config8(cur->dev, cur->pos + cur->freq_off); new_freq &= 0x0f; if (new_freq != freq) { - printk_err("%s Hypertransport frequency would not set wanted: %x got: %x\n", + printk(BIOS_ERR, "%s Hypertransport frequency would not set wanted: %x got: %x\n", dev_path(dev), freq, new_freq); } } @@ -206,10 +206,10 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) pci_write_config8(cur->dev, cur->pos + cur->config_off + 1, present_width); reset_needed = 1; - printk_spew("HyperT widthP old %x new %x\n",old_width, present_width); + printk(BIOS_SPEW, "HyperT widthP old %x new %x\n",old_width, present_width); new_width = pci_read_config8(cur->dev, cur->pos + cur->config_off + 1); if (new_width != present_width) { - printk_err("%s Hypertransport width would not set wanted: %x got: %x\n", + printk(BIOS_ERR, "%s Hypertransport width would not set wanted: %x got: %x\n", dev_path(dev), present_width, new_width); } } @@ -221,11 +221,11 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) unsigned new_freq; pci_write_config8(prev->dev, prev->pos + prev->freq_off, freq); reset_needed = 1; - printk_spew("HyperT freqU old %x new %x\n", old_freq, freq); + printk(BIOS_SPEW, "HyperT freqU old %x new %x\n", old_freq, freq); new_freq = pci_read_config8(prev->dev, prev->pos + prev->freq_off); new_freq &= 0x0f; if (new_freq != freq) { - printk_err("%s Hypertransport frequency would not set wanted: %x got: %x\n", + printk(BIOS_ERR, "%s Hypertransport frequency would not set wanted: %x got: %x\n", dev_path(prev->dev), freq, new_freq); } } @@ -234,10 +234,10 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) unsigned new_width; pci_write_config8(prev->dev, prev->pos + prev->config_off + 1, upstream_width); reset_needed = 1; - printk_spew("HyperT widthU old %x new %x\n", old_width, upstream_width); + printk(BIOS_SPEW, "HyperT widthU old %x new %x\n", old_width, upstream_width); new_width = pci_read_config8(prev->dev, prev->pos + prev->config_off + 1); if (new_width != upstream_width) { - printk_err("%s Hypertransport width would not set wanted: %x got: %x\n", + printk(BIOS_ERR, "%s Hypertransport width would not set wanted: %x got: %x\n", dev_path(prev->dev), upstream_width, new_width); } } @@ -273,7 +273,7 @@ static unsigned ht_lookup_slave_capability(struct device *dev) if (pos) { unsigned flags; flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); - printk_spew("flags: 0x%04x\n", flags); + printk(BIOS_SPEW, "flags: 0x%04x\n", flags); if ((flags >> 13) == 0) { /* Entry is a Slave secondary, success... */ break; @@ -317,7 +317,7 @@ static void ht_collapse_early_enumeration(struct bus *bus, unsigned offset_uniti pci_write_config16(prev.dev, prev.pos + prev.ctrl_off, ctrl); ctrl = pci_read_config16(prev.dev, prev.pos + prev.ctrl_off); if (ctrl & ((1 << 4) | (1 << 8))) { - printk_alert("Detected error on Hypertransport Link\n"); + printk(BIOS_ALERT, "Detected error on Hypertransport Link\n"); return; } } @@ -371,7 +371,7 @@ static void ht_collapse_early_enumeration(struct bus *bus, unsigned offset_uniti flags = pci_read_config16(&dummy, pos + PCI_CAP_FLAGS); flags &= ~0x1f; pci_write_config16(&dummy, pos + PCI_CAP_FLAGS, flags); - printk_spew("Collapsing %s [%04x/%04x]\n", + printk(BIOS_SPEW, "Collapsing %s [%04x/%04x]\n", dev_path(&dummy), dummy.vendor, dummy.device); } } @@ -441,7 +441,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, pci_write_config16(prev.dev, prev.pos + prev.ctrl_off, ctrl); ctrl = pci_read_config16(prev.dev, prev.pos + prev.ctrl_off); if (ctrl & ((1 << 4) | (1 << 8))) { - printk_alert("Detected error on Hypertransport Link\n"); + printk(BIOS_ALERT, "Detected error on Hypertransport Link\n"); goto end_of_chain; } } @@ -462,7 +462,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, /* Find the hypertransport link capability */ pos = ht_lookup_slave_capability(dev); if (pos == 0) { - printk_err("%s Hypertransport link capability not found", + printk(BIOS_ERR, "%s Hypertransport link capability not found", dev_path(dev)); break; } @@ -507,7 +507,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, last_func = func; } /* Compute the number of unitids consumed */ - printk_spew("%s count: %04x static_count: %04x\n", + printk(BIOS_SPEW, "%s count: %04x static_count: %04x\n", dev_path(dev), count, static_count); if (count < static_count) { count = static_count; @@ -532,7 +532,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, /* Setup the hypetransport link */ bus->reset_needed |= ht_setup_link(&prev, dev, pos); - printk_debug("%s [%04x/%04x] %s next_unitid: %04x\n", + printk(BIOS_DEBUG, "%s [%04x/%04x] %s next_unitid: %04x\n", dev_path(dev), dev->vendor, dev->device, (dev->enabled? "enabled": "disabled"), next_unitid); @@ -541,10 +541,10 @@ unsigned int hypertransport_scan_chain(struct bus *bus, end_of_chain: #if OPT_HT_LINK == 1 if(bus->reset_needed) { - printk_info("HyperT reset needed\n"); + printk(BIOS_INFO, "HyperT reset needed\n"); } else { - printk_debug("HyperT reset not needed\n"); + printk(BIOS_DEBUG, "HyperT reset not needed\n"); } #endif @@ -563,7 +563,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, ht_unitid_base[ht_dev_num-1] = CONFIG_HT_CHAIN_END_UNITID_BASE; // update last one - printk_debug(" unitid: %04x --> %04x\n", + printk(BIOS_DEBUG, " unitid: %04x --> %04x\n", real_last_unitid, CONFIG_HT_CHAIN_END_UNITID_BASE); } @@ -583,9 +583,9 @@ unsigned int hypertransport_scan_chain(struct bus *bus, if(old_devices) { device_t left; for(left = old_devices; left; left = left->sibling) { - printk_debug("%s\n", dev_path(left)); + printk(BIOS_DEBUG, "%s\n", dev_path(left)); } - printk_err("HT: Left over static devices. Check your Config.lb\n"); + printk(BIOS_ERR, "HT: Left over static devices. Check your Config.lb\n"); if(last_func && !last_func->sibling) // put back the left over static device, and let pci_scan_bus disable it last_func->sibling = old_devices; } diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index b5088c1080..fbe8b335af 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -136,7 +136,7 @@ unsigned pci_find_next_capability(struct device *dev, unsigned cap, int this_cap; pos &= ~3; this_cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID); - printk_spew("Capability: type 0x%02x @ 0x%02x\n", this_cap, + printk(BIOS_SPEW, "Capability: type 0x%02x @ 0x%02x\n", this_cap, pos); if (this_cap == 0xff) { break; @@ -226,8 +226,7 @@ struct resource *pci_get_resource(struct device *dev, unsigned long index) */ if (moving == 0) { if (value != 0) { - printk_debug - ("%s register %02lx(%08lx), read-only ignoring it\n", + printk(BIOS_DEBUG, "%s register %02lx(%08lx), read-only ignoring it\n", dev_path(dev), index, value); } resource->flags = 0; @@ -257,8 +256,8 @@ struct resource *pci_get_resource(struct device *dev, unsigned long index) resource->flags |= IORESOURCE_PCI64; } else { /* Invalid value. */ - printk_err("Broken BAR with value %lx\n", attr); - printk_err(" on dev %s at index %02lx\n", + printk(BIOS_ERR, "Broken BAR with value %lx\n", attr); + printk(BIOS_ERR, " on dev %s at index %02lx\n", dev_path(dev), index); resource->flags = 0; } @@ -313,8 +312,7 @@ static void pci_get_rom_resource(struct device *dev, unsigned long index) resource->flags |= IORESOURCE_MEM | IORESOURCE_READONLY; } else { if (value != 0) { - printk_debug - ("%s register %02lx(%08lx), read-only ignoring it\n", + printk(BIOS_DEBUG, "%s register %02lx(%08lx), read-only ignoring it\n", dev_path(dev), index, value); } resource->flags = 0; @@ -454,7 +452,7 @@ static void pci_set_resource(struct device *dev, struct resource *resource) /* Make certain the resource has actually been assigned a value. */ if (!(resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("ERROR: %s %02lx %s size: 0x%010llx not assigned\n", + printk(BIOS_ERR, "ERROR: %s %02lx %s size: 0x%010llx not assigned\n", dev_path(dev), resource->index, resource_type(resource), resource->size); return; @@ -543,7 +541,7 @@ static void pci_set_resource(struct device *dev, struct resource *resource) } else { /* Don't let me think I stored the resource. */ resource->flags &= ~IORESOURCE_STORED; - printk_err("ERROR: invalid resource->index %lx\n", + printk(BIOS_ERR, "ERROR: invalid resource->index %lx\n", resource->index); } report_resource_stored(dev, resource, ""); @@ -594,7 +592,7 @@ void pci_dev_enable_resources(struct device *dev) /* Set the subsystem vendor and device id for mainboard devices. */ ops = ops_pci(dev); if (dev->on_mainboard && ops && ops->set_subsystem) { - printk_debug("%s subsystem <- %02x/%02x\n", + printk(BIOS_DEBUG, "%s subsystem <- %02x/%02x\n", dev_path(dev), CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID, CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID); @@ -607,7 +605,7 @@ void pci_dev_enable_resources(struct device *dev) /* v3 has * command |= (PCI_COMMAND_PARITY + PCI_COMMAND_SERR); // Error check. */ - printk_debug("%s cmd <- %02x\n", dev_path(dev), command); + printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command); pci_write_config16(dev, PCI_COMMAND, command); } @@ -623,7 +621,7 @@ void pci_bus_enable_resources(struct device *dev) ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); ctrl |= dev->link[0].bridge_ctrl; ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* Error check. */ - printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); + printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); pci_dev_enable_resources(dev); @@ -731,7 +729,7 @@ static struct device_operations *get_pci_bridge_ops(device_t dev) #if CONFIG_PCIX_PLUGIN_SUPPORT == 1 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (pos) { - printk_debug("%s subordinate bus PCI-X\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s subordinate bus PCI-X\n", dev_path(dev)); return &default_pcix_ops_bus; } #endif @@ -745,7 +743,7 @@ static struct device_operations *get_pci_bridge_ops(device_t dev) flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); if ((flags >> 13) == 1) { /* Host or Secondary Interface */ - printk_debug("%s subordinate bus Hypertransport\n", + printk(BIOS_DEBUG, "%s subordinate bus Hypertransport\n", dev_path(dev)); return &default_ht_ops_bus; } @@ -760,11 +758,11 @@ static struct device_operations *get_pci_bridge_ops(device_t dev) case PCI_EXP_TYPE_ROOT_PORT: case PCI_EXP_TYPE_UPSTREAM: case PCI_EXP_TYPE_DOWNSTREAM: - printk_debug("%s subordinate bus PCI Express\n", + printk(BIOS_DEBUG, "%s subordinate bus PCI Express\n", dev_path(dev)); return &default_pciexp_ops_bus; case PCI_EXP_TYPE_PCI_BRIDGE: - printk_debug("%s subordinate PCI\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s subordinate PCI\n", dev_path(dev)); return &default_pci_ops_bus; default: break; @@ -795,7 +793,7 @@ static void set_pci_ops(struct device *dev) if ((driver->vendor == dev->vendor) && (driver->device == dev->device)) { dev->ops = (struct device_operations *)driver->ops; - printk_spew("%s [%04x/%04x] %sops\n", + printk(BIOS_SPEW, "%s [%04x/%04x] %sops\n", dev_path(dev), driver->vendor, driver->device, (driver->ops->scan_bus ? "bus " : "")); @@ -823,7 +821,7 @@ static void set_pci_ops(struct device *dev) default: bad: if (dev->enabled) { - printk_err("%s [%04x/%04x/%06x] has unknown header " + printk(BIOS_ERR, "%s [%04x/%04x/%06x] has unknown header " "type %02x, ignoring.\n", dev_path(dev), dev->vendor, dev->device, @@ -852,7 +850,7 @@ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn) dev = 0; for (; *list; list = &(*list)->sibling) { if ((*list)->path.type != DEVICE_PATH_PCI) { - printk_err("child %s not a pci device\n", + printk(BIOS_ERR, "child %s not a pci device\n", dev_path(*list)); continue; } @@ -916,7 +914,7 @@ device_t pci_probe_dev(device_t dev, struct bus * bus, unsigned devfn) */ if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { - printk_spew("%s, bad id 0x%x\n", dev_path(&dummy), id); + printk(BIOS_SPEW, "%s, bad id 0x%x\n", dev_path(&dummy), id); return NULL; } dev = alloc_dev(bus, &dummy.path); @@ -947,7 +945,7 @@ device_t pci_probe_dev(device_t dev, struct bus * bus, unsigned devfn) if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { if (dev->enabled) { - printk_info("PCI: Static device %s not found, disabling it.\n", + printk(BIOS_INFO, "PCI: Static device %s not found, disabling it.\n", dev_path(dev)); dev->enabled = 0; } @@ -982,7 +980,7 @@ device_t pci_probe_dev(device_t dev, struct bus * bus, unsigned devfn) } /* Display the device. */ - printk_debug("%s [%04x/%04x] %s%s\n", + printk(BIOS_DEBUG, "%s [%04x/%04x] %s%s\n", dev_path(dev), dev->vendor, dev->device, dev->enabled ? "enabled" : "disabled", @@ -1016,10 +1014,10 @@ unsigned int pci_scan_bus(struct bus *bus, struct device *child; #if CONFIG_PCI_BUS_SEGN_BITS - printk_debug("PCI: pci_scan_bus for bus %04x:%02x\n", + printk(BIOS_DEBUG, "PCI: pci_scan_bus for bus %04x:%02x\n", bus->secondary >> 8, bus->secondary & 0xff); #else - printk_debug("PCI: pci_scan_bus for bus %02x\n", bus->secondary); + printk(BIOS_DEBUG, "PCI: pci_scan_bus for bus %02x\n", bus->secondary); #endif old_devices = bus->children; @@ -1055,11 +1053,11 @@ unsigned int pci_scan_bus(struct bus *bus, */ if (old_devices) { device_t left; - printk_warning("PCI: Left over static devices:\n"); + printk(BIOS_WARNING, "PCI: Left over static devices:\n"); for (left = old_devices; left; left = left->sibling) { - printk_warning("%s\n", dev_path(left)); + printk(BIOS_WARNING, "%s\n", dev_path(left)); } - printk_warning("PCI: Check your mainboard Config.lb.\n"); + printk(BIOS_WARNING, "PCI: Check your mainboard Config.lb.\n"); } /* For all children that implement scan_bus() (i.e. bridges) @@ -1073,7 +1071,7 @@ unsigned int pci_scan_bus(struct bus *bus, * side of any bridges that may be on this bus plus any devices. * Return how far we've got finding sub-buses. */ - printk_debug("PCI: pci_scan_bus returning with max=%03x\n", max); + printk(BIOS_DEBUG, "PCI: pci_scan_bus returning with max=%03x\n", max); post_code(0x55); return max; } @@ -1100,7 +1098,7 @@ unsigned int do_pci_scan_bridge(struct device *dev, unsigned int max, u32 buses; u16 cr; - printk_spew("%s for %s\n", __func__, dev_path(dev)); + printk(BIOS_SPEW, "%s for %s\n", __func__, dev_path(dev)); bus = &dev->link[0]; bus->dev = dev; @@ -1146,7 +1144,7 @@ unsigned int do_pci_scan_bridge(struct device *dev, unsigned int max, pci_write_config32(dev, PCI_PRIMARY_BUS, buses); pci_write_config16(dev, PCI_COMMAND, cr); - printk_spew("%s returns max %d\n", __func__, max); + printk(BIOS_SPEW, "%s returns max %d\n", __func__, max); return max; } @@ -1224,7 +1222,7 @@ void pci_assign_irqs(unsigned bus, unsigned slot, irq = pIntAtoD[line - 1]; - printk_debug("Assigning IRQ %d to %d:%x.%d\n", + printk(BIOS_DEBUG, "Assigning IRQ %d to %d:%x.%d\n", irq, bus, slot, funct); pci_write_config8(pdev, PCI_INTERRUPT_LINE, @@ -1232,7 +1230,7 @@ void pci_assign_irqs(unsigned bus, unsigned slot, #ifdef PARANOID_IRQ_ASSIGNMENTS irq = pci_read_config8(pdev, PCI_INTERRUPT_LINE); - printk_debug(" Readback = %d\n", irq); + printk(BIOS_DEBUG, " Readback = %d\n", irq); #endif // Change to level triggered diff --git a/src/devices/pci_ops.c b/src/devices/pci_ops.c index 6ade5e0c3c..60ed1ca280 100644 --- a/src/devices/pci_ops.c +++ b/src/devices/pci_ops.c @@ -39,7 +39,7 @@ static struct bus *get_pbus(device_t dev) while(pbus && pbus->dev && !ops_pci_bus(pbus)) { if (pbus == pbus->dev->bus) { - printk_alert("%s in endless loop looking for a parent " + printk(BIOS_ALERT, "%s in endless loop looking for a parent " "bus with ops_pci_bus for %s, breaking out.\n", __func__, dev_path(dev)); break; @@ -48,7 +48,7 @@ static struct bus *get_pbus(device_t dev) } if (!pbus || !pbus->dev || !pbus->dev->ops || !pbus->dev->ops->ops_pci_bus) { /* This can happen before the device tree is set up completely. */ - //printk_emerg("%s: Cannot find pci bus operations.\n", dev_path(dev)); + //printk(BIOS_EMERG, "%s: Cannot find pci bus operations.\n", dev_path(dev)); pbus = NULL; } return pbus; diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c index c4af19143b..0ed347b4e7 100644 --- a/src/devices/pci_rom.c +++ b/src/devices/pci_rom.c @@ -38,7 +38,7 @@ struct rom_header * pci_rom_probe(struct device *dev) rom_header = cbfs_load_optionrom(dev->vendor, dev->device, NULL); if (rom_header) { - printk_debug("In cbfs, rom address for %s = %p\n", + printk(BIOS_DEBUG, "In cbfs, rom address for %s = %p\n", dev_path(dev), rom_header); } else { unsigned long rom_address; @@ -59,35 +59,35 @@ struct rom_header * pci_rom_probe(struct device *dev) rom_address|PCI_ROM_ADDRESS_ENABLE); } - printk_debug("On card, rom address for %s = %lx\n", + printk(BIOS_DEBUG, "On card, rom address for %s = %lx\n", dev_path(dev), rom_address); rom_header = (struct rom_header *)rom_address; } - printk_spew("PCI Expansion ROM, signature 0x%04x, INIT size 0x%04x, data ptr 0x%04x\n", + printk(BIOS_SPEW, "PCI Expansion ROM, signature 0x%04x, INIT size 0x%04x, data ptr 0x%04x\n", le32_to_cpu(rom_header->signature), rom_header->size * 512, le32_to_cpu(rom_header->data)); if (le32_to_cpu(rom_header->signature) != PCI_ROM_HDR) { - printk_err("Incorrect Expansion ROM Header Signature %04x\n", + printk(BIOS_ERR, "Incorrect Expansion ROM Header Signature %04x\n", le32_to_cpu(rom_header->signature)); return NULL; } rom_data = (((void *)rom_header) + le32_to_cpu(rom_header->data)); - printk_spew("PCI ROM Image, Vendor %04x, Device %04x,\n", + printk(BIOS_SPEW, "PCI ROM Image, Vendor %04x, Device %04x,\n", rom_data->vendor, rom_data->device); if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) { - printk_err("ID mismatch: Vendor ID %04x, Device ID %04x\n", + printk(BIOS_ERR, "ID mismatch: Vendor ID %04x, Device ID %04x\n", rom_data->vendor, rom_data->device); return NULL; } - printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n", + printk(BIOS_SPEW, "PCI ROM Image, Class Code %04x%02x, Code Type %02x\n", rom_data->class_hi, rom_data->class_lo, rom_data->type); if (dev->class != ((rom_data->class_hi << 8) | rom_data->class_lo)) { - printk_debug("Class Code mismatch ROM %08x, dev %08x\n", + printk(BIOS_DEBUG, "Class Code mismatch ROM %08x, dev %08x\n", (rom_data->class_hi << 8) | rom_data->class_lo, dev->class); //return NULL; @@ -124,14 +124,14 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade if (dev != vga_pri) return NULL; // only one VGA supported #endif if ((void *)PCI_VGA_RAM_IMAGE_START != rom_header) { - printk_debug("copying VGA ROM Image from %p to 0x%x, 0x%x bytes\n", + printk(BIOS_DEBUG, "copying VGA ROM Image from %p to 0x%x, 0x%x bytes\n", rom_header, PCI_VGA_RAM_IMAGE_START, rom_size); memcpy((void *)PCI_VGA_RAM_IMAGE_START, rom_header, rom_size); } return (struct rom_header *) (PCI_VGA_RAM_IMAGE_START); } - printk_debug("copying non-VGA ROM Image from %p to %p, 0x%x bytes\n", + printk(BIOS_DEBUG, "copying non-VGA ROM Image from %p to %p, 0x%x bytes\n", rom_header, pci_ram_image_start, rom_size); memcpy(pci_ram_image_start, rom_header, rom_size); diff --git a/src/devices/pciexp_device.c b/src/devices/pciexp_device.c index ea9c791272..a14f00426f 100644 --- a/src/devices/pciexp_device.c +++ b/src/devices/pciexp_device.c @@ -35,7 +35,7 @@ static void pciexp_tune_dev(device_t dev) return; } #ifdef CONFIG_PCIE_TUNING - printk_debug("PCIe: tuning %s\n", dev_path(dev)); + printk(BIOS_DEBUG, "PCIe: tuning %s\n", dev_path(dev)); // TODO make this depending on ASPM /* Enable ASPM Role Based Error Reporting */ diff --git a/src/devices/pcix_device.c b/src/devices/pcix_device.c index a1788920f9..e6147c9ba8 100644 --- a/src/devices/pcix_device.c +++ b/src/devices/pcix_device.c @@ -38,7 +38,7 @@ static void pcix_tune_dev(device_t dev) if (!cap) { return; } - printk_debug("%s PCI-X tuning\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s PCI-X tuning\n", dev_path(dev)); status = pci_read_config32(dev, cap + PCI_X_STATUS); orig_cmd = cmd = pci_read_config16(dev,cap + PCI_X_CMD); @@ -135,7 +135,7 @@ unsigned int pcix_scan_bridge(device_t dev, unsigned int max) } /* Print the PCI-X bus speed */ - printk_debug("PCI: %02x: %s\n", dev->link[0].secondary, pcix_speed(sstatus)); + printk(BIOS_DEBUG, "PCI: %02x: %s\n", dev->link[0].secondary, pcix_speed(sstatus)); return max; } diff --git a/src/devices/pnp_device.c b/src/devices/pnp_device.c index 6181425673..721d1ce3dc 100644 --- a/src/devices/pnp_device.c +++ b/src/devices/pnp_device.c @@ -103,7 +103,7 @@ void pnp_read_resources(device_t dev) static void pnp_set_resource(device_t dev, struct resource *resource) { if (!(resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("ERROR: %s %02lx %s size: 0x%010Lx not assigned\n", + printk(BIOS_ERR, "ERROR: %s %02lx %s size: 0x%010Lx not assigned\n", dev_path(dev), resource->index, resource_type(resource), resource->size); @@ -121,7 +121,7 @@ static void pnp_set_resource(device_t dev, struct resource *resource) pnp_set_irq(dev, resource->index, resource->base); } else { - printk_err("ERROR: %s %02lx unknown resource type\n", + printk(BIOS_ERR, "ERROR: %s %02lx unknown resource type\n", dev_path(dev), resource->index); return; } diff --git a/src/devices/root_device.c b/src/devices/root_device.c index 09582fccf2..3e3249e85e 100644 --- a/src/devices/root_device.c +++ b/src/devices/root_device.c @@ -34,7 +34,7 @@ */ void root_dev_read_resources(device_t root) { - printk_err("%s should never be called.\n", __func__); + printk(BIOS_ERR, "%s should never be called.\n", __func__); } /** @@ -46,7 +46,7 @@ void root_dev_read_resources(device_t root) */ void root_dev_set_resources(device_t root) { - printk_err("%s should never be called.\n", __func__); + printk(BIOS_ERR, "%s should never be called.\n", __func__); } /** @@ -77,7 +77,7 @@ unsigned int scan_static_bus(device_t bus, unsigned int max) device_t child; unsigned link; - printk_spew("%s for %s\n", __func__, dev_path(bus)); + printk(BIOS_SPEW, "%s for %s\n", __func__, dev_path(bus)); for(link = 0; link < bus->links; link++) { /* for smbus bus enumerate */ @@ -93,10 +93,10 @@ unsigned int scan_static_bus(device_t bus, unsigned int max) child->ops->enable(child); } if (child->path.type == DEVICE_PATH_I2C) { - printk_debug("smbus: %s[%d]->", + printk(BIOS_DEBUG, "smbus: %s[%d]->", dev_path(child->bus->dev), child->bus->link ); } - printk_debug("%s %s\n", + printk(BIOS_DEBUG, "%s %s\n", dev_path(child), child->enabled?"enabled": "disabled"); } @@ -105,12 +105,12 @@ unsigned int scan_static_bus(device_t bus, unsigned int max) for(child = bus->link[link].children; child; child = child->sibling) { if (!child->ops || !child->ops->scan_bus) continue; - printk_spew("%s scanning...\n", dev_path(child)); + printk(BIOS_SPEW, "%s scanning...\n", dev_path(child)); max = scan_bus(child, max); } } - printk_spew("%s for %s done\n", __func__, dev_path(bus)); + printk(BIOS_SPEW, "%s for %s done\n", __func__, dev_path(bus)); return max; } @@ -163,7 +163,7 @@ void root_dev_init(device_t root) void root_dev_reset(struct bus *bus) { - printk_info("Reseting board...\n"); + printk(BIOS_INFO, "Reseting board...\n"); hard_reset(); } diff --git a/src/devices/smbus_ops.c b/src/devices/smbus_ops.c index acf0b1f39d..b22428123e 100644 --- a/src/devices/smbus_ops.c +++ b/src/devices/smbus_ops.c @@ -32,7 +32,7 @@ struct bus *get_pbus_smbus(device_t dev) pbus = pbus->dev->bus; } if (!pbus || !pbus->dev || !pbus->dev->ops || !pbus->dev->ops->ops_smbus_bus) { - printk_alert("%s Cannot find smbus bus operations", dev_path(dev)); + printk(BIOS_ALERT, "%s Cannot find smbus bus operations", dev_path(dev)); die(""); } return pbus; @@ -53,15 +53,15 @@ int smbus_set_link(device_t dev) pbus_a[pbus_num++] = pbus; pbus = pbus->dev->bus; } -// printk_info("smbus_set_link: "); +// printk(BIOS_INFO, "smbus_set_link: "); for (i=pbus_num-1; i>=0; i--) { -// printk_info(" %s[%d] -> ", dev_path(pbus_a[i]->dev), pbus_a[i]->link); +// printk(BIOS_INFO, " %s[%d] -> ", dev_path(pbus_a[i]->dev), pbus_a[i]->link); if (ops_smbus_bus(get_pbus_smbus(pbus_a[i]->dev))) { if (pbus_a[i]->dev->ops && pbus_a[i]->dev->ops->set_link) pbus_a[i]->dev->ops->set_link(pbus_a[i]->dev, pbus_a[i]->link); } } -// printk_info(" %s\n", dev_path(dev)); +// printk(BIOS_INFO, " %s\n", dev_path(dev)); return pbus_num; } diff --git a/src/drivers/ati/ragexl/mach64_ct.c b/src/drivers/ati/ragexl/mach64_ct.c index 74ef0cc5e2..0a642b81db 100644 --- a/src/drivers/ati/ragexl/mach64_ct.c +++ b/src/drivers/ati/ragexl/mach64_ct.c @@ -2,7 +2,7 @@ /* FIXME: remove the FAIL definition */ #if 0 -#define FAIL(x) do { printk_debug(x); return -EINVAL; } while (0) +#define FAIL(x) do { printk(BIOS_DEBUG, x); return -EINVAL; } while (0) #else #define FAIL(x) #endif @@ -31,7 +31,7 @@ static int aty_dsp_gt(const struct fb_info_aty *info, u32 bpp, u32 memcntl, n, t_pfc, t_rp, t_ras, t_rcd, t_crd, t_rcc, t_lat; #if DEBUG_PLL==1 - printk_debug("aty_dsp_gt : mclk_fb_mult=%d\n", pll->mclk_fb_mult); + printk(BIOS_DEBUG, "aty_dsp_gt : mclk_fb_mult=%d\n", pll->mclk_fb_mult); #endif /* (64*xclk/vclk/bpp)<<11 = xclocks_per_row<<11 */ @@ -150,7 +150,7 @@ static int aty_valid_pll_ct(const struct fb_info_aty *info, u32 vclk_per, pllsclk = (1000000 * 2 * pll->sclk_fb_div) / (info->ref_clk_per * pll->pll_ref_div); - printk_debug("aty_valid_pll_ct: pllsclk=%d MHz, mclk=%d MHz\n", + printk(BIOS_DEBUG, "aty_valid_pll_ct: pllsclk=%d MHz, mclk=%d MHz\n", pllsclk, pllsclk / pll->mclk_post_div_real); #endif @@ -175,7 +175,7 @@ static int aty_valid_pll_ct(const struct fb_info_aty *info, u32 vclk_per, #if DEBUG_PLL==1 pllmclk = (1000000 * pll->mclk_fb_mult * pll->mclk_fb_div) / (info->ref_clk_per * pll->pll_ref_div); - printk_debug("aty_valid_pll_ct: pllmclk=%d MHz, xclk=%d MHz\n", + printk(BIOS_DEBUG, "aty_valid_pll_ct: pllmclk=%d MHz, xclk=%d MHz\n", pllmclk, pllmclk / pll->xclk_post_div_real); #endif @@ -301,7 +301,7 @@ u32 aty_pll_ct_to_var(const struct fb_info_aty *info, void aty_set_pll_ct(const struct fb_info_aty *info, const union aty_pll *pll) { #if DEBUG_PLL==1 - printk_debug("aty_set_pll_ct: about to program:\n" + printk(BIOS_DEBUG, "aty_set_pll_ct: about to program:\n" "refdiv=%d, extcntl=0x%02x, mfbdiv=%d\n" "spllcntl2=0x%02x, sfbdiv=%d, gencntl=0x%02x\n" "vclkcntl=0x%02x, vpostdiv=0x%02x, vfbdiv=%d\n" diff --git a/src/drivers/ati/ragexl/xlinit.c b/src/drivers/ati/ragexl/xlinit.c index 74a301fc5a..269758b394 100644 --- a/src/drivers/ati/ragexl/xlinit.c +++ b/src/drivers/ati/ragexl/xlinit.c @@ -541,7 +541,7 @@ static void ati_ragexl_init(device_t dev) #endif #if 0 - printk_debug("ati_regbase = 0x%08x, frame_buffer = 0x%08x\r\n", info->ati_regbase, info->frame_buffer); + printk(BIOS_DEBUG, "ati_regbase = 0x%08x, frame_buffer = 0x%08x\r\n", info->ati_regbase, info->frame_buffer); #endif chip_id = aty_ld_le32(CONFIG_CHIP_ID, info); @@ -557,11 +557,11 @@ static void ati_ragexl_init(device_t dev) info->features = aty_chips[j].features; goto found; } - printk_spew("ati_ragexl_init: Unknown mach64 0x%04x rev 0x%04x\n", type, rev); + printk(BIOS_SPEW, "ati_ragexl_init: Unknown mach64 0x%04x rev 0x%04x\n", type, rev); return ; found: - printk_info("ati_ragexl_init: %s [0x%04x rev 0x%02x]\r\n", chipname, type, rev); + printk(BIOS_INFO, "ati_ragexl_init: %s [0x%04x rev 0x%02x]\r\n", chipname, type, rev); #if 0 if (M64_HAS(INTEGRATED)) { /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ @@ -717,7 +717,7 @@ found: if (atyfb_decode_var(&var, &info->default_par, info)) { #if 0 - printk_debug("atyfb: can't set default video mode\n"); + printk(BIOS_DEBUG, "atyfb: can't set default video mode\n"); #endif return ; } @@ -750,7 +750,7 @@ found: #if PLL_CRTC_DECODE==1 - printk_spew("framebuffer=0x%08x, width=%d, height=%d, bpp=%d, pitch=%d\n",info->frame_buffer, + printk(BIOS_SPEW, "framebuffer=0x%08x, width=%d, height=%d, bpp=%d, pitch=%d\n",info->frame_buffer, (((info->current_par.crtc.h_tot_disp>>16) & 0xff)+1)*8, ((info->current_par.crtc.v_tot_disp>>16) & 0x7ff)+1, info->current_par.crtc.bpp, @@ -762,7 +762,7 @@ found: info->current_par.crtc.bpp, info->current_par.crtc.vxres*info->current_par.crtc.bpp/8,info->frame_buffer); #else - printk_spew("framebuffer=0x%08x, width=%d, height=%d, bpp=%d, pitch=%d\n",info->frame_buffer, + printk(BIOS_SPEW, "framebuffer=0x%08x, width=%d, height=%d, bpp=%d, pitch=%d\n",info->frame_buffer, (((info->default_par.crtc.h_tot_disp>>16) & 0xff)+1)*8, ((info->default_par.crtc.v_tot_disp>>16) & 0x7ff)+1, info->default_par.crtc.bpp, @@ -1184,7 +1184,7 @@ static int atyfb_set_var(struct fb_var_screeninfo *var, int con, atyfb_encode_var(var, &par, (struct fb_info_aty *)info); #if 0 - printk_info("atyfb_set_var: activate=%d\n", activate & FB_ACTIVATE_MASK); + printk(BIOS_INFO, "atyfb_set_var: activate=%d\n", activate & FB_ACTIVATE_MASK); #endif if ((activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) { diff --git a/src/drivers/emulation/qemu/init.c b/src/drivers/emulation/qemu/init.c index df22d4b453..20e080b4f7 100644 --- a/src/drivers/emulation/qemu/init.c +++ b/src/drivers/emulation/qemu/init.c @@ -56,7 +56,7 @@ static void qemu_init(void) { int width=640, height=480, depth=8; - printk_debug("Initializing VGA!\n"); + printk(BIOS_DEBUG, "Initializing VGA!\n"); vbe_outw(VBE_DISPI_INDEX_XRES, width); vbe_outw(VBE_DISPI_INDEX_YRES, height); diff --git a/src/drivers/generic/debug/debug_dev.c b/src/drivers/generic/debug/debug_dev.c index bc5b5e6988..448d7b83c3 100644 --- a/src/drivers/generic/debug/debug_dev.c +++ b/src/drivers/generic/debug/debug_dev.c @@ -17,10 +17,10 @@ static void print_pci_regs(struct device *dev) for(i=0;i<256;i++) { byte = pci_read_config8(dev, i); - if((i & 0xf)==0) printk_debug("\n%02x:",i); - printk_debug(" %02x",byte); + if((i & 0xf)==0) printk(BIOS_DEBUG, "\n%02x:",i); + printk(BIOS_DEBUG, " %02x",byte); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } static void print_mem(void) @@ -28,10 +28,10 @@ static void print_mem(void) unsigned int i; unsigned int start = 0xfffff000; for(i=start;i<0xffffffff;i++) { - if((i & 0xf)==0) printk_debug("\n %08x:",i); - printk_debug(" %02x",(unsigned char)*((unsigned char *)i)); + if((i & 0xf)==0) printk(BIOS_DEBUG, "\n %08x:",i); + printk(BIOS_DEBUG, " %02x",(unsigned char)*((unsigned char *)i)); } - printk_debug(" %02x\n",(unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x\n",(unsigned char)*((unsigned char *)i)); } static void print_pci_regs_all(void) @@ -51,7 +51,7 @@ static void print_pci_regs_all(void) if(!dev->enabled) { continue; } - printk_debug("\n%02x:%02x:%02x aka %s", + printk(BIOS_DEBUG, "\n%02x:%02x:%02x aka %s", bus, device, function, dev_path(dev)); print_pci_regs(dev); } @@ -65,19 +65,19 @@ static void print_cpuid() unsigned index; unsigned eax, ebx, ecx, edx; index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); + printk(BIOS_DEBUG, "calling cpuid 0x%08x\n", index); asm volatile( "cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (index) ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", + printk(BIOS_DEBUG, "cpuid[%08x]: %08x %08x %08x %08x\n", index, eax, ebx, ecx, edx); if (edx & (3 << 1)) { index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); + printk(BIOS_DEBUG, "Reading msr: 0x%08x\n", index); msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", + printk(BIOS_DEBUG, "msr[0x%08x]: 0x%08x%08x\n", index, msr.hi, msr.lo); } @@ -85,23 +85,23 @@ static void print_cpuid() static void print_smbus_regs(struct device *dev) { int j; - printk_debug("smbus: %s[%d]->", dev_path(dev->bus->dev), dev->bus->link); - printk_debug("%s", dev_path(dev)); + printk(BIOS_DEBUG, "smbus: %s[%d]->", dev_path(dev->bus->dev), dev->bus->link); + printk(BIOS_DEBUG, "%s", dev_path(dev)); for(j = 0; j < 256; j++) { int status; unsigned char byte; status = smbus_read_byte(dev, j); if (status < 0) { - // printk_debug("bad device status= %08x\r\n", status); + // printk(BIOS_DEBUG, "bad device status= %08x\r\n", status); break; } if ((j & 0xf) == 0) { - printk_debug("\r\n%02x: ", j); + printk(BIOS_DEBUG, "\r\n%02x: ", j); } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } - printk_debug("\r\n"); + printk(BIOS_DEBUG, "\r\n"); } static void print_smbus_regs_all(struct device *dev) @@ -133,28 +133,28 @@ static void print_msr_dualcore(void) unsigned index; unsigned eax, ebx, ecx, edx; index = 0x80000008; - printk_debug("calling cpuid 0x%08x\n", index); + printk(BIOS_DEBUG, "calling cpuid 0x%08x\n", index); asm volatile( "cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (index) ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", + printk(BIOS_DEBUG, "cpuid[%08x]: %08x %08x %08x %08x\n", index, eax, ebx, ecx, edx); - printk_debug("core number %d\n", ecx & 0xff); + printk(BIOS_DEBUG, "core number %d\n", ecx & 0xff); index = 0xc001001f; - printk_debug("Reading msr: 0x%08x\n", index); + printk(BIOS_DEBUG, "Reading msr: 0x%08x\n", index); msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x bit 54 is %d\n", + printk(BIOS_DEBUG, "msr[0x%08x]: 0x%08x%08x bit 54 is %d\n", index, msr.hi, msr.lo, (msr.hi>> (54-32)) & 1); #if 0 msr.hi |= (1<<(54-32)); wrmsr(index, msr); msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", + printk(BIOS_DEBUG, "msr[0x%08x]: 0x%08x%08x\n", index, msr.hi, msr.lo); #endif @@ -166,7 +166,7 @@ static void print_cache_size(void) unsigned int n, eax, ebx, ecx, edx; index = 0x80000000; - printk_debug("calling cpuid 0x%08x\n", index); + printk(BIOS_DEBUG, "calling cpuid 0x%08x\n", index); asm volatile( "cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) @@ -176,25 +176,25 @@ static void print_cache_size(void) if (n >= 0x80000005) { index = 0x80000005; - printk_debug("calling cpuid 0x%08x\n", index); + printk(BIOS_DEBUG, "calling cpuid 0x%08x\n", index); asm volatile( "cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (index) ); - printk_debug("CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", + printk(BIOS_DEBUG, "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); } if (n >= 0x80000006) { index = 0x80000006; - printk_debug("calling cpuid 0x%08x\n", index); + printk(BIOS_DEBUG, "calling cpuid 0x%08x\n", index); asm volatile( "cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (index) ); - printk_debug("CPU: L2 Cache: %dK (%d bytes/line)\n", + printk(BIOS_DEBUG, "CPU: L2 Cache: %dK (%d bytes/line)\n", ecx >> 16, ecx & 0xFF); } @@ -220,11 +220,11 @@ static void print_tsc(void) { tsc_t tsc; tsc = rdtsc(); - printk_debug("tsc: 0x%08x%08x\n", + printk(BIOS_DEBUG, "tsc: 0x%08x%08x\n", tsc.hi, tsc.lo); udelay(1); tsc = rdtsc(); - printk_debug("tsc: 0x%08x%08x after udelay(1) \n", + printk(BIOS_DEBUG, "tsc: 0x%08x%08x after udelay(1) \n", tsc.hi, tsc.lo); } @@ -238,11 +238,11 @@ static void debug_init(device_t dev) switch(dev->path.pnp.device) { case 0: parent = dev->bus->dev; - printk_debug("DEBUG: %s", dev_path(parent)); + printk(BIOS_DEBUG, "DEBUG: %s", dev_path(parent)); if(parent->chip_ops && parent->chip_ops->name) { - printk_debug(": %s\n", parent->chip_ops->name); + printk(BIOS_DEBUG, ": %s\n", parent->chip_ops->name); } else { - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } break; diff --git a/src/drivers/i2c/adm1026/adm1026.c b/src/drivers/i2c/adm1026/adm1026.c index ce8181ef3d..8cf6281bda 100644 --- a/src/drivers/i2c/adm1026/adm1026.c +++ b/src/drivers/i2c/adm1026/adm1026.c @@ -44,7 +44,7 @@ static void adm1026_enable_monitoring(device_t dev) result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); if (!(result & CFG1_MONITOR)) { - printk_debug("ADM1026: monitoring would not enable"); + printk(BIOS_DEBUG, "ADM1026: monitoring would not enable"); } } static void adm1026_noop(device_t dummy) diff --git a/src/drivers/i2c/adm1027/adm1027.c b/src/drivers/i2c/adm1027/adm1027.c index 7ce445b32d..0caf66e088 100644 --- a/src/drivers/i2c/adm1027/adm1027.c +++ b/src/drivers/i2c/adm1027/adm1027.c @@ -26,7 +26,7 @@ static void adm1027_enable_monitoring(device_t dev) result = smbus_read_byte(dev, ADM1027_REG_CONFIG1); if (!(result & CFG1_RDY)) { - printk_debug("ADM1027: monitoring not ready\r\n"); + printk(BIOS_DEBUG, "ADM1027: monitoring not ready\r\n"); return; } result = (result | CFG1_STRT); @@ -34,9 +34,9 @@ static void adm1027_enable_monitoring(device_t dev) result = smbus_read_byte(dev, ADM1027_REG_CONFIG1); if (!(result & CFG1_STRT)) { - printk_debug("ADM1027: monitoring would not enable\r\n"); + printk(BIOS_DEBUG, "ADM1027: monitoring would not enable\r\n"); } - printk_debug("ADM1027: monitoring enabled\r\n"); + printk(BIOS_DEBUG, "ADM1027: monitoring enabled\r\n"); } static void adm1027_init(device_t dev) diff --git a/src/drivers/si/3114/si_sata.c b/src/drivers/si/3114/si_sata.c index dc23e0a6ce..8d06fb6fbc 100644 --- a/src/drivers/si/3114/si_sata.c +++ b/src/drivers/si/3114/si_sata.c @@ -45,7 +45,7 @@ static void si_sata_init(struct device *dev) dword &= ~(1<<0); pci_write_config32(dev, 0x40, dword); - printk_debug("Class code restored.\n"); + printk(BIOS_DEBUG, "Class code restored.\n"); } diff --git a/src/drivers/trident/blade3d/blade3d.c b/src/drivers/trident/blade3d/blade3d.c index 0bf81d60ec..e50d40514b 100644 --- a/src/drivers/trident/blade3d/blade3d.c +++ b/src/drivers/trident/blade3d/blade3d.c @@ -777,7 +777,7 @@ static int init9880(void) //if chip revB if (CHIPREV == 0x02) { - printk_debug("blade3d: chip revision B\n"); + printk(BIOS_DEBUG, "blade3d: chip revision B\n"); outp(Port_CRX, 0xc0); outp(Port_CRX + 1, 0x00); } @@ -805,7 +805,7 @@ static void config_OEM_regs(void) lpMode3_temp = &Mode3_temp[0]; lpInit_reg = &Init_reg[0]; - printk_debug("blade3d: config_OEM_regs()\n"); + printk(BIOS_DEBUG, "blade3d: config_OEM_regs()\n"); outp(Port_GRX, 0x24); outp(Port_GRX + 1, 0xe0); @@ -943,13 +943,13 @@ static void init_SGRAM(void) } } else { //SGRAM - printk_debug("blade3d: No SGRAM found.\n"); + printk(BIOS_DEBUG, "blade3d: No SGRAM found.\n"); } } static void config_video_memory(void) { - printk_debug("blade3d: Error: no video memory init\n"); + printk(BIOS_DEBUG, "blade3d: Error: no video memory init\n"); } static void set_video_mode(void) @@ -959,7 +959,7 @@ static void set_video_mode(void) lpDef_Reg_struct lpMode3_reg; lpMode3_reg = &Mode3_reg[0]; - printk_debug("blade3d: setting video mode\n"); + printk(BIOS_DEBUG, "blade3d: setting video mode\n"); outp(0x3c2, 0x67); for (i = 0; i < Length_Mode3_reg; i++) { if (lpMode3_reg[i].rPort == Port_BRX) { @@ -982,7 +982,7 @@ static void set_video_mode(void) static void set_font(void) { - printk_debug("blade3d: setting font (not implemented)\n"); + printk(BIOS_DEBUG, "blade3d: setting font (not implemented)\n"); } static void clear_MEM(void) @@ -1008,7 +1008,7 @@ static void clear_MEM(void) static void trident_blade3d_init(struct device *dev) { - printk_info("blade3d: initializing video card\n"); + printk(BIOS_INFO, "blade3d: initializing video card\n"); init9880(); } diff --git a/src/include/assert.h b/src/include/assert.h index 095023a821..3bd6be972d 100644 --- a/src/include/assert.h +++ b/src/include/assert.h @@ -48,13 +48,13 @@ /* GCC and CAR versions */ #define ASSERT(x) { \ if (!(x)) { \ - printk_emerg("ASSERTION FAILED: file '%s', " \ + printk(BIOS_EMERG, "ASSERTION FAILED: file '%s', " \ " line %d\n", __FILE__, __LINE__); \ /* die(""); */ \ } \ } #define BUG() { \ - printk_emerg("BUG ENCOUNTERED: SYSTEM HALTED at file '%s', " \ + printk(BIOS_EMERG, "BUG ENCOUNTERED: SYSTEM HALTED at file '%s', " \ " line %d\n", __FILE__, __LINE__); \ /* die(""); */ \ } diff --git a/src/include/cpu/x86/bist.h b/src/include/cpu/x86/bist.h index c6cd7349fb..153b39e22c 100644 --- a/src/include/cpu/x86/bist.h +++ b/src/include/cpu/x86/bist.h @@ -5,7 +5,7 @@ static void report_bist_failure(u32 bist) { if (bist != 0) { #if CONFIG_USE_PRINTK_IN_CAR - printk_emerg("BIST failed: %08x", bist); + printk(BIOS_EMERG, "BIST failed: %08x", bist); #else print_emerg("BIST failed: "); print_emerg_hex32(bist); diff --git a/src/lib/cbfs.c b/src/lib/cbfs.c index e694952f39..390e7796e8 100644 --- a/src/lib/cbfs.c +++ b/src/lib/cbfs.c @@ -42,13 +42,13 @@ static int cbfs_decompress(int algo, void *src, void *dst, int len) case CBFS_COMPRESS_LZMA: if (!ulzma(src, dst)) { - printk_err("CBFS: LZMA decompression failed!\n"); + printk(BIOS_ERR, "CBFS: LZMA decompression failed!\n"); return -1; } return 0; default: - printk_info( "CBFS: Unknown compression type %d\n", algo); + printk(BIOS_INFO, "CBFS: Unknown compression type %d\n", algo); return -1; } } @@ -63,20 +63,20 @@ static struct cbfs_header *cbfs_master_header(void) struct cbfs_header *header; void *ptr = (void *)*((unsigned long *) CBFS_HEADPTR_ADDR); - printk_spew("Check CBFS header at %p\n", ptr); + printk(BIOS_SPEW, "Check CBFS header at %p\n", ptr); header = (struct cbfs_header *) ptr; - printk_spew("magic is %08x\n", ntohl(header->magic)); + printk(BIOS_SPEW, "magic is %08x\n", ntohl(header->magic)); if (ntohl(header->magic) != CBFS_HEADER_MAGIC) { - printk_err("ERROR: No valid CBFS header found!\n"); + printk(BIOS_ERR, "ERROR: No valid CBFS header found!\n"); if (header->magic == 0xffffffff) { - printk_err("Maybe the ROM isn't entirely mapped yet?\n" + printk(BIOS_ERR, "Maybe the ROM isn't entirely mapped yet?\n" "See (and report to) http://www.coreboot.org/Infrastructure_Projects#CBFS\n"); } return NULL; } - printk_spew("Found CBFS header at %p\n", ptr); + printk(BIOS_SPEW, "Found CBFS header at %p\n", ptr); return header; } @@ -94,17 +94,17 @@ struct cbfs_file *cbfs_find(const char *name) while(1) { struct cbfs_file *file = (struct cbfs_file *) offset; if (!cbfs_check_magic(file)) return NULL; - printk_spew("Check %s\n", CBFS_NAME(file)); + printk(BIOS_SPEW, "Check %s\n", CBFS_NAME(file)); if (!strcmp(CBFS_NAME(file), name)) return file; int flen = ntohl(file->len); int foffset = ntohl(file->offset); - printk_spew("CBFS: follow chain: %p + %x + %x + align -> ", (void *)offset, foffset, flen); + printk(BIOS_SPEW, "CBFS: follow chain: %p + %x + %x + align -> ", (void *)offset, foffset, flen); unsigned long oldoffset = offset; offset = ALIGN(offset + foffset + flen, align); - printk_spew("%p\n", (void *)offset); + printk(BIOS_SPEW, "%p\n", (void *)offset); if (offset <= oldoffset) return NULL; if (offset < 0xFFFFFFFF - ntohl(header->romsize)) @@ -117,13 +117,13 @@ void *cbfs_find_file(const char *name, int type) struct cbfs_file *file = cbfs_find(name); if (file == NULL) { - printk_info( "CBFS: Could not find file %s\n", + printk(BIOS_INFO, "CBFS: Could not find file %s\n", name); return NULL; } if (ntohl(file->type) != type) { - printk_info( "CBFS: File %s is of type %x instead of" + printk(BIOS_INFO, "CBFS: File %s is of type %x instead of" "type %x\n", name, file->type, type); return NULL; @@ -193,7 +193,7 @@ void * cbfs_load_stage(const char *name) if (stage == NULL) return (void *) -1; - printk_info("Stage: loading %s @ 0x%x (%d bytes), entry @ 0x%llx\n", + printk(BIOS_INFO, "Stage: loading %s @ 0x%x (%d bytes), entry @ 0x%llx\n", name, (u32) stage->load, stage->memlen, stage->entry); @@ -206,7 +206,7 @@ void * cbfs_load_stage(const char *name) stage->len)) return (void *) -1; - printk_debug("Stage: done loading.\n"); + printk(BIOS_DEBUG, "Stage: done loading.\n"); entry = stage->entry; // entry = ntohl((u32) stage->entry); @@ -223,13 +223,13 @@ int cbfs_execute_stage(const char *name) return 1; if (ntohl(stage->compression) != CBFS_COMPRESS_NONE) { - printk_info( "CBFS: Unable to run %s: Compressed file" + printk(BIOS_INFO, "CBFS: Unable to run %s: Compressed file" "Not supported for in-place execution\n", name); return 1; } /* FIXME: This isn't right */ - printk_info( "CBFS: run @ %p\n", (void *) ntohl((u32) stage->entry)); + printk(BIOS_INFO, "CBFS: run @ %p\n", (void *) ntohl((u32) stage->entry)); return run_address((void *) ntohl((u32) stage->entry)); } diff --git a/src/lib/cbmem.c b/src/lib/cbmem.c index 92a848497d..c57018231a 100644 --- a/src/lib/cbmem.c +++ b/src/lib/cbmem.c @@ -23,7 +23,7 @@ #include <console/console.h> #if 1 -#define debug(x...) printk_debug(x) +#define debug(x...) printk(BIOS_DEBUG, x) #else #define debug(x...) #endif @@ -110,13 +110,13 @@ void *cbmem_add(u32 id, u64 size) } if (cbmem_toc[0].magic != CBMEM_MAGIC) { - printk_err("ERROR: CBMEM was not initialized yet.\n"); + printk(BIOS_ERR, "ERROR: CBMEM was not initialized yet.\n"); return NULL; } /* Will the entry fit at all? */ if (size > cbmem_toc[0].size) { - printk_err("ERROR: Not enough memory for table %x\n", id); + printk(BIOS_ERR, "ERROR: Not enough memory for table %x\n", id); return NULL; } @@ -132,7 +132,7 @@ void *cbmem_add(u32 id, u64 size) } if (i >= MAX_CBMEM_ENTRIES) { - printk_err("ERROR: No more CBMEM entries available.\n"); + printk(BIOS_ERR, "ERROR: No more CBMEM entries available.\n"); return NULL; } @@ -214,19 +214,19 @@ void cbmem_list(void) if (cbmem_toc[i].magic != CBMEM_MAGIC) continue; - printk_debug("%2d. ", i); + printk(BIOS_DEBUG, "%2d. ", i); switch (cbmem_toc[i].id) { - case CBMEM_ID_FREESPACE: printk_debug("FREE SPACE "); break; - case CBMEM_ID_GDT: printk_debug("GDT "); break; - case CBMEM_ID_ACPI: printk_debug("ACPI "); break; - case CBMEM_ID_CBTABLE: printk_debug("COREBOOT "); break; - case CBMEM_ID_PIRQ: printk_debug("IRQ TABLE "); break; - case CBMEM_ID_MPTABLE: printk_debug("SMP TABLE "); break; - case CBMEM_ID_RESUME: printk_debug("ACPI RESUME"); break; - default: printk_debug("%08x ", cbmem_toc[i].id); + case CBMEM_ID_FREESPACE: printk(BIOS_DEBUG, "FREE SPACE "); break; + case CBMEM_ID_GDT: printk(BIOS_DEBUG, "GDT "); break; + case CBMEM_ID_ACPI: printk(BIOS_DEBUG, "ACPI "); break; + case CBMEM_ID_CBTABLE: printk(BIOS_DEBUG, "COREBOOT "); break; + case CBMEM_ID_PIRQ: printk(BIOS_DEBUG, "IRQ TABLE "); break; + case CBMEM_ID_MPTABLE: printk(BIOS_DEBUG, "SMP TABLE "); break; + case CBMEM_ID_RESUME: printk(BIOS_DEBUG, "ACPI RESUME"); break; + default: printk(BIOS_DEBUG, "%08x ", cbmem_toc[i].id); } - printk_debug("%08llx ", cbmem_toc[i].base); - printk_debug("%08llx\n", cbmem_toc[i].size); + printk(BIOS_DEBUG, "%08llx ", cbmem_toc[i].base); + printk(BIOS_DEBUG, "%08llx\n", cbmem_toc[i].size); } } #endif diff --git a/src/lib/clog2.c b/src/lib/clog2.c index 740b8d9f74..c6fe6f6cc8 100644 --- a/src/lib/clog2.c +++ b/src/lib/clog2.c @@ -17,7 +17,7 @@ unsigned long log2(unsigned long x) if (! x) { #ifdef DEBUG_LOG2 - printk_warning("%s called with invalid parameter of 0\n", + printk(BIOS_WARNING, "%s called with invalid parameter of 0\n", __func__); #endif return -1; diff --git a/src/lib/generic_dump_spd.c b/src/lib/generic_dump_spd.c index 2a71353b60..b4ff598612 100644 --- a/src/lib/generic_dump_spd.c +++ b/src/lib/generic_dump_spd.c @@ -69,25 +69,25 @@ void dump_spd_registers(void) { unsigned device; device = SMBUS_MEM_DEVICE_START; - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); while(device <= SMBUS_MEM_DEVICE_END) { int status = 0; int i; - printk_debug("dimm %02x", device); + printk(BIOS_DEBUG, "dimm %02x", device); for(i = 0; (i < 256) && (status == 0); i++) { unsigned char byte; if ((i % 20) == 0) { - printk_debug("\n%3d: ", i); + printk(BIOS_DEBUG, "\n%3d: ", i); } status = smbus_read_byte(device, i, &byte); if (status != 0) { - printk_debug("bad device\n"); + printk(BIOS_DEBUG, "bad device\n"); continue; } - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } device += SMBUS_MEM_DEVICE_INC; - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } } #endif diff --git a/src/lib/generic_sdram.c b/src/lib/generic_sdram.c index 7be0537484..9685267c08 100644 --- a/src/lib/generic_sdram.c +++ b/src/lib/generic_sdram.c @@ -7,7 +7,7 @@ static inline void print_debug_sdram_8(const char *strval, uint32_t val) { #if CONFIG_USE_INIT - printk_debug("%s%02x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%02x\r\n", strval, val); #else print_debug(strval); print_debug_hex8(val); print_debug("\r\n"); #endif diff --git a/src/lib/lzma.c b/src/lib/lzma.c index fc533c03f1..532a2b2614 100644 --- a/src/lib/lzma.c +++ b/src/lib/lzma.c @@ -29,19 +29,19 @@ unsigned long ulzma(unsigned char * src, unsigned char * dst) memcpy(properties, src, LZMA_PROPERTIES_SIZE); outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE); if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) { - printk_warning("lzma: Incorrect stream properties.\n"); + printk(BIOS_WARNING, "lzma: Incorrect stream properties.\n"); return 0; } mallocneeds = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); if (mallocneeds > 15980) { - printk_warning("lzma: Decoder scratchpad too small!\n"); + printk(BIOS_WARNING, "lzma: Decoder scratchpad too small!\n"); return 0; } state.Probs = (CProb *)scratchpad; res = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8, (SizeT)0xffffffff, &inProcessed, dst, outSize, &outProcessed); if (res != 0) { - printk_warning("lzma: Decoding error = %d\n", res); + printk(BIOS_WARNING, "lzma: Decoding error = %d\n", res); return 0; } return outSize; diff --git a/src/lib/malloc.c b/src/lib/malloc.c index 8c77fd396e..2ed23ad795 100644 --- a/src/lib/malloc.c +++ b/src/lib/malloc.c @@ -4,7 +4,7 @@ #if 0 #define MALLOCDBG(x) #else -#define MALLOCDBG(x...) printk_spew(x) +#define MALLOCDBG(x...) printk(BIOS_SPEW, x) #endif extern unsigned char _heap, _eheap; static void *free_mem_ptr = &_heap; /* Start of heap */ diff --git a/src/lib/ramtest.c b/src/lib/ramtest.c index d707bf2385..5f24bc1c7d 100644 --- a/src/lib/ramtest.c +++ b/src/lib/ramtest.c @@ -34,7 +34,7 @@ static void ram_fill(unsigned long start, unsigned long stop) * Fill. */ #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("DRAM fill: 0x%08lx-0x%08lx\r\n", start, stop); + printk(BIOS_DEBUG, "DRAM fill: 0x%08lx-0x%08lx\r\n", start, stop); #else print_debug("DRAM fill: "); print_debug_hex32(start); @@ -46,7 +46,7 @@ static void ram_fill(unsigned long start, unsigned long stop) /* Display address being filled */ if (!(addr & 0xfffff)) { #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("%08lx \r", addr); + printk(BIOS_DEBUG, "%08lx \r", addr); #else print_debug_hex32(addr); print_debug(" \r"); @@ -60,7 +60,7 @@ static void ram_fill(unsigned long start, unsigned long stop) #endif /* Display final address */ #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("%08lx\r\nDRAM filled\r\n", addr); + printk(BIOS_DEBUG, "%08lx\r\nDRAM filled\r\n", addr); #else print_debug_hex32(addr); print_debug("\r\nDRAM filled\r\n"); @@ -75,7 +75,7 @@ static void ram_verify(unsigned long start, unsigned long stop) * Verify. */ #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("DRAM verify: 0x%08lx-0x%08lx\r\n", start, stop); + printk(BIOS_DEBUG, "DRAM verify: 0x%08lx-0x%08lx\r\n", start, stop); #else print_debug("DRAM verify: "); print_debug_hex32(start); @@ -88,7 +88,7 @@ static void ram_verify(unsigned long start, unsigned long stop) /* Display address being tested */ if (!(addr & 0xfffff)) { #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("%08lx \r", addr); + printk(BIOS_DEBUG, "%08lx \r", addr); #else print_debug_hex32(addr); print_debug(" \r"); @@ -98,7 +98,7 @@ static void ram_verify(unsigned long start, unsigned long stop) if (value != addr) { /* Display address with error */ #if CONFIG_USE_PRINTK_IN_CAR - printk_err("Fail: @0x%08lx Read value=0x%08lx\r\n", addr, value); + printk(BIOS_ERR, "Fail: @0x%08lx Read value=0x%08lx\r\n", addr, value); #else print_err("Fail: @0x"); print_err_hex32(addr); @@ -109,7 +109,7 @@ static void ram_verify(unsigned long start, unsigned long stop) i++; if(i>256) { #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("Aborting.\n\r"); + printk(BIOS_DEBUG, "Aborting.\n\r"); #else print_debug("Aborting.\n\r"); #endif @@ -119,14 +119,14 @@ static void ram_verify(unsigned long start, unsigned long stop) } /* Display final address */ #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("%08lx", addr); + printk(BIOS_DEBUG, "%08lx", addr); #else print_debug_hex32(addr); #endif if (i) { #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("\r\nDRAM did _NOT_ verify!\r\n"); + printk(BIOS_DEBUG, "\r\nDRAM did _NOT_ verify!\r\n"); #else print_debug("\r\nDRAM did _NOT_ verify!\r\n"); #endif @@ -134,7 +134,7 @@ static void ram_verify(unsigned long start, unsigned long stop) } else { #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("\r\nDRAM range verified.\r\n"); + printk(BIOS_DEBUG, "\r\nDRAM range verified.\r\n"); #else print_debug("\r\nDRAM range verified.\r\n"); #endif @@ -150,7 +150,7 @@ void ram_check(unsigned long start, unsigned long stop) * are tested. -Tyson */ #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("Testing DRAM : %08lx - %08lx\r\n", start, stop); + printk(BIOS_DEBUG, "Testing DRAM : %08lx - %08lx\r\n", start, stop); #else print_debug("Testing DRAM : "); print_debug_hex32(start); @@ -161,7 +161,7 @@ void ram_check(unsigned long start, unsigned long stop) ram_fill(start, stop); ram_verify(start, stop); #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("Done.\r\n"); + printk(BIOS_DEBUG, "Done.\r\n"); #else print_debug("Done.\r\n"); #endif diff --git a/src/lib/usbdebug_direct.c b/src/lib/usbdebug_direct.c index c9fe68ecfe..cb70c625e2 100644 --- a/src/lib/usbdebug_direct.c +++ b/src/lib/usbdebug_direct.c @@ -23,7 +23,7 @@ #include <console/console.h> #else #if CONFIG_USE_PRINTK_IN_CAR==0 -#define printk_debug(fmt, arg...) do {} while(0) +#define printk(BIOS_DEBUG, fmt, arg...) do {} while(0) #endif #endif @@ -304,7 +304,7 @@ static int ehci_reset_port(struct ehci_regs *ehci_regs, int port) delay_time += delay; } while ((portsc & PORT_RESET) && (--loop > 0)); if (!loop) { - printk_debug("ehci_reset_port forced done"); + printk(BIOS_DEBUG, "ehci_reset_port forced done"); } } @@ -342,7 +342,7 @@ static int ehci_wait_for_port(struct ehci_regs *ehci_regs, int port) #define DBGP_DEBUG 1 #if DBGP_DEBUG -# define dbgp_printk printk_debug +# define dbgp_printk(fmt, arg...) printk(BIOS_DEBUG, fmt, arg) #else #define dbgp_printk(fmt, arg...) do {} while(0) #endif diff --git a/src/mainboard/amd/db800/mainboard.c b/src/mainboard/amd/db800/mainboard.c index 624c5ad190..f95ea22525 100644 --- a/src/mainboard/amd/db800/mainboard.c +++ b/src/mainboard/amd/db800/mainboard.c @@ -23,8 +23,8 @@ static void init(struct device *dev) { - printk_debug("AMD DB800 ENTER %s\n", __func__); - printk_debug("AMD DB800 EXIT %s\n", __func__); + printk(BIOS_DEBUG, "AMD DB800 ENTER %s\n", __func__); + printk(BIOS_DEBUG, "AMD DB800 EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/amd/dbm690t/acpi_tables.c b/src/mainboard/amd/dbm690t/acpi_tables.c index f450b7c4bf..b77a3bd507 100644 --- a/src/mainboard/amd/dbm690t/acpi_tables.c +++ b/src/mainboard/amd/dbm690t/acpi_tables.c @@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for (i = start; i < end; i++) { if ((i & 0xf) == 0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start) #if 0 /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current += slit->header.length; @@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start) } else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; ssdtx = (acpi_header_t *) current; switch (sysconf.hcid[i]) { @@ -243,20 +243,20 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -264,28 +264,28 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/amd/dbm690t/fadt.c b/src/mainboard/amd/dbm690t/fadt.c index e7bc017bbd..5d28790b4d 100644 --- a/src/mainboard/amd/dbm690t/fadt.c +++ b/src/mainboard/amd/dbm690t/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/amd/dbm690t/irq_tables.c b/src/mainboard/amd/dbm690t/irq_tables.c index 38479aac14..8457745724 100644 --- a/src/mainboard/amd/dbm690t/irq_tables.c +++ b/src/mainboard/amd/dbm690t/irq_tables.c @@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/amd/dbm690t/mainboard.c b/src/mainboard/amd/dbm690t/mainboard.c index 3d5ca18e82..c85c210a5b 100644 --- a/src/mainboard/amd/dbm690t/mainboard.c +++ b/src/mainboard/amd/dbm690t/mainboard.c @@ -61,7 +61,7 @@ static void enable_onboard_nic() { u8 byte; - printk_info("%s.\n", __func__); + printk(BIOS_INFO, "%s.\n", __func__); /* set index register 0C50h to 13h (miscellaneous control) */ outb(0x13, 0xC50); /* CMIndex */ @@ -100,7 +100,7 @@ static void get_ide_dma66() struct device *sm_dev; struct device *ide_dev; - printk_info("%s.\n", __func__); + printk(BIOS_INFO, "%s.\n", __func__); sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); byte = pci_read_config8(sm_dev, 0xA9); @@ -137,7 +137,7 @@ static void set_thermal_config() byte = ADT7461_read_byte(0x02); /* read status register to clear it */ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); /* sb600 settings for thermal config */ /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -190,19 +190,19 @@ void dbm690t_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard DBM690T Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard DBM690T Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -224,7 +224,7 @@ void dbm690t_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -244,7 +244,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/amd/dbm690t/mptable.c b/src/mainboard/amd/dbm690t/mptable.c index 4c71776931..3b7ffdaa4b 100644 --- a/src/mainboard/amd/dbm690t/mptable.c +++ b/src/mainboard/amd/dbm690t/mptable.c @@ -199,7 +199,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c index 53e7163e8b..8e5ffb3e73 100644 --- a/src/mainboard/amd/dbm690t/romstage.c +++ b/src/mainboard/amd/dbm690t/romstage.c @@ -134,7 +134,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); setup_dbm690t_resource_map(); @@ -160,7 +160,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Read FIDVID_STATUS */ msr=rdmsr(0xc0010042); - printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); enable_fid_change(); enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); @@ -168,16 +168,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010042); - printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); } else { - printk_debug("Changing FIDVID not supported\n"); + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); } needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); - printk_debug("needs_reset=0x%x\n", needs_reset); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); if (needs_reset) { @@ -188,7 +188,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now; */ - printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/amd/mahogany/acpi_tables.c b/src/mainboard/amd/mahogany/acpi_tables.c index fdc56c8f80..41bf454810 100644 --- a/src/mainboard/amd/mahogany/acpi_tables.c +++ b/src/mainboard/amd/mahogany/acpi_tables.c @@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for (i = start; i < end; i++) { if ((i & 0xf) == 0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start) #if 0 /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current += slit->header.length; @@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start) } else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; ssdtx = (acpi_header_t *) current; switch (sysconf.hcid[i]) { @@ -243,20 +243,20 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -264,28 +264,28 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/amd/mahogany/fadt.c b/src/mainboard/amd/mahogany/fadt.c index e4b0db0ed9..962273b446 100644 --- a/src/mainboard/amd/mahogany/fadt.c +++ b/src/mainboard/amd/mahogany/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/amd/mahogany/irq_tables.c b/src/mainboard/amd/mahogany/irq_tables.c index be4c32df6c..3e54c02676 100644 --- a/src/mainboard/amd/mahogany/irq_tables.c +++ b/src/mainboard/amd/mahogany/irq_tables.c @@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/amd/mahogany/mainboard.c b/src/mainboard/amd/mahogany/mainboard.c index 47c153cf0a..73ff5198ee 100644 --- a/src/mainboard/amd/mahogany/mainboard.c +++ b/src/mainboard/amd/mahogany/mainboard.c @@ -101,21 +101,21 @@ void mahogany_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard MAHOGANY Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info - ("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk + (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info - ("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk + (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); /* refer to UMA Size Consideration in 780 BDG. */ @@ -134,7 +134,7 @@ void mahogany_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -153,7 +153,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_start=0x%x, uma_memory_size=0x%x \n", + printk(BIOS_INFO, "uma_memory_start=0x%x, uma_memory_size=0x%x \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/amd/mahogany/mptable.c b/src/mainboard/amd/mahogany/mptable.c index 2ffa1ac46e..7a2701711b 100644 --- a/src/mainboard/amd/mahogany/mptable.c +++ b/src/mainboard/amd/mahogany/mptable.c @@ -206,7 +206,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c index c8f63e470a..c14d7c0a63 100644 --- a/src/mainboard/amd/mahogany/romstage.c +++ b/src/mainboard/amd/mahogany/romstage.c @@ -133,7 +133,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); setup_mahogany_resource_map(); @@ -159,7 +159,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Read FIDVID_STATUS */ msr=rdmsr(0xc0010042); - printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); enable_fid_change(); enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); @@ -167,16 +167,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010042); - printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); } else { - printk_debug("Changing FIDVID not supported\n"); + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); } needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs780_htinit(); - printk_debug("needs_reset=0x%x\n", needs_reset); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); if (needs_reset) { print_info("ht reset -\r\n"); @@ -186,7 +186,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now; */ - printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/amd/mahogany_fam10/acpi_tables.c b/src/mainboard/amd/mahogany_fam10/acpi_tables.c index 8e4c7a47dd..3a39165473 100644 --- a/src/mainboard/amd/mahogany_fam10/acpi_tables.c +++ b/src/mainboard/amd/mahogany_fam10/acpi_tables.c @@ -38,9 +38,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); } print_debug("\n"); } @@ -140,7 +140,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -158,7 +158,7 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * HPET at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); @@ -166,7 +166,7 @@ unsigned long write_acpi_tables(unsigned long start) /* If we want to use HPET Timers Linux wants an MADT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * MADT at %lx\n",current); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; @@ -174,7 +174,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SRAT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * SRAT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current+=srat->header.length; @@ -182,7 +182,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * SLIT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; @@ -190,7 +190,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ( current + 0x0f) & -0x10; - printk_debug("ACPI: * SSDT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); ssdt = (acpi_header_t *)current; current += ((acpi_header_t *)AmlCode_ssdt)->length; memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length); @@ -201,7 +201,7 @@ unsigned long write_acpi_tables(unsigned long start) ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); acpi_add_table(rsdp,ssdt); - printk_debug("ACPI: * SSDT for PState at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); current = acpi_add_ssdt_pstates(rsdp, current); #if 0 //CONFIG_ACPI_SSDTX_NUM >= 1 @@ -219,7 +219,7 @@ unsigned long write_acpi_tables(unsigned long start) c = (u8) ('A' + i - 1 - 6); } current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt ssdtx = (acpi_header_t *)current; switch(sysconf.hcid[i]) { case 1: @@ -246,23 +246,23 @@ unsigned long write_acpi_tables(unsigned long start) /* DSDT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * DSDT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); dsdt = (acpi_header_t *)current; // it will used by fadt current += ((acpi_header_t *)AmlCode)->length; memcpy((void *)dsdt,(void *)AmlCode, \ ((acpi_header_t *)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); /* FACS */ // it needs 64 bit alignment current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * FACS at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); facs = (acpi_facs_t *) current; // it will be used by fadt current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* FDAT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * FADT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -270,29 +270,29 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp,fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/amd/mahogany_fam10/apc_auto.c b/src/mainboard/amd/mahogany_fam10/apc_auto.c index f8f12855d2..1b19a660d4 100644 --- a/src/mainboard/amd/mahogany_fam10/apc_auto.c +++ b/src/mainboard/amd/mahogany_fam10/apc_auto.c @@ -80,7 +80,7 @@ void hardwaremain(int ret_addr) id = get_node_core_id_x(); - printk_debug("CODE IN CACHE ON NODE: %02x\n"); + printk(BIOS_DEBUG, "CODE IN CACHE ON NODE: %02x\n"); train_ram(id.nodeid, sysinfo, sysinfox); diff --git a/src/mainboard/amd/mahogany_fam10/fadt.c b/src/mainboard/amd/mahogany_fam10/fadt.c index e4b0db0ed9..962273b446 100644 --- a/src/mainboard/amd/mahogany_fam10/fadt.c +++ b/src/mainboard/amd/mahogany_fam10/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/amd/mahogany_fam10/irq_tables.c b/src/mainboard/amd/mahogany_fam10/irq_tables.c index 0f2375af87..2ea7de11a2 100644 --- a/src/mainboard/amd/mahogany_fam10/irq_tables.c +++ b/src/mainboard/amd/mahogany_fam10/irq_tables.c @@ -67,7 +67,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -107,7 +107,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/amd/mahogany_fam10/mainboard.c b/src/mainboard/amd/mahogany_fam10/mainboard.c index 47c153cf0a..73ff5198ee 100644 --- a/src/mainboard/amd/mahogany_fam10/mainboard.c +++ b/src/mainboard/amd/mahogany_fam10/mainboard.c @@ -101,21 +101,21 @@ void mahogany_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard MAHOGANY Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info - ("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk + (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info - ("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk + (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); /* refer to UMA Size Consideration in 780 BDG. */ @@ -134,7 +134,7 @@ void mahogany_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -153,7 +153,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_start=0x%x, uma_memory_size=0x%x \n", + printk(BIOS_INFO, "uma_memory_start=0x%x, uma_memory_size=0x%x \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/amd/mahogany_fam10/mptable.c b/src/mainboard/amd/mahogany_fam10/mptable.c index d5996abdad..92c6e275a0 100644 --- a/src/mainboard/amd/mahogany_fam10/mptable.c +++ b/src/mainboard/amd/mahogany_fam10/mptable.c @@ -206,7 +206,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c index eb0adc5fc8..d0d057c9d7 100644 --- a/src/mainboard/amd/mahogany_fam10/romstage.c +++ b/src/mainboard/amd/mahogany_fam10/romstage.c @@ -72,9 +72,9 @@ static void post_code(u8 value) { #if 0 void die(const char *msg); int do_printk(int msg_level, const char *fmt, ...) __attribute__((format(printf, 2, 3))); -#define printk_emerg(fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) +#define printk(BIOS_EMERG, fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) #endif -#define printk_info(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) +#define printk(BIOS_INFO, fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) #include "cpu/x86/bist.h" @@ -174,7 +174,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) it8718f_enable_serial(0, CONFIG_TTYS0_BASE); uart_init(); console_init(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); // dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); @@ -183,10 +183,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) // Load MPB val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x \n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x \n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x \n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -217,7 +217,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); wait_all_other_cores_started(bsp_apicid); @@ -231,7 +231,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only need to be done once.*/ @@ -249,7 +249,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); #endif rs780_htinit(); @@ -264,7 +264,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) post_code(0x3B); /* It's the time to set ctrl in sysinfo now; */ - printk_debug("fill_mem_ctrl()\n"); + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); @@ -273,7 +273,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) // die("Die Before MCT init."); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); @@ -294,7 +294,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) sb700_before_pci_init(); post_code(0x42); - printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x43); // Should never see this post code. } diff --git a/src/mainboard/amd/norwich/mainboard.c b/src/mainboard/amd/norwich/mainboard.c index e86720672d..0814a16f7f 100644 --- a/src/mainboard/amd/norwich/mainboard.c +++ b/src/mainboard/amd/norwich/mainboard.c @@ -23,8 +23,8 @@ static void init(struct device *dev) { - printk_debug("Norwich ENTER %s\n", __func__); - printk_debug("Norwich EXIT %s\n", __func__); + printk(BIOS_DEBUG, "Norwich ENTER %s\n", __func__); + printk(BIOS_DEBUG, "Norwich EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/amd/pistachio/acpi_tables.c b/src/mainboard/amd/pistachio/acpi_tables.c index 9b2377c68a..f37c89b739 100644 --- a/src/mainboard/amd/pistachio/acpi_tables.c +++ b/src/mainboard/amd/pistachio/acpi_tables.c @@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for (i = start; i < end; i++) { if ((i & 0xf) == 0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start) #if 0 /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current += slit->header.length; @@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start) } else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; ssdtx = (acpi_header_t *) current; switch (sysconf.hcid[i]) { @@ -243,21 +243,21 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -265,28 +265,28 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/amd/pistachio/fadt.c b/src/mainboard/amd/pistachio/fadt.c index e7bc017bbd..5d28790b4d 100644 --- a/src/mainboard/amd/pistachio/fadt.c +++ b/src/mainboard/amd/pistachio/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/amd/pistachio/irq_tables.c b/src/mainboard/amd/pistachio/irq_tables.c index c31ed2f910..9e42e53c58 100644 --- a/src/mainboard/amd/pistachio/irq_tables.c +++ b/src/mainboard/amd/pistachio/irq_tables.c @@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/amd/pistachio/mainboard.c b/src/mainboard/amd/pistachio/mainboard.c index 090f9b7dc3..6688f06934 100644 --- a/src/mainboard/amd/pistachio/mainboard.c +++ b/src/mainboard/amd/pistachio/mainboard.c @@ -61,7 +61,7 @@ static void enable_onboard_nic() { u8 byte; - printk_info("%s.\n", __func__); + printk(BIOS_INFO, "%s.\n", __func__); /* enable GPM8 output */ byte = pm_ioread(0x95); @@ -155,7 +155,7 @@ static void set_thermal_config() /* remote 1 temperature offset */ ADT7475_write_byte(0x70, 0x00); - printk_info("Init adt7475 end , status 0x42 %02x, status 0x41 %02x\n", + printk(BIOS_INFO, "Init adt7475 end , status 0x42 %02x, status 0x41 %02x\n", byte2, byte); /* sb600 setting for thermal config. Set SB600 GPM5 to trigger ACPI event */ @@ -261,19 +261,19 @@ void pistachio_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard Pistachio Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard Pistachio Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -295,7 +295,7 @@ void pistachio_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -315,7 +315,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/amd/pistachio/mptable.c b/src/mainboard/amd/pistachio/mptable.c index 80ff410a7c..c1e2f4e314 100644 --- a/src/mainboard/amd/pistachio/mptable.c +++ b/src/mainboard/amd/pistachio/mptable.c @@ -199,7 +199,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c index 3af55eed92..1b98ab42b5 100644 --- a/src/mainboard/amd/pistachio/romstage.c +++ b/src/mainboard/amd/pistachio/romstage.c @@ -132,7 +132,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); setup_pistachio_resource_map(); @@ -162,7 +162,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Read FIDVID_STATUS */ msr=rdmsr(0xc0010042); - printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); enable_fid_change(); enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); @@ -170,10 +170,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010042); - printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); } else { - printk_debug("Changing FIDVID not supported\n"); + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); } post_code(0x05); @@ -181,7 +181,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); - printk_debug("needs_reset=0x%x\n", needs_reset); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); post_code(0x06); @@ -193,7 +193,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now; */ - printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); diff --git a/src/mainboard/amd/rumba/mainboard.c b/src/mainboard/amd/rumba/mainboard.c index 843f71b071..adb1786678 100644 --- a/src/mainboard/amd/rumba/mainboard.c +++ b/src/mainboard/amd/rumba/mainboard.c @@ -16,19 +16,19 @@ static void init(struct device *dev) { if (mainboard->nicirq) nicirq = mainboard->nicirq; - printk_debug("AMD RUMBA ENTER %s\n", __func__); + printk(BIOS_DEBUG, "AMD RUMBA ENTER %s\n", __func__); if (nicirq) { - printk_debug("%s (%x,%x)SET PCI interrupt line to %d\n", + printk(BIOS_DEBUG, "%s (%x,%x)SET PCI interrupt line to %d\n", __func__, bus, devfn, nicirq); nic = dev_find_slot(bus, devfn); if (! nic){ - printk_err("Could not find NIC\n"); + printk(BIOS_ERR, "Could not find NIC\n"); } else { pci_write_config8(nic, PCI_INTERRUPT_LINE, nicirq); } } - printk_debug("AMD RUMBA EXIT %s\n", __func__); + printk(BIOS_DEBUG, "AMD RUMBA EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/amd/serengeti_cheetah/acpi_tables.c b/src/mainboard/amd/serengeti_cheetah/acpi_tables.c index a55ab640f3..15db99bed6 100644 --- a/src/mainboard/amd/serengeti_cheetah/acpi_tables.c +++ b/src/mainboard/amd/serengeti_cheetah/acpi_tables.c @@ -30,9 +30,9 @@ static void dump_mem(unsigned start, unsigned end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); } print_debug("\n"); } @@ -208,7 +208,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f ) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -225,14 +225,14 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp,hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; @@ -240,21 +240,21 @@ unsigned long write_acpi_tables(unsigned long start) /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current+=srat->header.length; acpi_add_table(rsdp,srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -274,7 +274,7 @@ unsigned long write_acpi_tables(unsigned long start) else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt current = ( current + 0x07) & -0x08; ssdtx = (acpi_header_t *)current; switch(sysconf.hcid[i]) { @@ -300,21 +300,21 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *)current; current += ((acpi_header_t *)AmlCode)->length; memcpy((void *)dsdt,(void *)AmlCode, \ ((acpi_header_t *)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); /* FDAT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -322,29 +322,29 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp,fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/amd/serengeti_cheetah/ap_romstage.c b/src/mainboard/amd/serengeti_cheetah/ap_romstage.c index 6abebffe13..4b8e2fe06d 100644 --- a/src/mainboard/amd/serengeti_cheetah/ap_romstage.c +++ b/src/mainboard/amd/serengeti_cheetah/ap_romstage.c @@ -82,7 +82,7 @@ void hardwaremain(int ret_addr) id = get_node_core_id_x(); #if CONFIG_USE_PRINTK_IN_CAR - printk_debug("CODE IN CACHE ON NODE: %02x\n"); + printk(BIOS_DEBUG, "CODE IN CACHE ON NODE: %02x\n"); #else print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); #endif diff --git a/src/mainboard/amd/serengeti_cheetah/fadt.c b/src/mainboard/amd/serengeti_cheetah/fadt.c index ef33100697..d4c6622847 100644 --- a/src/mainboard/amd/serengeti_cheetah/fadt.c +++ b/src/mainboard/amd/serengeti_cheetah/fadt.c @@ -13,7 +13,7 @@ void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ acpi_header_t *header=&(fadt->header); - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt,0,sizeof(acpi_fadt_t)); diff --git a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c index cd580f1232..c7d19adbbb 100644 --- a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c +++ b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c @@ -112,11 +112,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); } /* 8132-1 */ @@ -125,7 +125,7 @@ void get_bus_conf(void) m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); } /* 8132-2 */ @@ -135,11 +135,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); } /* HT chain 1 */ @@ -165,7 +165,7 @@ void get_bus_conf(void) m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); } /* 8132-2 */ @@ -174,10 +174,10 @@ void get_bus_conf(void) m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS); m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; - // printk_debug("bus_isa=%d\n",bus_isa); + // printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); } break; @@ -191,12 +191,12 @@ void get_bus_conf(void) if (dev) { m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - // printk_debug("bus_8151_1=%d\n",bus_8151[j][1]); + // printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151[j][1]); m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); } break; diff --git a/src/mainboard/amd/serengeti_cheetah/irq_tables.c b/src/mainboard/amd/serengeti_cheetah/irq_tables.c index 97676f3c70..7d6f66bb96 100644 --- a/src/mainboard/amd/serengeti_cheetah/irq_tables.c +++ b/src/mainboard/amd/serengeti_cheetah/irq_tables.c @@ -58,7 +58,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -98,13 +98,13 @@ unsigned long write_pirq_routing_table(unsigned long addr) } //pci bridge - printk_debug("setting Onboard AMD Southbridge \n"); + printk(BIOS_DEBUG, "setting Onboard AMD Southbridge \n"); static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 }; pci_assign_irqs(m->bus_8111_0, sysconf.sbdn+1, slotIrqs_1_4); write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard AMD USB \n"); + printk(BIOS_DEBUG, "setting Onboard AMD USB \n"); static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11}; pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0); write_pirq_info(pirq_info, m->bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); @@ -138,7 +138,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/amd/serengeti_cheetah/mptable.c b/src/mainboard/amd/serengeti_cheetah/mptable.c index 9b8cbec2cd..88c34df155 100644 --- a/src/mainboard/amd/serengeti_cheetah/mptable.c +++ b/src/mainboard/amd/serengeti_cheetah/mptable.c @@ -199,7 +199,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c b/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c index 853e50535f..d3a274eca6 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c @@ -38,9 +38,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); } print_debug("\n"); } @@ -212,7 +212,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -230,7 +230,7 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * HPET at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); @@ -238,7 +238,7 @@ unsigned long write_acpi_tables(unsigned long start) /* If we want to use HPET Timers Linux wants an MADT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * MADT at %lx\n",current); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; @@ -246,7 +246,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SRAT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * SRAT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current+=srat->header.length; @@ -254,7 +254,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * SLIT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; @@ -262,7 +262,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ( current + 0x0f) & -0x10; - printk_debug("ACPI: * SSDT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); ssdt = (acpi_header_t *)current; current += ((acpi_header_t *)AmlCode_ssdt)->length; memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length); @@ -273,7 +273,7 @@ unsigned long write_acpi_tables(unsigned long start) ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); acpi_add_table(rsdp,ssdt); - printk_debug("ACPI: * SSDT for PState at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); current = acpi_add_ssdt_pstates(rsdp, current); #if CONFIG_ACPI_SSDTX_NUM >= 1 @@ -291,7 +291,7 @@ unsigned long write_acpi_tables(unsigned long start) c = (u8) ('A' + i - 1 - 6); } current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt ssdtx = (acpi_header_t *)current; switch(sysconf.hcid[i]) { case 1: @@ -318,23 +318,23 @@ unsigned long write_acpi_tables(unsigned long start) /* DSDT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * DSDT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); dsdt = (acpi_header_t *)current; // it will used by fadt current += ((acpi_header_t *)AmlCode)->length; memcpy((void *)dsdt,(void *)AmlCode, \ ((acpi_header_t *)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); /* FACS */ // it needs 64 bit alignment current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * FACS at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); facs = (acpi_facs_t *) current; // it will be used by fadt current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* FDAT */ current = ( current + 0x07) & -0x08; - printk_debug("ACPI: * FADT at %lx\n", current); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -342,29 +342,29 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp,fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/ap_romstage.c b/src/mainboard/amd/serengeti_cheetah_fam10/ap_romstage.c index a62811a228..7d821e3bff 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/ap_romstage.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/ap_romstage.c @@ -80,7 +80,7 @@ void hardwaremain(int ret_addr) id = get_node_core_id_x(); - printk_debug("CODE IN CACHE ON NODE: %02x\n"); + printk(BIOS_DEBUG, "CODE IN CACHE ON NODE: %02x\n"); train_ram(id.nodeid, sysinfo, sysinfox); diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c b/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c index b7a4a17e12..414db7ae4a 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c @@ -34,7 +34,7 @@ void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ acpi_header_t *header=&(fadt->header); - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt,0,sizeof(acpi_fadt_t)); diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c index 0eae634fd1..8e3dcf1b84 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c @@ -133,7 +133,7 @@ void get_bus_conf(void) if (dev) { m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); } /* 8132-1 */ @@ -141,7 +141,7 @@ void get_bus_conf(void) if (dev) { m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); } /* 8132-2 */ @@ -149,7 +149,7 @@ void get_bus_conf(void) if (dev) { m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); } for(i=0; i< sysconf.hc_possible_num; i++) { @@ -161,7 +161,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /* HT chain 1 */ @@ -186,7 +186,7 @@ void get_bus_conf(void) if (dev) { m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); } /* 8132-2 */ @@ -194,7 +194,7 @@ void get_bus_conf(void) if (dev) { m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); } break; @@ -209,7 +209,7 @@ void get_bus_conf(void) if (dev) { m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); } break; diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c b/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c index de8eacde6b..7cd5945f95 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c @@ -70,7 +70,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (u8 *)(addr); @@ -137,7 +137,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c b/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c index 277f8808fd..72ded3e87d 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c @@ -224,7 +224,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c index b63dc1099b..7c8707f660 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c @@ -73,7 +73,7 @@ static void post_code(u8 value) { #if 0 void die(const char *msg); int do_printk(int msg_level, const char *fmt, ...) __attribute__((format(printf, 2, 3))); -#define printk_emerg(fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) +#define printk(BIOS_EMERG, fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) #endif #include "cpu/x86/bist.h" @@ -105,7 +105,7 @@ static void activate_spd_rom(const struct mem_controller *ctrl) int ret,i; u8 device = ctrl->spd_switch_addr; - printk_debug("switch i2c to : %02x for node %02x \n", device, ctrl->node_id); + printk(BIOS_DEBUG, "switch i2c to : %02x for node %02x \n", device, ctrl->node_id); /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ i=2; @@ -176,7 +176,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); // dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); @@ -185,10 +185,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) // Load MPB val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x \n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x \n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x \n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -219,7 +219,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); wait_all_other_cores_started(bsp_apicid); @@ -229,7 +229,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only need to be done once.*/ @@ -247,7 +247,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); #endif @@ -268,12 +268,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) post_code(0x3C); /* It's the time to set ctrl in sysinfo now; */ - printk_debug("fill_mem_ctrl()\n"); + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); - printk_debug("enable_smbus()\n"); + printk(BIOS_DEBUG, "enable_smbus()\n"); enable_smbus(); post_code(0x3E); @@ -283,7 +283,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) // die("Die Before MCT init."); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); @@ -302,7 +302,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) // die("After MCT init before CAR disabled."); post_code(0x42); - printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x43); // Should never see this post code. diff --git a/src/mainboard/arima/hdama/mptable.c b/src/mainboard/arima/hdama/mptable.c index 87de4c874a..5bad3922dc 100644 --- a/src/mainboard/arima/hdama/mptable.c +++ b/src/mainboard/arima/hdama/mptable.c @@ -80,7 +80,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -153,7 +153,7 @@ static void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0xff) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 0; } @@ -165,7 +165,7 @@ static void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_chain_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_chain_0); bus_8111_1 = 4; bus_isa = 5; @@ -177,7 +177,7 @@ static void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_chain_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_chain_0); bus_8131_1 = 2; } @@ -188,7 +188,7 @@ static void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_chain_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_chain_0); bus_8131_2 = 3; } @@ -313,7 +313,7 @@ static void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } @@ -329,26 +329,26 @@ static void reboot_if_hotswap(void) unsigned bus_chain_0 = node_link_to_bus(0, 0); reset = 0; - printk_debug("Looking for bad PCIX MHz input\n"); + printk(BIOS_DEBUG, "Looking for bad PCIX MHz input\n"); dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); if (!dev) - printk_debug("Couldn't find %02x:02.0 \n", bus_chain_0); + printk(BIOS_DEBUG, "Couldn't find %02x:02.0 \n", bus_chain_0); else { data = pci_read_config32(dev, 0xa0); if(!(((data>>16)&0x03)==0x03)) { reset=1; - printk_debug("Bad PCIX MHz - Reset\n"); + printk(BIOS_DEBUG, "Bad PCIX MHz - Reset\n"); } } - printk_debug("Looking for bad Hot Swap Enable\n"); + printk(BIOS_DEBUG, "Looking for bad Hot Swap Enable\n"); dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); if (!dev) - printk_debug("Couldn't find %02x:01.0 \n", bus_chain_0); + printk(BIOS_DEBUG, "Couldn't find %02x:01.0 \n", bus_chain_0); else { data = pci_read_config32(dev, 0x48); if(data & 0x0c) { reset=1; - printk_debug("Bad Hot Swap start - Reset\n"); + printk(BIOS_DEBUG, "Bad Hot Swap start - Reset\n"); } } if(reset) { @@ -363,7 +363,7 @@ static void reboot_if_hotswap(void) outb(0x0e, 0x0cf9); } else { - printk_debug("OK 133MHz & Hot Swap is off\n"); + printk(BIOS_DEBUG, "OK 133MHz & Hot Swap is off\n"); } } diff --git a/src/mainboard/artecgroup/dbe61/mainboard.c b/src/mainboard/artecgroup/dbe61/mainboard.c index 49c27b3b6e..d88190803b 100644 --- a/src/mainboard/artecgroup/dbe61/mainboard.c +++ b/src/mainboard/artecgroup/dbe61/mainboard.c @@ -31,20 +31,20 @@ static void init_gpio() { msr_t msr; - printk_debug("Checking GPIO module...\n"); + printk(BIOS_DEBUG, "Checking GPIO module...\n"); msr = rdmsr(MDD_LBAR_GPIO); - printk_debug("DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo); } static void init(struct device *dev) { // BOARD-SPECIFIC INIT - printk_debug("ARTECGROUP DBE61 ENTER %s\n", __func__); + printk(BIOS_DEBUG, "ARTECGROUP DBE61 ENTER %s\n", __func__); init_gpio(); - printk_debug("ARTECGROUP DBE61 EXIT %s\n", __func__); + printk(BIOS_DEBUG, "ARTECGROUP DBE61 EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/artecgroup/dbe61/realmode/vgabios.c b/src/mainboard/artecgroup/dbe61/realmode/vgabios.c index 1a9dced09e..596757a076 100644 --- a/src/mainboard/artecgroup/dbe61/realmode/vgabios.c +++ b/src/mainboard/artecgroup/dbe61/realmode/vgabios.c @@ -248,16 +248,16 @@ void do_vgabios(device_t dev) } if (!dev) { - printk_debug("NO VGA FOUND\n"); + printk(BIOS_DEBUG, "NO VGA FOUND\n"); return; } - printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + printk(BIOS_DEBUG, "found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); /* declare rom address here - keep any config data out of the way * of core LXB stuff */ //pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1); - printk_debug("rom base, size: %x\n", rom); + printk(BIOS_DEBUG, "rom base, size: %x\n", rom); buf = (unsigned char *) rom; if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { @@ -269,13 +269,13 @@ void do_vgabios(device_t dev) buf = (unsigned char *) 0xc0000; if (buf[0]==0x55 && buf[1]==0xAA) { busdevfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; - printk_debug("bus/devfn = %#x\n", busdevfn); + printk(BIOS_DEBUG, "bus/devfn = %#x\n", busdevfn); real_mode_switch_call_vga(busdevfn); } else - printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + printk(BIOS_DEBUG, "Failed to copy VGA BIOS to 0xc0000\n"); } else - printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + printk(BIOS_DEBUG, "BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); pci_write_config32(dev, PCI_ROM_ADDRESS, 0); } @@ -579,28 +579,28 @@ int biosint_vga(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); // cases in a good compiler are just as good as your own tables. switch (intnumber) { case 0 ... 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception %u\n", intnumber); + printk(BIOS_INFO, "biosint: Oops, exception %u\n", intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *) esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *) esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out\n"); + printk(BIOS_DEBUG, "biosint: Bailing out\n"); // "longjmp" vga_exit(); break; @@ -619,7 +619,7 @@ int biosint_vga(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupport int #0x%x\n", + printk(BIOS_INFO, "BIOSINT: Unsupport int #0x%x\n", intnumber); break; } @@ -697,7 +697,7 @@ pcibios_vga(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, busdevfn); + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; } else { @@ -723,7 +723,7 @@ pcibios_vga(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (! dev) { - printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; retval = -1; @@ -757,14 +757,14 @@ pcibios_vga(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } @@ -891,9 +891,9 @@ static void vga_init(device_t dev) pci_dev_init(dev); // code to make vga init run in real mode - does work but against the current coreboot philosophy - printk_debug("INSTALL REAL-MODE IDT\n"); + printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); - printk_debug("DO THE VGA BIOS\n"); + printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); do_vgabios(dev); vga_enable_console(); @@ -918,7 +918,7 @@ static struct device_operations drivers_pci_realmode_dev_ops = { * */ void vga_configure_pci(device_t dev){ - printk_debug("Setting VGA callback\n"); + printk(BIOS_DEBUG, "Setting VGA callback\n"); dev->ops = &drivers_pci_realmode_dev_ops; } diff --git a/src/mainboard/asus/a8n_e/get_bus_conf.c b/src/mainboard/asus/a8n_e/get_bus_conf.c index 8e4edb4750..bcc34ffa59 100644 --- a/src/mainboard/asus/a8n_e/get_bus_conf.c +++ b/src/mainboard/asus/a8n_e/get_bus_conf.c @@ -107,8 +107,8 @@ void get_bus_conf(void) bus_ck804[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_ck804[2]++; } else { - printk_debug - ("ERROR - could not find PCI 1:%02x.0, using defaults\n", + printk + (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804[1] = 2; bus_ck804[2] = 3; @@ -124,7 +124,7 @@ void get_bus_conf(void) for (j = bus_ck804[i]; j < bus_isa; j++) bus_type[j] = 1; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804[0], sbdn + 0x0b + i - 2); bus_isa = bus_ck804[i - 1] + 1; } diff --git a/src/mainboard/asus/a8n_e/irq_tables.c b/src/mainboard/asus/a8n_e/irq_tables.c index 4c9417fdc4..eeea8d0c27 100644 --- a/src/mainboard/asus/a8n_e/irq_tables.c +++ b/src/mainboard/asus/a8n_e/irq_tables.c @@ -78,7 +78,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000. */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -191,7 +191,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) if (sum != pirq->checksum) pirq->checksum = sum; - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/asus/a8n_e/mptable.c b/src/mainboard/asus/a8n_e/mptable.c index 9fe1f60aa8..ebfe7efa6b 100644 --- a/src/mainboard/asus/a8n_e/mptable.c +++ b/src/mainboard/asus/a8n_e/mptable.c @@ -184,7 +184,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/asus/a8v-e_se/acpi_tables.c b/src/mainboard/asus/a8v-e_se/acpi_tables.c index 80b024dc53..9611872aec 100644 --- a/src/mainboard/asus/a8v-e_se/acpi_tables.c +++ b/src/mainboard/asus/a8v-e_se/acpi_tables.c @@ -97,7 +97,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT table. */ rsdp = (acpi_rsdp_t *) current; @@ -112,7 +112,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_write_rsdt(rsdt); /* We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); @@ -123,9 +123,9 @@ unsigned long write_acpi_tables(unsigned long start) ((acpi_header_t *) AmlCode)->length); dsdt->checksum = 0; /* Don't trust iasl to get this right. */ dsdt->checksum = acpi_checksum(dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -134,23 +134,23 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); /* If we want to use HPET timers Linux wants it in MADT. */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/asus/m2v-mx_se/acpi_tables.c b/src/mainboard/asus/m2v-mx_se/acpi_tables.c index 81f6255197..100de69c9d 100644 --- a/src/mainboard/asus/m2v-mx_se/acpi_tables.c +++ b/src/mainboard/asus/m2v-mx_se/acpi_tables.c @@ -108,7 +108,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT table. */ rsdp = (acpi_rsdp_t *) current; @@ -123,7 +123,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_write_rsdt(rsdt); /* We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); /* we should align FACS to 64B as per ACPI specs */ @@ -138,9 +138,9 @@ unsigned long write_acpi_tables(unsigned long start) ((acpi_header_t *) AmlCode)->length); dsdt->checksum = 0; /* Don't trust iasl to get this right. */ dsdt->checksum = acpi_checksum(dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -148,46 +148,46 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); /* If we want to use HPET timers Linux wants an MADT. */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/asus/p2b-d/mptable.c b/src/mainboard/asus/p2b-d/mptable.c index 5635c8b884..03bc613031 100644 --- a/src/mainboard/asus/p2b-d/mptable.c +++ b/src/mainboard/asus/p2b-d/mptable.c @@ -144,7 +144,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/asus/p2b-ds/mptable.c b/src/mainboard/asus/p2b-ds/mptable.c index 22aa0a59ae..e5bfdcd3a7 100644 --- a/src/mainboard/asus/p2b-ds/mptable.c +++ b/src/mainboard/asus/p2b-ds/mptable.c @@ -146,7 +146,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/broadcom/blast/get_bus_conf.c b/src/mainboard/broadcom/blast/get_bus_conf.c index b86292b0db..cfe5257080 100644 --- a/src/mainboard/broadcom/blast/get_bus_conf.c +++ b/src/mainboard/broadcom/blast/get_bus_conf.c @@ -86,12 +86,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } } else { - printk_debug("ERROR - could not find PCI %02x:07.0, using defaults\n", bus_bcm5785_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:07.0, using defaults\n", bus_bcm5785_0); } /* bcm5780 */ @@ -102,12 +102,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_bcm5780[i]); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_bcm5780[i]); } } diff --git a/src/mainboard/broadcom/blast/irq_tables.c b/src/mainboard/broadcom/blast/irq_tables.c index 3f9adebec3..0bc556c967 100644 --- a/src/mainboard/broadcom/blast/irq_tables.c +++ b/src/mainboard/broadcom/blast/irq_tables.c @@ -60,7 +60,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -99,7 +99,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/broadcom/blast/mptable.c b/src/mainboard/broadcom/blast/mptable.c index d754cb7101..497ac464fc 100644 --- a/src/mainboard/broadcom/blast/mptable.c +++ b/src/mainboard/broadcom/blast/mptable.c @@ -177,7 +177,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/dell/s1850/mptable.c b/src/mainboard/dell/s1850/mptable.c index 3e5985cc1d..835d32f81e 100644 --- a/src/mainboard/dell/s1850/mptable.c +++ b/src/mainboard/dell/s1850/mptable.c @@ -48,7 +48,7 @@ static void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_ich5r_1 = 7; bus_isa = 8; @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.0, using defaults\n"); bus_pxhd_1 = 2; } @@ -71,7 +71,7 @@ static void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.2, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.2, using defaults\n"); bus_pxhd_2 = 3; } @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 0:04.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:04.0, using defaults\n"); bus_pxhd_3 = 5; } @@ -94,7 +94,7 @@ static void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 0:06.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:06.0, using defaults\n"); bus_pxhd_4 = 6; } @@ -122,7 +122,7 @@ static void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.1\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n"); } /* pxhd apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); @@ -133,7 +133,7 @@ static void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.3\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n"); } } /* ISA backward compatibility interrupts */ @@ -205,7 +205,7 @@ static void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c index d9d3b14dff..cfc1a21ca3 100644 --- a/src/mainboard/digitallogic/msm586seg/mainboard.c +++ b/src/mainboard/digitallogic/msm586seg/mainboard.c @@ -23,10 +23,10 @@ static void irqdump() -1}; mmcr = (void *) 0xfffef000; - printk_err("mmcr is %p\n", mmcr); + printk(BIOS_ERR, "mmcr is %p\n", mmcr); for(i = 0; irqlist[i] >= 0; i++) { irq = mmcr + irqlist[i]; - printk_err("0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq); + printk(BIOS_ERR, "0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq); } } @@ -43,7 +43,7 @@ static void enable_dev(struct device *dev) { */ /* currently, nothing in the device to use, so ignore it. */ - printk_err("digital logic msm586 seg ENTER %s\n", __func__); + printk(BIOS_ERR, "digital logic msm586 seg ENTER %s\n", __func__); /* from fuctory bios */ @@ -77,10 +77,10 @@ static void enable_dev(struct device *dev) { irqdump(); - printk_err("uart 1 ctl is 0x%x\n", *(unsigned char *) 0xfffefcc0); + printk(BIOS_ERR, "uart 1 ctl is 0x%x\n", *(unsigned char *) 0xfffefcc0); - printk_err("0xc20 ctl is 0x%x\n", *(unsigned short *) 0xfffefc20); - printk_err("0xc22 0x%x\n", *(unsigned short *) 0xfffefc22b); + printk(BIOS_ERR, "0xc20 ctl is 0x%x\n", *(unsigned short *) 0xfffefc20); + printk(BIOS_ERR, "0xc22 0x%x\n", *(unsigned short *) 0xfffefc22b); /* The following block has NOT proven sufficient to get * the VGA hardware to talk to us @@ -92,7 +92,7 @@ static void enable_dev(struct device *dev) { mmcr->sysarb.prictl = 0xc0000f0f; /* this is bios setting, depends on sysarb above */ mmcr->hostbridge.ctl = 0x108; - printk_err("digital logic msm586 seg EXIT %s\n", __func__); + printk(BIOS_ERR, "digital logic msm586 seg EXIT %s\n", __func__); /* pio */ mmcr->pio.data31_16 = 0xffbf; diff --git a/src/mainboard/digitallogic/msm800sev/mainboard.c b/src/mainboard/digitallogic/msm800sev/mainboard.c index 2d3c3c4b51..f4d0e0e8fc 100644 --- a/src/mainboard/digitallogic/msm800sev/mainboard.c +++ b/src/mainboard/digitallogic/msm800sev/mainboard.c @@ -23,8 +23,8 @@ static void init(struct device *dev) { - printk_debug("MSM800SEV ENTER %s\n", __func__); - printk_debug("MSM800SEV EXIT %s\n", __func__); + printk(BIOS_DEBUG, "MSM800SEV ENTER %s\n", __func__); + printk(BIOS_DEBUG, "MSM800SEV EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/emulation/qemu-x86/mainboard.c b/src/mainboard/emulation/qemu-x86/mainboard.c index 05bf2f391b..be17698d7d 100644 --- a/src/mainboard/emulation/qemu-x86/mainboard.c +++ b/src/mainboard/emulation/qemu-x86/mainboard.c @@ -28,7 +28,7 @@ static void qemu_init(device_t dev) /* The PIRQ table is not working well for interrupt routing purposes. * so we'll just set the IRQ directly. */ - printk_info("setting ethernet\n"); + printk(BIOS_INFO, "setting ethernet\n"); pci_assign_irqs(0, 3, enetIrqs); } diff --git a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c index 08171d36a6..3746918dd3 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c @@ -117,7 +117,7 @@ void get_bus_conf(void) for(j=bus_sis966[1];j<bus_sis966[2]; j++) bus_type[j] = 1; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); bus_sis966[1] = 2; bus_sis966[2] = 3; @@ -132,7 +132,7 @@ void get_bus_conf(void) for(j=bus_sis966[i];j<bus_isa; j++) bus_type[j] = 1; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_sis966[0], sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_sis966[0], sbdn + 0x0a + i - 2 ); bus_isa = bus_sis966[i-1]+1; } } diff --git a/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c b/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c index 6652e0fdad..de9a5a04d6 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c @@ -77,7 +77,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -114,7 +114,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); { device_t dev; @@ -141,7 +141,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pci_write_config8(dev, reg[i], irq[i]); } // endif - printk_debug("Setting Onboard SiS Southbridge\n"); + printk(BIOS_DEBUG, "Setting Onboard SiS Southbridge\n"); dev = dev_find_slot(0, PCI_DEVFN(2,5)); // 5513 (IDE) pci_write_config8(dev, 0x3C, 0x0A); @@ -163,9 +163,9 @@ unsigned long write_pirq_routing_table(unsigned long addr) pci_write_config8(dev, 0x3C, 0x05); } - printk_debug("pirq routing table, size=%d\n", pirq->size); + printk(BIOS_DEBUG, "pirq routing table, size=%d\n", pirq->size); for (i = 0; i < pirq->size; i+=4) - printk_debug("%.2x%.2x%.2x%.2x\n", v[i+3],v[i+2],v[i+1],v[i]); + printk(BIOS_DEBUG, "%.2x%.2x%.2x%.2x\n", v[i+3],v[i+2],v[i+1],v[i]); return (unsigned long) pirq_info; diff --git a/src/mainboard/gigabyte/ga_2761gxdk/mptable.c b/src/mainboard/gigabyte/ga_2761gxdk/mptable.c index 558cac50a3..c765a56402 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/mptable.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/mptable.c @@ -156,7 +156,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/gigabyte/m57sli/acpi_tables.c b/src/mainboard/gigabyte/m57sli/acpi_tables.c index 1e3d28c00a..cba08e585e 100644 --- a/src/mainboard/gigabyte/m57sli/acpi_tables.c +++ b/src/mainboard/gigabyte/m57sli/acpi_tables.c @@ -119,7 +119,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT table. */ rsdp = (acpi_rsdp_t *) current; @@ -134,7 +134,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_write_rsdt(rsdt); /* We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); /* we should align FACS to 64B as per ACPI specs */ current = ALIGN(current, 64); @@ -148,9 +148,9 @@ unsigned long write_acpi_tables(unsigned long start) ((acpi_header_t *) AmlCode)->length); dsdt->checksum = 0; /* Don't trust iasl to get this right. */ dsdt->checksum = acpi_checksum(dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -158,46 +158,46 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); /* If we want to use HPET timers Linux wants an MADT. */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp, slit); /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/gigabyte/m57sli/get_bus_conf.c b/src/mainboard/gigabyte/m57sli/get_bus_conf.c index 7076960298..9e5a1b09a1 100644 --- a/src/mainboard/gigabyte/m57sli/get_bus_conf.c +++ b/src/mainboard/gigabyte/m57sli/get_bus_conf.c @@ -115,7 +115,7 @@ void get_bus_conf(void) for(j=bus_mcp55[1];j<bus_mcp55[2]; j++) bus_type[j] = 1; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); bus_mcp55[1] = 2; bus_mcp55[2] = 3; @@ -130,7 +130,7 @@ void get_bus_conf(void) for(j=bus_mcp55[i];j<bus_isa; j++) bus_type[j] = 1; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); bus_isa = bus_mcp55[i-1]+1; } } diff --git a/src/mainboard/gigabyte/m57sli/irq_tables.c b/src/mainboard/gigabyte/m57sli/irq_tables.c index 49c7c99b22..4aaf1497f0 100644 --- a/src/mainboard/gigabyte/m57sli/irq_tables.c +++ b/src/mainboard/gigabyte/m57sli/irq_tables.c @@ -75,7 +75,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -112,7 +112,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/gigabyte/m57sli/mptable.c b/src/mainboard/gigabyte/m57sli/mptable.c index ba8ab7f7e0..9002facd43 100644 --- a/src/mainboard/gigabyte/m57sli/mptable.c +++ b/src/mainboard/gigabyte/m57sli/mptable.c @@ -164,7 +164,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/hp/dl145_g3/get_bus_conf.c b/src/mainboard/hp/dl145_g3/get_bus_conf.c index 65a0eb9796..cace2d1ea0 100644 --- a/src/mainboard/hp/dl145_g3/get_bus_conf.c +++ b/src/mainboard/hp/dl145_g3/get_bus_conf.c @@ -98,25 +98,25 @@ void get_bus_conf(void) m->bus_bcm5780[0] = m->bus_bcm5785_0; /* bcm5785 */ - printk_debug("search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); + printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { - printk_debug("found dev %s...\n",dev_path(dev)); + printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev)); m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk_debug("secondary is %d...\n",m->bus_bcm5785_1); + printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1); dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); - printk_debug("now found %s...\n",dev_path(dev)); + printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev)); if(dev) { m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; - printk_debug("bus_isa 1=%d\n",m->bus_isa); + printk(BIOS_DEBUG, "bus_isa 1=%d\n",m->bus_isa); #endif } } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); } /* bcm5780 */ @@ -127,12 +127,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; - printk_debug("bus_isa 2=%d\n",m->bus_isa); + printk(BIOS_DEBUG, "bus_isa 2=%d\n",m->bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); } } diff --git a/src/mainboard/hp/dl145_g3/mptable.c b/src/mainboard/hp/dl145_g3/mptable.c index 22715394ab..aef2bf978a 100644 --- a/src/mainboard/hp/dl145_g3/mptable.c +++ b/src/mainboard/hp/dl145_g3/mptable.c @@ -80,7 +80,7 @@ void *smp_write_config_table(void *v) /* define bus and isa numbers */ /* for(bus_num = 0; bus_num < m->bus_isa; bus_num++) { smp_write_bus(mc, bus_num, "PCI "); - printk_debug("writing bus %d as PCI...\n",bus_num); + printk(BIOS_DEBUG, "writing bus %d as PCI...\n",bus_num); } */ smp_write_bus(mc, 0, "PCI "); @@ -89,7 +89,7 @@ void *smp_write_config_table(void *v) smp_write_bus(mc, 8, "PCI "); smp_write_bus(mc,m->bus_isa, "ISA "); - printk_debug("writing %d as ISA...\n",m->bus_isa); + printk(BIOS_DEBUG, "writing %d as ISA...\n",m->bus_isa); /*I/O APICs: APIC ID Version State Address*/ { @@ -101,7 +101,7 @@ void *smp_write_config_table(void *v) if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { - printk_debug("APIC %d base address: %x\n",m->apicid_bcm5785[i], res->base); + printk(BIOS_DEBUG, "APIC %d base address: %x\n",m->apicid_bcm5785[i], res->base); smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); } } @@ -160,14 +160,14 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x5, m->apicid_bcm5785[0], 0x5); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_bcm5785[0], 0x6); //SATA -/* printk_debug("MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ +/* printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ /* smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ - printk_debug("MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); + printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_bcm5785[0], 0x8); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x9, m->apicid_bcm5785[0], 0x9); //USB - printk_debug("sysconf.sbdn: %d on bus: %x \n",sysconf.sbdn, m->bus_bcm5785_0); + printk(BIOS_DEBUG, "sysconf.sbdn: %d on bus: %x \n",sysconf.sbdn, m->bus_bcm5785_0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x03<<2)|0, m->apicid_bcm5785[0], 0xa); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xb, m->apicid_bcm5785[0], 0xb); @@ -188,7 +188,7 @@ void *smp_write_config_table(void *v) //IDE // outb(0x02, 0xc00); outb(0x0e, 0xc01); -// printk_debug("MPTABLE_IDE: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); +// printk(BIOS_DEBUG, "MPTABLE_IDE: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, (0x02<<2)|1, m->apicid_bcm5785[0], 0xe); //onboard Broadcom GbE @@ -206,13 +206,13 @@ void *smp_write_config_table(void *v) uint32_t dword; dword = pci_read_config32(dev, 0x6c); dword |= (1<<4); // enable interrupts - printk_debug("6ch: %x\n",dword); + printk(BIOS_DEBUG, "6ch: %x\n",dword); pci_write_config32(dev, 0x6c, dword); } } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - printk_debug("m->bus_isa is: %x\n",m->bus_isa); + printk(BIOS_DEBUG, "m->bus_isa is: %x\n",m->bus_isa); smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa , 0x0, MP_APIC_ALL, 0x1); @@ -231,7 +231,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/ibm/e325/mptable.c b/src/mainboard/ibm/e325/mptable.c index 6ad8b945b4..dc5cc429bf 100644 --- a/src/mainboard/ibm/e325/mptable.c +++ b/src/mainboard/ibm/e325/mptable.c @@ -48,7 +48,7 @@ void *smp_write_config_table(void *v) bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; } @@ -59,7 +59,7 @@ void *smp_write_config_table(void *v) bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -68,7 +68,7 @@ void *smp_write_config_table(void *v) if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } } @@ -161,7 +161,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/ibm/e326/mptable.c b/src/mainboard/ibm/e326/mptable.c index 6ad8b945b4..dc5cc429bf 100644 --- a/src/mainboard/ibm/e326/mptable.c +++ b/src/mainboard/ibm/e326/mptable.c @@ -48,7 +48,7 @@ void *smp_write_config_table(void *v) bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; } @@ -59,7 +59,7 @@ void *smp_write_config_table(void *v) bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -68,7 +68,7 @@ void *smp_write_config_table(void *v) if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } } @@ -161,7 +161,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/intel/d945gclf/acpi_tables.c b/src/mainboard/intel/d945gclf/acpi_tables.c index 1f8b5299cc..6b2956d387 100644 --- a/src/mainboard/intel/d945gclf/acpi_tables.c +++ b/src/mainboard/intel/d945gclf/acpi_tables.c @@ -221,7 +221,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Align ACPI tables to 16byte */ ALIGN_CURRENT; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -240,7 +240,7 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); @@ -249,7 +249,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); @@ -257,7 +257,7 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; @@ -265,7 +265,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, mcfg); #if OLD_ACPI - printk_debug("ACPI: * OEMB\n"); + printk(BIOS_DEBUG, "ACPI: * OEMB\n"); oemb=(acpi_oemb_t *)current; current += sizeof(acpi_oemb_t); ALIGN_CURRENT; @@ -273,7 +273,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, oemb); #endif - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); ALIGN_CURRENT; @@ -287,7 +287,7 @@ unsigned long write_acpi_tables(unsigned long start) #if OLD_ACPI for (i=0; i < dsdt->length; i++) { if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBEEF) { - printk_debug("ACPI: Patching up DSDT at offset 0x%04x -> 0x%08x\n", i, 0x24 + (u32)oemb); + printk(BIOS_DEBUG, "ACPI: Patching up DSDT at offset 0x%04x -> 0x%08x\n", i, 0x24 + (u32)oemb); *(u32*)(((u32)dsdt) + i) = 0x24 + (u32)oemb; break; } @@ -299,7 +299,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Pack GNVS into the ACPI table area */ for (i=0; i < dsdt->length; i++) { if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { - printk_debug("ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, current); + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, current); *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes break; } @@ -320,18 +320,18 @@ unsigned long write_acpi_tables(unsigned long start) dsdt->checksum = 0; dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); #if CONFIG_HAVE_ACPI_SLIC - printk_debug("ACPI: * SLIC\n"); + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); slic = (acpi_header_t *)current; current += acpi_create_slic(current); ALIGN_CURRENT; acpi_add_table(rsdp, slic); #endif - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); ALIGN_CURRENT; @@ -339,15 +339,15 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_debug("current = %lx\n", current); + printk(BIOS_DEBUG, "current = %lx\n", current); - printk_debug("ACPI: * DMI (Linux workaround)\n"); + printk(BIOS_DEBUG, "ACPI: * DMI (Linux workaround)\n"); memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE); #if CONFIG_WRITE_HIGH_TABLES == 1 memcpy((void *)current, dmi_table, DMI_TABLE_SIZE); @@ -355,6 +355,6 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/intel/d945gclf/mainboard_smi.c b/src/mainboard/intel/d945gclf/mainboard_smi.c index 333a59e982..afe9eee57b 100644 --- a/src/mainboard/intel/d945gclf/mainboard_smi.c +++ b/src/mainboard/intel/d945gclf/mainboard_smi.c @@ -31,7 +31,7 @@ int mainboard_io_trap_handler(int smif) { switch (smif) { case 0x99: - printk_debug("Sample\n"); + printk(BIOS_DEBUG, "Sample\n"); gnvs->smif = 0; break; default: diff --git a/src/mainboard/intel/d945gclf/mptable.c b/src/mainboard/intel/d945gclf/mptable.c index b2fce2508d..db5ee12b01 100644 --- a/src/mainboard/intel/d945gclf/mptable.c +++ b/src/mainboard/intel/d945gclf/mptable.c @@ -122,7 +122,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c index 1441bb5597..131145cfb9 100644 --- a/src/mainboard/intel/d945gclf/romstage.c +++ b/src/mainboard/intel/d945gclf/romstage.c @@ -60,7 +60,7 @@ static void setup_ich7_gpios(void) { /* TODO: This is highly board specific and should be moved */ - printk_debug(" GPIOS..."); + printk(BIOS_DEBUG, " GPIOS..."); /* General Registers */ outl(0x3f3df7c1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ outl(0xc6fcbfc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ @@ -254,7 +254,7 @@ void real_main(unsigned long bist) report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk_debug("soft reset detected.\n"); + printk(BIOS_DEBUG, "soft reset detected.\n"); boot_mode = 1; } @@ -265,17 +265,17 @@ void real_main(unsigned long bist) /* Read PM1_CNT */ reg32 = inl(DEFAULT_PMBASE + 0x04); - printk_debug("PM1_CNT: %08x\n", reg32); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); if (((reg32 >> 10) & 7) == 5) { #if CONFIG_HAVE_ACPI_RESUME - printk_debug("Resume from S3 detected.\n"); + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); boot_mode = 2; /* Clear SLP_TYPE. This will break stage2 but * we care for that when we get there. */ outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); #else - printk_debug("Resume from S3 detected, but disabled.\n"); + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); #endif } @@ -312,7 +312,7 @@ void real_main(unsigned long bist) /* This will not work if TSEG is in place! */ u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c); - printk_debug("TOM: 0x%08x\n", tom); + printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); ram_check(0x00000000, 0x000a0000); //ram_check(0x00100000, tom); } diff --git a/src/mainboard/intel/d945gclf/rtl8168.c b/src/mainboard/intel/d945gclf/rtl8168.c index 18f41fe32a..e278bcfb4e 100644 --- a/src/mainboard/intel/d945gclf/rtl8168.c +++ b/src/mainboard/intel/d945gclf/rtl8168.c @@ -27,7 +27,7 @@ static void nic_init(struct device *dev) { - printk_debug("Initializing RTL8168 Gigabit Ethernet\n"); + printk(BIOS_DEBUG, "Initializing RTL8168 Gigabit Ethernet\n"); // Nothing to do yet, but this has to be here to keep // coreboot from trying to execute an option ROM. } diff --git a/src/mainboard/intel/eagleheights/acpi_tables.c b/src/mainboard/intel/eagleheights/acpi_tables.c index c96c632e28..0dbad24160 100644 --- a/src/mainboard/intel/eagleheights/acpi_tables.c +++ b/src/mainboard/intel/eagleheights/acpi_tables.c @@ -111,7 +111,7 @@ unsigned long acpi_fill_madt(unsigned long current) bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_isa = 7; } @@ -156,7 +156,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Align ACPI tables to 16byte */ ALIGN_CURRENT; - printk_info("ACPI: Writing ACPI tables at %lx.\n", current); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", current); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -175,7 +175,7 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); @@ -184,7 +184,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); @@ -192,14 +192,14 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; ALIGN_CURRENT; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); ALIGN_CURRENT; @@ -211,10 +211,10 @@ unsigned long write_acpi_tables(unsigned long start) memcpy((void *) dsdt, (void *) AmlCode, ((acpi_header_t *) AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); ALIGN_CURRENT; @@ -222,6 +222,6 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/intel/eagleheights/mptable.c b/src/mainboard/intel/eagleheights/mptable.c index ac72aa0714..d83bdb81fb 100644 --- a/src/mainboard/intel/eagleheights/mptable.c +++ b/src/mainboard/intel/eagleheights/mptable.c @@ -108,7 +108,7 @@ void *smp_write_config_table(void *v) bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_pci = 6; bus_isa = 7; } @@ -117,7 +117,7 @@ void *smp_write_config_table(void *v) if(dev) { bus_pcie_a = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCIe Port A 0:2.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCIe Port A 0:2.0, using defaults\n"); bus_pcie_a = 1; } @@ -125,7 +125,7 @@ void *smp_write_config_table(void *v) if(dev) { bus_pcie_a1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCIe Port B 0:3.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCIe Port B 0:3.0, using defaults\n"); bus_pcie_a1 = 2; } @@ -133,7 +133,7 @@ void *smp_write_config_table(void *v) if(dev) { bus_pcie_b = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCIe Port B 0:3.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCIe Port B 0:3.0, using defaults\n"); bus_pcie_b = 3; } @@ -310,7 +310,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/intel/jarrell/mptable.c b/src/mainboard/intel/jarrell/mptable.c index 07732198ab..f9d20f2787 100644 --- a/src/mainboard/intel/jarrell/mptable.c +++ b/src/mainboard/intel/jarrell/mptable.c @@ -50,7 +50,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1f.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1f.0, using defaults\n"); bus_ich5r_1 = 4; bus_isa = 5; @@ -62,7 +62,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.1, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n"); bus_pxhd_1 = 2; } @@ -73,7 +73,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_pxhd_2 = 3; } @@ -124,7 +124,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.1\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n"); } /* pxhd apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); @@ -135,7 +135,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.3\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n"); } /* pxhd apic 5 */ if(bus_pxhd_3) { /* Active riser pxhd */ @@ -147,7 +147,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI %d:00.1\n",bus_pxhd_x); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI %d:00.1\n",bus_pxhd_x); } } /* pxhd apic 6 */ @@ -160,7 +160,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI %d:00.3\n",bus_pxhd_x); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI %d:00.3\n",bus_pxhd_x); } } } @@ -279,7 +279,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/intel/mtarvon/mptable.c b/src/mainboard/intel/mtarvon/mptable.c index 58058d3dc1..1090af1e99 100644 --- a/src/mainboard/intel/mtarvon/mptable.c +++ b/src/mainboard/intel/mtarvon/mptable.c @@ -150,7 +150,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/intel/truxton/mptable.c b/src/mainboard/intel/truxton/mptable.c index b45564dfd7..94facfe717 100644 --- a/src/mainboard/intel/truxton/mptable.c +++ b/src/mainboard/intel/truxton/mptable.c @@ -65,7 +65,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:04.0\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:04.0\n"); bus_aioc = 0; bus_isa = 9; } @@ -75,7 +75,7 @@ void *smp_write_config_table(void *v) bus_pea0 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 0:02.0\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:02.0\n"); bus_pea0 = 0; } /* PCIe A1 */ @@ -84,7 +84,7 @@ void *smp_write_config_table(void *v) bus_pea1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 0:03.0\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:03.0\n"); bus_pea1 = 0; } @@ -183,7 +183,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/intel/xe7501devkit/acpi_tables.c b/src/mainboard/intel/xe7501devkit/acpi_tables.c index 3f30fcc6f3..fd43eb693b 100644 --- a/src/mainboard/intel/xe7501devkit/acpi_tables.c +++ b/src/mainboard/intel/xe7501devkit/acpi_tables.c @@ -105,7 +105,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f ) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -123,14 +123,14 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* QNX wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; acpi_add_table(rsdp,madt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/intel/xe7501devkit/mptable.c b/src/mainboard/intel/xe7501devkit/mptable.c index 0da0676d35..6d911049bd 100644 --- a/src/mainboard/intel/xe7501devkit/mptable.c +++ b/src/mainboard/intel/xe7501devkit/mptable.c @@ -167,7 +167,7 @@ void* smp_write_config_table(void* v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/iwill/dk8_htx/acpi_tables.c b/src/mainboard/iwill/dk8_htx/acpi_tables.c index 82195f6e01..b87b4ac9a6 100644 --- a/src/mainboard/iwill/dk8_htx/acpi_tables.c +++ b/src/mainboard/iwill/dk8_htx/acpi_tables.c @@ -30,9 +30,9 @@ static void dump_mem(unsigned start, unsigned end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); } print_debug("\n"); } @@ -211,7 +211,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f ) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -228,14 +228,14 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp,hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; @@ -243,21 +243,21 @@ unsigned long write_acpi_tables(unsigned long start) /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current+=srat->header.length; acpi_add_table(rsdp,srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -277,7 +277,7 @@ unsigned long write_acpi_tables(unsigned long start) else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt current = ( current + 0x07) & -0x08; ssdtx = (acpi_header_t *)current; switch(sysconf.hcid[i]) { @@ -305,21 +305,21 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *)current; current += ((acpi_header_t *)AmlCode)->length; memcpy((void *)dsdt,(void *)AmlCode, \ ((acpi_header_t *)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); /* FDAT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -327,29 +327,29 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp,fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/iwill/dk8_htx/fadt.c b/src/mainboard/iwill/dk8_htx/fadt.c index ef33100697..d4c6622847 100644 --- a/src/mainboard/iwill/dk8_htx/fadt.c +++ b/src/mainboard/iwill/dk8_htx/fadt.c @@ -13,7 +13,7 @@ void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ acpi_header_t *header=&(fadt->header); - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt,0,sizeof(acpi_fadt_t)); diff --git a/src/mainboard/iwill/dk8_htx/get_bus_conf.c b/src/mainboard/iwill/dk8_htx/get_bus_conf.c index ae3b25dcb7..6fad3a3db9 100644 --- a/src/mainboard/iwill/dk8_htx/get_bus_conf.c +++ b/src/mainboard/iwill/dk8_htx/get_bus_conf.c @@ -112,11 +112,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); } /* 8132-1 */ @@ -125,7 +125,7 @@ void get_bus_conf(void) m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); } /* 8132-2 */ @@ -135,11 +135,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); } /* HT chain 1 */ @@ -165,7 +165,7 @@ void get_bus_conf(void) m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); } /* 8132-2 */ @@ -174,10 +174,10 @@ void get_bus_conf(void) m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS); m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; - // printk_debug("bus_isa=%d\n",bus_isa); + // printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); } break; @@ -191,12 +191,12 @@ void get_bus_conf(void) if (dev) { m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - // printk_debug("bus_8151_1=%d\n",bus_8151[j][1]); + // printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151[j][1]); m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); } break; diff --git a/src/mainboard/iwill/dk8_htx/irq_tables.c b/src/mainboard/iwill/dk8_htx/irq_tables.c index 97676f3c70..7d6f66bb96 100644 --- a/src/mainboard/iwill/dk8_htx/irq_tables.c +++ b/src/mainboard/iwill/dk8_htx/irq_tables.c @@ -58,7 +58,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -98,13 +98,13 @@ unsigned long write_pirq_routing_table(unsigned long addr) } //pci bridge - printk_debug("setting Onboard AMD Southbridge \n"); + printk(BIOS_DEBUG, "setting Onboard AMD Southbridge \n"); static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 }; pci_assign_irqs(m->bus_8111_0, sysconf.sbdn+1, slotIrqs_1_4); write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard AMD USB \n"); + printk(BIOS_DEBUG, "setting Onboard AMD USB \n"); static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11}; pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0); write_pirq_info(pirq_info, m->bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); @@ -138,7 +138,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/iwill/dk8_htx/mptable.c b/src/mainboard/iwill/dk8_htx/mptable.c index 25c02b0361..e8d3104741 100644 --- a/src/mainboard/iwill/dk8_htx/mptable.c +++ b/src/mainboard/iwill/dk8_htx/mptable.c @@ -212,7 +212,7 @@ static void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/iwill/dk8s2/mptable.c b/src/mainboard/iwill/dk8s2/mptable.c index 34e6037c21..867bd93234 100644 --- a/src/mainboard/iwill/dk8s2/mptable.c +++ b/src/mainboard/iwill/dk8s2/mptable.c @@ -46,7 +46,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -58,7 +58,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -69,7 +69,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -218,7 +218,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/iwill/dk8x/mptable.c b/src/mainboard/iwill/dk8x/mptable.c index 34e6037c21..867bd93234 100644 --- a/src/mainboard/iwill/dk8x/mptable.c +++ b/src/mainboard/iwill/dk8x/mptable.c @@ -46,7 +46,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -58,7 +58,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -69,7 +69,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -218,7 +218,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/kontron/986lcd-m/acpi_tables.c b/src/mainboard/kontron/986lcd-m/acpi_tables.c index a8e171d23d..afc4ad5fbe 100644 --- a/src/mainboard/kontron/986lcd-m/acpi_tables.c +++ b/src/mainboard/kontron/986lcd-m/acpi_tables.c @@ -150,7 +150,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Align ACPI tables to 16byte */ ALIGN_CURRENT; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -173,7 +173,7 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); @@ -182,7 +182,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); @@ -190,14 +190,14 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; ALIGN_CURRENT; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); ALIGN_CURRENT; @@ -213,7 +213,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Pack GNVS into the ACPI table area */ for (i=0; i < dsdt->length; i++) { if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { - printk_debug("ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08lx\n", i, current); + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08lx\n", i, current); *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes break; } @@ -232,18 +232,18 @@ unsigned long write_acpi_tables(unsigned long start) dsdt->checksum = 0; dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); #if CONFIG_HAVE_ACPI_SLIC - printk_debug("ACPI: * SLIC\n"); + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); slic = (acpi_header_t *)current; current += acpi_create_slic(current); ALIGN_CURRENT; acpi_add_table(rsdp, slic); #endif - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); ALIGN_CURRENT; @@ -251,16 +251,16 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "COREBOOT"); current += ssdt->length; acpi_add_table(rsdp, ssdt); ALIGN_CURRENT; - printk_debug("current = %lx\n", current); + printk(BIOS_DEBUG, "current = %lx\n", current); - printk_debug("ACPI: * DMI (Linux workaround)\n"); + printk(BIOS_DEBUG, "ACPI: * DMI (Linux workaround)\n"); memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE); #if CONFIG_WRITE_HIGH_TABLES == 1 memcpy((void *)current, dmi_table, DMI_TABLE_SIZE); @@ -268,6 +268,6 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c index 180df992e6..c7f2ee00e4 100644 --- a/src/mainboard/kontron/986lcd-m/mainboard.c +++ b/src/mainboard/kontron/986lcd-m/mainboard.c @@ -47,7 +47,7 @@ static int int15_handler(void) #define BOOT_DISPLAY_EFP2 (1 << 6) #define BOOT_DISPLAY_LCD2 (1 << 7) - printk_debug("%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX); switch (M.x86.R_AX) { @@ -176,12 +176,12 @@ static void hwm_setup(void) switch (cpufan_control) { case FAN_CRUISE_CONTROL_SPEED: - printk_debug("Fan Cruise Control setting CPU fan to %d RPM\n", + printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n", fan_speeds[cpufan_speed].fan_speed); hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); // CPUFANIN target speed break; case FAN_CRUISE_CONTROL_THERMAL: - printk_debug("Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n", + printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n", temperatures[cpufan_temperature].deg_celsius, temperatures[cpufan_temperature].deg_fahrenheit); hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); // CPUFANIN target temperature @@ -190,12 +190,12 @@ static void hwm_setup(void) switch (sysfan_control) { case FAN_CRUISE_CONTROL_SPEED: - printk_debug("Fan Cruise Control setting system fan to %d RPM\n", + printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n", fan_speeds[sysfan_speed].fan_speed); hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); // SYSFANIN target speed break; case FAN_CRUISE_CONTROL_THERMAL: - printk_debug("Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n", + printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n", temperatures[sysfan_temperature].deg_celsius, temperatures[sysfan_temperature].deg_fahrenheit); hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature diff --git a/src/mainboard/kontron/986lcd-m/mainboard_smi.c b/src/mainboard/kontron/986lcd-m/mainboard_smi.c index 192648f5ca..6e4b5ad8d1 100644 --- a/src/mainboard/kontron/986lcd-m/mainboard_smi.c +++ b/src/mainboard/kontron/986lcd-m/mainboard_smi.c @@ -32,7 +32,7 @@ int mainboard_io_trap_handler(int smif) { switch (smif) { case 0x99: - printk_debug("Sample\n"); + printk(BIOS_DEBUG, "Sample\n"); gnvs->smif = 0; break; default: diff --git a/src/mainboard/kontron/986lcd-m/mptable.c b/src/mainboard/kontron/986lcd-m/mptable.c index fce7835952..dbf36bd51c 100644 --- a/src/mainboard/kontron/986lcd-m/mptable.c +++ b/src/mainboard/kontron/986lcd-m/mptable.c @@ -59,7 +59,7 @@ static void *smp_write_config_table(void *v) firewire = dev_find_device(0x104c, 0x8023, 0); if (firewire) { firewire_bus = firewire->bus->secondary; - printk_spew("Firewire device is on bus %x\n", + printk(BIOS_SPEW, "Firewire device is on bus %x\n", firewire_bus); max_pci_bus = firewire_bus; } @@ -71,7 +71,7 @@ static void *smp_write_config_table(void *v) riser = dev_find_device(0x3388, 0x0022, 0); if (riser) { riser_bus = riser->link[0].secondary; - printk_spew("Riser bus is %x\n", riser_bus); + printk(BIOS_SPEW, "Riser bus is %x\n", riser_bus); max_pci_bus = riser_bus; } @@ -153,7 +153,7 @@ static void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c index 32cd1c7ff9..9142a55707 100644 --- a/src/mainboard/kontron/986lcd-m/romstage.c +++ b/src/mainboard/kontron/986lcd-m/romstage.c @@ -68,7 +68,7 @@ #include "southbridge/intel/i82801gx/i82801gx.h" static void setup_ich7_gpios(void) { - printk_debug(" GPIOS..."); + printk(BIOS_DEBUG, " GPIOS..."); /* General Registers */ outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ outl(0xe0e8efc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ @@ -265,18 +265,18 @@ static void rcba_config(void) reg32 |= FD_PCIE6|FD_PCIE5|FD_PCIE4; if (read_option(CMOS_VSTART_ethernet1, CMOS_VLEN_ethernet1, 0) != 0) { - printk_debug("Disabling ethernet adapter 1.\n"); + printk(BIOS_DEBUG, "Disabling ethernet adapter 1.\n"); reg32 |= FD_PCIE1; } if (read_option(CMOS_VSTART_ethernet2, CMOS_VLEN_ethernet2, 0) != 0) { - printk_debug("Disabling ethernet adapter 2.\n"); + printk(BIOS_DEBUG, "Disabling ethernet adapter 2.\n"); reg32 |= FD_PCIE2; } else { if (reg32 & FD_PCIE1) port_shuffle = 1; } if (read_option(CMOS_VSTART_ethernet3, CMOS_VLEN_ethernet3, 0) != 0) { - printk_debug("Disabling ethernet adapter 3.\n"); + printk(BIOS_DEBUG, "Disabling ethernet adapter 3.\n"); reg32 |= FD_PCIE3; } else { if (reg32 & FD_PCIE1) @@ -392,7 +392,7 @@ void real_main(unsigned long bist) report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk_debug("soft reset detected.\n"); + printk(BIOS_DEBUG, "soft reset detected.\n"); boot_mode = 1; } @@ -403,10 +403,10 @@ void real_main(unsigned long bist) /* Read PM1_CNT */ reg32 = inl(DEFAULT_PMBASE + 0x04); - printk_debug("PM1_CNT: %08x\n", reg32); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); if (((reg32 >> 10) & 7) == 5) { #if CONFIG_HAVE_ACPI_RESUME - printk_debug("Resume from S3 detected.\n"); + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); boot_mode = 2; /* Clear SLP_TYPE. This will break stage2 but * we care for that when we get there. @@ -414,7 +414,7 @@ void real_main(unsigned long bist) outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); #else - printk_debug("Resume from S3 detected, but disabled.\n"); + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); #endif } @@ -451,7 +451,7 @@ void real_main(unsigned long bist) /* This will not work if TSEG is in place! */ u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c); - printk_debug("TOM: 0x%08x\n", tom); + printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); ram_check(0x00000000, 0x000a0000); //ram_check(0x00100000, tom); } diff --git a/src/mainboard/kontron/986lcd-m/rtl8168.c b/src/mainboard/kontron/986lcd-m/rtl8168.c index 18f41fe32a..e278bcfb4e 100644 --- a/src/mainboard/kontron/986lcd-m/rtl8168.c +++ b/src/mainboard/kontron/986lcd-m/rtl8168.c @@ -27,7 +27,7 @@ static void nic_init(struct device *dev) { - printk_debug("Initializing RTL8168 Gigabit Ethernet\n"); + printk(BIOS_DEBUG, "Initializing RTL8168 Gigabit Ethernet\n"); // Nothing to do yet, but this has to be here to keep // coreboot from trying to execute an option ROM. } diff --git a/src/mainboard/kontron/kt690/acpi_tables.c b/src/mainboard/kontron/kt690/acpi_tables.c index f450b7c4bf..b77a3bd507 100644 --- a/src/mainboard/kontron/kt690/acpi_tables.c +++ b/src/mainboard/kontron/kt690/acpi_tables.c @@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for (i = start; i < end; i++) { if ((i & 0xf) == 0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start) #if 0 /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current += slit->header.length; @@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start) } else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; ssdtx = (acpi_header_t *) current; switch (sysconf.hcid[i]) { @@ -243,20 +243,20 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -264,28 +264,28 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/kontron/kt690/fadt.c b/src/mainboard/kontron/kt690/fadt.c index e7bc017bbd..5d28790b4d 100644 --- a/src/mainboard/kontron/kt690/fadt.c +++ b/src/mainboard/kontron/kt690/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/kontron/kt690/irq_tables.c b/src/mainboard/kontron/kt690/irq_tables.c index 38479aac14..8457745724 100644 --- a/src/mainboard/kontron/kt690/irq_tables.c +++ b/src/mainboard/kontron/kt690/irq_tables.c @@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/kontron/kt690/mainboard.c b/src/mainboard/kontron/kt690/mainboard.c index da5cd0402e..5de74a6cff 100644 --- a/src/mainboard/kontron/kt690/mainboard.c +++ b/src/mainboard/kontron/kt690/mainboard.c @@ -61,7 +61,7 @@ static void enable_onboard_nic() { u8 byte; - printk_info("%s.\n", __func__); + printk(BIOS_INFO, "%s.\n", __func__); /* set index register 0C50h to 13h (miscellaneous control) */ outb(0x13, 0xC50); /* CMIndex */ @@ -100,7 +100,7 @@ static void get_ide_dma66() struct device *sm_dev; struct device *ide_dev; - printk_info("%s.\n", __func__); + printk(BIOS_INFO, "%s.\n", __func__); sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); byte = pci_read_config8(sm_dev, 0xA9); @@ -137,7 +137,7 @@ static void set_thermal_config() byte = ADT7461_read_byte(0x02); /* read status register to clear it */ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); /* sb600 settings for thermal config */ /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -190,19 +190,19 @@ void kt690_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard KT690 Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard KT690 Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -224,7 +224,7 @@ void kt690_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -244,7 +244,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/kontron/kt690/mptable.c b/src/mainboard/kontron/kt690/mptable.c index 06926bdad4..ec1695e6ae 100644 --- a/src/mainboard/kontron/kt690/mptable.c +++ b/src/mainboard/kontron/kt690/mptable.c @@ -199,7 +199,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/kontron/kt690/romstage.c b/src/mainboard/kontron/kt690/romstage.c index eb01747828..8ea8e6eae1 100644 --- a/src/mainboard/kontron/kt690/romstage.c +++ b/src/mainboard/kontron/kt690/romstage.c @@ -136,7 +136,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); setup_kt690_resource_map(); @@ -162,7 +162,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Read FIDVID_STATUS */ msr=rdmsr(0xc0010042); - printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); enable_fid_change(); enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); @@ -170,17 +170,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010042); - printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); } else { - printk_debug("Changing FIDVID not supported\n"); - printk_spew("... because cpuid returned %08x\n", cpuid1.edx); + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); + printk(BIOS_SPEW, "... because cpuid returned %08x\n", cpuid1.edx); } needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); - printk_debug("needs_reset=0x%x\n", needs_reset); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); if (needs_reset) { @@ -191,7 +191,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now; */ - printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c index ad72f5dc02..e0d3fa703e 100644 --- a/src/mainboard/lippert/roadrunner-lx/mainboard.c +++ b/src/mainboard/lippert/roadrunner-lx/mainboard.c @@ -42,7 +42,7 @@ static void init(struct device *dev) { struct mainboard_config *mb = dev->chip_info; unsigned int gpio_base, i; - printk_debug("LiPPERT RoadRunner-LX ENTER %s\n", __func__); + printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__); /* Init CS5536 GPIOs. */ gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, @@ -62,7 +62,7 @@ static void init(struct device *dev) } outb(mb->sio_gp1x_config, 0x1220); /* Simple-I/O GP17-10 */ - printk_debug("LiPPERT RoadRunner-LX EXIT %s\n", __func__); + printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c index 05d2265569..7977969315 100644 --- a/src/mainboard/lippert/spacerunner-lx/mainboard.c +++ b/src/mainboard/lippert/spacerunner-lx/mainboard.c @@ -43,7 +43,7 @@ static void init(struct device *dev) { struct mainboard_config *mb = dev->chip_info; unsigned int gpio_base, i; - printk_debug("LiPPERT SpaceRunner-LX ENTER %s\n", __func__); + printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX ENTER %s\n", __func__); /* Init CS5536 GPIOs */ gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, @@ -66,7 +66,7 @@ static void init(struct device *dev) } outb(mb->sio_gp1x_config, 0x1220); /* Simple-I/O GP17-10 */ - printk_debug("LiPPERT SpaceRunner-LX EXIT %s\n", __func__); + printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c index 90fa084217..a63c803b8e 100644 --- a/src/mainboard/msi/ms7135/get_bus_conf.c +++ b/src/mainboard/msi/ms7135/get_bus_conf.c @@ -111,8 +111,8 @@ void get_bus_conf(void) for (j = bus_ck804[i]; j < bus_isa; j++) bus_type[j] = 1; } else { - printk_debug - ("ERROR - could not find PCI %02x:%02x.0, using defaults\n", + printk + (BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804[0], sbdn + dn); bus_isa = bus_ck804[i - 1] + 1; } diff --git a/src/mainboard/msi/ms7135/irq_tables.c b/src/mainboard/msi/ms7135/irq_tables.c index f8d47d6dfa..98591d71eb 100644 --- a/src/mainboard/msi/ms7135/irq_tables.c +++ b/src/mainboard/msi/ms7135/irq_tables.c @@ -91,7 +91,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *) (addr); @@ -200,7 +200,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); #if 0 unsigned char irq[4]; diff --git a/src/mainboard/msi/ms7135/mptable.c b/src/mainboard/msi/ms7135/mptable.c index 1182a286af..874b54b322 100644 --- a/src/mainboard/msi/ms7135/mptable.c +++ b/src/mainboard/msi/ms7135/mptable.c @@ -212,7 +212,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/msi/ms7260/get_bus_conf.c b/src/mainboard/msi/ms7260/get_bus_conf.c index 47273cdaa4..749be0e33d 100644 --- a/src/mainboard/msi/ms7260/get_bus_conf.c +++ b/src/mainboard/msi/ms7260/get_bus_conf.c @@ -114,8 +114,8 @@ void get_bus_conf(void) for (j = bus_mcp55[1]; j < bus_mcp55[2]; j++) bus_type[j] = 1; } else { - printk_debug - ("ERROR - could not find PCI 1:%02x.0, using defaults\n", + printk + (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); bus_mcp55[1] = 2; @@ -132,8 +132,8 @@ void get_bus_conf(void) for (j = bus_mcp55[i]; j < bus_isa; j++) bus_type[j] = 1; } else { - printk_debug - ("ERROR - could not find PCI %02x:%02x.0, using defaults\n", + printk + (BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2); bus_isa = bus_mcp55[i - 1] + 1; } diff --git a/src/mainboard/msi/ms7260/irq_tables.c b/src/mainboard/msi/ms7260/irq_tables.c index 2e7e8cc79f..b9e3b26e6c 100644 --- a/src/mainboard/msi/ms7260/irq_tables.c +++ b/src/mainboard/msi/ms7260/irq_tables.c @@ -71,7 +71,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 and 0x100000. */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -106,7 +106,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) if (sum != pirq->checksum) pirq->checksum = sum; - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/msi/ms7260/mptable.c b/src/mainboard/msi/ms7260/mptable.c index a51f0f4bf9..b830eb8173 100644 --- a/src/mainboard/msi/ms7260/mptable.c +++ b/src/mainboard/msi/ms7260/mptable.c @@ -139,7 +139,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c index e02de0dc9a..c4f086a76a 100644 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ b/src/mainboard/msi/ms9185/get_bus_conf.c @@ -108,12 +108,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; - printk_debug("bus_isa=%d\n",m->bus_isa); + printk(BIOS_DEBUG, "bus_isa=%d\n",m->bus_isa); #endif } } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); } /* bcm5780 */ @@ -124,12 +124,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; - printk_debug("bus_isa=%d\n",m->bus_isa); + printk(BIOS_DEBUG, "bus_isa=%d\n",m->bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); } } diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c index 7f1eccc8a2..0ccd722792 100644 --- a/src/mainboard/msi/ms9185/irq_tables.c +++ b/src/mainboard/msi/ms9185/irq_tables.c @@ -82,7 +82,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -119,7 +119,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c index 0e634f5891..83c8f90714 100644 --- a/src/mainboard/msi/ms9185/mptable.c +++ b/src/mainboard/msi/ms9185/mptable.c @@ -192,7 +192,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c index ed5bde722e..276cef5461 100644 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ b/src/mainboard/msi/ms9282/get_bus_conf.c @@ -131,7 +131,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -140,7 +140,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -153,7 +153,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c index 24f998ab85..4ba6b639cc 100644 --- a/src/mainboard/msi/ms9282/irq_tables.c +++ b/src/mainboard/msi/ms9282/irq_tables.c @@ -79,7 +79,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -125,7 +125,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c index f021ec2078..39c08ff52d 100644 --- a/src/mainboard/msi/ms9282/mptable.c +++ b/src/mainboard/msi/ms9282/mptable.c @@ -160,7 +160,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/msi/ms9652_fam10/acpi_tables.c b/src/mainboard/msi/ms9652_fam10/acpi_tables.c index d2e3997fe6..473d3898ec 100644 --- a/src/mainboard/msi/ms9652_fam10/acpi_tables.c +++ b/src/mainboard/msi/ms9652_fam10/acpi_tables.c @@ -123,7 +123,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT table. */ rsdp = (acpi_rsdp_t *) current; @@ -138,7 +138,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_write_rsdt(rsdt); /* We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); /* we should align FACS to 64B as per ACPI specs */ current = ALIGN(current, 64); @@ -152,9 +152,9 @@ unsigned long write_acpi_tables(unsigned long start) ((acpi_header_t *) AmlCode)->length); dsdt->checksum = 0; /* Don't trust iasl to get this right. */ dsdt->checksum = acpi_checksum(dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -162,46 +162,46 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); /* If we want to use HPET timers Linux wants an MADT. */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp, slit); /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c index 35ad714b13..52f687ab61 100644 --- a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c +++ b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c @@ -74,7 +74,7 @@ void get_bus_conf(void) device_t dev; int i, j; - printk_spew("get_bus_conf()\n"); + printk(BIOS_SPEW, "get_bus_conf()\n"); if(get_bus_conf_done==1) return; //do it only once @@ -103,7 +103,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -112,7 +112,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -125,16 +125,16 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); - printk_spew("CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n"); + printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n"); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - printk_spew("CONFIG_LOGICAL_CPUS==0: apicid_base: %08x\n"); + printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==0: apicid_base: %08x\n"); #endif m->apicid_mcp55 = apicid_base+0; } diff --git a/src/mainboard/msi/ms9652_fam10/irq_tables.c b/src/mainboard/msi/ms9652_fam10/irq_tables.c index ea870a147b..b3628b65c5 100644 --- a/src/mainboard/msi/ms9652_fam10/irq_tables.c +++ b/src/mainboard/msi/ms9652_fam10/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -131,7 +131,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/msi/ms9652_fam10/mptable.c b/src/mainboard/msi/ms9652_fam10/mptable.c index 3ddae1ccdc..b877c84ece 100644 --- a/src/mainboard/msi/ms9652_fam10/mptable.c +++ b/src/mainboard/msi/ms9652_fam10/mptable.c @@ -149,7 +149,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c index 3ab04b0eeb..7a84f53429 100644 --- a/src/mainboard/msi/ms9652_fam10/romstage.c +++ b/src/mainboard/msi/ms9652_fam10/romstage.c @@ -200,7 +200,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Halt if there was a built in self test failure */ report_bist_failure(bist); @@ -211,10 +211,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x\n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x\n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x\n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -230,12 +230,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Setup nodes PCI space and start core 0 AP init. */ finalize_node_setup(sysinfo); - printk_debug("finalize_node_setup done\n"); + printk(BIOS_DEBUG, "finalize_node_setup done\n"); /* Setup any mainboard PCI settings etc. */ - printk_debug("setup_mb_resource_map begin\n"); + printk(BIOS_DEBUG, "setup_mb_resource_map begin\n"); setup_mb_resource_map(); - printk_debug("setup_mb_resource_map end\n"); + printk(BIOS_DEBUG, "setup_mb_resource_map end\n"); post_code(0x36); /* wait for all the APs core0 started by finalize_node_setup. */ @@ -248,10 +248,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); - printk_debug("wait_all_other_cores_started()\n"); + printk(BIOS_DEBUG, "wait_all_other_cores_started()\n"); wait_all_other_cores_started(bsp_apicid); #endif @@ -259,7 +259,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only * need to be done once.*/ @@ -277,7 +277,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); #endif wants_reset = mcp55_early_setup_x(); @@ -290,27 +290,27 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } if (wants_reset) - printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); post_code(0x3B); /* It's the time to set ctrl in sysinfo now; */ - printk_debug("fill_mem_ctrl()\n"); + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); - printk_debug("enable_smbus()\n"); + printk(BIOS_DEBUG, "enable_smbus()\n"); enable_smbus(); post_code(0x3E); memreset_setup(); post_code(0x40); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); - printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x43); // Should never see this post code. } diff --git a/src/mainboard/newisys/khepri/mptable.c b/src/mainboard/newisys/khepri/mptable.c index 8d7d519654..03ee960d43 100644 --- a/src/mainboard/newisys/khepri/mptable.c +++ b/src/mainboard/newisys/khepri/mptable.c @@ -46,7 +46,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -58,7 +58,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -69,7 +69,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -219,7 +219,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c index 80659890fc..0c49642bcd 100644 --- a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c +++ b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c @@ -137,7 +137,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn_min, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn_min, busn_max, m->bus_isa); } /* MCP55b */ diff --git a/src/mainboard/nvidia/l1_2pvv/irq_tables.c b/src/mainboard/nvidia/l1_2pvv/irq_tables.c index 398f805ef0..b82293e549 100644 --- a/src/mainboard/nvidia/l1_2pvv/irq_tables.c +++ b/src/mainboard/nvidia/l1_2pvv/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -122,7 +122,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/nvidia/l1_2pvv/mptable.c b/src/mainboard/nvidia/l1_2pvv/mptable.c index 771ea90042..9564006247 100644 --- a/src/mainboard/nvidia/l1_2pvv/mptable.c +++ b/src/mainboard/nvidia/l1_2pvv/mptable.c @@ -207,7 +207,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/olpc/btest/mainboard.c b/src/mainboard/olpc/btest/mainboard.c index 40e363f49a..6df993eca4 100644 --- a/src/mainboard/olpc/btest/mainboard.c +++ b/src/mainboard/olpc/btest/mainboard.c @@ -49,22 +49,22 @@ static void init_dcon(void) { unsigned short rev = 0; unsigned short iobase = _getsmbusbase(); - printk_debug("CHECKING FOR DCON (%x)\n", iobase); + printk(BIOS_DEBUG, "CHECKING FOR DCON (%x)\n", iobase); /* Get the IO base for the SMBUS */ rev = do_smbus_read_word(iobase, 0x0D << 1, 0x00); if (rev & 0xDC00) { - printk_debug("DCON FOUND - REV %x\n", rev); + printk(BIOS_DEBUG, "DCON FOUND - REV %x\n", rev); /* Enable the DCON */ ret = do_smbus_write_word(iobase, 0x0D << 1, 0x01, 0x0069); if (ret != 0) - printk_debug("DCON ENABLE FAILED\n", ret); + printk(BIOS_DEBUG, "DCON ENABLE FAILED\n", ret); } else - printk_debug("DCON NOT FOUND (%x)\n", rev); + printk(BIOS_DEBUG, "DCON NOT FOUND (%x)\n", rev); write_bit(rev > 0 ? 1 : 0); } @@ -104,18 +104,18 @@ static void init(struct device *dev) { unsigned char usbirq = 0xa; */ - printk_debug("OLPC BTEST ENTER %s\n", __func__); + printk(BIOS_DEBUG, "OLPC BTEST ENTER %s\n", __func__); #if 0 /* I can't think of any reason NOT to just set this. If it turns out we want this to be * conditional we can make it a config variable later. */ - printk_debug("%s (%x,%x)SET USB PCI interrupt line to %d\n", + printk(BIOS_DEBUG, "%s (%x,%x)SET USB PCI interrupt line to %d\n", __func__, bus, devfn, usbirq); usb = dev_find_slot(bus, devfn); if (! usb){ - printk_err("Could not find USB\n"); + printk(BIOS_ERR, "Could not find USB\n"); } else { pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq); } @@ -123,7 +123,7 @@ static void init(struct device *dev) { init_dcon(); init_cafe_irq(); - printk_debug("OLPC BTEST EXIT %s\n", __func__); + printk(BIOS_DEBUG, "OLPC BTEST EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/olpc/rev_a/mainboard.c b/src/mainboard/olpc/rev_a/mainboard.c index 604f34ccfd..539603dab2 100644 --- a/src/mainboard/olpc/rev_a/mainboard.c +++ b/src/mainboard/olpc/rev_a/mainboard.c @@ -48,22 +48,22 @@ static void init_dcon(void) { unsigned short rev = 0; unsigned short iobase = _getsmbusbase(); - printk_debug("CHECKING FOR DCON (%x)\n", iobase); + printk(BIOS_DEBUG, "CHECKING FOR DCON (%x)\n", iobase); /* Get the IO base for the SMBUS */ rev = do_smbus_read_word(iobase, 0x0D << 1, 0x00); if (rev & 0xDC00) { - printk_debug("DCON FOUND - REV %x\n", rev); + printk(BIOS_DEBUG, "DCON FOUND - REV %x\n", rev); /* Enable the DCON */ ret = do_smbus_write_word(iobase, 0x0D << 1, 0x01, 0x0069); if (ret != 0) - printk_debug("DCON ENABLE FAILED\n", ret); + printk(BIOS_DEBUG, "DCON ENABLE FAILED\n", ret); } else - printk_debug("DCON NOT FOUND (%x)\n", rev); + printk(BIOS_DEBUG, "DCON NOT FOUND (%x)\n", rev); write_bit(rev > 0 ? 1 : 0); } @@ -76,25 +76,25 @@ static void init(struct device *dev) { unsigned char usbirq = 0xa; */ - printk_debug("OLPC REVA ENTER %s\n", __func__); + printk(BIOS_DEBUG, "OLPC REVA ENTER %s\n", __func__); #if 0 /* I can't think of any reason NOT to just set this. If it turns out we want this to be * conditional we can make it a config variable later. */ - printk_debug("%s (%x,%x)SET USB PCI interrupt line to %d\n", + printk(BIOS_DEBUG, "%s (%x,%x)SET USB PCI interrupt line to %d\n", __func__, bus, devfn, usbirq); usb = dev_find_slot(bus, devfn); if (! usb){ - printk_err("Could not find USB\n"); + printk(BIOS_ERR, "Could not find USB\n"); } else { pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq); } #endif init_dcon(); - printk_debug("OLPC REVA EXIT %s\n", __func__); + printk(BIOS_DEBUG, "OLPC REVA EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/pcengines/alix1c/mainboard.c b/src/mainboard/pcengines/alix1c/mainboard.c index ab70434234..a32cb1405a 100644 --- a/src/mainboard/pcengines/alix1c/mainboard.c +++ b/src/mainboard/pcengines/alix1c/mainboard.c @@ -23,8 +23,8 @@ static void init(struct device *dev) { - printk_debug("ALIX1.C ENTER %s\n", __func__); - printk_debug("ALIX1.C EXIT %s\n", __func__); + printk(BIOS_DEBUG, "ALIX1.C ENTER %s\n", __func__); + printk(BIOS_DEBUG, "ALIX1.C EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/mainboard/rca/rm4100/mainboard_smi.c b/src/mainboard/rca/rm4100/mainboard_smi.c index 3e242359ee..0b0d57be63 100644 --- a/src/mainboard/rca/rm4100/mainboard_smi.c +++ b/src/mainboard/rca/rm4100/mainboard_smi.c @@ -25,6 +25,6 @@ int mainboard_io_trap_handler(int smif) { - printk_debug("MAINBOARD IO TRAP HANDLER!\n"); + printk(BIOS_DEBUG, "MAINBOARD IO TRAP HANDLER!\n"); return 1; } diff --git a/src/mainboard/roda/rk886ex/acpi_tables.c b/src/mainboard/roda/rk886ex/acpi_tables.c index 34faf63e16..30c479c513 100644 --- a/src/mainboard/roda/rk886ex/acpi_tables.c +++ b/src/mainboard/roda/rk886ex/acpi_tables.c @@ -219,7 +219,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Align ACPI tables to 16byte */ ALIGN_CURRENT; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -242,7 +242,7 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); @@ -251,7 +251,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); @@ -259,14 +259,14 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; ALIGN_CURRENT; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); ALIGN_CURRENT; @@ -303,7 +303,7 @@ unsigned long write_acpi_tables(unsigned long start) /* Pack GNVS into the ACPI table area */ for (i=0; i < dsdt->length; i++) { if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { - printk_debug("ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, (u32)current); + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, (u32)current); *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes break; } @@ -325,18 +325,18 @@ unsigned long write_acpi_tables(unsigned long start) dsdt->checksum = 0; dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); #if CONFIG_HAVE_ACPI_SLIC - printk_debug("ACPI: * SLIC\n"); + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); slic = (acpi_header_t *)current; current += acpi_create_slic(current); ALIGN_CURRENT; acpi_add_table(rsdp, slic); #endif - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); ALIGN_CURRENT; @@ -344,16 +344,16 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "COREBOOT"); current += ssdt->length; acpi_add_table(rsdp, ssdt); ALIGN_CURRENT; - printk_debug("current = %lx\n", current); + printk(BIOS_DEBUG, "current = %lx\n", current); - printk_debug("ACPI: * DMI (Linux workaround)\n"); + printk(BIOS_DEBUG, "ACPI: * DMI (Linux workaround)\n"); memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE); #if CONFIG_WRITE_HIGH_TABLES == 1 memcpy((void *)current, dmi_table, DMI_TABLE_SIZE); @@ -361,10 +361,10 @@ unsigned long write_acpi_tables(unsigned long start) ALIGN_CURRENT; #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); /* Enable Dummy DCC ON# for DVI */ - printk_debug("Laptop handling...\n"); + printk(BIOS_DEBUG, "Laptop handling...\n"); outb(inb(0x60f) & ~(1 << 5), 0x60f); return current; diff --git a/src/mainboard/roda/rk886ex/ec.c b/src/mainboard/roda/rk886ex/ec.c index 5121ac2e08..f2d23ad6c5 100644 --- a/src/mainboard/roda/rk886ex/ec.c +++ b/src/mainboard/roda/rk886ex/ec.c @@ -32,10 +32,10 @@ int send_ec_command(u8 command) while ((inb(EC_SC) & EC_IBF) && --timeout) { udelay(10); if ((timeout & 0xff) == 0) - printk_spew("."); + printk(BIOS_SPEW, "."); } if (!timeout) { - printk_debug("Timeout while sending command 0x%02x to EC!\n", + printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", command); // return -1; } @@ -52,10 +52,10 @@ int send_ec_data(u8 data) while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 udelay(10); if ((timeout & 0xff) == 0) - printk_spew("."); + printk(BIOS_SPEW, "."); } if (!timeout) { - printk_debug("Timeout while sending data 0x%02x to EC!\n", + printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", data); // return -1; } @@ -84,15 +84,15 @@ u8 recv_ec_data(void) } udelay(10); if ((timeout & 0xff) == 0) - printk_spew("."); + printk(BIOS_SPEW, "."); } if (!timeout) { - printk_debug("\nTimeout while receiving data from EC!\n"); + printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); // return -1; } data = inb(EC_DATA); - printk_debug("recv_ec_data: 0x%02x\n", data); + printk(BIOS_DEBUG, "recv_ec_data: 0x%02x\n", data); return data; } diff --git a/src/mainboard/roda/rk886ex/m3885.c b/src/mainboard/roda/rk886ex/m3885.c index 66e030da88..418f43f5de 100644 --- a/src/mainboard/roda/rk886ex/m3885.c +++ b/src/mainboard/roda/rk886ex/m3885.c @@ -118,10 +118,10 @@ static int send_kbd_command(u8 command) while ((inb(KBD_SC) & KBD_IBF) && --timeout) { udelay(10); if ((timeout & 0xff) == 0) - printk_spew("."); + printk(BIOS_SPEW, "."); } if (!timeout) { - printk_debug("Timeout while sending command 0x%02x to EC!\n", + printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", command); // return -1; } @@ -138,10 +138,10 @@ static int send_kbd_data(u8 data) while ((inb(KBD_SC) & KBD_IBF) && --timeout) { // wait for IBF = 0 udelay(10); if ((timeout & 0xff) == 0) - printk_spew("."); + printk(BIOS_SPEW, "."); } if (!timeout) { - printk_debug("Timeout while sending data 0x%02x to EC!\n", + printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", data); // return -1; } @@ -164,10 +164,10 @@ static u8 recv_kbd_data(void) } udelay(10); if ((timeout & 0xff) == 0) - printk_spew("."); + printk(BIOS_SPEW, "."); } if (!timeout) { - printk_debug("\nTimeout while receiving data from EC!\n"); + printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); // return -1; } @@ -186,13 +186,13 @@ static u8 m3885_get_variable(u8 index) send_kbd_command(0xbc); send_kbd_command(0xff); ret = recv_kbd_data(); - printk_spew("m3885: get variable %02x = %02x\n", index, ret); + printk(BIOS_SPEW, "m3885: get variable %02x = %02x\n", index, ret); return ret; } static void m3885_set_variable(u8 index, u8 data) { - printk_spew("m3885: set variable %02x = %02x\n", index, data); + printk(BIOS_SPEW, "m3885: set variable %02x = %02x\n", index, data); send_kbd_command(0xb8); send_kbd_data(index); send_kbd_command(0xbd); @@ -201,7 +201,7 @@ static void m3885_set_variable(u8 index, u8 data) static void m3885_set_proc_ram(u8 index, u8 data) { - printk_spew("m3885: set procram %02x = %02x\n", index, data); + printk(BIOS_SPEW, "m3885: set procram %02x = %02x\n", index, data); send_kbd_command(0xb8); send_kbd_data(index); send_kbd_command(0xbb); @@ -217,7 +217,7 @@ static u8 m3885_get_proc_ram(u8 index) send_kbd_command(0xba); // send_kbd_command(0xff); ret = recv_kbd_data(); - printk_spew("m3885: get procram %02x = %02x\n", index, ret); + printk(BIOS_SPEW, "m3885: get procram %02x = %02x\n", index, ret); return ret; } @@ -255,25 +255,25 @@ void m3885_configure_multikey(void) /* Get the number of variables */ maxvars = m3885_get_variable(0x00); - printk_debug("M388x has %d variables in bank 2.\n", maxvars); + printk(BIOS_DEBUG, "M388x has %d variables in bank 2.\n", maxvars); if (maxvars >= 35) { offs = m3885_get_variable(0x23); if ((offs > 0xc0) || (offs < 0x80)) { - printk_debug("M388x does not have a valid ram offset (0x%x)\n", offs); + printk(BIOS_DEBUG, "M388x does not have a valid ram offset (0x%x)\n", offs); } else { - printk_debug("Writing Fn-Table to M388x RAM offset 0x%x\n", offs); + printk(BIOS_DEBUG, "Writing Fn-Table to M388x RAM offset 0x%x\n", offs); for (i=0; i < ARRAY_SIZE(function_ram); i++) { m3885_set_proc_ram(i + offs, function_ram[i]); } } } else { - printk_debug("Could not load Function-RAM (%d).\n", maxvars); + printk(BIOS_DEBUG, "Could not load Function-RAM (%d).\n", maxvars); } // restore original bank m3885_set_variable(0x0c, kstate5_flags); maxvars = m3885_get_variable(0x00); - printk_debug("M388x has %d variables in original bank.\n", maxvars); + printk(BIOS_DEBUG, "M388x has %d variables in original bank.\n", maxvars); for (i=0; i<ARRAY_SIZE(variables); i+=3) { u8 reg8; if(variables[i + 0] > maxvars) @@ -402,10 +402,10 @@ u8 m3885_gpio(u8 value) timeout = 0xf; while (ec_read(M3885_CMCMD) && --timeout) { udelay(10); - printk_debug("."); + printk(BIOS_DEBUG, "."); } if (!timeout) { - printk_debug("\nTimeout while waiting for M3885 command!\n"); + printk(BIOS_DEBUG, "\nTimeout while waiting for M3885 command!\n"); } /* If it was a read function: Pin state */ diff --git a/src/mainboard/roda/rk886ex/mainboard.c b/src/mainboard/roda/rk886ex/mainboard.c index a82553f126..1594241c23 100644 --- a/src/mainboard/roda/rk886ex/mainboard.c +++ b/src/mainboard/roda/rk886ex/mainboard.c @@ -48,7 +48,7 @@ static void backlight_enable(void) m3885_gpio(M3885_GPIO_PULSE|M3885_GPIO_TOGGLE|M3885_GPIO_P56); } #endif - printk_debug("Display I/O: 0x%02x\n", inb(0x60f)); + printk(BIOS_DEBUG, "Display I/O: 0x%02x\n", inb(0x60f)); } #if CONFIG_PCI_OPTION_ROM_RUN_YABEL @@ -65,7 +65,7 @@ static int int15_handler(void) #define BOOT_DISPLAY_EFP2 (1 << 6) #define BOOT_DISPLAY_LCD2 (1 << 7) - printk_debug("%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX); switch (M.x86.R_AX) { @@ -103,13 +103,13 @@ static void dump_runtime_registers(void) { int i; - printk_debug("SuperIO runtime register block:\n"); + printk(BIOS_DEBUG, "SuperIO runtime register block:\n"); for (i=0; i<0x10; i++) - printk_debug("%02x ", i); - printk_debug("\n"); + printk(BIOS_DEBUG, "%02x ", i); + printk(BIOS_DEBUG, "\n"); for (i=0; i<0x10; i++) - printk_debug("%02x ", inb(0x600 +i)); - printk_debug("\n"); + printk(BIOS_DEBUG, "%02x ", inb(0x600 +i)); + printk(BIOS_DEBUG, "\n"); } #endif diff --git a/src/mainboard/roda/rk886ex/mainboard_smi.c b/src/mainboard/roda/rk886ex/mainboard_smi.c index e0ba6b9d31..dc1a7a7d08 100644 --- a/src/mainboard/roda/rk886ex/mainboard_smi.c +++ b/src/mainboard/roda/rk886ex/mainboard_smi.c @@ -33,7 +33,7 @@ int mainboard_io_trap_handler(int smif) { switch (smif) { case 0x99: - printk_debug("Sample\n"); + printk(BIOS_DEBUG, "Sample\n"); //gnvs->smif = 0; break; default: diff --git a/src/mainboard/roda/rk886ex/mptable.c b/src/mainboard/roda/rk886ex/mptable.c index 4764320f48..1186c3242b 100644 --- a/src/mainboard/roda/rk886ex/mptable.c +++ b/src/mainboard/roda/rk886ex/mptable.c @@ -118,7 +118,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c index 1f4b856727..4052c3277a 100644 --- a/src/mainboard/roda/rk886ex/romstage.c +++ b/src/mainboard/roda/rk886ex/romstage.c @@ -58,7 +58,7 @@ #include "southbridge/intel/i82801gx/i82801gx.h" static void setup_ich7_gpios(void) { - printk_debug(" GPIOS..."); + printk(BIOS_DEBUG, " GPIOS..."); /* General Registers */ outl(0xbfc0f7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ outl(0x70a87d83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ @@ -304,7 +304,7 @@ void real_main(unsigned long bist) report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk_debug("soft reset detected.\n"); + printk(BIOS_DEBUG, "soft reset detected.\n"); boot_mode = 1; } @@ -318,10 +318,10 @@ void real_main(unsigned long bist) /* Read PM1_CNT */ reg32 = inl(DEFAULT_PMBASE + 0x04); - printk_debug("PM1_CNT: %08x\n", reg32); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); if (((reg32 >> 10) & 7) == 5) { #if CONFIG_HAVE_ACPI_RESUME - printk_debug("Resume from S3 detected.\n"); + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); boot_mode = 2; /* Clear SLP_TYPE. This will break stage2 but * we care for that when we get there. @@ -329,7 +329,7 @@ void real_main(unsigned long bist) outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); #else - printk_debug("Resume from S3 detected, but disabled.\n"); + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); #endif } @@ -365,7 +365,7 @@ void real_main(unsigned long bist) /* This will not work if TSEG is in place! */ u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c); - printk_debug("TOM: 0x%08x\n", tom); + printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); ram_check(0x00000000, 0x000a0000); ram_check(0x00100000, tom); } diff --git a/src/mainboard/roda/rk886ex/rtl8168.c b/src/mainboard/roda/rk886ex/rtl8168.c index 18f41fe32a..e278bcfb4e 100644 --- a/src/mainboard/roda/rk886ex/rtl8168.c +++ b/src/mainboard/roda/rk886ex/rtl8168.c @@ -27,7 +27,7 @@ static void nic_init(struct device *dev) { - printk_debug("Initializing RTL8168 Gigabit Ethernet\n"); + printk(BIOS_DEBUG, "Initializing RTL8168 Gigabit Ethernet\n"); // Nothing to do yet, but this has to be here to keep // coreboot from trying to execute an option ROM. } diff --git a/src/mainboard/sunw/ultra40/get_bus_conf.c b/src/mainboard/sunw/ultra40/get_bus_conf.c index 7af7491243..6271130961 100644 --- a/src/mainboard/sunw/ultra40/get_bus_conf.c +++ b/src/mainboard/sunw/ultra40/get_bus_conf.c @@ -102,7 +102,7 @@ void get_bus_conf(void) #endif } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; #if 0 @@ -120,7 +120,7 @@ void get_bus_conf(void) bus_ck804_3++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); bus_ck804_3 = bus_ck804_2+1; } @@ -132,7 +132,7 @@ void get_bus_conf(void) bus_ck804_4++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); bus_ck804_4 = bus_ck804_3+1; } @@ -145,7 +145,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); bus_ck804_5 = bus_ck804_4+1; } @@ -156,7 +156,7 @@ void get_bus_conf(void) bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (pci1234[1] >> 16) & 0xff; @@ -168,7 +168,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -181,7 +181,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; } @@ -198,7 +198,7 @@ void get_bus_conf(void) bus_ck804b_2++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); bus_ck804b_1 = bus_ck804b_0+1; bus_ck804b_2 = bus_ck804b_0+2; @@ -211,7 +211,7 @@ void get_bus_conf(void) bus_ck804b_3++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); bus_ck804b_2 = bus_ck804b_0+1; bus_ck804b_3 = bus_ck804b_0+2; @@ -224,7 +224,7 @@ void get_bus_conf(void) bus_ck804b_4++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); bus_ck804b_4 = bus_ck804b_3+1; } @@ -235,7 +235,7 @@ void get_bus_conf(void) bus_ck804b_5++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); bus_ck804b_5 = bus_ck804b_4+1; } @@ -248,7 +248,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); #if 1 bus_ck804b_5 = bus_ck804b_4+1; #endif diff --git a/src/mainboard/sunw/ultra40/irq_tables.c b/src/mainboard/sunw/ultra40/irq_tables.c index 2d2230ef22..c5a9059366 100644 --- a/src/mainboard/sunw/ultra40/irq_tables.c +++ b/src/mainboard/sunw/ultra40/irq_tables.c @@ -71,7 +71,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -173,7 +173,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/sunw/ultra40/mptable.c b/src/mainboard/sunw/ultra40/mptable.c index 674dbdc6bf..68bab550b4 100644 --- a/src/mainboard/sunw/ultra40/mptable.c +++ b/src/mainboard/sunw/ultra40/mptable.c @@ -226,7 +226,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/h8dme/get_bus_conf.c b/src/mainboard/supermicro/h8dme/get_bus_conf.c index 3402d9d5f6..8954829b68 100644 --- a/src/mainboard/supermicro/h8dme/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dme/get_bus_conf.c @@ -114,7 +114,7 @@ void get_bus_conf(void) bus_mcp55[2]++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); bus_mcp55[1] = 2; bus_mcp55[2] = 3; @@ -128,7 +128,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); bus_isa = bus_mcp55[i-1]+1; } } diff --git a/src/mainboard/supermicro/h8dme/irq_tables.c b/src/mainboard/supermicro/h8dme/irq_tables.c index 49c7c99b22..4aaf1497f0 100644 --- a/src/mainboard/supermicro/h8dme/irq_tables.c +++ b/src/mainboard/supermicro/h8dme/irq_tables.c @@ -75,7 +75,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -112,7 +112,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/supermicro/h8dme/mptable.c b/src/mainboard/supermicro/h8dme/mptable.c index e611b9a622..64ffbb71a2 100644 --- a/src/mainboard/supermicro/h8dme/mptable.c +++ b/src/mainboard/supermicro/h8dme/mptable.c @@ -162,7 +162,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c index 4b08206a0f..3219cd25e8 100644 --- a/src/mainboard/supermicro/h8dme/romstage.c +++ b/src/mainboard/supermicro/h8dme/romstage.c @@ -102,7 +102,7 @@ static void dump_smbus_registers(void) int j; if (smbus_read_byte(device, 0) < 0) continue; - printk_debug("smbus: %02x", device); + printk(BIOS_DEBUG, "smbus: %02x", device); for (j = 0; j < 256; j++) { int status; unsigned char byte; @@ -111,10 +111,10 @@ static void dump_smbus_registers(void) break; } if ((j & 0xf) == 0) { - printk_debug("\r\n%02x: ", j); + printk(BIOS_DEBUG, "\r\n%02x: ", j); } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\r\n"); } diff --git a/src/mainboard/supermicro/h8dmr/get_bus_conf.c b/src/mainboard/supermicro/h8dmr/get_bus_conf.c index 3402d9d5f6..8954829b68 100644 --- a/src/mainboard/supermicro/h8dmr/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dmr/get_bus_conf.c @@ -114,7 +114,7 @@ void get_bus_conf(void) bus_mcp55[2]++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); bus_mcp55[1] = 2; bus_mcp55[2] = 3; @@ -128,7 +128,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); bus_isa = bus_mcp55[i-1]+1; } } diff --git a/src/mainboard/supermicro/h8dmr/irq_tables.c b/src/mainboard/supermicro/h8dmr/irq_tables.c index 49c7c99b22..4aaf1497f0 100644 --- a/src/mainboard/supermicro/h8dmr/irq_tables.c +++ b/src/mainboard/supermicro/h8dmr/irq_tables.c @@ -75,7 +75,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -112,7 +112,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/supermicro/h8dmr/mptable.c b/src/mainboard/supermicro/h8dmr/mptable.c index e611b9a622..64ffbb71a2 100644 --- a/src/mainboard/supermicro/h8dmr/mptable.c +++ b/src/mainboard/supermicro/h8dmr/mptable.c @@ -162,7 +162,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c index 79520bdcf3..6604efff22 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c @@ -102,7 +102,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -111,7 +111,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -124,7 +124,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ diff --git a/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c b/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c index 82a53c1705..e9bf8c46f7 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c +++ b/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be between 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -131,7 +131,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/supermicro/h8dmr_fam10/mptable.c b/src/mainboard/supermicro/h8dmr_fam10/mptable.c index cc7a607cb0..8a30fe65bf 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/mptable.c +++ b/src/mainboard/supermicro/h8dmr_fam10/mptable.c @@ -149,7 +149,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c index 0648105d22..98d9e9f45d 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c +++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c @@ -197,17 +197,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) uart_init(); console_init(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Halt if there was a built in self test failure */ report_bist_failure(bist); val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x \n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x \n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x \n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -238,7 +238,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); wait_all_other_cores_started(bsp_apicid); @@ -248,7 +248,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only * need to be done once.*/ @@ -266,7 +266,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); #endif wants_reset = mcp55_early_setup_x(); @@ -279,17 +279,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } if (wants_reset) - printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); post_code(0x3B); /* It's the time to set ctrl in sysinfo now; */ -printk_debug("fill_mem_ctrl()\n"); +printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); -//printk_debug("enable_smbus()\n"); +//printk(BIOS_DEBUG, "enable_smbus()\n"); // enable_smbus(); /* enable in sio_setup */ post_code(0x3E); @@ -299,11 +299,11 @@ post_code(0x3E); post_code(0x40); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); -// printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); +// printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x42); // Should never see this post code. diff --git a/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c index effb614cf2..2ee436b9e7 100644 --- a/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c +++ b/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c @@ -108,7 +108,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -117,7 +117,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -143,7 +143,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ diff --git a/src/mainboard/supermicro/h8qme_fam10/irq_tables.c b/src/mainboard/supermicro/h8qme_fam10/irq_tables.c index ec59d9ed86..26fcb4ace1 100644 --- a/src/mainboard/supermicro/h8qme_fam10/irq_tables.c +++ b/src/mainboard/supermicro/h8qme_fam10/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be between 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -131,7 +131,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/supermicro/h8qme_fam10/mptable.c b/src/mainboard/supermicro/h8qme_fam10/mptable.c index edf7b7364f..fa59c9f498 100644 --- a/src/mainboard/supermicro/h8qme_fam10/mptable.c +++ b/src/mainboard/supermicro/h8qme_fam10/mptable.c @@ -146,7 +146,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c index 45989aa5eb..ae20cdd53c 100644 --- a/src/mainboard/supermicro/h8qme_fam10/romstage.c +++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c @@ -241,16 +241,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) uart_init(); console_init(); write_GPIO(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Halt if there was a built in self test failure */ report_bist_failure(bist); val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x \n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x \n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x \n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -281,7 +281,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); wait_all_other_cores_started(bsp_apicid); @@ -291,7 +291,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only * need to be done once.*/ @@ -309,7 +309,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); #endif wants_reset = mcp55_early_setup_x(); @@ -322,17 +322,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } if (wants_reset) - printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); post_code(0x3B); /* It's the time to set ctrl in sysinfo now; */ -printk_debug("fill_mem_ctrl()\n"); +printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); -//printk_debug("enable_smbus()\n"); +//printk(BIOS_DEBUG, "enable_smbus()\n"); // enable_smbus(); /* enable in sio_setup */ post_code(0x3E); @@ -342,11 +342,11 @@ post_code(0x3E); post_code(0x40); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); -// printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); +// printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x42); // Should never see this post code. diff --git a/src/mainboard/supermicro/x6dai_g/mptable.c b/src/mainboard/supermicro/x6dai_g/mptable.c index 9d793c44a6..aad8856272 100644 --- a/src/mainboard/supermicro/x6dai_g/mptable.c +++ b/src/mainboard/supermicro/x6dai_g/mptable.c @@ -44,7 +44,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_6300 = 5; bus_isa = 6; } @@ -128,7 +128,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/x6dhe_g/mptable.c b/src/mainboard/supermicro/x6dhe_g/mptable.c index ea8f3590a5..2b5995bc0e 100644 --- a/src/mainboard/supermicro/x6dhe_g/mptable.c +++ b/src/mainboard/supermicro/x6dhe_g/mptable.c @@ -45,7 +45,7 @@ void *smp_write_config_table(void *v) bus_esb6300_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 0:1c.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1c.0, using defaults\n"); bus_esb6300_2 = 6; } @@ -57,7 +57,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_esb6300_1 = 7; bus_isa = 8; @@ -69,7 +69,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.1, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n"); bus_pxhd_1 = 2; } @@ -80,7 +80,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_pxhd_2 = 3; } @@ -108,8 +108,8 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.1\n"); - printk_debug("CONFIG_DEBUG: Dev= %p\n", dev); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n"); + printk(BIOS_DEBUG, "CONFIG_DEBUG: Dev= %p\n", dev); } /* PXHd apic 5 */ dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); @@ -120,8 +120,8 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.3\n"); - printk_debug("CONFIG_DEBUG: Dev= %p\n", dev); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n"); + printk(BIOS_DEBUG, "CONFIG_DEBUG: Dev= %p\n", dev); } } @@ -188,7 +188,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/x6dhe_g2/mptable.c b/src/mainboard/supermicro/x6dhe_g2/mptable.c index ea8f3590a5..2b5995bc0e 100644 --- a/src/mainboard/supermicro/x6dhe_g2/mptable.c +++ b/src/mainboard/supermicro/x6dhe_g2/mptable.c @@ -45,7 +45,7 @@ void *smp_write_config_table(void *v) bus_esb6300_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 0:1c.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1c.0, using defaults\n"); bus_esb6300_2 = 6; } @@ -57,7 +57,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_esb6300_1 = 7; bus_isa = 8; @@ -69,7 +69,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.1, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n"); bus_pxhd_1 = 2; } @@ -80,7 +80,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_pxhd_2 = 3; } @@ -108,8 +108,8 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.1\n"); - printk_debug("CONFIG_DEBUG: Dev= %p\n", dev); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n"); + printk(BIOS_DEBUG, "CONFIG_DEBUG: Dev= %p\n", dev); } /* PXHd apic 5 */ dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); @@ -120,8 +120,8 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.3\n"); - printk_debug("CONFIG_DEBUG: Dev= %p\n", dev); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n"); + printk(BIOS_DEBUG, "CONFIG_DEBUG: Dev= %p\n", dev); } } @@ -188,7 +188,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/x6dhr_ig/mptable.c b/src/mainboard/supermicro/x6dhr_ig/mptable.c index 7c13b8fd32..fd80a52492 100644 --- a/src/mainboard/supermicro/x6dhr_ig/mptable.c +++ b/src/mainboard/supermicro/x6dhr_ig/mptable.c @@ -48,7 +48,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1f.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1f.0, using defaults\n"); bus_ich5r_1 = 9; bus_isa = 10; @@ -60,7 +60,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.1, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n"); bus_pxhd_1 = 3; } @@ -71,7 +71,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_pxhd_2 = 4; } @@ -83,7 +83,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.1, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n"); bus_pxhd_3 = 6; } @@ -94,7 +94,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_pxhd_4 = 7; } @@ -122,7 +122,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 2:00.1\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 2:00.1\n"); } /* pxhd apic 4 */ dev = dev_find_slot(2, PCI_DEVFN(0x00,3)); @@ -133,7 +133,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 2:00.3\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 2:00.3\n"); } /* pxhd apic 5 */ dev = dev_find_slot(5, PCI_DEVFN(0x00,1)); @@ -144,7 +144,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 5:00.1\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 5:00.1\n"); } /* pxhd apic 8 */ dev = dev_find_slot(5, PCI_DEVFN(0x00,3)); @@ -155,7 +155,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 5:00.3\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 5:00.3\n"); } } @@ -222,7 +222,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/supermicro/x6dhr_ig2/mptable.c b/src/mainboard/supermicro/x6dhr_ig2/mptable.c index 61ece13f5a..f71114446e 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/mptable.c +++ b/src/mainboard/supermicro/x6dhr_ig2/mptable.c @@ -48,7 +48,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); bus_ich5r_1 = 7; bus_isa = 8; @@ -60,7 +60,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.0, using defaults\n"); bus_pxhd_1 = 2; } @@ -71,7 +71,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:00.2, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.2, using defaults\n"); bus_pxhd_2 = 3; } @@ -83,7 +83,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 0:04.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:04.0, using defaults\n"); bus_pxhd_3 = 5; } @@ -94,7 +94,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 0:06.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 0:06.0, using defaults\n"); bus_pxhd_4 = 6; } @@ -122,7 +122,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.1\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n"); } /* pxhd apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); @@ -133,7 +133,7 @@ void *smp_write_config_table(void *v) } } else { - printk_debug("ERROR - could not find IOAPIC PCI 1:00.3\n"); + printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n"); } } /* ISA backward compatibility interrupts */ @@ -205,7 +205,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/technexion/tim5690/acpi_tables.c b/src/mainboard/technexion/tim5690/acpi_tables.c index f450b7c4bf..b77a3bd507 100644 --- a/src/mainboard/technexion/tim5690/acpi_tables.c +++ b/src/mainboard/technexion/tim5690/acpi_tables.c @@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for (i = start; i < end; i++) { if ((i & 0xf) == 0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start) #if 0 /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current += slit->header.length; @@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start) } else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; ssdtx = (acpi_header_t *) current; switch (sysconf.hcid[i]) { @@ -243,20 +243,20 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -264,28 +264,28 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/technexion/tim5690/fadt.c b/src/mainboard/technexion/tim5690/fadt.c index e7bc017bbd..5d28790b4d 100644 --- a/src/mainboard/technexion/tim5690/fadt.c +++ b/src/mainboard/technexion/tim5690/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/technexion/tim5690/irq_tables.c b/src/mainboard/technexion/tim5690/irq_tables.c index 38479aac14..8457745724 100644 --- a/src/mainboard/technexion/tim5690/irq_tables.c +++ b/src/mainboard/technexion/tim5690/irq_tables.c @@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c index 8ca3f4c8f5..25e9e07e29 100644 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ b/src/mainboard/technexion/tim5690/mainboard.c @@ -146,7 +146,7 @@ static void set_thermal_config(void) byte = ADT7461_read_byte(0x02); /* read status register to clear it */ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); /* sb600 settings for thermal config */ /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -245,7 +245,7 @@ void tim5690_enable(device_t dev) u16 gpio_base = IT8712F_SIMPLE_IO_BASE; u8 port2; - printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev); mb_gpio_init(&gpio_base); @@ -261,12 +261,12 @@ void tim5690_enable(device_t dev) /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -288,7 +288,7 @@ void tim5690_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -306,7 +306,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c index ee4a2ff761..a918dac675 100644 --- a/src/mainboard/technexion/tim5690/mptable.c +++ b/src/mainboard/technexion/tim5690/mptable.c @@ -199,7 +199,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c index 2cd8ebec5b..1546233bf0 100644 --- a/src/mainboard/technexion/tim5690/romstage.c +++ b/src/mainboard/technexion/tim5690/romstage.c @@ -141,7 +141,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); setup_tim5690_resource_map(); @@ -167,7 +167,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Read FIDVID_STATUS */ msr=rdmsr(0xc0010042); - printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); enable_fid_change(); enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); @@ -175,16 +175,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010042); - printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); } else { - printk_debug("Changing FIDVID not supported\n"); + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); } needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); - printk_debug("needs_reset=0x%x\n", needs_reset); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); if (needs_reset) { @@ -198,7 +198,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now; */ - printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); diff --git a/src/mainboard/technexion/tim8690/acpi_tables.c b/src/mainboard/technexion/tim8690/acpi_tables.c index f450b7c4bf..b77a3bd507 100644 --- a/src/mainboard/technexion/tim8690/acpi_tables.c +++ b/src/mainboard/technexion/tim8690/acpi_tables.c @@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for (i = start; i < end; i++) { if ((i & 0xf) == 0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start) #if 0 /* SRAT */ - printk_debug("ACPI: * SRAT\n"); + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); /* SLIT */ - printk_debug("ACPI: * SLIT\n"); + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); slit = (acpi_slit_t *) current; acpi_create_slit(slit); current += slit->header.length; @@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* SSDT */ - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start) } else { c = (uint8_t) ('A' + i - 1 - 6); } - printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; ssdtx = (acpi_header_t *) current; switch (sysconf.hcid[i]) { @@ -243,20 +243,20 @@ unsigned long write_acpi_tables(unsigned long start) #endif /* FACS */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -264,28 +264,28 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); + printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk_debug("rsdt\n"); + printk(BIOS_DEBUG, "rsdt\n"); dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk_debug("madt\n"); + printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk_debug("srat\n"); + printk(BIOS_DEBUG, "srat\n"); dump_mem(srat, ((void *)srat) + srat->header.length); - printk_debug("slit\n"); + printk(BIOS_DEBUG, "slit\n"); dump_mem(slit, ((void *)slit) + slit->header.length); - printk_debug("ssdt\n"); + printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk_debug("fadt\n"); + printk(BIOS_DEBUG, "fadt\n"); dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/technexion/tim8690/fadt.c b/src/mainboard/technexion/tim8690/fadt.c index e7bc017bbd..5d28790b4d 100644 --- a/src/mainboard/technexion/tim8690/fadt.c +++ b/src/mainboard/technexion/tim8690/fadt.c @@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) acpi_header_t *header = &(fadt->header); pm_base &= 0xFFFF; - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/mainboard/technexion/tim8690/irq_tables.c b/src/mainboard/technexion/tim8690/irq_tables.c index 38479aac14..8457745724 100644 --- a/src/mainboard/technexion/tim8690/irq_tables.c +++ b/src/mainboard/technexion/tim8690/irq_tables.c @@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (u8 *) (addr); @@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("write_pirq_routing_table done.\n"); + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); return (unsigned long)pirq_info; } diff --git a/src/mainboard/technexion/tim8690/mainboard.c b/src/mainboard/technexion/tim8690/mainboard.c index c607167bcb..977196beb5 100644 --- a/src/mainboard/technexion/tim8690/mainboard.c +++ b/src/mainboard/technexion/tim8690/mainboard.c @@ -60,7 +60,7 @@ static void enable_onboard_nic() u8 byte; device_t sm_dev; - printk_info("enable_onboard_nic.\n"); + printk(BIOS_INFO, "enable_onboard_nic.\n"); sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); @@ -97,7 +97,7 @@ static void set_thermal_config() byte = ADT7461_read_byte(0x02); /* read status register to clear it */ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); /* sb600 settings for thermal config */ /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -150,19 +150,19 @@ void tim8690_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard tim8690 Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -184,7 +184,7 @@ void tim8690_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -203,7 +203,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/technexion/tim8690/mptable.c b/src/mainboard/technexion/tim8690/mptable.c index 6359c09934..d8ce32833d 100644 --- a/src/mainboard/technexion/tim8690/mptable.c +++ b/src/mainboard/technexion/tim8690/mptable.c @@ -199,7 +199,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c index 38c8ba0ab1..e3a98f78fa 100644 --- a/src/mainboard/technexion/tim8690/romstage.c +++ b/src/mainboard/technexion/tim8690/romstage.c @@ -136,7 +136,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); setup_tim8690_resource_map(); @@ -162,7 +162,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Read FIDVID_STATUS */ msr=rdmsr(0xc0010042); - printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); enable_fid_change(); enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); @@ -170,16 +170,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010042); - printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); } else { - printk_debug("Changing FIDVID not supported\n"); + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); } needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); - printk_debug("needs_reset=0x%x\n", needs_reset); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); if (needs_reset) { @@ -190,7 +190,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now; */ - printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c index 29a08f5784..a9b6185dd2 100644 --- a/src/mainboard/technologic/ts5300/mainboard.c +++ b/src/mainboard/technologic/ts5300/mainboard.c @@ -23,10 +23,10 @@ static void irqdump() -1}; mmcr = (void *) 0xfffef000; - printk_err("mmcr is %p\n", mmcr); + printk(BIOS_ERR, "mmcr is %p\n", mmcr); for(i = 0; irqlist[i] >= 0; i++) { irq = mmcr + irqlist[i]; - printk_err("0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq); + printk(BIOS_ERR, "0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq); } } @@ -39,14 +39,14 @@ static void enable_dev(struct device *dev) { volatile struct mmcr *mmcr = MMCRDEFAULT; /* currently, nothing in the device to use, so ignore it. */ - printk_err("Technologic Systems 5300 ENTER %s\n", __func__); + printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__); /* from fuctory bios */ /* NOTE: the following interrupt settings made interrupts work * for hard drive, and serial, but not for ethernet */ - printk_err("Setting up PIC\n"); + printk(BIOS_ERR, "Setting up PIC\n"); /* just do what they say and nobody gets hurt. */ mmcr->pic.pcicr = 0 ; /* all ints to level */ @@ -77,7 +77,7 @@ static void enable_dev(struct device *dev) { // irqdump(); - printk_err("Setting up sysarb\n"); + printk(BIOS_ERR, "Setting up sysarb\n"); mmcr->dbctl.dbctl = 0x01; mmcr->sysarb.ctl = 0x00; mmcr->sysarb.menb = 0x1f; @@ -90,7 +90,7 @@ static void enable_dev(struct device *dev) { mmcr->hostbridge.mstirqctl = 0x0; mmcr->hostbridge.mstirqsta = 0x708; - printk_err("Setting up pio\n"); + printk(BIOS_ERR, "Setting up pio\n"); /* pio */ mmcr->pio.pfs15_0 = 0xffff; mmcr->pio.pfs31_16 = 0xffff; @@ -100,7 +100,7 @@ static void enable_dev(struct device *dev) { mmcr->pio.data15_0 = 0xde04; mmcr->pio.data31_16 = 0xef9f; - printk_err("Setting up sysmap\n"); + printk(BIOS_ERR, "Setting up sysmap\n"); /* system memory map */ mmcr->sysmap.adddecctl = 0x04; mmcr->sysmap.wpvsta = 0x8006; @@ -116,7 +116,7 @@ static void enable_dev(struct device *dev) { mmcr->sysmap.par[13] = 0x8a07c940; mmcr->sysmap.par[15] = 0xee00400e; - printk_err("Setting up gpctl\n"); + printk(BIOS_ERR, "Setting up gpctl\n"); mmcr->gpctl.gpcsrt = 0x01; mmcr->gpctl.gpcspw = 0x09; mmcr->gpctl.gpcsoff = 0x01; @@ -138,7 +138,7 @@ static void enable_dev(struct device *dev) { mmcr->dmacontrol.extchanmapa = 0xf210; mmcr->dmacontrol.extchanmapb = 0xffff; - printk_err("TS5300 EXIT %s\n", __func__); + printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__); } struct chip_operations mainboard_ops = { diff --git a/src/mainboard/thomson/ip1000/mainboard_smi.c b/src/mainboard/thomson/ip1000/mainboard_smi.c index 39842e0adc..8cfefaebe3 100644 --- a/src/mainboard/thomson/ip1000/mainboard_smi.c +++ b/src/mainboard/thomson/ip1000/mainboard_smi.c @@ -26,6 +26,6 @@ int mainboard_io_trap_handler(int smif) { - printk_debug("MAINBOARD IO TRAP HANDLER!\n"); + printk(BIOS_DEBUG, "MAINBOARD IO TRAP HANDLER!\n"); return 1; } diff --git a/src/mainboard/tyan/s2735/mptable.c b/src/mainboard/tyan/s2735/mptable.c index 35baeb31ce..eb6b94aba2 100644 --- a/src/mainboard/tyan/s2735/mptable.c +++ b/src/mainboard/tyan/s2735/mptable.c @@ -154,7 +154,7 @@ Compatibility Bus Address /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c index 6bcb459236..c4450ebb38 100644 --- a/src/mainboard/tyan/s2735/romstage.c +++ b/src/mainboard/tyan/s2735/romstage.c @@ -145,7 +145,7 @@ void amd64_main(unsigned long bist) : "=a" (v_esp) ); #if CONFIG_USE_INIT - printk_debug("v_esp=%08x\r\n", v_esp); + printk(BIOS_DEBUG, "v_esp=%08x\r\n", v_esp); #else print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); #endif @@ -157,7 +157,7 @@ void amd64_main(unsigned long bist) cpu_reset_x: #if CONFIG_USE_INIT - printk_debug("cpu_reset = %08x\r\n",cpu_reset); + printk(BIOS_DEBUG, "cpu_reset = %08x\r\n",cpu_reset); #else print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); #endif @@ -206,7 +206,7 @@ cpu_reset_x: print_debug("Use Ram as Stack now - \r\n"); } #if CONFIG_USE_INIT - printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); + printk(BIOS_DEBUG, "new_cpu_reset = %08x\r\n", new_cpu_reset); #else print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); #endif diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c index fe175795e2..93ca67545e 100644 --- a/src/mainboard/tyan/s2850/mptable.c +++ b/src/mainboard/tyan/s2850/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -81,7 +81,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } /* 8111 */ @@ -92,7 +92,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8111_1 = 2; bus_isa = 3; @@ -194,7 +194,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2875/mptable.c b/src/mainboard/tyan/s2875/mptable.c index 394410b5ba..5f0ac0a3ac 100644 --- a/src/mainboard/tyan/s2875/mptable.c +++ b/src/mainboard/tyan/s2875/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -81,7 +81,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -91,10 +91,10 @@ void *smp_write_config_table(void *v) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; - printk_debug("bus_isa=%d\n",bus_isa); + printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 3; bus_isa = 4; @@ -103,11 +103,11 @@ void *smp_write_config_table(void *v) dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk_debug("bus_8151_1=%d\n",bus_8151_1); + printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8151_1 = 2; } @@ -209,7 +209,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2880/mptable.c b/src/mainboard/tyan/s2880/mptable.c index d013a463fa..6da67170b5 100644 --- a/src/mainboard/tyan/s2880/mptable.c +++ b/src/mainboard/tyan/s2880/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -86,7 +86,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -98,7 +98,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -110,7 +110,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -121,7 +121,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -237,7 +237,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index 1ed1e0dbaa..063515c27f 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -85,11 +85,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); } /* 8131-1 */ @@ -98,7 +98,7 @@ void get_bus_conf(void) bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); } /* 8132-2 */ @@ -108,11 +108,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); } diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index c428ec5dee..b61b269024 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -58,7 +58,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -100,7 +100,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index 1c86e86f73..5866577ce4 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -41,7 +41,7 @@ static void adt7463_init(device_t dev) smbus_dev = dev_find_device(0x1022, 0x746b, 0); if (!smbus_dev) die("SMBus controller not found\n"); - printk_debug("SMBus controller found\n"); + printk(BIOS_DEBUG, "SMBus controller found\n"); /* Find the ADT7463 device. */ path.type = DEVICE_PATH_I2C; @@ -49,7 +49,7 @@ static void adt7463_init(device_t dev) adt7463 = find_dev_path(smbus_dev->link, &path); if (!adt7463) die("ADT7463 not found\n"); - printk_debug("ADT7463 found\n"); + printk(BIOS_DEBUG, "ADT7463 found\n"); /* Set all fans to 'Fastest Speed Calculated by All 3 Temperature * Channels Controls PWMx'. @@ -95,7 +95,7 @@ static void adt7463_init(device_t dev) /* Set TACH measurements to normal (1/second). */ result = smbus_write_byte(adt7463, 0x78, 0xf0); - printk_debug("ADT7463 properly initialized\n"); + printk(BIOS_DEBUG, "ADT7463 properly initialized\n"); } static void dummy_noop(device_t dummy) @@ -117,7 +117,7 @@ static unsigned int scan_root_bus(device_t root, unsigned int max) max = root_dev_scan_bus(root, max); - printk_debug("scan_root_bus ok\n"); + printk(BIOS_DEBUG, "scan_root_bus ok\n"); /* The following is a little silly. We need a hook into the boot * process *after* the ADT7463 device has been initialized. So we @@ -128,7 +128,7 @@ static unsigned int scan_root_bus(device_t root, unsigned int max) link_i = root->links; if (link_i >= MAX_LINKS) { - printk_debug("Reached MAX_LINKS, not configuring ADT7463"); + printk(BIOS_DEBUG, "Reached MAX_LINKS, not configuring ADT7463"); return max; } root->link[link_i].link = link_i; diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index e901416994..06f6f5903c 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -141,7 +141,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index e10f7632e6..b5c075e879 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -64,7 +64,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -115,7 +115,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -125,7 +125,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; } @@ -136,7 +136,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -147,7 +147,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -158,7 +158,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...\n", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...\n", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -197,67 +197,67 @@ unsigned long write_pirq_routing_table(unsigned long addr) } } - printk_debug("setting Onboard AMD Southbridge \n"); + printk(BIOS_DEBUG, "setting Onboard AMD Southbridge \n"); static const unsigned char slotIrqs_1_4[4] = { 5, 9, 11, 10 }; pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard AMD USB \n"); + printk(BIOS_DEBUG, "setting Onboard AMD USB \n"); static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); write_pirq_info(pirq_info, bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard ATI Display Adapter\n"); + printk(BIOS_DEBUG, "setting Onboard ATI Display Adapter\n"); static const unsigned char slotIrqs_8111_1_6[4] = { 11, 0, 0, 0 }; pci_assign_irqs(bus_8111_1, 6, slotIrqs_8111_1_6); write_pirq_info(pirq_info, bus_8111_1,(6<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 1\n"); + printk(BIOS_DEBUG, "setting Slot 1\n"); static const unsigned char slotIrqs_8131_2_3[4] = { 5, 9, 11, 10 }; pci_assign_irqs(bus_8131_2, 3, slotIrqs_8131_2_3); write_pirq_info(pirq_info, bus_8131_2,(3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 2\n"); + printk(BIOS_DEBUG, "setting Slot 2\n"); static const unsigned char slotIrqs_8131_2_1[4] = { 9, 11, 10, 5 }; pci_assign_irqs(bus_8131_2, 1, slotIrqs_8131_2_1); write_pirq_info(pirq_info, bus_8131_2,(1<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 3\n"); + printk(BIOS_DEBUG, "setting Slot 3\n"); static const unsigned char slotIrqs_8131_1_3[4] = { 10, 5, 9, 11 }; pci_assign_irqs(bus_8131_1, 3, slotIrqs_8131_1_3); write_pirq_info(pirq_info, bus_8131_1,(3<<3)|0, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x3, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 4\n"); + printk(BIOS_DEBUG, "setting Slot 4\n"); static const unsigned char slotIrqs_8131_1_2[4] = { 11, 10, 5, 9 }; pci_assign_irqs(bus_8131_1, 2, slotIrqs_8131_1_2); write_pirq_info(pirq_info, bus_8131_1,(2<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x4, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 5 \n"); + printk(BIOS_DEBUG, "setting Slot 5 \n"); static const unsigned char slotIrqs_8111_1_4[4] = { 5, 9, 11, 10 }; pci_assign_irqs(bus_8111_1, 4, slotIrqs_8111_1_4); write_pirq_info(pirq_info, bus_8111_1,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x5, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard SI Serial ATA\n"); + printk(BIOS_DEBUG, "setting Onboard SI Serial ATA\n"); static const unsigned char slotIrqs_8111_1_5[4] = { 10, 0, 0, 0 }; pci_assign_irqs(bus_8111_1, 5, slotIrqs_8111_1_5); write_pirq_info(pirq_info, bus_8111_1,(5<<3)|0, 0x4, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard Intel NIC\n"); + printk(BIOS_DEBUG, "setting Onboard Intel NIC\n"); static const unsigned char slotIrqs_8111_1_8[4] = { 11, 0, 0, 0 }; pci_assign_irqs(bus_8111_1, 8, slotIrqs_8111_1_8); write_pirq_info(pirq_info, bus_8111_1,(8<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard Adaptec SCSI\n"); + printk(BIOS_DEBUG, "setting Onboard Adaptec SCSI\n"); static const unsigned char slotIrqs_8131_1_6[4] = { 5, 9, 0, 0 }; pci_assign_irqs(bus_8131_1, 6, slotIrqs_8131_1_6); write_pirq_info(pirq_info, bus_8131_1,(6<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); @@ -268,7 +268,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info++; slot_num++; #endif - printk_debug("setting Onboard Broadcom NIC\n"); + printk(BIOS_DEBUG, "setting Onboard Broadcom NIC\n"); static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 }; pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9); write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); @@ -296,7 +296,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c index 6461a0be45..f546693ffb 100644 --- a/src/mainboard/tyan/s2882/mptable.c +++ b/src/mainboard/tyan/s2882/mptable.c @@ -31,7 +31,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -85,7 +85,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -97,7 +97,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -109,7 +109,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -120,7 +120,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -248,7 +248,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index eaf77cd569..22a5b760db 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -88,11 +88,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); } /* 8131-1 */ @@ -101,7 +101,7 @@ void get_bus_conf(void) bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); } /* 8132-2 */ @@ -111,12 +111,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); } /* HT chain 1 */ @@ -127,7 +127,7 @@ void get_bus_conf(void) if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -// printk_debug("bus_8151_1=%d\n",bus_8151_1); +// printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; } diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index 4fc12a04ac..590140e352 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -61,7 +61,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -105,7 +105,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index b126d2f60d..952ba69d2a 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -152,7 +152,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2891/acpi_tables.c b/src/mainboard/tyan/s2891/acpi_tables.c index 895a629911..303c3dd6e4 100644 --- a/src/mainboard/tyan/s2891/acpi_tables.c +++ b/src/mainboard/tyan/s2891/acpi_tables.c @@ -113,7 +113,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -131,21 +131,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 64); facs = (acpi_facs_t *) current; - printk_debug("ACPI: * FACS %p\n", facs); + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ current = ALIGN(current, 16); dsdt = (acpi_header_t *) current; - printk_debug("ACPI: * DSDT %p\n", dsdt); + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); current += ((acpi_header_t *) AmlCode)->length; memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); current = ALIGN(current, 16); fadt = (acpi_fadt_t *) current; - printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt); + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); current += sizeof(acpi_fadt_t); /* Add FADT now that we have facs and dsdt. */ @@ -154,21 +154,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 16); hpet = (acpi_hpet_t *) current; - printk_debug("ACPI: * HPET @ %p\n", hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); current = ALIGN(current, 16); madt = (acpi_madt_t *) current; - printk_debug("ACPI: * APIC/MADT @ %p\n", madt); + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); current = ALIGN(current, 16); srat = (acpi_srat_t *) current; - printk_debug("ACPI: * SRAT @ %p\n", srat); + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); @@ -176,7 +176,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ALIGN(current, 16); slit = (acpi_slit_t *) current; - printk_debug("ACPI: * SLIT @ %p\n", slit); + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); @@ -184,11 +184,11 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ALIGN(current, 16); ssdt = (acpi_header_t *)current; - printk_debug("ACPI: * SSDT @ %p\n", ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done %p.\n", (void *)current); + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); return current; } diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c index 779f8885d0..31afeb0f86 100644 --- a/src/mainboard/tyan/s2891/get_bus_conf.c +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -96,7 +96,7 @@ void get_bus_conf(void) bus_ck804_4++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; bus_ck804_4 = 3; @@ -109,7 +109,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); bus_ck804_5 = bus_ck804_4+1; } @@ -121,7 +121,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; @@ -133,7 +133,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -146,7 +146,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; bus_isa = bus_8131_1+2; diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c index c0e484a4f0..dc117f404b 100644 --- a/src/mainboard/tyan/s2891/irq_tables.c +++ b/src/mainboard/tyan/s2891/irq_tables.c @@ -67,7 +67,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -162,7 +162,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c index a03f117325..0e15df6f81 100644 --- a/src/mainboard/tyan/s2891/mptable.c +++ b/src/mainboard/tyan/s2891/mptable.c @@ -177,7 +177,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c index 228bd08b2e..07d0dd72cf 100644 --- a/src/mainboard/tyan/s2891/romstage.c +++ b/src/mainboard/tyan/s2891/romstage.c @@ -172,7 +172,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); if (needs_reset) { - printk_info("ht reset -\r\n"); + printk(BIOS_INFO, "ht reset -\r\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2892/acpi_tables.c b/src/mainboard/tyan/s2892/acpi_tables.c index 895a629911..303c3dd6e4 100644 --- a/src/mainboard/tyan/s2892/acpi_tables.c +++ b/src/mainboard/tyan/s2892/acpi_tables.c @@ -113,7 +113,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -131,21 +131,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 64); facs = (acpi_facs_t *) current; - printk_debug("ACPI: * FACS %p\n", facs); + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ current = ALIGN(current, 16); dsdt = (acpi_header_t *) current; - printk_debug("ACPI: * DSDT %p\n", dsdt); + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); current += ((acpi_header_t *) AmlCode)->length; memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); current = ALIGN(current, 16); fadt = (acpi_fadt_t *) current; - printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt); + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); current += sizeof(acpi_fadt_t); /* Add FADT now that we have facs and dsdt. */ @@ -154,21 +154,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 16); hpet = (acpi_hpet_t *) current; - printk_debug("ACPI: * HPET @ %p\n", hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); current = ALIGN(current, 16); madt = (acpi_madt_t *) current; - printk_debug("ACPI: * APIC/MADT @ %p\n", madt); + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); current = ALIGN(current, 16); srat = (acpi_srat_t *) current; - printk_debug("ACPI: * SRAT @ %p\n", srat); + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); @@ -176,7 +176,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ALIGN(current, 16); slit = (acpi_slit_t *) current; - printk_debug("ACPI: * SLIT @ %p\n", slit); + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); @@ -184,11 +184,11 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ALIGN(current, 16); ssdt = (acpi_header_t *)current; - printk_debug("ACPI: * SSDT @ %p\n", ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done %p.\n", (void *)current); + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); return current; } diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c index 4869b31c46..1a91b05822 100644 --- a/src/mainboard/tyan/s2892/get_bus_conf.c +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -93,7 +93,7 @@ void get_bus_conf(void) bus_ck804_4++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; bus_ck804_4 = 3; @@ -106,7 +106,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); bus_ck804_5 = bus_ck804_4+1; } @@ -118,7 +118,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; @@ -130,7 +130,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -143,7 +143,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; bus_isa = bus_8131_1+2; diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c index 094658669a..f76afc2fbb 100644 --- a/src/mainboard/tyan/s2892/irq_tables.c +++ b/src/mainboard/tyan/s2892/irq_tables.c @@ -65,7 +65,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -155,7 +155,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c index feb7cd63f9..1aff4c80ae 100644 --- a/src/mainboard/tyan/s2892/mptable.c +++ b/src/mainboard/tyan/s2892/mptable.c @@ -198,7 +198,7 @@ static void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c index 5eadda78e5..b482e95a3e 100644 --- a/src/mainboard/tyan/s2892/romstage.c +++ b/src/mainboard/tyan/s2892/romstage.c @@ -156,7 +156,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); if (needs_reset) { - printk_info("ht reset -\n"); + printk(BIOS_INFO, "ht reset -\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2895/acpi_tables.c b/src/mainboard/tyan/s2895/acpi_tables.c index 525a959fad..b7ff5bbce8 100644 --- a/src/mainboard/tyan/s2895/acpi_tables.c +++ b/src/mainboard/tyan/s2895/acpi_tables.c @@ -138,7 +138,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -156,21 +156,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 64); facs = (acpi_facs_t *) current; - printk_debug("ACPI: * FACS %p\n", facs); + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ current = ALIGN(current, 16); dsdt = (acpi_header_t *) current; - printk_debug("ACPI: * DSDT %p\n", dsdt); + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); current += ((acpi_header_t *) AmlCode)->length; memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); current = ALIGN(current, 16); fadt = (acpi_fadt_t *) current; - printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt); + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); current += sizeof(acpi_fadt_t); /* Add FADT now that we have facs and dsdt. */ @@ -179,21 +179,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 16); hpet = (acpi_hpet_t *) current; - printk_debug("ACPI: * HPET @ %p\n", hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); current = ALIGN(current, 16); madt = (acpi_madt_t *) current; - printk_debug("ACPI: * APIC/MADT @ %p\n", madt); + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); current = ALIGN(current, 16); srat = (acpi_srat_t *) current; - printk_debug("ACPI: * SRAT @ %p\n", srat); + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); @@ -201,7 +201,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ALIGN(current, 16); slit = (acpi_slit_t *) current; - printk_debug("ACPI: * SLIT @ %p\n", slit); + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); @@ -209,11 +209,11 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ALIGN(current, 16); ssdt = (acpi_header_t *)current; - printk_debug("ACPI: * SSDT @ %p\n", ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done %p.\n", (void *)current); + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); return current; } diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c index 04e9019355..cf918f0e9c 100644 --- a/src/mainboard/tyan/s2895/get_bus_conf.c +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -102,7 +102,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; bus_ck804_5 = 3; @@ -113,7 +113,7 @@ void get_bus_conf(void) bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; @@ -125,7 +125,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -138,7 +138,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; } @@ -155,7 +155,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); bus_ck804b_5 = bus_ck804b_4+1; bus_isa = bus_ck804b_5+1; } diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c index 468e9e5a39..414084c64a 100644 --- a/src/mainboard/tyan/s2895/irq_tables.c +++ b/src/mainboard/tyan/s2895/irq_tables.c @@ -72,7 +72,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -174,7 +174,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c index 23494f0763..46f28003fe 100644 --- a/src/mainboard/tyan/s2895/mptable.c +++ b/src/mainboard/tyan/s2895/mptable.c @@ -226,7 +226,7 @@ static void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2895/romstage.c b/src/mainboard/tyan/s2895/romstage.c index bb953edf54..542a1ec9df 100644 --- a/src/mainboard/tyan/s2895/romstage.c +++ b/src/mainboard/tyan/s2895/romstage.c @@ -200,7 +200,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); if (needs_reset) { - printk_info("ht reset -\n"); + printk(BIOS_INFO, "ht reset -\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c index 04f930fb12..40a1cc7718 100644 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ b/src/mainboard/tyan/s2912/get_bus_conf.c @@ -128,7 +128,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -137,7 +137,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -150,7 +150,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ diff --git a/src/mainboard/tyan/s2912/irq_tables.c b/src/mainboard/tyan/s2912/irq_tables.c index aad569b048..6c59500ff5 100644 --- a/src/mainboard/tyan/s2912/irq_tables.c +++ b/src/mainboard/tyan/s2912/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -122,7 +122,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2912/mptable.c b/src/mainboard/tyan/s2912/mptable.c index 8887cca3bf..aa9a7c6703 100644 --- a/src/mainboard/tyan/s2912/mptable.c +++ b/src/mainboard/tyan/s2912/mptable.c @@ -147,7 +147,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c index 7ee4944a9c..e2f721bace 100644 --- a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c +++ b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c @@ -101,7 +101,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -110,7 +110,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -123,7 +123,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c index ea870a147b..b3628b65c5 100644 --- a/src/mainboard/tyan/s2912_fam10/irq_tables.c +++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -131,7 +131,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2912_fam10/mptable.c b/src/mainboard/tyan/s2912_fam10/mptable.c index b2fae1f443..4bd6c124a9 100644 --- a/src/mainboard/tyan/s2912_fam10/mptable.c +++ b/src/mainboard/tyan/s2912_fam10/mptable.c @@ -147,7 +147,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c index 29e4060243..cee8c5952f 100644 --- a/src/mainboard/tyan/s2912_fam10/romstage.c +++ b/src/mainboard/tyan/s2912_fam10/romstage.c @@ -198,7 +198,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Halt if there was a built in self test failure */ report_bist_failure(bist); @@ -209,10 +209,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x\n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x\n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x\n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -243,7 +243,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); wait_all_other_cores_started(bsp_apicid); @@ -253,7 +253,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only * need to be done once.*/ @@ -271,7 +271,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); #endif wants_reset = mcp55_early_setup_x(); @@ -284,27 +284,27 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } if (wants_reset) - printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); post_code(0x3B); /* It's the time to set ctrl in sysinfo now; */ - printk_debug("fill_mem_ctrl()\n"); + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); - printk_debug("enable_smbus()\n"); + printk(BIOS_DEBUG, "enable_smbus()\n"); enable_smbus(); post_code(0x3E); memreset_setup(); post_code(0x40); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); - printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x43); // Should never see this post code. } diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c index a7ad8cc049..9a9eec7982 100644 --- a/src/mainboard/tyan/s4880/mptable.c +++ b/src/mainboard/tyan/s4880/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -85,7 +85,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 2); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -97,7 +97,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -109,7 +109,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -120,7 +120,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -246,7 +246,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c index cf7c59d993..92d71e4774 100644 --- a/src/mainboard/tyan/s4882/mptable.c +++ b/src/mainboard/tyan/s4882/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -86,7 +86,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 1); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -98,7 +98,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -110,7 +110,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -121,7 +121,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -246,7 +246,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/via/epia-m/acpi_tables.c b/src/mainboard/via/epia-m/acpi_tables.c index 3df2b1a121..7d7bc396eb 100644 --- a/src/mainboard/via/epia-m/acpi_tables.c +++ b/src/mainboard/via/epia-m/acpi_tables.c @@ -52,7 +52,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f ) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -69,7 +69,7 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); @@ -79,8 +79,8 @@ unsigned long write_acpi_tables(unsigned long start) memcpy((void *)dsdt,(void *)AmlCode, ((acpi_header_t *)AmlCode)->length); dsdt->checksum = 0; // don't trust intel iasl compiler to get this right dsdt->checksum = acpi_checksum(dsdt,dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -88,7 +88,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt,facs,dsdt); acpi_add_table(rsdp,fadt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c index bec7d6a2f4..0fe49fc46f 100644 --- a/src/mainboard/via/epia-m/mainboard.c +++ b/src/mainboard/via/epia-m/mainboard.c @@ -16,9 +16,9 @@ static void vga_fixup(void) { // that // - we need page 0 below for coreboot tables. - printk_debug("INSTALL REAL-MODE IDT\n"); + printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); - printk_debug("DO THE VGA BIOS\n"); + printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); do_vgabios(); post_code(0x93); vga_enable_console(); @@ -30,7 +30,7 @@ void write_protect_vgabios(void) { device_t dev; - printk_info("write_protect_vgabios\n"); + printk(BIOS_INFO, "write_protect_vgabios\n"); /* there are two possible devices. Just do both. */ dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3122, 0); if(dev) diff --git a/src/mainboard/via/epia-m/vgabios.c b/src/mainboard/via/epia-m/vgabios.c index 6954230d55..3af59547a8 100644 --- a/src/mainboard/via/epia-m/vgabios.c +++ b/src/mainboard/via/epia-m/vgabios.c @@ -349,17 +349,17 @@ void do_vgabios(void) dev = dev_find_class(PCI_CLASS_DISPLAY_VGA<<8 , 0); if (!dev) { - printk_debug("NO VGA FOUND\n"); + printk(BIOS_DEBUG, "NO VGA FOUND\n"); return; } - printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + printk(BIOS_DEBUG, "found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); /* declare rom address here - keep any config data out of the way * of core LXB stuff */ rom = (unsigned int)cbfs_load_optionrom(dev->vendor, dev->device, 0); pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1); - printk_debug("rom base, size: %x\n", rom); + printk(BIOS_DEBUG, "rom base, size: %x\n", rom); buf = (unsigned char *) rom; if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { @@ -371,13 +371,13 @@ void do_vgabios(void) buf = (unsigned char *) 0xc0000; if (buf[0]==0x55 && buf[1]==0xAA) { busdevfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; - printk_debug("bus/devfn = %#x\n", busdevfn); + printk(BIOS_DEBUG, "bus/devfn = %#x\n", busdevfn); real_mode_switch_call_vga(busdevfn); } else - printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + printk(BIOS_DEBUG, "Failed to copy VGA BIOS to 0xc0000\n"); } else - printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + printk(BIOS_DEBUG, "BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); pci_write_config32(dev, PCI_ROM_ADDRESS, 0); } @@ -562,28 +562,28 @@ int biosint(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); // cases in a good compiler are just as good as your own tables. switch (intnumber) { case 0 ... 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception %u\n", intnumber); + printk(BIOS_INFO, "biosint: Oops, exception %u\n", intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *) esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *) esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out\n"); + printk(BIOS_DEBUG, "biosint: Bailing out\n"); // "longjmp" vga_exit(); break; @@ -602,7 +602,7 @@ int biosint(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupport int #0x%x\n", + printk(BIOS_INFO, "BIOSINT: Unsupport int #0x%x\n", intnumber); break; } @@ -728,7 +728,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, busdevfn); + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; } else { @@ -754,7 +754,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (! dev) { - printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; retval = -1; @@ -788,14 +788,14 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } diff --git a/src/mainboard/via/epia-m700/acpi_tables.c b/src/mainboard/via/epia-m700/acpi_tables.c index 51c47149eb..ff32f9ae4c 100644 --- a/src/mainboard/via/epia-m700/acpi_tables.c +++ b/src/mainboard/via/epia-m700/acpi_tables.c @@ -135,7 +135,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT table. */ rsdp = (acpi_rsdp_t *) current; @@ -150,22 +150,22 @@ unsigned long write_acpi_tables(unsigned long start) acpi_write_rsdt(rsdt); /* We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); current = ALIGN(current, 64); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *) current; current += ((acpi_header_t *) AmlCode_dsdt)->length; memcpy((void *)dsdt, (void *)AmlCode_dsdt, ((acpi_header_t *) AmlCode_dsdt)->length); dsdt->checksum = 0; /* Don't trust iasl to get this right. */ dsdt->checksum = acpi_checksum(dsdt, dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -173,7 +173,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, fadt); /* If we want to use HPET timers Linux wants it in MADT. */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; @@ -181,24 +181,24 @@ unsigned long write_acpi_tables(unsigned long start) /* NO MCFG in VX855, no PCI-E. */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_mcfg_t *) current; acpi_create_hpet(hpet); current += hpet->header.length; acpi_add_table(rsdp, hpet); #if 0 - printk_debug("ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *) current; current += ((acpi_header_t *)AmlCode_ssdt)->length; memcpy((void *)ssdt,(void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length); ssdt->checksum = 0; /* Don't trust iasl to get this right. */ ssdt->checksum = acpi_checksum(ssdt, ssdt->length); acpi_add_table(rsdp, ssdt); - printk_debug("ACPI: * SSDT @ %08x Length %x\n", ssdt, ssdt->length); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %08x Length %x\n", ssdt, ssdt->length); #endif - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c index 5da2dfe9b7..fa4de9c4cc 100644 --- a/src/mainboard/via/epia-m700/romstage.c +++ b/src/mainboard/via/epia-m700/romstage.c @@ -729,7 +729,7 @@ void amd64_main(unsigned long bist) unsigned v_esp; __asm__ volatile ("movl %%esp, %0\n\t":"=a" (v_esp)); #if CONFIG_USE_INIT - printk_debug("v_esp=%08x\r\n", v_esp); + printk(BIOS_DEBUG, "v_esp=%08x\r\n", v_esp); #else print_debug("v_esp="); print_debug_hex32(v_esp); @@ -748,7 +748,7 @@ cpu_reset_x: cpu_reset = 0; #if CONFIG_USE_INIT - printk_debug("cpu_reset = %08x\r\n", cpu_reset); + printk(BIOS_DEBUG, "cpu_reset = %08x\r\n", cpu_reset); #else print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); @@ -798,7 +798,7 @@ cpu_reset_x: print_debug("Use Ram as Stack now - \r\n"); #if CONFIG_USE_INIT - printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); + printk(BIOS_DEBUG, "new_cpu_reset = %08x\r\n", new_cpu_reset); #else print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); diff --git a/src/mainboard/via/epia-m700/wakeup.c b/src/mainboard/via/epia-m700/wakeup.c index e64fb095d3..a586f0dfde 100644 --- a/src/mainboard/via/epia-m700/wakeup.c +++ b/src/mainboard/via/epia-m700/wakeup.c @@ -116,13 +116,13 @@ void acpi_jump_wake(u32 vector) u8 Data; struct Xgt_desc_struct *wake_thunk16_Xgt_desc; - printk_debug("IN ACPI JUMP WAKE TO %x\n", vector); + printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO %x\n", vector); if (enable_a20()) die("failed to enable A20\n"); - printk_debug("IN ACPI JUMP WAKE TO 3 %x\n", vector); + printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO 3 %x\n", vector); *((u16 *) (jump_to_wakeup + 3)) = (u16) (vector >> 4); - printk_debug("%x %x %x %x %x\n", jump_to_wakeup[0], jump_to_wakeup[1], + printk(BIOS_DEBUG, "%x %x %x %x %x\n", jump_to_wakeup[0], jump_to_wakeup[1], jump_to_wakeup[2], jump_to_wakeup[3], jump_to_wakeup[4]); memcpy((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100), @@ -131,7 +131,7 @@ void acpi_jump_wake(u32 vector) sizeof(jump_to_wakeup)); //jason_tsc_count(); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); //jason_tsc_count_end(); unsigned long long *real_mode_gdt_entries_at_eseg; diff --git a/src/mainboard/via/epia-n/acpi_tables.c b/src/mainboard/via/epia-n/acpi_tables.c index b7cdaeb636..3b1c0278bb 100644 --- a/src/mainboard/via/epia-n/acpi_tables.c +++ b/src/mainboard/via/epia-n/acpi_tables.c @@ -136,7 +136,7 @@ unsigned long write_acpi_tables(unsigned long start) start = ( start + 0x0f ) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -153,20 +153,20 @@ unsigned long write_acpi_tables(unsigned long start) /* * We explicitly add these tables later on: */ - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); current = ALIGN(current, 64); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); - printk_debug("ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *)current; current += ((acpi_header_t *)AmlCode)->length; memcpy((void *)dsdt,(void *)AmlCode, ((acpi_header_t *)AmlCode)->length); dsdt->checksum = 0; // don't trust intel iasl compiler to get this right dsdt->checksum = acpi_checksum(dsdt,dsdt->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -175,13 +175,13 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp,fadt); /* If we want IOAPIC Support Linux wants it in MADT. */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/via/epia-n/mptable.c b/src/mainboard/via/epia-n/mptable.c index e0d5f8f456..6c26836596 100644 --- a/src/mainboard/via/epia-n/mptable.c +++ b/src/mainboard/via/epia-n/mptable.c @@ -102,7 +102,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/via/pc2500e/mptable.c b/src/mainboard/via/pc2500e/mptable.c index 7f0ae85806..16b4b5334d 100644 --- a/src/mainboard/via/pc2500e/mptable.c +++ b/src/mainboard/via/pc2500e/mptable.c @@ -146,7 +146,7 @@ void *smp_write_config_table(void *v) mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/via/vt8454c/acpi_tables.c b/src/mainboard/via/vt8454c/acpi_tables.c index 24f7dd42a8..f5e37f5069 100644 --- a/src/mainboard/via/vt8454c/acpi_tables.c +++ b/src/mainboard/via/vt8454c/acpi_tables.c @@ -135,7 +135,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -153,7 +153,7 @@ unsigned long write_acpi_tables(unsigned long start) * We explicitly add these tables later on: */ - printk_debug("ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET\n"); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); @@ -161,20 +161,20 @@ unsigned long write_acpi_tables(unsigned long start) acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); - printk_debug("ACPI: * MCFG\n"); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; acpi_add_table(rsdp, mcfg); - printk_debug("ACPI: * FACS\n"); + printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); @@ -187,9 +187,9 @@ unsigned long write_acpi_tables(unsigned long start) dsdt->checksum = 0; // don't trust intel iasl compiler to get this right dsdt->checksum = acpi_checksum(dsdt, dsdt->length); #endif - printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); - printk_debug("ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); @@ -197,9 +197,9 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_fadt(fadt, facs, dsdt); acpi_add_table(rsdp, fadt); - printk_debug("ACPI: * DMI (Linux workaround)\n"); + printk(BIOS_DEBUG, "ACPI: * DMI (Linux workaround)\n"); memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE); - printk_info("ACPI: done.\n"); + printk(BIOS_INFO, "ACPI: done.\n"); return current; } diff --git a/src/mainboard/via/vt8454c/mptable.c b/src/mainboard/via/vt8454c/mptable.c index e060d67ddd..9abbaf420c 100644 --- a/src/mainboard/via/vt8454c/mptable.c +++ b/src/mainboard/via/vt8454c/mptable.c @@ -92,7 +92,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/winent/pl6064/mainboard.c b/src/mainboard/winent/pl6064/mainboard.c index 86dbbff03d..cd664f684e 100644 --- a/src/mainboard/winent/pl6064/mainboard.c +++ b/src/mainboard/winent/pl6064/mainboard.c @@ -23,8 +23,8 @@ static void init(struct device *dev) { - printk_debug("Win Enterprises PL-6064/65 ENTER %s\n", __func__); - printk_debug("Win Enterprises PL-6064/65 EXIT %s\n", __func__); + printk(BIOS_DEBUG, "Win Enterprises PL-6064/65 ENTER %s\n", __func__); + printk(BIOS_DEBUG, "Win Enterprises PL-6064/65 EXIT %s\n", __func__); } static void enable_dev(struct device *dev) diff --git a/src/northbridge/amd/amdfam10/amdfam10.h b/src/northbridge/amd/amdfam10/amdfam10.h index 826037194d..1fbef83236 100644 --- a/src/northbridge/amd/amdfam10/amdfam10.h +++ b/src/northbridge/amd/amdfam10/amdfam10.h @@ -1134,7 +1134,7 @@ static void wait_all_core0_mem_trained(struct sys_info *sysinfo) #ifdef __PRE_RAM__ print_debug("mem_trained["); print_debug_hex8(i); print_debug("]="); print_debug_hex8(sysinfo->mem_trained[i]); print_debug("\n"); #else - printk_debug("mem_trained[%02x]=%02x\n", i, sysinfo->mem_trained[i]); + printk(BIOS_DEBUG, "mem_trained[%02x]=%02x\n", i, sysinfo->mem_trained[i]); #endif switch(sysinfo->mem_trained[i]) { case 0: //don't need train @@ -1152,7 +1152,7 @@ static void wait_all_core0_mem_trained(struct sys_info *sysinfo) print_debug("mem trained failed\n"); soft_reset(); #else - printk_debug("mem trained failed\n"); + printk(BIOS_DEBUG, "mem trained failed\n"); hard_reset(); #endif } diff --git a/src/northbridge/amd/amdfam10/amdfam10_acpi.c b/src/northbridge/amd/amdfam10/amdfam10_acpi.c index 0d31c2eb02..0a35861556 100644 --- a/src/northbridge/amd/amdfam10/amdfam10_acpi.c +++ b/src/northbridge/amd/amdfam10/amdfam10_acpi.c @@ -60,7 +60,7 @@ unsigned long acpi_create_srat_lapics(unsigned long current) if (!cpu->enabled) { continue; } - printk_debug("SRAT: lapic cpu_index=%02x, node_id=%02x, apic_id=%02x\n", cpu_index, cpu->path.apic.node_id, cpu->path.apic.apic_id); + printk(BIOS_DEBUG, "SRAT: lapic cpu_index=%02x, node_id=%02x, apic_id=%02x\n", cpu_index, cpu->path.apic.node_id, cpu->path.apic.apic_id); current += acpi_create_srat_lapic((acpi_srat_lapic_t *)current, cpu->path.apic.node_id, cpu->path.apic.apic_id); cpu_index++; } @@ -89,7 +89,7 @@ static void set_srat_mem(void *gp, struct device *dev, struct resource *res) basek = resk(res->base); sizek = resk(res->size); - printk_debug("set_srat_mem: dev %s, res->index=%04x startk=%08x, sizek=%08x\n", + printk(BIOS_DEBUG, "set_srat_mem: dev %s, res->index=%04x startk=%08x, sizek=%08x\n", dev_path(dev), res->index, basek, sizek); /* * 0-640K must be on node 0 @@ -338,7 +338,7 @@ unsigned long acpi_add_ssdt_pstates(acpi_rsdp_t *rsdp, unsigned long current) if (!cpu->enabled) { continue; } - printk_debug("ACPI: pstate cpu_index=%02x, node_id=%02x, core_id=%02x\n", cpu_index, cpu->path.apic.node_id, cpu->path.apic.core_id); + printk(BIOS_DEBUG, "ACPI: pstate cpu_index=%02x, node_id=%02x, core_id=%02x\n", cpu_index, cpu->path.apic.node_id, cpu->path.apic.core_id); current = ( current + 0x0f) & -0x10; ssdt = (acpi_header_t *)current; diff --git a/src/northbridge/amd/amdfam10/amdfam10_conf.c b/src/northbridge/amd/amdfam10/amdfam10_conf.c index b52bedad7b..df578044a6 100644 --- a/src/northbridge/amd/amdfam10/amdfam10_conf.c +++ b/src/northbridge/amd/amdfam10/amdfam10_conf.c @@ -779,7 +779,7 @@ static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg, #if 0 // FIXME: can we use VGA reg instead? if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { - printk_spew("%s, enabling legacy VGA IO forwarding for %s link %s\n", + printk(BIOS_SPEW, "%s, enabling legacy VGA IO forwarding for %s link %s\n", __func__, dev_path(dev), link); tempreg |= PCI_IO_BASE_VGA_EN; } diff --git a/src/northbridge/amd/amdfam10/debug.c b/src/northbridge/amd/amdfam10/debug.c index 7fea9a0483..826b83ac0e 100644 --- a/src/northbridge/amd/amdfam10/debug.c +++ b/src/northbridge/amd/amdfam10/debug.c @@ -28,16 +28,16 @@ static void udelay_tsc(u32 us); static void print_debug_addr(const char *str, void *val) { #if CACHE_AS_RAM_ADDRESS_DEBUG == 1 - printk_debug("------Address debug: %s%x------\n", str, val); + printk(BIOS_DEBUG, "------Address debug: %s%x------\n", str, val); #endif } static void print_debug_pci_dev(u32 dev) { #if CONFIG_PCI_BUS_SEGN_BITS==0 - printk_debug("PCI: %02x:%02x.%02x", (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); + printk(BIOS_DEBUG, "PCI: %02x:%02x.%02x", (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); #else - printk_debug("PCI: %04x:%02x:%02x.%02x", (dev>>28) & 0x0f, (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); + printk(BIOS_DEBUG, "PCI: %04x:%02x:%02x.%02x", (dev>>28) & 0x0f, (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); #endif } @@ -55,7 +55,7 @@ static void print_pci_devices(void) continue; } print_debug_pci_dev(dev); - printk_debug(" %04x:%04x\n", (id & 0xffff), (id>>16)); + printk(BIOS_DEBUG, " %04x:%04x\n", (id & 0xffff), (id>>16)); if(((dev>>12) & 0x07) == 0) { u8 hdr_type; hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE); @@ -80,7 +80,7 @@ static void print_pci_devices_on_bus(u32 busn) continue; } print_debug_pci_dev(dev); - printk_debug(" %04x:%04x\n", (id & 0xffff), (id>>16)); + printk(BIOS_DEBUG, " %04x:%04x\n", (id & 0xffff), (id>>16)); if(((dev>>12) & 0x07) == 0) { u8 hdr_type; hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE); @@ -103,11 +103,11 @@ static void dump_pci_device_range(u32 dev, u32 start_reg, u32 size) for(i = start_reg; i < end; i+=4) { u32 val; if ((i & 0x0f) == 0) { - printk_debug("\n%04x:",i); + printk(BIOS_DEBUG, "\n%04x:",i); } val = pci_read_config32(dev, i); for(j=0;j<4;j++) { - printk_debug(" %02x", val & 0xff); + printk(BIOS_DEBUG, " %02x", val & 0xff); val >>= 8; } } @@ -129,10 +129,10 @@ static void dump_pci_device_index_wait_range(u32 dev, u32 index_reg, u32 start, for(i = start; i < end; i++) { u32 val; int j; - printk_debug("\n%02x:",i); + printk(BIOS_DEBUG, "\n%02x:",i); val = pci_read_config32_index_wait(dev, index_reg, i); for(j=0;j<4;j++) { - printk_debug(" %02x", val & 0xff); + printk(BIOS_DEBUG, " %02x", val & 0xff); val >>= 8; } @@ -160,10 +160,10 @@ static void dump_pci_device_index(u32 dev, u32 index_reg, u32 type, u32 length) for(i = 0; i < length; i++) { u32 val; if ((i & 0x0f) == 0) { - printk_debug("\n%02x:",i); + printk(BIOS_DEBUG, "\n%02x:",i); } val = pci_read_config32_index(dev, index_reg, i|type); - printk_debug(" %08x", val); + printk(BIOS_DEBUG, " %08x", val); } print_debug("\n"); } @@ -231,38 +231,38 @@ static void dump_spd_registers(const struct mem_controller *ctrl) device = ctrl->spd_addr[i]; if (device) { int j; - printk_debug("dimm: %02x.0: %02x", i, device); + printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device); for(j = 0; j < 128; j++) { int status; u8 byte; if ((j & 0xf) == 0) { - printk_debug("\n%02x: ", j); + printk(BIOS_DEBUG, "\n%02x: ", j); } status = smbus_read_byte(device, j); if (status < 0) { break; } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\n"); } device = ctrl->spd_addr[i+DIMM_SOCKETS]; if (device) { int j; - printk_debug("dimm: %02x.1: %02x", i, device); + printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device); for(j = 0; j < 128; j++) { int status; u8 byte; if ((j & 0xf) == 0) { - printk_debug("\n%02x: ", j); + printk(BIOS_DEBUG, "\n%02x: ", j); } status = smbus_read_byte(device, j); if (status < 0) { break; } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\n"); } @@ -275,7 +275,7 @@ static void dump_smbus_registers(void) for(device = 1; device < 0x80; device++) { int j; if( smbus_read_byte(device, 0) < 0 ) continue; - printk_debug("smbus: %02x", device); + printk(BIOS_DEBUG, "smbus: %02x", device); for(j = 0; j < 256; j++) { int status; u8 byte; @@ -284,10 +284,10 @@ static void dump_smbus_registers(void) break; } if ((j & 0xf) == 0) { - printk_debug("\n%02x: ",j); + printk(BIOS_DEBUG, "\n%02x: ",j); } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\n"); } @@ -298,14 +298,14 @@ static void dump_io_resources(u32 port) int i; udelay_tsc(2000); - printk_debug("%04x:\n", port); + printk(BIOS_DEBUG, "%04x:\n", port); for(i=0;i<256;i++) { u8 val; if ((i & 0x0f) == 0) { - printk_debug("%02x:", i); + printk(BIOS_DEBUG, "%02x:", i); } val = inb(port); - printk_debug(" %02x",val); + printk(BIOS_DEBUG, " %02x",val); if ((i & 0x0f) == 0x0f) { print_debug("\n"); } @@ -319,9 +319,9 @@ static void dump_mem(u32 start, u32 end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (u8)*((u8 *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } diff --git a/src/northbridge/amd/amdfam10/get_pci1234.c b/src/northbridge/amd/amdfam10/get_pci1234.c index f6a196aabf..fa2e56065d 100644 --- a/src/northbridge/amd/amdfam10/get_pci1234.c +++ b/src/northbridge/amd/amdfam10/get_pci1234.c @@ -75,12 +75,12 @@ void get_pci1234(void) //here we need to set hcdn //1. hypertransport.c need to record hcdn_reg together with 0xe0, 0xe4, 0xe8, 0xec when are set //2. so at the same time we need update hsdn with hcdn_reg here -// printk_debug("sysconf.ht_c_num = %02d\n", sysconf.ht_c_num); +// printk(BIOS_DEBUG, "sysconf.ht_c_num = %02d\n", sysconf.ht_c_num); for(j=0;j<sysconf.ht_c_num;j++) { u32 dwordx; dwordx = sysconf.ht_c_conf_bus[j]; -// printk_debug("sysconf.ht_c_conf_bus[%02d] = %08x\n", j, sysconf.ht_c_conf_bus[j]); +// printk(BIOS_DEBUG, "sysconf.ht_c_conf_bus[%02d] = %08x\n", j, sysconf.ht_c_conf_bus[j]); dwordx &=0xfffffffd; //keep bus num, node_id, link_num, enable bits if((dwordx & 0x7fd) == dword) { //SBLINK sysconf.pci1234[0] = dwordx; diff --git a/src/northbridge/amd/amdfam10/misc_control.c b/src/northbridge/amd/amdfam10/misc_control.c index c0650e72f0..472382c9a7 100644 --- a/src/northbridge/amd/amdfam10/misc_control.c +++ b/src/northbridge/amd/amdfam10/misc_control.c @@ -125,7 +125,7 @@ static void misc_control_init(struct device *dev) { u32 cmd; - printk_debug("NB: Function 3 Misc Control.. "); + printk(BIOS_DEBUG, "NB: Function 3 Misc Control.. "); /* Disable Machine checks from Invalid Locations. * This is needed for PC backwards compatibility. @@ -134,7 +134,7 @@ static void misc_control_init(struct device *dev) cmd |= (1<<6) | (1<<25); pci_write_config32(dev, 0x44, cmd ); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 4e1ccd6059..543d74cbfd 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -83,7 +83,7 @@ static void get_fx_devs(void) __f4_dev[i] = get_node_pci(i, 4); } if (!__f1_dev[0]) { - printk_err("Cannot find %02x:%02x.1", CONFIG_CBB, CONFIG_CDB); + printk(BIOS_ERR, "Cannot find %02x:%02x.1", CONFIG_CBB, CONFIG_CDB); die("Cannot go on\n"); } } @@ -568,7 +568,7 @@ static void amdfam10_create_vga_resource(device_t dev, unsigned nodeid) for (link = 0; link < dev->links; link++) { if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { #if CONFIG_CONSOLE_VGA_MULTI == 1 - printk_debug("VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n", vga_pri->bus->secondary, + printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n", vga_pri->bus->secondary, dev->link[link].secondary,dev->link[link].subordinate); /* We need to make sure the vga_pri is under the link */ if((vga_pri->bus->secondary >= dev->link[link].secondary ) && @@ -583,7 +583,7 @@ static void amdfam10_create_vga_resource(device_t dev, unsigned nodeid) if (link == dev->links) return; - printk_debug("VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link); + printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link); set_vga_enable_reg(nodeid, link); } @@ -906,9 +906,9 @@ static void pci_domain_set_resources(device_t dev) mem1 = find_resource(dev, 1|(link<<2)); mem2 = find_resource(dev, 2|(link<<2)); - printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", mem1->base, mem1->limit, mem1->size, mem1->align); - printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", mem2->base, mem2->limit, mem2->size, mem2->align); /* See if both resources have roughly the same limits */ @@ -934,9 +934,9 @@ static void pci_domain_set_resources(device_t dev) mem1->base = resource_max(mem1); } - printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", mem1->base, mem1->limit, mem1->size, mem1->align); - printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", mem2->base, mem2->limit, mem2->size, mem2->align); } @@ -1041,7 +1041,7 @@ static void pci_domain_set_resources(device_t dev) } -// printk_debug("node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); +// printk(BIOS_DEBUG, "node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); /* split the region to accomodate pci memory space */ if ( (basek < 4*1024*1024 ) && (limitk > mmio_basek) ) { @@ -1057,7 +1057,7 @@ static void pci_domain_set_resources(device_t dev) /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024; high_tables_size = HIGH_TABLES_SIZE * 1024; - printk_debug("(split)%xK table at =%08llx\n", HIGH_TABLES_SIZE, + printk(BIOS_DEBUG, "(split)%xK table at =%08llx\n", HIGH_TABLES_SIZE, high_tables_base); } #endif @@ -1086,7 +1086,7 @@ static void pci_domain_set_resources(device_t dev) ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; #if CONFIG_WRITE_HIGH_TABLES==1 - printk_debug("%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n", + printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); if (i==0 && high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ @@ -1144,7 +1144,7 @@ static u32 amdfam10_domain_scan_bus(device_t dev, u32 max) if (!dev->link[0].disable_relaxed_ordering) { httc |= HTTC_RSP_PASS_PW; } - printk_spew("%s passpw: %s\n", + printk(BIOS_SPEW, "%s passpw: %s\n", dev_path(dev), (!dev->link[0].disable_relaxed_ordering)? "enabled":"disabled"); @@ -1247,34 +1247,34 @@ static u32 cpu_bus_scan(device_t dev, u32 max) #if CONFIG_CBB dev_mc = dev_find_slot(0, PCI_DEVFN(CONFIG_CDB, 0)); //0x00 if(dev_mc && dev_mc->bus) { - printk_debug("%s found", dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s found", dev_path(dev_mc)); pci_domain = dev_mc->bus->dev; if(pci_domain && (pci_domain->path.type == DEVICE_PATH_PCI_DOMAIN)) { - printk_debug("\n%s move to ",dev_path(dev_mc)); + printk(BIOS_DEBUG, "\n%s move to ",dev_path(dev_mc)); dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff - printk_debug("%s",dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s",dev_path(dev_mc)); } else { - printk_debug(" but it is not under pci_domain directly "); + printk(BIOS_DEBUG, " but it is not under pci_domain directly "); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); if(!dev_mc) { dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0)); if (dev_mc && dev_mc->bus) { - printk_debug("%s found\n", dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s found\n", dev_path(dev_mc)); pci_domain = dev_mc->bus->dev; if(pci_domain && (pci_domain->path.type == DEVICE_PATH_PCI_DOMAIN)) { if((pci_domain->links==1) && (pci_domain->link[0].children == dev_mc)) { - printk_debug("%s move to ",dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s move to ",dev_path(dev_mc)); dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff - printk_debug("%s\n",dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s\n",dev_path(dev_mc)); while(dev_mc){ - printk_debug("%s move to ",dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s move to ",dev_path(dev_mc)); dev_mc->path.pci.devfn -= PCI_DEVFN(0x18,0); - printk_debug("%s\n",dev_path(dev_mc)); + printk(BIOS_DEBUG, "%s\n",dev_path(dev_mc)); dev_mc = dev_mc->sibling; } } @@ -1286,7 +1286,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); if (!dev_mc) { - printk_err("%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB); + printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB); die(""); } @@ -1301,7 +1301,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) pci_domain->link[1].link = 1; pci_domain->link[1].dev = pci_domain; pci_domain->link[1].children = 0; - printk_debug("%s links increase to %d\n", dev_path(pci_domain), pci_domain->links); + printk(BIOS_DEBUG, "%s links increase to %d\n", dev_path(pci_domain), pci_domain->links); } pci_domain->link[1].secondary = CONFIG_CBB - 1; } @@ -1355,7 +1355,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) dev->link[j].dev = dev; } dev->links = linknum; - printk_debug("%s links increase to %d\n", dev_path(dev), dev->links); + printk(BIOS_DEBUG, "%s links increase to %d\n", dev_path(dev), dev->links); } } @@ -1366,7 +1366,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) cores_found = (j >> 12) & 3; // dev is func 3 if (siblings > 3) cores_found |= (j >> 13) & 4; - printk_debug(" %s siblings=%d\n", dev_path(dev), cores_found); + printk(BIOS_DEBUG, " %s siblings=%d\n", dev_path(dev), cores_found); } u32 jj; @@ -1416,7 +1416,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) } } #endif - printk_debug("CPU: %s %s\n", + printk(BIOS_DEBUG, "CPU: %s %s\n", dev_path(cpu), cpu->enabled?"enabled":"disabled"); } diff --git a/src/northbridge/amd/amdfam10/raminit_amdmct.c b/src/northbridge/amd/amdfam10/raminit_amdmct.c index 21f1e188e5..4b33fd6f86 100644 --- a/src/northbridge/amd/amdfam10/raminit_amdmct.c +++ b/src/northbridge/amd/amdfam10/raminit_amdmct.c @@ -20,7 +20,7 @@ static void print_raminit(const char *strval, u32 val) { - printk_debug("%s%08x\n", strval, val); + printk(BIOS_DEBUG, "%s%08x\n", strval, val); } static void print_tx(const char *strval, u32 val) diff --git a/src/northbridge/amd/amdfam10/setup_resource_map.c b/src/northbridge/amd/amdfam10/setup_resource_map.c index b91c9222c1..0d6d743750 100644 --- a/src/northbridge/amd/amdfam10/setup_resource_map.c +++ b/src/northbridge/amd/amdfam10/setup_resource_map.c @@ -81,7 +81,7 @@ static void setup_resource_map_x_offset(const u32 *register_values, u32 max, #endif for(i = 0; i < max; i += 4) { #if RES_DEBUG - printk_debug("%04x: %02x %08x <- & %08x | %08x\n", + printk(BIOS_DEBUG, "%04x: %02x %08x <- & %08x | %08x\n", i/4, register_values[i], register_values[i+1] + ( (register_values[i]==RES_PCI_IO) ? offset_pci_dev : 0), register_values[i+2], @@ -146,7 +146,7 @@ static void setup_resource_map_x(const u32 *register_values, u32 max) #endif for(i = 0; i < max; i += 4) { #if RES_DEBUG - printk_debug("%04x: %02x %08x <- & %08x | %08x\n", + printk(BIOS_DEBUG, "%04x: %02x %08x <- & %08x | %08x\n", i/4, register_values[i],register_values[i+1], register_values[i+2], register_values[i+3]); #endif switch (register_values[i]) { diff --git a/src/northbridge/amd/amdht/comlib.c b/src/northbridge/amd/amdht/comlib.c index 249388b04a..4f735645f8 100644 --- a/src/northbridge/amd/amdht/comlib.c +++ b/src/northbridge/amd/amdht/comlib.c @@ -240,7 +240,7 @@ void CALLCONV AmdMSRWrite(uint32 Address, uint64 *Value) void ErrorStop(u32 value) { - printk_debug("Error: %08x ", value); + printk(BIOS_DEBUG, "Error: %08x ", value); } diff --git a/src/northbridge/amd/amdht/ht_wrapper.c b/src/northbridge/amd/amdht/ht_wrapper.c index 678ba6ce9a..a2b4076d22 100644 --- a/src/northbridge/amd/amdht/ht_wrapper.c +++ b/src/northbridge/amd/amdht/ht_wrapper.c @@ -84,13 +84,13 @@ void AMD_CB_EventNotify (u8 evtClass, u16 event, u8 *pEventData0) { u8 i; - printk_debug("AMD_CB_EventNotify()\n"); - printk_debug(" event class: %02x\n event: %04x\n data: ", evtClass, event); + printk(BIOS_DEBUG, "AMD_CB_EventNotify()\n"); + printk(BIOS_DEBUG, " event class: %02x\n event: %04x\n data: ", evtClass, event); for (i = 0; i < *pEventData0; i++) { - printk_debug(" %02x ", *(pEventData0 + i)); + printk(BIOS_DEBUG, " %02x ", *(pEventData0 + i)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } @@ -119,7 +119,7 @@ BOOL AMD_CB_ManualBUIDSwapList (u8 node, u16 link, u8 **List) static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; /* If the BUID was adjusted in early_ht we need to do the manual override */ if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk_debug("AMD_CB_ManualBUIDSwapList()\n"); + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); if ((node == 0) && (link == 0)) { /* BSP SB link */ *List = swaplist; return 1; @@ -170,9 +170,9 @@ void amd_ht_init(struct sys_info *sysinfo) AMD_CB_EventNotify // void (*AMD_CB_EventNotify) (); }; - printk_debug("Enter amd_ht_init()\n"); + printk(BIOS_DEBUG, "Enter amd_ht_init()\n"); amdHtInitialize(&ht_wrapper); - printk_debug("Exit amd_ht_init()\n"); + printk(BIOS_DEBUG, "Exit amd_ht_init()\n"); } diff --git a/src/northbridge/amd/amdk8/amdk8_acpi.c b/src/northbridge/amd/amdk8/amdk8_acpi.c index b5062bd092..1257f86633 100644 --- a/src/northbridge/amd/amdk8/amdk8_acpi.c +++ b/src/northbridge/amd/amdk8/amdk8_acpi.c @@ -81,7 +81,7 @@ unsigned long acpi_create_srat_lapics(unsigned long current) if (!cpu->enabled) { continue; } - printk_debug("SRAT: lapic cpu_index=%02x, node_id=%02x, apic_id=%02x\n", cpu_index, cpu->path.apic.node_id, cpu->path.apic.apic_id); + printk(BIOS_DEBUG, "SRAT: lapic cpu_index=%02x, node_id=%02x, apic_id=%02x\n", cpu_index, cpu->path.apic.node_id, cpu->path.apic.apic_id); current += acpi_create_srat_lapic((acpi_srat_lapic_t *)current, cpu->path.apic.node_id, cpu->path.apic.apic_id); cpu_index++; } @@ -110,7 +110,7 @@ static void set_srat_mem(void *gp, struct device *dev, struct resource *res) basek = resk(res->base); sizek = resk(res->size); - printk_debug("set_srat_mem: dev %s, res->index=%04lx startk=%08lx, sizek=%08lx\n", + printk(BIOS_DEBUG, "set_srat_mem: dev %s, res->index=%04lx startk=%08lx, sizek=%08lx\n", dev_path(dev), res->index, basek, sizek); /* * 0-640K must be on node 0 diff --git a/src/northbridge/amd/amdk8/amdk8_f.h b/src/northbridge/amd/amdk8/amdk8_f.h index 7010e80bd6..db2cf8a317 100644 --- a/src/northbridge/amd/amdk8/amdk8_f.h +++ b/src/northbridge/amd/amdk8/amdk8_f.h @@ -565,7 +565,7 @@ static void wait_all_core0_mem_trained(struct sys_info *sysinfo) #ifdef __PRE_RAM__ print_debug("mem_trained["); print_debug_hex8(i); print_debug("]="); print_debug_hex8(sysinfo->mem_trained[i]); print_debug("\r\n"); #else - printk_debug("mem_trained[%02x]=%02x\n", i, sysinfo->mem_trained[i]); + printk(BIOS_DEBUG, "mem_trained[%02x]=%02x\n", i, sysinfo->mem_trained[i]); #endif switch(sysinfo->mem_trained[i]) { case 0: //don't need train @@ -583,7 +583,7 @@ static void wait_all_core0_mem_trained(struct sys_info *sysinfo) print_debug("mem trained failed\r\n"); soft_reset(); #else - printk_debug("mem trained failed\n"); + printk(BIOS_DEBUG, "mem trained failed\n"); hard_reset(); #endif } diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 45b5a044f8..66876c2148 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -111,7 +111,7 @@ static inline void print_linkn (const char *strval, uint8_t byteval) { - printk_debug("%s%02x\r\n", strval, byteval); + printk(BIOS_DEBUG, "%s%02x\r\n", strval, byteval); } static void disable_probes(void) @@ -1496,7 +1496,7 @@ static unsigned setup_smp(void) nodes = setup_smp8(); #endif - printk_debug("%02x nodes initialized.\r\n", nodes); + printk(BIOS_DEBUG, "%02x nodes initialized.\r\n", nodes); return nodes; } diff --git a/src/northbridge/amd/amdk8/debug.c b/src/northbridge/amd/amdk8/debug.c index acfd602c6d..ff2f347af1 100644 --- a/src/northbridge/amd/amdk8/debug.c +++ b/src/northbridge/amd/amdk8/debug.c @@ -10,14 +10,14 @@ static inline void print_debug_addr(const char *str, void *val) { #if CACHE_AS_RAM_ADDRESS_DEBUG == 1 - printk_debug("------Address debug: %s%x------\n", str, val); + printk(BIOS_DEBUG, "------Address debug: %s%x------\n", str, val); #endif } #if 1 static void print_debug_pci_dev(unsigned dev) { - printk_debug("PCI: %02x:%02x.%02x", (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); + printk(BIOS_DEBUG, "PCI: %02x:%02x.%02x", (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); } static void print_pci_devices(void) @@ -34,7 +34,7 @@ static void print_pci_devices(void) continue; } print_debug_pci_dev(dev); - printk_debug(" %04x:%04x\n", (id & 0xffff), (id>>16)); + printk(BIOS_DEBUG, " %04x:%04x\n", (id & 0xffff), (id>>16)); if(((dev>>12) & 0x07) == 0) { uint8_t hdr_type; hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE); @@ -53,10 +53,10 @@ static void dump_pci_device(unsigned dev) for(i = 0; i < 256; i++) { unsigned char val; if ((i & 0x0f) == 0) { - printk_debug("\n%02x:",i); + printk(BIOS_DEBUG, "\n%02x:",i); } val = pci_read_config8(dev, i); - printk_debug(" %02x", val); + printk(BIOS_DEBUG, " %02x", val); } print_debug("\n"); } @@ -72,10 +72,10 @@ static void dump_pci_device_index_wait(unsigned dev, uint32_t index_reg) for(i = 0; i < 0x40; i++) { uint32_t val; int j; - printk_debug("\n%02x:",i); + printk(BIOS_DEBUG, "\n%02x:",i); val = pci_read_config32_index_wait(dev, index_reg, i); for(j=0;j<4;j++) { - printk_debug(" %02x", val & 0xff); + printk(BIOS_DEBUG, " %02x", val & 0xff); val >>= 8; } @@ -145,38 +145,38 @@ static void dump_spd_registers(const struct mem_controller *ctrl) device = ctrl->channel0[i]; if (device) { int j; - printk_debug("dimm: %02x.0: %02x", i, device); + printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device); for(j = 0; j < 128; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { - printk_debug("\n%02x: ", j); + printk(BIOS_DEBUG, "\n%02x: ", j); } status = smbus_read_byte(device, j); if (status < 0) { break; } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\n"); } device = ctrl->channel1[i]; if (device) { int j; - printk_debug("dimm: %02x.1: %02x", i, device); + printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device); for(j = 0; j < 128; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { - printk_debug("\n%02x: ", j); + printk(BIOS_DEBUG, "\n%02x: ", j); } status = smbus_read_byte(device, j); if (status < 0) { break; } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\n"); } @@ -189,7 +189,7 @@ static void dump_smbus_registers(void) for(device = 1; device < 0x80; device++) { int j; if( smbus_read_byte(device, 0) < 0 ) continue; - printk_debug("smbus: %02x", device); + printk(BIOS_DEBUG, "smbus: %02x", device); for(j = 0; j < 256; j++) { int status; unsigned char byte; @@ -198,10 +198,10 @@ static void dump_smbus_registers(void) break; } if ((j & 0xf) == 0) { - printk_debug("\n%02x: ",j); + printk(BIOS_DEBUG, "\n%02x: ",j); } byte = status & 0xff; - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } print_debug("\n"); } @@ -213,14 +213,14 @@ static void dump_io_resources(unsigned port) int i; udelay(2000); - printk_debug("%04x:\n", port); + printk(BIOS_DEBUG, "%04x:\n", port); for(i=0;i<256;i++) { uint8_t val; if ((i & 0x0f) == 0) { - printk_debug("%02x:", i); + printk(BIOS_DEBUG, "%02x:", i); } val = inb(port); - printk_debug(" %02x",val); + printk(BIOS_DEBUG, " %02x",val); if ((i & 0x0f) == 0x0f) { print_debug("\n"); } @@ -234,9 +234,9 @@ static void dump_mem(unsigned start, unsigned end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); } print_debug("\n"); } diff --git a/src/northbridge/amd/amdk8/exit_from_self.c b/src/northbridge/amd/amdk8/exit_from_self.c index 8b9a9d4fb4..cf8937aab7 100644 --- a/src/northbridge/amd/amdk8/exit_from_self.c +++ b/src/northbridge/amd/amdk8/exit_from_self.c @@ -43,7 +43,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); if (dcl & DCL_DimmEccEn) { u32 mnc; - printk_spew("ECC enabled\n"); + printk(BIOS_SPEW, "ECC enabled\n"); mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG); mnc |= MNC_ECC_EN; if (dcl & DCL_Width128) { @@ -52,7 +52,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, pci_write_config32(ctrl[i].f3, MCA_NB_CONFIG, mnc); } - printk_debug("before resume errata #%d\n", + printk(BIOS_DEBUG, "before resume errata #%d\n", (is_post_rev_g) ? 270 : 125); /* 1. Restore memory controller registers as normal. @@ -70,7 +70,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, enable_lapic(); init_timer(); - printk_debug("before exit errata - timer enabled\n"); + printk(BIOS_DEBUG, "before exit errata - timer enabled\n"); if (is_post_rev_g) { dcl = @@ -86,7 +86,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, udelay(800); - printk_debug("before exit errata - after mdelay\n"); + printk(BIOS_DEBUG, "before exit errata - after mdelay\n"); dcl = pci_read_config32(ctrl[i].f2, DRAM_INIT); dcl &= ~DI_EnDramInit; @@ -108,7 +108,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, pcidev = 0x80000000 | ((((ctrl[i].node_id + 0x18) << 3) | 0x2) << 8) | 0x90; - printk_debug("pcidev is %x\n", pcidev); + printk(BIOS_DEBUG, "pcidev is %x\n", pcidev); bitmask = 2; __asm__ __volatile__("pushl %0\n\t" "movw $0xcf8, %%dx\n\t" @@ -125,7 +125,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, "q"(bitmask):"edx"); } - printk_debug("after exit errata\n"); + printk(BIOS_DEBUG, "after exit errata\n"); for (i = 0; i < controllers; i++) { @@ -136,12 +136,12 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, if (sysinfo->meminfo[i].dimm_mask == 0x00) continue; - printk_debug("Exiting memory from self refresh: "); + printk(BIOS_DEBUG, "Exiting memory from self refresh: "); int loops = 0; do { loops++; if ((loops & 1023) == 0) { - printk_debug("."); + printk(BIOS_DEBUG, "."); } dcm = pci_read_config32(ctrl[i].f2, DRAM_CTRL_MISC); @@ -149,11 +149,11 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl, 0) /* || ((dcm & DCM_DramEnabled) == 0) */ ); if (loops >= TIMEOUT_LOOPS) { - printk_debug("timeout with with cntrl[%d]\n", i); + printk(BIOS_DEBUG, "timeout with with cntrl[%d]\n", i); continue; } - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } #if CONFIG_HW_MEM_HOLE_SIZEK != 0 diff --git a/src/northbridge/amd/amdk8/get_sblk_pci1234.c b/src/northbridge/amd/amdk8/get_sblk_pci1234.c index 737f33b48d..aa10f3f947 100644 --- a/src/northbridge/amd/amdk8/get_sblk_pci1234.c +++ b/src/northbridge/amd/amdk8/get_sblk_pci1234.c @@ -55,7 +55,7 @@ unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index 4dc302b49d..2e68618100 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -26,7 +26,7 @@ static inline void print_linkn_in (const char *strval, uint8_t byteval) { - printk_debug("%s%02x\r\n", strval, byteval); + printk(BIOS_DEBUG, "%s%02x\r\n", strval, byteval); } static uint8_t ht_lookup_capability(device_t dev, uint16_t val) @@ -127,7 +127,7 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos) uint32_t id; freq_cap = pci_read_config16(dev, pos); - printk_spew("pos=0x%x, unfiltered freq_cap=0x%x\r\n", pos, freq_cap); + printk(BIOS_SPEW, "pos=0x%x, unfiltered freq_cap=0x%x\r\n", pos, freq_cap); freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */ id = pci_read_config32(dev, 0); @@ -157,8 +157,8 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos) #endif } - printk_spew("pos=0x%x, filtered freq_cap=0x%x\r\n", pos, freq_cap); - //printk_spew("capping to 800/600/400/200 MHz\r\n"); + printk(BIOS_SPEW, "pos=0x%x, filtered freq_cap=0x%x\r\n", pos, freq_cap); + //printk(BIOS_SPEW, "capping to 800/600/400/200 MHz\r\n"); //freq_cap &= 0x3f; return freq_cap; } @@ -220,14 +220,14 @@ static int ht_optimize_link( int needs_reset; /* Set link width and frequency */ - printk_spew("entering ht_optimize_link\r\n"); + printk(BIOS_SPEW, "entering ht_optimize_link\r\n"); /* Initially assume everything is already optimized and I don't need a reset */ needs_reset = 0; /* Get the frequency capabilities */ freq_cap1 = ht_read_freq_cap(dev1, pos1 + LINK_FREQ_CAP(offs1)); freq_cap2 = ht_read_freq_cap(dev2, pos2 + LINK_FREQ_CAP(offs2)); - printk_spew("freq_cap1=0x%x, freq_cap2=0x%x\r\n", freq_cap1, freq_cap2); + printk(BIOS_SPEW, "freq_cap1=0x%x, freq_cap2=0x%x\r\n", freq_cap1, freq_cap2); /* Calculate the highest possible frequency */ freq = log2(freq_cap1 & freq_cap2); @@ -236,11 +236,11 @@ static int ht_optimize_link( old_freq = pci_read_config8(dev1, pos1 + LINK_FREQ(offs1)); old_freq &= 0x0f; needs_reset |= old_freq != freq; - printk_spew("dev1 old_freq=0x%x, freq=0x%x, needs_reset=0x%0x\r\n", old_freq, freq, needs_reset); + printk(BIOS_SPEW, "dev1 old_freq=0x%x, freq=0x%x, needs_reset=0x%0x\r\n", old_freq, freq, needs_reset); old_freq = pci_read_config8(dev2, pos2 + LINK_FREQ(offs2)); old_freq &= 0x0f; needs_reset |= old_freq != freq; - printk_spew("dev2 old_freq=0x%x, freq=0x%x, needs_reset=0x%0x\r\n", old_freq, freq, needs_reset); + printk(BIOS_SPEW, "dev2 old_freq=0x%x, freq=0x%x, needs_reset=0x%0x\r\n", old_freq, freq, needs_reset); /* Set the Calculated link frequency */ pci_write_config8(dev1, pos1 + LINK_FREQ(offs1), freq); @@ -249,45 +249,45 @@ static int ht_optimize_link( /* Get the width capabilities */ width_cap1 = ht_read_width_cap(dev1, pos1 + LINK_WIDTH(offs1)); width_cap2 = ht_read_width_cap(dev2, pos2 + LINK_WIDTH(offs2)); - printk_spew("width_cap1=0x%x, width_cap2=0x%x\r\n", width_cap1, width_cap2); + printk(BIOS_SPEW, "width_cap1=0x%x, width_cap2=0x%x\r\n", width_cap1, width_cap2); /* Calculate dev1's input width */ ln_width1 = link_width_to_pow2[width_cap1 & 7]; ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7]; - printk_spew("dev1 input ln_width1=0x%x, ln_width2=0x%x\r\n", ln_width1, ln_width2); + printk(BIOS_SPEW, "dev1 input ln_width1=0x%x, ln_width2=0x%x\r\n", ln_width1, ln_width2); if (ln_width1 > ln_width2) { ln_width1 = ln_width2; } width = pow2_to_link_width[ln_width1]; - printk_spew("dev1 input width=0x%x\r\n", width); + printk(BIOS_SPEW, "dev1 input width=0x%x\r\n", width); /* Calculate dev1's output width */ ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7]; ln_width2 = link_width_to_pow2[width_cap2 & 7]; - printk_spew("dev1 output ln_width1=0x%x, ln_width2=0x%x\r\n", ln_width1, ln_width2); + printk(BIOS_SPEW, "dev1 output ln_width1=0x%x, ln_width2=0x%x\r\n", ln_width1, ln_width2); if (ln_width1 > ln_width2) { ln_width1 = ln_width2; } width |= pow2_to_link_width[ln_width1] << 4; - printk_spew("dev1 input|output width=0x%x\r\n", width); + printk(BIOS_SPEW, "dev1 input|output width=0x%x\r\n", width); /* See if I am changing dev1's width */ old_width = pci_read_config8(dev1, pos1 + LINK_WIDTH(offs1) + 1); old_width &= 0x77; needs_reset |= old_width != width; - printk_spew("old dev1 input|output width=0x%x\r\n", width); + printk(BIOS_SPEW, "old dev1 input|output width=0x%x\r\n", width); /* Set dev1's widths */ pci_write_config8(dev1, pos1 + LINK_WIDTH(offs1) + 1, width); /* Calculate dev2's width */ width = ((width & 0x70) >> 4) | ((width & 0x7) << 4); - printk_spew("dev2 input|output width=0x%x\r\n", width); + printk(BIOS_SPEW, "dev2 input|output width=0x%x\r\n", width); /* See if I am changing dev2's width */ old_width = pci_read_config8(dev2, pos2 + LINK_WIDTH(offs2) + 1); old_width &= 0x77; needs_reset |= old_width != width; - printk_spew("old dev2 input|output width=0x%x\r\n", width); + printk(BIOS_SPEW, "old dev2 input|output width=0x%x\r\n", width); /* Set dev2's widths */ pci_write_config8(dev2, pos2 + LINK_WIDTH(offs2) + 1, width); @@ -852,16 +852,16 @@ static int optimize_link_incoherent_ht(struct sys_info *sysinfo) unsigned link_pair_num = sysinfo->link_pair_num; - printk_spew("entering optimize_link_incoherent_ht\r\n"); - printk_spew("sysinfo->link_pair_num=0x%x\r\n", link_pair_num); + printk(BIOS_SPEW, "entering optimize_link_incoherent_ht\r\n"); + printk(BIOS_SPEW, "sysinfo->link_pair_num=0x%x\r\n", link_pair_num); for(i=0; i< link_pair_num; i++) { struct link_pair_st *link_pair= &sysinfo->link_pair[i]; reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs); - printk_spew("after ht_optimize_link for link pair %d, reset_needed=0x%x\r\n", i, reset_needed); + printk(BIOS_SPEW, "after ht_optimize_link for link pair %d, reset_needed=0x%x\r\n", i, reset_needed); } reset_needed |= optimize_link_read_pointers_chain(sysinfo->ht_c_num); - printk_spew("after optimize_link_read_pointers_chain, reset_needed=0x%x\r\n", reset_needed); + printk(BIOS_SPEW, "after optimize_link_read_pointers_chain, reset_needed=0x%x\r\n", reset_needed); return reset_needed; diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c index a1e88aa837..1b40eb1381 100644 --- a/src/northbridge/amd/amdk8/misc_control.c +++ b/src/northbridge/amd/amdk8/misc_control.c @@ -112,7 +112,7 @@ static void misc_control_init(struct device *dev) int needs_reset; struct device *f0_dev, *f2_dev; - printk_debug("NB: Function 3 Misc Control.. "); + printk(BIOS_DEBUG, "NB: Function 3 Misc Control.. "); needs_reset = 0; /* Disable Machine checks from Invalid Locations. @@ -205,13 +205,13 @@ static void misc_control_init(struct device *dev) } } else { - printk_err("Missing f0 device!\n"); + printk(BIOS_ERR, "Missing f0 device!\n"); } if (needs_reset) { - printk_debug("resetting cpu\n"); + printk(BIOS_DEBUG, "resetting cpu\n"); hard_reset(); } - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 1dd71de10e..2ca14444cb 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -395,14 +395,14 @@ static void amdk8_set_resource(device_t dev, struct resource *resource, unsigned /* Make certain the resource has actually been set */ if (!(resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("%s: can't set unassigned resource @%lx %lx\n", + printk(BIOS_ERR, "%s: can't set unassigned resource @%lx %lx\n", __func__, resource->index, resource->flags); return; } /* If I have already stored this resource don't worry about it */ if (resource->flags & IORESOURCE_STORED) { - printk_err("%s: can't set stored resource @%lx %lx\n", __func__, + printk(BIOS_ERR, "%s: can't set stored resource @%lx %lx\n", __func__, resource->index, resource->flags); return; } @@ -442,7 +442,7 @@ static void amdk8_set_resource(device_t dev, struct resource *resource, unsigned limit |= (nodeid & 7); if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { - printk_spew("%s, enabling legacy VGA IO forwarding for %s link 0x%x\n", + printk(BIOS_SPEW, "%s, enabling legacy VGA IO forwarding for %s link 0x%x\n", __func__, dev_path(dev), link); base |= PCI_IO_BASE_VGA_EN; } @@ -487,7 +487,7 @@ static void amdk8_create_vga_resource(device_t dev, unsigned nodeid) for (link = 0; link < dev->links; link++) { if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { #if CONFIG_CONSOLE_VGA_MULTI == 1 - printk_debug("VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n", vga_pri->bus->secondary, + printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n", vga_pri->bus->secondary, dev->link[link].secondary,dev->link[link].subordinate); /* We need to make sure the vga_pri is under the link */ if((vga_pri->bus->secondary >= dev->link[link].secondary ) && @@ -502,12 +502,12 @@ static void amdk8_create_vga_resource(device_t dev, unsigned nodeid) if (link == dev->links) return; - printk_debug("VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link); + printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link); /* allocate a temp resource for the legacy VGA buffer */ resource = new_resource(dev, IOINDEX(4, link)); if(!resource){ - printk_debug("VGA: %s out of resources.\n", dev_path(dev)); + printk(BIOS_DEBUG, "VGA: %s out of resources.\n", dev_path(dev)); return; } resource->base = 0xa0000; @@ -573,10 +573,10 @@ static void amdk8_enable_resources(device_t dev) static void mcf0_control_init(struct device *dev) { #if 0 - printk_debug("NB: Function 0 Misc Control.. "); + printk(BIOS_DEBUG, "NB: Function 0 Misc Control.. "); #endif #if 0 - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } @@ -773,7 +773,7 @@ static void disable_hoist_memory(unsigned long hole_startk, int node_id) f1_write_config32(0x44 + (node_id << 3),limit - (hole_sizek << 2)); dev = __f1_dev[node_id]; if (dev == NULL) { - printk_err("%s: node %x is NULL!\n", __func__, node_id); + printk(BIOS_ERR, "%s: node %x is NULL!\n", __func__, node_id); return; } hoist = pci_read_config32(dev, 0xf0); @@ -869,9 +869,9 @@ static void amdk8_domain_set_resources(device_t dev) mem2 = find_resource(dev, 2); #if 1 - printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", mem1->base, mem1->limit, mem1->size, mem1->align); - printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", mem2->base, mem2->limit, mem2->size, mem2->align); #endif @@ -899,9 +899,9 @@ static void amdk8_domain_set_resources(device_t dev) } #if 1 - printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", mem1->base, mem1->limit, mem1->size, mem1->align); - printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", + printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", mem2->base, mem2->limit, mem2->size, mem2->align); #endif @@ -1005,11 +1005,11 @@ static void amdk8_domain_set_resources(device_t dev) #if CONFIG_GFXUMA == 1 - printk_debug("node %d : uma_memory_base/1024=0x%08x, mmio_basek=0x%08x, basek=0x%08x, limitk=0x%08x\n", i, uma_memory_base >> 10, mmio_basek, basek, limitk); + printk(BIOS_DEBUG, "node %d : uma_memory_base/1024=0x%08x, mmio_basek=0x%08x, basek=0x%08x, limitk=0x%08x\n", i, uma_memory_base >> 10, mmio_basek, basek, limitk); if ((uma_memory_base >> 10) < mmio_basek) - printk_alert("node %d: UMA memory starts below mmio_basek\n", i); + printk(BIOS_ALERT, "node %d: UMA memory starts below mmio_basek\n", i); #else -// printk_debug("node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); //yhlu +// printk(BIOS_DEBUG, "node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); //yhlu #endif /* See if I need to split the region to accomodate pci memory space */ @@ -1030,7 +1030,7 @@ static void amdk8_domain_set_resources(device_t dev) high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024; #endif high_tables_size = HIGH_TABLES_SIZE * 1024; - printk_debug(" split: %dK table at =%08llx\n", HIGH_TABLES_SIZE, + printk(BIOS_DEBUG, " split: %dK table at =%08llx\n", HIGH_TABLES_SIZE, high_tables_base); } #endif @@ -1060,7 +1060,7 @@ static void amdk8_domain_set_resources(device_t dev) ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; #if CONFIG_WRITE_HIGH_TABLES==1 - printk_debug("%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n", + printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); if (i==0 && high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ @@ -1101,7 +1101,7 @@ static unsigned int amdk8_domain_scan_bus(device_t dev, unsigned int max) if (!dev->link[0].disable_relaxed_ordering) { httc |= HTTC_RSP_PASS_PW; } - printk_spew("%s passpw: %s\n", + printk(BIOS_SPEW, "%s passpw: %s\n", dev_path(dev), (!dev->link[0].disable_relaxed_ordering)? "enabled":"disabled"); @@ -1207,7 +1207,7 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max) if (cpu_dev && cpu_dev->enabled) { j = pci_read_config32(cpu_dev, 0xe8); j = (j >> 12) & 3; // dev is func 3 - printk_debug(" %s siblings=%d\n", dev_path(cpu_dev), j); + printk(BIOS_DEBUG, " %s siblings=%d\n", dev_path(cpu_dev), j); if(nb_cfg_54) { // For e0 single core if nb_cfg_54 is set, apicid will be 0, 2, 4.... @@ -1224,7 +1224,7 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max) e0_later_single_core = 0; } if(e0_later_single_core) { - printk_debug("\tFound Rev E or Rev F later single core\r\n"); + printk(BIOS_DEBUG, "\tFound Rev E or Rev F later single core\r\n"); j=1; } @@ -1287,7 +1287,7 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max) cpu->path.apic.apic_id += sysconf.apicid_offset; } } - printk_debug("CPU: %s %s\n", + printk(BIOS_DEBUG, "CPU: %s %s\n", dev_path(cpu), cpu->enabled?"enabled":"disabled"); } diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index 0e27a16991..b02e9a0058 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -25,7 +25,7 @@ static void hard_reset(void); static void setup_resource_map(const unsigned int *register_values, int max) { int i; -// printk_debug("setting up resource map...."); +// printk(BIOS_DEBUG, "setting up resource map...."); for (i = 0; i < max; i += 3) { device_t dev; unsigned where; @@ -37,7 +37,7 @@ static void setup_resource_map(const unsigned int *register_values, int max) reg |= register_values[i+2]; pci_write_config32(dev, where, reg); } -// printk_debug("done.\n"); +// printk(BIOS_DEBUG, "done.\n"); } static int controller_present(const struct mem_controller *ctrl) @@ -524,10 +524,10 @@ static void sdram_set_registers(const struct mem_controller *ctrl) int max; if (!controller_present(ctrl)) { -// printk_debug("No memory controller present\n"); +// printk(BIOS_DEBUG, "No memory controller present\n"); return; } - printk_spew("setting up CPU%02x northbridge registers\n", ctrl->node_id); + printk(BIOS_SPEW, "setting up CPU%02x northbridge registers\n", ctrl->node_id); max = ARRAY_SIZE(register_values); for (i = 0; i < max; i += 3) { device_t dev; @@ -540,7 +540,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl) reg |= register_values[i+2]; pci_write_config32(dev, where, reg); } - printk_spew("done.\n"); + printk(BIOS_SPEW, "done.\n"); } static void hw_enable_ecc(const struct mem_controller *ctrl) @@ -849,17 +849,17 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk) } /* Report the amount of memory. */ - printk_debug("RAM end at 0x%08x kB\n", tom_k); + printk(BIOS_DEBUG, "RAM end at 0x%08x kB\n", tom_k); /* Now set top of memory */ msr_t msr; if (tom_k > (4*1024*1024)) { - printk_spew("Handling memory mapped above 4 GB\n"); - printk_spew("Upper RAM end at 0x%08x kB\n", tom_k); + printk(BIOS_SPEW, "Handling memory mapped above 4 GB\n"); + printk(BIOS_SPEW, "Upper RAM end at 0x%08x kB\n", tom_k); msr.lo = (tom_k & 0x003fffff) << 10; msr.hi = (tom_k & 0xffc00000) >> 22; wrmsr(TOP_MEM2, msr); - printk_spew("Correcting memory amount mapped below 4 GB\n"); + printk(BIOS_SPEW, "Correcting memory amount mapped below 4 GB\n"); } /* Leave a 64M hole between TOP_MEM and TOP_MEM2 @@ -872,9 +872,9 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk) } else #endif tom_k = 0x3f0000; - printk_spew("Adjusting lower RAM end\n"); + printk(BIOS_SPEW, "Adjusting lower RAM end\n"); } - printk_spew("Lower RAM end at 0x%08x kB\n", tom_k); + printk(BIOS_SPEW, "Lower RAM end at 0x%08x kB\n", tom_k); msr.lo = (tom_k & 0x003fffff) << 10; msr.hi = (tom_k & 0xffc00000) >> 22; wrmsr(TOP_MEM, msr); @@ -969,7 +969,7 @@ static unsigned long interleave_chip_selects(const struct mem_controller *ctrl) if (is_dual_channel(ctrl)) { /* Also we run out of address mask bits if we try and interleave 8 4GB dimms */ if ((bits == 3) && (common_size == (1 << (32 - 3)))) { -// printk_debug("8 4GB chip selects cannot be interleaved\n"); +// printk(BIOS_DEBUG, "8 4GB chip selects cannot be interleaved\n"); return 0; } csbase_inc <<=1; @@ -979,7 +979,7 @@ static unsigned long interleave_chip_selects(const struct mem_controller *ctrl) csbase_inc = 1 << csbase_low_d0_shift[common_cs_mode]; if (is_dual_channel(ctrl)) { if ( (bits==3) && (common_cs_mode > 8)) { -// printk_debug("8 cs_mode>8 chip selects cannot be interleaved\n"); +// printk(BIOS_DEBUG, "8 cs_mode>8 chip selects cannot be interleaved\n"); return 0; } csbase_inc <<=1; @@ -1006,7 +1006,7 @@ static unsigned long interleave_chip_selects(const struct mem_controller *ctrl) csbase += csbase_inc; } - printk_spew("Interleaved\n"); + printk(BIOS_SPEW, "Interleaved\n"); /* Return the memory size in K */ return common_size << (15 + bits); @@ -1107,7 +1107,7 @@ static void order_dimms(const struct mem_controller *ctrl) read_option(CMOS_VSTART_interleave_chip_selects, CMOS_VLEN_interleave_chip_selects, 1) != 0) { tom_k = interleave_chip_selects(ctrl); } else { - printk_debug("Interleaving disabled\n"); + printk(BIOS_DEBUG, "Interleaving disabled\n"); tom_k = 0; } @@ -1124,7 +1124,7 @@ static void order_dimms(const struct mem_controller *ctrl) static long disable_dimm(const struct mem_controller *ctrl, unsigned index, long dimm_mask) { - printk_debug("disabling dimm %02x\n", index); + printk(BIOS_DEBUG, "disabling dimm %02x\n", index); pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0); pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0); dimm_mask &= ~(1 << index); @@ -1183,9 +1183,9 @@ static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); if (is_registered(ctrl)) { - printk_spew("Registered\n"); + printk(BIOS_SPEW, "Registered\n"); } else { - printk_spew("Unbuffered\n"); + printk(BIOS_SPEW, "Unbuffered\n"); } return dimm_mask; @@ -1280,7 +1280,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, long dimm_ma } } } - printk_spew("Enabling dual channel memory\n"); + printk(BIOS_SPEW, "Enabling dual channel memory\n"); uint32_t dcl; dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); dcl &= ~DCL_32ByteEn; @@ -1378,7 +1378,7 @@ static const struct mem_param *get_mem_param(unsigned min_cycle_time) if (!param->cycle_time) { die("min_cycle_time to low"); } - printk_spew("%s\n", param->name); + printk(BIOS_SPEW, "%s\n", param->name); return param; } @@ -2073,7 +2073,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) long dimm_mask; #if 1 if (!controller_present(ctrl)) { -// printk_debug("No memory controller present\n"); +// printk(BIOS_DEBUG, "No memory controller present\n"); return; } #endif @@ -2081,7 +2081,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) activate_spd_rom(ctrl); dimm_mask = spd_detect_dimms(ctrl); if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { - printk_debug("No memory for this cpu\n"); + printk(BIOS_DEBUG, "No memory for this cpu\n"); return; } dimm_mask = spd_enable_2channels(ctrl, dimm_mask); @@ -2105,7 +2105,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) return; hw_spd_err: /* Unrecoverable error reading SPD data */ - printk_err("SPD error - reset\n"); + printk(BIOS_ERR, "SPD error - reset\n"); hard_reset(); return; } @@ -2171,7 +2171,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK; - printk_spew("Handling memory hole at 0x%08x (default)\n", hole_startk); + printk(BIOS_SPEW, "Handling memory hole at 0x%08x (default)\n", hole_startk); #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 /* We need to double check if hole_startk is valid. * If it is equal to the dram base address in K (base_k), @@ -2196,7 +2196,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) basek_pri = base_k; } - printk_spew("Handling memory hole at 0x%08x (adjusted)\n", hole_startk); + printk(BIOS_SPEW, "Handling memory hole at 0x%08x (adjusted)\n", hole_startk); #endif /* Find node number that needs the memory hole configured */ for (i=0; i<controllers; i++) { @@ -2273,7 +2273,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); if (dcl & DCL_DimmEccEn) { uint32_t mnc; - printk_spew("ECC enabled\n"); + printk(BIOS_SPEW, "ECC enabled\n"); mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG); mnc |= MNC_ECC_EN; if (dcl & DCL_128BitEn) { @@ -2301,17 +2301,17 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) continue; } - printk_debug("Initializing memory: "); + printk(BIOS_DEBUG, "Initializing memory: "); int loops = 0; do { dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); loops++; if ((loops & 1023) == 0) { - printk_debug("."); + printk(BIOS_DEBUG, "."); } } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS)); if (loops >= TIMEOUT_LOOPS) { - printk_debug(" failed\n"); + printk(BIOS_DEBUG, " failed\n"); continue; } @@ -2324,7 +2324,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) } while(((dcl & DCL_MemClrStatus) == 0) || ((dcl & DCL_DramEnable) == 0) ); } - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } #if CONFIG_HW_MEM_HOLE_SIZEK != 0 diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c index 601c035dd8..c38d1595ae 100644 --- a/src/northbridge/amd/amdk8/raminit_f.c +++ b/src/northbridge/amd/amdk8/raminit_f.c @@ -34,7 +34,7 @@ #endif #if DEBUG_RAM_SETUP -#define printk_raminit printk_debug +#define printk_raminit(fmt, arg...) printk(BIOS_DEBUG, fmt, arg) #else #define printk_raminit(fmt, arg...) #endif @@ -691,7 +691,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in } sysinfo->ctrl_present[ctrl->node_id] = 1; - printk_spew("setting up CPU %02x northbridge registers\n", ctrl->node_id); + printk(BIOS_SPEW, "setting up CPU %02x northbridge registers\n", ctrl->node_id); max = ARRAY_SIZE(register_values); for (i = 0; i < max; i += 3) { device_t dev; @@ -704,7 +704,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in reg |= register_values[i+2]; pci_write_config32(dev, where, reg); } - printk_spew("done.\n"); + printk(BIOS_SPEW, "done.\n"); } static int is_dual_channel(const struct mem_controller *ctrl) @@ -801,7 +801,7 @@ static void spd_get_dimm_size(unsigned device, struct dimm_size *sz) if (value <=4 ) value += 8; // add back to 1G to high value += (27-5); // make 128MB to the real lines if ( value != (sz->per_rank)) { - printk_err("Bad RANK Size --\n"); + printk(BIOS_ERR, "Bad RANK Size --\n"); goto val_err; } @@ -1041,7 +1041,7 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk) } /* Report the amount of memory. */ - printk_debug("RAM end at 0x%08x kB\n", tom_k); + printk(BIOS_DEBUG, "RAM end at 0x%08x kB\n", tom_k); /* Now set top of memory */ msr_t msr; @@ -1175,7 +1175,7 @@ static unsigned long interleave_chip_selects(const struct mem_controller *ctrl, csbase += csbase_inc; } - printk_debug("Interleaved\n"); + printk(BIOS_DEBUG, "Interleaved\n"); /* Return the memory size in K */ return common_size << ((27-10) + bits); @@ -1279,7 +1279,7 @@ static void order_dimms(const struct mem_controller *ctrl, CMOS_VLEN_interleave_chip_selects, 1) != 0) { tom_k = interleave_chip_selects(ctrl, meminfo->is_Width128); } else { - printk_debug("Interleaving disabled\n"); + printk(BIOS_DEBUG, "Interleaving disabled\n"); tom_k = 0; } @@ -1297,7 +1297,7 @@ static void order_dimms(const struct mem_controller *ctrl, static long disable_dimm(const struct mem_controller *ctrl, unsigned index, struct mem_info *meminfo) { - printk_debug("disabling dimm %02x\n", index); + printk(BIOS_DEBUG, "disabling dimm %02x\n", index); if (!(meminfo->dimm_mask & 0x0F) && (meminfo->dimm_mask & 0xF0)) { /* channelB only? */ pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 4) << 2), 0); pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 5) << 2), 0); @@ -1370,9 +1370,9 @@ static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); if (meminfo->is_registered) { - printk_spew("Registered\n"); + printk(BIOS_SPEW, "Registered\n"); } else { - printk_spew("Unbuffered\n"); + printk(BIOS_SPEW, "Unbuffered\n"); } return meminfo->dimm_mask; } @@ -1473,7 +1473,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_i /* Abort if the chips don't support a common CAS latency. */ common_cl = spd_read_byte(device0, 18) & spd_read_byte(device1, 18); if (!common_cl) { - printk_debug("No common CAS latency supported\n"); + printk(BIOS_DEBUG, "No common CAS latency supported\n"); goto single_channel; } else { printk_raminit("Common CAS latency bitfield: 0x%02x\n", common_cl); @@ -1495,7 +1495,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_i } } } - printk_spew("Enabling dual channel memory\n"); + printk(BIOS_SPEW, "Enabling dual channel memory\n"); dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); dcl &= ~DCL_BurstLength32; /* 32byte mode may be preferred in platforms that include graphics controllers that generate a lot of 32-bytes system memory accesses 32byte mode is not supported when the DRAM interface is 128 bits wides, even 32byte mode is set, system still use 64 byte mode */ @@ -1514,7 +1514,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_i if (((meminfo->dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) { /* mux capable and single dimm in channelB */ if (mux_cap) { - printk_spew("Enable 64MuxMode & BurstLength32\n"); + printk(BIOS_SPEW, "Enable 64MuxMode & BurstLength32\n"); dcm = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC); dcm |= DCM_Mode64BitMux; pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dcm); @@ -1529,7 +1529,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_i } else { /* unmatched dual dimms ? */ /* unmatched dual dimms not supported by meminit code. Use single channelA dimm. */ meminfo->dimm_mask &= ~((1 << (DIMM_SOCKETS * 2)) - (1 << DIMM_SOCKETS)); - printk_spew("Unmatched dual dimms. Use single channelA dimm.\n"); + printk(BIOS_SPEW, "Unmatched dual dimms. Use single channelA dimm.\n"); } return meminfo->dimm_mask; } @@ -1610,7 +1610,7 @@ static const struct mem_param *get_mem_param(unsigned min_cycle_time) if (!param->cycle_time) { die("min_cycle_time to low"); } - printk_spew("%s\n", param->name); + printk(BIOS_SPEW, "%s\n", param->name); return param; } @@ -1912,7 +1912,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller * value |= result.param->dch_memclk << DCH_MemClkFreq_SHIFT; pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value); - printk_debug("%s\n", result.param->name); + printk(BIOS_DEBUG, "%s\n", result.param->name); /* Update DRAM Timing Low with our selected cas latency */ value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); @@ -1960,7 +1960,7 @@ int get_dimm_Trc_clocks(u32 spd_device, const struct mem_param *param) if (clocks < DTL_TRC_MIN) { #warning We should die here or at least disable this bank. - printk_notice("update_dimm_Trc: can't refresh fast enough, " + printk(BIOS_NOTICE, "update_dimm_Trc: can't refresh fast enough, " "want %i clocks, can %i clocks\n", clocks, DTL_TRC_MIN); clocks = DTL_TRC_MIN; } @@ -2057,7 +2057,7 @@ static int update_dimm_TT_1_4(const struct mem_controller *ctrl, const struct me } if (clocks > TT_MAX) { - printk_info("warning spd byte : %x = %x > TT_MAX: %x, setting TT_MAX", SPD_TT, value, TT_MAX); + printk(BIOS_INFO, "warning spd byte : %x = %x > TT_MAX: %x, setting TT_MAX", SPD_TT, value, TT_MAX); clocks = TT_MAX; } @@ -2372,7 +2372,7 @@ static void set_ecc(const struct mem_controller *ctrl, if (!(meminfo->dimm_mask & (1 << i))) { if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */ spd_device = ctrl->channel1[i]; - printk_debug("set_ecc spd_device: 0x%x\n", spd_device); + printk(BIOS_DEBUG, "set_ecc spd_device: 0x%x\n", spd_device); } else { continue; } @@ -2405,7 +2405,7 @@ static void set_TT(const struct mem_controller *ctrl, uint32_t reg; if ((val < TT_MIN) || (val > TT_MAX)) { - printk_err(str); + printk(BIOS_ERR, str); die(" Unknown\n"); } @@ -2765,7 +2765,7 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, continue; dimm_err: - printk_debug("spd_set_dram_timing dimm_err!\n"); + printk(BIOS_DEBUG, "spd_set_dram_timing dimm_err!\n"); if (rc < 0) { return -1; } @@ -2815,7 +2815,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl, #endif meminfo = &sysinfo->meminfo[ctrl->node_id]; - printk_debug("sdram_set_spd_registers: paramx :%p\n", ¶mx); + printk(BIOS_DEBUG, "sdram_set_spd_registers: paramx :%p\n", ¶mx); activate_spd_rom(ctrl); meminfo->dimm_mask = spd_detect_dimms(ctrl); @@ -2824,7 +2824,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl, if (!(meminfo->dimm_mask & ((1 << 2*DIMM_SOCKETS) - 1))) { - printk_debug("No memory for this cpu\n"); + printk(BIOS_DEBUG, "No memory for this cpu\n"); return; } meminfo->dimm_mask = spd_enable_2channels(ctrl, meminfo); @@ -3000,7 +3000,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, /* FIXME: How about 32 node machine later? */ tsc_t tsc, tsc0[8]; - printk_debug("sdram_enable: tsc0[8]: %p", &tsc0[0]); + printk(BIOS_DEBUG, "sdram_enable: tsc0[8]: %p", &tsc0[0]); uint32_t dword; #endif @@ -3034,9 +3034,9 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, /* lets override the rest of the routine */ if (suspend) { - printk_debug("Wakeup!\n"); + printk(BIOS_DEBUG, "Wakeup!\n"); exit_from_self(controllers, ctrl, sysinfo); - printk_debug("Mem running !\n"); + printk(BIOS_DEBUG, "Mem running !\n"); return; } @@ -3054,7 +3054,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); if (dcl & DCL_DimmEccEn) { uint32_t mnc; - printk_spew("ECC enabled\n"); + printk(BIOS_SPEW, "ECC enabled\n"); mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG); mnc |= MNC_ECC_EN; if (dcl & DCL_Width128) { @@ -3089,17 +3089,17 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, /* Skip everything if I don't have any memory on this controller */ if (sysinfo->meminfo[i].dimm_mask==0x00) continue; - printk_debug("Initializing memory: "); + printk(BIOS_DEBUG, "Initializing memory: "); int loops = 0; do { dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); loops++; if ((loops & 1023) == 0) { - printk_debug("."); + printk(BIOS_DEBUG, "."); } } while(((dcl & DCL_InitDram) != 0) && (loops < TIMEOUT_LOOPS)); if (loops >= TIMEOUT_LOOPS) { - printk_debug(" failed\n"); + printk(BIOS_DEBUG, " failed\n"); continue; } @@ -3127,7 +3127,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, print_debug_dqs_tsc(" dtsc0", i, tsc0[i].hi, tsc0[i].lo, 2); } #endif - printk_debug(" done\n"); + printk(BIOS_DEBUG, " done\n"); } #if CONFIG_HW_MEM_HOLE_SIZEK != 0 diff --git a/src/northbridge/amd/amdk8/raminit_f_dqs.c b/src/northbridge/amd/amdk8/raminit_f_dqs.c index 6ff7a95044..89ccf907cb 100644 --- a/src/northbridge/amd/amdk8/raminit_f_dqs.c +++ b/src/northbridge/amd/amdk8/raminit_f_dqs.c @@ -25,7 +25,7 @@ static inline void print_debug_dqs(const char *str, unsigned val, unsigned level { #if DQS_TRAIN_DEBUG > 0 if(DQS_TRAIN_DEBUG > level) { - printk_debug("%s%x\r\n", str, val); + printk(BIOS_DEBUG, "%s%x\r\n", str, val); } #endif } @@ -34,7 +34,7 @@ static inline void print_debug_dqs_pair(const char *str, unsigned val, const cha { #if DQS_TRAIN_DEBUG > 0 if(DQS_TRAIN_DEBUG > level) { - printk_debug("%s%08x%s%08x\r\n", str, val, str2, val2); + printk(BIOS_DEBUG, "%s%08x%s%08x\r\n", str, val, str2, val2); } #endif } @@ -43,14 +43,14 @@ static inline void print_debug_dqs_tsc(const char *str, unsigned i, unsigned val { #if DQS_TRAIN_DEBUG > 0 if(DQS_TRAIN_DEBUG > level) { - printk_debug("%s[%02x]=%08x%08x\r\n", str, i, val, val2); + printk(BIOS_DEBUG, "%s[%02x]=%08x%08x\r\n", str, i, val, val2); } #endif } static inline void print_debug_dqs_tsc_x(const char *str, unsigned i, unsigned val, unsigned val2) { - printk_debug("%s[%02x]=%08x%08x\r\n", str, i, val, val2); + printk(BIOS_DEBUG, "%s[%02x]=%08x%08x\r\n", str, i, val, val2); } @@ -854,7 +854,7 @@ static unsigned TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, st #if CONFIG_MEM_TRAIN_SEQ != 1 /* We need tidy output for type 1 */ - printk_debug(" CTLRMaxDelay=%02x\n", CTLRMaxDelay); + printk(BIOS_DEBUG, " CTLRMaxDelay=%02x\n", CTLRMaxDelay); #endif return (CTLRMaxDelay==0xae)?1:0; @@ -1130,7 +1130,7 @@ static unsigned TrainDQSPos(const struct mem_controller *ctrl, unsigned channel, print_debug_dqs("\t\t\tTrainDQSPos begin ", 0, 3); - printk_debug("TrainDQSPos: MutualCSPassW[48] :%p\n", MutualCSPassW); + printk(BIOS_DEBUG, "TrainDQSPos: MutualCSPassW[48] :%p\n", MutualCSPassW); for(DQSDelay=0; DQSDelay<48; DQSDelay++) { MutualCSPassW[DQSDelay] = 0xff; // Bitmapped status per delay setting, 0xff=All positions passing (1= PASS) @@ -1403,7 +1403,7 @@ static unsigned TrainDQSRdWrPos(const struct mem_controller *ctrl, struct sys_in print_debug_dqs("\r\nTrainDQSRdWrPos: 0 ctrl ", ctrl->node_id, 0); - printk_debug("TrainDQSRdWrPos: buf_a:%p\n", buf_a); + printk(BIOS_DEBUG, "TrainDQSRdWrPos: buf_a:%p\n", buf_a); Errors = 0; channel = 0; @@ -1537,7 +1537,7 @@ static unsigned train_DqsPos(const struct mem_controller *ctrl, struct sys_info { print_debug_dqs("\r\ntrain_DqsPos: begin ctrl ", ctrl->node_id, 0); if(TrainDQSRdWrPos(ctrl, sysinfo) != 0) { - printk_err("\r\nDQS Training Rd Wr failed ctrl%02x\r\n", ctrl->node_id); + printk(BIOS_ERR, "\r\nDQS Training Rd Wr failed ctrl%02x\r\n", ctrl->node_id); return 1; } else { @@ -1700,7 +1700,7 @@ static unsigned int range_to_mtrr(unsigned int reg, } sizek = 1 << align; #if CONFIG_MEM_TRAIN_SEQ != 1 - printk_debug("Setting variable MTRR %d, base: %4dMB, range: %4dMB, type %s\r\n", + printk(BIOS_DEBUG, "Setting variable MTRR %d, base: %4dMB, range: %4dMB, type %s\r\n", reg, range_startk >>10, sizek >> 10, (type==MTRR_TYPE_UNCACHEABLE)?"UC": ((type==MTRR_TYPE_WRBACK)?"WB":"Other") @@ -1895,7 +1895,7 @@ static void dqs_save_MC_NVRAM(unsigned int dev) { int pos = 0; u32 reg; - printk_debug("DQS SAVE NVRAM: %x\n", dev); + printk(BIOS_DEBUG, "DQS SAVE NVRAM: %x\n", dev); pos = dqs_save_MC_NVRAM_ch(dev, 0, pos); pos = dqs_save_MC_NVRAM_ch(dev, 1, pos); /* save the maxasync lat here */ @@ -1908,7 +1908,7 @@ static void dqs_restore_MC_NVRAM(unsigned int dev) int pos = 0; u32 reg; - printk_debug("DQS RESTORE FROM NVRAM: %x\n", dev); + printk(BIOS_DEBUG, "DQS RESTORE FROM NVRAM: %x\n", dev); pos = dqs_load_MC_NVRAM_ch(dev, 0, pos); pos = dqs_load_MC_NVRAM_ch(dev, 1, pos); /* load the maxasync lat here */ @@ -1950,9 +1950,9 @@ static void dqs_timing(int controllers, const struct mem_controller *ctrl, struc /* Skip everything if I don't have any memory on this controller */ if(sysinfo->meminfo[i].dimm_mask==0x00) continue; - printk_debug("DQS Training:RcvrEn:Pass1: %02x\n", i); + printk(BIOS_DEBUG, "DQS Training:RcvrEn:Pass1: %02x\n", i); if(train_DqsRcvrEn(ctrl+i, 1, sysinfo)) goto out; - printk_debug(" done\r\n"); + printk(BIOS_DEBUG, " done\r\n"); } tsc[1] = rdtsc(); @@ -1968,9 +1968,9 @@ static void dqs_timing(int controllers, const struct mem_controller *ctrl, struc /* Skip everything if I don't have any memory on this controller */ if(sysinfo->meminfo[i].dimm_mask==0x00) continue; - printk_debug("DQS Training:DQSPos: %02x\n", i); + printk(BIOS_DEBUG, "DQS Training:DQSPos: %02x\n", i); if(train_DqsPos(ctrl+i, sysinfo)) goto out; - printk_debug(" done\r\n"); + printk(BIOS_DEBUG, " done\r\n"); } tsc[3] = rdtsc(); @@ -1981,9 +1981,9 @@ static void dqs_timing(int controllers, const struct mem_controller *ctrl, struc /* Skip everything if I don't have any memory on this controller */ if(sysinfo->meminfo[i].dimm_mask==0x00) continue; - printk_debug("DQS Training:RcvrEn:Pass2: %02x\n", i); + printk(BIOS_DEBUG, "DQS Training:RcvrEn:Pass2: %02x\n", i); if(train_DqsRcvrEn(ctrl+i, 2, sysinfo)) goto out; - printk_debug(" done\r\n"); + printk(BIOS_DEBUG, " done\r\n"); sysinfo->mem_trained[i]=1; dqs_save_MC_NVRAM((ctrl+i)->f2); } @@ -2025,7 +2025,7 @@ static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info if(v) { tsc[0] = rdtsc(); - printk_debug("set DQS timing:RcvrEn:Pass1: %02x\n", i); + printk(BIOS_DEBUG, "set DQS timing:RcvrEn:Pass1: %02x\n", i); } if(train_DqsRcvrEn(ctrl, 1, sysinfo)) { sysinfo->mem_trained[i]=0x81; // @@ -2033,9 +2033,9 @@ static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info } if(v) { - printk_debug(" done\r\n"); + printk(BIOS_DEBUG, " done\r\n"); tsc[1] = rdtsc(); - printk_debug("set DQS timing:DQSPos: %02x\n", i); + printk(BIOS_DEBUG, "set DQS timing:DQSPos: %02x\n", i); } if(train_DqsPos(ctrl, sysinfo)) { @@ -2044,10 +2044,10 @@ static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info } if(v) { - printk_debug(" done\r\n"); + printk(BIOS_DEBUG, " done\r\n"); tsc[2] = rdtsc(); - printk_debug("set DQS timing:RcvrEn:Pass2: %02x\n", i); + printk(BIOS_DEBUG, "set DQS timing:RcvrEn:Pass2: %02x\n", i); } if(train_DqsRcvrEn(ctrl, 2, sysinfo)){ sysinfo->mem_trained[i]=0x83; // @@ -2055,7 +2055,7 @@ static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info } if(v) { - printk_debug(" done\r\n"); + printk(BIOS_DEBUG, " done\r\n"); tsc[3] = rdtsc(); } @@ -2106,7 +2106,7 @@ static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sy #endif set_top_mem_ap(sysinfo->tom_k, sysinfo->tom2_k); // keep the ap's tom consistent with bsp's #if CONFIG_AP_CODE_IN_CAR == 0 - printk_debug("CODE IN ROM AND RUN ON NODE: %02x\n", nodeid); + printk(BIOS_DEBUG, "CODE IN ROM AND RUN ON NODE: %02x\n", nodeid); train_ram(nodeid, sysinfo, sysinfox); #else /* Can copy dqs_timing to ap cache and run from cache? diff --git a/src/northbridge/amd/amdk8/setup_resource_map.c b/src/northbridge/amd/amdk8/setup_resource_map.c index 728ba88427..cd7b3b54b4 100644 --- a/src/northbridge/amd/amdk8/setup_resource_map.c +++ b/src/northbridge/amd/amdk8/setup_resource_map.c @@ -49,7 +49,7 @@ static void setup_resource_map_x_offset(const unsigned int *register_values, int #endif for(i = 0; i < max; i += 4) { #if RES_DEBUG - printk_debug("%04x: %02x %08x <- & %08x | %08x\r\n", + printk(BIOS_DEBUG, "%04x: %02x %08x <- & %08x | %08x\r\n", i>>2, register_values[i], register_values[i+1] + ( (register_values[i]==RES_PCI_IO) ? offset_pci_dev : 0), register_values[i+2], @@ -129,7 +129,7 @@ static void setup_resource_map_x(const unsigned int *register_values, int max) #endif for(i = 0; i < max; i += 4) { #if RES_DEBUG - printk_debug("%04x: %02x %08x <- & %08x | %08x\r\n", + printk(BIOS_DEBUG, "%04x: %02x %08x <- & %08x | %08x\r\n", i/4, register_values[i],register_values[i+1], register_values[i+2], register_values[i+3]); #endif switch (register_values[i]) { diff --git a/src/northbridge/amd/amdmct/mct/mct_d.c b/src/northbridge/amd/amdmct/mct/mct_d.c index 22e990255d..ec767fa27c 100644 --- a/src/northbridge/amd/amdmct/mct/mct_d.c +++ b/src/northbridge/amd/amdmct/mct/mct_d.c @@ -556,7 +556,7 @@ static void HTMemMapInit_D(struct MCTStatStruc *pMCTstat, base += NextBase; limit += NextBase; DramSelBaseAddr += NextBase; - printk_debug(" Node: %02x base: %02x limit: %02x BottomIO: %02x\n", Node, base, limit, BottomIO); + printk(BIOS_DEBUG, " Node: %02x base: %02x limit: %02x BottomIO: %02x\n", Node, base, limit, BottomIO); if (_MemHoleRemap) { if ((base < BottomIO) && (limit >= BottomIO)) { @@ -633,7 +633,7 @@ static void HTMemMapInit_D(struct MCTStatStruc *pMCTstat, devx = pDCTstat->dev_map; if (pDCTstat->NodePresent) { - printk_debug(" Copy dram map from Node 0 to Node %02x \n", Node); + printk(BIOS_DEBUG, " Copy dram map from Node 0 to Node %02x \n", Node); reg = 0x40; /*Dram Base 0*/ do { val = Get_NB32(dev, reg); diff --git a/src/northbridge/amd/amdmct/mct/mctdqs_d.c b/src/northbridge/amd/amdmct/mct/mctdqs_d.c index 7f8b8960fd..9dfccd9c4e 100644 --- a/src/northbridge/amd/amdmct/mct/mctdqs_d.c +++ b/src/northbridge/amd/amdmct/mct/mctdqs_d.c @@ -69,7 +69,7 @@ static void print_debug_dqs(const char *str, u32 val, u8 level) { #if DQS_TRAIN_DEBUG > 0 if (DQS_TRAIN_DEBUG >= level) { - printk_debug("%s%x\n", str, val); + printk(BIOS_DEBUG, "%s%x\n", str, val); } #endif } @@ -78,7 +78,7 @@ static void print_debug_dqs_pair(const char *str, u32 val, const char *str2, u32 { #if DQS_TRAIN_DEBUG > 0 if (DQS_TRAIN_DEBUG >= level) { - printk_debug("%s%08x%s%08x\n", str, val, str2, val2); + printk(BIOS_DEBUG, "%s%08x%s%08x\n", str, val, str2, val2); } #endif } diff --git a/src/northbridge/amd/gx1/northbridge.c b/src/northbridge/amd/gx1/northbridge.c index 4eb02c7ded..1b0214d9fd 100644 --- a/src/northbridge/amd/gx1/northbridge.c +++ b/src/northbridge/amd/gx1/northbridge.c @@ -42,11 +42,11 @@ static void enable_shadow(device_t dev) static void northbridge_init(device_t dev) { - printk_debug("northbridge: %s()\n", __func__); + printk(BIOS_DEBUG, "northbridge: %s()\n", __func__); optimize_xbus(dev); enable_shadow(dev); - printk_spew("Calling enable_cache()\n"); + printk(BIOS_SPEW, "Calling enable_cache()\n"); enable_cache(); } @@ -140,10 +140,10 @@ static void pci_domain_set_resources(device_t dev) *bcdramtop = ((tomk << 10) - 1); *mcgbaseadd = (tomk >> 9); - printk_debug("BC_DRAM_TOP = 0x%08x\n", *bcdramtop); - printk_debug("MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd); + printk(BIOS_DEBUG, "BC_DRAM_TOP = 0x%08x\n", *bcdramtop); + printk(BIOS_DEBUG, "MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd); - printk_debug("I would set ram size to %d Mbytes\n", (tomk >> 10)); + printk(BIOS_DEBUG, "I would set ram size to %d Mbytes\n", (tomk >> 10)); /* Compute the top of Low memory */ tolmk = pci_tolm >> 10; @@ -176,7 +176,7 @@ static struct device_operations pci_domain_ops = { static void cpu_bus_init(device_t dev) { - printk_spew("%s:%s()\n", NORTHBRIDGE_FILE, __func__); + printk(BIOS_SPEW, "%s:%s()\n", NORTHBRIDGE_FILE, __func__); initialize_cpus(&dev->link[0]); } @@ -194,18 +194,18 @@ static struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew("%s:%s()\n", NORTHBRIDGE_FILE, __func__); + printk(BIOS_SPEW, "%s:%s()\n", NORTHBRIDGE_FILE, __func__); /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { - printk_spew("DEVICE_PATH_PCI_DOMAIN\n"); + printk(BIOS_SPEW, "DEVICE_PATH_PCI_DOMAIN\n"); dev->ops = &pci_domain_ops; pci_set_method(dev); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { - printk_spew("DEVICE_PATH_APIC_CLUSTER\n"); + printk(BIOS_SPEW, "DEVICE_PATH_APIC_CLUSTER\n"); dev->ops = &cpu_bus_ops; } else { - printk_spew("device path type %d\n",dev->path.type); + printk(BIOS_SPEW, "device path type %d\n",dev->path.type); } } diff --git a/src/northbridge/amd/gx2/chipsetinit.c b/src/northbridge/amd/gx2/chipsetinit.c index 53a90535a5..cbb4e65620 100644 --- a/src/northbridge/amd/gx2/chipsetinit.c +++ b/src/northbridge/amd/gx2/chipsetinit.c @@ -87,7 +87,7 @@ static int is_5536(void){ msr_t msr; msr = rdmsr(GLIU_SB_GLD_MSR_CAP); msr.lo >>= 20; - printk_debug("is_5536: msr.lo is 0x%x(==5 means 5536)\n", msr.lo&0xf); + printk(BIOS_DEBUG, "is_5536: msr.lo is 0x%x(==5 means 5536)\n", msr.lo&0xf); return ((msr.lo&0xf) == 5); } /* ***************************************************************************/ @@ -205,10 +205,10 @@ static void ChipsetFlashSetup(void) int i; int numEnabled = 0; - printk_debug("ChipsetFlashSetup++\n"); + printk(BIOS_DEBUG, "ChipsetFlashSetup++\n"); for (i = 0; i < FlashInitTableLen; i++) { if (FlashInitTable[i].fType != FLASH_TYPE_NONE) { - printk_debug("Enable CS%d\n", i); + printk(BIOS_DEBUG, "Enable CS%d\n", i); /* we need to configure the memory/IO mask */ msr = rdmsr(FlashPort[i]); msr.hi = 0; /* start with the "enabled" bit clear */ @@ -221,13 +221,13 @@ static void ChipsetFlashSetup(void) else msr.hi &= ~0x00000004; msr.hi |= FlashInitTable[i].fMask; - printk_debug("WRMSR(0x%08X, %08X_%08X)\n", FlashPort[i], msr.hi, msr.lo); + printk(BIOS_DEBUG, "WRMSR(0x%08X, %08X_%08X)\n", FlashPort[i], msr.hi, msr.lo); wrmsr(FlashPort[i], msr); /* now write-enable the device */ msr = rdmsr(MDD_NORF_CNTRL); msr.lo |= (1 << i); - printk_debug("WRMSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, msr.hi, msr.lo); + printk(BIOS_DEBUG, "WRMSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, msr.hi, msr.lo); wrmsr(MDD_NORF_CNTRL, msr); /* update the number enabled */ @@ -239,10 +239,10 @@ static void ChipsetFlashSetup(void) if (0 != numEnabled) { msr = rdmsr(MDD_PIN_OPT); msr.lo &= ~1; /* PIN_OPT_IDE */ - printk_debug("WRMSR(0x%08X, %08X_%08X)\n", MDD_PIN_OPT, msr.hi, msr.lo); + printk(BIOS_DEBUG, "WRMSR(0x%08X, %08X_%08X)\n", MDD_PIN_OPT, msr.hi, msr.lo); wrmsr(MDD_PIN_OPT, msr); } - printk_debug("ChipsetFlashSetup--\n"); + printk(BIOS_DEBUG, "ChipsetFlashSetup--\n"); } @@ -359,7 +359,7 @@ chipsetinit (struct northbridge_amd_gx2_config *nb){ /* Flash Setup*/ - printk_err("%sDOING ChipsetFlashSetup()!!!!!!!!!!!!!!!!!!\n", nb->setupflash? " " : "NOT"); + printk(BIOS_ERR, "%sDOING ChipsetFlashSetup()!!!!!!!!!!!!!!!!!!\n", nb->setupflash? " " : "NOT"); if (nb->setupflash) ChipsetFlashSetup(); diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c index b20d3d7829..274277d7fc 100644 --- a/src/northbridge/amd/gx2/northbridge.c +++ b/src/northbridge/amd/gx2/northbridge.c @@ -32,7 +32,7 @@ sizeram(void) unsigned short dimm; msr = rdmsr(0x20000018); - printk_debug("sizeram: %08x:%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "sizeram: %08x:%08x\n", msr.hi, msr.lo); /* dimm 0 */ dimm = msr.hi; @@ -47,7 +47,7 @@ sizeram(void) if ((dimm & 7) != 7) sizem += (1 << ((dimm >> 12)-1)) * 8; - printk_debug("sizeram: sizem 0x%x\n", sizem); + printk(BIOS_DEBUG, "sizeram: sizem 0x%x\n", sizem); return sizem; } @@ -127,7 +127,7 @@ static void irq_init_steering(struct device *dev, uint16_t irq_map) { /* Set up IRQ steering */ uint32_t pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; - printk_debug("%s(%08X [%08X], %04X)\n", __func__, dev, pciAddr, irq_map); + printk(BIOS_DEBUG, "%s(%08X [%08X], %04X)\n", __func__, dev, pciAddr, irq_map); /* The IRQ steering values (in hex) are effectively dcba, where: * <a> represents the IRQ for INTA, @@ -160,7 +160,7 @@ setup_gx2_cache(void) int sizekbytes, sizereg; sizekbytes = sizeram() * 1024; - printk_debug("setup_gx2_cache: enable for %d KB\n", sizekbytes); + printk(BIOS_DEBUG, "setup_gx2_cache: enable for %d KB\n", sizekbytes); /* build up the rconf word. */ /* the SYSTOP bits 27:8 are actually the top bits from 31:12. Book fails to say that */ /* set romrp */ @@ -181,7 +181,7 @@ setup_gx2_cache(void) val |= RAM_PROPERTIES; msr.lo = val; msr.hi = (val >> 32); - printk_debug("msr 0x%08X will be set to %08x:%08x\n", CPU_RCONF_DEFAULT, msr.hi, msr.lo); + printk(BIOS_DEBUG, "msr 0x%08X will be set to %08x:%08x\n", CPU_RCONF_DEFAULT, msr.hi, msr.lo); wrmsr(CPU_RCONF_DEFAULT, msr); enable_cache(); @@ -214,7 +214,7 @@ setup_gx2(void) #if 0 /* This has already been done elsewhere */ - printk_debug("size_kb 0x%x, membytes 0x%x\n", size_kb, membytes); + printk(BIOS_DEBUG, "size_kb 0x%x, membytes 0x%x\n", size_kb, membytes); msr.hi = 0x20000000 | membytes>>24; msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20); wrmsr(0x10000028, msr); @@ -224,9 +224,9 @@ setup_gx2(void) #endif #if 0 msr = rdmsr(0x10000028); - printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo); + printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo); msr = rdmsr(0x40000029); - printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo); + printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo); #endif #if 1 /* fixme: SMM MSR 0x10000026 and 0x400000023 */ @@ -240,7 +240,7 @@ setup_gx2(void) /* calculate the PBASE and PMASK fields */ tmp2 = (SMM_OFFSET << 8) & 0xFFF00000; /* shift right 12 then left 20 == left 8 */ tmp2 |= (((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff); - printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, tmp, tmp2); + printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, tmp, tmp2); msr.hi = tmp; msr.lo = tmp2; wrmsr(0x10000026, msr); @@ -251,14 +251,14 @@ setup_gx2(void) msr.lo = 0x400fffc0; wrmsr(0x10000026, msr); msr = rdmsr(0x10000026); - printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, msr.hi, msr.lo); + printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, msr.hi, msr.lo); #endif #if 0 msr.hi = 0x22fffc02; msr.lo = 0x10ffbf00; wrmsr(0x1808, msr); msr = rdmsr(0x1808); - printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x1808, msr.hi, msr.lo); + printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x1808, msr.hi, msr.lo); #endif #if 0 // SDG - don't do this /* now do the default MSR values */ @@ -266,7 +266,7 @@ setup_gx2(void) msr_t msr; wrmsr(msr_defaults[i].msr_no, msr_defaults[i].msr); // MSR - see table above msr = rdmsr(msr_defaults[i].msr_no); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", msr_defaults[i].msr_no, msr.hi,msr.lo); + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", msr_defaults[i].msr_no, msr.hi,msr.lo); } #endif } @@ -281,7 +281,7 @@ static void northbridge_init(device_t dev) unsigned long m; struct northbridge_amd_gx2_config *nb = (struct northbridge_amd_gx2_config *)dev->chip_info; - printk_debug("northbridge: %s()\n", __func__); + printk(BIOS_DEBUG, "northbridge: %s()\n", __func__); enable_shadow(dev); irq_init_steering(dev, nb->irqmap); @@ -429,10 +429,10 @@ static void pci_domain_set_resources(device_t dev) *bcdramtop = ((tomk << 10) - 1); *mcgbaseadd = (tomk >> 9); - printk_debug("BC_DRAM_TOP = 0x%08x\n", *bcdramtop); - printk_debug("MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd); + printk(BIOS_DEBUG, "BC_DRAM_TOP = 0x%08x\n", *bcdramtop); + printk(BIOS_DEBUG, "MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd); - printk_debug("I would set ram size to %d Mbytes\n", (tomk >> 10)); + printk(BIOS_DEBUG, "I would set ram size to %d Mbytes\n", (tomk >> 10)); /* Compute the top of Low memory */ tolmk = pci_tolm >> 10; @@ -483,7 +483,7 @@ extern uint64_t high_tables_base, high_tables_size; static void enable_dev(struct device *dev) { - printk_debug("gx2 north: enable_dev\n"); + printk(BIOS_DEBUG, "gx2 north: enable_dev\n"); void northbridgeinit(void); void chipsetinit(struct northbridge_amd_gx2_config *nb); void do_vsmbios(void); @@ -492,7 +492,7 @@ static void enable_dev(struct device *dev) struct northbridge_amd_gx2_config *nb = (struct northbridge_amd_gx2_config *)dev->chip_info; extern void cpubug(void); u32 tomk; - printk_debug("DEVICE_PATH_PCI_DOMAIN\n"); + printk(BIOS_DEBUG, "DEVICE_PATH_PCI_DOMAIN\n"); /* cpubug MUST be called before setup_gx2(), so we force the issue here */ northbridgeinit(); cpubug(); @@ -510,10 +510,10 @@ static void enable_dev(struct device *dev) #endif ram_resource(dev, 0, 0, tomk); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { - printk_debug("DEVICE_PATH_APIC_CLUSTER\n"); + printk(BIOS_DEBUG, "DEVICE_PATH_APIC_CLUSTER\n"); dev->ops = &cpu_bus_ops; } - printk_debug("gx2 north: end enable_dev\n"); + printk(BIOS_DEBUG, "gx2 north: end enable_dev\n"); } struct chip_operations northbridge_amd_gx2_ops = { diff --git a/src/northbridge/amd/gx2/northbridgeinit.c b/src/northbridge/amd/gx2/northbridgeinit.c index 995c1f3212..491466577d 100644 --- a/src/northbridge/amd/gx2/northbridgeinit.c +++ b/src/northbridge/amd/gx2/northbridgeinit.c @@ -112,10 +112,10 @@ writeglmsr(struct gliutable *gl){ msr.lo = gl->lo; msr.hi = gl->hi; wrmsr(gl->desc_name, msr); // MSR - see table above - printk_debug("%s: write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); /* they do this, so we do this */ msr = rdmsr(gl->desc_name); - printk_debug("%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void @@ -147,7 +147,7 @@ SysmemInit(struct gliutable *gl) * system. We will adjust for SMM and DMM now and Frame Buffer later. */ sizembytes = sizeram(); - printk_debug("%s: enable for %dm bytes\n", __func__, sizembytes); + printk(BIOS_DEBUG, "%s: enable for %dm bytes\n", __func__, sizembytes); sizebytes = sizembytes << 20; sizebytes -= SMM_SIZE*1024 +1; @@ -164,7 +164,7 @@ SysmemInit(struct gliutable *gl) msr.lo = sizebytes; wrmsr(gl->desc_name, msr); // MSR - see table above msr = rdmsr(gl->desc_name); - printk_debug("%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, + printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } @@ -177,11 +177,11 @@ DMMGL0Init(struct gliutable *gl) { if (! havedmi) return; - printk_debug("%s: %d bytes\n", __func__, sizebytes); + printk(BIOS_DEBUG, "%s: %d bytes\n", __func__, sizebytes); sizebytes -= DMM_SIZE*1024; offset = sizebytes - DMM_OFFSET; - printk_debug("%s: offset is 0x%08x\n", __func__, offset); + printk(BIOS_DEBUG, "%s: offset is 0x%08x\n", __func__, offset); offset >>= 12; msr.hi = (gl->hi) | (offset << 8); /* I don't think this is needed */ @@ -192,7 +192,7 @@ DMMGL0Init(struct gliutable *gl) { wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); - printk_debug("%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void @@ -202,7 +202,7 @@ DMMGL1Init(struct gliutable *gl) { if (! havedmi) return; - printk_debug("%s:\n", __func__ ); + printk(BIOS_DEBUG, "%s:\n", __func__ ); msr.hi = gl->hi; /* I don't think this is needed */ @@ -210,12 +210,12 @@ DMMGL1Init(struct gliutable *gl) { msr.hi |= (DMM_OFFSET >> 24); msr.lo = DMM_OFFSET << 8; /* hmm. AMD source has SMM here ... SMM, not DMM? We think DMM */ - printk_err("%s: warning, using DMM_SIZE even though AMD used SMM_SIZE\n", __func__); + printk(BIOS_ERR, "%s: warning, using DMM_SIZE even though AMD used SMM_SIZE\n", __func__); msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); - printk_debug("%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void SMMGL0Init(struct gliutable *gl) { @@ -228,10 +228,10 @@ SMMGL0Init(struct gliutable *gl) { if (havedmi) sizebytes -= DMM_SIZE * 1024; - printk_debug("%s: %d bytes\n", __func__, sizebytes); + printk(BIOS_DEBUG, "%s: %d bytes\n", __func__, sizebytes); offset = sizebytes - SMM_OFFSET; - printk_debug("%s: offset is 0x%08x\n", __func__, offset); + printk(BIOS_DEBUG, "%s: offset is 0x%08x\n", __func__, offset); offset >>= 12; msr.hi = offset << 8; @@ -242,12 +242,12 @@ SMMGL0Init(struct gliutable *gl) { wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); - printk_debug("%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void SMMGL1Init(struct gliutable *gl) { msr_t msr; - printk_debug("%s:\n", __func__ ); + printk(BIOS_DEBUG, "%s:\n", __func__ ); msr.hi = gl->hi; /* I don't think this is needed */ @@ -258,7 +258,7 @@ SMMGL1Init(struct gliutable *gl) { wrmsr(gl->desc_name, msr); // MSR - See table above msr = rdmsr(gl->desc_name); - printk_debug("%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void @@ -350,7 +350,7 @@ static void GLPCIInit(void){ /* So we need a high page aligned addresss (pah) and low page aligned address (pal) * pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12 */ - printk_debug("GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); + printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); pah = ((msr.hi &0xff) << 12) | ((msr.lo >> 20) & 0xfff); /* we have the page address. Now make it a page-aligned address */ pah <<= 12; @@ -359,7 +359,7 @@ static void GLPCIInit(void){ msr.hi = pah; msr.lo = pal; msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET | GLPCI_RC_LOWER_WC_SET; - printk_debug("GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); + printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); msrnum = GLPCI_RC1; wrmsr(msrnum, msr); } @@ -507,10 +507,10 @@ performance: for(i = 0; gating->msrnum != 0xffffffff; i++) { msr = rdmsr(gating->msrnum); - printk_debug("%s: MSR 0x%08x is 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: MSR 0x%08x is 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); msr.hi |= gating->msr.hi; msr.lo |= gating->msr.lo; - printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, + printk(BIOS_DEBUG, "%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); wrmsr(gating->msrnum, msr); // MSR - See the table above gating +=1; @@ -526,11 +526,11 @@ GeodeLinkPriority(void){ for(i = 0; prio->msrnum != 0xffffffff; i++) { msr = rdmsr(prio->msrnum); - printk_debug("%s: MSR 0x%08x is 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); + printk(BIOS_DEBUG, "%s: MSR 0x%08x is 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); msr.hi |= prio->msr.hi; msr.lo &= ~0xfff; msr.lo |= prio->msr.lo; - printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, + printk(BIOS_DEBUG, "%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); wrmsr(prio->msrnum, msr); // MSR - See the table above prio +=1; @@ -772,7 +772,7 @@ northbridgeinit(void) { msr_t msr; int i; - printk_debug("Enter %s\n", __func__); + printk(BIOS_DEBUG, "Enter %s\n", __func__); for(i = 0; gliutables[i]; i++) GLIUInit(gliutables[i]); @@ -803,6 +803,6 @@ northbridgeinit(void) ClockGatingInit(); __asm__("FINIT\n"); /* CPUBugsFix -- called elsewhere */ - printk_debug("Exit %s\n", __func__); + printk(BIOS_DEBUG, "Exit %s\n", __func__); } diff --git a/src/northbridge/amd/lx/grphinit.c b/src/northbridge/amd/lx/grphinit.c index 1312d78f84..85e6a45ba0 100644 --- a/src/northbridge/amd/lx/grphinit.c +++ b/src/northbridge/amd/lx/grphinit.c @@ -70,7 +70,7 @@ void graphics_init(void) uint16_t wClassIndex, wData, res; /* SoftVG initialization */ - printk_debug("Graphics init...\n"); + printk(BIOS_DEBUG, "Graphics init...\n"); geodelx_vga_msr_init(); @@ -99,5 +99,5 @@ void graphics_init(void) vrWrite(wClassIndex, wData); res = vrRead(wClassIndex); - printk_debug("VRC_VG value: 0x%04x\n", res); + printk(BIOS_DEBUG, "VRC_VG value: 0x%04x\n", res); } diff --git a/src/northbridge/amd/lx/northbridge.c b/src/northbridge/amd/lx/northbridge.c index 935d1f2b5c..5c97649ce7 100644 --- a/src/northbridge/amd/lx/northbridge.c +++ b/src/northbridge/amd/lx/northbridge.c @@ -173,96 +173,96 @@ void print_conf(void) MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END }; - printk_debug("---------- CPU ------------\n"); + printk(BIOS_DEBUG, "---------- CPU ------------\n"); for (i = 0; cpu_msr_defs[i] != GL_END; i++) { msr = rdmsr(cpu_msr_defs[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", cpu_msr_defs[i], msr.hi, msr.lo); } - printk_debug("---------- GLIU 0 ------------\n"); + printk(BIOS_DEBUG, "---------- GLIU 0 ------------\n"); for (i = 0; gliu0_msr_defs[i] != GL_END; i++) { msr = rdmsr(gliu0_msr_defs[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", gliu0_msr_defs[i], msr.hi, msr.lo); } - printk_debug("---------- GLIU 1 ------------\n"); + printk(BIOS_DEBUG, "---------- GLIU 1 ------------\n"); for (i = 0; gliu1_msr_defs[i] != GL_END; i++) { msr = rdmsr(gliu1_msr_defs[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", gliu1_msr_defs[i], msr.hi, msr.lo); } - printk_debug("---------- RCONF ------------\n"); + printk(BIOS_DEBUG, "---------- RCONF ------------\n"); for (i = 0; rconf_msr[i] != GL_END; i++) { msr = rdmsr(rconf_msr[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], msr.hi, msr.lo); } - printk_debug("---------- VARIA ------------\n"); + printk(BIOS_DEBUG, "---------- VARIA ------------\n"); msr = rdmsr(0x51300010); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, msr.lo); msr = rdmsr(0x51400015); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, msr.lo); - printk_debug("---------- DIVIL IRQ ------------\n"); + printk(BIOS_DEBUG, "---------- DIVIL IRQ ------------\n"); msr = rdmsr(MDD_IRQM_YLOW); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, msr.lo); msr = rdmsr(MDD_IRQM_YHIGH); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, msr.hi, msr.lo); msr = rdmsr(MDD_IRQM_ZLOW); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, msr.lo); msr = rdmsr(MDD_IRQM_ZHIGH); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, msr.hi, msr.lo); - printk_debug("---------- PCI ------------\n"); + printk(BIOS_DEBUG, "---------- PCI ------------\n"); for (i = 0; pci_msr[i] != GL_END; i++) { msr = rdmsr(pci_msr[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], msr.hi, msr.lo); } - printk_debug("---------- LPC/UART DMA ------------\n"); + printk(BIOS_DEBUG, "---------- LPC/UART DMA ------------\n"); for (i = 0; dma_msr[i] != GL_END; i++) { msr = rdmsr(dma_msr[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], msr.hi, msr.lo); } - printk_debug("---------- CS5536 ------------\n"); + printk(BIOS_DEBUG, "---------- CS5536 ------------\n"); for (i = 0; cs5536_msr[i] != GL_END; i++) { msr = rdmsr(cs5536_msr[i]); - printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], + printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], msr.hi, msr.lo); } iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE); - printk_debug("IOR 0x%08X is now 0x%08lX\n", + printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol); iol = inl(GPIOL_EVENTS_ENABLE); - printk_debug("IOR 0x%08X is now 0x%08lX\n", + printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol); iol = inl(GPIOL_INPUT_INVERT_ENABLE); - printk_debug("IOR 0x%08X is now 0x%08lX\n", + printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol); iol = inl(GPIO_MAPPER_X); - printk_debug("IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIO_MAPPER_X, + printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIO_MAPPER_X, iol); #endif //CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR } @@ -278,7 +278,7 @@ int sizeram(void) /* Get the RAM size from the memory controller as calculated and set by auto_size_dimm() */ msr = rdmsr(MC_CF07_DATA); - printk_debug("sizeram: _MSR MC_CF07_DATA: %08x:%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "sizeram: _MSR MC_CF07_DATA: %08x:%08x\n", msr.hi, msr.lo); /* dimm 0 */ dimm = msr.hi; @@ -294,7 +294,7 @@ int sizeram(void) sizem += 4 << ((dimm >> 12) & 0x0F); /* 1:8MB, 2:16MB, 3:32MB, 4:64MB, ... 7:512MB, 8:1GB */ } - printk_debug("sizeram: sizem 0x%xMB\n", sizem); + printk(BIOS_DEBUG, "sizeram: sizem 0x%xMB\n", sizem); return sizem; } @@ -306,7 +306,7 @@ static void northbridge_init(device_t dev) { //msr_t msr; - printk_spew(">> Entering northbridge.c: %s\n", __func__); + printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); enable_shadow(dev); /* @@ -317,8 +317,8 @@ static void northbridge_init(device_t dev) //msr.hi |= 0x3; //msr.lo |= 0x30000; - //printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU0_SHADOW, msr.hi, msr.lo); - //printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU1_SHADOW, msr.hi, msr.lo); + //printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU0_SHADOW, msr.hi, msr.lo); + //printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU1_SHADOW, msr.hi, msr.lo); } void northbridge_set_resources(struct device *dev) @@ -340,8 +340,7 @@ void northbridge_set_resources(struct device *dev) struct bus *bus; bus = &dev->link[link]; if (bus->children) { - printk_debug - ("my_dev_set_resources: assign_resources %d\n", + printk(BIOS_DEBUG, "my_dev_set_resources: assign_resources %d\n", bus); assign_resources(bus); } @@ -406,7 +405,7 @@ static void pci_domain_set_resources(device_t dev) u32 tomk; device_t mc_dev; - printk_spew(">> Entering northbridge.c: %s\n", __func__); + printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); mc_dev = dev->link[0].children; if (mc_dev) { @@ -430,7 +429,7 @@ static void pci_domain_set_resources(device_t dev) static void pci_domain_enable(device_t dev) { - printk_spew(">> Entering northbridge.c: %s\n", __func__); + printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); // do this here for now -- this chip really breaks our device model northbridge_init_early(); @@ -439,12 +438,12 @@ static void pci_domain_enable(device_t dev) setup_realmode_idt(); - printk_debug("Before VSA:\n"); + printk(BIOS_DEBUG, "Before VSA:\n"); // print_conf(); do_vsmbios(); // do the magic stuff here, so prepare your tambourine ;) - printk_debug("After VSA:\n"); + printk(BIOS_DEBUG, "After VSA:\n"); // print_conf(); graphics_init(); @@ -461,7 +460,7 @@ static struct device_operations pci_domain_ops = { static void cpu_bus_init(device_t dev) { - printk_spew(">> Entering northbridge.c: %s\n", __func__); + printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); initialize_cpus(&dev->link[0]); } @@ -480,7 +479,7 @@ static struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew(">> Entering northbridge.c: %s with path %d\n", + printk(BIOS_SPEW, ">> Entering northbridge.c: %s with path %d\n", __func__, dev->path.type); /* Set the operations if it is a special bus type */ diff --git a/src/northbridge/amd/lx/northbridgeinit.c b/src/northbridge/amd/lx/northbridgeinit.c index 4336e82196..54cc057383 100644 --- a/src/northbridge/amd/lx/northbridgeinit.c +++ b/src/northbridge/amd/lx/northbridgeinit.c @@ -107,7 +107,7 @@ static void writeglmsr(struct gliutable *gl) msr.lo = gl->lo; msr.hi = gl->hi; wrmsr(gl->desc_name, msr); // MSR - see table above - printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); // GX3 + printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); // GX3 } static void ShadowInit(struct gliutable *gl) @@ -131,11 +131,11 @@ static void SysmemInit(struct gliutable *gl) * system. We will adjust for SMM now and Frame Buffer later. */ sizembytes = sizeram(); - printk_debug("%s: enable for %dMBytes\n", __func__, sizembytes); + printk(BIOS_DEBUG, "%s: enable for %dMBytes\n", __func__, sizembytes); sizebytes = sizembytes << 20; sizebytes -= ((SMM_SIZE * 1024) + 1); - printk_debug("usable RAM: %d bytes\n", sizebytes); + printk(BIOS_DEBUG, "usable RAM: %d bytes\n", sizebytes); /* 20 bit address The bottom 12 bits go into bits 20-31 in msr.lo The top 8 bits go into 0-7 of msr.hi. */ @@ -147,7 +147,7 @@ static void SysmemInit(struct gliutable *gl) msr.lo = sizebytes; wrmsr(gl->desc_name, msr); // MSR - see table above - printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, + printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } @@ -159,12 +159,12 @@ static void SMMGL0Init(struct gliutable *gl) sizebytes -= (SMM_SIZE * 1024); - printk_debug("%s: %d bytes\n", __func__, sizebytes); + printk(BIOS_DEBUG, "%s: %d bytes\n", __func__, sizebytes); /* calculate the Two's complement offset */ offset = sizebytes - SMM_OFFSET; offset = (offset >> 12) & 0x000fffff; - printk_debug("%s: offset is 0x%08x\n", __func__, SMM_OFFSET); + printk(BIOS_DEBUG, "%s: offset is 0x%08x\n", __func__, SMM_OFFSET); msr.hi = offset << 8 | gl->hi; msr.hi |= SMM_OFFSET >> 24; @@ -173,14 +173,14 @@ static void SMMGL0Init(struct gliutable *gl) msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above - printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, + printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } static void SMMGL1Init(struct gliutable *gl) { msr_t msr; - printk_debug("%s:\n", __func__); + printk(BIOS_DEBUG, "%s:\n", __func__); msr.hi = gl->hi; /* I don't think this is needed */ @@ -190,7 +190,7 @@ static void SMMGL1Init(struct gliutable *gl) msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff; wrmsr(gl->desc_name, msr); // MSR - See table above - printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, + printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } @@ -290,7 +290,7 @@ static void GLPCIInit(void) msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET | GLPCI_RC_LOWER_WC_SET; - printk_debug("GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n", + printk(BIOS_DEBUG, "GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); msrnum = GLPCI_RC1; wrmsr(msrnum, msr); @@ -304,7 +304,7 @@ static void GLPCIInit(void) (SMM_SIZE * 1024 - 1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT; msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET; - printk_debug("GLPCI R2: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, + printk(BIOS_DEBUG, "GLPCI R2: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); msrnum = GLPCI_RC2; wrmsr(msrnum, msr); @@ -435,7 +435,7 @@ static void ClockGatingInit(void) msr = rdmsr(gating->msrnum); msr.hi |= gating->msr.hi; msr.lo |= gating->msr.lo; - /* printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, + /* printk(BIOS_DEBUG, "%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); */// GX3 wrmsr(gating->msrnum, msr); // MSR - See the table above gating += 1; @@ -454,7 +454,7 @@ static void GeodeLinkPriority(void) msr.hi |= prio->msr.hi; msr.lo &= ~0xfff; msr.lo |= prio->msr.lo; - /* printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, + /* printk(BIOS_DEBUG, "%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); */// GX3 wrmsr(prio->msrnum, msr); // MSR - See the table above prio += 1; @@ -651,7 +651,7 @@ static void enable_L1_cache(void) // now program RCONF_DEFAULT wrmsr(CPU_RCONF_DEFAULT, msr); - printk_debug("CPU_RCONF_DEFAULT (1808): 0x%08X:0x%08X\n", msr.hi, + printk(BIOS_DEBUG, "CPU_RCONF_DEFAULT (1808): 0x%08X:0x%08X\n", msr.hi, msr.lo); // RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. @@ -663,7 +663,7 @@ static void enable_L1_cache(void) (msr.lo & 0xFFFF0000) | (SysMemCacheProp << 8) | SysMemCacheProp; wrmsr(CPU_RCONF_BYPASS, msr); - printk_debug("CPU_RCONF_BYPASS (180A): 0x%08x : 0x%08x\n", msr.hi, + printk(BIOS_DEBUG, "CPU_RCONF_BYPASS (180A): 0x%08x : 0x%08x\n", msr.hi, msr.lo); } @@ -695,7 +695,7 @@ static void enable_L2_cache(void) msr.lo = 0x0f; wrmsr(CPU_BC_L2_CONF, msr); - printk_debug("L2 cache enabled\n"); + printk(BIOS_DEBUG, "L2 cache enabled\n"); } static void setup_lx_cache(void) @@ -748,7 +748,7 @@ uint32_t get_systop(void) void northbridge_init_early(void) { int i; - printk_debug("Enter %s\n", __func__); + printk(BIOS_DEBUG, "Enter %s\n", __func__); for (i = 0; gliutables[i]; i++) GLIUInit(gliutables[i]); @@ -768,5 +768,5 @@ void northbridge_init_early(void) ClockGatingInit(); __asm__ __volatile__("FINIT\n"); - printk_debug("Exit %s\n", __func__); + printk(BIOS_DEBUG, "Exit %s\n", __func__); } diff --git a/src/northbridge/intel/e7501/debug.c b/src/northbridge/intel/e7501/debug.c index 75ed33ea40..cc82e2f60d 100644 --- a/src/northbridge/intel/e7501/debug.c +++ b/src/northbridge/intel/e7501/debug.c @@ -40,7 +40,7 @@ static void dump_pci_device(unsigned dev) unsigned char val; if ((i & 0x0f) == 0) { #if CONFIG_USE_INIT - printk_debug("\r\n%02x:",i); + printk(BIOS_DEBUG, "\r\n%02x:",i); #else print_debug("\r\n"); print_debug_hex8(i); @@ -49,7 +49,7 @@ static void dump_pci_device(unsigned dev) } val = pci_read_config8(dev, i); #if CONFIG_USE_INIT - printk_debug(" %02x", val); + printk(BIOS_DEBUG, " %02x", val); #else print_debug_char(' '); print_debug_hex8(val); @@ -102,7 +102,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl) if (device) { int j; #if CONFIG_USE_INIT - printk_debug("dimm: %02x.0: %02x", i, device); + printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device); #else print_debug("dimm: "); print_debug_hex8(i); @@ -114,7 +114,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl) unsigned char byte; if ((j & 0xf) == 0) { #if CONFIG_USE_INIT - printk_debug("\r\n%02x: ", j); + printk(BIOS_DEBUG, "\r\n%02x: ", j); #else print_debug("\r\n"); print_debug_hex8(j); @@ -127,7 +127,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl) } byte = status & 0xff; #if CONFIG_USE_INIT - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); #else print_debug_hex8(byte); print_debug_char(' '); @@ -139,7 +139,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl) if (device) { int j; #if CONFIG_USE_INIT - printk_debug("dimm: %02x.1: %02x", i, device); + printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device); #else` print_debug("dimm: "); print_debug_hex8(i); @@ -151,7 +151,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl) unsigned char byte; if ((j & 0xf) == 0) { #if CONFIG_USE_INIT - printk_debug("\r\n%02x: ", j); + printk(BIOS_DEBUG, "\r\n%02x: ", j); #else print_debug("\r\n"); print_debug_hex8(j); @@ -164,7 +164,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl) } byte = status & 0xff; #if CONFIG_USE_INIT - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); #else print_debug_hex8(byte); print_debug_char(' '); @@ -182,7 +182,7 @@ static void dump_smbus_registers(void) int j; if( smbus_read_byte(device, 0) < 0 ) continue; #if CONFIG_USE_INIT - printk_debug("smbus: %02x", device); + printk(BIOS_DEBUG, "smbus: %02x", device); #else print_debug("smbus: "); print_debug_hex8(device); @@ -196,7 +196,7 @@ static void dump_smbus_registers(void) } if ((j & 0xf) == 0) { #if CONFIG_USE_INIT - printk_debug("\r\n%02x: ",j); + printk(BIOS_DEBUG, "\r\n%02x: ",j); #else print_debug("\r\n"); print_debug_hex8(j); @@ -205,7 +205,7 @@ static void dump_smbus_registers(void) } byte = status & 0xff; #if CONFIG_USE_INIT - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); #else print_debug_hex8(byte); print_debug_char(' '); @@ -220,7 +220,7 @@ static void dump_io_resources(unsigned port) int i; #if CONFIG_USE_INIT - printk_debug("%04x:\r\n", port); + printk(BIOS_DEBUG, "%04x:\r\n", port); #else print_debug_hex16(port); print_debug(":\r\n"); @@ -229,7 +229,7 @@ static void dump_io_resources(unsigned port) uint8_t val; if ((i & 0x0f) == 0) { #if CONFIG_USE_INIT - printk_debug("%02x:", i); + printk(BIOS_DEBUG, "%02x:", i); #else print_debug_hex8(i); print_debug_char(':'); @@ -237,7 +237,7 @@ static void dump_io_resources(unsigned port) } val = inb(port); #if CONFIG_USE_INIT - printk_debug(" %02x",val); + printk(BIOS_DEBUG, " %02x",val); #else print_debug_char(' '); print_debug_hex8(val); @@ -256,7 +256,7 @@ static void dump_mem(unsigned start, unsigned end) for(i=start;i<end;i++) { if((i & 0xf)==0) { #if CONFIG_USE_INIT - printk_debug("\r\n%08x:", i); + printk(BIOS_DEBUG, "\r\n%08x:", i); #else print_debug("\r\n"); print_debug_hex32(i); @@ -264,7 +264,7 @@ static void dump_mem(unsigned start, unsigned end) #endif } #if CONFIG_USE_INIT - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); #else print_debug(" "); print_debug_hex8((unsigned char)*((unsigned char *)i)); diff --git a/src/northbridge/intel/e7520/northbridge.c b/src/northbridge/intel/e7520/northbridge.c index fd9b094469..efb7f0263b 100644 --- a/src/northbridge/intel/e7520/northbridge.c +++ b/src/northbridge/intel/e7520/northbridge.c @@ -65,7 +65,7 @@ static void pci_domain_set_resources(device_t dev) pci_tolm = find_pci_tolm(&dev->link[0]); #if 1 - printk_debug("PCI mem marker = %x\n", pci_tolm); + printk(BIOS_DEBUG, "PCI mem marker = %x\n", pci_tolm); #endif /* FIXME Me temporary hack */ if(pci_tolm > 0xe0000000) diff --git a/src/northbridge/intel/e7520/pciexp_porta.c b/src/northbridge/intel/e7520/pciexp_porta.c index 70e58076a7..07440e368e 100644 --- a/src/northbridge/intel/e7520/pciexp_porta.c +++ b/src/northbridge/intel/e7520/pciexp_porta.c @@ -30,12 +30,12 @@ static unsigned int pcie_scan_bridge(struct device *dev, unsigned int max) int flag = 0; do { val = pci_read_config16(dev, 0x76); - printk_debug("pcie porta 0x76: %02x\n", val); + printk(BIOS_DEBUG, "pcie porta 0x76: %02x\n", val); if((val & (1<<10) )&&(!flag)) { /* training error */ ctl = pci_read_config16(dev, 0x74); pci_write_config16(dev, 0x74, (ctl | (1<<5))); val = pci_read_config16(dev, 0x76); - printk_debug("pcie porta reset 0x76: %02x\n", val); + printk(BIOS_DEBUG, "pcie porta reset 0x76: %02x\n", val); flag=1; hard_reset(); } diff --git a/src/northbridge/intel/e7525/northbridge.c b/src/northbridge/intel/e7525/northbridge.c index 3c483a143b..02bf119b96 100644 --- a/src/northbridge/intel/e7525/northbridge.c +++ b/src/northbridge/intel/e7525/northbridge.c @@ -65,7 +65,7 @@ static void pci_domain_set_resources(device_t dev) pci_tolm = find_pci_tolm(&dev->link[0]); #if 1 - printk_debug("PCI mem marker = %x\n", pci_tolm); + printk(BIOS_DEBUG, "PCI mem marker = %x\n", pci_tolm); #endif /* FIXME Me temporary hack */ if(pci_tolm > 0xe0000000) diff --git a/src/northbridge/intel/i3100/northbridge.c b/src/northbridge/intel/i3100/northbridge.c index 0a04faf61a..195790f8cd 100644 --- a/src/northbridge/intel/i3100/northbridge.c +++ b/src/northbridge/intel/i3100/northbridge.c @@ -86,7 +86,7 @@ static void pci_domain_set_resources(device_t dev) pci_tolm = find_pci_tolm(&dev->link[0]); #if 1 - printk_debug("PCI mem marker = %x\n", pci_tolm); + printk(BIOS_DEBUG, "PCI mem marker = %x\n", pci_tolm); #endif /* FIXME Me temporary hack */ if(pci_tolm > 0xe0000000) diff --git a/src/northbridge/intel/i3100/pciexp_porta.c b/src/northbridge/intel/i3100/pciexp_porta.c index b94094ed17..df375ee5f7 100644 --- a/src/northbridge/intel/i3100/pciexp_porta.c +++ b/src/northbridge/intel/i3100/pciexp_porta.c @@ -52,12 +52,12 @@ static unsigned int pcie_scan_bridge(struct device *dev, unsigned int max) int flag = 0; do { val = pci_read_config16(dev, 0x76); - printk_debug("pcie porta 0x76: %02x\n", val); + printk(BIOS_DEBUG, "pcie porta 0x76: %02x\n", val); if ((val & (1<<10)) && (!flag)) { /* training error */ ctl = pci_read_config16(dev, 0x74); pci_write_config16(dev, 0x74, (ctl | (1<<5))); val = pci_read_config16(dev, 0x76); - printk_debug("pcie porta reset 0x76: %02x\n", val); + printk(BIOS_DEBUG, "pcie porta reset 0x76: %02x\n", val); flag=1; hard_reset(); } diff --git a/src/northbridge/intel/i3100/pciexp_porta_ep80579.c b/src/northbridge/intel/i3100/pciexp_porta_ep80579.c index d51227c0aa..aff287cb56 100644 --- a/src/northbridge/intel/i3100/pciexp_porta_ep80579.c +++ b/src/northbridge/intel/i3100/pciexp_porta_ep80579.c @@ -44,7 +44,7 @@ static void pcie_init(struct device *dev) pci_write_config32(dev, 0x3c, config->intrline); } - printk_spew("configure PCIe port as \"Slot Implemented\"\n"); + printk(BIOS_SPEW, "configure PCIe port as \"Slot Implemented\"\n"); val = pci_read_config16(dev, 0x66); val &= ~(1<<8); val |= 1<<8; @@ -58,7 +58,7 @@ static void pcie_bus_enable_resources(struct device *dev) { u8 val8; if (dev->link[0].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { - printk_spew("Enable VGA IO/MEM forwarding on PCIe port\n"); + printk(BIOS_SPEW, "Enable VGA IO/MEM forwarding on PCIe port\n"); pci_write_config8(dev, PCI_BRIDGE_CONTROL, 8); dev->command |= PCI_COMMAND_IO; @@ -76,12 +76,12 @@ static unsigned int pcie_scan_bridge(struct device *dev, unsigned int max) int flag = 0; do { val = pci_read_config16(dev, 0x76); - printk_debug("pcie porta 0x76: %02x\n", val); + printk(BIOS_DEBUG, "pcie porta 0x76: %02x\n", val); if ((val & (1<<11)) && (!flag)) { /* training error */ ctl = pci_read_config16(dev, 0x74); pci_write_config16(dev, 0x74, (ctl | (1<<5))); val = pci_read_config16(dev, 0x76); - printk_debug("pcie porta reset 0x76: %02x\n", val); + printk(BIOS_DEBUG, "pcie porta reset 0x76: %02x\n", val); flag=1; hard_reset(); } diff --git a/src/northbridge/intel/i440bx/debug.c b/src/northbridge/intel/i440bx/debug.c index 35ab611583..fab224dc85 100644 --- a/src/northbridge/intel/i440bx/debug.c +++ b/src/northbridge/intel/i440bx/debug.c @@ -39,25 +39,25 @@ void dump_spd_registers(void) { unsigned device; device = SMBUS_MEM_DEVICE_START; - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); while(device <= SMBUS_MEM_DEVICE_END) { int status = 0; int i; - printk_debug("dimm %02x", device); + printk(BIOS_DEBUG, "dimm %02x", device); for(i = 0; (i < 256) && (status == 0); i++) { unsigned char byte; if ((i % 20) == 0) { - printk_debug("\n%3d: ", i); + printk(BIOS_DEBUG, "\n%3d: ", i); } status = smbus_read_byte(device, i, &byte); if (status != 0) { - printk_debug("bad device\n"); + printk(BIOS_DEBUG, "bad device\n"); continue; } - printk_debug("%02x ", byte); + printk(BIOS_DEBUG, "%02x ", byte); } device += SMBUS_MEM_DEVICE_INC; - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } } #endif diff --git a/src/northbridge/intel/i440bx/northbridge.c b/src/northbridge/intel/i440bx/northbridge.c index 4431aafaf8..772ab1c8f3 100644 --- a/src/northbridge/intel/i440bx/northbridge.c +++ b/src/northbridge/intel/i440bx/northbridge.c @@ -15,7 +15,7 @@ static void northbridge_init(device_t dev) { - printk_spew("Northbridge Init\n"); + printk(BIOS_SPEW, "Northbridge Init\n"); } static struct device_operations northbridge_operations = { @@ -97,7 +97,7 @@ static void i440bx_domain_set_resources(device_t dev) /* Convert to KB. */ tomk *= (8 * 1024); - printk_debug("Setting RAM size to %ld MB\n", tomk / 1024); + printk(BIOS_DEBUG, "Setting RAM size to %ld MB\n", tomk / 1024); /* Compute the top of low memory. */ tolmk = pci_tolm / 1024; diff --git a/src/northbridge/intel/i440lx/northbridge.c b/src/northbridge/intel/i440lx/northbridge.c index 41cc43bbc4..ebe38afd51 100644 --- a/src/northbridge/intel/i440lx/northbridge.c +++ b/src/northbridge/intel/i440lx/northbridge.c @@ -43,7 +43,7 @@ */ static void northbridge_init(device_t dev) { - printk_spew("Northbridge Init\n"); + printk(BIOS_SPEW, "Northbridge Init\n"); } static struct device_operations northbridge_operations = { @@ -125,7 +125,7 @@ static void i440lx_domain_set_resources(device_t dev) /* Convert to KB. */ tomk *= (8 * 1024); - printk_debug("Setting RAM size to %lu MB\n", tomk / 1024); + printk(BIOS_DEBUG, "Setting RAM size to %lu MB\n", tomk / 1024); /* Compute the top of low memory. */ tolmk = pci_tolm / 1024; diff --git a/src/northbridge/intel/i440lx/raminit.c b/src/northbridge/intel/i440lx/raminit.c index 4c171ef92d..5d07441dde 100644 --- a/src/northbridge/intel/i440lx/raminit.c +++ b/src/northbridge/intel/i440lx/raminit.c @@ -244,7 +244,7 @@ static void sdram_set_registers(void) #if 0 uint16_t reg16; reg16 = pci_read_config16(NB, PACCFG); - printk_debug("i82443LX Host Freq: 6%C MHz\r\n", (reg16 & 0x4000) ? '0' : '6'); + printk(BIOS_DEBUG, "i82443LX Host Freq: 6%C MHz\r\n", (reg16 & 0x4000) ? '0' : '6'); #endif PRINT_DEBUG("Northbridge prior to SDRAM init:\r\n"); diff --git a/src/northbridge/intel/i82810/northbridge.c b/src/northbridge/intel/i82810/northbridge.c index 2129c1b6af..23e7acffbd 100644 --- a/src/northbridge/intel/i82810/northbridge.c +++ b/src/northbridge/intel/i82810/northbridge.c @@ -34,7 +34,7 @@ static void northbridge_init(device_t dev) { - printk_spew("Northbridge init\n"); + printk(BIOS_SPEW, "Northbridge init\n"); } static struct device_operations northbridge_operations = { @@ -142,7 +142,7 @@ static void pci_domain_set_resources(device_t dev) drp_value = drp_value >> 4; // >>= 4; //? mess with later tomk += (unsigned long)(translate_i82810_to_mb[drp_value]); - printk_debug("Setting RAM size to %d MB\n", tomk); + printk(BIOS_DEBUG, "Setting RAM size to %d MB\n", tomk); /* Convert tomk from MB to KB. */ tomk = tomk << 10; @@ -151,12 +151,12 @@ static void pci_domain_set_resources(device_t dev) /* Check for VGA reserved memory. */ if (CONFIG_VIDEO_MB == 512) { tomk -= 512; - printk_debug("Allocating %s RAM for VGA\n", "512KB"); + printk(BIOS_DEBUG, "Allocating %s RAM for VGA\n", "512KB"); } else if (CONFIG_VIDEO_MB == 1) { tomk -= 1024 ; - printk_debug("Allocating %s RAM for VGA\n", "1MB"); + printk(BIOS_DEBUG, "Allocating %s RAM for VGA\n", "1MB"); } else { - printk_debug("Allocating %s RAM for VGA\n", "0MB"); + printk(BIOS_DEBUG, "Allocating %s RAM for VGA\n", "0MB"); } #endif diff --git a/src/northbridge/intel/i82830/i82830_smihandler.c b/src/northbridge/intel/i82830/i82830_smihandler.c index 1c45927a86..e53d283b4b 100644 --- a/src/northbridge/intel/i82830/i82830_smihandler.c +++ b/src/northbridge/intel/i82830/i82830_smihandler.c @@ -80,17 +80,17 @@ typedef struct { static void dump(u8 * addr, u32 len) { - printk_debug("\n%s(%p, %x):\n", __func__, addr, len); + printk(BIOS_DEBUG, "\n%s(%p, %x):\n", __func__, addr, len); while (len) { unsigned int tmpCnt = len; unsigned char x; if (tmpCnt > 8) tmpCnt = 8; - printk_debug("\n%p: ", addr); + printk(BIOS_DEBUG, "\n%p: ", addr); // print hex while (tmpCnt--) { x = *addr++; - printk_debug("%02x ", x); + printk(BIOS_DEBUG, "%02x ", x); } tmpCnt = len; if (tmpCnt > 8) @@ -105,10 +105,10 @@ dump(u8 * addr, u32 len) //non-printable char x = '.'; } - printk_debug("%c", x); + printk(BIOS_DEBUG, "%c", x); } } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } #endif @@ -150,19 +150,19 @@ typedef struct { static void mbi_call(u8 subf, banner_id_t *banner_id) { #ifdef DEBUG_SMI_I82830 - printk_debug("MBI\n"); - printk_debug("|- sub function %x\n", subf); - printk_debug("|- banner id @ %x\n", (u32)banner_id); - printk_debug("| |- mhid %x\n", banner_id->mhid); - printk_debug("| |- function %x\n", banner_id->function); - printk_debug("| |- return status %x\n", banner_id->retsts); - printk_debug("| |- rfu %x\n", banner_id->rfu); + printk(BIOS_DEBUG, "MBI\n"); + printk(BIOS_DEBUG, "|- sub function %x\n", subf); + printk(BIOS_DEBUG, "|- banner id @ %x\n", (u32)banner_id); + printk(BIOS_DEBUG, "| |- mhid %x\n", banner_id->mhid); + printk(BIOS_DEBUG, "| |- function %x\n", banner_id->function); + printk(BIOS_DEBUG, "| |- return status %x\n", banner_id->retsts); + printk(BIOS_DEBUG, "| |- rfu %x\n", banner_id->rfu); #endif switch(banner_id->function) { case 0x0001: { version_t *version; - printk_debug("|- MBI_QueryInterface\n"); + printk(BIOS_DEBUG, "|- MBI_QueryInterface\n"); version = (version_t *)banner_id; version->banner.retsts = MSH_OK; version->versionmajor=1; @@ -171,18 +171,18 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) break; } case 0x0002: - printk_debug("|- MBI_Attach\n"); - printk_debug("| |- Not Implemented!\n"); + printk(BIOS_DEBUG, "|- MBI_Attach\n"); + printk(BIOS_DEBUG, "| |- Not Implemented!\n"); break; case 0x0003: - printk_debug("|- MBI_Detach\n"); - printk_debug("| |- Not Implemented!\n"); + printk(BIOS_DEBUG, "|- MBI_Detach\n"); + printk(BIOS_DEBUG, "| |- Not Implemented!\n"); break; case 0x0201: { obj_header_t *obj_header = (obj_header_t *)banner_id; mbi_header_t *mbi_header = NULL; - printk_debug("|- MBI_GetObjectHeader\n"); - printk_debug("| |- objnum = %d\n", obj_header->objnum); + printk(BIOS_DEBUG, "|- MBI_GetObjectHeader\n"); + printk(BIOS_DEBUG, "| |- objnum = %d\n", obj_header->objnum); int i, count=0; obj_header->banner.retsts = MSH_IF_NOT_FOUND; @@ -201,15 +201,15 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) if (obj_header->objnum == count) { int headerlen = ALIGN(sizeof(mbi_header) + mbi_header->name_len + 15, 16); #ifdef DEBUG_SMI_I82830 - printk_debug("| |- headerlen = %d\n", headerlen); + printk(BIOS_DEBUG, "| |- headerlen = %d\n", headerlen); #endif memcpy(&obj_header->header, mbi_header, headerlen); obj_header->banner.retsts = MSH_OK; - printk_debug("| |- MBI module '"); + printk(BIOS_DEBUG, "| |- MBI module '"); int j; for (j=0; j < mbi_header->name_len && mbi_header->name[j]; j++) - printk_debug("%c", mbi_header->name[j]); - printk_debug("' found.\n"); + printk(BIOS_DEBUG, "%c", mbi_header->name[j]); + printk(BIOS_DEBUG, "' found.\n"); #ifdef DEBUG_SMI_I82830 dump(banner_id, sizeof(obj_header_t) + 16); #endif @@ -219,21 +219,21 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) count++; } if (obj_header->banner.retsts == MSH_IF_NOT_FOUND) - printk_debug("| |- MBI object #%d not found.\n", obj_header->objnum); + printk(BIOS_DEBUG, "| |- MBI object #%d not found.\n", obj_header->objnum); break; } case 0x0203: { get_object_t *getobj = (get_object_t *)banner_id; mbi_header_t *mbi_header = NULL; - printk_debug("|- MBI_GetObject\n"); + printk(BIOS_DEBUG, "|- MBI_GetObject\n"); #ifdef DEBUG_SMI_I82830 - printk_debug("| |- handle = %016lx\n", getobj->handle); + printk(BIOS_DEBUG, "| |- handle = %016lx\n", getobj->handle); #endif - printk_debug("| |- objnum = %d\n", getobj->objnum); - printk_debug("| |- start = %x\n", getobj->start); - printk_debug("| |- numbytes = %x\n", getobj->numbytes); - printk_debug("| |- buflen = %x\n", getobj->buflen); - printk_debug("| |- buffer = %x\n", getobj->buffer); + printk(BIOS_DEBUG, "| |- objnum = %d\n", getobj->objnum); + printk(BIOS_DEBUG, "| |- start = %x\n", getobj->start); + printk(BIOS_DEBUG, "| |- numbytes = %x\n", getobj->numbytes); + printk(BIOS_DEBUG, "| |- buflen = %x\n", getobj->buflen); + printk(BIOS_DEBUG, "| |- buffer = %x\n", getobj->buffer); int i, count=0; getobj->banner.retsts = MSH_IF_NOT_FOUND; @@ -250,7 +250,7 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) len = ALIGN((mbi_header->size * 16) + sizeof(mbi_header) + mbi_header->name_len, 16); if (getobj->objnum == count) { - printk_debug("| |- len = %x\n", len); + printk(BIOS_DEBUG, "| |- len = %x\n", len); memcpy((void *)(getobj->buffer + OBJ_OFFSET), ((char *)mbi_header) + 0x20 , (len > getobj->buflen ? getobj->buflen : len)); @@ -264,15 +264,15 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) count++; } if (getobj->banner.retsts == MSH_IF_NOT_FOUND) - printk_debug("MBI module %d not found.\n", getobj->objnum); + printk(BIOS_DEBUG, "MBI module %d not found.\n", getobj->objnum); break; } default: - printk_debug("|- function %x\n", banner_id->function); - printk_debug("| |- Unknown Function!\n"); + printk(BIOS_DEBUG, "|- function %x\n", banner_id->function); + printk(BIOS_DEBUG, "| |- Unknown Function!\n"); break; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); //dump(banner_id, 0x20); } @@ -291,7 +291,7 @@ static void smi_interface_call(void) { u32 mmio = pci_read_config32(PCI_DEV(0, 0x02, 0), 0x14); // mmio &= 0xfff80000; - // printk_debug("mmio=%x\n", mmio); + // printk(BIOS_DEBUG, "mmio=%x\n", mmio); u16 swsmi = pci_read_config16(PCI_DEV(0, 0x02, 0), 0xe0); if (!(swsmi & 1)) @@ -301,7 +301,7 @@ static void smi_interface_call(void) switch ((swsmi>>1) & 0xf) { case 0: - printk_debug("Interface Function Presence Test.\n"); + printk(BIOS_DEBUG, "Interface Function Presence Test.\n"); swsmi = 0; swsmi &= ~(7 << 5); // Exit: Result swsmi |= (SMI_IFC_SUCCESS << 5); @@ -312,11 +312,11 @@ static void smi_interface_call(void) write32(mmio + 0x71428, 0x494e5443); return; case 4: - printk_debug("Get BIOS Data.\n"); - printk_debug("swsmi=%04x\n", swsmi); + printk(BIOS_DEBUG, "Get BIOS Data.\n"); + printk(BIOS_DEBUG, "swsmi=%04x\n", swsmi); break; case 5: - printk_debug("Call MBI Functions.\n"); + printk(BIOS_DEBUG, "Call MBI Functions.\n"); mbi_call(swsmi >> 8, (banner_id_t *)((read32(mmio + 0x71428) & 0x000fffff) + OBJ_OFFSET) ); // swsmi = 0x0000; swsmi &= ~(7 << 5); // Exit: Result @@ -324,11 +324,11 @@ static void smi_interface_call(void) pci_write_config16(PCI_DEV(0, 0x02, 0), 0xe0, swsmi); return; case 6: - printk_debug("System BIOS Callbacks.\n"); - printk_debug("swsmi=%04x\n", swsmi); + printk(BIOS_DEBUG, "System BIOS Callbacks.\n"); + printk(BIOS_DEBUG, "swsmi=%04x\n", swsmi); break; default: - printk_debug("Unknown SMI interface call %04x\n", swsmi); + printk(BIOS_DEBUG, "Unknown SMI interface call %04x\n", swsmi); break; } @@ -354,15 +354,15 @@ static u16 reset_err_status(void) static void dump_err_status(u32 errsts) { - printk_debug("ERRSTS: "); - if (errsts & (1 << 12)) printk_debug("MBI "); - if (errsts & (1 << 9)) printk_debug("LCKF "); - if (errsts & (1 << 8)) printk_debug("DTF "); - if (errsts & (1 << 5)) printk_debug("UNSC "); - if (errsts & (1 << 4)) printk_debug("OOGF "); - if (errsts & (1 << 3)) printk_debug("IAAF "); - if (errsts & (1 << 2)) printk_debug("ITTEF "); - printk_debug("\n"); + printk(BIOS_DEBUG, "ERRSTS: "); + if (errsts & (1 << 12)) printk(BIOS_DEBUG, "MBI "); + if (errsts & (1 << 9)) printk(BIOS_DEBUG, "LCKF "); + if (errsts & (1 << 8)) printk(BIOS_DEBUG, "DTF "); + if (errsts & (1 << 5)) printk(BIOS_DEBUG, "UNSC "); + if (errsts & (1 << 4)) printk(BIOS_DEBUG, "OOGF "); + if (errsts & (1 << 3)) printk(BIOS_DEBUG, "IAAF "); + if (errsts & (1 << 2)) printk(BIOS_DEBUG, "ITTEF "); + printk(BIOS_DEBUG, "\n"); } void northbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save) diff --git a/src/northbridge/intel/i82830/northbridge.c b/src/northbridge/intel/i82830/northbridge.c index da76a5d89b..5cd13b7033 100644 --- a/src/northbridge/intel/i82830/northbridge.c +++ b/src/northbridge/intel/i82830/northbridge.c @@ -35,7 +35,7 @@ static void northbridge_init(device_t dev) { - printk_spew("Northbridge init\n"); + printk(BIOS_SPEW, "Northbridge init\n"); } static struct device_operations northbridge_operations = { @@ -95,7 +95,7 @@ uint64_t uma_memory_base=0, uma_memory_size=0; int add_northbridge_resources(struct lb_memory *mem) { - printk_debug("Adding IGD UMA memory area\n"); + printk(BIOS_DEBUG, "Adding IGD UMA memory area\n"); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); @@ -120,10 +120,10 @@ static void pci_domain_set_resources(device_t dev) if (CONFIG_VIDEO_MB == 512) { igd_memory = (CONFIG_VIDEO_MB); - printk_debug("%dKB IGD UMA\n", igd_memory >> 10); + printk(BIOS_DEBUG, "%dKB IGD UMA\n", igd_memory >> 10); } else { igd_memory = (CONFIG_VIDEO_MB * 1024); - printk_debug("%dMB IGD UMA\n", igd_memory >> 10); + printk(BIOS_DEBUG, "%dMB IGD UMA\n", igd_memory >> 10); } /* Get the value of the highest DRB. This tells the end of @@ -136,7 +136,7 @@ static void pci_domain_set_resources(device_t dev) /* For reserving UMA memory in the memory map */ uma_memory_base = tomk * 1024ULL; uma_memory_size = igd_memory * 1024ULL; - printk_debug("Available memory: %ldKB\n", tomk); + printk(BIOS_DEBUG, "Available memory: %ldKB\n", tomk); /* Compute the top of low memory. */ tolmk = pci_tolm >> 10; diff --git a/src/northbridge/intel/i82830/vga.c b/src/northbridge/intel/i82830/vga.c index ccab697a89..37c967414b 100644 --- a/src/northbridge/intel/i82830/vga.c +++ b/src/northbridge/intel/i82830/vga.c @@ -31,21 +31,21 @@ static void vga_init(device_t dev) { - printk_info("Starting Graphics Initialization\n"); + printk(BIOS_INFO, "Starting Graphics Initialization\n"); struct cbfs_file *file = cbfs_find("mbi.bin"); void *mbi = NULL; unsigned int mbi_len = 0; if (file) { if (ntohl(file->type) != CBFS_TYPE_MBI) { - printk_info( "CBFS: MBI binary is of type %x instead of" + printk(BIOS_INFO, "CBFS: MBI binary is of type %x instead of" "type %x\n", file->type, CBFS_TYPE_MBI); } else { mbi = (void *) CBFS_SUBHEADER(file); mbi_len = file->len; } } else { - printk_info( "Could not find MBI.\n"); + printk(BIOS_INFO, "Could not find MBI.\n"); } if (mbi && mbi_len) { @@ -59,7 +59,7 @@ static void vga_init(device_t dev) } pci_dev_init(dev); - printk_info("Graphics Initialization Complete\n"); + printk(BIOS_INFO, "Graphics Initialization Complete\n"); /* Enable TV-Out */ #if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL @@ -68,7 +68,7 @@ static void vga_init(device_t dev) #define PIPE_A_TV (1 << 3) #define PIPE_B_CRT (1 << 8) #define PIPE_B_TV (1 << 10) - printk_debug("Enabling TV-Out\n"); + printk(BIOS_DEBUG, "Enabling TV-Out\n"); void runInt10(void); M.x86.R_AX = 0x5f64; M.x86.R_BX = 0x0001; // Set Display Device, force execution @@ -77,13 +77,13 @@ static void vga_init(device_t dev) runInt10(); switch (M.x86.R_AX) { case 0x005f: - printk_debug("... failed.\n"); + printk(BIOS_DEBUG, "... failed.\n"); break; case 0x015f: - printk_debug("... ok.\n"); + printk(BIOS_DEBUG, "... ok.\n"); break; default: - printk_debug("... not supported.\n"); + printk(BIOS_DEBUG, "... not supported.\n"); break; } #endif diff --git a/src/northbridge/intel/i855/northbridge.c b/src/northbridge/intel/i855/northbridge.c index e33338ec66..8587754fc1 100644 --- a/src/northbridge/intel/i855/northbridge.c +++ b/src/northbridge/intel/i855/northbridge.c @@ -79,13 +79,13 @@ static void pci_domain_set_resources(device_t dev) device_t mc_dev; uint32_t pci_tolm; - printk_debug("Entered with dev vid = %x\n", dev->vendor); - printk_debug("Entered with dev did = %x\n", dev->device); + printk(BIOS_DEBUG, "Entered with dev vid = %x\n", dev->vendor); + printk(BIOS_DEBUG, "Entered with dev did = %x\n", dev->device); pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children->sibling; - printk_debug("MC dev vendor = %x\n", mc_dev->vendor); - printk_debug("MC dev device = %x\n", mc_dev->device); + printk(BIOS_DEBUG, "MC dev vendor = %x\n", mc_dev->vendor); + printk(BIOS_DEBUG, "MC dev device = %x\n", mc_dev->device); if (mc_dev) { /* Figure out which areas are/should be occupied by RAM. @@ -120,8 +120,8 @@ static void pci_domain_set_resources(device_t dev) */ /* Report the memory regions */ - printk_debug("tomk = %d\n", tomk); - printk_debug("tolmk = %d\n", tolmk); + printk(BIOS_DEBUG, "tomk = %d\n", tomk); + printk(BIOS_DEBUG, "tolmk = %d\n", tolmk); idx = 10; /* avoid pam region */ diff --git a/src/northbridge/intel/i945/debug.c b/src/northbridge/intel/i945/debug.c index 4a59fee372..a14d0cec63 100644 --- a/src/northbridge/intel/i945/debug.c +++ b/src/northbridge/intel/i945/debug.c @@ -36,9 +36,9 @@ static void print_pci_devices(void) (((id >> 16) & 0xffff) == 0x0000)) { continue; } - printk_debug("PCI: %02x:%02x.%02x", (dev >> 20) & 0xff, + printk(BIOS_DEBUG, "PCI: %02x:%02x.%02x", (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 7); - printk_debug(" [%04x:%04x]\n", id &0xffff, id >> 16); + printk(BIOS_DEBUG, " [%04x:%04x]\n", id &0xffff, id >> 16); } } @@ -46,17 +46,17 @@ static void dump_pci_device(unsigned dev) { int i; - printk_debug("PCI: %02x:%02x.%02x\n", (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 7); + printk(BIOS_DEBUG, "PCI: %02x:%02x.%02x\n", (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 7); for(i = 0; i <= 255; i++) { unsigned char val; if ((i & 0x0f) == 0) { - printk_debug("%02x:", i); + printk(BIOS_DEBUG, "%02x:", i); } val = pci_read_config8(dev, i); - printk_debug(" %02x", val); + printk(BIOS_DEBUG, " %02x", val); if ((i & 0x0f) == 0x0f) { - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } } } @@ -85,21 +85,21 @@ void dump_spd_registers(void) while(device <= SMBUS_MEM_DEVICE_END) { int status = 0; int i; - printk_debug("\ndimm %02x", device); + printk(BIOS_DEBUG, "\ndimm %02x", device); for(i = 0; (i < 256) ; i++) { if ((i % 16) == 0) { - printk_debug("\n%02x: ", i); + printk(BIOS_DEBUG, "\n%02x: ", i); } status = smbus_read_byte(device, i); if (status < 0) { - printk_debug("bad device: %02x\n", -status); + printk(BIOS_DEBUG, "bad device: %02x\n", -status); break; } - printk_debug("%02x ", status); + printk(BIOS_DEBUG, "%02x ", status); } device += SMBUS_MEM_DEVICE_INC; - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } } @@ -109,9 +109,9 @@ static void dump_mem(unsigned start, unsigned end) print_debug("dump_mem:"); for(i=start;i<end;i++) { if((i & 0xf)==0) { - printk_debug("\n%08x:", i); + printk(BIOS_DEBUG, "\n%08x:", i); } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); } print_debug("\n"); } diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index d16f77a349..f6cdcca961 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -29,108 +29,108 @@ static void i945m_detect_chipset(void) { u8 reg8; - printk_info("\n"); + printk(BIOS_INFO, "\n"); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe7) & 0x70) >> 4; switch (reg8) { case 1: - printk_info("Mobile Intel(R) 82945GM/GME Express"); + printk(BIOS_INFO, "Mobile Intel(R) 82945GM/GME Express"); break; case 2: - printk_info("Mobile Intel(R) 82945GMS/GU Express"); + printk(BIOS_INFO, "Mobile Intel(R) 82945GMS/GU Express"); break; case 3: - printk_info("Mobile Intel(R) 82945PM Express"); + printk(BIOS_INFO, "Mobile Intel(R) 82945PM Express"); break; case 5: - printk_info("Intel(R) 82945GT Express"); + printk(BIOS_INFO, "Intel(R) 82945GT Express"); break; case 6: - printk_info("Mobile Intel(R) 82943/82940GML Express"); + printk(BIOS_INFO, "Mobile Intel(R) 82943/82940GML Express"); break; default: - printk_info("Unknown (%02x)", reg8); /* Others reserved. */ + printk(BIOS_INFO, "Unknown (%02x)", reg8); /* Others reserved. */ } - printk_info(" Chipset\n"); + printk(BIOS_INFO, " Chipset\n"); - printk_debug("(G)MCH capable of up to FSB "); + printk(BIOS_DEBUG, "(G)MCH capable of up to FSB "); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe3) & 0xe0) >> 5; switch (reg8) { case 2: - printk_debug("800 MHz"); /* According to 965 spec */ + printk(BIOS_DEBUG, "800 MHz"); /* According to 965 spec */ break; case 3: - printk_debug("667 MHz"); + printk(BIOS_DEBUG, "667 MHz"); break; case 4: - printk_debug("533 MHz"); + printk(BIOS_DEBUG, "533 MHz"); break; default: - printk_debug("N/A MHz (%02x)", reg8); + printk(BIOS_DEBUG, "N/A MHz (%02x)", reg8); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); - printk_debug("(G)MCH capable of "); + printk(BIOS_DEBUG, "(G)MCH capable of "); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe4) & 0x07); switch (reg8) { case 2: - printk_debug("up to DDR2-667"); + printk(BIOS_DEBUG, "up to DDR2-667"); break; case 3: - printk_debug("up to DDR2-533"); + printk(BIOS_DEBUG, "up to DDR2-533"); break; case 4: - printk_debug("DDR2-400"); + printk(BIOS_DEBUG, "DDR2-400"); break; default: - printk_info("unknown max. RAM clock (%02x).", reg8); /* Others reserved. */ + printk(BIOS_INFO, "unknown max. RAM clock (%02x).", reg8); /* Others reserved. */ } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } static void i945_detect_chipset(void) { u8 reg8; - printk_info("\nIntel(R) "); + printk(BIOS_INFO, "\nIntel(R) "); reg8 = ((pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe7) >> 5) & 4) | ((pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe4) >> 4) & 3); switch (reg8) { case 0: case 1: - printk_info("82945G"); + printk(BIOS_INFO, "82945G"); break; case 2: case 3: - printk_info("82945P"); + printk(BIOS_INFO, "82945P"); break; case 4: - printk_info("82945GC"); + printk(BIOS_INFO, "82945GC"); break; case 5: - printk_info("82945GZ"); + printk(BIOS_INFO, "82945GZ"); break; case 6: case 7: - printk_info("82945PL"); + printk(BIOS_INFO, "82945PL"); break; default: break; } - printk_info(" Chipset\n"); + printk(BIOS_INFO, " Chipset\n"); - printk_debug("(G)MCH capable of "); + printk(BIOS_DEBUG, "(G)MCH capable of "); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe4) & 0x07); switch (reg8) { case 0: - printk_debug("up to DDR2-667"); + printk(BIOS_DEBUG, "up to DDR2-667"); break; case 3: - printk_debug("up to DDR2-533"); + printk(BIOS_DEBUG, "up to DDR2-533"); break; default: - printk_info("unknown max. RAM clock (%02x).", reg8); /* Others reserved. */ + printk(BIOS_INFO, "unknown max. RAM clock (%02x).", reg8); /* Others reserved. */ } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } static void i945_setup_bars(void) @@ -139,11 +139,10 @@ static void i945_setup_bars(void) /* As of now, we don't have all the A0 workarounds implemented */ if (i945_silicon_revision() == 0) - printk_info - ("Warning: i945 silicon revision A0 might not work correctly.\n"); + printk(BIOS_INFO, "Warning: i945 silicon revision A0 might not work correctly.\n"); /* Setting up Southbridge. In the northbridge code. */ - printk_debug("Setting up static southbridge registers..."); + printk(BIOS_DEBUG, "Setting up static southbridge registers..."); pci_write_config32(PCI_DEV(0, 0x1f, 0), RCBA, DEFAULT_RCBA | 1); pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1); @@ -152,14 +151,14 @@ static void i945_setup_bars(void) pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); /* Enable GPIOs */ setup_ich7_gpios(); - printk_debug(" done.\n"); + printk(BIOS_DEBUG, " done.\n"); - printk_debug("Disabling Watchdog reboot..."); + printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); RCBA32(GCS) = (RCBA32(0x3410)) | (1 << 5); /* No reset */ outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ - printk_debug(" done.\n"); + printk(BIOS_DEBUG, " done.\n"); - printk_debug("Setting up static northbridge registers..."); + printk(BIOS_DEBUG, "Setting up static northbridge registers..."); /* Set up all hardcoded northbridge BARs */ pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, DEFAULT_EPBAR | 1); pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, DEFAULT_MCHBAR | 1); @@ -182,16 +181,16 @@ static void i945_setup_bars(void) pci_write_config8(PCI_DEV(0, 0x00, 0), PAM6, 0x33); pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); - printk_debug(" done.\n"); + printk(BIOS_DEBUG, " done.\n"); /* Wait for MCH BAR to come up */ - printk_debug("Waiting for MCHBAR to come up..."); + printk(BIOS_DEBUG, "Waiting for MCHBAR to come up..."); if ((pci_read_config8(PCI_DEV(0, 0x0f, 0), 0xe6) & 0x2) == 0x00) { /* Bit 49 of CAPID0 */ do { reg8 = *(volatile u8 *)0xfed40000; } while (!(reg8 & 0x80)); } - printk_debug("ok\n"); + printk(BIOS_DEBUG, "ok\n"); } static void i945_setup_egress_port(void) @@ -199,7 +198,7 @@ static void i945_setup_egress_port(void) u32 reg32; u32 timeout; - printk_debug("Setting up Egress Port RCRB\n"); + printk(BIOS_DEBUG, "Setting up Egress Port RCRB\n"); /* Egress Port Virtual Channel 0 Configuration */ @@ -267,26 +266,26 @@ static void i945_setup_egress_port(void) EPBAR32(EPVC1RCTL) |= (1 << 16); EPBAR32(EPVC1RCTL) |= (1 << 16); - printk_debug("Loading port arbitration table ..."); + printk(BIOS_DEBUG, "Loading port arbitration table ..."); /* Loop until bit 0 becomes 0 */ timeout = 0x7fffff; while ((EPBAR16(EPVC1RSTS) & 1) && --timeout) ; if (!timeout) - printk_debug("timeout!\n"); + printk(BIOS_DEBUG, "timeout!\n"); else - printk_debug("ok\n"); + printk(BIOS_DEBUG, "ok\n"); /* Now enable VC1 */ EPBAR32(EPVC1RCTL) |= (1 << 31); - printk_debug("Wait for VC1 negotiation ..."); + printk(BIOS_DEBUG, "Wait for VC1 negotiation ..."); /* Wait for VC1 negotiation pending */ timeout = 0x7fff; while ((EPBAR16(EPVC1RSTS) & (1 << 1)) && --timeout) ; if (!timeout) - printk_debug("timeout!\n"); + printk(BIOS_DEBUG, "timeout!\n"); else - printk_debug("ok\n"); + printk(BIOS_DEBUG, "ok\n"); } @@ -348,7 +347,7 @@ static void i945_setup_dmi_rcrb(void) int activate_aspm = 1; - printk_debug("Setting up DMI RCRB\n"); + printk(BIOS_DEBUG, "Setting up DMI RCRB\n"); /* Virtual Channel 0 Configuration */ reg32 = DMIBAR32(DMIVC0RCTL0); @@ -373,14 +372,14 @@ static void i945_setup_dmi_rcrb(void) /* Now enable VC1 */ DMIBAR32(DMIVC1RCTL) |= (1 << 31); - printk_debug("Wait for VC1 negotiation ..."); + printk(BIOS_DEBUG, "Wait for VC1 negotiation ..."); /* Wait for VC1 negotiation pending */ timeout = 0x7ffff; while ((DMIBAR16(DMIVC1RSTS) & (1 << 1)) && --timeout) ; if (!timeout) - printk_debug("timeout!\n"); + printk(BIOS_DEBUG, "timeout!\n"); else - printk_debug("done..\n"); + printk(BIOS_DEBUG, "done..\n"); #if 1 /* Enable Active State Power Management (ASPM) L0 state */ @@ -425,10 +424,10 @@ static void i945_setup_dmi_rcrb(void) DMIBAR32(0x204) = reg32; if (pci_read_config8(PCI_DEV(0, 0x0, 0), 0x54) & ((1 << 4) | (1 << 3))) { /* DEVEN */ - printk_debug("Internal graphics: enabled\n"); + printk(BIOS_DEBUG, "Internal graphics: enabled\n"); DMIBAR32(0x200) |= (1 << 21); } else { - printk_debug("Internal graphics: disabled\n"); + printk(BIOS_DEBUG, "Internal graphics: disabled\n"); DMIBAR32(0x200) &= ~(1 << 21); } @@ -474,13 +473,13 @@ static void i945_setup_dmi_rcrb(void) } /* wait for bit toggle to 0 */ - printk_debug("Waiting for DMI hardware..."); + printk(BIOS_DEBUG, "Waiting for DMI hardware..."); timeout = 0x7fffff; while ((DMIBAR8(0x32) & (1 << 1)) && --timeout) ; if (!timeout) - printk_debug("timeout!\n"); + printk(BIOS_DEBUG, "timeout!\n"); else - printk_debug("ok\n"); + printk(BIOS_DEBUG, "ok\n"); DMIBAR32(0x1c4) = 0xffffffff; DMIBAR32(0x1d0) = 0xffffffff; @@ -495,8 +494,7 @@ static void i945_setup_dmi_rcrb(void) if (i945_silicon_revision() == 1 && ((MCHBAR8(0xe08) & (1 << 5)) == 1)) { if ((MCHBAR32(0x214) & 0xf) != 0x3) { - printk_info - ("DMI link requires A1 stepping workaround. Rebooting.\n"); + printk(BIOS_INFO, "DMI link requires A1 stepping workaround. Rebooting.\n"); reg32 = DMIBAR32(0x224); reg32 &= ~(7 << 0); reg32 |= (3 << 0); @@ -515,7 +513,7 @@ static void i945_setup_pci_express_x16(void) u8 reg8; - printk_debug("Enabling PCI Express x16 Link\n"); + printk(BIOS_DEBUG, "Enabling PCI Express x16 Link\n"); reg16 = pci_read_config16(PCI_DEV(0, 0x00, 0), DEVEN); reg16 |= DEVEN_D1F0; @@ -540,7 +538,7 @@ static void i945_setup_pci_express_x16(void) pci_write_config16(PCI_DEV(0, 0x01, 0), 0x3e, reg16); reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0xba); - printk_debug("SLOTSTS: %04x\n", reg16); + printk(BIOS_DEBUG, "SLOTSTS: %04x\n", reg16); if (!(reg16 & 0x48)) { goto disable_pciexpress_x16_link; } @@ -576,18 +574,18 @@ static void i945_setup_pci_express_x16(void) pcie_write_config32(PCI_DEV(0, 0x01, 0), 0xb4, reg32); /* Wait for training to succeed */ - printk_debug("PCIe link training ..."); + printk(BIOS_DEBUG, "PCIe link training ..."); timeout = 0x7ffff; while ((((pcie_read_config32(PCI_DEV(0, 0x01, 0), 0x214) >> 16) & 4) != 3) && --timeout) ; reg32 = pci_read_config32(PCI_DEV(0x0a, 0x0, 0), 0); if (reg32 != 0x00000000 && reg32 != 0xffffffff) { - printk_debug(" Detected PCIe device %04x:%04x\n", + printk(BIOS_DEBUG, " Detected PCIe device %04x:%04x\n", reg32 & 0xffff, reg32 >> 16); } else { - printk_debug(" timeout!\n"); + printk(BIOS_DEBUG, " timeout!\n"); - printk_debug("Restrain PCIe port to x1\n"); + printk(BIOS_DEBUG, "Restrain PCIe port to x1\n"); reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0x214); reg32 &= ~(0xf << 1); @@ -601,17 +599,17 @@ static void i945_setup_pci_express_x16(void) reg16 &= ~(1 << 6); pcie_write_config16(PCI_DEV(0, 0x01, 0), 0x3e, reg16); - printk_debug("PCIe link training ..."); + printk(BIOS_DEBUG, "PCIe link training ..."); timeout = 0x7ffff; while ((((pcie_read_config32(PCI_DEV(0, 0x01, 0), 0x214) >> 16) & 4) != 3) && --timeout) ; reg32 = pci_read_config32(PCI_DEV(0xa, 0x00, 0), 0); if (reg32 != 0x00000000 && reg32 != 0xffffffff) { - printk_debug(" Detected PCIe x1 device %04x:%04x\n", + printk(BIOS_DEBUG, " Detected PCIe x1 device %04x:%04x\n", reg32 & 0xffff, reg32 >> 16); } else { - printk_debug(" timeout!\n"); - printk_debug("Disabling PCIe x16 port completely.\n"); + printk(BIOS_DEBUG, " timeout!\n"); + printk(BIOS_DEBUG, "Disabling PCIe x16 port completely.\n"); goto disable_pciexpress_x16_link; } } @@ -620,7 +618,7 @@ static void i945_setup_pci_express_x16(void) reg16 >>= 4; reg16 &= 0x3f; /* reg16 == 1 -> x1; reg16 == 16 -> x16 */ - printk_debug("PCIe x%d link training succeeded.\n", reg16); + printk(BIOS_DEBUG, "PCIe x%d link training succeeded.\n", reg16); reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0x204); reg32 &= 0xfffffc00; /* clear [9:0] */ @@ -633,9 +631,9 @@ static void i945_setup_pci_express_x16(void) } reg32 = (pci_read_config32(PCI_DEV(0xa, 0, 0), 0x8) >> 8); - printk_debug("PCIe device class: %06x\n", reg32); + printk(BIOS_DEBUG, "PCIe device class: %06x\n", reg32); if (reg32 == 0x030000) { - printk_debug("PCIe device is VGA. Disabling IGD.\n"); + printk(BIOS_DEBUG, "PCIe device is VGA. Disabling IGD.\n"); reg16 = (1 << 1); pci_write_config16(PCI_DEV(0, 0x0, 0), 0x52, reg16); @@ -758,7 +756,7 @@ static void i945_setup_pci_express_x16(void) disable_pciexpress_x16_link: /* For now we just disable the x16 link */ - printk_debug("Disabling PCI Express x16 Link\n"); + printk(BIOS_DEBUG, "Disabling PCI Express x16 Link\n"); MCHBAR16(UPMC1) |= (1 << 5) | (1 << 0); @@ -774,14 +772,14 @@ disable_pciexpress_x16_link: reg16 &= ~(1 << 6); pcie_write_config16(PCI_DEV(0, 0x01, 0), BCTRL1, reg16); - printk_debug("Wait for link to enter detect state... "); + printk(BIOS_DEBUG, "Wait for link to enter detect state... "); timeout = 0x7fffff; for (reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0x214); (reg32 & 0x000f0000) && --timeout;) ; if (!timeout) - printk_debug("timeout!\n"); + printk(BIOS_DEBUG, "timeout!\n"); else - printk_debug("ok\n"); + printk(BIOS_DEBUG, "ok\n"); /* Finally: Disable the PCI config header */ reg16 = pci_read_config16(PCI_DEV(0, 0x00, 0), DEVEN); @@ -793,7 +791,7 @@ static void i945_setup_root_complex_topology(void) { u32 reg32; - printk_debug("Setting up Root Complex Topology\n"); + printk(BIOS_DEBUG, "Setting up Root Complex Topology\n"); /* Egress Port Root Topology */ reg32 = EPBAR32(EPESD); diff --git a/src/northbridge/intel/i945/northbridge.c b/src/northbridge/intel/i945/northbridge.c index 5f71e19a90..1f5a0359c4 100644 --- a/src/northbridge/intel/i945/northbridge.c +++ b/src/northbridge/intel/i945/northbridge.c @@ -75,11 +75,11 @@ int add_northbridge_resources(struct lb_memory *mem) { u32 pcie_config_base, pcie_config_size; - printk_debug("Adding UMA memory area\n"); + printk(BIOS_DEBUG, "Adding UMA memory area\n"); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); - printk_debug("Adding PCIe config bar\n"); + printk(BIOS_DEBUG, "Adding PCIe config bar\n"); get_pcie_bar(&pcie_config_base, &pcie_config_size); lb_add_memory_range(mem, LB_MEM_RESERVED, pcie_config_base, pcie_config_size); @@ -140,13 +140,13 @@ static void pci_domain_set_resources(device_t dev) * this way? */ pci_tolm = find_pci_tolm(&dev->link[0]); - printk_debug("pci_tolm: 0x%x\n", pci_tolm); + printk(BIOS_DEBUG, "pci_tolm: 0x%x\n", pci_tolm); - printk_spew("Base of stolen memory: 0x%08x\n", + printk(BIOS_SPEW, "Base of stolen memory: 0x%08x\n", pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c)); tolud = pci_read_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x9c); - printk_spew("Top of Low Used DRAM: 0x%08x\n", tolud << 24); + printk(BIOS_SPEW, "Top of Low Used DRAM: 0x%08x\n", tolud << 24); tomk = tolud << 14; @@ -154,7 +154,7 @@ static void pci_domain_set_resources(device_t dev) reg8 = pci_read_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x9e); if (reg8 & 1) { int tseg_size = 0; - printk_debug("TSEG decoded, subtracting "); + printk(BIOS_DEBUG, "TSEG decoded, subtracting "); reg8 >>= 1; reg8 &= 3; switch (reg8) { @@ -169,14 +169,14 @@ static void pci_domain_set_resources(device_t dev) break; /* TSEG = 8M */ } - printk_debug("%dM\n", tseg_size >> 10); + printk(BIOS_DEBUG, "%dM\n", tseg_size >> 10); tomk -= tseg_size; } reg16 = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0, 0)), GGC); if (!(reg16 & 2)) { int uma_size = 0; - printk_debug("IGD decoded, subtracting "); + printk(BIOS_DEBUG, "IGD decoded, subtracting "); reg16 >>= 4; reg16 &= 7; switch (reg16) { @@ -188,7 +188,7 @@ static void pci_domain_set_resources(device_t dev) break; } - printk_debug("%dM UMA\n", uma_size >> 10); + printk(BIOS_DEBUG, "%dM UMA\n", uma_size >> 10); tomk -= uma_size; /* For reserving UMA memory in the memory map */ @@ -199,8 +199,8 @@ static void pci_domain_set_resources(device_t dev) /* The following needs to be 2 lines, otherwise the second * number is always 0 */ - printk_info("Available memory: %dK", (uint32_t)tomk); - printk_info(" (%dM)\n", (uint32_t)(tomk >> 10)); + printk(BIOS_INFO, "Available memory: %dK", (uint32_t)tomk); + printk(BIOS_INFO, " (%dM)\n", (uint32_t)(tomk >> 10)); /* Report the memory regions */ ram_resource(dev, 3, 0, 640); @@ -253,7 +253,7 @@ static void mc_read_resources(device_t dev) resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; - printk_debug("Adding PCIe enhanced config space BAR 0x%08lx-0x%08lx.\n", + printk(BIOS_DEBUG, "Adding PCIe enhanced config space BAR 0x%08lx-0x%08lx.\n", (unsigned long)(resource->base), (unsigned long)(resource->base + resource->size)); } @@ -289,15 +289,15 @@ static void northbridge_init(struct device *dev) { switch (pci_read_config32(dev, SKPAD)) { case 0xcafebabe: - printk_debug("Normal boot.\n"); + printk(BIOS_DEBUG, "Normal boot.\n"); acpi_slp_type=0; break; case 0xcafed00d: - printk_debug("S3 Resume.\n"); + printk(BIOS_DEBUG, "S3 Resume.\n"); acpi_slp_type=3; break; default: - printk_debug("Unknown boot method, assuming normal.\n"); + printk(BIOS_DEBUG, "Unknown boot method, assuming normal.\n"); acpi_slp_type=0; break; } diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c index 3f73549eb6..444a360cd3 100644 --- a/src/northbridge/intel/i945/raminit.c +++ b/src/northbridge/intel/i945/raminit.c @@ -25,7 +25,7 @@ /* Debugging macros. */ #if CONFIG_DEBUG_RAM_SETUP -#define PRINTK_DEBUG(x...) printk_debug(x) +#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) #else #define PRINTK_DEBUG(x...) #endif @@ -74,12 +74,12 @@ static void ram_read32(u32 offset) static void sdram_dump_mchbar_registers(void) { int i; - printk_debug("Dumping MCHBAR Registers\n"); + printk(BIOS_DEBUG, "Dumping MCHBAR Registers\n"); for (i=0; i<0xfff; i+=4) { if (MCHBAR32(i) == 0) continue; - printk_debug("0x%04x: 0x%08x\n", i, MCHBAR32(i)); + printk(BIOS_DEBUG, "0x%04x: 0x%08x\n", i, MCHBAR32(i)); } } #endif @@ -94,7 +94,7 @@ static int memclk(void) case 1: return 400; case 2: return 533; case 3: return 667; - default: printk_debug("memclk: unknown register value %x\n", ((MCHBAR32(CLKCFG) >> 4) & 7) - offset); + default: printk(BIOS_DEBUG, "memclk: unknown register value %x\n", ((MCHBAR32(CLKCFG) >> 4) & 7) - offset); } return -1; } @@ -106,7 +106,7 @@ static int fsbclk(void) case 0: return 400; case 1: return 533; case 3: return 667; - default: printk_debug("fsbclk: unknown register value %x\n", MCHBAR32(CLKCFG) & 7); + default: printk(BIOS_DEBUG, "fsbclk: unknown register value %x\n", MCHBAR32(CLKCFG) & 7); } return -1; } @@ -118,7 +118,7 @@ static int fsbclk(void) case 0: return 1066; case 1: return 533; case 2: return 800; - default: printk_debug("fsbclk: unknown register value %x\n", MCHBAR32(CLKCFG) & 7); + default: printk(BIOS_DEBUG, "fsbclk: unknown register value %x\n", MCHBAR32(CLKCFG) & 7); } return -1; } @@ -234,7 +234,7 @@ static void sdram_detect_errors(void) if (reg8 & ((1<<7)|(1<<2))) { if (reg8 & (1<<2)) { - printk_debug("SLP S4# Assertion Width Violation.\n"); + printk(BIOS_DEBUG, "SLP S4# Assertion Width Violation.\n"); /* Write back clears bit 2 */ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); do_reset = 1; @@ -242,7 +242,7 @@ static void sdram_detect_errors(void) } if (reg8 & (1<<7)) { - printk_debug("DRAM initialization was interrupted.\n"); + printk(BIOS_DEBUG, "DRAM initialization was interrupted.\n"); reg8 &= ~(1<<7); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); do_reset = 1; @@ -254,7 +254,7 @@ static void sdram_detect_errors(void) pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); if (do_reset) { - printk_debug("Reset required.\n"); + printk(BIOS_DEBUG, "Reset required.\n"); outb(0x00, 0xcf9); outb(0x0e, 0xcf9); for (;;) asm("hlt"); /* Wait for reset! */ @@ -300,10 +300,10 @@ static void sdram_get_dram_configuration(struct sys_info *sysinfo) if (sdram_capabilities_dual_channel()) { sysinfo->dual_channel = 1; - printk_debug("This mainboard supports Dual Channel Operation.\n"); + printk(BIOS_DEBUG, "This mainboard supports Dual Channel Operation.\n"); } else { sysinfo->dual_channel = 0; - printk_debug("This mainboard supports only Single Channel Operation.\n"); + printk(BIOS_DEBUG, "This mainboard supports only Single Channel Operation.\n"); } /** @@ -339,10 +339,10 @@ static void sdram_get_dram_configuration(struct sys_info *sysinfo) if (!sdram_capabilities_two_dimms_per_channel() && (i& 1)) continue; - printk_debug("DDR II Channel %d Socket %d: ", (i >> 1), (i & 1)); + printk(BIOS_DEBUG, "DDR II Channel %d Socket %d: ", (i >> 1), (i & 1)); if (spd_read_byte(device, SPD_MEMORY_TYPE) != SPD_MEMORY_TYPE_SDRAM_DDR2) { - printk_debug("N/A\n"); + printk(BIOS_DEBUG, "N/A\n"); continue; } @@ -360,29 +360,29 @@ static void sdram_get_dram_configuration(struct sys_info *sysinfo) case 0x08: switch (spd_read_byte(device, SPD_NUM_DIMM_BANKS) & 0x0f) { case 1: - printk_debug("x8DDS\n"); + printk(BIOS_DEBUG, "x8DDS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X8DDS; break; case 0: - printk_debug("x8DS\n"); + printk(BIOS_DEBUG, "x8DS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X8DS; break; default: - printk_debug ("Unsupported.\n"); + printk(BIOS_DEBUG, "Unsupported.\n"); } break; case 0x10: switch (spd_read_byte(device, SPD_NUM_DIMM_BANKS) & 0x0f) { case 1: - printk_debug("x16DS\n"); + printk(BIOS_DEBUG, "x16DS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X16DS; break; case 0: - printk_debug("x16SS\n"); + printk(BIOS_DEBUG, "x16SS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X16SS; break; default: - printk_debug ("Unsupported.\n"); + printk(BIOS_DEBUG, "Unsupported.\n"); } break; default: @@ -397,7 +397,7 @@ static void sdram_get_dram_configuration(struct sys_info *sysinfo) } if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { - printk_info("Channel 0 has no memory populated.\n"); + printk(BIOS_INFO, "Channel 0 has no memory populated.\n"); } } @@ -556,7 +556,7 @@ static void sdram_detect_cas_latency_and_ram_speed(struct sys_info * sysinfo, u8 } if (sysinfo->memory_frequency && sysinfo->cas) { - printk_debug("Memory will be driven at %dMHz with CAS=%d clocks\n", + printk(BIOS_DEBUG, "Memory will be driven at %dMHz with CAS=%d clocks\n", sysinfo->memory_frequency, sysinfo->cas); } else { die("Could not find common memory frequency and CAS\n"); @@ -599,7 +599,7 @@ static void sdram_detect_smallest_tRAS(struct sys_info * sysinfo) die("DDR-II Module does not support this frequency (tRAS error)\n"); } - printk_debug("tRAS = %d cycles\n", tRAS_cycles); + printk(BIOS_DEBUG, "tRAS = %d cycles\n", tRAS_cycles); sysinfo->tras = tRAS_cycles; } @@ -640,7 +640,7 @@ static void sdram_detect_smallest_tRP(struct sys_info * sysinfo) die("DDR-II Module does not support this frequency (tRP error)\n"); } - printk_debug("tRP = %d cycles\n", tRP_cycles); + printk(BIOS_DEBUG, "tRP = %d cycles\n", tRP_cycles); sysinfo->trp = tRP_cycles; } @@ -680,7 +680,7 @@ static void sdram_detect_smallest_tRCD(struct sys_info * sysinfo) die("DDR-II Module does not support this frequency (tRCD error)\n"); } - printk_debug("tRCD = %d cycles\n", tRCD_cycles); + printk(BIOS_DEBUG, "tRCD = %d cycles\n", tRCD_cycles); sysinfo->trcd = tRCD_cycles; } @@ -720,7 +720,7 @@ static void sdram_detect_smallest_tWR(struct sys_info * sysinfo) die("DDR-II Module does not support this frequency (tWR error)\n"); } - printk_debug("tWR = %d cycles\n", tWR_cycles); + printk(BIOS_DEBUG, "tWR = %d cycles\n", tWR_cycles); sysinfo->twr = tWR_cycles; } @@ -756,7 +756,7 @@ static void sdram_detect_smallest_tRFC(struct sys_info * sysinfo) /* Can this happen? Go back to 127.5ns just to be sure * we don't run out of the array. This may be wrong */ - printk_debug("DIMM %d is 1Gb x16.. Please report.\n", i); + printk(BIOS_DEBUG, "DIMM %d is 1Gb x16.. Please report.\n", i); reg8 = 3; } @@ -772,7 +772,7 @@ static void sdram_detect_smallest_tRFC(struct sys_info * sysinfo) } sysinfo->trfc = tRFC_cycles[index]; - printk_debug("tRFC = %d cycles\n", tRFC_cycles[index]); + printk(BIOS_DEBUG, "tRFC = %d cycles\n", tRFC_cycles[index]); } static void sdram_detect_smallest_refresh(struct sys_info * sysinfo) @@ -804,7 +804,7 @@ static void sdram_detect_smallest_refresh(struct sys_info * sysinfo) die("DDR-II module has unsupported refresh value\n"); } - printk_debug("Refresh: %s\n", sysinfo->refresh?"7.8us":"15.6us"); + printk(BIOS_DEBUG, "Refresh: %s\n", sysinfo->refresh?"7.8us":"15.6us"); } static void sdram_verify_burst_length(struct sys_info * sysinfo) @@ -1137,18 +1137,18 @@ static void sdram_rcomp_buffer_strength_and_slew(struct sys_info *sysinfo) /* Dual Channel needs different tables. */ if (sdram_capabilities_dual_channel()) { - printk_debug("Programming Dual Channel RCOMP\n"); + printk(BIOS_DEBUG, "Programming Dual Channel RCOMP\n"); strength_multiplier = dual_channel_strength_multiplier; dual_channel = 1; idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[2]; } else { - printk_debug("Programming Single Channel RCOMP\n"); + printk(BIOS_DEBUG, "Programming Single Channel RCOMP\n"); strength_multiplier = single_channel_strength_multiplier; dual_channel = 0; idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[1]; } - printk_debug("Table Index: %d\n", idx); + printk(BIOS_DEBUG, "Table Index: %d\n", idx); MCHBAR8(G1SC) = strength_multiplier[idx * 8 + 0]; MCHBAR8(G2SC) = strength_multiplier[idx * 8 + 1]; @@ -1197,7 +1197,7 @@ static void sdram_program_dll_timings(struct sys_info *sysinfo) u32 chan0dll = 0, chan1dll = 0; int i; - printk_debug ("Programming DLL Timings... \n"); + printk(BIOS_DEBUG, "Programming DLL Timings... \n"); MCHBAR16(DQSMT) &= ~( (3 << 12) | (1 << 10) | ( 0xf << 0) ); MCHBAR16(DQSMT) |= (1 << 13) | (0xc << 0); @@ -1249,7 +1249,7 @@ static void sdram_initialize_system_memory_io(struct sys_info *sysinfo) u8 reg8; u32 reg32; - printk_debug ("Initializing System Memory IO... \n"); + printk(BIOS_DEBUG, "Initializing System Memory IO... \n"); /* Enable Data Half Clock Pushout */ reg8 = MCHBAR8(C0HCTC); reg8 &= ~0x1f; @@ -1291,7 +1291,7 @@ static void sdram_enable_system_memory_io(struct sys_info *sysinfo) { u32 reg32; - printk_debug ("Enabling System Memory IO... \n"); + printk(BIOS_DEBUG, "Enabling System Memory IO... \n"); reg32 = MCHBAR32(RCVENMT); reg32 &= ~(0x3f << 6); @@ -1401,7 +1401,7 @@ static struct dimm_size sdram_get_dimm_size(u16 device) /* Don't die here, I have not come across any of these to test what * actually happens. */ - printk_err("Assymetric DIMMs are not supported by this chipset\n"); + printk(BIOS_ERR, "Assymetric DIMMs are not supported by this chipset\n"); sz.side2 -= (rows & 0x0f); /* Subtract out rows on side 1 */ sz.side2 += ((rows >> 4) & 0x0f); /* Add in rows on side 2 */ @@ -1445,7 +1445,7 @@ static void sdram_detect_dimm_size(struct sys_info * sysinfo) sysinfo->banksize[i * 2] = 1 << (sz.side1 - 28); - printk_debug("DIMM %d side 0 = %d MB\n", i, sysinfo->banksize[i * 2] * 32 ); + printk(BIOS_DEBUG, "DIMM %d side 0 = %d MB\n", i, sysinfo->banksize[i * 2] * 32 ); if (!sz.side2) continue; @@ -1456,7 +1456,7 @@ static void sdram_detect_dimm_size(struct sys_info * sysinfo) sysinfo->banksize[(i * 2) + 1] = 1 << (sz.side2 - 28); - printk_debug("DIMM %d side 1 = %d MB\n", i, sysinfo->banksize[(i * 2) + 1] * 32); + printk(BIOS_DEBUG, "DIMM %d side 1 = %d MB\n", i, sysinfo->banksize[(i * 2) + 1] * 32); } } @@ -1465,7 +1465,7 @@ static int sdram_program_row_boundaries(struct sys_info *sysinfo) int i; int cum0, cum1, tolud, tom; - printk_debug ("Setting RAM size... \n"); + printk(BIOS_DEBUG, "Setting RAM size... \n"); cum0 = 0; for(i = 0; i < 2 * DIMM_SOCKETS; i++) { @@ -1507,9 +1507,9 @@ static int sdram_program_row_boundaries(struct sys_info *sysinfo) pci_write_config8(PCI_DEV(0,0,0), TOLUD, tolud); - printk_debug("C0DRB = 0x%08x\n", MCHBAR32(C0DRB0)); - printk_debug("C1DRB = 0x%08x\n", MCHBAR32(C1DRB0)); - printk_debug("TOLUD = 0x%04x\n", pci_read_config8(PCI_DEV(0,0,0), TOLUD)); + printk(BIOS_DEBUG, "C0DRB = 0x%08x\n", MCHBAR32(C0DRB0)); + printk(BIOS_DEBUG, "C1DRB = 0x%08x\n", MCHBAR32(C1DRB0)); + printk(BIOS_DEBUG, "TOLUD = 0x%04x\n", pci_read_config8(PCI_DEV(0,0,0), TOLUD)); pci_write_config16(PCI_DEV(0,0,0), TOM, tom); @@ -1521,7 +1521,7 @@ static int sdram_set_row_attributes(struct sys_info *sysinfo) int i, value; u16 dra0=0, dra1=0, dra = 0; - printk_debug ("Setting row attributes... \n"); + printk(BIOS_DEBUG, "Setting row attributes... \n"); for(i=0; i < 2 * DIMM_SOCKETS; i++) { u16 device; u8 columnsrows; @@ -1561,8 +1561,8 @@ static int sdram_set_row_attributes(struct sys_info *sysinfo) MCHBAR16(C0DRA0) = dra0; MCHBAR16(C1DRA0) = dra1; - printk_debug("C0DRA = 0x%04x\n", dra0); - printk_debug("C1DRA = 0x%04x\n", dra1); + printk(BIOS_DEBUG, "C0DRA = 0x%04x\n", dra0); + printk(BIOS_DEBUG, "C1DRA = 0x%04x\n", dra1); return 0; } @@ -1587,7 +1587,7 @@ static void sdram_set_bank_architecture(struct sys_info *sysinfo) if (sysinfo->banks[i] != 8) continue; - printk_spew("DIMM%d has 8 banks.\n", i); + printk(BIOS_SPEW, "DIMM%d has 8 banks.\n", i); if (i & 1) MCHBAR16(off32) |= 0x50; @@ -1852,7 +1852,7 @@ static void sdram_set_channel_mode(struct sys_info *sysinfo) { u32 reg32; - printk_debug("Setting mode of operation for memory channels..."); + printk(BIOS_DEBUG, "Setting mode of operation for memory channels..."); if (sdram_capabilities_interleave() && ( ( sysinfo->banksize[0] + sysinfo->banksize[1] + @@ -1870,21 +1870,21 @@ static void sdram_set_channel_mode(struct sys_info *sysinfo) if(sysinfo->interleaved) { /* Dual Channel Interleaved */ - printk_debug("Dual Channel Interleaved.\n"); + printk(BIOS_DEBUG, "Dual Channel Interleaved.\n"); reg32 |= (1 << 1); } else if (sysinfo->dimm[0] == SYSINFO_DIMM_NOT_POPULATED && sysinfo->dimm[1] == SYSINFO_DIMM_NOT_POPULATED) { /* Channel 1 only */ - printk_debug("Single Channel 1 only.\n"); + printk(BIOS_DEBUG, "Single Channel 1 only.\n"); reg32 |= (1 << 2); } else if (sdram_capabilities_dual_channel() && sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED) { /* Dual Channel Assymetric */ - printk_debug("Dual Channel Assymetric.\n"); + printk(BIOS_DEBUG, "Dual Channel Assymetric.\n"); reg32 |= (1 << 0); } else { /* All bits 0 means Single Channel 0 operation */ - printk_debug("Single Channel 0 only.\n"); + printk(BIOS_DEBUG, "Single Channel 0 only.\n"); } reg32 |= (1 << 10); @@ -1934,14 +1934,14 @@ static void sdram_program_graphics_frequency(struct sys_info *sysinfo) #define VOLTAGE_1_05 0x00 #define VOLTAGE_1_50 0x01 - printk_debug ("Setting Graphics Frequency... \n"); + printk(BIOS_DEBUG, "Setting Graphics Frequency... \n"); - printk_debug("FSB: %d MHz ", sysinfo->fsb_frequency); + printk(BIOS_DEBUG, "FSB: %d MHz ", sysinfo->fsb_frequency); voltage = VOLTAGE_1_05; if (MCHBAR32(DFT_STRAP1) & (1 << 20)) voltage = VOLTAGE_1_50; - printk_debug("Voltage: %s ", (voltage==VOLTAGE_1_05)?"1.05V":"1.5V"); + printk(BIOS_DEBUG, "Voltage: %s ", (voltage==VOLTAGE_1_05)?"1.05V":"1.5V"); /* Gate graphics hardware for frequency change */ reg8 = pci_read_config16(PCI_DEV(0,2,0), GCFC + 1); @@ -1971,12 +1971,12 @@ static void sdram_program_graphics_frequency(struct sys_info *sysinfo) freq = CRCLK_166MHz; } - printk_debug("Render: "); + printk(BIOS_DEBUG, "Render: "); switch (freq) { - case CRCLK_166MHz: printk_debug("166Mhz"); break; - case CRCLK_200MHz: printk_debug("200Mhz"); break; - case CRCLK_250MHz: printk_debug("250Mhz"); break; - case CRCLK_400MHz: printk_debug("400Mhz"); break; + case CRCLK_166MHz: printk(BIOS_DEBUG, "166Mhz"); break; + case CRCLK_200MHz: printk(BIOS_DEBUG, "200Mhz"); break; + case CRCLK_250MHz: printk(BIOS_DEBUG, "250Mhz"); break; + case CRCLK_400MHz: printk(BIOS_DEBUG, "400Mhz"); break; } if (i945_silicon_revision() == 0) { @@ -2021,10 +2021,10 @@ static void sdram_program_graphics_frequency(struct sys_info *sysinfo) if (voltage == VOLTAGE_1_05) { reg8 |= CDCLK_200MHz; - printk_debug(" Display: 200MHz\n"); + printk(BIOS_DEBUG, " Display: 200MHz\n"); } else { reg8 |= CDCLK_320MHz; - printk_debug(" Display: 320MHz\n"); + printk(BIOS_DEBUG, " Display: 320MHz\n"); } pci_write_config8(PCI_DEV(0,2,0), GCFC, reg8); @@ -2050,21 +2050,21 @@ static void sdram_program_memory_frequency(struct sys_info *sysinfo) offset++; #endif - printk_debug ("Setting Memory Frequency... "); + printk(BIOS_DEBUG, "Setting Memory Frequency... "); clkcfg = MCHBAR32(CLKCFG); - printk_debug("CLKCFG=0x%08x, ", clkcfg); + printk(BIOS_DEBUG, "CLKCFG=0x%08x, ", clkcfg); clkcfg &= ~( (1 << 12) | (1 << 7) | ( 7 << 4) ); if (sysinfo->mvco4x) { - printk_debug("MVCO 4x, "); + printk(BIOS_DEBUG, "MVCO 4x, "); clkcfg &= ~(1 << 12); } if (sysinfo->clkcfg_bit7) { - printk_debug("second VCO, "); + printk(BIOS_DEBUG, "second VCO, "); clkcfg |= (1 << 7); } @@ -2077,7 +2077,7 @@ static void sdram_program_memory_frequency(struct sys_info *sysinfo) } if (MCHBAR32(CLKCFG) == clkcfg) { - printk_debug ("ok (unchanged)\n"); + printk(BIOS_DEBUG, "ok (unchanged)\n"); return; } @@ -2118,8 +2118,8 @@ cache_code: goto vco_update; out: - printk_debug("CLKCFG=0x%08x, ", MCHBAR32(CLKCFG)); - printk_debug ("ok\n"); + printk(BIOS_DEBUG, "CLKCFG=0x%08x, ", MCHBAR32(CLKCFG)); + printk(BIOS_DEBUG, "ok\n"); } static void sdram_program_clock_crossing(void) @@ -2222,28 +2222,28 @@ static void sdram_program_clock_crossing(void) }; #endif - printk_debug("Programming Clock Crossing..."); + printk(BIOS_DEBUG, "Programming Clock Crossing..."); - printk_debug("MEM="); + printk(BIOS_DEBUG, "MEM="); switch (memclk()) { - case 400: printk_debug("400"); idx += 0; break; - case 533: printk_debug("533"); idx += 2; break; - case 667: printk_debug("667"); idx += 4; break; - default: printk_debug("RSVD %x", memclk()); return; + case 400: printk(BIOS_DEBUG, "400"); idx += 0; break; + case 533: printk(BIOS_DEBUG, "533"); idx += 2; break; + case 667: printk(BIOS_DEBUG, "667"); idx += 4; break; + default: printk(BIOS_DEBUG, "RSVD %x", memclk()); return; } - printk_debug(" FSB="); + printk(BIOS_DEBUG, " FSB="); switch (fsbclk()) { - case 400: printk_debug("400"); idx += 0; break; - case 533: printk_debug("533"); idx += 6; break; - case 667: printk_debug("667"); idx += 12; break; - case 800: printk_debug("800"); idx += 18; break; - case 1066: printk_debug("1066"); idx += 24; break; - default: printk_debug("RSVD %x\n", fsbclk()); return; + case 400: printk(BIOS_DEBUG, "400"); idx += 0; break; + case 533: printk(BIOS_DEBUG, "533"); idx += 6; break; + case 667: printk(BIOS_DEBUG, "667"); idx += 12; break; + case 800: printk(BIOS_DEBUG, "800"); idx += 18; break; + case 1066: printk(BIOS_DEBUG, "1066"); idx += 24; break; + default: printk(BIOS_DEBUG, "RSVD %x\n", fsbclk()); return; } if (command_clock_crossing[idx]==0xffffffff) { - printk_debug("Invalid MEM/FSB combination!\n"); + printk(BIOS_DEBUG, "Invalid MEM/FSB combination!\n"); } MCHBAR32(CCCFT + 0) = command_clock_crossing[idx]; @@ -2254,7 +2254,7 @@ static void sdram_program_clock_crossing(void) MCHBAR32(C1DCCFT + 0) = data_clock_crossing[idx]; MCHBAR32(C1DCCFT + 4) = data_clock_crossing[idx + 1]; - printk_debug("... ok\n"); + printk(BIOS_DEBUG, "... ok\n"); } static void sdram_disable_fast_dispatch(void) @@ -2569,7 +2569,7 @@ static void sdram_power_management(struct sys_info *sysinfo) #ifdef C2_SELF_REFRESH_DISABLE if (integrated_graphics) { - printk_debug("C2 self-refresh with IGD\n"); + printk(BIOS_DEBUG, "C2 self-refresh with IGD\n"); MCHBAR16(MIPMC4) = 0x0468; MCHBAR16(MIPMC5) = 0x046c; MCHBAR16(MIPMC6) = 0x046c; @@ -2728,7 +2728,7 @@ static void sdram_on_die_termination(struct sys_info *sysinfo) if ( !(sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED && sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED) ) { - printk_debug("one dimm per channel config.. \n"); + printk(BIOS_DEBUG, "one dimm per channel config.. \n"); reg32 = MCHBAR32(C0ODT); reg32 &= ~(7 << 28); @@ -2832,7 +2832,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) continue; } - printk_debug("jedec enable sequence: bank %d\n", i); + printk(BIOS_DEBUG, "jedec enable sequence: bank %d\n", i); switch (i) { case 0: /* Start at address 0 */ @@ -2845,7 +2845,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) } default: if (nonzero != -1) { - printk_debug("bankaddr from bank size of rank %d\n", nonzero); + printk(BIOS_DEBUG, "bankaddr from bank size of rank %d\n", nonzero); bankaddr += sysinfo->banksize[nonzero] << (sysinfo->interleaved ? 26 : 25); break; @@ -3010,7 +3010,7 @@ void sdram_initialize(int boot_path) sdram_detect_errors(); - printk_debug ("Setting up RAM controller.\n"); + printk(BIOS_DEBUG, "Setting up RAM controller.\n"); memset(&sysinfo, 0, sizeof(sysinfo)); @@ -3131,7 +3131,7 @@ void sdram_initialize(int boot_path) reg8 &= ~(1 << 7); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); - printk_debug("RAM initialization finished.\n"); + printk(BIOS_DEBUG, "RAM initialization finished.\n"); sdram_setup_processor_side(); } diff --git a/src/northbridge/intel/i945/rcven.c b/src/northbridge/intel/i945/rcven.c index 846af4f080..a912b2695f 100644 --- a/src/northbridge/intel/i945/rcven.c +++ b/src/northbridge/intel/i945/rcven.c @@ -67,7 +67,7 @@ static void set_receive_enable(int channel_offset, u8 medium, u8 coarse) { u32 reg32; - printk_spew(" set_receive_enable() medium=0x%x, coarse=0x%x\n", medium, coarse); + printk(BIOS_SPEW, " set_receive_enable() medium=0x%x, coarse=0x%x\n", medium, coarse); reg32 = MCHBAR32(C0DRT1 + channel_offset); reg32 &= 0xf0ffffff; @@ -76,7 +76,7 @@ static void set_receive_enable(int channel_offset, u8 medium, u8 coarse) /* This should never happen: */ if (coarse > 0x0f) - printk_debug("set_receive_enable: coarse overflow: 0x%02x.\n", coarse); + printk(BIOS_DEBUG, "set_receive_enable: coarse overflow: 0x%02x.\n", coarse); /* medium control * @@ -102,7 +102,7 @@ static void set_receive_enable(int channel_offset, u8 medium, u8 coarse) static int normalize(int channel_offset, u8 * mediumcoarse, u8 * fine) { - printk_spew(" normalize()\n"); + printk(BIOS_SPEW, " normalize()\n"); if (*fine < 0x80) return 0; @@ -111,7 +111,7 @@ static int normalize(int channel_offset, u8 * mediumcoarse, u8 * fine) *mediumcoarse += 1; if (*mediumcoarse >= 0x40) { - printk_debug("Normalize Error\n"); + printk(BIOS_DEBUG, "Normalize Error\n"); return -1; } @@ -129,11 +129,11 @@ static int find_preamble(int channel_offset, u8 * mediumcoarse, /* find start of the data phase */ u32 reg32; - printk_spew(" find_preamble()\n"); + printk(BIOS_SPEW, " find_preamble()\n"); do { if (*mediumcoarse < 4) { - printk_debug("No Preamble found.\n"); + printk(BIOS_DEBUG, "No Preamble found.\n"); return -1; } *mediumcoarse -= 4; @@ -146,7 +146,7 @@ static int find_preamble(int channel_offset, u8 * mediumcoarse, } while (reg32 & (1 << 19)); if (!(reg32 & (1 << 18))) { - printk_debug("No Preamble found (neither high nor low).\n"); + printk(BIOS_DEBUG, "No Preamble found (neither high nor low).\n"); return -1; } @@ -159,14 +159,14 @@ static int find_preamble(int channel_offset, u8 * mediumcoarse, static int add_quarter_clock(int channel_offset, u8 * mediumcoarse, u8 * fine) { - printk_spew(" add_quarter_clock() mediumcoarse=%02x fine=%02x\n", + printk(BIOS_SPEW, " add_quarter_clock() mediumcoarse=%02x fine=%02x\n", *mediumcoarse, *fine); if (*fine >= 0x80) { *fine -= 0x80; *mediumcoarse += 2; if (*mediumcoarse >= 0x40) { - printk_debug("clocks at max.\n"); + printk(BIOS_DEBUG, "clocks at max.\n"); return -1; } @@ -186,7 +186,7 @@ static int find_strobes_low(int channel_offset, u8 * mediumcoarse, u8 * fine, { u32 rcvenmt; - printk_spew(" find_strobes_low()\n"); + printk(BIOS_SPEW, " find_strobes_low()\n"); for (;;) { MCHBAR8(C0WL0REOST + channel_offset) = *fine; @@ -211,7 +211,7 @@ static int find_strobes_low(int channel_offset, u8 * mediumcoarse, u8 * fine, } - printk_debug("Could not find low strobe\n"); + printk(BIOS_DEBUG, "Could not find low strobe\n"); return 0; } @@ -222,7 +222,7 @@ static int find_strobes_edge(int channel_offset, u8 * mediumcoarse, u8 * fine, int counter; u32 rcvenmt; - printk_spew(" find_strobes_edge()\n"); + printk(BIOS_SPEW, " find_strobes_edge()\n"); counter = 8; set_receive_enable(channel_offset, *mediumcoarse & 3, @@ -257,7 +257,7 @@ static int find_strobes_edge(int channel_offset, u8 * mediumcoarse, u8 * fine, continue; } - printk_debug("Could not find rising edge.\n"); + printk(BIOS_DEBUG, "Could not find rising edge.\n"); return -1; } @@ -286,7 +286,7 @@ static int receive_enable_autoconfig(int channel_offset, u8 mediumcoarse; u8 fine; - printk_spew("receive_enable_autoconfig() for channel %d\n", + printk(BIOS_SPEW, "receive_enable_autoconfig() for channel %d\n", channel_offset ? 1 : 0); /* Set initial values */ @@ -315,7 +315,7 @@ static int receive_enable_autoconfig(int channel_offset, * It can be removed when the output message is not printed anymore */ if (MCHBAR8(C0WL0REOST + channel_offset) == 0) { - printk_debug("Weird. No C%sWL0REOST\n", channel_offset?"1":"0"); + printk(BIOS_DEBUG, "Weird. No C%sWL0REOST\n", channel_offset?"1":"0"); } return 0; diff --git a/src/northbridge/via/cn400/agp.c b/src/northbridge/via/cn400/agp.c index c9cca61759..a302759371 100644 --- a/src/northbridge/via/cn400/agp.c +++ b/src/northbridge/via/cn400/agp.c @@ -36,7 +36,7 @@ static void agp_init(device_t dev) int i, j; /* Some of this may not be necessary (should be handled by the OS). */ - printk_debug("Enabling AGP.\n"); + printk(BIOS_DEBUG, "Enabling AGP.\n"); /* Allow R/W access to AGP registers. */ pci_write_config8(dev, 0x4d, 0x05); @@ -113,17 +113,17 @@ static void agp_init(device_t dev) pci_write_config8(dev, 0xc1, 0x02); #ifdef DEBUG_CN400 - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } #endif } @@ -170,7 +170,7 @@ static void agp_bridge_init(device_t dev) u8 reg8; int i, j; - printk_debug("Entering %s\n", __func__); + printk(BIOS_DEBUG, "Entering %s\n", __func__); pci_write_config16(dev, 0x4, 0x0107); @@ -208,17 +208,17 @@ static void agp_bridge_init(device_t dev) pci_write_config8(dev, 0x44, 0x34); pci_write_config8(dev, 0x45, 0x72); - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } } diff --git a/src/northbridge/via/cn400/northbridge.c b/src/northbridge/via/cn400/northbridge.c index 86dea8d3c7..cd6a2abed9 100644 --- a/src/northbridge/via/cn400/northbridge.c +++ b/src/northbridge/via/cn400/northbridge.c @@ -41,7 +41,7 @@ static void memctrl_init(device_t dev) u8 ranks, pagec, paged, pagee, pagef, shadowreg, reg8; int i, j; - printk_spew("Entering cn400 memctrl_init.\n"); + printk(BIOS_SPEW, "Entering cn400 memctrl_init.\n"); /* vlink mirror */ vlink_dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CN400_VLINK, 0); @@ -53,7 +53,7 @@ static void memctrl_init(device_t dev) reg16 = (((u16)(ranks - 1) << 9) & 0xFFF0) | 0x01F0; pci_write_config16(dev, 0x84, reg16); - printk_spew("Low Top Address = 0x%04X\n", reg16); + printk(BIOS_SPEW, "Low Top Address = 0x%04X\n", reg16); /* Set up the VGA framebuffer size and Base Address */ /* Note dependencies between agp.c and vga.c and here */ @@ -110,20 +110,20 @@ static void memctrl_init(device_t dev) pci_write_config8(dev, 0xA0, reg8); #ifdef DEBUG_CN400 - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } #endif - printk_spew("Leaving cn400 %s.\n", __func__); + printk(BIOS_SPEW, "Leaving cn400 %s.\n", __func__); } static const struct device_operations memctrl_operations = { @@ -144,7 +144,7 @@ static void cn400_domain_read_resources(device_t dev) { struct resource *resource; - printk_spew("Entering %s.\n", __func__); + printk(BIOS_SPEW, "Entering %s.\n", __func__); /* Initialize the system wide I/O space constraints. */ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); @@ -158,7 +158,7 @@ static void cn400_domain_read_resources(device_t dev) resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; - printk_spew("Leaving %s.\n", __func__); + printk(BIOS_SPEW, "Leaving %s.\n", __func__); } static void ram_resource(device_t dev, unsigned long index, @@ -180,7 +180,7 @@ static void ram_reservation(device_t dev, unsigned long index, { struct resource *res; - printk_spew("Configuring Via C3 LAPIC Fixed Resource\n"); + printk(BIOS_SPEW, "Configuring Via C3 LAPIC Fixed Resource\n"); /* Fixed LAPIC resource */ res = new_resource(dev, 1); res->base = (resource_t) base; @@ -205,7 +205,7 @@ static u32 find_pci_tolm(struct bus *bus) struct resource *min = NULL; u32 tolm; - printk_spew("Entering CN400 find_pci_tolm\n"); + printk(BIOS_SPEW, "Entering CN400 find_pci_tolm\n"); search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); @@ -213,7 +213,7 @@ static u32 find_pci_tolm(struct bus *bus) if (min && tolm > min->base) tolm = min->base; - printk_spew("Leaving CN400 find_pci_tolm\n"); + printk(BIOS_SPEW, "Leaving CN400 find_pci_tolm\n"); return tolm; } @@ -229,7 +229,7 @@ static void cn400_domain_set_resources(device_t dev) device_t mc_dev; u32 pci_tolm; - printk_spew("Entering %s.\n", __func__); + printk(BIOS_SPEW, "Entering %s.\n", __func__); pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, @@ -244,7 +244,7 @@ static void cn400_domain_set_resources(device_t dev) tomk = rambits * 32 * 1024; /* Compute the Top Of Low Memory (TOLM), in Kb. */ tolmk = pci_tolm >> 10; - printk_spew("tomk is 0x%x, tolmk is 0x%08X\n", tomk, tolmk); + printk(BIOS_SPEW, "tomk is 0x%x, tolmk is 0x%08X\n", tomk, tolmk); if (tolmk >= tomk) { /* The PCI hole does does not overlap the memory. */ tolmk = tomk; @@ -254,7 +254,7 @@ static void cn400_domain_set_resources(device_t dev) /* Locate the High Tables at the Top of Low Memory below the Video RAM */ high_tables_base = (uint64_t) (tolmk - (CONFIG_VIDEO_MB *1024) - HIGH_TABLES_SIZE) * 1024; high_tables_size = (uint64_t) HIGH_TABLES_SIZE* 1024; - printk_spew("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); + printk(BIOS_SPEW, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); #endif /* Report the memory regions. */ @@ -267,12 +267,12 @@ static void cn400_domain_set_resources(device_t dev) } assign_resources(&dev->link[0]); - printk_spew("Leaving %s.\n", __func__); + printk(BIOS_SPEW, "Leaving %s.\n", __func__); } static unsigned int cn400_domain_scan_bus(device_t dev, unsigned int max) { - printk_debug("Entering %s.\n", __func__); + printk(BIOS_DEBUG, "Entering %s.\n", __func__); max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max); return max; @@ -305,7 +305,7 @@ static const struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew("In cn400 enable_dev for device %s.\n", dev_path(dev)); + printk(BIOS_SPEW, "In cn400 enable_dev for device %s.\n", dev_path(dev)); /* Set the operations if it is a special bus type. */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { diff --git a/src/northbridge/via/cn400/vga.c b/src/northbridge/via/cn400/vga.c index 5a58d17550..ac222ff157 100644 --- a/src/northbridge/via/cn400/vga.c +++ b/src/northbridge/via/cn400/vga.c @@ -52,14 +52,14 @@ static void vga_init(device_t dev) #endif temp = (0xffffffff - CONFIG_FALLBACK_SIZE - 0xffff); - printk_debug("Copying BOCHS BIOS from 0x%08X to 0xf000\n", temp); + printk(BIOS_DEBUG, "Copying BOCHS BIOS from 0x%08X to 0xf000\n", temp); /* * Copy BOCHS BIOS from 4G-CONFIG_FALLBACK_SIZE-64k (in flash) to 0xf0000 (in RAM) * This is for compatibility with the VGA ROM's BIOS callbacks. */ //memcpy(0xf0000, (0xffffffff - CONFIG_ROM_SIZE - 0xffff), 0x10000); memcpy(0xf0000, temp, 0x10000); - printk_debug("Initializing VGA\n"); + printk(BIOS_DEBUG, "Initializing VGA\n"); /* Set memory rate to 200 MHz. */ outb(0x3d, CRTM_INDEX); @@ -79,12 +79,12 @@ static void vga_init(device_t dev) pci_write_config32(dev, 0x10, 0xf0000008); pci_write_config32(dev, 0x14, 0xf4000000); - printk_debug("INSTALL REAL-MODE IDT\n"); + printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); - printk_debug("DO THE VGA BIOS\n"); + printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); do_vgabios(); /* VGA seems to work without this, but crash & burn with it. */ - // printk_debug("Enable VGA console\n"); + // printk(BIOS_DEBUG, "Enable VGA console\n"); // vga_enable_console(); /* It's not clear if these need to be programmed before or after @@ -106,17 +106,17 @@ static void vga_init(device_t dev) memset(0xf0000, 0, 0x10000); #ifdef DEBUG_CN400 - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } #endif } diff --git a/src/northbridge/via/cn400/vgabios.c b/src/northbridge/via/cn400/vgabios.c index 9620debe9b..0b1cff7541 100644 --- a/src/northbridge/via/cn400/vgabios.c +++ b/src/northbridge/via/cn400/vgabios.c @@ -349,17 +349,17 @@ void do_vgabios(void) dev = dev_find_class(PCI_CLASS_DISPLAY_VGA<<8 , 0); if (!dev) { - printk_debug("NO VGA FOUND\n"); + printk(BIOS_DEBUG, "NO VGA FOUND\n"); return; } - printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + printk(BIOS_DEBUG, "found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); /* declare rom address here - keep any config data out of the way * of core LXB stuff */ rom = cbfs_load_optionrom(dev->vendor, dev->device, 0); pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1); - printk_debug("VGA BIOS ROM base address: %x\n", rom); + printk(BIOS_DEBUG, "VGA BIOS ROM base address: %x\n", rom); buf = (unsigned char *) rom; if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { @@ -371,13 +371,13 @@ void do_vgabios(void) buf = (unsigned char *) 0xc0000; if (buf[0]==0x55 && buf[1]==0xAA) { busdevfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; - printk_debug("bus/devfn = %#x\n", busdevfn); + printk(BIOS_DEBUG, "bus/devfn = %#x\n", busdevfn); real_mode_switch_call_vga(busdevfn); } else - printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + printk(BIOS_DEBUG, "Failed to copy VGA BIOS to 0xc0000\n"); } else - printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + printk(BIOS_DEBUG, "BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); pci_write_config32(dev, PCI_ROM_ADDRESS, 0); } @@ -562,28 +562,28 @@ int biosint(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); // cases in a good compiler are just as good as your own tables. switch (intnumber) { case 0 ... 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception %u\n", intnumber); + printk(BIOS_INFO, "biosint: Oops, exception %u\n", intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *) esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *) esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out\n"); + printk(BIOS_DEBUG, "biosint: Bailing out\n"); // "longjmp" vga_exit(); break; @@ -602,7 +602,7 @@ int biosint(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupport int #0x%x\n", + printk(BIOS_INFO, "BIOSINT: Unsupport int #0x%x\n", intnumber); break; } @@ -728,7 +728,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, busdevfn); + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; } else { @@ -754,7 +754,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (! dev) { - printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; retval = -1; @@ -788,14 +788,14 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } diff --git a/src/northbridge/via/cn400/vlink.c b/src/northbridge/via/cn400/vlink.c index 1542af71fe..dc574c130d 100644 --- a/src/northbridge/via/cn400/vlink.c +++ b/src/northbridge/via/cn400/vlink.c @@ -43,7 +43,7 @@ static void vlink_init(device_t dev) u8 reg, reg8; int i, j; - printk_spew("Entering CN400 %s\n", __func__); + printk(BIOS_SPEW, "Entering CN400 %s\n", __func__); /* Disconnect the VLink Before Changing Settings */ reg = pci_read_config8(dev, 0x47); @@ -107,17 +107,17 @@ static void vlink_init(device_t dev) reg &= ~0x04; pci_write_config8(dev, 0x47, reg); - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } #endif } @@ -141,19 +141,19 @@ static void c3_host_init(device_t dev) u8 reg8; int i, j; - printk_spew("Entering CN400 %s\n", __func__); + printk(BIOS_SPEW, "Entering CN400 %s\n", __func__); - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } } @@ -178,19 +178,19 @@ static void c3_err_init(device_t dev) u8 reg8; int i, j; - printk_spew("Entering CN400 %s\n", __func__); + printk(BIOS_SPEW, "Entering CN400 %s\n", __func__); - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } } @@ -214,19 +214,19 @@ static void cn400_pm_init(device_t dev) u8 reg8; int i, j; - printk_spew("Entering CN400 %s\n", __func__); + printk(BIOS_SPEW, "Entering CN400 %s\n", __func__); - printk_spew("%s PCI Header Regs::\n", dev_path(dev)); + printk(BIOS_SPEW, "%s PCI Header Regs::\n", dev_path(dev)); for (i = 0 ; i < 16; i++) { - printk_spew("%02X: ", i*16); + printk(BIOS_SPEW, "%02X: ", i*16); for (j = 0; j < 16; j++) { reg8 = pci_read_config8(dev, j+(i*16)); - printk_spew("%02X ", reg8); + printk(BIOS_SPEW, "%02X ", reg8); } - printk_spew("\n"); + printk(BIOS_SPEW, "\n"); } } diff --git a/src/northbridge/via/cn700/agp.c b/src/northbridge/via/cn700/agp.c index 6ae8e78361..327fac4ea2 100644 --- a/src/northbridge/via/cn700/agp.c +++ b/src/northbridge/via/cn700/agp.c @@ -34,7 +34,7 @@ static void agp_init(device_t dev) u32 reg32; /* Some of this may not be necessary (should be handled by the OS). */ - printk_debug("Enabling AGP.\n"); + printk(BIOS_DEBUG, "Enabling AGP.\n"); /* Allow R/W access to AGP registers. */ pci_write_config8(dev, 0x4d, 0x15); @@ -124,7 +124,7 @@ static const struct pci_driver agp_driver __pci_driver = { */ static void agp_bridge_init(device_t dev) { - printk_debug("Setting up AGP bridge device\n"); + printk(BIOS_DEBUG, "Setting up AGP bridge device\n"); pci_write_config16(dev, 0x4, 0x0007); diff --git a/src/northbridge/via/cn700/northbridge.c b/src/northbridge/via/cn700/northbridge.c index db0a1cfe5d..2be45f7b83 100644 --- a/src/northbridge/via/cn700/northbridge.c +++ b/src/northbridge/via/cn700/northbridge.c @@ -155,7 +155,7 @@ static void pci_domain_set_resources(device_t dev) device_t mc_dev; u32 pci_tolm; - printk_spew("Entering cn700 pci_domain_set_resources.\n"); + printk(BIOS_SPEW, "Entering cn700 pci_domain_set_resources.\n"); pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, @@ -177,7 +177,7 @@ static void pci_domain_set_resources(device_t dev) } tomk = rambits * 64 * 1024; - printk_spew("tomk is 0x%x\n", tomk); + printk(BIOS_SPEW, "tomk is 0x%x\n", tomk); /* Compute the Top Of Low Memory (TOLM), in Kb. */ tolmk = pci_tolm >> 10; if (tolmk >= tomk) { @@ -188,7 +188,7 @@ static void pci_domain_set_resources(device_t dev) #if CONFIG_WRITE_HIGH_TABLES == 1 high_tables_base = (tolmk - CONFIG_VIDEO_MB * 1024 - HIGH_TABLES_SIZE) * 1024; high_tables_size = HIGH_TABLES_SIZE * 1024; - printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); + printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); #endif /* Report the memory regions. */ @@ -229,7 +229,7 @@ static const struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew("In cn700 enable_dev for device %s.\n", dev_path(dev)); + printk(BIOS_SPEW, "In cn700 enable_dev for device %s.\n", dev_path(dev)); /* Set the operations if it is a special bus type. */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { diff --git a/src/northbridge/via/cn700/vga.c b/src/northbridge/via/cn700/vga.c index e4f9d93b6f..283f23dd16 100644 --- a/src/northbridge/via/cn700/vga.c +++ b/src/northbridge/via/cn700/vga.c @@ -54,7 +54,7 @@ static void vga_init(device_t dev) */ memcpy(0xf0000, (0xffffffff - CONFIG_ROM_SIZE - 0xffff), 0x10000); - printk_debug("Initializing VGA\n"); + printk(BIOS_DEBUG, "Initializing VGA\n"); /* Set memory rate to 200 MHz. */ outb(0x3d, CRTM_INDEX); @@ -74,12 +74,12 @@ static void vga_init(device_t dev) pci_write_config32(dev, 0x10, 0xf4000008); pci_write_config32(dev, 0x14, 0xfb000000); - printk_debug("INSTALL REAL-MODE IDT\n"); + printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); - printk_debug("DO THE VGA BIOS\n"); + printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); do_vgabios(); /* VGA seems to work without this, but crash & burn with it. */ - // printk_debug("Enable VGA console\n"); + // printk(BIOS_DEBUG, "Enable VGA console\n"); // vga_enable_console(); /* It's not clear if these need to be programmed before or after diff --git a/src/northbridge/via/cn700/vgabios.c b/src/northbridge/via/cn700/vgabios.c index 82a2bab481..1b3a9f06f8 100644 --- a/src/northbridge/via/cn700/vgabios.c +++ b/src/northbridge/via/cn700/vgabios.c @@ -349,17 +349,17 @@ void do_vgabios(void) dev = dev_find_class(PCI_CLASS_DISPLAY_VGA<<8 , 0); if (!dev) { - printk_debug("NO VGA FOUND\n"); + printk(BIOS_DEBUG, "NO VGA FOUND\n"); return; } - printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + printk(BIOS_DEBUG, "found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); /* declare rom address here - keep any config data out of the way * of core LXB stuff */ rom = cbfs_load_optionrom(dev->vendor, dev->device, 0); pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1); - printk_debug("rom base, size: %x\n", rom); + printk(BIOS_DEBUG, "rom base, size: %x\n", rom); buf = (unsigned char *) rom; if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { @@ -371,13 +371,13 @@ void do_vgabios(void) buf = (unsigned char *) 0xc0000; if (buf[0]==0x55 && buf[1]==0xAA) { busdevfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; - printk_debug("bus/devfn = %#x\n", busdevfn); + printk(BIOS_DEBUG, "bus/devfn = %#x\n", busdevfn); real_mode_switch_call_vga(busdevfn); } else - printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + printk(BIOS_DEBUG, "Failed to copy VGA BIOS to 0xc0000\n"); } else - printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + printk(BIOS_DEBUG, "BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); pci_write_config32(dev, PCI_ROM_ADDRESS, 0); } @@ -562,28 +562,28 @@ int biosint(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); // cases in a good compiler are just as good as your own tables. switch (intnumber) { case 0 ... 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception %u\n", intnumber); + printk(BIOS_INFO, "biosint: Oops, exception %u\n", intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *) esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *) esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out\n"); + printk(BIOS_DEBUG, "biosint: Bailing out\n"); // "longjmp" vga_exit(); break; @@ -602,7 +602,7 @@ int biosint(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupport int #0x%x\n", + printk(BIOS_INFO, "BIOSINT: Unsupport int #0x%x\n", intnumber); break; } @@ -728,7 +728,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, busdevfn); + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; } else { @@ -754,7 +754,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (! dev) { - printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; retval = -1; @@ -788,14 +788,14 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } diff --git a/src/northbridge/via/cx700/cx700_lpc.c b/src/northbridge/via/cx700/cx700_lpc.c index 943838720a..d6495aba61 100644 --- a/src/northbridge/via/cx700/cx700_lpc.c +++ b/src/northbridge/via/cx700/cx700_lpc.c @@ -56,7 +56,7 @@ static unsigned char *pin_to_irq(const unsigned char *pin) static void pci_routing_fixup(struct device *dev) { - printk_debug("%s: device is %p\n", __FUNCTION__, dev); + printk(BIOS_DEBUG, "%s: device is %p\n", __FUNCTION__, dev); /* set up PCI IRQ routing */ pci_write_config8(dev, 0x55, pci_irqs[0] << 4); @@ -64,17 +64,17 @@ static void pci_routing_fixup(struct device *dev) pci_write_config8(dev, 0x57, pci_irqs[3] << 4); /* Assigning IRQs */ - printk_debug("Setting up USB interrupts.\n"); + printk(BIOS_DEBUG, "Setting up USB interrupts.\n"); pci_assign_irqs(0, 0x10, pin_to_irq(usb_pins)); - printk_debug("Setting up VGA interrupts.\n"); + printk(BIOS_DEBUG, "Setting up VGA interrupts.\n"); pci_assign_irqs(1, 0x00, pin_to_irq(vga_pins)); - printk_debug("Setting up PCI slot interrupts.\n"); + printk(BIOS_DEBUG, "Setting up PCI slot interrupts.\n"); pci_assign_irqs(2, 0x04, pin_to_irq(slot_pins)); // more? - printk_debug("Setting up AC97 interrupts.\n"); + printk(BIOS_DEBUG, "Setting up AC97 interrupts.\n"); pci_assign_irqs(0x80, 0x1, pin_to_irq(ac97_pins)); } @@ -169,7 +169,7 @@ static void cx700_set_lpc_registers(struct device *dev) { unsigned char enables; - printk_debug("VIA CX700 LPC bridge init\n"); + printk(BIOS_DEBUG, "VIA CX700 LPC bridge init\n"); // enable the internal I/O decode enables = pci_read_config8(dev, 0x6C); diff --git a/src/northbridge/via/cx700/cx700_sata.c b/src/northbridge/via/cx700/cx700_sata.c index 893126606e..993b05ad0a 100644 --- a/src/northbridge/via/cx700/cx700_sata.c +++ b/src/northbridge/via/cx700/cx700_sata.c @@ -46,7 +46,7 @@ static void sata_init(struct device *dev) { u8 reg8; - printk_debug("Configuring VIA SATA & EIDE Controller\n"); + printk(BIOS_DEBUG, "Configuring VIA SATA & EIDE Controller\n"); /* Class IDE Disk, instead of RAID controller */ reg8 = pci_read_config8(dev, 0x45); @@ -57,7 +57,7 @@ static void sata_init(struct device *dev) pci_write_config8(dev, 0x45, reg8); #if defined(DISABLE_SATA) && (DISABLE_SATA == 1) - printk_info("Disabling SATA (Primary Channel)\n"); + printk(BIOS_INFO, "Disabling SATA (Primary Channel)\n"); /* Disable SATA channels */ pci_write_config8(dev, 0x40, 0x00); #else @@ -132,12 +132,12 @@ static void sata_init(struct device *dev) reg8 &= ~0xa0; pci_write_config8(dev, 0x42, reg8); reg8 = pci_read_config8(dev, 0x42); - printk_debug("Reg 0x42 read back as 0x%x\n", reg8); + printk(BIOS_DEBUG, "Reg 0x42 read back as 0x%x\n", reg8); /* Support Staggered Spin-Up */ reg8 = pci_read_config8(dev, 0xb9); if ((reg8 & 0x8) == 0) { - printk_debug("start OOB sequence on both drives\n"); + printk(BIOS_DEBUG, "start OOB sequence on both drives\n"); reg8 |= 0x30; pci_write_config8(dev, 0xb9, reg8); } diff --git a/src/northbridge/via/cx700/cx700_usb.c b/src/northbridge/via/cx700/cx700_usb.c index b2dc482df3..a85189477f 100644 --- a/src/northbridge/via/cx700/cx700_usb.c +++ b/src/northbridge/via/cx700/cx700_usb.c @@ -28,7 +28,7 @@ static void usb_init(struct device *dev) u8 reg8; /* USB Specification says the device must be Bus Master */ - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); reg32 = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); @@ -37,7 +37,7 @@ static void usb_init(struct device *dev) reg8 |= (1 << 0); pci_write_config8(dev, 0xca, reg8); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static struct device_operations usb_ops = { diff --git a/src/northbridge/via/cx700/cx700_vga.c b/src/northbridge/via/cx700/cx700_vga.c index bcb7d9e8a9..c259b376ad 100644 --- a/src/northbridge/via/cx700/cx700_vga.c +++ b/src/northbridge/via/cx700/cx700_vga.c @@ -49,7 +49,7 @@ void write_protect_vgabios(void) { device_t dev; - printk_debug("write_protect_vgabios\n"); + printk(BIOS_DEBUG, "write_protect_vgabios\n"); dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3324, 0); if (dev) @@ -64,7 +64,7 @@ static void vga_init(device_t dev) { u8 reg8; - printk_debug("Initializing VGA...\n"); + printk(BIOS_DEBUG, "Initializing VGA...\n"); //* pci_write_config8(dev, 0x04, 0x07); @@ -75,10 +75,10 @@ static void vga_init(device_t dev) pci_write_config8(dev, 0x3c, 0x0b); //*/ - printk_debug("Executing VGA option rom in real mode\n"); + printk(BIOS_DEBUG, "Executing VGA option rom in real mode\n"); setup_realmode_idt(); do_vgabios(); - printk_debug("Enable VGA console\n"); + printk(BIOS_DEBUG, "Enable VGA console\n"); vga_enable_console(); /* It's not clear if these need to be programmed before or after diff --git a/src/northbridge/via/cx700/northbridge.c b/src/northbridge/via/cx700/northbridge.c index b08dc17869..6a69d434fb 100644 --- a/src/northbridge/via/cx700/northbridge.c +++ b/src/northbridge/via/cx700/northbridge.c @@ -119,7 +119,7 @@ static void pci_domain_set_resources(device_t dev) #if CONFIG_WRITE_HIGH_TABLES == 1 high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024; high_tables_size = HIGH_TABLES_SIZE* 1024; - printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); + printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); #endif /* Report the memory regions */ diff --git a/src/northbridge/via/cx700/raminit.c b/src/northbridge/via/cx700/raminit.c index e0277f29bb..d28b8e37c4 100644 --- a/src/northbridge/via/cx700/raminit.c +++ b/src/northbridge/via/cx700/raminit.c @@ -26,7 +26,7 @@ /* Debugging macros. */ #if CONFIG_DEBUG_RAM_SETUP -#define PRINTK_DEBUG(x...) printk_debug(x) +#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) #else #define PRINTK_DEBUG(x...) #endif @@ -105,9 +105,9 @@ #define REGISTERPRESET(bus,dev,fun,bdfspec) \ { u8 i, reg; \ for (i=0; i<(sizeof((bdfspec))/sizeof(struct regmask)); i++) { \ - printk_debug("Writing bus " #bus " dev " #dev " fun " #fun " register "); \ - printk_debug("%02x", (bdfspec)[i].reg); \ - printk_debug("\n"); \ + printk(BIOS_DEBUG, "Writing bus " #bus " dev " #dev " fun " #fun " register "); \ + printk(BIOS_DEBUG, "%02x", (bdfspec)[i].reg); \ + printk(BIOS_DEBUG, "\n"); \ reg = pci_read_config8(PCI_DEV((bus), (dev), (fun)), (bdfspec)[i].reg); \ reg &= (bdfspec)[i].mask; \ reg |= (bdfspec)[i].val; \ @@ -184,7 +184,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) regs = pci_read_config8(MEMCTRL, 0x6c); if (regs & (1 << 6)) - printk_debug("DDR2 Detected.\n"); + printk(BIOS_DEBUG, "DDR2 Detected.\n"); else die("ERROR: DDR1 memory detected but not supported by coreboot.\n"); @@ -201,25 +201,25 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 9 SDRAM Cycle Time */ GET_SPD(dimm, spds, regs, 9); - printk_debug("\nDDRII "); + printk(BIOS_DEBUG, "\nDDRII "); if (spds <= 0x3d) { - printk_debug("533"); + printk(BIOS_DEBUG, "533"); val = DDRII_533; t = 38; } else if (spds <= 0x50) { - printk_debug("400"); + printk(BIOS_DEBUG, "400"); val = DDRII_400; t = 50; } else if (spds <= 0x60) { - printk_debug("333"); + printk(BIOS_DEBUG, "333"); val = DDRII_333; t = 60; } else if (spds <= 0x75) { - printk_debug("266"); + printk(BIOS_DEBUG, "266"); val = DDRII_266; t = 75; } else { - printk_debug("200"); + printk(BIOS_DEBUG, "200"); val = DDRII_200; t = 100; } @@ -259,45 +259,45 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 9 18 23 25 CAS Latency NB3DRAM_REG62[2:0] */ /* Read SPD byte 18 CAS Latency */ GET_SPD(dimm, spds, regs, SPD_CAS_LAT); - printk_debug("\nCAS Supported "); + printk(BIOS_DEBUG, "\nCAS Supported "); if (spds & SPD_CAS_LAT_2) - printk_debug("2 "); + printk(BIOS_DEBUG, "2 "); if (spds & SPD_CAS_LAT_3) - printk_debug("3 "); + printk(BIOS_DEBUG, "3 "); if (spds & SPD_CAS_LAT_4) - printk_debug("4 "); + printk(BIOS_DEBUG, "4 "); if (spds & SPD_CAS_LAT_5) - printk_debug("5 "); + printk(BIOS_DEBUG, "5 "); if (spds & SPD_CAS_LAT_6) - printk_debug("6"); + printk(BIOS_DEBUG, "6"); /* We don't consider CAS = 6, because CX700 doesn't support it */ - printk_debug("\n CAS:"); + printk(BIOS_DEBUG, "\n CAS:"); if (spds & SPD_CAS_LAT_5) { - printk_debug("Starting at CL5"); + printk(BIOS_DEBUG, "Starting at CL5"); val = 0x3; /* See whether we can improve it */ GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_1); if ((spds & SPD_CAS_LAT_4) && (tmp < 0x50)) { - printk_debug("\n... going to CL4"); + printk(BIOS_DEBUG, "\n... going to CL4"); val = 0x2; } GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_2); if ((spds & SPD_CAS_LAT_3) && (tmp < 0x50)) { - printk_debug("\n... going to CL3"); + printk(BIOS_DEBUG, "\n... going to CL3"); val = 0x1; } } else { - printk_debug("Starting at CL4"); + printk(BIOS_DEBUG, "Starting at CL4"); val = 0x2; GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_1); if ((spds & SPD_CAS_LAT_3) && (tmp < 0x50)) { - printk_debug("\n... going to CL3"); + printk(BIOS_DEBUG, "\n... going to CL3"); val = 0x1; } GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_2); if ((spds & SPD_CAS_LAT_2) && (tmp < 0x50)) { - printk_debug("\n... going to CL2"); + printk(BIOS_DEBUG, "\n... going to CL2"); val = 0x0; } } @@ -308,7 +308,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 27 Trp NB3DRAM_REG64[3:2] */ GET_SPD(dimm, spds, regs, SPD_TRP); - printk_debug("\nTrp %d", spds); + printk(BIOS_DEBUG, "\nTrp %d", spds); spds >>= 2; for (val = 2; val <= 5; val++) { if (spds <= (val * t / 10)) { @@ -324,7 +324,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 29 Trcd NB3DRAM_REG64[7:6] */ GET_SPD(dimm, spds, regs, SPD_TRCD); - printk_debug("\nTrcd %d", spds); + printk(BIOS_DEBUG, "\nTrcd %d", spds); spds >>= 2; for (val = 2; val <= 5; val++) { if (spds <= (val * t / 10)) { @@ -340,7 +340,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 30 Tras NB3DRAM_REG62[7:4] */ GET_SPD(dimm, spds, regs, SPD_TRAS); - printk_debug("\nTras %d", spds); + printk(BIOS_DEBUG, "\nTras %d", spds); for (val = 5; val <= 20; val++) { if (spds <= (val * t / 10)) { val = val - 5; @@ -355,7 +355,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 42 SPD 40 Trfc NB3DRAM_REG61[5:0] */ GET_SPD(dimm, spds, regs, SPD_TRFC); - printk_debug("\nTrfc %d", spds); + printk(BIOS_DEBUG, "\nTrfc %d", spds); tmp = spds; GET_SPD(dimm, spds, regs, SPD_EX_TRC_TRFC); if (spds & 0x1) @@ -382,7 +382,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) } } val <<= 6; - printk_debug("\nTrrd val = 0x%x", val); + printk(BIOS_DEBUG, "\nTrrd val = 0x%x", val); regs = pci_read_config8(MEMCTRL, 0x63); regs &= ~0xc0; regs |= val; @@ -397,7 +397,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) } } val <<= 6; - printk_debug("\nTwr val = 0x%x", val); + printk(BIOS_DEBUG, "\nTwr val = 0x%x", val); regs = pci_read_config8(MEMCTRL, 0x61); regs &= ~0xc0; @@ -407,13 +407,13 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 37 Twtr NB3DRAM_REG63[1] */ GET_SPD(dimm, spds, regs, SPD_TWTR); spds >>= 2; - printk_debug("\nTwtr 0x%x", spds); + printk(BIOS_DEBUG, "\nTwtr 0x%x", spds); if (spds <= (t * 2 / 10)) val = 0; else val = 1; val <<= 1; - printk_debug("\nTwtr val = 0x%x", val); + printk(BIOS_DEBUG, "\nTwtr val = 0x%x", val); regs = pci_read_config8(MEMCTRL, 0x63); regs &= ~0x2; @@ -423,13 +423,13 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) /* SPD 38 Trtp NB3DRAM_REG63[3] */ GET_SPD(dimm, spds, regs, SPD_TRTP); spds >>= 2; - printk_debug("\nTrtp 0x%x", spds); + printk(BIOS_DEBUG, "\nTrtp 0x%x", spds); if (spds <= (t * 2 / 10)) val = 0; else val = 1; val <<= 3; - printk_debug("\nTrtp val = 0x%x", val); + printk(BIOS_DEBUG, "\nTrtp val = 0x%x", val); regs = pci_read_config8(MEMCTRL, 0x63); regs &= ~0x8; @@ -534,7 +534,7 @@ static void sdram_set_safe_values(const struct mem_controller *ctrl) val += spds; } } - printk_debug("\nchip #%d", val); + printk(BIOS_DEBUG, "\nchip #%d", val); if (val > 18) regs = 0xdb; else @@ -852,7 +852,7 @@ static void step_2_19(const struct mem_controller *ctrl) i |= DDR2_Twr_table[val]; read32(i); - printk_debug("MRS = %08x\n", i); + printk(BIOS_DEBUG, "MRS = %08x\n", i); udelay(15); @@ -1073,7 +1073,7 @@ static void sdram_enable(const struct mem_controller *ctrl) else sdram_clear_vr_addr(ctrl, i); } - printk_debug("\nDQSI Low %08x", dl); + printk(BIOS_DEBUG, "\nDQSI Low %08x", dl); for (dh = dl; dh < 0x3f; dh += 2) { reg8 = dh & 0x3f; reg8 |= 0x80; /* Set Manual Mode */ @@ -1106,7 +1106,7 @@ static void sdram_enable(const struct mem_controller *ctrl) break; } } - printk_debug("\nDQSI High %02x", dh); + printk(BIOS_DEBUG, "\nDQSI High %02x", dh); pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_CHA_DQSI_LOW_REG, dl); pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_CHA_DQSI_HIGH_REG, dh); reg8 = pci_read_config8(MEMCTRL, 0X90) & 0X7; diff --git a/src/northbridge/via/cx700/vgabios.c b/src/northbridge/via/cx700/vgabios.c index 042d99e831..72b841f6f8 100644 --- a/src/northbridge/via/cx700/vgabios.c +++ b/src/northbridge/via/cx700/vgabios.c @@ -315,10 +315,10 @@ void do_vgabios(void) dev = dev_find_class(PCI_CLASS_DISPLAY_VGA << 8, 0); if (!dev) { - printk_debug("NO VGA FOUND\n"); + printk(BIOS_DEBUG, "NO VGA FOUND\n"); return; } - printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + printk(BIOS_DEBUG, "found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); /* declare rom address here - keep any config data out of the way * of core LXB stuff */ @@ -326,7 +326,7 @@ void do_vgabios(void) #warning ROM address hardcoded to 512K rom = (unsigned int)cbfs_load_optionrom(dev->vendor, dev->device, 0); pci_write_config32(dev, PCI_ROM_ADDRESS, rom | 1); - printk_debug("rom base, size: %x\n", rom); + printk(BIOS_DEBUG, "rom base, size: %x\n", rom); buf = (unsigned char *)rom; if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { @@ -339,13 +339,13 @@ void do_vgabios(void) if (buf[0] == 0x55 && buf[1] == 0xAA) { busdevfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; - printk_debug("bus/devfn = %#x\n", busdevfn); + printk(BIOS_DEBUG, "bus/devfn = %#x\n", busdevfn); real_mode_switch_call_vga(busdevfn); } else - printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + printk(BIOS_DEBUG, "Failed to copy VGA BIOS to 0xc0000\n"); } else - printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + printk(BIOS_DEBUG, "BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); pci_write_config32(dev, PCI_ROM_ADDRESS, 0); } @@ -512,28 +512,28 @@ int biosint(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); // cases in a good compiler are just as good as your own tables. switch (intnumber) { case 0 ... 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception %u\n", intnumber); + printk(BIOS_INFO, "biosint: Oops, exception %u\n", intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *)esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *)esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out\n"); + printk(BIOS_DEBUG, "biosint: Bailing out\n"); // "longjmp" vga_exit(); break; @@ -552,7 +552,7 @@ int biosint(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupport int #0x%x\n", intnumber); + printk(BIOS_INFO, "BIOSINT: Unsupport int #0x%x\n", intnumber); break; } if (ret) @@ -669,7 +669,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; @@ -696,8 +696,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (!dev) { - printk_debug - ("0x%x: BAD DEVICE bus %d devfn 0x%x\n", + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; @@ -732,15 +731,14 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug - ("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c index d56456e00e..5af7836a93 100644 --- a/src/northbridge/via/vt8601/northbridge.c +++ b/src/northbridge/via/vt8601/northbridge.c @@ -20,7 +20,7 @@ */ static void northbridge_init(device_t dev) { - printk_spew("VT8601 random fixup ...\n"); + printk(BIOS_SPEW, "VT8601 random fixup ...\n"); pci_write_config8(dev, 0x70, 0xc0); pci_write_config8(dev, 0x71, 0x88); pci_write_config8(dev, 0x72, 0xec); @@ -117,10 +117,10 @@ static void pci_domain_set_resources(device_t dev) if (reg > rambits) rambits = reg; if (reg < rambits) - printk_err("ERROR! register 0x%x is not set!\n", + printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n", ramregs[i]); } - printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); + printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024); tomk = rambits*8*1024; /* Compute the top of Low memory */ tolmk = pci_tolm >> 10; @@ -133,7 +133,7 @@ static void pci_domain_set_resources(device_t dev) #if CONFIG_WRITE_HIGH_TABLES == 1 high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024; high_tables_size = HIGH_TABLES_SIZE* 1024; - printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); + printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); #endif /* Report the memory regions */ diff --git a/src/northbridge/via/vt8623/northbridge.c b/src/northbridge/via/vt8623/northbridge.c index 15910fe74d..fd1c76e5ac 100644 --- a/src/northbridge/via/vt8623/northbridge.c +++ b/src/northbridge/via/vt8623/northbridge.c @@ -27,7 +27,7 @@ static void northbridge_init(device_t dev) unsigned long fb; unsigned char c; - printk_debug("VT8623 random fixup ...\n"); + printk(BIOS_DEBUG, "VT8623 random fixup ...\n"); pci_write_config8(dev, 0x0d, 0x08); pci_write_config8(dev, 0x70, 0x82); pci_write_config8(dev, 0x71, 0xc8); @@ -48,7 +48,7 @@ static void northbridge_init(device_t dev) */ //fb = pci_read_config32(dev, 0x10); /* Base addres of framebuffer */ fb = 0xd0000000; - printk_debug("Frame buffer at %8x\n",fb); + printk(BIOS_DEBUG, "Frame buffer at %8x\n",fb); c = pci_read_config8(dev, 0xe1) & 0xf0; /* size of vga */ c |= fb>>28; /* upper nibble of frame buffer address */ @@ -77,7 +77,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { static void agp_init(device_t dev) { - printk_debug("VT8623 AGP random fixup ...\n"); + printk(BIOS_DEBUG, "VT8623 AGP random fixup ...\n"); pci_write_config8(dev, 0x3e, 0x0c); pci_write_config8(dev, 0x40, 0x83); @@ -107,7 +107,7 @@ static void vga_init(device_t dev) // unsigned long fb; msr_t clocks1,clocks2,instructions,setup; - printk_debug("VGA random fixup ...\n"); + printk(BIOS_DEBUG, "VGA random fixup ...\n"); pci_write_config8(dev, 0x04, 0x07); pci_write_config8(dev, 0x0d, 0x20); pci_write_config32(dev,0x10,0xd8000008); @@ -131,24 +131,24 @@ static void vga_init(device_t dev) //clocks2 = rdmsr(0x10); //instructions = rdmsr(0xc2); - printk_debug("Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); - printk_debug("Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); - printk_debug("Instructions = %08x:%08x\n",instructions.hi,instructions.lo); + printk(BIOS_DEBUG, "Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); + printk(BIOS_DEBUG, "Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); + printk(BIOS_DEBUG, "Instructions = %08x:%08x\n",instructions.hi,instructions.lo); #else /* code to make vga init run in real mode - does work but against the current coreboot philosophy */ - printk_debug("INSTALL REAL-MODE IDT\n"); + printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); - printk_debug("DO THE VGA BIOS\n"); + printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); do_vgabios(); //clocks2 = rdmsr(0x10); //instructions = rdmsr(0xc2); - //printk_debug("Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); - //printk_debug("Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); - //printk_debug("Instructions = %08x:%08x\n",instructions.hi,instructions.lo); + //printk(BIOS_DEBUG, "Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); + //printk(BIOS_DEBUG, "Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); + //printk(BIOS_DEBUG, "Instructions = %08x:%08x\n",instructions.hi,instructions.lo); vga_enable_console(); @@ -229,7 +229,7 @@ static void pci_domain_set_resources(device_t dev) device_t mc_dev; uint32_t pci_tolm; - printk_spew("Entering vt8623 pci_domain_set_resources.\n"); + printk(BIOS_SPEW, "Entering vt8623 pci_domain_set_resources.\n"); pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; @@ -250,10 +250,10 @@ static void pci_domain_set_resources(device_t dev) if (reg > rambits) rambits = reg; if (reg < rambits) - printk_err("ERROR! register 0x%x is not set!\n", + printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n", ramregs[i]); } - printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*16*1024); + printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*16*1024); tomk = rambits*16*1024 - 32768; /* Compute the top of Low memory */ tolmk = pci_tolm >> 10; @@ -266,7 +266,7 @@ static void pci_domain_set_resources(device_t dev) #if CONFIG_WRITE_HIGH_TABLES == 1 high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024; high_tables_size = HIGH_TABLES_SIZE* 1024; - printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); + printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size); #endif /* Report the memory regions */ @@ -304,7 +304,7 @@ static struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew("In vt8623 enable_dev for device %s.\n", dev_path(dev)); + printk(BIOS_SPEW, "In vt8623 enable_dev for device %s.\n", dev_path(dev)); /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c index c04da9cbc8..08d3c95048 100644 --- a/src/northbridge/via/vx800/examples/chipset_init.c +++ b/src/northbridge/via/vx800/examples/chipset_init.c @@ -261,7 +261,7 @@ void AcpiInit(void) // Get SB Revision sbchiprev = pci_rawread_config8(rawdevice, 0xf6); - printk_debug("SB chip revision =%x\n", sbchiprev); + printk(BIOS_DEBUG, "SB chip revision =%x\n", sbchiprev); // Fill Register Table via_pci_inittable(sbchiprev, mSbStage1InitTbl); @@ -279,7 +279,7 @@ void Stage2NbInit(void) u32 subid = 0; rawdevice = PCI_RAWDEV(0, 0, 4); nbchiprev = pci_rawread_config8(rawdevice, 0xf6); - printk_debug("NB chip revision =%x\n", nbchiprev); + printk(BIOS_DEBUG, "NB chip revision =%x\n", nbchiprev); via_pci_inittable(nbchiprev, mNbStage2InitTable); @@ -414,7 +414,7 @@ void InitEHCI(u8 Number, u8 bEnable) // Get Chipset Revision EHCIRevision = pci_rawread_config8(PCI_RAWDEV(0, 0x10, 4), 0xF6); - printk_debug("EHCI Revision =%x\n", EHCIRevision); + printk(BIOS_DEBUG, "EHCI Revision =%x\n", EHCIRevision); via_pci_inittable(EHCIRevision, mEHCIInitTable); } } @@ -567,7 +567,7 @@ void Stage2SbInit(void) rawdevice = PCI_RAWDEV(0, 11, 0); sbchiprev = pci_rawread_config8(rawdevice, 0xf6); - printk_debug("SB chip revision =%x\n", sbchiprev); + printk(BIOS_DEBUG, "SB chip revision =%x\n", sbchiprev); //SBBasicInit via_pci_inittable(sbchiprev, mBusControllerInitTable); @@ -592,7 +592,7 @@ void Stage2SbInit(void) void init_VIA_chipset(void) { - printk_debug("In: init_VIA_chipset\n"); + printk(BIOS_DEBUG, "In: init_VIA_chipset\n"); //1.nbstage1 is done in raminit. //2.sbstage1 AcpiInit(); @@ -604,7 +604,7 @@ void init_VIA_chipset(void) //5.open hdac pci_rawmodify_config32(PCI_RAWDEV(0, 0x11, 7), 0xd1, 0, 0x04); - printk_debug("End: init_VIA_chipset\n"); + printk(BIOS_DEBUG, "End: init_VIA_chipset\n"); } /** @@ -630,7 +630,7 @@ void hardwaremain(int boot_complete) u8 y, x; init_VIA_chipset(); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); #if 0 @@ -653,90 +653,90 @@ void hardwaremain(int boot_complete) //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb - printk_info("=================SB 50h=%02x \n", + printk(BIOS_INFO, "=================SB 50h=%02x \n", pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50)); /* FIXME: Is there a better way to handle this? */ init_timer(); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); /* Find the devices we don't have hard coded knowledge about. */ dev_enumerate(); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); #if 0 x = y = 0; - printk_info("dump ehci3 \n"); + printk(BIOS_INFO, "dump ehci3 \n"); for (; x < 16; x++) { y = 0; for (; y < 16; y++) { - printk_info("%02x ", + printk(BIOS_INFO, "%02x ", pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } - printk_info("\n"); + printk(BIOS_INFO, "\n"); } #endif post_code(0x66); /* Now compute and assign the bus resources. */ dev_configure(); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); #if 0 x = y = 0; - printk_info("dump ehci3 \n"); + printk(BIOS_INFO, "dump ehci3 \n"); for (; x < 16; x++) { y = 0; for (; y < 16; y++) { - printk_info("%02x ", + printk(BIOS_INFO, "%02x ", pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } - printk_info("\n"); + printk(BIOS_INFO, "\n"); } #endif post_code(0x88); /* Now actually enable devices on the bus */ dev_enable(); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); /* And of course initialize devices on the bus */ #if 0 x = y = 0; - printk_info("dump ehci3 \n"); + printk(BIOS_INFO, "dump ehci3 \n"); for (; x < 16; x++) { y = 0; for (; y < 16; y++) { - printk_info("%02x ", + printk(BIOS_INFO, "%02x ", pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } - printk_info("\n"); + printk(BIOS_INFO, "\n"); } #endif dev_initialize(); post_code(0x89); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); // pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571); #if 0 x = y = 0; - printk_info("dump ehci3 \n"); + printk(BIOS_INFO, "dump ehci3 \n"); for (; x < 16; x++) { y = 0; for (; y < 16; y++) { - printk_info("%02x ", + printk(BIOS_INFO, "%02x ", pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } - printk_info("\n"); + printk(BIOS_INFO, "\n"); } #endif @@ -1265,25 +1265,25 @@ for(i=0;i<5;i++){ #if 1 struct device *dev; - printk_info("=========zjldump all devices...\n"); + printk(BIOS_INFO, "=========zjldump all devices...\n"); for (dev = all_devices; dev; dev = dev->next) { if (dev->path.type == DEVICE_PATH_PCI) { - printk_debug("%s dump\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s dump\n", dev_path(dev)); x = y = 0; for (; x < 16; x++) { y = 0; for (; y < 16; y++) { - printk_info("%02x ", + printk(BIOS_INFO, "%02x ", pci_read_config8(dev, x * 16 + y)); } - printk_info("\n"); + printk(BIOS_INFO, "\n"); } } - printk_info("\n"); + printk(BIOS_INFO, "\n"); } #endif diff --git a/src/northbridge/via/vx800/examples/romstage.c b/src/northbridge/via/vx800/examples/romstage.c index c1de3f3dc2..c7efb51791 100644 --- a/src/northbridge/via/vx800/examples/romstage.c +++ b/src/northbridge/via/vx800/examples/romstage.c @@ -574,7 +574,7 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav __asm__ volatile ("movl %%esp, %0\n\t":"=a" (v_esp) ); #if CONFIG_USE_INIT - printk_debug("v_esp=%08x\r\n", v_esp); + printk(BIOS_DEBUG, "v_esp=%08x\r\n", v_esp); #else print_debug("v_esp="); print_debug_hex32(v_esp); @@ -590,7 +590,7 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav //stack cpu_reset = 0; #if CONFIG_USE_INIT - printk_debug("cpu_reset = %08x\r\n", cpu_reset); + printk(BIOS_DEBUG, "cpu_reset = %08x\r\n", cpu_reset); #else print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); @@ -642,7 +642,7 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav print_debug("Use Ram as Stack now - \r\n"); } #if CONFIG_USE_INIT - printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); + printk(BIOS_DEBUG, "new_cpu_reset = %08x\r\n", new_cpu_reset); #else print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); diff --git a/src/northbridge/via/vx800/northbridge.c b/src/northbridge/via/vx800/northbridge.c index d1f60635bb..9ec54da399 100644 --- a/src/northbridge/via/vx800/northbridge.c +++ b/src/northbridge/via/vx800/northbridge.c @@ -126,7 +126,7 @@ static void pci_domain_set_resources(device_t dev) u32 pci_tolm; u8 reg; - printk_spew("Entering vx800 pci_domain_set_resources.\n"); + printk(BIOS_SPEW, "Entering vx800 pci_domain_set_resources.\n"); pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, @@ -162,7 +162,7 @@ if register with invalid value we set frame buffer size to 32M for default, but (((rambits << 6) - (4 << reg) - VIACONFIG_TOP_SM_SIZE_MB) * 1024); - printk_spew("tomk is 0x%x\n", tomk); + printk(BIOS_SPEW, "tomk is 0x%x\n", tomk); /* Compute the Top Of Low Memory, in Kb */ tolmk = pci_tolm >> 10; if (tolmk >= tomk) { @@ -206,7 +206,7 @@ static const struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - printk_spew("In VX800 enable_dev for device %s.\n", dev_path(dev)); + printk(BIOS_SPEW, "In VX800 enable_dev for device %s.\n", dev_path(dev)); /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { diff --git a/src/northbridge/via/vx800/vga.c b/src/northbridge/via/vx800/vga.c index 732963de46..58d70c33c3 100644 --- a/src/northbridge/via/vx800/vga.c +++ b/src/northbridge/via/vx800/vga.c @@ -53,7 +53,7 @@ void write_protect_vgabios(void) { device_t dev; - printk_info("write_protect_vgabios\n"); + printk(BIOS_INFO, "write_protect_vgabios\n"); /* there are two possible devices. Just do both. */ dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_MEMCTRL, 0); @@ -85,16 +85,16 @@ static void vga_init(device_t dev) pci_write_config32(dev, 0x14, VIACONFIG_VGA_PCI_14); pci_write_config8(dev, 0x3c, 0x0a); //same with vx855_lpc.c //*/ - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); #if 1 - printk_debug("INSTALL REAL-MODE IDT\n"); + printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); - printk_debug("DO THE VGA BIOS\n"); + printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); do_vgabios(); if ((acpi_sleep_type == 3)/* || (PAYLOAD_IS_SEABIOS == 0)*/) { - printk_debug("Enable VGA console\n"); + printk(BIOS_DEBUG, "Enable VGA console\n"); // remove this function since in cn700 it is said "VGA seems to work without this, but crash & burn with it" //but the existense of vga_enable_console() seems do not hurt my coreboot. XP+ubuntu s3 can resume with and without this function. //and remove it also do not help my s3 problem: desktop screen have some thin black line, after resuming back to win. @@ -102,7 +102,7 @@ static void vga_init(device_t dev) } #else /* Attempt to manually force the rom to load */ - printk_debug("Forcing rom load\r\n"); + printk(BIOS_DEBUG, "Forcing rom load\r\n"); pci_rom_load(dev, 0xfff80000); run_bios(dev, 0xc0000); #endif @@ -122,7 +122,7 @@ static void vga_init(device_t dev) outb(0x39, SR_INDEX); outb(reg8, SR_DATA); */ } - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); } diff --git a/src/northbridge/via/vx800/vgabios.c b/src/northbridge/via/vx800/vgabios.c index b536b5825d..2a99b9c4c7 100644 --- a/src/northbridge/via/vx800/vgabios.c +++ b/src/northbridge/via/vx800/vgabios.c @@ -302,7 +302,7 @@ void do_vgabios(void) u16 tmp; u8 tmp8; - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); /* clear vga bios data area */ for (i = 0x400; i < 0x500; i++) { @@ -312,24 +312,24 @@ void do_vgabios(void) dev = dev_find_class(PCI_CLASS_DISPLAY_VGA << 8, 0); if (!dev) { - printk_debug("NO VGA FOUND\n"); + printk(BIOS_DEBUG, "NO VGA FOUND\n"); return; } - printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); + printk(BIOS_DEBUG, "found VGA: vid=%x, did=%x\n", dev->vendor, dev->device); /* declare rom address here - keep any config data out of the way * of core LXB stuff */ rom = cbfs_load_optionrom(dev->vendor, dev->device, 0); pci_write_config32(dev, PCI_ROM_ADDRESS, rom | 1); - printk_debug("rom base: %x\n", rom); + printk(BIOS_DEBUG, "rom base: %x\n", rom); buf = (unsigned char *)rom; - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { memcpy((void *)0xc0000, buf, size); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); write_protect_vgabios(); // in northbridge @@ -338,14 +338,14 @@ void do_vgabios(void) if (buf[0] == 0x55 && buf[1] == 0xAA) { busdevfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; - printk_debug("bus/devfn = %#x\n", busdevfn); + printk(BIOS_DEBUG, "bus/devfn = %#x\n", busdevfn); real_mode_switch_call_vga(busdevfn); } else - printk_debug("Failed to copy VGA BIOS to 0xc0000\n"); + printk(BIOS_DEBUG, "Failed to copy VGA BIOS to 0xc0000\n"); } else - printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + printk(BIOS_DEBUG, "BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); - printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); pci_write_config32(dev, PCI_ROM_ADDRESS, 0); } @@ -513,12 +513,12 @@ int biosint(unsigned long intnumber, cs = cs_ip >> 16; flags = stackflags; - printk_debug("biosint: INT# 0x%lx\n", intnumber); - printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); + printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", eax, ebx, ecx, edx); - printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", ebp, esp, edi, esi); - printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", ip, cs, flags); // cases in a good compiler are just as good as your own tables. @@ -527,16 +527,16 @@ int biosint(unsigned long intnumber, case 6: case 7: case 8: case 9: case 10: case 11: case 12: case 13: case 14: case 15: // These are not BIOS service, but the CPU-generated exceptions - printk_info("biosint: Oops, exception %u\n", intnumber); + printk(BIOS_INFO, "biosint: Oops, exception %u\n", intnumber); if (esp < 0x1000) { - printk_debug("Stack contents: "); + printk(BIOS_DEBUG, "Stack contents: "); while (esp < 0x1000) { - printk_debug("0x%04x ", *(unsigned short *)esp); + printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *)esp); esp += 2; } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } - printk_debug("biosint: Bailing out\n"); + printk(BIOS_DEBUG, "biosint: Bailing out\n"); // "longjmp" if ((acpi_sleep_type == 3)/* || (PAYLOAD_IS_SEABIOS == 0)*/) // add this to keep same with kevin's seabios patch in 2008-9-8 vga_exit(); @@ -556,7 +556,7 @@ int biosint(unsigned long intnumber, &ebx, &edx, &ecx, &eax, &flags); break; default: - printk_info("BIOSINT: Unsupport int #0x%x\n", intnumber); + printk(BIOS_INFO, "BIOSINT: Unsupport int #0x%x\n", intnumber); break; } if (ret) @@ -686,7 +686,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, // devfn is an int, so we mask it off. busdevfn = (dev->bus->secondary << 8) | (dev->path.pci.devfn & 0xff); - printk_debug("0x%x: return 0x%x\n", func, + printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn); *pebx = busdevfn; retval = 0; @@ -713,8 +713,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, reg = *pedi; dev = dev_find_slot(bus, devfn); if (!dev) { - printk_debug - ("0x%x: BAD DEVICE bus %d devfn 0x%x\n", + printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn); // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! *peax = PCIBIOS_BADREG; @@ -749,15 +748,14 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, if (retval) retval = PCIBIOS_BADREG; - printk_debug - ("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", func, bus, devfn, reg, *pecx); *peax = 0; retval = 0; } break; default: - printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); break; } diff --git a/src/northbridge/via/vx800/vx800_ide.c b/src/northbridge/via/vx800/vx800_ide.c index 673d6152ad..b3d6bc2c02 100644 --- a/src/northbridge/via/vx800/vx800_ide.c +++ b/src/northbridge/via/vx800/vx800_ide.c @@ -169,7 +169,7 @@ static void ide_init(struct device *dev) uint8_t enables, Rx89, RxC0; u8 i, data; struct ATA_REG_INIT_TABLE *pEntry; - printk_info("ide_init\n"); + printk(BIOS_INFO, "ide_init\n"); #if 1 /*these 3 lines help to keep interl back door for DID VID SUBID untouched */ @@ -207,14 +207,14 @@ static void ide_init(struct device *dev) enables |= 0x02; pci_write_config8(dev, IDE_CS, enables); enables = pci_read_config8(dev, IDE_CS); - printk_debug("Enables in reg 0x40 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "Enables in reg 0x40 read back as 0x%x\n", enables); /* Enable only compatibility mode. */ enables = pci_read_config8(dev, IDE_CONF_II); enables &= ~0xc0; pci_write_config8(dev, IDE_CONF_II, enables); enables = pci_read_config8(dev, IDE_CONF_II); - printk_debug("Enables in reg 0x42 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "Enables in reg 0x42 read back as 0x%x\n", enables); /* Enable prefetch buffers. */ enables = pci_read_config8(dev, IDE_CONF_I); diff --git a/src/northbridge/via/vx800/vx800_lpc.c b/src/northbridge/via/vx800/vx800_lpc.c index 2a4550ab45..7a74b65d3d 100644 --- a/src/northbridge/via/vx800/vx800_lpc.c +++ b/src/northbridge/via/vx800/vx800_lpc.c @@ -58,7 +58,7 @@ static unsigned char *pin_to_irq(const unsigned char *pin) static void pci_routing_fixup(struct device *dev) { - printk_info("%s: dev is %p\n", __FUNCTION__, dev); + printk(BIOS_INFO, "%s: dev is %p\n", __FUNCTION__, dev); /* set up PCI IRQ routing */ pci_write_config8(dev, 0x55, pciIrqs[0] << 4); @@ -66,42 +66,42 @@ static void pci_routing_fixup(struct device *dev) pci_write_config8(dev, 0x57, pciIrqs[3] << 4); /* VGA */ - printk_info("setting vga\n"); + printk(BIOS_INFO, "setting vga\n"); pci_assign_irqs(0, 0x1, pin_to_irq(vgaPins)); /* PCI slot */ - printk_info("setting pci slot\n"); + printk(BIOS_INFO, "setting pci slot\n"); pci_assign_irqs(0, 0x08, pin_to_irq(slotPins)); /* PCI slot */ - printk_info("setting USB Device Controller\n"); + printk(BIOS_INFO, "setting USB Device Controller\n"); pci_assign_irqs(0, 0x0b, pin_to_irq(usbdevicePins)); /* PCI slot */ - printk_info("setting SDIO Controller\n"); + printk(BIOS_INFO, "setting SDIO Controller\n"); pci_assign_irqs(0, 0x0c, pin_to_irq(sdioPins)); /* PCI slot */ - printk_info("setting SD $ MS Controller\n"); + printk(BIOS_INFO, "setting SD $ MS Controller\n"); pci_assign_irqs(0, 0x0d, pin_to_irq(sd_ms_ctrl_Pins)); /* PCI slot */ - printk_info("setting CE-ATA NF Controller(Card Boot)\n"); + printk(BIOS_INFO, "setting CE-ATA NF Controller(Card Boot)\n"); pci_assign_irqs(0, 0x0e, pin_to_irq(ce_ata_nf_ctrl_Pins)); /* PCI slot */ - printk_info("setting ide\n"); + printk(BIOS_INFO, "setting ide\n"); //pci_assign_irqs(0, 0x0f, pin_to_irq(idePins)); /* Standard usb components */ - printk_info("setting usb1-2\n"); + printk(BIOS_INFO, "setting usb1-2\n"); // pci_assign_irqs(0, 0x10, pin_to_irq(usbPins)); /* sound hardware */ - printk_info("setting hdac audio\n"); + printk(BIOS_INFO, "setting hdac audio\n"); pci_assign_irqs(0, 0x14, pin_to_irq(hdacaudioPins)); - printk_spew("%s: DONE\n", __FUNCTION__); + printk(BIOS_SPEW, "%s: DONE\n", __FUNCTION__); } void setup_pm(device_t dev) @@ -335,7 +335,7 @@ void vx800_enable_resources(device_t dev) static void southbridge_init(struct device *dev) { - printk_debug("vx800 sb init\n"); + printk(BIOS_DEBUG, "vx800 sb init\n"); vx800_sb_init(dev); pci_routing_fixup(dev); @@ -343,8 +343,7 @@ static void southbridge_init(struct device *dev) /* turn on keyboard and RTC, no need to visit this reg twice */ pc_keyboard_init(0); - printk_debug - ("ps2 usb lid, you set who can wakeup system from s3 sleep\n"); + printk(BIOS_DEBUG, "ps2 usb lid, you set who can wakeup system from s3 sleep\n"); S3_ps2_kb_ms_wakeup(dev); S3_usb_wakeup(dev); diff --git a/src/pc80/i8259.c b/src/pc80/i8259.c index 1361f379c0..330b7c6428 100644 --- a/src/pc80/i8259.c +++ b/src/pc80/i8259.c @@ -113,26 +113,26 @@ void i8259_configure_irq_trigger(int int_num, int is_level_triggered) { u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8); - printk_spew("%s: current interrupts are 0x%x\n", __func__, int_bits); + printk(BIOS_SPEW, "%s: current interrupts are 0x%x\n", __func__, int_bits); if (is_level_triggered) int_bits |= (1 << int_num); else int_bits &= ~(1 << int_num); /* Write new values */ - printk_spew("%s: try to set interrupts 0x%x\n", __func__, int_bits); + printk(BIOS_SPEW, "%s: try to set interrupts 0x%x\n", __func__, int_bits); outb((u8)(int_bits & 0xff), ELCR1); outb((u8)(int_bits >> 8), ELCR2); #ifdef PARANOID_IRQ_TRIGGERS /* Try reading back the new values. This seems like an error but is not ... */ if (inb(ELCR1) != (int_bits & 0xff)) { - printk_err("%s: lower order bits are wrong: want 0x%x, got 0x%x\n", + printk(BIOS_ERR, "%s: lower order bits are wrong: want 0x%x, got 0x%x\n", __func__, (int_bits & 0xff), inb(ELCR1)); } if (inb(ELCR2) != (int_bits >> 8)) { - printk_err("%s: higher order bits are wrong: want 0x%x, got 0x%x\n", + printk(BIOS_ERR, "%s: higher order bits are wrong: want 0x%x, got 0x%x\n", __func__, (int_bits>>8), inb(ELCR2)); } #endif diff --git a/src/pc80/keyboard.c b/src/pc80/keyboard.c index 6b80620695..32e2576fac 100644 --- a/src/pc80/keyboard.c +++ b/src/pc80/keyboard.c @@ -71,7 +71,7 @@ static int kbc_input_buffer_empty(void) } if (!timeout) { - printk_warning("Unexpected Keyboard controller input buffer full\n"); + printk(BIOS_WARNING, "Unexpected Keyboard controller input buffer full\n"); } return !!timeout; } @@ -85,7 +85,7 @@ static int kbc_output_buffer_full(void) } if (!timeout) { - printk_warning("Keyboard controller output buffer result timeout\n"); + printk(BIOS_WARNING, "Keyboard controller output buffer result timeout\n"); } return !!timeout; } @@ -100,8 +100,8 @@ static int kbc_cleanup_buffers(void) } if (!timeout) { - printk_err("Couldn't cleanup the keyboard controller buffers\n"); - printk_err("Status (0x%x): 0x%x, Buffer (0x%x): 0x%x\n", + printk(BIOS_ERR, "Couldn't cleanup the keyboard controller buffers\n"); + printk(BIOS_ERR, "Status (0x%x): 0x%x, Buffer (0x%x): 0x%x\n", KBD_STATUS, inb(KBD_STATUS), KBD_DATA, inb(KBD_DATA)); } @@ -123,7 +123,7 @@ static int kbc_self_test(void) if (!kbc_output_buffer_full()) { /* There probably is no keyboard controller. */ - printk_err("Could not reset keyboard controller.\n"); + printk(BIOS_ERR, "Could not reset keyboard controller.\n"); return 0; } @@ -131,7 +131,7 @@ static int kbc_self_test(void) self_test = inb(KBD_DATA); if (self_test != 0x55) { - printk_err("Keyboard Controller self-test failed: 0x%x\n", + printk(BIOS_ERR, "Keyboard Controller self-test failed: 0x%x\n", self_test); return 0; } @@ -148,7 +148,7 @@ static u8 send_keyboard(u8 command) if (!kbc_input_buffer_empty()) return 0; outb(command, KBD_DATA); if (!kbc_output_buffer_full()) { - printk_err("Could not send keyboard command %02x\n", + printk(BIOS_ERR, "Could not send keyboard command %02x\n", command); return 0; } @@ -162,7 +162,7 @@ static u8 send_keyboard(u8 command) void pc_keyboard_init(struct pc_keyboard *keyboard) { u8 regval; - printk_debug("Keyboard init...\n"); + printk(BIOS_DEBUG, "Keyboard init...\n"); /* Run a keyboard controller self-test */ if (!kbc_self_test()) @@ -174,7 +174,7 @@ void pc_keyboard_init(struct pc_keyboard *keyboard) if (!kbc_input_buffer_empty()) return; outb(0x20, KBD_DATA); /* send cmd: enable keyboard */ if (!kbc_input_buffer_empty()) { - printk_info("Timeout while enabling keyboard\n"); + printk(BIOS_INFO, "Timeout while enabling keyboard\n"); return; } @@ -185,23 +185,23 @@ void pc_keyboard_init(struct pc_keyboard *keyboard) regval = send_keyboard(0xFF); if (regval == KBD_REPLY_RESEND) { /* keeps sending RESENDs, probably no keyboard. */ - printk_info("No PS/2 keyboard detected.\n"); + printk(BIOS_INFO, "No PS/2 keyboard detected.\n"); return; } if (regval != KBD_REPLY_ACK) { - printk_err("Keyboard selftest failed ACK: 0x%x\n", regval); + printk(BIOS_ERR, "Keyboard selftest failed ACK: 0x%x\n", regval); return; } if (!kbc_output_buffer_full()) { - printk_err("Timeout waiting for keyboard after reset.\n"); + printk(BIOS_ERR, "Timeout waiting for keyboard after reset.\n"); return; } regval = inb(KBD_DATA); if (regval != 0xAA) { - printk_err("Keyboard selftest failed: 0x%x\n", regval); + printk(BIOS_ERR, "Keyboard selftest failed: 0x%x\n", regval); return; } @@ -213,27 +213,27 @@ void pc_keyboard_init(struct pc_keyboard *keyboard) /* disable the keyboard */ regval = send_keyboard(0xF5); if (regval != KBD_REPLY_ACK) { - printk_err("Keyboard disable failed ACK: 0x%x\n", regval); + printk(BIOS_ERR, "Keyboard disable failed ACK: 0x%x\n", regval); return; } /* Set scancode command */ regval = send_keyboard(0xF0); if (regval != KBD_REPLY_ACK) { - printk_err("Keyboard set scancode cmd failed ACK: 0x%x\n", regval); + printk(BIOS_ERR, "Keyboard set scancode cmd failed ACK: 0x%x\n", regval); return; } /* Set scancode mode 2 */ regval = send_keyboard(0x02); if (regval != KBD_REPLY_ACK) { - printk_err("Keyboard set scancode mode failed ACK: 0x%x\n", regval); + printk(BIOS_ERR, "Keyboard set scancode mode failed ACK: 0x%x\n", regval); return; } /* enable the keyboard */ regval = send_keyboard(0xF4); if (regval != KBD_REPLY_ACK) { - printk_err("Keyboard enable failed ACK: 0x%x\n", regval); + printk(BIOS_ERR, "Keyboard enable failed ACK: 0x%x\n", regval); return; } @@ -243,7 +243,7 @@ void pc_keyboard_init(struct pc_keyboard *keyboard) if (!kbc_input_buffer_empty()) return; outb(0x61, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */ if (kbc_output_buffer_full()) { - printk_err("Timeout during final keyboard enable\n"); + printk(BIOS_ERR, "Timeout during final keyboard enable\n"); return; } } diff --git a/src/pc80/mc146818rtc.c b/src/pc80/mc146818rtc.c index e318167b42..9251f7924d 100644 --- a/src/pc80/mc146818rtc.c +++ b/src/pc80/mc146818rtc.c @@ -140,7 +140,7 @@ void rtc_init(int invalid) int cmos_invalid, checksum_invalid; #endif - printk_debug("RTC Init\n"); + printk(BIOS_DEBUG, "RTC Init\n"); #if CONFIG_HAVE_OPTION_TABLE /* See if there has been a CMOS power problem. */ @@ -152,7 +152,7 @@ void rtc_init(int invalid) PC_CKS_RANGE_END,PC_CKS_LOC); if (invalid || cmos_invalid || checksum_invalid) { - printk_warning("RTC:%s%s%s zeroing cmos\n", + printk(BIOS_WARNING, "RTC:%s%s%s zeroing cmos\n", invalid?" Clear requested":"", cmos_invalid?" Power Problem":"", checksum_invalid?" Checksum invalid":""); @@ -188,7 +188,7 @@ void rtc_init(int invalid) checksum_invalid = !rtc_checksum_valid(CONFIG_LB_CKS_RANGE_START, CONFIG_LB_CKS_RANGE_END,CONFIG_LB_CKS_LOC); if(checksum_invalid) - printk_debug("Invalid CMOS LB checksum\n"); + printk(BIOS_DEBUG, "Invalid CMOS LB checksum\n"); /* Make certain we have a valid checksum */ rtc_set_checksum(PC_CKS_RANGE_START, @@ -257,7 +257,7 @@ int get_option(void *dest, const char *name) } } if(!found) { - printk_debug("WARNING: No cmos option '%s'\n", name); + printk(BIOS_DEBUG, "WARNING: No cmos option '%s'\n", name); return(-2); } diff --git a/src/southbridge/amd/amd8111/amd8111_acpi.c b/src/southbridge/amd/amd8111/amd8111_acpi.c index 67a789c08a..32e3808a98 100644 --- a/src/southbridge/amd/amd8111/amd8111_acpi.c +++ b/src/southbridge/amd/amd8111/amd8111_acpi.c @@ -79,7 +79,7 @@ static void acpi_init(struct device *dev) #if 0 uint16_t word; - printk_debug("ACPI: disabling NMI watchdog.. "); + printk(BIOS_DEBUG, "ACPI: disabling NMI watchdog.. "); byte = pci_read_config8(dev, 0x49); pci_write_config8(dev, 0x49, byte | (1<<2)); @@ -91,13 +91,13 @@ static void acpi_init(struct device *dev) byte = pci_read_config8(dev, 0x48); pci_write_config8(dev, 0x48, byte | (1<<3)); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); - printk_debug("ACPI: Routing IRQ 12 to PS2 port.. "); + printk(BIOS_DEBUG, "ACPI: Routing IRQ 12 to PS2 port.. "); word = pci_read_config16(dev, 0x46); pci_write_config16(dev, 0x46, word | (1<<9)); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif /* To enable the register 0xcf9 in the IO space @@ -119,7 +119,7 @@ static void acpi_init(struct device *dev) byte |= 0x40; } pci_write_config8(dev, PREVIOUS_POWER_STATE, byte); - printk_info("set power %s after power fail\n", on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", on?"on":"off"); /* switch serial irq logic from quiet mode to continuous * mode for Winbond W83627HF Rev. 17 @@ -135,13 +135,13 @@ static void acpi_init(struct device *dev) outl(((on<<1)+0x10) ,(pm10_bar + 0x10)); dword = inl(pm10_bar + 0x10); on = 8-on; - printk_debug("Throttling CPU %2d.%1.1d percent.\n", + printk(BIOS_DEBUG, "Throttling CPU %2d.%1.1d percent.\n", (on*12)+(on>>1),(on&1)*5); } #if CONFIG_GENERATE_ACPI_TABLES == 1 pm_base = pci_read_config16(dev, 0x58) & 0xff00; - printk_debug("pm_base: 0x%04x\n",pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n",pm_base); #endif } diff --git a/src/southbridge/amd/amd8111/amd8111_ide.c b/src/southbridge/amd/amd8111/amd8111_ide.c index 6a1fd553b2..3b6f5a0a65 100644 --- a/src/southbridge/amd/amd8111/amd8111_ide.c +++ b/src/southbridge/amd/amd8111/amd8111_ide.c @@ -19,12 +19,12 @@ static void ide_init(struct device *dev) if (conf->ide1_enable) { /* Enable secondary ide interface */ word |= (1<<0); - printk_debug("IDE1 "); + printk(BIOS_DEBUG, "IDE1 "); } if (conf->ide0_enable) { /* Enable primary ide interface */ word |= (1<<1); - printk_debug("IDE0 "); + printk(BIOS_DEBUG, "IDE0 "); } word |= (1<<12); diff --git a/src/southbridge/amd/amd8111/amd8111_lpc.c b/src/southbridge/amd/amd8111/amd8111_lpc.c index edb32c240c..85e217bb65 100644 --- a/src/southbridge/amd/amd8111/amd8111_lpc.c +++ b/src/southbridge/amd/amd8111/amd8111_lpc.c @@ -22,7 +22,7 @@ static void enable_hpet(struct device *dev) pci_write_config32(dev,0xa0, 0xfed00001); hpet_address = pci_read_config32(dev,0xa0)& 0xfffffffe; - printk_debug("enabling HPET @0x%lx\n", hpet_address); + printk(BIOS_DEBUG, "enabling HPET @0x%lx\n", hpet_address); } diff --git a/src/southbridge/amd/amd8111/amd8111_nic.c b/src/southbridge/amd/amd8111/amd8111_nic.c index aa06253a46..8818b51b40 100644 --- a/src/southbridge/amd/amd8111/amd8111_nic.c +++ b/src/southbridge/amd/amd8111/amd8111_nic.c @@ -52,7 +52,7 @@ static void nic_init(struct device *dev) mmio = resource->base; /* Hard Reset PHY */ - printk_debug("Reseting PHY... "); + printk(BIOS_DEBUG, "Reseting PHY... "); if (conf->phy_lowreset) { write32((mmio + CMD3), VAL0 | PHY_RST_POL | RESET_PHY); } else { @@ -60,7 +60,7 @@ static void nic_init(struct device *dev) } mdelay(15); write32((mmio + CMD3), RESET_PHY); - printk_debug("Done\n"); + printk(BIOS_DEBUG, "Done\n"); } static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/amd/amd8111/amd8111_usb2.c b/src/southbridge/amd/amd8111/amd8111_usb2.c index 0156b6ac2f..3aa5211dd0 100644 --- a/src/southbridge/amd/amd8111/amd8111_usb2.c +++ b/src/southbridge/amd/amd8111/amd8111_usb2.c @@ -26,7 +26,7 @@ static void amd8111_usb2_enable(device_t dev) // Due to buggy USB2 we force it to disable. dev->enabled = 0; amd8111_enable(dev); - printk_debug("USB2 disabled.\n"); + printk(BIOS_DEBUG, "USB2 disabled.\n"); } static struct device_operations usb2_ops = { diff --git a/src/southbridge/amd/amd8131/amd8131_bridge.c b/src/southbridge/amd/amd8131/amd8131_bridge.c index 29713a37c8..04930517e6 100644 --- a/src/southbridge/amd/amd8131/amd8131_bridge.c +++ b/src/southbridge/amd/amd8131/amd8131_bridge.c @@ -83,7 +83,7 @@ static void amd8131_pcix_tune_dev(device_t dev, void *ptr) } - printk_debug("%s AMD8131 PCI-X tuning\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s AMD8131 PCI-X tuning\n", dev_path(dev)); status = pci_read_config32(dev, cap + PCI_X_STATUS); orig_cmd = cmd = pci_read_config16(dev,cap + PCI_X_CMD); @@ -170,7 +170,7 @@ static void amd8131_pcix_tune_dev(device_t dev, void *ptr) } } #if 0 - printk_debug("%s max_read: %d max_tran: %d sibs: %d sib_funcs: %d\n", + printk(BIOS_DEBUG, "%s max_read: %d max_tran: %d sibs: %d sib_funcs: %d\n", dev_path(dev), max_read, max_tran, sibs, sib_funcs, sib_funcs); #endif if (max_read != ((cmd & PCI_X_CMD_MAX_READ) >> 2)) { @@ -214,7 +214,7 @@ static unsigned int amd8131_scan_bus(struct bus *bus, info.sstatus = pci_read_config16(bus->dev, pos + PCI_X_SEC_STATUS); /* Print the PCI-X bus speed */ - printk_debug("PCI: %02x: %s\n", bus->secondary, pcix_speed(info.sstatus)); + printk(BIOS_DEBUG, "PCI: %02x: %s\n", bus->secondary, pcix_speed(info.sstatus)); /* Examine the bus and find out how loaded it is */ @@ -260,7 +260,7 @@ static unsigned int amd8131_scan_bus(struct bus *bus, * implement relaxed ordering. Errata #58 */ for(pbus = bus; !pbus->disable_relaxed_ordering; pbus = pbus->dev->bus) { - printk_spew("%s disabling relaxed ordering\n", + printk(BIOS_SPEW, "%s disabling relaxed ordering\n", bus_path(pbus)); pbus->disable_relaxed_ordering = 1; } diff --git a/src/southbridge/amd/amd8132/amd8132_bridge.c b/src/southbridge/amd/amd8132/amd8132_bridge.c index 8dc57d4510..2c18c5ebcb 100644 --- a/src/southbridge/amd/amd8132/amd8132_bridge.c +++ b/src/southbridge/amd/amd8132/amd8132_bridge.c @@ -107,7 +107,7 @@ static void amd8132_pcix_tune_dev(device_t dev, void *ptr) /* How many siblings does this device have? */ sibs = info->master_devices - 1; - printk_debug("%s AMD8132 PCI-X tuning\n", dev_path(dev)); + printk(BIOS_DEBUG, "%s AMD8132 PCI-X tuning\n", dev_path(dev)); status = pci_read_config32(dev, cap + PCI_X_STATUS); orig_cmd = cmd = pci_read_config16(dev,cap + PCI_X_CMD); @@ -177,7 +177,7 @@ static unsigned int amd8132_scan_bus(struct bus *bus, info.sstatus = pci_read_config16(bus->dev, pos + PCI_X_SEC_STATUS); /* Print the PCI-X bus speed */ - printk_debug("PCI: %02x: %s sstatus=%04x rev=%02x \n", bus->secondary, pcix_speed(info.sstatus), info.sstatus, info.rev); + printk(BIOS_DEBUG, "PCI: %02x: %s sstatus=%04x rev=%02x \n", bus->secondary, pcix_speed(info.sstatus), info.sstatus, info.rev); /* Examine the bus and find out how loaded it is */ diff --git a/src/southbridge/amd/cs5530/cs5530_ide.c b/src/southbridge/amd/cs5530/cs5530_ide.c index 09906b78bc..a1fa2dc2c3 100644 --- a/src/southbridge/amd/cs5530/cs5530_ide.c +++ b/src/southbridge/amd/cs5530/cs5530_ide.c @@ -55,9 +55,9 @@ static void ide_init(struct device *dev) pci_write_config8(dev, DECODE_CONTROL_REG2, reg8); - printk_info("%s IDE interface %s\n", "Primary", + printk(BIOS_INFO, "%s IDE interface %s\n", "Primary", conf->ide0_enable ? "enabled" : "disabled"); - printk_info("%s IDE interface %s\n", "Secondary", + printk(BIOS_INFO, "%s IDE interface %s\n", "Secondary", conf->ide1_enable ? "enabled" : "disabled"); } diff --git a/src/southbridge/amd/cs5530/cs5530_vga.c b/src/southbridge/amd/cs5530/cs5530_vga.c index 9347a081b8..2a2a8d8bdf 100644 --- a/src/southbridge/amd/cs5530/cs5530_vga.c +++ b/src/southbridge/amd/cs5530/cs5530_vga.c @@ -460,7 +460,7 @@ static void cs5530_vga_init(device_t dev) gx_base = GX_BASE; mode = modes[CONFIG_GX1_VIDEOMODE]; - printk_debug("Setting up video mode %dx%d with %d Hz clock\n", + printk(BIOS_DEBUG, "Setting up video mode %dx%d with %d Hz clock\n", mode->visible_pixel, mode->visible_lines, mode->pixel_clock); cs5530_set_clock_frequency(io_base, mode->pll_value); diff --git a/src/southbridge/amd/cs5535/cs5535.c b/src/southbridge/amd/cs5535/cs5535.c index 17bd902e0b..6f203558e3 100644 --- a/src/southbridge/amd/cs5535/cs5535.c +++ b/src/southbridge/amd/cs5535/cs5535.c @@ -39,14 +39,14 @@ static void nvram_on(struct device *dev) *flash = 0xf0; - printk_debug("Flash device: MFGID %02x, DEVID %02x\n", id1, id2); + printk(BIOS_DEBUG, "Flash device: MFGID %02x, DEVID %02x\n", id1, id2); #endif } static void southbridge_init(struct device *dev) { - printk_spew("cs5535: %s\n", __func__); + printk(BIOS_SPEW, "cs5535: %s\n", __func__); nvram_on(dev); } @@ -56,17 +56,17 @@ static void dump_south(struct device *dev) int i, j; for(i=0; i<256; i+=16) { - printk_debug("0x%02x: ", i); + printk(BIOS_DEBUG, "0x%02x: ", i); for(j=0; j<16; j++) - printk_debug("%02x ", pci_read_config8(dev, i+j)); - printk_debug("\n"); + printk(BIOS_DEBUG, "%02x ", pci_read_config8(dev, i+j)); + printk(BIOS_DEBUG, "\n"); } } */ static void southbridge_enable(struct device *dev) { - printk_spew("%s: dev is %p\n", __func__, dev); + printk(BIOS_SPEW, "%s: dev is %p\n", __func__, dev); } static void cs5535_read_resources(device_t dev) @@ -89,7 +89,7 @@ static void cs5535_read_resources(device_t dev) static void cs5535_pci_dev_enable_resources(device_t dev) { - printk_spew("cs5535.c: %s()\n", __func__); + printk(BIOS_SPEW, "cs5535.c: %s()\n", __func__); pci_dev_enable_resources(dev); enable_childrens_resources(dev); } diff --git a/src/southbridge/amd/cs5535/cs5535_ide.c b/src/southbridge/amd/cs5535/cs5535_ide.c index 30901672b7..b997ca2463 100644 --- a/src/southbridge/amd/cs5535/cs5535_ide.c +++ b/src/southbridge/amd/cs5535/cs5535_ide.c @@ -7,12 +7,12 @@ static void ide_init(struct device *dev) { - printk_spew("cs5535_ide: %s\n", __func__); + printk(BIOS_SPEW, "cs5535_ide: %s\n", __func__); } static void ide_enable(struct device *dev) { - printk_spew("cs5535_ide: %s\n", __func__); + printk(BIOS_SPEW, "cs5535_ide: %s\n", __func__); } static struct device_operations ide_ops = { diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c index e974d399d1..f068006f75 100644 --- a/src/southbridge/amd/cs5536/cs5536.c +++ b/src/southbridge/amd/cs5536/cs5536.c @@ -155,10 +155,10 @@ static void ChipsetFlashSetup(void) int i; int numEnabled = 0; - printk_debug("ChipsetFlashSetup: Start\n"); + printk(BIOS_DEBUG, "ChipsetFlashSetup: Start\n"); for (i = 0; i < FlashInitTableLen; i++) { if (FlashInitTable[i].fType != FLASH_TYPE_NONE) { - printk_debug("Enable CS%d\n", i); + printk(BIOS_DEBUG, "Enable CS%d\n", i); /* we need to configure the memory/IO mask */ msr = rdmsr(FlashPort[i]); msr.hi = 0; /* start with the "enabled" bit clear */ @@ -171,14 +171,14 @@ static void ChipsetFlashSetup(void) else msr.hi &= ~0x00000004; msr.hi |= FlashInitTable[i].fMask; - printk_debug("MSR(0x%08X, %08X_%08X)\n", FlashPort[i], + printk(BIOS_DEBUG, "MSR(0x%08X, %08X_%08X)\n", FlashPort[i], msr.hi, msr.lo); wrmsr(FlashPort[i], msr); /* now write-enable the device */ msr = rdmsr(MDD_NORF_CNTRL); msr.lo |= (1 << i); - printk_debug("MSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, + printk(BIOS_DEBUG, "MSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, msr.hi, msr.lo); wrmsr(MDD_NORF_CNTRL, msr); @@ -187,7 +187,7 @@ static void ChipsetFlashSetup(void) } } - printk_debug("ChipsetFlashSetup: Finish\n"); + printk(BIOS_DEBUG, "ChipsetFlashSetup: Finish\n"); } @@ -566,7 +566,7 @@ void chipsetinit(void) } /* Flash BAR size Setup */ - printk_err("%sDoing ChipsetFlashSetup()\n", + printk(BIOS_ERR, "%sDoing ChipsetFlashSetup()\n", sb->enable_ide_nand_flash == 1 ? "" : "Not "); if (sb->enable_ide_nand_flash == 1) ChipsetFlashSetup(); @@ -594,7 +594,7 @@ static void southbridge_init(struct device *dev) * unsigned short gpiobase = MDD_GPIO; */ - printk_err("cs5536: %s\n", __func__); + printk(BIOS_ERR, "cs5536: %s\n", __func__); setup_i8259(); lpc_init(sb); uarts_init(sb); @@ -606,7 +606,7 @@ static void southbridge_init(struct device *dev) (sb->enable_gpio_int_route >> 16)); } - printk_err("cs5536: %s: enable_ide_nand_flash is %d\n", __func__, + printk(BIOS_ERR, "cs5536: %s: enable_ide_nand_flash is %d\n", __func__, sb->enable_ide_nand_flash); if (sb->enable_ide_nand_flash == 1) { enable_ide_nand_flash_header(); @@ -616,7 +616,7 @@ static void southbridge_init(struct device *dev) /* disable unwanted virtual PCI devices */ for (i = 0; (i < MAX_UNWANTED_VPCI) && (0 != sb->unwanted_vpci[i]); i++) { - printk_debug("Disabling VPCI device: 0x%08X\n", + printk(BIOS_DEBUG, "Disabling VPCI device: 0x%08X\n", sb->unwanted_vpci[i]); outl(sb->unwanted_vpci[i] + 0x7C, 0xCF8); outl(0xDEADBEEF, 0xCFC); @@ -644,13 +644,13 @@ static void cs5536_read_resources(device_t dev) static void southbridge_enable(struct device *dev) { - printk_err("cs5536: %s: dev is %p\n", __func__, dev); + printk(BIOS_ERR, "cs5536: %s: dev is %p\n", __func__, dev); } static void cs5536_pci_dev_enable_resources(device_t dev) { - printk_err("cs5536: %s()\n", __func__); + printk(BIOS_ERR, "cs5536: %s()\n", __func__); pci_dev_enable_resources(dev); enable_childrens_resources(dev); } diff --git a/src/southbridge/amd/cs5536/cs5536_early_smbus.c b/src/southbridge/amd/cs5536/cs5536_early_smbus.c index e5a133e903..298feeed9b 100644 --- a/src/southbridge/amd/cs5536/cs5536_early_smbus.c +++ b/src/southbridge/amd/cs5536/cs5536_early_smbus.c @@ -53,7 +53,7 @@ static int smbus_wait(unsigned smbus_io_base) if ((val & SMB_STS_SDAST) != 0) break; if (val & (SMB_STS_BER | SMB_STS_NEGACK)) { - /*printk_debug("SMBUS WAIT ERROR %x\n", val); */ + /*printk(BIOS_DEBUG, "SMBUS WAIT ERROR %x\n", val); */ return SMBUS_ERROR; } } while (--loops); @@ -123,7 +123,7 @@ static int smbus_send_slave_address(unsigned smbus_io_base, /* check for bus conflict and NACK */ val = inb(smbus_io_base + SMB_STS); if (((val & SMB_STS_BER) != 0) || ((val & SMB_STS_NEGACK) != 0)) { - /* printk_debug("SEND SLAVE ERROR (%x)\n", val); */ + /* printk(BIOS_DEBUG, "SEND SLAVE ERROR (%x)\n", val); */ return SMBUS_ERROR; } return smbus_wait(smbus_io_base); diff --git a/src/southbridge/amd/cs5536/cs5536_ide.c b/src/southbridge/amd/cs5536/cs5536_ide.c index bbb6bb5bcd..4acf3ed61a 100644 --- a/src/southbridge/amd/cs5536/cs5536_ide.c +++ b/src/southbridge/amd/cs5536/cs5536_ide.c @@ -36,7 +36,7 @@ static void ide_init(struct device *dev) { uint32_t ide_cfg; - printk_spew("cs5536_ide: %s\n", __func__); + printk(BIOS_SPEW, "cs5536_ide: %s\n", __func__); /* GPIO and IRQ setup are handled in the main chipset code. */ // Enable the channel and Post Write Buffer @@ -49,7 +49,7 @@ static void ide_init(struct device *dev) static void ide_enable(struct device *dev) { - printk_spew("cs5536_ide: %s\n", __func__); + printk(BIOS_SPEW, "cs5536_ide: %s\n", __func__); } diff --git a/src/southbridge/amd/cs5536/cs5536_smbus2.h b/src/southbridge/amd/cs5536/cs5536_smbus2.h index 3b9e96c485..a470b3714c 100644 --- a/src/southbridge/amd/cs5536/cs5536_smbus2.h +++ b/src/southbridge/amd/cs5536/cs5536_smbus2.h @@ -78,7 +78,7 @@ static int smbus_wait(unsigned smbus_io_base) if ((val & SMB_STS_SDAST) != 0) break; if (val & (SMB_STS_BER | SMB_STS_NEGACK)) { - printk_debug("SMBUS WAIT ERROR %x\n", val); + printk(BIOS_DEBUG, "SMBUS WAIT ERROR %x\n", val); return SMBUS_ERROR; } } while (--loops); @@ -171,7 +171,7 @@ static int smbus_send_slave_address(unsigned smbus_io_base, /* check for bus conflict and NACK */ val = inb(smbus_io_base + SMB_STS); if (((val & SMB_STS_BER) != 0) || ((val & SMB_STS_NEGACK) != 0)) { - printk_debug("SEND SLAVE ERROR (%x)\n", val); + printk(BIOS_DEBUG, "SEND SLAVE ERROR (%x)\n", val); return SMBUS_ERROR; } return smbus_wait(smbus_io_base); @@ -250,7 +250,7 @@ static void _doread(unsigned smbus_io_base, unsigned char device, return; err: - printk_debug("SMBUS READ ERROR (%d): %d\n", index, ret); + printk(BIOS_DEBUG, "SMBUS READ ERROR (%d): %d\n", index, ret); } static unsigned char do_smbus_read_byte(unsigned smbus_io_base, @@ -300,7 +300,7 @@ static int _dowrite(unsigned smbus_io_base, unsigned char device, return 0; err: - printk_debug("SMBUS WRITE ERROR: %d\n", ret); + printk(BIOS_DEBUG, "SMBUS WRITE ERROR: %d\n", ret); return -1; } diff --git a/src/southbridge/amd/rs690/rs690.c b/src/southbridge/amd/rs690/rs690.c index 40913b3388..caf838aacf 100644 --- a/src/southbridge/amd/rs690/rs690.c +++ b/src/southbridge/amd/rs690/rs690.c @@ -129,7 +129,7 @@ void rs690_enable(device_t dev) device_t nb_dev = 0, sb_dev = 0; int dev_ind; - printk_info("rs690_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); + printk(BIOS_INFO, "rs690_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { @@ -147,7 +147,7 @@ void rs690_enable(device_t dev) dev_ind = dev->path.pci.devfn >> 3; switch (dev_ind) { case 0: /* bus0, dev0, fun0; */ - printk_info("Bus-0, Dev-0, Fun-0.\n"); + printk(BIOS_INFO, "Bus-0, Dev-0, Fun-0.\n"); enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ config_gpp_core(nb_dev, sb_dev); rs690_gpp_sb_init(nb_dev, sb_dev, 8); @@ -159,11 +159,11 @@ void rs690_enable(device_t dev) break; case 1: /* bus0, dev1 */ - printk_info("Bus-0, Dev-1, Fun-0.\n"); + printk(BIOS_INFO, "Bus-0, Dev-1, Fun-0.\n"); break; case 2: /* bus0, dev2,3, two GFX */ case 3: - printk_info("Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); + printk(BIOS_INFO, "Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, (dev->enabled ? 0 : 1) << dev_ind); if (dev->enabled) @@ -173,7 +173,7 @@ void rs690_enable(device_t dev) case 5: case 6: case 7: - printk_info("Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", + printk(BIOS_INFO, "Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, (dev->enabled ? 0 : 1) << dev_ind); @@ -181,7 +181,7 @@ void rs690_enable(device_t dev) rs690_gpp_sb_init(nb_dev, dev, dev_ind); break; case 8: /* bus0, dev8, SB */ - printk_info("Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); + printk(BIOS_INFO, "Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, (dev->enabled ? 1 : 0) << 6); if (dev->enabled) @@ -189,7 +189,7 @@ void rs690_enable(device_t dev) disable_pcie_bar3(nb_dev); break; default: - printk_debug("unknown dev: %s\n", dev_path(dev)); + printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev)); } } diff --git a/src/southbridge/amd/rs690/rs690_cmn.c b/src/southbridge/amd/rs690/rs690_cmn.c index aa75a64f4f..026341394a 100644 --- a/src/southbridge/amd/rs690/rs690_cmn.c +++ b/src/southbridge/amd/rs690/rs690_cmn.c @@ -50,7 +50,7 @@ u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg) { /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; - printk_debug("addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + printk(BIOS_DEBUG, "addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, dev->path.pci.devfn); addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.pci.devfn << 12 | reg; @@ -63,7 +63,7 @@ void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; - /*printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + /*printk(BIOS_DEBUG, "write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, dev->path.pci.devfn);*/ addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.pci.devfn << 12 | reg_pos; @@ -253,7 +253,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) mdelay(40); udelay(200); lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */ - printk_debug("PcieLinkTraining port=%x:lc current state=%x\n", + printk(BIOS_DEBUG, "PcieLinkTraining port=%x:lc current state=%x\n", port, lc_state); current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */ @@ -274,7 +274,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) reg = pci_ext_read_config32(nb_dev, dev, PCIE_VC0_RESOURCE_STATUS); - printk_debug("PcieTrainPort reg=0x%x\n", reg); + printk(BIOS_DEBUG, "PcieTrainPort reg=0x%x\n", reg); /* check bit1 */ if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */ /* set bit8=1, bit0-2=bit4-6 */ diff --git a/src/southbridge/amd/rs690/rs690_early_setup.c b/src/southbridge/amd/rs690/rs690_early_setup.c index d253f0d868..5afb7b57a3 100644 --- a/src/southbridge/amd/rs690/rs690_early_setup.c +++ b/src/southbridge/amd/rs690/rs690_early_setup.c @@ -133,23 +133,23 @@ static void get_cpu_rev() u32 eax, ebx, ecx, edx; __asm__ volatile ("cpuid":"=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) :"0"(1)); - printk_info("get_cpu_rev EAX=0x%x.\n", eax); + printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax); if (eax <= 0xfff) - printk_info("CPU Rev is K8_Cx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Cx.\n"); else if (eax <= 0x10fff) - printk_info("CPU Rev is K8_Dx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Dx.\n"); else if (eax <= 0x20fff) - printk_info("CPU Rev is K8_Ex.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Ex.\n"); else if (eax <= 0x40fff) - printk_info("CPU Rev is K8_Fx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Fx.\n"); else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */ - printk_info("CPU Rev is K8_G1.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); else if (eax <= 0X60FF0) - printk_info("CPU Rev is K8_G0.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G0.\n"); else if (eax <= 0x100000) - printk_info("CPU Rev is K8_G1.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); else - printk_info("CPU Rev is K8_10.\n"); + printk(BIOS_INFO, "CPU Rev is K8_10.\n"); } static u8 get_nb_rev(device_t nb_dev) @@ -197,19 +197,19 @@ static void rs690_htinit() ************************/ reg = pci_read_config32(k8_f0, 0x88); k8_ht_freq = (reg & 0xf00) >> 8; - printk_spew("rs690_htinit k8_ht_freq=%x.\n", k8_ht_freq); + printk(BIOS_SPEW, "rs690_htinit k8_ht_freq=%x.\n", k8_ht_freq); rs690_f0 = PCI_DEV(0, 0, 0); reg8 = pci_read_config8(rs690_f0, 0x9c); - printk_spew("rs690_htinit NB_CFG_Q_F1000_800=%x\n", reg8); + printk(BIOS_SPEW, "rs690_htinit NB_CFG_Q_F1000_800=%x\n", reg8); /* For 1000 MHz HT, NB_CFG_Q_F1000_800 bit 0 MUST be set. * For any other HT frequency, NB_CFG_Q_F1000_800 bit 0 MUST NOT be set. */ if (((k8_ht_freq == 0x6) || (k8_ht_freq == 0xf)) && (!(reg8 & 0x1))) { - printk_info("rs690_htinit setting bit 0 in NB_CFG_Q_F1000_800 to use 1 GHz HT\n"); + printk(BIOS_INFO, "rs690_htinit setting bit 0 in NB_CFG_Q_F1000_800 to use 1 GHz HT\n"); reg8 |= 0x1; pci_write_config8(rs690_f0, 0x9c, reg8); } else if ((k8_ht_freq != 0x6) && (k8_ht_freq != 0xf) && (reg8 & 0x1)) { - printk_info("rs690_htinit clearing bit 0 in NB_CFG_Q_F1000_800 to not use 1 GHz HT\n"); + printk(BIOS_INFO, "rs690_htinit clearing bit 0 in NB_CFG_Q_F1000_800 to not use 1 GHz HT\n"); reg8 &= ~0x1; pci_write_config8(rs690_f0, 0x9c, reg8); } @@ -234,7 +234,7 @@ static void k8_optimization() device_t k8_f0, k8_f2, k8_f3; msr_t msr; - printk_info("k8_optimization()\n"); + printk(BIOS_INFO, "k8_optimization()\n"); k8_f0 = PCI_DEV(0, 0x18, 0); k8_f2 = PCI_DEV(0, 0x18, 2); k8_f3 = PCI_DEV(0, 0x18, 3); @@ -425,7 +425,7 @@ static void rs690_por_htiu_index_init(device_t nb_dev) *****************************************/ static void rs690_por_init(device_t nb_dev) { - printk_info("rs690_por_init\n"); + printk(BIOS_INFO, "rs690_por_init\n"); /* ATINB_PCICFG_POR_TABLE, initialize the values for rs690 PCI Config registers */ rs690_por_pcicfg_init(nb_dev); @@ -463,19 +463,19 @@ static void rs690_before_pci_init() static void rs690_early_setup() { device_t nb_dev = PCI_DEV(0, 0, 0); - printk_info("rs690_early_setup()\n"); + printk(BIOS_INFO, "rs690_early_setup()\n"); /*ATINB_PrepareInit */ get_cpu_rev(); switch (get_nb_rev(nb_dev)) { /* PCIEMiscInit */ case 5: - printk_info("NB Revision is A11.\n"); + printk(BIOS_INFO, "NB Revision is A11.\n"); break; case 6: - printk_info("NB Revision is A12.\n"); + printk(BIOS_INFO, "NB Revision is A12.\n"); break; case 7: - printk_info("NB Revision is A21.\n"); + printk(BIOS_INFO, "NB Revision is A21.\n"); break; } diff --git a/src/southbridge/amd/rs690/rs690_gfx.c b/src/southbridge/amd/rs690/rs690_gfx.c index 3c87fa0447..7f76a057ac 100644 --- a/src/southbridge/amd/rs690/rs690_gfx.c +++ b/src/southbridge/amd/rs690/rs690_gfx.c @@ -45,7 +45,7 @@ static u32 clkind_read(device_t dev, u32 index) static void clkind_write(device_t dev, u32 index, u32 data) { u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF; - /* printk_info("gfx bar 2 %02x\n", gfx_bar2); */ + /* printk(BIOS_INFO, "gfx bar 2 %02x\n", gfx_bar2); */ *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index | 1<<7; *(u32*)(gfx_bar2+CLK_CNTL_DATA) = data; @@ -57,7 +57,7 @@ static void clkind_write(device_t dev, u32 index, u32 data) */ static void rs690_gfx_read_resources(device_t dev) { - printk_info("rs690_gfx_read_resources.\n"); + printk(BIOS_INFO, "rs690_gfx_read_resources.\n"); /* The initial value of 0x24 is 0xFFFFFFFF, which is confusing. Even if we write 0xFFFFFFFF into it, it will be 0xFFF00000, @@ -77,7 +77,7 @@ static void internal_gfx_pci_dev_init(struct device *dev) (struct southbridge_amd_rs690_config *)dev->chip_info; deviceid = pci_read_config16(dev, PCI_DEVICE_ID); vendorid = pci_read_config16(dev, PCI_VENDOR_ID); - printk_info("internal_gfx_pci_dev_init device=%x, vendor=%x.\n", + printk(BIOS_INFO, "internal_gfx_pci_dev_init device=%x, vendor=%x.\n", deviceid, vendorid); pci_dev_init(dev); @@ -117,12 +117,12 @@ static void rs690_internal_gfx_enable(device_t dev) device_t k8_f0 = 0, k8_f2 = 0; device_t nb_dev = dev_find_slot(0, 0); - printk_info("rs690_internal_gfx_enable dev=0x%p, nb_dev=0x%p.\n", dev, + printk(BIOS_INFO, "rs690_internal_gfx_enable dev=0x%p, nb_dev=0x%p.\n", dev, nb_dev); /* set APERTURE_SIZE, 128M. */ l_dword = pci_read_config32(nb_dev, 0x8c); - printk_info("nb_dev, 0x8c=0x%x\n", l_dword); + printk(BIOS_INFO, "nb_dev, 0x8c=0x%x\n", l_dword); l_dword &= 0xffffff8f; pci_write_config32(nb_dev, 0x8c, l_dword); @@ -231,13 +231,13 @@ static void single_port_configuration(device_t nb_dev, device_t dev) struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info; - printk_info("rs690_gfx_init single_port_configuration.\n"); + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration.\n"); /* step 12 training, releases hold training for GFX port 0 (device 2) */ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0<<4); PcieReleasePortTraining(nb_dev, dev, 2); result = PcieTrainPort(nb_dev, dev, 2); - printk_info("rs690_gfx_init single_port_configuration step12.\n"); + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration step12.\n"); /* step 13 Power Down Control */ /* step 13.1 Enables powering down transmitter and receiver pads along with PLL macros. */ @@ -257,7 +257,7 @@ static void single_port_configuration(device_t nb_dev, device_t dev) reg32 = nbpcie_p_read_index(dev, 0xa2); width = (reg32 >> 4) & 0x7; - printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width); + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); switch (width) { case 1: case 2: @@ -274,11 +274,11 @@ static void single_port_configuration(device_t nb_dev, device_t dev) break; } } - printk_info("rs690_gfx_init single_port_configuration step13.\n"); + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration step13.\n"); /* step 14 Reset Enumeration Timer, disables the shortening of the enumeration timer */ set_pcie_enable_bits(dev, 0x70, 1 << 19, 0 << 19); - printk_info("rs690_gfx_init single_port_configuration step14.\n"); + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration step14.\n"); } /* step 15 ~ step 18 from rpr */ @@ -305,7 +305,7 @@ static void dual_port_configuration(device_t nb_dev, device_t dev) reg32 = nbpcie_p_read_index(dev, 0xa2); width = (reg32 >> 4) & 0x7; - printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width); + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); switch (width) { case 1: case 2: @@ -335,7 +335,7 @@ static void dual_port_configuration(device_t nb_dev, device_t dev) reg32 = nbpcie_p_read_index(dev, 0xa2); width = (reg32 >> 4) & 0x7; - printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width); + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); switch (width) { case 1: case 2: @@ -413,13 +413,13 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info; - printk_info("rs690_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", + printk(BIOS_INFO, "rs690_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", nb_dev, dev, port); /* step 0, REFCLK_SEL, skip A11 revision */ set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 9, cfg->gfx_dev2_dev3 ? 1 << 9 : 0 << 9); - printk_info("rs690_gfx_init step0.\n"); + printk(BIOS_INFO, "rs690_gfx_init step0.\n"); /* step 1, lane reversal (only need if CMOS option is enabled) */ if (cfg->gfx_lane_reversal) { @@ -427,13 +427,13 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) if (cfg->gfx_dual_slot) set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3); } - printk_info("rs690_gfx_init step1.\n"); + printk(BIOS_INFO, "rs690_gfx_init step1.\n"); /* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */ /* AMD calls the configuration CrossFire */ if (cfg->gfx_dual_slot) set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8); - printk_info("rs690_gfx_init step2.\n"); + printk(BIOS_INFO, "rs690_gfx_init step2.\n"); /* step 2, TMDS, (only need if CMOS option is enabled) */ if (cfg->gfx_tmds) { @@ -461,7 +461,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) /* step 4.6 bring external GFX device out of reset, wait for 1ms */ mdelay(1); - printk_info("rs690_gfx_init step4.\n"); + printk(BIOS_INFO, "rs690_gfx_init step4.\n"); /* step 5 program PCIE memory mapped configuration space */ /* done by enable_pci_bar3() before */ @@ -508,7 +508,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) set_nbmisc_enable_bits(nb_dev, 0x35, 0x3 << 2, 0x3 << 2); } - printk_info("rs690_gfx_init step6.\n"); + printk(BIOS_INFO, "rs690_gfx_init step6.\n"); /* step 7 compliance state, (only need if CMOS option is enabled) */ /* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */ @@ -518,64 +518,64 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) /* release hold training for device 2. GFX initialization is done. */ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4); dynamic_link_width_control(nb_dev, dev, cfg->gfx_link_width); - printk_info("rs690_gfx_init step7.\n"); + printk(BIOS_INFO, "rs690_gfx_init step7.\n"); return; } /* step 8 common initialization */ /* step 8.1 sets RCB timeout to be 25ms */ set_pcie_enable_bits(dev, 0x70, 7 << 16, 3 << 16); - printk_info("rs690_gfx_init step8.1.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.1.\n"); /* step 8.2 disables slave ordering logic */ set_pcie_enable_bits(nb_dev, 0x20, 1 << 8, 1 << 8); - printk_info("rs690_gfx_init step8.2.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.2.\n"); /* step 8.3 sets DMA payload size to 64 bytes */ set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10); - printk_info("rs690_gfx_init step8.3.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.3.\n"); /* step 8.4 if the LTSSM could not see all 8 TS1 during Polling Active, it can still * time out and go back to Detect Idle.*/ set_pcie_enable_bits(dev, 0x02, 1 << 14, 1 << 14); - printk_info("rs690_gfx_init step8.4.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.4.\n"); /* step 8.5 shortens the enumeration timer */ set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19); - printk_info("rs690_gfx_init step8.5.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.5.\n"); /* step 8.6 blocks DMA traffic during C3 state */ set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0); - printk_info("rs690_gfx_init step8.6.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.6.\n"); /* step 8.7 Do not gate the electrical idle form the PHY * step 8.8 Enables the escape from L1L23 */ set_pcie_enable_bits(dev, 0xa0, 3 << 30, 3 << 30); - printk_info("rs690_gfx_init step8.8.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.8.\n"); /* step 8.9 Setting this register to 0x1 will workaround a PCI Compliance failure reported by Vista DTM. * SLOT_IMPLEMENTED@PCIE_CAP */ reg16 = pci_read_config16(dev, 0x5a); reg16 |= 0x100; pci_write_config16(dev, 0x5a, reg16); - printk_info("rs690_gfx_init step8.9.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.9.\n"); /* step 8.10 Setting this register to 0x1 will hide the Advanced Error Rporting Capabilities in the PCIE Brider. * This will workaround several failures reported by the PCI Compliance test under Vista DTM. */ set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 31, 0 << 31); - printk_info("rs690_gfx_init step8.10.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.10.\n"); /* step 8.11 Sets REGS_DLP_IGNORE_IN_L1_EN to ignore DLLPs during L1 so that txclk can be turned off. */ set_pcie_enable_bits(nb_dev, 0x02, 1 << 0, 1 << 0); - printk_info("rs690_gfx_init step8.11.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.11.\n"); /* step 8.12 Sets REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent lc to go to from L0 to Rcv_L0s if L1 is armed. */ set_pcie_enable_bits(nb_dev, 0x02, 1 << 6, 1 << 6); - printk_info("rs690_gfx_init step8.12.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.12.\n"); /* step 8.13 Sets CMGOOD_OVERRIDE. */ set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 17, 1 << 17); - printk_info("rs690_gfx_init step8.13.\n"); + printk(BIOS_INFO, "rs690_gfx_init step8.13.\n"); /* step 9 Enable TLP Flushing, for non-AMD GFX devices and Hot-Plug devices only. */ /* skip */ @@ -619,7 +619,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) dual_port_configuration(nb_dev, dev); break; default: - printk_info("Incorrect configuration of external gfx slot.\n"); + printk(BIOS_INFO, "Incorrect configuration of external gfx slot.\n"); break; } } diff --git a/src/southbridge/amd/rs690/rs690_ht.c b/src/southbridge/amd/rs690/rs690_ht.c index ef4b34296e..26824b5322 100644 --- a/src/southbridge/amd/rs690/rs690_ht.c +++ b/src/southbridge/amd/rs690/rs690_ht.c @@ -53,7 +53,7 @@ static void pcie_init(struct device *dev) /* Enable pci error detecting */ u32 dword; - printk_info("pcie_init in rs690_ht.c\n"); + printk(BIOS_INFO, "pcie_init in rs690_ht.c\n"); /* System error enable */ dword = pci_read_config32(dev, 0x04); diff --git a/src/southbridge/amd/rs690/rs690_pcie.c b/src/southbridge/amd/rs690/rs690_pcie.c index 91e6bb1066..ad2e871db4 100644 --- a/src/southbridge/amd/rs690/rs690_pcie.c +++ b/src/southbridge/amd/rs690/rs690_pcie.c @@ -110,7 +110,7 @@ static void pcie_init(struct device *dev) /* Enable pci error detecting */ u32 dword; - printk_debug("pcie_init in rs690_pcie.c\n"); + printk(BIOS_DEBUG, "pcie_init in rs690_pcie.c\n"); /* System error enable */ dword = pci_read_config32(dev, 0x04); @@ -168,7 +168,7 @@ static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev) *****************************************************************/ void enable_pcie_bar3(device_t nb_dev) { - printk_debug("enable_pcie_bar3()\n"); + printk(BIOS_DEBUG, "enable_pcie_bar3()\n"); set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */ set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16); @@ -184,7 +184,7 @@ void enable_pcie_bar3(device_t nb_dev) *****************************************************************/ void disable_pcie_bar3(device_t nb_dev) { - printk_debug("disable_pcie_bar3()\n"); + printk(BIOS_DEBUG, "disable_pcie_bar3()\n"); set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */ pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */ ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS); @@ -206,7 +206,7 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port) device_t sb_dev; struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info; - printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port); + printk(BIOS_DEBUG, "gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port); /* init GPP core */ set_pcie_enable_bits(nb_dev, 0x20 | PCIE_CORE_INDEX_GPPSB, 1 << 8, @@ -262,7 +262,7 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port) PcieReleasePortTraining(nb_dev, dev, port); if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) { u8 res = PcieTrainPort(nb_dev, dev, port); - printk_debug("PcieTrainPort port=0x%x result=%d\n", port, res); + printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res); if (res) { AtiPcieCfg.PortDetect |= 1 << port; } diff --git a/src/southbridge/amd/rs780/rs780.c b/src/southbridge/amd/rs780/rs780.c index b7ec1154ce..471603f865 100644 --- a/src/southbridge/amd/rs780/rs780.c +++ b/src/southbridge/amd/rs780/rs780.c @@ -120,9 +120,9 @@ void rs780_nb_pci_table(device_t nb_dev) /* Program NB PCI table. */ temp16 = pci_read_config16(nb_dev, 0x04); - printk_debug("NB_PCI_REG04 = %x.\n", temp16); + printk(BIOS_DEBUG, "NB_PCI_REG04 = %x.\n", temp16); temp32 = pci_read_config32(nb_dev, 0x84); - printk_debug("NB_PCI_REG84 = %x.\n", temp32); + printk(BIOS_DEBUG, "NB_PCI_REG84 = %x.\n", temp32); pci_write_config8(nb_dev, 0x4c, 0x42); @@ -131,7 +131,7 @@ void rs780_nb_pci_table(device_t nb_dev) pci_write_config8(nb_dev, 0x4e, temp8); temp32 = pci_read_config32(nb_dev, 0x4c); - printk_debug("NB_PCI_REG4C = %x.\n", temp32); + printk(BIOS_DEBUG, "NB_PCI_REG4C = %x.\n", temp32); /* disable GFX debug. */ temp8 = pci_read_config8(nb_dev, 0x8d); @@ -250,7 +250,7 @@ void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) /* Enable PCIe configuration space. */ set_htiu_enable_bits(nb_dev, 0x32, 0, 1<<28); - printk_info("GC is accessible from now on.\n"); + printk(BIOS_INFO, "GC is accessible from now on.\n"); } /*********************************************** @@ -272,7 +272,7 @@ void rs780_enable(device_t dev) device_t nb_dev = 0, sb_dev = 0; int dev_ind; - printk_info("rs780_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); + printk(BIOS_INFO, "rs780_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { @@ -290,7 +290,7 @@ void rs780_enable(device_t dev) dev_ind = dev->path.pci.devfn >> 3; switch (dev_ind) { case 0: /* bus0, dev0, fun0; */ - printk_info("Bus-0, Dev-0, Fun-0.\n"); + printk(BIOS_INFO, "Bus-0, Dev-0, Fun-0.\n"); enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ config_gpp_core(nb_dev, sb_dev); rs780_gpp_sb_init(nb_dev, sb_dev, 8); @@ -304,12 +304,12 @@ void rs780_enable(device_t dev) break; case 1: /* bus0, dev1, APC. */ - printk_info("Bus-0, Dev-1, Fun-0.\n"); + printk(BIOS_INFO, "Bus-0, Dev-1, Fun-0.\n"); rs780_nb_gfx_dev_table(nb_dev, dev); break; case 2: /* bus0, dev2,3, two GFX */ case 3: - printk_info("Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); + printk(BIOS_INFO, "Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, (dev->enabled ? 0 : 1) << dev_ind); if (dev->enabled) @@ -319,7 +319,7 @@ void rs780_enable(device_t dev) case 5: case 6: case 7: - printk_info("Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", + printk(BIOS_INFO, "Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, (dev->enabled ? 0 : 1) << dev_ind); @@ -327,7 +327,7 @@ void rs780_enable(device_t dev) rs780_gpp_sb_init(nb_dev, dev, dev_ind); break; case 8: /* bus0, dev8, SB */ - printk_info("Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); + printk(BIOS_INFO, "Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, (dev->enabled ? 1 : 0) << 6); if (dev->enabled) @@ -336,7 +336,7 @@ void rs780_enable(device_t dev) break; case 9: /* bus 0, dev 9,10, GPP */ case 10: - printk_info("Bus-0, Dev-9, 10, Fun-0. enable=%d\n", + printk(BIOS_INFO, "Bus-0, Dev-9, 10, Fun-0. enable=%d\n", dev->enabled); enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), @@ -346,7 +346,7 @@ void rs780_enable(device_t dev) /* Dont call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */ break; default: - printk_debug("unknown dev: %s\n", dev_path(dev)); + printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev)); } } diff --git a/src/southbridge/amd/rs780/rs780_cmn.c b/src/southbridge/amd/rs780/rs780_cmn.c index bf27794fc7..ab91074ad2 100644 --- a/src/southbridge/amd/rs780/rs780_cmn.c +++ b/src/southbridge/amd/rs780/rs780_cmn.c @@ -48,7 +48,7 @@ u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg) { /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; - printk_debug("addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + printk(BIOS_DEBUG, "addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, dev->path.pci.devfn); addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.pci.devfn << 12 | reg; @@ -61,7 +61,7 @@ void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; - /*printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + /*printk(BIOS_DEBUG, "write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, dev->path.pci.devfn);*/ addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.pci.devfn << 12 | reg_pos; @@ -271,7 +271,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) mdelay(40); udelay(200); lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */ - printk_debug("PcieLinkTraining port=%x:lc current state=%x\n", + printk(BIOS_DEBUG, "PcieLinkTraining port=%x:lc current state=%x\n", port, lc_state); current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */ @@ -297,7 +297,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) reg |= lane_mask << 8 | lane_mask; reg = 0xE0E0; /* TODO: See the comments in rs780_pcie.c, at about line 145. */ nbpcie_ind_write_index(nb_dev, 0x65 | gfx_gpp_sb_sel, reg); - printk_debug("link_width=%x, lane_mask=%x", + printk(BIOS_DEBUG, "link_width=%x, lane_mask=%x", current_link_width, lane_mask); set_pcie_reset(); mdelay(1); @@ -311,7 +311,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) reg = pci_ext_read_config32(nb_dev, dev, PCIE_VC0_RESOURCE_STATUS); - printk_debug("PcieTrainPort reg=0x%x\n", reg); + printk(BIOS_DEBUG, "PcieTrainPort reg=0x%x\n", reg); /* check bit1 */ if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */ /* set bit8=1, bit0-2=bit4-6 */ diff --git a/src/southbridge/amd/rs780/rs780_early_setup.c b/src/southbridge/amd/rs780/rs780_early_setup.c index 5b9616f3ca..159d51f52e 100644 --- a/src/southbridge/amd/rs780/rs780_early_setup.c +++ b/src/southbridge/amd/rs780/rs780_early_setup.c @@ -147,25 +147,25 @@ static void get_cpu_rev() u32 eax; eax = cpuid_eax(1); - printk_info("get_cpu_rev EAX=0x%x.\n", eax); + printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax); if (eax <= 0xfff) - printk_info("CPU Rev is K8_Cx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Cx.\n"); else if (eax <= 0x10fff) - printk_info("CPU Rev is K8_Dx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Dx.\n"); else if (eax <= 0x20fff) - printk_info("CPU Rev is K8_Ex.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Ex.\n"); else if (eax <= 0x40fff) - printk_info("CPU Rev is K8_Fx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Fx.\n"); else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */ - printk_info("CPU Rev is K8_G1.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); else if (eax <= 0X60FF0) - printk_info("CPU Rev is K8_G0.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G0.\n"); else if (eax <= 0x100000) - printk_info("CPU Rev is K8_G1.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); else if (eax <= 0x100f00) - printk_info("CPU Rev is Fam 10.\n"); + printk(BIOS_INFO, "CPU Rev is Fam 10.\n"); else - printk_info("CPU Rev is K8_10.\n"); + printk(BIOS_INFO, "CPU Rev is K8_10.\n"); } static u8 is_famly10() @@ -246,7 +246,7 @@ static void rs780_htinit() ************************/ reg = pci_read_config32(cpu_f0, 0x88); cpu_ht_freq = (reg & 0xf00) >> 8; - printk_info("rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq); + printk(BIOS_INFO, "rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq); rs780_f0 = PCI_DEV(0, 0, 0); //set_nbcfg_enable_bits(rs780_f0, 0xC8, 0x7<<24 | 0x7<<28, 1<<24 | 1<<28); @@ -260,7 +260,7 @@ static void rs780_htinit() * So we check 6 only, it would be faster. */ if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) || (cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) { - printk_info("rs780_htinit: HT1 mode\n"); + printk(BIOS_INFO, "rs780_htinit: HT1 mode\n"); /* HT1 mode, RPR 8.4.2 */ /* set IBIAS code */ @@ -268,7 +268,7 @@ static void rs780_htinit() /* Optimizes chipset HT transmitter drive strength */ set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1); } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) { - printk_info("rs780_htinit: HT3 mode\n"); + printk(BIOS_INFO, "rs780_htinit: HT3 mode\n"); #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */ /* HT3 mode, RPR 8.4.3 */ @@ -330,7 +330,7 @@ static void k8_optimization() device_t k8_f0, k8_f2, k8_f3; msr_t msr; - printk_info("k8_optimization()\n"); + printk(BIOS_INFO, "k8_optimization()\n"); k8_f0 = PCI_DEV(0, 0x18, 0); k8_f2 = PCI_DEV(0, 0x18, 2); k8_f3 = PCI_DEV(0, 0x18, 3); @@ -373,7 +373,7 @@ void fam10_optimization() msr_t msr; u32 val; - printk_info("fam10_optimization()\n"); + printk(BIOS_INFO, "fam10_optimization()\n"); cpu_f0 = PCI_DEV(0, 0x18, 0); cpu_f2 = PCI_DEV(0, 0x18, 2); @@ -612,7 +612,7 @@ static void rs780_por_htiu_index_init(device_t nb_dev) *****************************************/ static void rs780_por_init(device_t nb_dev) { - printk_info("rs780_por_init\n"); + printk(BIOS_INFO, "rs780_por_init\n"); /* ATINB_PCICFG_POR_TABLE, initialize the values for rs780 PCI Config registers */ rs780_por_pcicfg_init(nb_dev); @@ -642,20 +642,20 @@ static void rs780_before_pci_init() static void rs780_early_setup() { device_t nb_dev = PCI_DEV(0, 0, 0); - printk_info("rs780_early_setup()\n"); + printk(BIOS_INFO, "rs780_early_setup()\n"); get_cpu_rev(); - /* The printk_info(s) below cause the system unstable. */ + /* The printk(BIOS_INFO, s) below cause the system unstable. */ switch (get_nb_rev(nb_dev)) { case REV_RS780_A11: - /* printk_info("NB Revision is A11.\n"); */ + /* printk(BIOS_INFO, "NB Revision is A11.\n"); */ break; case REV_RS780_A12: - /* printk_info("NB Revision is A12.\n"); */ + /* printk(BIOS_INFO, "NB Revision is A12.\n"); */ break; case REV_RS780_A13: - /* printk_info("NB Revision is A13.\n"); */ + /* printk(BIOS_INFO, "NB Revision is A13.\n"); */ break; } diff --git a/src/southbridge/amd/rs780/rs780_gfx.c b/src/southbridge/amd/rs780/rs780_gfx.c index aa46451410..808bcb175f 100644 --- a/src/southbridge/amd/rs780/rs780_gfx.c +++ b/src/southbridge/amd/rs780/rs780_gfx.c @@ -55,7 +55,7 @@ static u32 clkind_read(device_t dev, u32 index) static void clkind_write(device_t dev, u32 index, u32 data) { u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF; - /* printk_info("gfx bar 2 %02x\n", gfx_bar2); */ + /* printk(BIOS_INFO, "gfx bar 2 %02x\n", gfx_bar2); */ *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index | 1<<7; *(u32*)(gfx_bar2+CLK_CNTL_DATA) = data; @@ -67,7 +67,7 @@ static void clkind_write(device_t dev, u32 index, u32 data) */ static void rs780_gfx_read_resources(device_t dev) { - printk_info("rs780_gfx_read_resources.\n"); + printk(BIOS_INFO, "rs780_gfx_read_resources.\n"); /* The initial value of 0x24 is 0xFFFFFFFF, which is confusing. Even if we write 0xFFFFFFFF into it, it will be 0xFFF00000, @@ -189,7 +189,7 @@ CIM_STATUS GetCreativeMMIO(MMIORANGE *pMMIO) { tempdev = dev_find_slot(Bus, Dev << 3); Value = pci_read_config32(tempdev, 0); - printk_debug("Dev ID %x \n", Value); + printk(BIOS_DEBUG, "Dev ID %x \n", Value); if((Value & 0xffff) == 0x1102) {//Creative //Found Creative SB @@ -220,7 +220,7 @@ CIM_STATUS GetCreativeMMIO(MMIORANGE *pMMIO) } } } - printk_debug(" MMIOStart %x MMIOLimit %x \n", MMIOStart, MMIOLimit); + printk(BIOS_DEBUG, " MMIOStart %x MMIOLimit %x \n", MMIOStart, MMIOLimit); if (MMIOStart < MMIOLimit) { Status = SetMMIO(MMIOStart>>8, MMIOLimit>>8, 0x80, pMMIO); @@ -310,7 +310,7 @@ static void internal_gfx_pci_dev_init(struct device *dev) deviceid = pci_read_config16(dev, PCI_DEVICE_ID); vendorid = pci_read_config16(dev, PCI_VENDOR_ID); - printk_info("internal_gfx_pci_dev_init device=%x, vendor=%x.\n", + printk(BIOS_INFO, "internal_gfx_pci_dev_init device=%x, vendor=%x.\n", deviceid, vendorid); command = pci_read_config16(dev, 0x04); @@ -420,7 +420,7 @@ static void internal_gfx_pci_dev_init(struct device *dev) vgainfo.ulBootUpEngineClock = 500 * 100; /* set boot up GFX engine clock. */ vgainfo.ulReserved1[0] = 0; vgainfo.ulReserved1[1] = 0; value = pci_read_config32(k8_f2, 0x94); - printk_debug("MEMCLK = %x\n", value&0x7); + printk(BIOS_DEBUG, "MEMCLK = %x\n", value&0x7); vgainfo.ulBootUpUMAClock = 333 * 100; /* set boot up UMA memory clock. */ vgainfo.ulBootUpSidePortClock = 0; /* disable SP. */ vgainfo.ulMinSidePortClock = 0; /* disable SP. */ @@ -447,14 +447,14 @@ static void internal_gfx_pci_dev_init(struct device *dev) vgainfo.usBootUpNBVoltage = 0x1a; value = pci_read_config32(nb_dev, 0xd0); - printk_debug("NB HT speed = %x.\n", value); + printk(BIOS_DEBUG, "NB HT speed = %x.\n", value); value = pci_read_config32(k8_f0, 0x88); - printk_debug("CPU HT speed = %x.\n", value); + printk(BIOS_DEBUG, "CPU HT speed = %x.\n", value); vgainfo.ulHTLinkFreq = 100 * 100; /* set HT speed. */ /* HT width. */ value = pci_read_config32(nb_dev, 0xc8); - printk_debug("HT width = %x.\n", value); + printk(BIOS_DEBUG, "HT width = %x.\n", value); vgainfo.usMinHTLinkWidth = 16; vgainfo.usMaxHTLinkWidth = 16; vgainfo.usUMASyncStartDelay = 322; @@ -585,10 +585,10 @@ static void rs780_internal_gfx_enable(device_t dev) u32 FB_Start, FB_End; #endif - printk_info("rs780_internal_gfx_enable dev = 0x%p, nb_dev = 0x%p.\n", dev, nb_dev); + printk(BIOS_INFO, "rs780_internal_gfx_enable dev = 0x%p, nb_dev = 0x%p.\n", dev, nb_dev); sysmem = rdmsr(0xc001001a); - printk_info("sysmem = %x_%x\n", sysmem.hi, sysmem.lo); + printk(BIOS_INFO, "sysmem = %x_%x\n", sysmem.hi, sysmem.lo); /* The system top memory in 780. */ pci_write_config32(nb_dev, 0x90, sysmem.lo); @@ -826,12 +826,12 @@ static void single_port_configuration(device_t nb_dev, device_t dev) struct southbridge_amd_rs780_config *cfg = (struct southbridge_amd_rs780_config *)nb_dev->chip_info; - printk_info("rs780_gfx_init single_port_configuration.\n"); + printk(BIOS_INFO, "rs780_gfx_init single_port_configuration.\n"); /* step 12 training, releases hold training for GFX port 0 (device 2) */ PcieReleasePortTraining(nb_dev, dev, 2); result = PcieTrainPort(nb_dev, dev, 2); - printk_info("rs780_gfx_init single_port_configuration step12.\n"); + printk(BIOS_INFO, "rs780_gfx_init single_port_configuration step12.\n"); /* step 13 Power Down Control */ /* step 13.1 Enables powering down transmitter and receiver pads along with PLL macros. */ @@ -851,7 +851,7 @@ static void single_port_configuration(device_t nb_dev, device_t dev) set_pcie_enable_bits(dev, 0xA2, 0xFF, 0x1); reg32 = nbpcie_p_read_index(dev, 0x29); width = reg32 & 0xFF; - printk_debug("GFX Inactive Lanes = 0x%x.\n", width); + printk(BIOS_DEBUG, "GFX Inactive Lanes = 0x%x.\n", width); switch (width) { case 1: case 2: @@ -868,11 +868,11 @@ static void single_port_configuration(device_t nb_dev, device_t dev) break; } } - printk_info("rs780_gfx_init single_port_configuration step13.\n"); + printk(BIOS_INFO, "rs780_gfx_init single_port_configuration step13.\n"); /* step 14 Reset Enumeration Timer, disables the shortening of the enumeration timer */ set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19); - printk_info("rs780_gfx_init single_port_configuration step14.\n"); + printk(BIOS_INFO, "rs780_gfx_init single_port_configuration step14.\n"); } static void dual_port_configuration(device_t nb_dev, device_t dev) @@ -905,7 +905,7 @@ static void dual_port_configuration(device_t nb_dev, device_t dev) } else { /* step 16.b Link Training was successful */ reg32 = nbpcie_p_read_index(dev, 0xa2); width = (reg32 >> 4) & 0x7; - printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width); + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); switch (width) { case 1: case 2: @@ -983,7 +983,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) struct southbridge_amd_rs780_config *cfg = (struct southbridge_amd_rs780_config *)nb_dev->chip_info; - printk_info("rs780_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", + printk(BIOS_INFO, "rs780_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", nb_dev, dev, port); /* GFX Core Initialization */ @@ -995,13 +995,13 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) if (cfg->gfx_dual_slot) set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3); } - printk_info("rs780_gfx_init step1.\n"); + printk(BIOS_INFO, "rs780_gfx_init step1.\n"); /* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */ /* AMD calls the configuration CrossFire */ if (cfg->gfx_dual_slot) set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8); - printk_info("rs780_gfx_init step2.\n"); + printk(BIOS_INFO, "rs780_gfx_init step2.\n"); /* step 2, TMDS, (only need if CMOS option is enabled) */ if (cfg->gfx_tmds) { @@ -1020,7 +1020,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) set_nbmisc_enable_bits(nb_dev, 0x28, 3 << 6 | 3 << 8 | 3 << 10, 1 << 6 | 1 << 8 | 1 << 10); reg32 = nbmisc_read_index(nb_dev, 0x28); - printk_info("misc 28 = %x\n", reg32); + printk(BIOS_INFO, "misc 28 = %x\n", reg32); /* 5.9.1.6.Selects the single ended GFX REFCLK to be the source for core logic. */ set_nbmisc_enable_bits(nb_dev, 0x6C, 1 << 31, 1 << 31); @@ -1038,7 +1038,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) set_nbmisc_enable_bits(nb_dev, 0x28, 3 << 6 | 3 << 8 | 3 << 10, 0); reg32 = nbmisc_read_index(nb_dev, 0x28); - printk_info("misc 28 = %x\n", reg32); + printk(BIOS_INFO, "misc 28 = %x\n", reg32); /* 5.9.1.6.Selects the single ended GFX REFCLK to be the source for core logic. */ set_nbmisc_enable_bits(nb_dev, 0x6C, 1 << 31, 0 << 31); @@ -1079,7 +1079,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) /* release hold training for device 2. GFX initialization is done. */ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4); dynamic_link_width_control(nb_dev, dev, cfg->gfx_link_width); - printk_info("rs780_gfx_init step7.\n"); + printk(BIOS_INFO, "rs780_gfx_init step7.\n"); return; } @@ -1087,11 +1087,11 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) /* 5.9.12.1 sets RCB timeout to be 25ms */ /* 5.9.12.2. RCB Cpl timeout on link down. */ set_pcie_enable_bits(dev, 0x70, 7 << 16 | 1 << 19, 4 << 16 | 1 << 19); - printk_info("rs780_gfx_init step5.9.12.1.\n"); + printk(BIOS_INFO, "rs780_gfx_init step5.9.12.1.\n"); /* step 5.9.12.3 disables slave ordering logic */ set_pcie_enable_bits(nb_dev, 0x20, 1 << 8, 1 << 8); - printk_info("rs780_gfx_init step5.9.12.3.\n"); + printk(BIOS_INFO, "rs780_gfx_init step5.9.12.3.\n"); /* step 5.9.12.4 sets DMA payload size to 64 bytes */ set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10); @@ -1113,7 +1113,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) /* 5.9.12.9 CMGOOD_OVERRIDE for end point initiated lane degradation. */ set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 17, 1 << 17); - printk_info("rs780_gfx_init step5.9.12.9.\n"); + printk(BIOS_INFO, "rs780_gfx_init step5.9.12.9.\n"); /* 5.9.12.10 Sets the timer in Config state from 20us to */ /* 5.9.12.11 De-asserts RX_EN in L0s. */ @@ -1188,7 +1188,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) dual_port_configuration(nb_dev, dev); break; default: - printk_info("Incorrect configuration of external gfx slot.\n"); + printk(BIOS_INFO, "Incorrect configuration of external gfx slot.\n"); break; } } diff --git a/src/southbridge/amd/rs780/rs780_ht.c b/src/southbridge/amd/rs780/rs780_ht.c index b3fa05a529..03d4f84645 100644 --- a/src/southbridge/amd/rs780/rs780_ht.c +++ b/src/southbridge/amd/rs780/rs780_ht.c @@ -53,7 +53,7 @@ static void pcie_init(struct device *dev) /* Enable pci error detecting */ u32 dword; - printk_info("pcie_init in rs780_ht.c\n"); + printk(BIOS_INFO, "pcie_init in rs780_ht.c\n"); /* System error enable */ dword = pci_read_config32(dev, 0x04); diff --git a/src/southbridge/amd/rs780/rs780_pcie.c b/src/southbridge/amd/rs780/rs780_pcie.c index b778af3aa6..186266b8f1 100644 --- a/src/southbridge/amd/rs780/rs780_pcie.c +++ b/src/southbridge/amd/rs780/rs780_pcie.c @@ -106,7 +106,7 @@ static void pcie_init(struct device *dev) /* Enable pci error detecting */ u32 dword; - printk_debug("pcie_init in rs780_pcie.c\n"); + printk(BIOS_DEBUG, "pcie_init in rs780_pcie.c\n"); /* System error enable */ dword = pci_read_config32(dev, 0x04); @@ -216,7 +216,7 @@ static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev) *****************************************************************/ void enable_pcie_bar3(device_t nb_dev) { - printk_debug("enable_pcie_bar3()\n"); + printk(BIOS_DEBUG, "enable_pcie_bar3()\n"); set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */ set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16); @@ -232,7 +232,7 @@ void enable_pcie_bar3(device_t nb_dev) *****************************************************************/ void disable_pcie_bar3(device_t nb_dev) { - printk_debug("disable_pcie_bar3()\n"); + printk(BIOS_DEBUG, "disable_pcie_bar3()\n"); pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */ ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS); @@ -255,7 +255,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port) u32 gfx_gpp_sb_sel; struct southbridge_amd_rs780_config *cfg = (struct southbridge_amd_rs780_config *)nb_dev->chip_info; - printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%p\n", nb_dev, dev, port); + printk(BIOS_DEBUG, "gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%p\n", nb_dev, dev, port); gfx_gpp_sb_sel = port >= 4 && port <= 8 ? PCIE_CORE_INDEX_GPPSB : /* 4,5,6,7,8 */ @@ -369,7 +369,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port) PcieReleasePortTraining(nb_dev, dev, port); if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) { u8 res = PcieTrainPort(nb_dev, dev, port); - printk_debug("PcieTrainPort port=0x%x result=%d\n", port, res); + printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res); if (res) { AtiPcieCfg.PortDetect |= 1 << port; } diff --git a/src/southbridge/amd/sb600/sb600.c b/src/southbridge/amd/sb600/sb600.c index 1e34786b77..d9b3dcc9e4 100644 --- a/src/southbridge/amd/sb600/sb600.c +++ b/src/southbridge/amd/sb600/sb600.c @@ -118,7 +118,7 @@ void sb600_enable(device_t dev) u32 devfn; - printk_debug("sb600_enable()\n"); + printk(BIOS_DEBUG, "sb600_enable()\n"); /* * 0:12.0 SATA bit 8 of sm_dev 0xac : 1 - enable, default + 32 * 3 @@ -220,7 +220,7 @@ void sb600_enable(device_t dev) index += 32 * 4; break; default: - printk_debug("unknown dev: %s deviceid=%4x\n", dev_path(dev), + printk(BIOS_DEBUG, "unknown dev: %s deviceid=%4x\n", dev_path(dev), deviceid); } } diff --git a/src/southbridge/amd/sb600/sb600_early_setup.c b/src/southbridge/amd/sb600/sb600_early_setup.c index 29c215adba..b7581ec352 100644 --- a/src/southbridge/amd/sb600/sb600_early_setup.c +++ b/src/southbridge/amd/sb600/sb600_early_setup.c @@ -284,16 +284,16 @@ static void sb600_devices_por_init(void) device_t dev; u8 byte; - printk_info("sb600_devices_por_init()\n"); + printk(BIOS_INFO, "sb600_devices_por_init()\n"); /* SMBus Device, BDF:0-20-0 */ - printk_info("sb600_devices_por_init(): SMBus Device, BDF:0-20-0\n"); + printk(BIOS_INFO, "sb600_devices_por_init(): SMBus Device, BDF:0-20-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); if (dev == PCI_DEV_INVALID) { die("SMBUS controller not found\r\n"); /* NOT REACHED */ } - printk_info("SMBus controller enabled, sb revision is 0x%x\r\n", + printk(BIOS_INFO, "SMBus controller enabled, sb revision is 0x%x\r\n", get_sb600_revision()); /* sbPorAtStartOfTblCfg */ @@ -372,7 +372,7 @@ static void sb600_devices_por_init(void) outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); /* IDE Device, BDF:0-20-1 */ - printk_info("sb600_devices_por_init(): IDE Device, BDF:0-20-1\n"); + printk(BIOS_INFO, "sb600_devices_por_init(): IDE Device, BDF:0-20-1\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x438C), 0); /* Disable prefetch */ byte = pci_read_config8(dev, 0x63); @@ -380,7 +380,7 @@ static void sb600_devices_por_init(void) pci_write_config8(dev, 0x63, byte); /* LPC Device, BDF:0-20-3 */ - printk_info("sb600_devices_por_init(): LPC Device, BDF:0-20-3\n"); + printk(BIOS_INFO, "sb600_devices_por_init(): LPC Device, BDF:0-20-3\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x438D), 0); /* DMA enable */ pci_write_config8(dev, 0x40, 0x04); @@ -417,7 +417,7 @@ static void sb600_devices_por_init(void) /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, * TODO: I don't know what are their mean? */ - printk_info("sb600_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); + printk(BIOS_INFO, "sb600_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); /* I don't know why CIM tried to write into a read-only reg! */ /*pci_write_config8(dev, 0x0c, 0x20) */ ; @@ -448,7 +448,7 @@ static void sb600_devices_por_init(void) pci_write_config8(dev, 0x50, 0x01); /* SATA Device, BDF:0-18-0, Non-Raid-5 SATA controller */ - printk_info("sb600_devices_por_init(): SATA Device, BDF:0-18-0\n"); + printk(BIOS_INFO, "sb600_devices_por_init(): SATA Device, BDF:0-18-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4380), 0); /*PHY Global Control, we are using A14. @@ -479,7 +479,7 @@ static void sb600_pmio_por_init(void) { u8 byte; - printk_info("sb600_pmio_por_init()\n"); + printk(BIOS_INFO, "sb600_pmio_por_init()\n"); /* K8KbRstEn, KB_RST# control for K8 system. */ byte = pmio_read(0x66); byte |= 0x20; @@ -676,7 +676,7 @@ static void sb600_before_pci_init(void) */ static void sb600_early_setup(void) { - printk_info("sb600_early_setup()\n"); + printk(BIOS_INFO, "sb600_early_setup()\n"); sb600_por_init(); } diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c index 95e3744db5..3ba1fe910e 100644 --- a/src/southbridge/amd/sb600/sb600_hda.c +++ b/src/southbridge/amd/sb600/sb600_hda.c @@ -86,7 +86,7 @@ no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ set_bits(base + 0x08, 1, 0); - printk_debug("No codec!\n"); + printk(BIOS_DEBUG, "No codec!\n"); return 0; } @@ -156,9 +156,9 @@ static u32 find_verb(u32 viddid, u32 ** verb) device_t azalia_dev = dev_find_slot(0, PCI_DEVFN(0x14, 2)); struct southbridge_amd_sb600_config *cfg = (struct southbridge_amd_sb600_config *)azalia_dev->chip_info; - printk_debug("Dev=%s\n", dev_path(azalia_dev)); - printk_debug("Default viddid=%x\n", cfg->hda_viddid); - printk_debug("Reading viddid=%x\n", viddid); + printk(BIOS_DEBUG, "Dev=%s\n", dev_path(azalia_dev)); + printk(BIOS_DEBUG, "Default viddid=%x\n", cfg->hda_viddid); + printk(BIOS_DEBUG, "Reading viddid=%x\n", viddid); if (!cfg) return 0; if (viddid != cfg->hda_viddid) @@ -232,15 +232,15 @@ static void codec_init(u32 base, int addr) dword = read32(base + 0x64); /* 2 */ - printk_debug("codec viddid: %08x\n", dword); + printk(BIOS_DEBUG, "codec viddid: %08x\n", dword); verb_size = find_verb(dword, &verb); if (!verb_size) { - printk_debug("No verb!\n"); + printk(BIOS_DEBUG, "No verb!\n"); return; } - printk_debug("verb_size: %d\n", verb_size); + printk(BIOS_DEBUG, "verb_size: %d\n", verb_size); /* 3 */ for (i = 0; i < verb_size; i++) { if (wait_for_ready(base) == -1) @@ -251,7 +251,7 @@ static void codec_init(u32 base, int addr) if (wait_for_valid(base) == -1) return; } - printk_debug("verb loaded!\n"); + printk(BIOS_DEBUG, "verb loaded!\n"); } static void codecs_init(u32 base, u32 codec_mask) @@ -302,11 +302,11 @@ static void hda_init(struct device *dev) return; base = ((u32)res->base); - printk_debug("base = 0x%x\n", base); + printk(BIOS_DEBUG, "base = 0x%x\n", base); codec_mask = codec_detect(base); if (codec_mask) { - printk_debug("codec_mask = %02x\n", codec_mask); + printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); codecs_init(base, codec_mask); } } diff --git a/src/southbridge/amd/sb600/sb600_lpc.c b/src/southbridge/amd/sb600/sb600_lpc.c index a79cef9cf4..1f3253f55b 100644 --- a/src/southbridge/amd/sb600/sb600_lpc.c +++ b/src/southbridge/amd/sb600/sb600_lpc.c @@ -130,8 +130,7 @@ static void sb600_lpc_enable_childrens_resources(device_t dev) continue; base = res->base; end = resource_end(res); - printk_debug - ("sb600 lpc decode:%s, base=0x%08x, end=0x%08x\n", + printk(BIOS_DEBUG, "sb600 lpc decode:%s, base=0x%08x, end=0x%08x\n", dev_path(child), base, end); switch (base) { case 0x60: /* KB */ diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c index 251f5ad2f0..0feebac92f 100644 --- a/src/southbridge/amd/sb600/sb600_sata.c +++ b/src/southbridge/amd/sb600/sb600_sata.c @@ -35,22 +35,22 @@ static int sata_drive_detect(int portnum, u16 iobar) while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), (byte != (0xA0 + 0x10 * (portnum % 2))) || ((byte2 & 0x88) != 0)) { - printk_spew("0x6=%x, 0x7=%x\n", byte, byte2); + printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); if (byte != (0xA0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the * second SATA port is poulated. */ - printk_debug("drive no longer selected after %i ms, " + printk(BIOS_DEBUG, "drive no longer selected after %i ms, " "retrying init\n", i * 10); return 1; } else - printk_spew("drive detection not yet completed, " + printk(BIOS_SPEW, "drive detection not yet completed, " "waiting...\n"); mdelay(10); i++; } - printk_spew("drive detection done after %i ms\n", i * 10); + printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10); return 0; } @@ -91,12 +91,12 @@ static void sata_init(struct device *dev) sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; - printk_spew("sata_bar0=%x\n", sata_bar0); /* 3030 */ - printk_spew("sata_bar1=%x\n", sata_bar1); /* 3070 */ - printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ - printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ - printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */ - printk_spew("sata_bar5=%x\n", sata_bar5); /* e0309000 */ + printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ + printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */ + printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */ + printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */ + printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk(BIOS_SPEW, "sata_bar5=%x\n", sata_bar5); /* e0309000 */ /* Program the 2C to 0x43801002 */ dword = 0x43801002; @@ -173,13 +173,13 @@ static void sata_init(struct device *dev) for (i = 0; i < 4; i++) { byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk_spew("SATA port %i status = %x\n", i, byte); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; if( byte == 0x1 ) { /* If the drive status is 0x1 then we see it but we aren't talking to it. */ /* Try to do something about it. */ - printk_spew("SATA device detected but not talking. Trying lower speed.\n"); + printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); /* Read in Port-N Serial ATA Control Register */ byte = read8(sata_bar5 + 0x12C + 0x80 * i); @@ -200,7 +200,7 @@ static void sata_init(struct device *dev) /* Reread status */ byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk_spew("SATA port %i status = %x\n", i, byte); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; } @@ -209,13 +209,13 @@ static void sata_init(struct device *dev) if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) break; } - printk_debug("%s %s device is %sready after %i tries\n", + printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", (j == 10) ? "not " : "", (j == 10) ? j : j + 1); } else { - printk_debug("No %s %s SATA drive on Slot%i\n", + printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", i); } @@ -240,7 +240,7 @@ static void sata_init(struct device *dev) /* word = pm_ioread(0x28); */ /* byte = pm_ioread(0x29); */ /* word |= byte<<8; */ - /* printk_debug("AcpiGpe0Blk addr = %x\n", word); */ + /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */ /* write32(word, 0x80000000); */ } diff --git a/src/southbridge/amd/sb600/sb600_sm.c b/src/southbridge/amd/sb600/sb600_sm.c index 8e275291ba..6a18bfeea5 100644 --- a/src/southbridge/amd/sb600/sb600_sm.c +++ b/src/southbridge/amd/sb600/sb600_sm.c @@ -54,7 +54,7 @@ static void sm_init(device_t dev) u32 on; u32 nmi_option; - printk_info("sm_init().\n"); + printk(BIOS_INFO, "sm_init().\n"); ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */ /* Don't rename APIC ID */ @@ -98,7 +98,7 @@ static void sm_init(device_t dev) } byte |= 1 << 2; pm_iowrite(0x74, byte); - printk_info("set power %s after power fail\n", on ? "on" : "off"); + printk(BIOS_INFO, "set power %s after power fail\n", on ? "on" : "off"); /* sb600 rpr:2.3.3: */ byte = pm_ioread(0x9A); @@ -154,10 +154,10 @@ static void sm_init(device_t dev) get_option(&nmi_option, "nmi"); if (nmi_option) { byte &= ~(1 << 7); /* set NMI */ - printk_info("++++++++++set NMI+++++\n"); + printk(BIOS_INFO, "++++++++++set NMI+++++\n"); } else { byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */ - printk_info("++++++++++no set NMI+++++\n"); + printk(BIOS_INFO, "++++++++++no set NMI+++++\n"); } byte &= ~(1 << 7); if (byte != byte_old) { @@ -197,9 +197,9 @@ static void sm_init(device_t dev) /* 3.12: Enabling AB and BIF Clock Gating */ abcfg_reg(0x10054, 0xFFFF0000, 0x1040000); abcfg_reg(0x54, 0xFF << 16, 4 << 16); - printk_info("3.11, ABCFG:0x54\n"); + printk(BIOS_INFO, "3.11, ABCFG:0x54\n"); abcfg_reg(0x54, 1 << 24, 1 << 24); - printk_info("3.12, ABCFG:0x54\n"); + printk(BIOS_INFO, "3.12, ABCFG:0x54\n"); abcfg_reg(0x98, 0x0000FF00, 0x00004700); /* 3.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */ @@ -211,7 +211,7 @@ static void sm_init(device_t dev) abcfg_reg(0x10098, 0xFFFFFFFF, 0x4000); abcfg_reg(0x04, 0xFFFFFFFF, 0x6); - printk_info("sm_init() end\n"); + printk(BIOS_INFO, "sm_init() end\n"); /* Enable NbSb virtual channel */ axcfg_reg(0x114, 0x3f << 1, 0 << 1); diff --git a/src/southbridge/amd/sb600/sb600_smbus.c b/src/southbridge/amd/sb600/sb600_smbus.c index df7ec56c3e..9e14930b09 100644 --- a/src/southbridge/amd/sb600/sb600_smbus.c +++ b/src/southbridge/amd/sb600/sb600_smbus.c @@ -188,7 +188,7 @@ static void alink_ab_indx(u32 reg_space, u32 reg_addr, tmp &= ~mask; tmp |= val; - /* printk_debug("about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ + /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ outl(tmp, AB_DATA); } diff --git a/src/southbridge/amd/sb600/sb600_usb.c b/src/southbridge/amd/sb600/sb600_usb.c index 134e12560e..b6e1fbec6b 100644 --- a/src/southbridge/amd/sb600/sb600_usb.c +++ b/src/southbridge/amd/sb600/sb600_usb.c @@ -94,7 +94,7 @@ static void usb_init2(struct device *dev) /* pci_write_config32(dev, 0xf8, dword); */ usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF; - printk_info("usb2_bar0=0x%x\n", usb2_bar0); + printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0); /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ dword = 0x00020F00; diff --git a/src/southbridge/amd/sb700/sb700.c b/src/southbridge/amd/sb700/sb700.c index 4bbde6dba2..39ae3a6b34 100644 --- a/src/southbridge/amd/sb700/sb700.c +++ b/src/southbridge/amd/sb700/sb700.c @@ -118,7 +118,7 @@ void sb700_enable(device_t dev) u32 devfn; - printk_debug("sb700_enable()\n"); + printk(BIOS_DEBUG, "sb700_enable()\n"); /* * 0:11.0 SATA bit 8 of sm_dev 0xac : 1 - enable, default + 32 * 3 @@ -221,7 +221,7 @@ void sb700_enable(device_t dev) index = 4; break; default: - printk_debug("unknown dev: %s deviceid=%4x\n", dev_path(dev), + printk(BIOS_DEBUG, "unknown dev: %s deviceid=%4x\n", dev_path(dev), deviceid); } } diff --git a/src/southbridge/amd/sb700/sb700_early_setup.c b/src/southbridge/amd/sb700/sb700_early_setup.c index a063c70cf9..3777bd6288 100644 --- a/src/southbridge/amd/sb700/sb700_early_setup.c +++ b/src/southbridge/amd/sb700/sb700_early_setup.c @@ -300,16 +300,16 @@ static void sb700_devices_por_init(void) device_t dev; u8 byte; - printk_info("sb700_devices_por_init()\n"); + printk(BIOS_INFO, "sb700_devices_por_init()\n"); /* SMBus Device, BDF:0-20-0 */ - printk_info("sb700_devices_por_init(): SMBus Device, BDF:0-20-0\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): SMBus Device, BDF:0-20-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); if (dev == PCI_DEV_INVALID) { die("SMBUS controller not found\r\n"); /* NOT REACHED */ } - printk_info("SMBus controller enabled, sb revision is A%x\r\n", + printk(BIOS_INFO, "SMBus controller enabled, sb revision is A%x\r\n", set_sb700_revision()); /* sbPorAtStartOfTblCfg */ @@ -378,7 +378,7 @@ static void sb700_devices_por_init(void) outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); /* IDE Device, BDF:0-20-1 */ - printk_info("sb700_devices_por_init(): IDE Device, BDF:0-20-1\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): IDE Device, BDF:0-20-1\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x439C), 0); /* Disable prefetch */ byte = pci_read_config8(dev, 0x63); @@ -386,7 +386,7 @@ static void sb700_devices_por_init(void) pci_write_config8(dev, 0x63, byte); /* LPC Device, BDF:0-20-3 */ - printk_info("sb700_devices_por_init(): LPC Device, BDF:0-20-3\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): LPC Device, BDF:0-20-3\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0); /* DMA enable */ pci_write_config8(dev, 0x40, 0x04); @@ -423,7 +423,7 @@ static void sb700_devices_por_init(void) /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, */ - printk_info("sb700_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); /* Arbiter enable. */ @@ -440,7 +440,7 @@ static void sb700_devices_por_init(void) pci_write_config8(dev, 0x50, 0x01); /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ - printk_info("sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); /*PHY Global Control*/ @@ -457,7 +457,7 @@ static void sb700_pmio_por_init(void) { u8 byte; - printk_info("sb700_pmio_por_init()\n"); + printk(BIOS_INFO, "sb700_pmio_por_init()\n"); /* K8KbRstEn, KB_RST# control for K8 system. */ byte = pmio_read(0x66); byte |= 0x20; @@ -602,7 +602,7 @@ static void sb700_before_pci_init(void) */ static void sb700_early_setup(void) { - printk_info("sb700_early_setup()\n"); + printk(BIOS_INFO, "sb700_early_setup()\n"); sb700_por_init(); } diff --git a/src/southbridge/amd/sb700/sb700_hda.c b/src/southbridge/amd/sb700/sb700_hda.c index 2f55c944c7..af1361692a 100644 --- a/src/southbridge/amd/sb700/sb700_hda.c +++ b/src/southbridge/amd/sb700/sb700_hda.c @@ -86,7 +86,7 @@ no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ set_bits(base + 0x08, 1, 0); - printk_debug("No codec!\n"); + printk(BIOS_DEBUG, "No codec!\n"); return 0; } @@ -150,7 +150,7 @@ static void codec_init(u32 base, int addr) dword = read32(base + 0x64); /* 2 */ - printk_debug("%x(th) codec viddid: %08x\n", addr, dword); + printk(BIOS_DEBUG, "%x(th) codec viddid: %08x\n", addr, dword); } static void codecs_init(u32 base, u32 codec_mask) @@ -203,11 +203,11 @@ static void hda_init(struct device *dev) return; base = (u32)res->base; - printk_debug("base = 0x%x\n", base); + printk(BIOS_DEBUG, "base = 0x%x\n", base); codec_mask = codec_detect(base); if (codec_mask) { - printk_debug("codec_mask = %02x\n", codec_mask); + printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); codecs_init(base, codec_mask); } } diff --git a/src/southbridge/amd/sb700/sb700_lpc.c b/src/southbridge/amd/sb700/sb700_lpc.c index b6d7818160..3bc160827d 100644 --- a/src/southbridge/amd/sb700/sb700_lpc.c +++ b/src/southbridge/amd/sb700/sb700_lpc.c @@ -143,8 +143,7 @@ static void sb700_lpc_enable_childrens_resources(device_t dev) continue; base = res->base; end = resource_end(res); - printk_debug - ("sb700 lpc decode:%s, base=0x%08x, end=0x%08x\n", + printk(BIOS_DEBUG, "sb700 lpc decode:%s, base=0x%08x, end=0x%08x\n", dev_path(child), base, end); switch (base) { case 0x60: /* KB */ diff --git a/src/southbridge/amd/sb700/sb700_sata.c b/src/southbridge/amd/sb700/sb700_sata.c index cd5084e745..48c192c95d 100644 --- a/src/southbridge/amd/sb700/sb700_sata.c +++ b/src/southbridge/amd/sb700/sb700_sata.c @@ -34,22 +34,22 @@ int sata_drive_detect(int portnum, u16 iobar) while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), (byte != (0xA0 + 0x10 * (portnum % 2))) || ((byte2 & 0x88) != 0)) { - printk_spew("0x6=%x, 0x7=%x\n", byte, byte2); + printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); if (byte != (0xA0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the * second SATA port is poulated. */ - printk_debug("drive no longer selected after %i ms, " + printk(BIOS_DEBUG, "drive no longer selected after %i ms, " "retrying init\n", i * 10); return 1; } else - printk_spew("drive detection not yet completed, " + printk(BIOS_SPEW, "drive detection not yet completed, " "waiting...\n"); mdelay(10); i++; } - printk_spew("drive detection done after %i ms\n", i * 10); + printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10); return 0; } @@ -96,12 +96,12 @@ static void sata_init(struct device *dev) sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; - printk_spew("sata_bar0=%x\n", sata_bar0); /* 3030 */ - printk_spew("sata_bar1=%x\n", sata_bar1); /* 3070 */ - printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ - printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ - printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */ - printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */ + printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ + printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */ + printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */ + printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */ + printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */ /* disable combined mode */ byte = pci_read_config8(sm_dev, 0xAD); @@ -199,12 +199,12 @@ static void sata_init(struct device *dev) for (i = 0; i < 4; i++) { byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk_spew("SATA port %i status = %x\n", i, byte); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; if( byte == 0x1 ) { /* If the drive status is 0x1 then we see it but we aren't talking to it. */ /* Try to do something about it. */ - printk_spew("SATA device detected but not talking. Trying lower speed.\n"); + printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); /* Read in Port-N Serial ATA Control Register */ byte = read8(sata_bar5 + 0x12C + 0x80 * i); @@ -225,7 +225,7 @@ static void sata_init(struct device *dev) /* Reread status */ byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk_spew("SATA port %i status = %x\n", i, byte); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; } @@ -234,13 +234,13 @@ static void sata_init(struct device *dev) if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) break; } - printk_debug("%s %s device is %sready after %i tries\n", + printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", (j == 10) ? "not " : "", (j == 10) ? j : j + 1); } else { - printk_debug("No %s %s SATA drive on Slot%i\n", + printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", i); } @@ -267,7 +267,7 @@ static void sata_init(struct device *dev) /* word = pm_ioread(0x28); */ /* byte = pm_ioread(0x29); */ /* word |= byte<<8; */ - /* printk_debug("AcpiGpe0Blk addr = %x\n", word); */ + /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */ /* write32(word, 0x80000000); */ } diff --git a/src/southbridge/amd/sb700/sb700_sm.c b/src/southbridge/amd/sb700/sb700_sm.c index dbd7a6ab02..d053aff0fd 100644 --- a/src/southbridge/amd/sb700/sb700_sm.c +++ b/src/southbridge/amd/sb700/sb700_sm.c @@ -54,7 +54,7 @@ static void sm_init(device_t dev) u32 on; u32 nmi_option; - printk_info("sm_init().\n"); + printk(BIOS_INFO, "sm_init().\n"); ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */ /* Don't rename APIC ID */ @@ -118,7 +118,7 @@ static void sm_init(device_t dev) } byte |= 1 << 2; pm_iowrite(0x74, byte); - printk_info("set power %s after power fail\n", on ? "on" : "off"); + printk(BIOS_INFO, "set power %s after power fail\n", on ? "on" : "off"); byte = pm_ioread(0x68); byte &= ~(1 << 1); @@ -152,10 +152,10 @@ static void sm_init(device_t dev) get_option(&nmi_option, "nmi"); if (nmi_option) { byte &= ~(1 << 7); /* set NMI */ - printk_info("++++++++++set NMI+++++\n"); + printk(BIOS_INFO, "++++++++++set NMI+++++\n"); } else { byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */ - printk_info("++++++++++no set NMI+++++\n"); + printk(BIOS_INFO, "++++++++++no set NMI+++++\n"); } byte &= ~(1 << 7); if (byte != byte_old) { @@ -217,7 +217,7 @@ static void sm_init(device_t dev) byte &= ~(1 << 1); pm_iowrite(0x59, byte); - printk_info("sm_init() end\n"); + printk(BIOS_INFO, "sm_init() end\n"); /* Enable NbSb virtual channel */ axcfg_reg(0x114, 0x3f << 1, 0 << 1); diff --git a/src/southbridge/amd/sb700/sb700_smbus.c b/src/southbridge/amd/sb700/sb700_smbus.c index 91bbea852d..7ba2a7d264 100644 --- a/src/southbridge/amd/sb700/sb700_smbus.c +++ b/src/southbridge/amd/sb700/sb700_smbus.c @@ -196,7 +196,7 @@ static void alink_ab_indx(u32 reg_space, u32 reg_addr, tmp &= ~mask; tmp |= val; - /* printk_debug("about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ + /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ outl(tmp, AB_DATA); reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL; diff --git a/src/southbridge/amd/sb700/sb700_usb.c b/src/southbridge/amd/sb700/sb700_usb.c index 63679b8847..d2dcf852f2 100644 --- a/src/southbridge/amd/sb700/sb700_usb.c +++ b/src/southbridge/amd/sb700/sb700_usb.c @@ -82,7 +82,7 @@ static void usb_init2(struct device *dev) /* pci_write_config32(dev, 0xf8, dword); */ usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF; - printk_info("usb2_bar0=0x%x\n", usb2_bar0); + printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0); /* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ dword = 0x00020F00; @@ -163,7 +163,7 @@ static void usb_init2(struct device *dev) dword |= 1 << 8; dword &= ~(1 << 27); /* 6.23 */ } - printk_debug("rpr 6.23, final dword=%x\n", dword); + printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword); #endif } diff --git a/src/southbridge/broadcom/bcm21000/bcm21000_pcie.c b/src/southbridge/broadcom/bcm21000/bcm21000_pcie.c index ef3f4509ee..4027f48e7c 100644 --- a/src/southbridge/broadcom/bcm21000/bcm21000_pcie.c +++ b/src/southbridge/broadcom/bcm21000/bcm21000_pcie.c @@ -33,7 +33,7 @@ static void pcie_init(struct device *dev) uint32_t dword; uint32_t msicap; - printk_debug("PCIE enable.... dev= %s\n",dev_path(dev)); + printk(BIOS_DEBUG, "PCIE enable.... dev= %s\n",dev_path(dev)); /* System error enable */ dword = pci_read_config32(dev, 0x04); diff --git a/src/southbridge/broadcom/bcm5785/bcm5785_lpc.c b/src/southbridge/broadcom/bcm5785/bcm5785_lpc.c index 85f9eaf6c4..481d68c74f 100644 --- a/src/southbridge/broadcom/bcm5785/bcm5785_lpc.c +++ b/src/southbridge/broadcom/bcm5785/bcm5785_lpc.c @@ -86,7 +86,7 @@ static void bcm5785_lpc_enable_childrens_resources(device_t dev) if(!(res->flags & IORESOURCE_IO)) continue; base = res->base; end = resource_end(res); - printk_debug("bcm5785lpc decode:%s, base=0x%08x, end=0x%08x\r\n",dev_path(child),base, end); + printk(BIOS_DEBUG, "bcm5785lpc decode:%s, base=0x%08x, end=0x%08x\r\n",dev_path(child),base, end); switch(base) { case 0x60: //KBC case 0x64: diff --git a/src/southbridge/broadcom/bcm5785/bcm5785_sata.c b/src/southbridge/broadcom/bcm5785/bcm5785_sata.c index 6818e6a2b0..7cd9c27f35 100644 --- a/src/southbridge/broadcom/bcm5785/bcm5785_sata.c +++ b/src/southbridge/broadcom/bcm5785/bcm5785_sata.c @@ -49,17 +49,17 @@ static void sata_init(struct device *dev) //init PHY - printk_debug("init PHY...\n"); + printk(BIOS_DEBUG, "init PHY...\n"); for(i=0; i<4; i++) { mmio = base + 0x100 * i; byte = read8(mmio + 0x40); - printk_debug("port %d PHY status = %02x\r\n", i, byte); + printk(BIOS_DEBUG, "port %d PHY status = %02x\r\n", i, byte); if(byte & 0x4) {// bit 2 is set byte = read8(mmio+0x48); write8(mmio + 0x48, byte | 1); write8(mmio + 0x48, byte & (~1)); byte = read8(mmio + 0x40); - printk_debug("after reset port %d PHY status = %02x\r\n", i, byte); + printk(BIOS_DEBUG, "after reset port %d PHY status = %02x\r\n", i, byte); } } diff --git a/src/southbridge/intel/esb6300/esb6300_ehci.c b/src/southbridge/intel/esb6300/esb6300_ehci.c index 313504866e..8c20c0325f 100644 --- a/src/southbridge/intel/esb6300/esb6300_ehci.c +++ b/src/southbridge/intel/esb6300/esb6300_ehci.c @@ -9,12 +9,12 @@ static void ehci_init(struct device *dev) { uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/esb6300/esb6300_ide.c b/src/southbridge/intel/esb6300/esb6300_ide.c index eca8a3fefa..e56393722a 100644 --- a/src/southbridge/intel/esb6300/esb6300_ide.c +++ b/src/southbridge/intel/esb6300/esb6300_ide.c @@ -26,7 +26,7 @@ static void ide_init(struct device *dev) word |= (1 << 15); pci_write_config16(dev, 0x42, word); #endif - printk_debug("IDE Enabled\n"); + printk(BIOS_DEBUG, "IDE Enabled\n"); } static void esb6300_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/esb6300/esb6300_lpc.c b/src/southbridge/intel/esb6300/esb6300_lpc.c index 09caeb729f..c25771aa0a 100644 --- a/src/southbridge/intel/esb6300/esb6300_lpc.c +++ b/src/southbridge/intel/esb6300/esb6300_lpc.c @@ -288,7 +288,7 @@ static void lpc_init(struct device *dev) byte |= 1; } pci_write_config8(dev, 0xa4, byte); - printk_info("set power %s after power fail\n", pwr_on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); /* Set up the PIRQ */ esb6300_pirq_init(dev); diff --git a/src/southbridge/intel/esb6300/esb6300_sata.c b/src/southbridge/intel/esb6300/esb6300_sata.c index 0bedd93a9a..c26b7c4d12 100644 --- a/src/southbridge/intel/esb6300/esb6300_sata.c +++ b/src/southbridge/intel/esb6300/esb6300_sata.c @@ -13,7 +13,7 @@ static void sata_init(struct device *dev) /* Enable SATA devices */ - printk_debug("SATA init\n"); + printk(BIOS_DEBUG, "SATA init\n"); /* SATA configuration */ pci_write_config8(dev, 0x04, 0x07); pci_write_config8(dev, 0x09, 0x8f); @@ -41,7 +41,7 @@ static void sata_init(struct device *dev) pci_write_config16(dev, 0xa0, 0x0040); pci_write_config32(dev, 0xa4, 0x00220043); - printk_debug("SATA Enabled\n"); + printk(BIOS_DEBUG, "SATA Enabled\n"); } static void esb6300_sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/esb6300/esb6300_uhci.c b/src/southbridge/intel/esb6300/esb6300_uhci.c index 9184ed24e4..10b1dfa1cc 100644 --- a/src/southbridge/intel/esb6300/esb6300_uhci.c +++ b/src/southbridge/intel/esb6300/esb6300_uhci.c @@ -10,13 +10,13 @@ static void uhci_init(struct device *dev) uint32_t cmd; #if 1 - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } diff --git a/src/southbridge/intel/i3100/i3100_lpc.c b/src/southbridge/intel/i3100/i3100_lpc.c index 2d3b1fbf6f..4612c916d2 100644 --- a/src/southbridge/intel/i3100/i3100_lpc.c +++ b/src/southbridge/intel/i3100/i3100_lpc.c @@ -232,7 +232,7 @@ static void i3100_power_options(device_t dev) { /* minimum asssertion is 1 to 2 RTCCLK */ reg8 &= ~(1 << 3); pci_write_config8(dev, GEN_PMCON_3, reg8); - printk_info("set power %s after power fail\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ reg8 = inb(0x61); @@ -251,11 +251,11 @@ static void i3100_power_options(device_t dev) { get_option(&nmi_option, "nmi"); if (nmi_option) { /* Set NMI. */ - printk_info ("NMI sources enabled.\n"); + printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); } else { /* Can't mask NMI from PCI-E and NMI_NOW */ - printk_info ("NMI sources disabled.\n"); + printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= ( 1 << 7); } outb(reg8, 0x70); diff --git a/src/southbridge/intel/i3100/i3100_pciexp_portb.c b/src/southbridge/intel/i3100/i3100_pciexp_portb.c index a987da02f5..31502a46de 100644 --- a/src/southbridge/intel/i3100/i3100_pciexp_portb.c +++ b/src/southbridge/intel/i3100/i3100_pciexp_portb.c @@ -46,12 +46,12 @@ static unsigned int pcie_scan_bridge(struct device *dev, unsigned int max) int flag = 0; do { val = pci_read_config16(dev, PCIE_LSTS); - printk_debug("pcie portb link status: %02x\n", val); + printk(BIOS_DEBUG, "pcie portb link status: %02x\n", val); if ((val & (1<<10)) && (!flag)) { /* training error */ ctl = pci_read_config16(dev, PCIE_LCTL); pci_write_config16(dev, PCIE_LCTL, (ctl | (1<<5))); val = pci_read_config16(dev, PCIE_LSTS); - printk_debug("pcie portb reset link status: %02x\n", val); + printk(BIOS_DEBUG, "pcie portb reset link status: %02x\n", val); flag=1; hard_reset(); } diff --git a/src/southbridge/intel/i3100/i3100_sata.c b/src/southbridge/intel/i3100/i3100_sata.c index a124d10d11..cafb68fe0d 100644 --- a/src/southbridge/intel/i3100/i3100_sata.c +++ b/src/southbridge/intel/i3100/i3100_sata.c @@ -53,7 +53,7 @@ static void sata_init(struct device *dev) ahci = (pci_read_config8(dev, SATA_MAP) >> 6) & 0x03; /* Enable SATA devices */ - printk_info("SATA init (%s mode)\n", ahci ? "AHCI" : "Legacy"); + printk(BIOS_INFO, "SATA init (%s mode)\n", ahci ? "AHCI" : "Legacy"); if(ahci) { /* AHCI mode */ @@ -97,7 +97,7 @@ static void sata_init(struct device *dev) pci_write_config8(dev, SATA_PCS + 1, 0x0f); } - printk_debug("SATA Enabled\n"); + printk(BIOS_DEBUG, "SATA Enabled\n"); } static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82371eb/i82371eb_ide.c b/src/southbridge/intel/i82371eb/i82371eb_ide.c index 0e91839fb2..f1b618fa71 100644 --- a/src/southbridge/intel/i82371eb/i82371eb_ide.c +++ b/src/southbridge/intel/i82371eb/i82371eb_ide.c @@ -48,14 +48,14 @@ static void ide_init_enable(struct device *dev) reg16 = pci_read_config16(dev, IDETIM_PRI); reg16 = ONOFF(conf->ide0_enable, reg16, IDE_DECODE_ENABLE); pci_write_config16(dev, IDETIM_PRI, reg16); - printk_debug("IDE: %s: %s\n", "Primary IDE interface", + printk(BIOS_DEBUG, "IDE: %s: %s\n", "Primary IDE interface", conf->ide0_enable ? "on" : "off"); /* Enable/disable the secondary IDE interface. */ reg16 = pci_read_config16(dev, IDETIM_SEC); reg16 = ONOFF(conf->ide1_enable, reg16, IDE_DECODE_ENABLE); pci_write_config16(dev, IDETIM_SEC, reg16); - printk_debug("IDE: %s: %s\n", "Secondary IDE interface", + printk(BIOS_DEBUG, "IDE: %s: %s\n", "Secondary IDE interface", conf->ide1_enable ? "on" : "off"); /* Enable access to the legacy IDE ports (both primary and secondary), @@ -67,7 +67,7 @@ static void ide_init_enable(struct device *dev) reg16 = ONOFF(conf->ide_legacy_enable, reg16, (PCI_COMMAND_IO | PCI_COMMAND_MASTER)); pci_write_config16(dev, PCI_COMMAND, reg16); - printk_debug("IDE: Access to legacy IDE ports: %s\n", + printk(BIOS_DEBUG, "IDE: Access to legacy IDE ports: %s\n", conf->ide_legacy_enable ? "on" : "off"); } } @@ -96,10 +96,10 @@ static void ide_init_udma33(struct device *dev) reg8 = ONOFF(conf->ide0_drive1_udma33_enable, reg8, PSDE1); pci_write_config8(dev, UDMACTL, reg8); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Primary IDE interface", 0, conf->ide0_drive0_udma33_enable ? "on" : "off"); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Primary IDE interface", 1, conf->ide0_drive1_udma33_enable ? "on" : "off"); } @@ -111,10 +111,10 @@ static void ide_init_udma33(struct device *dev) reg8 = ONOFF(conf->ide1_drive1_udma33_enable, reg8, SSDE1); pci_write_config8(dev, UDMACTL, reg8); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Secondary IDE interface", 0, conf->ide1_drive0_udma33_enable ? "on" : "off"); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Secondary IDE interface", 1, conf->ide1_drive1_udma33_enable ? "on" : "off"); } diff --git a/src/southbridge/intel/i82801ax/i82801ax_ide.c b/src/southbridge/intel/i82801ax/i82801ax_ide.c index c13fb4d34a..2daa986bd4 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_ide.c +++ b/src/southbridge/intel/i82801ax/i82801ax_ide.c @@ -43,9 +43,9 @@ static void ide_init(struct device *dev) if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0: Primary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { - printk_info("IDE0: Primary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -54,9 +54,9 @@ static void ide_init(struct device *dev) if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1: Secondary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { - printk_info("IDE1: Secondary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801ax/i82801ax_lpc.c b/src/southbridge/intel/i82801ax/i82801ax_lpc.c index e42bac3449..3f0323bd0e 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_lpc.c +++ b/src/southbridge/intel/i82801ax/i82801ax_lpc.c @@ -92,14 +92,14 @@ void i82801ax_enable_apic(struct device *dev) reg32 |= (1 << 1); /* Delayed transaction enable */ reg32 |= (1 << 2); /* DMA collection buffer enable */ pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); *ioapic_index = 0; *ioapic_data = (1 << 25); *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", reg32); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); if (reg32 != (1 << 25)) die("APIC Error\n"); @@ -189,7 +189,7 @@ static void i82801ax_power_options(device_t dev) * 1 == S5 Soft Off */ pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); - printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ byte = inb(0x61); diff --git a/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c index a3f7e7c9fd..32a1085a76 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c +++ b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c @@ -30,11 +30,11 @@ static void usb_ehci_init(struct device *dev) /* TODO: Is any special init really needed? */ uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, diff --git a/src/southbridge/intel/i82801ax/i82801ax_watchdog.c b/src/southbridge/intel/i82801ax/i82801ax_watchdog.c index aea10e1c7b..fb45f521c5 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_watchdog.c +++ b/src/southbridge/intel/i82801ax/i82801ax_watchdog.c @@ -50,5 +50,5 @@ void watchdog_off(void) outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("ICH Watchdog disabled\r\n"); + printk(BIOS_DEBUG, "ICH Watchdog disabled\r\n"); } diff --git a/src/southbridge/intel/i82801bx/i82801bx_ide.c b/src/southbridge/intel/i82801bx/i82801bx_ide.c index 9bfab00399..ffbaf80dbd 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_ide.c +++ b/src/southbridge/intel/i82801bx/i82801bx_ide.c @@ -43,9 +43,9 @@ static void ide_init(struct device *dev) if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0: Primary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { - printk_info("IDE0: Primary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -54,9 +54,9 @@ static void ide_init(struct device *dev) if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1: Secondary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { - printk_info("IDE1: Secondary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801bx/i82801bx_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_lpc.c index 0d7e09c931..c63de08c2a 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_lpc.c +++ b/src/southbridge/intel/i82801bx/i82801bx_lpc.c @@ -92,14 +92,14 @@ void i82801bx_enable_apic(struct device *dev) reg32 |= (1 << 1); /* Delayed transaction enable */ reg32 |= (1 << 2); /* DMA collection buffer enable */ pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); *ioapic_index = 0; *ioapic_data = (1 << 25); *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", reg32); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); if (reg32 != (1 << 25)) die("APIC Error\n"); @@ -189,7 +189,7 @@ static void i82801bx_power_options(device_t dev) * 1 == S5 Soft Off */ pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); - printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ byte = inb(0x61); diff --git a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c index 1e885e920d..29034444b4 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c +++ b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c @@ -30,11 +30,11 @@ static void usb_ehci_init(struct device *dev) /* TODO: Is any special init really needed? */ uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, diff --git a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c index aea10e1c7b..fb45f521c5 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c +++ b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c @@ -50,5 +50,5 @@ void watchdog_off(void) outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("ICH Watchdog disabled\r\n"); + printk(BIOS_DEBUG, "ICH Watchdog disabled\r\n"); } diff --git a/src/southbridge/intel/i82801cx/i82801cx_ide.c b/src/southbridge/intel/i82801cx/i82801cx_ide.c index 2506b2f329..74c442c52c 100644 --- a/src/southbridge/intel/i82801cx/i82801cx_ide.c +++ b/src/southbridge/intel/i82801cx/i82801cx_ide.c @@ -18,7 +18,7 @@ static void ide_init(struct device *dev) if (enable_primary) { /* Enable first ide interface */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0 "); + printk(BIOS_DEBUG, "IDE0 "); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -27,7 +27,7 @@ static void ide_init(struct device *dev) if (enable_secondary) { /* Enable secondary ide interface */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1 "); + printk(BIOS_DEBUG, "IDE1 "); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801cx/i82801cx_lpc.c b/src/southbridge/intel/i82801cx/i82801cx_lpc.c index 4785242a79..9ac3e8326b 100644 --- a/src/southbridge/intel/i82801cx/i82801cx_lpc.c +++ b/src/southbridge/intel/i82801cx/i82801cx_lpc.c @@ -35,7 +35,7 @@ void i82801cx_enable_ioapic( struct device *dev) dword |= (1 << 1); /* delay transaction enable */ dword |= (1 << 2); /* DMA collection buf enable */ pci_write_config32(dev, GEN_CNTL, dword); - printk_debug("ioapic southbridge enabled %x\n",dword); + printk(BIOS_DEBUG, "ioapic southbridge enabled %x\n",dword); // Must program the APIC's ID before using it @@ -45,7 +45,7 @@ void i82801cx_enable_ioapic( struct device *dev) // Hang if the ID didn't take (chip not present?) *ioapic_index = 0; dword = *ioapic_data; - printk_debug("Southbridge apic id = %x\n", (dword>>24) & 0xF); + printk(BIOS_DEBUG, "Southbridge apic id = %x\n", (dword>>24) & 0xF); if(dword != (2<<24)) die(""); @@ -105,7 +105,7 @@ void i82801cx_rtc_init(struct device *dev) pmcon3 |= SLEEP_AFTER_POWER_FAIL; } pci_write_config8(dev, GEN_PMCON_3, pmcon3); - printk_info("set power %s after power fail\n", + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off"); // See if the Safe Mode jumper is set @@ -177,7 +177,7 @@ static void lpc_init(struct device *dev) else byte |= 1; // Return to S5 pci_write_config8(dev, GEN_PMCON_3, byte); - printk_info("set power %s after power fail\n", pwr_on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); /* Set up NMI on errors */ byte = inb(0x61); diff --git a/src/southbridge/intel/i82801cx/i82801cx_usb.c b/src/southbridge/intel/i82801cx/i82801cx_usb.c index 258581a78b..00b668d023 100644 --- a/src/southbridge/intel/i82801cx/i82801cx_usb.c +++ b/src/southbridge/intel/i82801cx/i82801cx_usb.c @@ -10,14 +10,14 @@ static void usb_init(struct device *dev) #if 0 uint32_t cmd; - printk_debug("USB: Setting up controller.. "); + printk(BIOS_DEBUG, "USB: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } diff --git a/src/southbridge/intel/i82801dx/i82801dx_ac97.c b/src/southbridge/intel/i82801dx/i82801dx_ac97.c index 10b100beee..ccfccd3421 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_ac97.c +++ b/src/southbridge/intel/i82801dx/i82801dx_ac97.c @@ -101,7 +101,7 @@ static int ac97_semaphore(void) timeout--; } while ((reg8 & 1) && timeout); if (! timeout) { - printk_debug("Timeout!\n"); + printk(BIOS_DEBUG, "Timeout!\n"); } return (!timeout); @@ -123,7 +123,7 @@ static void ac97_audio_init(struct device *dev) u32 reg32; int i; - printk_debug("Initializing AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Initializing AC'97 Audio.\n"); /* top 16 bits are zero, so don't read them */ nabmbar = pci_read_config16(dev, NABMBAR) & 0xfffe; @@ -142,7 +142,7 @@ static void ac97_audio_init(struct device *dev) reg32 = inl(nabmbar + GLOB_STA); if ((reg32 & ((1 << 28) | (1 << 9) | (1 << 8))) == 0) { /* Primary Codec not found */ - printk_debug("No primary codec. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "No primary codec. Disabling AC'97 Audio.\n"); return; } @@ -152,7 +152,7 @@ static void ac97_audio_init(struct device *dev) outw(0x8000, nambar + MASTER_VOL); ac97_semaphore(); if (inw(nambar + MASTER_VOL) != 0x8000) { - printk_debug("Codec not programmable. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Codec not programmable. Disabling AC'97 Audio.\n"); return; } diff --git a/src/southbridge/intel/i82801dx/i82801dx_ide.c b/src/southbridge/intel/i82801dx/i82801dx_ide.c index bf879a9c3c..75350da058 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_ide.c +++ b/src/southbridge/intel/i82801dx/i82801dx_ide.c @@ -40,9 +40,9 @@ static void ide_init(struct device *dev) if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0: Primary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { - printk_info("IDE0: Primary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -51,9 +51,9 @@ static void ide_init(struct device *dev) if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1: Secondary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { - printk_info("IDE1: Secondary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801dx/i82801dx_lpc.c b/src/southbridge/intel/i82801dx/i82801dx_lpc.c index a3130e164e..ae522c310b 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_lpc.c +++ b/src/southbridge/intel/i82801dx/i82801dx_lpc.c @@ -53,14 +53,14 @@ static void i82801dx_enable_ioapic(struct device *dev) reg32 |= (1 << 1); /* Delayed transaction enable */ reg32 |= (1 << 2); /* DMA collection buffer enable */ pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); *ioapic_index = 0; *ioapic_data = (1 << 25); *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", reg32); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); if (reg32 != (1 << 25)) die("APIC Error\n"); @@ -107,7 +107,7 @@ static void i82801dx_power_options(device_t dev) * 1 == S5 Soft Off */ pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); - printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ byte = inb(0x61); @@ -198,7 +198,7 @@ static void enable_hpet(struct device *dev) reg32 |= (code << 15); pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("Enabling HPET @0x%x\n", HPET_ADDR | (code << 12)); + printk(BIOS_DEBUG, "Enabling HPET @0x%x\n", HPET_ADDR | (code << 12)); } static void lpc_init(struct device *dev) diff --git a/src/southbridge/intel/i82801dx/i82801dx_smi.c b/src/southbridge/intel/i82801dx/i82801dx_smi.c index a536d8ba76..a1277b03a4 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_smi.c +++ b/src/southbridge/intel/i82801dx/i82801dx_smi.c @@ -63,16 +63,16 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_debug("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_debug("WAK "); - if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_debug("RTC "); - if (pm1_sts & (1 << 8)) printk_debug("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_debug("GBL "); - if (pm1_sts & (1 << 4)) printk_debug("BM "); - if (pm1_sts & (1 << 0)) printk_debug("TMROF "); - printk_debug("\n"); + printk(BIOS_DEBUG, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); + printk(BIOS_DEBUG, "\n"); } /** @@ -92,28 +92,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -135,25 +135,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -175,11 +175,11 @@ static u16 reset_alt_gp_smi_status(void) static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) { int i; - printk_debug("ALT_GP_SMI_STS: "); + printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); for (i=15; i<= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk_debug("GPI%d ", (i-16)); + if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } @@ -205,21 +205,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } @@ -243,14 +243,14 @@ static void smm_relocate(void) u32 smi_en; u16 pm1_en; - printk_debug("Initializing SMM handler..."); + printk(BIOS_DEBUG, "Initializing SMM handler..."); pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; - printk_spew(" ... pmbase = 0x%04x\n", pmbase); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); smi_en = inl(pmbase + SMI_EN); if (smi_en & APMC_EN) { - printk_info("SMI# handler already enabled?\n"); + printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; } @@ -258,7 +258,7 @@ static void smm_relocate(void) memcpy((void *)0x38000, &smm_relocation_start, &smm_relocation_end - &smm_relocation_start); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); dump_smi_status(reset_smi_status()); dump_pm1_status(reset_pm1_status()); dump_gpe0_status(reset_gpe0_status()); @@ -314,7 +314,7 @@ static void smm_relocate(void) */ /* raise an SMI interrupt */ - printk_spew(" ... raise SMI#\n"); + printk(BIOS_SPEW, " ... raise SMI#\n"); outb(0x00, 0xb2); } @@ -349,7 +349,7 @@ void smm_lock(void) * After running this function, only a full reset can * make the SMM registers writable again. */ - printk_debug("Locking SMM.\n"); + printk(BIOS_DEBUG, "Locking SMM.\n"); pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, D_LCK | G_SMRAME | C_BASE_SEG); } diff --git a/src/southbridge/intel/i82801dx/i82801dx_smihandler.c b/src/southbridge/intel/i82801dx/i82801dx_smihandler.c index eda2691ecf..107cf80aea 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_smihandler.c +++ b/src/southbridge/intel/i82801dx/i82801dx_smihandler.c @@ -83,18 +83,18 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_spew("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_spew("WAK "); - if (pm1_sts & (1 << 14)) printk_spew("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_spew("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_spew("RTC "); - if (pm1_sts & (1 << 8)) printk_spew("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_spew("GBL "); - if (pm1_sts & (1 << 4)) printk_spew("BM "); - if (pm1_sts & (1 << 0)) printk_spew("TMROF "); - printk_spew("\n"); + printk(BIOS_SPEW, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); + printk(BIOS_SPEW, "\n"); int reg16 = inw(pmbase + PM1_EN); - printk_spew("PM1_EN: %x\n", reg16); + printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); } /** @@ -114,28 +114,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -157,25 +157,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -200,21 +200,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } /* We are using PCIe accesses for now @@ -227,7 +227,7 @@ int southbridge_io_trap_handler(int smif) { switch (smif) { case 0x32: - printk_debug("OS Init\n"); + printk(BIOS_DEBUG, "OS Init\n"); /* gnvs->smif: * On success, the IO Trap Handler returns 0 * On failure, the IO Trap Handler returns a value != 0 @@ -306,23 +306,23 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* Figure out SLP_TYP */ reg32 = inl(pmbase + PM1_CNT); - printk_spew("SMI#: SLP = 0x%08x\n", reg32); + printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); slp_typ = (reg32 >> 10) & 7; /* Next, do the deed. */ switch (slp_typ) { - case 0: printk_debug("SMI#: Entering S0 (On)\n"); break; - case 1: printk_debug("SMI#: Entering S1 (Assert STPCLK#)\n"); break; + case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; + case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; case 5: - printk_debug("SMI#: Entering S3 (Suspend-To-RAM)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); /* Invalidate the cache before going to S3 */ wbinvd(); break; - case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break; + case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; case 7: - printk_debug("SMI#: Entering S5 (Soft Power off)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); outl(0, pmbase + GPE0_EN); @@ -340,7 +340,7 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0); break; - default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break; + default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; } /* Write back to the SLP register to cause the originally intended @@ -375,51 +375,51 @@ static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("C-state control\n"); + printk(BIOS_DEBUG, "C-state control\n"); break; case PST_CONTROL: /* Calling this function seems to cause * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("P-state control\n"); + printk(BIOS_DEBUG, "P-state control\n"); break; case ACPI_DISABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl &= ~SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI disabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); break; case ACPI_ENABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl |= SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI enabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); break; case GNVS_UPDATE: if (smm_initialized) { - printk_debug("SMI#: SMM structures already initialized!\n"); + printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); return; } gnvs = *(global_nvs_t **)0x500; tcg = *(void **)0x504; smi1 = *(void **)0x508; smm_initialized = 1; - printk_debug("SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); + printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); break; case MBI_UPDATE: // FIXME if (mbi_initialized) { - printk_debug("SMI#: mbi already registered!\n"); + printk(BIOS_DEBUG, "SMI#: mbi already registered!\n"); return; } mbi = *(void **)0x500; mbi_len = *(u32 *)0x504; mbi_initialized = 1; - printk_debug("SMI#: Registered MBI at %p (%d bytes)\n", mbi, mbi_len); + printk(BIOS_DEBUG, "SMI#: Registered MBI at %p (%d bytes)\n", mbi, mbi_len); break; default: - printk_debug("SMI#: Unknown function APM_CNT=%02x\n", reg8); + printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8); } } @@ -463,7 +463,7 @@ static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_ mainboard_smi_gpi(reg16); } else { if (reg16) - printk_debug("GPI (mask %04x)\n",reg16); + printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); } } @@ -477,7 +477,7 @@ static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_s if ((reg32 & MCSMI_EN) == 0) return; - printk_debug("Microcontroller SMI.\n"); + printk(BIOS_DEBUG, "Microcontroller SMI.\n"); } @@ -508,12 +508,12 @@ static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_ * resolute answer would be to power down the * box. */ - printk_debug("Switching back to RO\n"); + printk(BIOS_DEBUG, "Switching back to RO\n"); pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); } /* No else for now? */ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ /* Handle TCO timeout */ - printk_debug("TCO Timeout.\n"); + printk(BIOS_DEBUG, "TCO Timeout.\n"); } else if (!tco_sts) { dump_tco_status(tco_sts); } @@ -529,7 +529,7 @@ static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *s if ((reg32 & PERIODIC_EN) == 0) return; - printk_debug("Periodic SMI.\n"); + printk(BIOS_DEBUG, "Periodic SMI.\n"); } static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save) @@ -563,7 +563,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st /* IOTRAP(0) SMIC */ if (IOTRAP(0)) { if (!(trap_cycle & (1 << 24))) { // It's a write - printk_debug("SMI1 command\n"); + printk(BIOS_DEBUG, "SMI1 command\n"); data = RCBA32(0x1e18); data &= mask; // if (smi1) @@ -573,16 +573,16 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st // Fall through to debug } - printk_debug(" trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk_debug(" TRAP = %d\n", i); - printk_debug(" AHBE = %x\n", (trap_cycle >> 16) & 0xf); - printk_debug(" MASK = 0x%08x\n", mask); - printk_debug(" read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); + printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); + printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ data = RCBA32(0x1e18); - printk_debug(" iotrap written data = 0x%08x\n", data); + printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); } #endif #undef IOTRAP @@ -655,7 +655,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav if (southbridge_smi[i]) southbridge_smi[i](node, state_save); else { - printk_debug("SMI_STS[%d] occured, but no " + printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " "handler available.\n", i); dump = 1; } diff --git a/src/southbridge/intel/i82801dx/i82801dx_usb.c b/src/southbridge/intel/i82801dx/i82801dx_usb.c index 48b990d1ac..be44a293dc 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_usb.c +++ b/src/southbridge/intel/i82801dx/i82801dx_usb.c @@ -29,12 +29,12 @@ static void usb_init(struct device *dev) { u32 cmd; - printk_debug("USB: Setting up controller.. "); + printk(BIOS_DEBUG, "USB: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static struct device_operations usb_ops = { diff --git a/src/southbridge/intel/i82801dx/i82801dx_usb2.c b/src/southbridge/intel/i82801dx/i82801dx_usb2.c index 96bbd7748d..a0ea5f64e1 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_usb2.c +++ b/src/southbridge/intel/i82801dx/i82801dx_usb2.c @@ -29,12 +29,12 @@ static void usb2_init(struct device *dev) { u32 cmd; - printk_debug("USB: Setting up controller.. "); + printk(BIOS_DEBUG, "USB: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static struct device_operations usb2_ops = { diff --git a/src/southbridge/intel/i82801ex/i82801ex_ehci.c b/src/southbridge/intel/i82801ex/i82801ex_ehci.c index 60b1f304c2..17da5d94c6 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_ehci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ehci.c @@ -9,12 +9,12 @@ static void ehci_init(struct device *dev) { uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801ex/i82801ex_ide.c b/src/southbridge/intel/i82801ex/i82801ex_ide.c index b4d2311e0b..cd622907ab 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_ide.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ide.c @@ -13,7 +13,7 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x48, 0x05); pci_write_config16(dev, 0x4a, 0x0101); pci_write_config16(dev, 0x54, 0x5055); - printk_debug("IDE Enabled\n"); + printk(BIOS_DEBUG, "IDE Enabled\n"); } static void i82801ex_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801ex/i82801ex_lpc.c b/src/southbridge/intel/i82801ex/i82801ex_lpc.c index b9d19074a4..b97af3860a 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_lpc.c +++ b/src/southbridge/intel/i82801ex/i82801ex_lpc.c @@ -233,7 +233,7 @@ static void enable_hpet(struct device *dev) dword |= (code<<15); pci_write_config32(dev, GEN_CNTL, dword); - printk_debug("enabling HPET @0x%lx\n", hpet_address | (code <<12) ); + printk(BIOS_DEBUG, "enabling HPET @0x%lx\n", hpet_address | (code <<12) ); } static void lpc_init(struct device *dev) @@ -267,7 +267,7 @@ static void lpc_init(struct device *dev) byte |= 1; } pci_write_config8(dev, 0xa4, byte); - printk_info("set power %s after power fail\n", pwr_on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); /* Set up the PIRQ */ i82801ex_pirq_init(dev); diff --git a/src/southbridge/intel/i82801ex/i82801ex_sata.c b/src/southbridge/intel/i82801ex/i82801ex_sata.c index 73f5773fd5..a490f2a8c3 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_sata.c +++ b/src/southbridge/intel/i82801ex/i82801ex_sata.c @@ -7,7 +7,7 @@ static void sata_init(struct device *dev) { - printk_debug("SATA init\n"); + printk(BIOS_DEBUG, "SATA init\n"); /* SATA configuration */ pci_write_config8(dev, 0x04, 0x07); pci_write_config8(dev, 0x09, 0x8f); diff --git a/src/southbridge/intel/i82801ex/i82801ex_uhci.c b/src/southbridge/intel/i82801ex/i82801ex_uhci.c index 177b82089c..fe80079d09 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_uhci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_uhci.c @@ -10,13 +10,13 @@ static void uhci_init(struct device *dev) uint32_t cmd; #if 1 - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } diff --git a/src/southbridge/intel/i82801ex/i82801ex_watchdog.c b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c index 44a701823a..205ea87d94 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_watchdog.c +++ b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c @@ -24,6 +24,6 @@ void watchdog_off(void) /* Clear TCO timeout status */ outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("Watchdog ICH5 disabled\r\n"); + printk(BIOS_DEBUG, "Watchdog ICH5 disabled\r\n"); } diff --git a/src/southbridge/intel/i82801gx/i82801gx_ac97.c b/src/southbridge/intel/i82801gx/i82801gx_ac97.c index f1e410715b..602014bb2e 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_ac97.c +++ b/src/southbridge/intel/i82801gx/i82801gx_ac97.c @@ -101,7 +101,7 @@ static int ac97_semaphore(void) timeout--; } while ((reg8 & 1) && timeout); if (! timeout) { - printk_debug("Timeout!\n"); + printk(BIOS_DEBUG, "Timeout!\n"); } return (!timeout); @@ -123,7 +123,7 @@ static void ac97_audio_init(struct device *dev) u32 reg32; int i; - printk_debug("Initializing AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Initializing AC'97 Audio.\n"); /* top 16 bits are zero, so don't read them */ nabmbar = pci_read_config16(dev, NABMBAR) & 0xfffe; @@ -142,7 +142,7 @@ static void ac97_audio_init(struct device *dev) reg32 = inl(nabmbar + GLOB_STA); if ((reg32 & ((1 << 28) | (1 << 9) | (1 << 8))) == 0) { /* Primary Codec not found */ - printk_debug("No primary codec. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "No primary codec. Disabling AC'97 Audio.\n"); return; } @@ -152,7 +152,7 @@ static void ac97_audio_init(struct device *dev) outw(0x8000, nambar + MASTER_VOL); ac97_semaphore(); if (inw(nambar + MASTER_VOL) != 0x8000) { - printk_debug("Codec not programmable. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Codec not programmable. Disabling AC'97 Audio.\n"); return; } diff --git a/src/southbridge/intel/i82801gx/i82801gx_azalia.c b/src/southbridge/intel/i82801gx/i82801gx_azalia.c index 60b7334c2c..a4cf14c4f9 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_azalia.c +++ b/src/southbridge/intel/i82801gx/i82801gx_azalia.c @@ -86,7 +86,7 @@ no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ set_bits(base + 0x08, 1, 0); - printk_debug("Azalia: No codec!\n"); + printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } @@ -170,7 +170,7 @@ static void codec_init(struct device *dev, u32 base, int addr) u32 verb_size; int i; - printk_debug("Azalia: Initializing codec #%d\n", addr); + printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); /* 1 */ if (wait_for_ready(base) == -1) @@ -185,14 +185,14 @@ static void codec_init(struct device *dev, u32 base, int addr) reg32 = read32(base + 0x64); /* 2 */ - printk_debug("Azalia: codec viddid: %08x\n", reg32); + printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); verb_size = find_verb(dev, reg32, &verb); if (!verb_size) { - printk_debug("Azalia: No verb!\n"); + printk(BIOS_DEBUG, "Azalia: No verb!\n"); return; } - printk_debug("Azalia: verb_size: %d\n", verb_size); + printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); /* 3 */ for (i = 0; i < verb_size; i++) { @@ -204,7 +204,7 @@ static void codec_init(struct device *dev, u32 base, int addr) if (wait_for_valid(base) == -1) return; } - printk_debug("Azalia: verb loaded.\n"); + printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); } static void codecs_init(struct device *dev, u32 base, u32 codec_mask) @@ -275,7 +275,7 @@ static void azalia_init(struct device *dev) pci_write_config8(dev, 0x40, reg8); mdelay(1); reg8 = pci_read_config8(dev, 0x40); - printk_debug("Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97"); + printk(BIOS_DEBUG, "Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97"); // reg8 = pci_read_config8(dev, 0x40); // Audio Control @@ -304,11 +304,11 @@ static void azalia_init(struct device *dev) // NOTE this will break as soon as the Azalia get's a bar above // 4G. Is there anything we can do about it? base = (u32)res->base; - printk_debug("Azalia: base = %08x\n", (u32)base); + printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base); codec_mask = codec_detect(base); if (codec_mask) { - printk_debug("Azalia: codec_mask = %02x\n", codec_mask); + printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); codecs_init(dev, base, codec_mask); } } diff --git a/src/southbridge/intel/i82801gx/i82801gx_ide.c b/src/southbridge/intel/i82801gx/i82801gx_ide.c index 28a1c055ea..84b50d6535 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_ide.c +++ b/src/southbridge/intel/i82801gx/i82801gx_ide.c @@ -35,9 +35,9 @@ static void ide_init(struct device *dev) /* Get the chip configuration */ config_t *config = dev->chip_info; - printk_debug("i82801gx_ide: initializing... "); + printk(BIOS_DEBUG, "i82801gx_ide: initializing... "); if (config == NULL) { - printk_err("\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n"); + printk(BIOS_ERR, "\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n"); // Trying to set somewhat safe defaults instead of bailing out. enable_primary = enable_secondary = 1; } else { @@ -61,7 +61,7 @@ static void ide_init(struct device *dev) ideTimingConfig |= (3 << 8); // RCT = 1 clock ideTimingConfig |= (1 << 1); // IE0 ideTimingConfig |= (1 << 0); // TIME0 - printk_debug("IDE0 "); + printk(BIOS_DEBUG, "IDE0 "); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -75,7 +75,7 @@ static void ide_init(struct device *dev) ideTimingConfig |= (3 << 8); // RCT = 1 clock ideTimingConfig |= (1 << 1); // IE0 ideTimingConfig |= (1 << 0); // TIME0 - printk_debug("IDE1 "); + printk(BIOS_DEBUG, "IDE1 "); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); @@ -92,7 +92,7 @@ static void ide_init(struct device *dev) /* Interrupt Pin is set by D31IP.PIP */ pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */ - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801gx/i82801gx_lpc.c b/src/southbridge/intel/i82801gx/i82801gx_lpc.c index ccab5482c9..f0e48ec29e 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_lpc.c +++ b/src/southbridge/intel/i82801gx/i82801gx_lpc.c @@ -52,16 +52,16 @@ static void i82801gx_enable_apic(struct device *dev) *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); if (reg32 != (1 << 25)) die("APIC Error\n"); - printk_spew("Dumping IOAPIC registers\n"); + printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; - printk_spew(" reg 0x%04x:", i); + printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; - printk_spew(" 0x%08x\n", reg32); + printk(BIOS_SPEW, " 0x%08x\n", reg32); } *ioapic_index = 3; /* Select Boot Configuration register. */ @@ -213,7 +213,7 @@ static void i82801gx_power_options(device_t dev) reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */ pci_write_config8(dev, GEN_PMCON_3, reg8); - printk_info("Set power %s after power failure.\n", state); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); /* Set up NMI on errors. */ reg8 = inb(0x61); @@ -227,10 +227,10 @@ static void i82801gx_power_options(device_t dev) nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if (nmi_option) { - printk_info ("NMI sources enabled.\n"); + printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); /* Set NMI. */ } else { - printk_info ("NMI sources disabled.\n"); + printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ } outb(reg8, 0x70); @@ -296,7 +296,7 @@ static void i82801gx_rtc_init(struct device *dev) reg8 &= ~RTC_BATTERY_DEAD; pci_write_config8(dev, GEN_PMCON_3, reg8); } - printk_debug("rtc_failed = 0x%x\n", rtc_failed); + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); rtc_init(rtc_failed); } @@ -340,13 +340,13 @@ static void i82801gx_lock_smm(struct device *dev) #endif #if ENABLE_ACPI_MODE_IN_COREBOOT - printk_debug("Enabling ACPI via APMC:\n"); + printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); outb(0xe1, 0xb2); // Enable ACPI mode - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #else - printk_debug("Disabling ACPI via APMC:\n"); + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); outb(0x1e, 0xb2); // Disable ACPI mode - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif /* Don't allow evil boot loaders, kernels, or * userspace applications to deceive us: @@ -355,29 +355,29 @@ static void i82801gx_lock_smm(struct device *dev) #if TEST_SMM_FLASH_LOCKDOWN /* Now try this: */ - printk_debug("Locking BIOS to RO... "); + printk(BIOS_DEBUG, "Locking BIOS to RO... "); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); reg8 &= ~(1 << 0); /* clear BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 |= (1 << 1); /* set BLE */ pci_write_config8(dev, 0xdc, reg8); - printk_debug("ok.\n"); + printk(BIOS_DEBUG, "ok.\n"); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); - printk_debug("Writing:\n"); + printk(BIOS_DEBUG, "Writing:\n"); *(volatile u8 *)0xfff00000 = 0x00; - printk_debug("Testing:\n"); + printk(BIOS_DEBUG, "Testing:\n"); reg8 |= (1 << 0); /* set BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); - printk_debug("Done.\n"); + printk(BIOS_DEBUG, "Done.\n"); #endif } #endif @@ -406,7 +406,7 @@ static void i82801gx_fixups(struct device *dev) static void lpc_init(struct device *dev) { - printk_debug("i82801gx: lpc_init\n"); + printk(BIOS_DEBUG, "i82801gx: lpc_init\n"); /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); diff --git a/src/southbridge/intel/i82801gx/i82801gx_pci.c b/src/southbridge/intel/i82801gx/i82801gx_pci.c index d9057cb295..c4c22f0ae8 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_pci.c +++ b/src/southbridge/intel/i82801gx/i82801gx_pci.c @@ -71,7 +71,7 @@ static void ich_pci_dev_enable_resources(struct device *dev) /* Set the subsystem vendor and device id for mainboard devices */ ops = ops_pci(dev); if (dev->on_mainboard && ops && ops->set_subsystem) { - printk_debug("%s subsystem <- %02x/%02x\n", + printk(BIOS_DEBUG, "%s subsystem <- %02x/%02x\n", dev_path(dev), CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID, CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID); @@ -87,10 +87,10 @@ static void ich_pci_dev_enable_resources(struct device *dev) * this will cause the ROM and APICs not being visible * anymore. */ - printk_debug("%s cmd <- %02x\n", dev_path(dev), command); + printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command); pci_write_config16(dev, PCI_COMMAND, command); #else - printk_debug("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command); + printk(BIOS_DEBUG, "%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command); #endif } @@ -105,7 +105,7 @@ static void ich_pci_bus_enable_resources(struct device *dev) ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); ctrl |= dev->link[0].bridge_ctrl; ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* error check */ - printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); + printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); /* This is the reason we need our own pci_bus_enable_resources */ diff --git a/src/southbridge/intel/i82801gx/i82801gx_pcie.c b/src/southbridge/intel/i82801gx/i82801gx_pcie.c index b66a887063..d69bc6d07d 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_pcie.c +++ b/src/southbridge/intel/i82801gx/i82801gx_pcie.c @@ -28,7 +28,7 @@ static void pci_init(struct device *dev) u16 reg16; u32 reg32; - printk_debug("Initializing ICH7 PCIe bridge.\n"); + printk(BIOS_DEBUG, "Initializing ICH7 PCIe bridge.\n"); /* Enable Bus Master */ reg32 = pci_read_config32(dev, PCI_COMMAND); @@ -77,13 +77,13 @@ static void pci_init(struct device *dev) #ifdef EVEN_MORE_DEBUG reg32 = pci_read_config32(dev, 0x20); - printk_spew(" MBL = 0x%08x\n", reg32); + printk(BIOS_SPEW, " MBL = 0x%08x\n", reg32); reg32 = pci_read_config32(dev, 0x24); - printk_spew(" PMBL = 0x%08x\n", reg32); + printk(BIOS_SPEW, " PMBL = 0x%08x\n", reg32); reg32 = pci_read_config32(dev, 0x28); - printk_spew(" PMBU32 = 0x%08x\n", reg32); + printk(BIOS_SPEW, " PMBU32 = 0x%08x\n", reg32); reg32 = pci_read_config32(dev, 0x2c); - printk_spew(" PMLU32 = 0x%08x\n", reg32); + printk(BIOS_SPEW, " PMLU32 = 0x%08x\n", reg32); #endif /* Clear errors in status registers */ diff --git a/src/southbridge/intel/i82801gx/i82801gx_sata.c b/src/southbridge/intel/i82801gx/i82801gx_sata.c index ec477e1696..50cdb48131 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_sata.c +++ b/src/southbridge/intel/i82801gx/i82801gx_sata.c @@ -33,10 +33,10 @@ static void sata_init(struct device *dev) /* Get the chip configuration */ config_t *config = dev->chip_info; - printk_debug("i82801gx_sata: initializing...\n"); + printk(BIOS_DEBUG, "i82801gx_sata: initializing...\n"); if (config == NULL) { - printk_err("i82801gx_sata: error: device not in Config.lb!\n"); + printk(BIOS_ERR, "i82801gx_sata: error: device not in Config.lb!\n"); return; } @@ -46,7 +46,7 @@ static void sata_init(struct device *dev) pci_write_config16(dev, PCI_COMMAND, 0x0007); if (config->ide_legacy_combined) { - printk_debug("SATA controller in combined mode.\n"); + printk(BIOS_DEBUG, "SATA controller in combined mode.\n"); /* No AHCI: clear AHCI base */ pci_write_config32(dev, 0x24, 0x00000000); /* And without AHCI BAR no memory decoding */ @@ -80,7 +80,7 @@ static void sata_init(struct device *dev) /* SATA Initialization register */ pci_write_config32(dev, 0x94, 0x5a000180); } else if(config->sata_ahci) { - printk_debug("SATA controller in AHCI mode.\n"); + printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n"); /* Allow both Legacy and Native mode */ pci_write_config8(dev, 0x09, 0x8f); @@ -112,7 +112,7 @@ static void sata_init(struct device *dev) /* SATA Initialization register */ pci_write_config32(dev, 0x94, 0x1a000180); } else { - printk_debug("SATA controller in plain mode.\n"); + printk(BIOS_DEBUG, "SATA controller in plain mode.\n"); /* Set Sata Controller Mode. No Mapping(?) */ pci_write_config8(dev, 0x90, 0x00); diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_smbus.c index 4306055d37..50c6d0f342 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_smbus.c +++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.c @@ -35,11 +35,11 @@ static void smbus_init(struct device *dev) u32 smb_base; smb_base = pci_read_config32(dev, SMB_BASE); - printk_debug("Initializing SMBus device:\n"); - printk_debug(" Old SMBUS Base Address: 0x%04x\n", smb_base); + printk(BIOS_DEBUG, "Initializing SMBus device:\n"); + printk(BIOS_DEBUG, " Old SMBUS Base Address: 0x%04x\n", smb_base); pci_write_config32(dev, SMB_BASE, 0x00000401); smb_base = pci_read_config32(dev, SMB_BASE); - printk_debug(" New SMBUS Base Address: 0x%04x\n", smb_base); + printk(BIOS_DEBUG, " New SMBUS Base Address: 0x%04x\n", smb_base); } static int lsmbus_read_byte(device_t dev, u8 address) diff --git a/src/southbridge/intel/i82801gx/i82801gx_smi.c b/src/southbridge/intel/i82801gx/i82801gx_smi.c index 0c70812412..3ba21b0dd1 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_smi.c +++ b/src/southbridge/intel/i82801gx/i82801gx_smi.c @@ -63,16 +63,16 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_debug("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_debug("WAK "); - if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_debug("RTC "); - if (pm1_sts & (1 << 8)) printk_debug("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_debug("GBL "); - if (pm1_sts & (1 << 4)) printk_debug("BM "); - if (pm1_sts & (1 << 0)) printk_debug("TMROF "); - printk_debug("\n"); + printk(BIOS_DEBUG, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); + printk(BIOS_DEBUG, "\n"); } /** @@ -92,28 +92,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -135,25 +135,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -175,11 +175,11 @@ static u16 reset_alt_gp_smi_status(void) static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) { int i; - printk_debug("ALT_GP_SMI_STS: "); + printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); for (i=15; i<= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk_debug("GPI%d ", (i-16)); + if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } @@ -205,21 +205,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } @@ -243,14 +243,14 @@ static void smm_relocate(void) u32 smi_en; u16 pm1_en; - printk_debug("Initializing SMM handler..."); + printk(BIOS_DEBUG, "Initializing SMM handler..."); pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; - printk_spew(" ... pmbase = 0x%04x\n", pmbase); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); smi_en = inl(pmbase + SMI_EN); if (smi_en & APMC_EN) { - printk_info("SMI# handler already enabled?\n"); + printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; } @@ -258,7 +258,7 @@ static void smm_relocate(void) memcpy((void *)0x38000, &smm_relocation_start, &smm_relocation_end - &smm_relocation_start); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); dump_smi_status(reset_smi_status()); dump_pm1_status(reset_pm1_status()); dump_gpe0_status(reset_gpe0_status()); @@ -314,7 +314,7 @@ static void smm_relocate(void) */ /* raise an SMI interrupt */ - printk_spew(" ... raise SMI#\n"); + printk(BIOS_SPEW, " ... raise SMI#\n"); outb(0x00, 0xb2); } @@ -349,7 +349,7 @@ void smm_lock(void) * After running this function, only a full reset can * make the SMM registers writable again. */ - printk_debug("Locking SMM.\n"); + printk(BIOS_DEBUG, "Locking SMM.\n"); pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, D_LCK | G_SMRAME | C_BASE_SEG); } diff --git a/src/southbridge/intel/i82801gx/i82801gx_smihandler.c b/src/southbridge/intel/i82801gx/i82801gx_smihandler.c index 9cd0370cdc..b478dbaa90 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_smihandler.c +++ b/src/southbridge/intel/i82801gx/i82801gx_smihandler.c @@ -76,18 +76,18 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_spew("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_spew("WAK "); - if (pm1_sts & (1 << 14)) printk_spew("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_spew("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_spew("RTC "); - if (pm1_sts & (1 << 8)) printk_spew("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_spew("GBL "); - if (pm1_sts & (1 << 4)) printk_spew("BM "); - if (pm1_sts & (1 << 0)) printk_spew("TMROF "); - printk_spew("\n"); + printk(BIOS_SPEW, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); + printk(BIOS_SPEW, "\n"); int reg16 = inw(pmbase + PM1_EN); - printk_spew("PM1_EN: %x\n", reg16); + printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); } /** @@ -107,28 +107,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -150,25 +150,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -193,21 +193,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } /* We are using PCIe accesses for now @@ -220,7 +220,7 @@ int southbridge_io_trap_handler(int smif) { switch (smif) { case 0x32: - printk_debug("OS Init\n"); + printk(BIOS_DEBUG, "OS Init\n"); /* gnvs->smif: * On success, the IO Trap Handler returns 0 * On failure, the IO Trap Handler returns a value != 0 @@ -299,23 +299,23 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* Figure out SLP_TYP */ reg32 = inl(pmbase + PM1_CNT); - printk_spew("SMI#: SLP = 0x%08x\n", reg32); + printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); slp_typ = (reg32 >> 10) & 7; /* Next, do the deed. */ switch (slp_typ) { - case 0: printk_debug("SMI#: Entering S0 (On)\n"); break; - case 1: printk_debug("SMI#: Entering S1 (Assert STPCLK#)\n"); break; + case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; + case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; case 5: - printk_debug("SMI#: Entering S3 (Suspend-To-RAM)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); /* Invalidate the cache before going to S3 */ wbinvd(); break; - case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break; + case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; case 7: - printk_debug("SMI#: Entering S5 (Soft Power off)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); outl(0, pmbase + GPE0_EN); @@ -333,7 +333,7 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0); break; - default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break; + default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; } /* Write back to the SLP register to cause the originally intended @@ -368,40 +368,40 @@ static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("C-state control\n"); + printk(BIOS_DEBUG, "C-state control\n"); break; case PST_CONTROL: /* Calling this function seems to cause * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("P-state control\n"); + printk(BIOS_DEBUG, "P-state control\n"); break; case ACPI_DISABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl &= ~SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI disabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); break; case ACPI_ENABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl |= SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI enabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); break; case GNVS_UPDATE: if (smm_initialized) { - printk_debug("SMI#: SMM structures already initialized!\n"); + printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); return; } gnvs = *(global_nvs_t **)0x500; tcg = *(void **)0x504; smi1 = *(void **)0x508; smm_initialized = 1; - printk_debug("SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); + printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); break; default: - printk_debug("SMI#: Unknown function APM_CNT=%02x\n", reg8); + printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8); } } @@ -445,7 +445,7 @@ static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_ mainboard_smi_gpi(reg16); } else { if (reg16) - printk_debug("GPI (mask %04x)\n",reg16); + printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); } } @@ -459,7 +459,7 @@ static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_s if ((reg32 & MCSMI_EN) == 0) return; - printk_debug("Microcontroller SMI.\n"); + printk(BIOS_DEBUG, "Microcontroller SMI.\n"); } @@ -490,12 +490,12 @@ static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_ * resolute answer would be to power down the * box. */ - printk_debug("Switching back to RO\n"); + printk(BIOS_DEBUG, "Switching back to RO\n"); pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); } /* No else for now? */ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ /* Handle TCO timeout */ - printk_debug("TCO Timeout.\n"); + printk(BIOS_DEBUG, "TCO Timeout.\n"); } else if (!tco_sts) { dump_tco_status(tco_sts); } @@ -511,7 +511,7 @@ static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *s if ((reg32 & PERIODIC_EN) == 0) return; - printk_debug("Periodic SMI.\n"); + printk(BIOS_DEBUG, "Periodic SMI.\n"); } static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save) @@ -544,7 +544,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st /* IOTRAP(0) SMIC */ if (IOTRAP(0)) { if (!(trap_cycle & (1 << 24))) { // It's a write - printk_debug("SMI1 command\n"); + printk(BIOS_DEBUG, "SMI1 command\n"); data = RCBA32(0x1e18); data &= mask; // if (smi1) @@ -554,16 +554,16 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st // Fall through to debug } - printk_debug(" trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk_debug(" TRAP = %d\n", i); - printk_debug(" AHBE = %x\n", (trap_cycle >> 16) & 0xf); - printk_debug(" MASK = 0x%08x\n", mask); - printk_debug(" read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); + printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); + printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ data = RCBA32(0x1e18); - printk_debug(" iotrap written data = 0x%08x\n", data); + printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); } #undef IOTRAP } @@ -635,7 +635,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav if (southbridge_smi[i]) southbridge_smi[i](node, state_save); else { - printk_debug("SMI_STS[%d] occured, but no " + printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " "handler available.\n", i); dump = 1; } diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb.c b/src/southbridge/intel/i82801gx/i82801gx_usb.c index 2803f9cdef..00fddf7c65 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb.c @@ -30,7 +30,7 @@ static void usb_init(struct device *dev) u8 reg8; /* USB Specification says the device must be Bus Master */ - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); reg32 = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); @@ -43,7 +43,7 @@ static void usb_init(struct device *dev) reg8 |= (1 << 0); pci_write_config8(dev, 0xca, reg8); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c index 829ae6b819..ead7bdca7f 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c @@ -30,7 +30,7 @@ void set_debug_port(unsigned port) { u32 dbgctl; - printk_debug("Enabling OWNER_CNT\n"); + printk(BIOS_DEBUG, "Enabling OWNER_CNT\n"); dbgctl = read32(EHCI_BAR + EHCI_DEBUG_OFFSET); dbgctl |= (1 << 30); write32(EHCI_BAR + EHCI_DEBUG_OFFSET, dbgctl); diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c index 3d61cae9b6..1bc5fcaecb 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c @@ -35,7 +35,7 @@ static void usb_ehci_init(struct device *dev) u32 reg32; u8 reg8; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); reg32 = pci_read_config32(dev, PCI_COMMAND); reg32 |= PCI_COMMAND_MASTER; reg32 |= PCI_COMMAND_SERR; @@ -61,7 +61,7 @@ static void usb_ehci_init(struct device *dev) reg8 |= (1 << 4); pci_write_config8(dev, 0x84, reg8); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c index 38350d7ef2..436a9227cd 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c +++ b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c @@ -49,5 +49,5 @@ void watchdog_off(void) outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("ICH7 watchdog disabled\r\n"); + printk(BIOS_DEBUG, "ICH7 watchdog disabled\r\n"); } diff --git a/src/southbridge/intel/i82870/p64h2_ioapic.c b/src/southbridge/intel/i82870/p64h2_ioapic.c index 0fa74ffcf3..d90fede890 100644 --- a/src/southbridge/intel/i82870/p64h2_ioapic.c +++ b/src/southbridge/intel/i82870/p64h2_ioapic.c @@ -62,7 +62,7 @@ static void p64h2_ioapic_init(device_t dev) pIndexRegister = (volatile uint32_t*) memoryBase; pWindowRegister = (volatile uint32_t*)(memoryBase + 0x10); - printk_debug("IOAPIC %d at %02x:%02x.%01x MBAR = %x DataAddr = %x\n", + printk(BIOS_DEBUG, "IOAPIC %d at %02x:%02x.%01x MBAR = %x DataAddr = %x\n", apic_id, dev->bus->secondary, PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn), pIndexRegister, pWindowRegister); diff --git a/src/southbridge/intel/pxhd/pxhd_bridge.c b/src/southbridge/intel/pxhd/pxhd_bridge.c index 0766b22e7b..0a50e5a994 100644 --- a/src/southbridge/intel/pxhd/pxhd_bridge.c +++ b/src/southbridge/intel/pxhd/pxhd_bridge.c @@ -22,7 +22,7 @@ static void pxhd_enable(device_t dev) } bridge = dev_find_slot(dev->bus->secondary, dev->path.pci.devfn & ~1); if (!bridge) { - printk_err("Cannot find bridge for ioapic: %s\n", + printk(BIOS_ERR, "Cannot find bridge for ioapic: %s\n", dev_path(dev)); return; } @@ -48,7 +48,7 @@ static unsigned int pxhd_scan_bridge(device_t dev, unsigned int max) if(bus_100Mhz) { uint16_t word; - printk_debug("setting pxhd bus to 100 Mhz\n"); + printk(BIOS_DEBUG, "setting pxhd bus to 100 Mhz\n"); /* set to pcix 100 mhz */ word = pci_read_config16(dev, 0x40); word &= ~(3 << 14); diff --git a/src/southbridge/nvidia/ck804/ck804_fadt.c b/src/southbridge/nvidia/ck804/ck804_fadt.c index 1bfc22d915..205f1f0550 100644 --- a/src/southbridge/nvidia/ck804/ck804_fadt.c +++ b/src/southbridge/nvidia/ck804/ck804_fadt.c @@ -13,7 +13,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) { acpi_header_t *header = &(fadt->header); - printk_debug("pm_base: 0x%04x\n", pm_base); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); /* Prepare the header */ memset((void *)fadt, 0, sizeof(acpi_fadt_t)); diff --git a/src/southbridge/nvidia/ck804/ck804_ide.c b/src/southbridge/nvidia/ck804/ck804_ide.c index df4659c228..f46a057ef7 100644 --- a/src/southbridge/nvidia/ck804/ck804_ide.c +++ b/src/southbridge/nvidia/ck804/ck804_ide.c @@ -25,12 +25,12 @@ static void ide_init(struct device *dev) if (conf->ide1_enable) { /* Enable secondary IDE interface. */ word |= (1 << 0); - printk_debug("IDE1 \t"); + printk(BIOS_DEBUG, "IDE1 \t"); } if (conf->ide0_enable) { /* Enable primary IDE interface. */ word |= (1 << 1); - printk_debug("IDE0\n"); + printk(BIOS_DEBUG, "IDE0\n"); } word |= (1 << 12); diff --git a/src/southbridge/nvidia/ck804/ck804_lpc.c b/src/southbridge/nvidia/ck804/ck804_lpc.c index 2b840fcbdd..d68a5b1077 100644 --- a/src/southbridge/nvidia/ck804/ck804_lpc.c +++ b/src/southbridge/nvidia/ck804/ck804_lpc.c @@ -95,7 +95,7 @@ static void enable_hpet(struct device *dev) pci_write_config32(dev, 0x44, 0xfed00001); hpet_address = pci_read_config32(dev, 0x44) & 0xfffffffe; - printk_debug("Enabling HPET @0x%lx\n", hpet_address); + printk(BIOS_DEBUG, "Enabling HPET @0x%lx\n", hpet_address); } unsigned pm_base=0; @@ -108,7 +108,7 @@ static void lpc_init(device_t dev) lpc_common_init(dev); pm_base = pci_read_config32(dev, 0x60) & 0xff00; - printk_info("%s: pm_base = %x \n", __func__, pm_base); + printk(BIOS_INFO, "%s: pm_base = %x \n", __func__, pm_base); #if CK804_CHIP_REV==1 if (dev->bus->secondary != 1) @@ -129,7 +129,7 @@ static void lpc_init(device_t dev) if (!on) byte |= 0x40; pci_write_config8(dev, PREVIOUS_POWER_STATE, byte); - printk_info("set power %s after power fail\n", on ? "on" : "off"); + printk(BIOS_INFO, "set power %s after power fail\n", on ? "on" : "off"); /* Throttle the CPU speed down for testing. */ on = SLOW_CPU_OFF; @@ -141,7 +141,7 @@ static void lpc_init(device_t dev) outl(((on << 1) + 0x10), (pm10_bar + 0x10)); dword = inl(pm10_bar + 0x10); on = 8 - on; - printk_debug("Throttling CPU %2d.%1.1d percent.\n", + printk(BIOS_DEBUG, "Throttling CPU %2d.%1.1d percent.\n", (on * 12) + (on >> 1), (on & 1) * 5); } #if 0 @@ -250,7 +250,7 @@ static void ck804_lpc_enable_childrens_resources(device_t dev) continue; base = res->base; end = resource_end(res); - printk_debug("ck804 lpc decode:%s, base=0x%08lx, end=0x%08lx\r\n", dev_path(child), base, end); + printk(BIOS_DEBUG, "ck804 lpc decode:%s, base=0x%08lx, end=0x%08lx\r\n", dev_path(child), base, end); switch (base) { case 0x3f8: // COM1 reg |= (1 << 0); diff --git a/src/southbridge/nvidia/ck804/ck804_pci.c b/src/southbridge/nvidia/ck804/ck804_pci.c index 70ccdc6329..ccbbbd48a9 100644 --- a/src/southbridge/nvidia/ck804/ck804_pci.c +++ b/src/southbridge/nvidia/ck804/ck804_pci.c @@ -53,13 +53,13 @@ static void pci_init(struct device *dev) if (!pref || pref->base > mem->base) { dword = mem->base & (0xffff0000UL); - printk_debug("PCI DOMAIN mem base = 0x%010Lx\n", mem->base); + printk(BIOS_DEBUG, "PCI DOMAIN mem base = 0x%010Lx\n", mem->base); } else { dword = pref->base & (0xffff0000UL); - printk_debug("PCI DOMAIN pref base = 0x%010Lx\n", pref->base); + printk(BIOS_DEBUG, "PCI DOMAIN pref base = 0x%010Lx\n", pref->base); } - printk_debug("[0x50] <-- 0x%08x\n", dword); + printk(BIOS_DEBUG, "[0x50] <-- 0x%08x\n", dword); pci_write_config32(dev, 0x50, dword); /* TOM */ } diff --git a/src/southbridge/nvidia/ck804/ck804_sata.c b/src/southbridge/nvidia/ck804/ck804_sata.c index e9218abf3a..8eed906ce8 100644 --- a/src/southbridge/nvidia/ck804/ck804_sata.c +++ b/src/southbridge/nvidia/ck804/ck804_sata.c @@ -26,7 +26,7 @@ static void sata_com_reset(struct device *dev, unsigned reset) base = (uint32_t *) pci_read_config32(dev, 0x24); - printk_debug("base = %08lx\n", base); + printk(BIOS_DEBUG, "base = %08lx\n", base); if (reset) { *(base + 4) = 0xffffffff; @@ -51,7 +51,7 @@ static void sata_com_reset(struct device *dev, unsigned reset) return; dword = *(base + 0); - printk_debug("*(base+0)=%08x\r\n", dword); + printk(BIOS_DEBUG, "*(base+0)=%08x\r\n", dword); if (dword == 0x113) { loop = 200000; // 2 do { @@ -60,11 +60,11 @@ static void sata_com_reset(struct device *dev, unsigned reset) break; udelay(10); } while (--loop > 0); - printk_debug("loop=%d, *(base+4)=%08x\r\n", loop, dword); + printk(BIOS_DEBUG, "loop=%d, *(base+4)=%08x\r\n", loop, dword); } dword = *(base + 0x40); - printk_debug("*(base+0x40)=%08x\r\n", dword); + printk(BIOS_DEBUG, "*(base+0x40)=%08x\r\n", dword); if (dword == 0x113) { loop = 200000; //2 do { @@ -73,7 +73,7 @@ static void sata_com_reset(struct device *dev, unsigned reset) break; udelay(10); } while (--loop > 0); - printk_debug("loop=%d, *(base+0x44)=%08x\r\n", loop, dword); + printk(BIOS_DEBUG, "loop=%d, *(base+0x44)=%08x\r\n", loop, dword); } } #endif @@ -91,12 +91,12 @@ static void sata_init(struct device *dev) if (conf->sata1_enable) { /* Enable secondary SATA interface. */ dword |= (1 << 0); - printk_debug("SATA S \t"); + printk(BIOS_DEBUG, "SATA S \t"); } if (conf->sata0_enable) { /* Enable primary SATA interface. */ dword |= (1 << 1); - printk_debug("SATA P \n"); + printk(BIOS_DEBUG, "SATA P \n"); } #if 0 /* Write back */ diff --git a/src/southbridge/nvidia/mcp55/mcp55.c b/src/southbridge/nvidia/mcp55/mcp55.c index 4c07a60162..aa86cf3bc7 100644 --- a/src/southbridge/nvidia/mcp55/mcp55.c +++ b/src/southbridge/nvidia/mcp55/mcp55.c @@ -218,7 +218,7 @@ void mcp55_enable(device_t dev) // reg |= (1<<0); reg &= ~(0x3f<<4); if (reg != reg_old) { - printk_debug("mcp55.c pcie enabled\n"); + printk(BIOS_DEBUG, "mcp55.c pcie enabled\n"); pci_write_config32(sm_dev, 0xe4, reg); } #endif diff --git a/src/southbridge/nvidia/mcp55/mcp55_aza.c b/src/southbridge/nvidia/mcp55/mcp55_aza.c index b86530b7af..cea0b49e8c 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_aza.c +++ b/src/southbridge/nvidia/mcp55/mcp55_aza.c @@ -80,7 +80,7 @@ static int codec_detect(uint8_t *base) /* 6 */ if(!dword) { set_bits(base + 0x08, 1, 0); - printk_debug("No codec!\n"); + printk(BIOS_DEBUG, "No codec!\n"); return 0; } return dword; @@ -186,15 +186,15 @@ static void codec_init(uint8_t *base, int addr) dword = read32(base + 0x64); /* 2 */ - printk_debug("codec viddid: %08x\n", dword); + printk(BIOS_DEBUG, "codec viddid: %08x\n", dword); verb_size = find_verb(dword, &verb); if(!verb_size) { - printk_debug("No verb!\n"); + printk(BIOS_DEBUG, "No verb!\n"); return; } - printk_debug("verb_size: %d\n", verb_size); + printk(BIOS_DEBUG, "verb_size: %d\n", verb_size); /* 3 */ for(i=0; i<verb_size; i++) { do { @@ -207,7 +207,7 @@ static void codec_init(uint8_t *base, int addr) dword = read32(base + 0x68); } while ((dword & 3) != 2); } - printk_debug("verb loaded!\n"); + printk(BIOS_DEBUG, "verb loaded!\n"); } static void codecs_init(uint8_t *base, uint32_t codec_mask) @@ -230,12 +230,12 @@ static void aza_init(struct device *dev) return; base =(uint8_t *) res->base; - printk_debug("base = %08x\n", base); + printk(BIOS_DEBUG, "base = %08x\n", base); codec_mask = codec_detect(base); if(codec_mask) { - printk_debug("codec_mask = %02x\n", codec_mask); + printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); codecs_init(base, codec_mask); } } diff --git a/src/southbridge/nvidia/mcp55/mcp55_fadt.c b/src/southbridge/nvidia/mcp55/mcp55_fadt.c index 212cbe6f3a..7c7ad6954c 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_fadt.c +++ b/src/southbridge/nvidia/mcp55/mcp55_fadt.c @@ -49,7 +49,7 @@ void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt) memcpy(header->asl_compiler_id, "CORE", 4); header->asl_compiler_revision = 42; - printk_info("ACPI: pm_base: %u...\n", pm_base); + printk(BIOS_INFO, "ACPI: pm_base: %u...\n", pm_base); fadt->firmware_ctrl = facs; fadt->dsdt = dsdt; diff --git a/src/southbridge/nvidia/mcp55/mcp55_ide.c b/src/southbridge/nvidia/mcp55/mcp55_ide.c index e62a5477d9..fac5997513 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_ide.c +++ b/src/southbridge/nvidia/mcp55/mcp55_ide.c @@ -43,12 +43,12 @@ static void ide_init(struct device *dev) if (conf->ide1_enable) { /* Enable secondary ide interface */ word |= (1<<0); - printk_debug("IDE1 \t"); + printk(BIOS_DEBUG, "IDE1 \t"); } if (conf->ide0_enable) { /* Enable primary ide interface */ word |= (1<<1); - printk_debug("IDE0\n"); + printk(BIOS_DEBUG, "IDE0\n"); } word |= (1<<12); diff --git a/src/southbridge/nvidia/mcp55/mcp55_lpc.c b/src/southbridge/nvidia/mcp55/mcp55_lpc.c index c247d98be1..869e8392e2 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_lpc.c +++ b/src/southbridge/nvidia/mcp55/mcp55_lpc.c @@ -80,7 +80,7 @@ static void enable_hpet(struct device *dev) pci_write_config32(dev,0x44, 0xfed00001); hpet_address=pci_read_config32(dev,0x44)& 0xfffffffe; - printk_debug("enabling HPET @0x%x\n", hpet_address); + printk(BIOS_DEBUG, "enabling HPET @0x%x\n", hpet_address); } static void lpc_init(device_t dev) @@ -108,7 +108,7 @@ static void lpc_init(device_t dev) byte |= 0x40; } pci_write_config8(dev, PREVIOUS_POWER_STATE, byte); - printk_info("set power %s after power fail\n", on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", on?"on":"off"); #endif /* Throttle the CPU speed down for testing */ on = SLOW_CPU_OFF; @@ -120,7 +120,7 @@ static void lpc_init(device_t dev) outl(((on<<1)+0x10) ,(pm10_bar + 0x10)); dword = inl(pm10_bar + 0x10); on = 8-on; - printk_debug("Throttling CPU %2d.%1.1d percent.\n", + printk(BIOS_DEBUG, "Throttling CPU %2d.%1.1d percent.\n", (on*12)+(on>>1),(on&1)*5); } @@ -224,7 +224,7 @@ static void mcp55_lpc_enable_childrens_resources(device_t dev) if(!(res->flags & IORESOURCE_IO)) continue; base = res->base; end = resource_end(res); - printk_debug("mcp55 lpc decode:%s, base=0x%08x, end=0x%08x\n",dev_path(child),base, end); + printk(BIOS_DEBUG, "mcp55 lpc decode:%s, base=0x%08x, end=0x%08x\n",dev_path(child),base, end); switch(base) { case 0x3f8: // COM1 reg |= (1<<0); break; diff --git a/src/southbridge/nvidia/mcp55/mcp55_nic.c b/src/southbridge/nvidia/mcp55/mcp55_nic.c index d3b92b97bb..92ea633a20 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_nic.c +++ b/src/southbridge/nvidia/mcp55/mcp55_nic.c @@ -83,13 +83,13 @@ static void phy_detect(uint8_t *base) val = phy_read(base, phyaddr, 2); if (val < 0 || val == 0xffff) continue; id |= ((val & 0xffff)<<16); - printk_debug("MCP55 MAC PHY ID 0x%08x PHY ADDR %d\n", id, i); + printk(BIOS_DEBUG, "MCP55 MAC PHY ID 0x%08x PHY ADDR %d\n", id, i); // if((id == 0xe0180000) || (id==0x0032cc00)) break; } if(i>32) { - printk_debug("MCP55 MAC PHY not found\n"); + printk(BIOS_DEBUG, "MCP55 MAC PHY not found\n"); } } diff --git a/src/southbridge/nvidia/mcp55/mcp55_pci.c b/src/southbridge/nvidia/mcp55/mcp55_pci.c index 3bc3a1ab18..02b0124884 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_pci.c +++ b/src/southbridge/nvidia/mcp55/mcp55_pci.c @@ -75,13 +75,13 @@ static void pci_init(struct device *dev) if (!pref || pref->base > mem->base) { dword = mem->base & (0xffff0000UL); - printk_debug("PCI DOMAIN mem base = 0x%010Lx\n", mem->base); + printk(BIOS_DEBUG, "PCI DOMAIN mem base = 0x%010Lx\n", mem->base); } else { dword = pref->base & (0xffff0000UL); - printk_debug("PCI DOMAIN pref base = 0x%010Lx\n", pref->base); + printk(BIOS_DEBUG, "PCI DOMAIN pref base = 0x%010Lx\n", pref->base); } - printk_debug("[0x50] <-- 0x%08x\n", dword); + printk(BIOS_DEBUG, "[0x50] <-- 0x%08x\n", dword); pci_write_config32(dev, 0x50, dword); /* TOM */ } diff --git a/src/southbridge/nvidia/mcp55/mcp55_sata.c b/src/southbridge/nvidia/mcp55/mcp55_sata.c index 1b40aa0983..8df5f6bcbd 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_sata.c +++ b/src/southbridge/nvidia/mcp55/mcp55_sata.c @@ -43,16 +43,16 @@ static void sata_init(struct device *dev) if (conf->sata1_enable) { /* Enable secondary SATA interface */ dword |= (1<<0); - printk_debug("SATA S \t"); + printk(BIOS_DEBUG, "SATA S \t"); } if (conf->sata0_enable) { /* Enable primary SATA interface */ dword |= (1<<1); - printk_debug("SATA P \n"); + printk(BIOS_DEBUG, "SATA P \n"); } } else { dword |= (1<<1) | (1<<0); - printk_debug("SATA P and S \n"); + printk(BIOS_DEBUG, "SATA P and S \n"); } diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c index 72d0390cd5..5d669e78ae 100644 --- a/src/southbridge/ricoh/rl5c476/rl5c476.c +++ b/src/southbridge/ricoh/rl5c476/rl5c476.c @@ -38,9 +38,9 @@ static void rl5c476_init(device_t dev) unsigned char *base; /* cardbus controller function 1 for CF Socket */ - printk_debug("Ricoh RL5c476: Initializing.\n"); + printk(BIOS_DEBUG, "Ricoh RL5c476: Initializing.\n"); - printk_debug("CF Base = %0x\n",cf_base); + printk(BIOS_DEBUG, "CF Base = %0x\n",cf_base); /* misc control register */ pci_write_config16(dev,0x82,0x00a0); @@ -48,7 +48,7 @@ static void rl5c476_init(device_t dev) /* set up second slot as compact flash port if asked to do so */ if (!enable_cf_boot) { - printk_debug("CF boot not enabled.\n"); + printk(BIOS_DEBUG, "CF boot not enabled.\n"); return; } @@ -152,7 +152,7 @@ static void rl5c476_init(device_t dev) */ unsigned char *cptr; cptr = (unsigned char *)(cf_base + 0x200); - printk_debug("CF Config = %x\n",*cptr); + printk(BIOS_DEBUG, "CF Config = %x\n",*cptr); /* Set CF to decode 16 IO bytes on any 16 byte boundary - * rely on the io windows of the bridge set up above to @@ -184,12 +184,12 @@ void rl5c476_read_resources(device_t dev) void rl5c476_set_resources(device_t dev) { struct resource *resource; - printk_debug("%s In set resources \n",dev_path(dev)); + printk(BIOS_DEBUG, "%s In set resources \n",dev_path(dev)); if( enable_cf_boot && (PCI_FUNC(dev->path.pci.devfn) == 1)){ resource = find_resource(dev,1); if( !(resource->flags & IORESOURCE_STORED) ){ resource->flags |= IORESOURCE_STORED ; - printk_debug("%s 1 ==> %x\n", dev_path(dev), resource->base); + printk(BIOS_DEBUG, "%s 1 ==> %x\n", dev_path(dev), resource->base); cf_base = resource->base; } } diff --git a/src/southbridge/sis/sis966/sis761.c b/src/southbridge/sis/sis966/sis761.c index b4eb48d559..43a235b01f 100644 --- a/src/southbridge/sis/sis966/sis761.c +++ b/src/southbridge/sis/sis966/sis761.c @@ -72,27 +72,27 @@ static inline msr_t rdmsr(unsigned index) static void sis761_read_resources(device_t dev) { /* Read the generic PCI resources */ - printk_debug("sis761_read_resources ------->\n"); + printk(BIOS_DEBUG, "sis761_read_resources ------->\n"); pci_dev_read_resources(dev); /* If we are not the first processor don't allocate the gart apeture */ if (dev->path.pci.devfn != PCI_DEVFN(0x0, 0)) { - printk_debug("sis761_not_the_first_processor !!!\n"); + printk(BIOS_DEBUG, "sis761_not_the_first_processor !!!\n"); return; } - printk_debug("sis761_read_resources <-------\n"); + printk(BIOS_DEBUG, "sis761_read_resources <-------\n"); return; } static void sis761_set_resources(device_t dev) { - printk_debug("sis761_set_resources ------->\n"); + printk(BIOS_DEBUG, "sis761_set_resources ------->\n"); /* Set the generic PCI resources */ pci_dev_set_resources(dev); - printk_debug("sis761_set_resources <-------\n"); + printk(BIOS_DEBUG, "sis761_set_resources <-------\n"); } static void sis761_init(struct device *dev) @@ -102,14 +102,14 @@ static void sis761_init(struct device *dev) needs_reset = 0; - printk_debug("sis761_init: ---------->\n"); + printk(BIOS_DEBUG, "sis761_init: ---------->\n"); msr = rdmsr(0xC001001A); pci_write_config16(dev, 0x8E, msr.lo >> 16); // Topbound pci_write_config8(dev, 0x7F, 0x08); // ACPI Base outb(inb(0x856) | 0x40, 0x856); // Auto-Reset Function - printk_debug("sis761_init: <----------\n"); + printk(BIOS_DEBUG, "sis761_init: <----------\n"); } diff --git a/src/southbridge/sis/sis966/sis966_aza.c b/src/southbridge/sis/sis966/sis966_aza.c index 1dc91ae45d..013f5895c1 100644 --- a/src/southbridge/sis/sis966/sis966_aza.c +++ b/src/southbridge/sis/sis966/sis966_aza.c @@ -101,23 +101,23 @@ static int codec_detect(uint8_t *base) int idx=0; /* 1 */ // controller reset - printk_debug("controller reset\n"); + printk(BIOS_DEBUG, "controller reset\n"); set_bits(base + 0x08, 1, 1); do{ dword = read32(base + 0x08)&0x1; - if(idx++>1000) { printk_debug("controller reset fail !!! \n"); break;} + if(idx++>1000) { printk(BIOS_DEBUG, "controller reset fail !!! \n"); break;} } while (dword !=1); dword=send_verb(base,0x000F0000); // get codec VendorId and DeviceId if(dword==0) { - printk_debug("No codec!\n"); + printk(BIOS_DEBUG, "No codec!\n"); return 0; } - printk_debug("Codec ID = %lx\n", dword); + printk(BIOS_DEBUG, "Codec ID = %lx\n", dword); dword=0x1; return dword; @@ -219,20 +219,20 @@ static void codec_init(uint8_t *base, int addr) dword = read32(base + 0x64); /* 2 */ - printk_debug("codec viddid: %08x\n", dword); + printk(BIOS_DEBUG, "codec viddid: %08x\n", dword); verb_size = find_verb(dword, &verb); if(!verb_size) { - printk_debug("No verb!\n"); + printk(BIOS_DEBUG, "No verb!\n"); return; } - printk_debug("verb_size: %d\n", verb_size); + printk(BIOS_DEBUG, "verb_size: %d\n", verb_size); /* 3 */ for(i=0; i<verb_size; i++) { send_verb(base,verb[i]); } - printk_debug("verb loaded!\n"); + printk(BIOS_DEBUG, "verb loaded!\n"); } static void codecs_init(uint8_t *base, uint32_t codec_mask) @@ -293,12 +293,12 @@ static void aza_init(struct device *dev) return; base =(uint8_t *) res->base; - printk_debug("base = %08x\n", base); + printk(BIOS_DEBUG, "base = %08x\n", base); codec_mask = codec_detect(base); if(codec_mask) { - printk_debug("codec_mask = %02x\n", codec_mask); + printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); codecs_init(base, codec_mask); } diff --git a/src/southbridge/sis/sis966/sis966_early_smbus.c b/src/southbridge/sis/sis966/sis966_early_smbus.c index cb6358bf8b..98b824f88a 100644 --- a/src/southbridge/sis/sis966/sis966_early_smbus.c +++ b/src/southbridge/sis/sis966/sis966_early_smbus.c @@ -481,23 +481,23 @@ void sis_init_stage2(void) // ========================== NB ============================= - printk_debug("Init NorthBridge sis761 -------->\n"); + printk(BIOS_DEBUG, "Init NorthBridge sis761 -------->\n"); dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0); msr = rdmsr(0xC001001A); - printk_debug("Memory Top Bound %lx\n",msr.lo ); + printk(BIOS_DEBUG, "Memory Top Bound %lx\n",msr.lo ); temp16=(pci_read_config8(dev, 0x4C) & 0xE0) >> 5; temp16=0x0001<<(temp16-1); temp16<<=8; - printk_debug("Integrated VGA Shared memory size=%dM bytes\n", temp16 >> 4); + printk(BIOS_DEBUG, "Integrated VGA Shared memory size=%dM bytes\n", temp16 >> 4); pci_write_config16(dev, 0x8E, (msr.lo >> 16) -temp16*1); pci_write_config8(dev, 0x7F, 0x08); // ACPI Base outb(inb(0x856) | 0x40, 0x856); // Auto-Reset Function // ========================== ACPI ============================= i=0; - printk_debug("Init ACPI -------->\n"); + printk(BIOS_DEBUG, "Init ACPI -------->\n"); do { temp8 = inb(0x800 + SiS_ACPI_2_init[i][0]); temp8 &= SiS_ACPI_2_init[i][1]; @@ -507,7 +507,7 @@ void sis_init_stage2(void) }while(SiS_ACPI_2_init[i][0] != 0); // ========================== Misc ============================= - printk_debug("Init Misc -------->\n"); + printk(BIOS_DEBUG, "Init Misc -------->\n"); dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS966_LPC), 0); /* R77h Internal PCI Device Enable 1 (Power On Value = 0h) @@ -533,7 +533,7 @@ void sis_init_stage2(void) pci_write_config8(dev, 0x7E, 0x00); // azalia controller enable temp8=inb(0x878)|0x4; //bit2=1 enable Azalia =0 enable AC97 outb(temp8, 0x878); // ACPI select AC97 or HDA controller - printk_debug("Audio select %x\n",inb(0x878)); + printk(BIOS_DEBUG, "Audio select %x\n",inb(0x878)); dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS966_SATA), 0); @@ -550,7 +550,7 @@ static void enable_smbus(void) { device_t dev; uint8_t temp8; - printk_debug("enable_smbus -------->\n"); + printk(BIOS_DEBUG, "enable_smbus -------->\n"); dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS966_LPC), 0); @@ -561,7 +561,7 @@ static void enable_smbus(void) temp8=pci_read_config8(dev, 0x76); // Enable SMBUS pci_write_config8(dev, 0x76, temp8 | 0x03); - printk_debug("enable_smbus <--------\n"); + printk(BIOS_DEBUG, "enable_smbus <--------\n"); } static int smbus_read_byte(unsigned device, unsigned address) diff --git a/src/southbridge/sis/sis966/sis966_ide.c b/src/southbridge/sis/sis966/sis966_ide.c index 62841e5098..1ee583f889 100644 --- a/src/southbridge/sis/sis966/sis966_ide.c +++ b/src/southbridge/sis/sis966/sis966_ide.c @@ -123,12 +123,12 @@ print_debug("IDE_INIT:---------->\n"); if (conf->ide1_enable) { /* Enable secondary ide interface */ word |= (1<<0); - printk_debug("IDE1 \t"); + printk(BIOS_DEBUG, "IDE1 \t"); } if (conf->ide0_enable) { /* Enable primary ide interface */ word |= (1<<1); - printk_debug("IDE0\n"); + printk(BIOS_DEBUG, "IDE0\n"); } word |= (1<<12); diff --git a/src/southbridge/sis/sis966/sis966_lpc.c b/src/southbridge/sis/sis966/sis966_lpc.c index 0786fcda79..c23e628970 100644 --- a/src/southbridge/sis/sis966/sis966_lpc.c +++ b/src/southbridge/sis/sis966/sis966_lpc.c @@ -92,7 +92,7 @@ static void lpc_init(device_t dev) int on; int nmi_option; - printk_debug("LPC_INIT -------->\n"); + printk(BIOS_DEBUG, "LPC_INIT -------->\n"); pc_keyboard_init(0); lpc_usb_legacy_init(dev); @@ -109,7 +109,7 @@ static void lpc_init(device_t dev) byte |= 0x40; } pci_write_config8(dev, PREVIOUS_POWER_STATE, byte); - printk_info("set power %s after power fail\n", on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", on?"on":"off"); /* Throttle the CPU speed down for testing */ on = SLOW_CPU_OFF; @@ -121,7 +121,7 @@ static void lpc_init(device_t dev) outl(((on<<1)+0x10) ,(pm10_bar + 0x10)); dword = inl(pm10_bar + 0x10); on = 8-on; - printk_debug("Throttling CPU %2d.%1.1d percent.\n", + printk(BIOS_DEBUG, "Throttling CPU %2d.%1.1d percent.\n", (on*12)+(on>>1),(on&1)*5); } @@ -151,7 +151,7 @@ static void lpc_init(device_t dev) /* Initialize isa dma */ isa_dma_init(); - printk_debug("LPC_INIT <--------\n"); + printk(BIOS_DEBUG, "LPC_INIT <--------\n"); } static void sis966_lpc_read_resources(device_t dev) @@ -214,7 +214,7 @@ static void sis966_lpc_enable_childrens_resources(device_t dev) if(!(res->flags & IORESOURCE_IO)) continue; base = res->base; end = resource_end(res); - printk_debug("sis966 lpc decode:%s, base=0x%08x, end=0x%08x\n",dev_path(child),base, end); + printk(BIOS_DEBUG, "sis966 lpc decode:%s, base=0x%08x, end=0x%08x\n",dev_path(child),base, end); switch(base) { case 0x3f8: // COM1 reg |= (1<<0); break; diff --git a/src/southbridge/sis/sis966/sis966_nic.c b/src/southbridge/sis/sis966/sis966_nic.c index 9fadcf9419..62017360e7 100644 --- a/src/southbridge/sis/sis966/sis966_nic.c +++ b/src/southbridge/sis/sis966/sis966_nic.c @@ -75,12 +75,12 @@ static void readApcMacAddr(void) outl(0x80001048,0xcf8); outl((inl(0xcfc) & 0xfffffffd),0xcfc ); // enable IO78/79h for APC Index/Data - printk_debug("MAC addr in APC = "); + printk(BIOS_DEBUG, "MAC addr in APC = "); for(i = 0x9 ; i <=0xe ; i++) { - printk_debug("%2.2x",readApcByte(i)); + printk(BIOS_DEBUG, "%2.2x",readApcByte(i)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Set APC Reload */ writeApcByte(0x7,readApcByte(0x7)&0xf7); @@ -192,7 +192,7 @@ static int phy_read(uint32_t base, unsigned phy_addr, unsigned phy_reg) mdelay(20); ulValue = read32(base+0x44); } while((ulValue & SMI_REQUEST) != 0); - //printk_debug("base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue); + //printk(BIOS_DEBUG, "base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue); usData=(ulValue>>16); @@ -227,7 +227,7 @@ static int phy_detect(uint32_t base,uint16_t *PhyAddr) //BOOL PHY_Detect() if(!bFoundPhy) { - printk_debug("PHY not found !!!! \n"); + printk(BIOS_DEBUG, "PHY not found !!!! \n"); } *PhyAddr=PhyAddress; @@ -270,15 +270,15 @@ static void nic_init(struct device *dev) if(!res) { - printk_debug("NIC Cannot find resource..\r\n"); + printk(BIOS_DEBUG, "NIC Cannot find resource..\r\n"); return; } base = res->base; - printk_debug("NIC base address %lx\n",base); + printk(BIOS_DEBUG, "NIC base address %lx\n",base); if(!(val=phy_detect(base,&PhyAddr))) { - printk_debug("PHY detect fail !!!!\r\n"); + printk(BIOS_DEBUG, "PHY detect fail !!!!\r\n"); return; } @@ -291,7 +291,7 @@ static void nic_init(struct device *dev) // if that is valid we will use that - printk_debug("EEPROM contents %x \n",ReadEEprom( dev, base, 0LL)); + printk(BIOS_DEBUG, "EEPROM contents %x \n",ReadEEprom( dev, base, 0LL)); for(i=0;i<3;i++) { //status = smbus_read_byte(dev_eeprom, i); ulValue=ReadEEprom( dev, base, i+3L); @@ -302,7 +302,7 @@ static void nic_init(struct device *dev) } }else{ // read MAC address from firmware - printk_debug("EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue); + printk(BIOS_DEBUG, "EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue); MacAddr[0]=read16(0xffffffc0); // mac address store at here MacAddr[1]=read16(0xffffffc2); MacAddr[2]=read16(0xffffffc4); diff --git a/src/southbridge/sis/sis966/sis966_sata.c b/src/southbridge/sis/sis966/sis966_sata.c index b15869c677..7fcee82f29 100644 --- a/src/southbridge/sis/sis966/sis966_sata.c +++ b/src/southbridge/sis/sis966/sis966_sata.c @@ -141,7 +141,7 @@ for (i=0;i<10;i++){ temp32=0; temp32= pci_read_config32(dev, 0xC0); for ( j=0;j<0xFFFF;j++); - printk_debug("status= %x\n",temp32); + printk(BIOS_DEBUG, "status= %x\n",temp32); if (((temp32&0xF) == 0x3) || ((temp32&0xF) == 0x0)) break; } diff --git a/src/southbridge/sis/sis966/sis966_usb2.c b/src/southbridge/sis/sis966/sis966_usb2.c index 35dec13453..437583d12f 100644 --- a/src/southbridge/sis/sis966/sis966_usb2.c +++ b/src/southbridge/sis/sis966/sis966_usb2.c @@ -95,7 +95,7 @@ static void usb2_init(struct device *dev) return; base =(uint8_t *) res->base; - printk_debug("base = %08x\n", base); + printk(BIOS_DEBUG, "base = %08x\n", base); write32(base+0x20, 0x2); //----------------------------------------------------------- diff --git a/src/southbridge/ti/pci7420/pci7420_cardbus.c b/src/southbridge/ti/pci7420/pci7420_cardbus.c index 78fb3ba1f8..7165822ea7 100644 --- a/src/southbridge/ti/pci7420/pci7420_cardbus.c +++ b/src/southbridge/ti/pci7420/pci7420_cardbus.c @@ -41,10 +41,10 @@ static void pci7420_cardbus_init(device_t dev) struct southbridge_ti_pci7420_config *config = dev->chip_info; int smartcard_enabled = 0; - printk_debug("TI PCI7420/7620 init\n"); + printk(BIOS_DEBUG, "TI PCI7420/7620 init\n"); if (!config) { - printk_debug("PCI7420: No configuration found.\n"); + printk(BIOS_DEBUG, "PCI7420: No configuration found.\n"); } else { smartcard_enabled = config->smartcard_enabled; } @@ -90,11 +90,11 @@ void pci7420_cardbus_read_resources(device_t dev) void pci7420_cardbus_set_resources(device_t dev) { - printk_debug("%s In set resources \n",dev_path(dev)); + printk(BIOS_DEBUG, "%s In set resources \n",dev_path(dev)); pci_dev_set_resources(dev); - printk_debug("%s done set resources \n",dev_path(dev)); + printk(BIOS_DEBUG, "%s done set resources \n",dev_path(dev)); } static struct device_operations ti_pci7420_ops = { diff --git a/src/southbridge/ti/pci7420/pci7420_firewire.c b/src/southbridge/ti/pci7420/pci7420_firewire.c index 01ca4878f7..4d855b30b5 100644 --- a/src/southbridge/ti/pci7420/pci7420_firewire.c +++ b/src/southbridge/ti/pci7420/pci7420_firewire.c @@ -32,7 +32,7 @@ static void pci7420_firewire_init(device_t dev) { u8 reg8; - printk_debug("TI PCI7420/7620 FireWire init\n"); + printk(BIOS_DEBUG, "TI PCI7420/7620 FireWire init\n"); #ifdef ODD_IRQ_FIXUP /* This is a workaround for buggy kernels. This should diff --git a/src/southbridge/via/k8t890/k8m890_chrome.c b/src/southbridge/via/k8t890/k8m890_chrome.c index fdf55aa929..2cbd9382ae 100644 --- a/src/southbridge/via/k8t890/k8m890_chrome.c +++ b/src/southbridge/via/k8t890/k8m890_chrome.c @@ -125,7 +125,7 @@ chrome_init(struct device *dev) fb_size = k8m890_host_fb_size_get(); if (!fb_size) { - printk_warning("Chrome: Device has not been initialised in the" + printk(BIOS_WARNING, "Chrome: Device has not been initialised in the" " ramcontroller!\n"); return; } @@ -133,11 +133,11 @@ chrome_init(struct device *dev) fb_address = pci_read_config32(dev, 0x10); fb_address &= ~0x0F; if (!fb_address) { - printk_warning("Chrome: No FB BAR assigned!\n"); + printk(BIOS_WARNING, "Chrome: No FB BAR assigned!\n"); return; } - printk_info("Chrome: Using %dMB Framebuffer at 0x%08X.\n", + printk(BIOS_INFO, "Chrome: Using %dMB Framebuffer at 0x%08X.\n", fb_size, fb_address); //k8m890_host_fb_direct_set(fb_address); @@ -154,7 +154,7 @@ chrome_init(struct device *dev) vga_console_init(); #endif - printk_info("Chrome VGA Textmode initialized.\n"); + printk(BIOS_INFO, "Chrome VGA Textmode initialized.\n"); #if CONFIG_CONSOLE_VGA == 0 /* if we don't have console, at least print something... */ diff --git a/src/southbridge/via/k8t890/k8t890_dram.c b/src/southbridge/via/k8t890/k8t890_dram.c index 84a41a46b8..ac67d4a5b6 100644 --- a/src/southbridge/via/k8t890/k8t890_dram.c +++ b/src/southbridge/via/k8t890/k8t890_dram.c @@ -82,7 +82,7 @@ static void get_memres(void *gp, struct device *dev, struct resource *res) unsigned int *fbsize = (unsigned int *) gp; uint64_t proposed_base = res->base + res->size - *fbsize; - printk_debug("get_memres: res->base=%llx res->size=%llx %d %d %d\n", + printk(BIOS_DEBUG, "get_memres: res->base=%llx res->size=%llx %d %d %d\n", res->base, res->size, (res->size > *fbsize), (!(proposed_base & (*fbsize - 1))), (proposed_base < ((uint64_t) 0xffffffff))); @@ -99,7 +99,7 @@ extern uint64_t high_tables_base, high_tables_size; if ((high_tables_base) && ((high_tables_base > proposed_base) && (high_tables_base < (res->base + res->size)))) { high_tables_base = proposed_base - high_tables_size; - printk_debug("Moving the high_tables_base pointer to " + printk(BIOS_DEBUG, "Moving the high_tables_base pointer to " "new base %llx\n", high_tables_base); } #endif @@ -140,12 +140,12 @@ static void dram_init_fb(struct device *dev) ret = get_option(&fbbits, "videoram_size"); if (ret) { - printk_warning("Failed to get videoram size (error %d), using default.\n", ret); + printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret); fbbits = 5; } if ((fbbits < 1) || (fbbits > 7)) { - printk_warning("Invalid videoram size (%d), using default.\n", + printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n", 4 << fbbits); fbbits = 5; } @@ -159,14 +159,14 @@ static void dram_init_fb(struct device *dev) /* no space for FB */ if (!resmax) { - printk_err("VIA FB: no space for framebuffer in RAM\n"); + printk(BIOS_ERR, "VIA FB: no space for framebuffer in RAM\n"); return; } proposed_base = resmax->base + resmax->size - fbsize; resmax->size -= fbsize; - printk_info("K8M890: Using a %dMB framebuffer.\n", 4 << fbbits); + printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", 4 << fbbits); /* Step 1: enable UMA but no FB */ pci_write_config8(dev, 0xa1, 0x80); diff --git a/src/southbridge/via/k8t890/k8t890_early_car.c b/src/southbridge/via/k8t890/k8t890_early_car.c index 2b0c9e1609..a0a269bb94 100644 --- a/src/southbridge/via/k8t890/k8t890_early_car.c +++ b/src/southbridge/via/k8t890/k8t890_early_car.c @@ -114,7 +114,7 @@ u8 k8t890_early_setup_ht(void) int s3_save_nvram_early(u32 dword, int size, int nvram_pos) { - printk_debug("Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos); + printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos); switch (size) { case 1: outb((dword & 0xff), K8T890_NVRAM_IO_BASE+nvram_pos); @@ -149,6 +149,6 @@ int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) { nvram_pos +=4; break; } - printk_debug("Loading %x of size %d to nvram pos:%d\n", * old_dword, size, nvram_pos-size); + printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n", * old_dword, size, nvram_pos-size); return nvram_pos; } diff --git a/src/southbridge/via/k8t890/k8t890_pcie.c b/src/southbridge/via/k8t890/k8t890_pcie.c index 645296d40f..804398cf88 100644 --- a/src/southbridge/via/k8t890/k8t890_pcie.c +++ b/src/southbridge/via/k8t890/k8t890_pcie.c @@ -28,7 +28,7 @@ static void peg_init(struct device *dev) { u8 reg; - printk_debug("Configuring PCIe PEG\n"); + printk(BIOS_DEBUG, "Configuring PCIe PEG\n"); dump_south(dev); /* Disable link. */ @@ -68,7 +68,7 @@ static void pcie_init(struct device *dev) { u8 reg; - printk_debug("Configuring PCIe PEXs\n"); + printk(BIOS_DEBUG, "Configuring PCIe PEXs\n"); dump_south(dev); /* Disable link. */ diff --git a/src/southbridge/via/vt8231/vt8231.c b/src/southbridge/via/vt8231/vt8231.c index 5f8ab45009..f943524665 100644 --- a/src/southbridge/via/vt8231/vt8231.c +++ b/src/southbridge/via/vt8231/vt8231.c @@ -14,7 +14,7 @@ static device_t lpc_dev; void hard_reset(void) { - printk_err("NO HARD RESET ON VT8231! FIX ME!\n"); + printk(BIOS_ERR, "NO HARD RESET ON VT8231! FIX ME!\n"); } static void keyboard_on(void) diff --git a/src/southbridge/via/vt8231/vt8231_acpi.c b/src/southbridge/via/vt8231/vt8231_acpi.c index 87c5e876fd..6cbf4c591f 100644 --- a/src/southbridge/via/vt8231/vt8231_acpi.c +++ b/src/southbridge/via/vt8231/vt8231_acpi.c @@ -6,7 +6,7 @@ static void acpi_init(struct device *dev) { - printk_debug("Configuring VIA ACPI\n"); + printk(BIOS_DEBUG, "Configuring VIA ACPI\n"); // Set ACPI base address to IO 0x4000 pci_write_config32(dev, 0x48, 0x4001); diff --git a/src/southbridge/via/vt8231/vt8231_ide.c b/src/southbridge/via/vt8231/vt8231_ide.c index a151ca06c9..c1df5ef5cd 100644 --- a/src/southbridge/via/vt8231/vt8231_ide.c +++ b/src/southbridge/via/vt8231/vt8231_ide.c @@ -19,22 +19,22 @@ static void ide_init(struct device *dev) */ /* - printk_info("%s: enabling compatibility IDE addresses\n", __func__); + printk(BIOS_INFO, "%s: enabling compatibility IDE addresses\n", __func__); enables = pci_read_config8(dev, 0x42); - printk_debug("enables in reg 0x42 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x42 0x%x\n", enables); enables &= ~0xc0; // compatability mode pci_write_config8(dev, 0x42, enables); enables = pci_read_config8(dev, 0x42); - printk_debug("enables in reg 0x42 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n", enables); */ } enables = pci_read_config8(dev, 0x40); - printk_debug("enables in reg 0x40 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables); enables |= 3; pci_write_config8(dev, 0x40, enables); enables = pci_read_config8(dev, 0x40); - printk_debug("enables in reg 0x40 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables); // Enable prefetch buffers enables = pci_read_config8(dev, 0x41); @@ -58,7 +58,7 @@ static void ide_init(struct device *dev) // kevinh@ispiri.com - the standard linux drivers seem ass slow when // used in native mode - I've changed back to classic enables = pci_read_config8(dev, 0x9); - printk_debug("enables in reg 0x9 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables); // by the book, set the low-order nibble to 0xa. if (conf->enable_native_ide) { enables &= ~0xf; @@ -70,11 +70,11 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x9, enables); enables = pci_read_config8(dev, 0x9); - printk_debug("enables in reg 0x9 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables); // standard bios sets master bit. enables = pci_read_config8(dev, 0x4); - printk_debug("command in reg 0x4 0x%x\n", enables); + printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables); enables |= 7; // No need for stepping - kevinh@ispiri.com @@ -82,7 +82,7 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x4, enables); enables = pci_read_config8(dev, 0x4); - printk_debug("command in reg 0x4 reads back as 0x%x\n", enables); + printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables); if (!conf->enable_native_ide) { // Use compatability mode - per award bios diff --git a/src/southbridge/via/vt8231/vt8231_lpc.c b/src/southbridge/via/vt8231/vt8231_lpc.c index cee46b51bb..9799195d87 100644 --- a/src/southbridge/via/vt8231/vt8231_lpc.c +++ b/src/southbridge/via/vt8231/vt8231_lpc.c @@ -23,7 +23,7 @@ static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 }; static void pci_routing_fixup(struct device *dev) { - printk_info("%s: dev is %p\n", __func__, dev); + printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev); if (dev) { /* initialize PCI interupts - these assignments depend on the PCB routing of PINTA-D @@ -39,17 +39,17 @@ static void pci_routing_fixup(struct device *dev) } // Standard southbridge components - printk_info("setting southbridge\n"); + printk(BIOS_INFO, "setting southbridge\n"); pci_assign_irqs(0, 0x11, southbridgeIrqs); // Ethernet built into southbridge - printk_info("setting ethernet\n"); + printk(BIOS_INFO, "setting ethernet\n"); pci_assign_irqs(0, 0x12, enetIrqs); // PCI slot - printk_info("setting pci slot\n"); + printk(BIOS_INFO, "setting pci slot\n"); pci_assign_irqs(0, 0x14, slotIrqs); - printk_info("%s: DONE\n", __func__); + printk(BIOS_INFO, "%s: DONE\n", __func__); } static void vt8231_init(struct device *dev) @@ -57,7 +57,7 @@ static void vt8231_init(struct device *dev) unsigned char enables; struct southbridge_via_vt8231_config *conf = dev->chip_info; - printk_debug("vt8231 init\n"); + printk(BIOS_DEBUG, "vt8231 init\n"); // enable the internal I/O decode enables = pci_read_config8(dev, 0x6C); @@ -102,18 +102,18 @@ static void vt8231_init(struct device *dev) // First do some more things to devfn (17,0) // note: this should already be cleared, according to the book. enables = pci_read_config8(dev, 0x50); - printk_debug("IDE enable in reg. 50 is 0x%x\n", enables); + printk(BIOS_DEBUG, "IDE enable in reg. 50 is 0x%x\n", enables); enables &= ~8; // need manifest constant here! - printk_debug("set IDE reg. 50 to 0x%x\n", enables); + printk(BIOS_DEBUG, "set IDE reg. 50 to 0x%x\n", enables); pci_write_config8(dev, 0x50, enables); // set default interrupt values (IDE) enables = pci_read_config8(dev, 0x4c); - printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf); + printk(BIOS_DEBUG, "IRQs in reg. 4c are 0x%x\n", enables & 0xf); // clear out whatever was there. enables &= ~0xf; enables |= 4; - printk_debug("setting reg. 4c to 0x%x\n", enables); + printk(BIOS_DEBUG, "setting reg. 4c to 0x%x\n", enables); pci_write_config8(dev, 0x4c, enables); // set up the serial port interrupts. diff --git a/src/southbridge/via/vt8231/vt8231_nic.c b/src/southbridge/via/vt8231/vt8231_nic.c index 828cdaf2f6..d4771f6816 100644 --- a/src/southbridge/via/vt8231/vt8231_nic.c +++ b/src/southbridge/via/vt8231/vt8231_nic.c @@ -12,7 +12,7 @@ static void nic_init(struct device *dev) { uint8_t byte; - printk_debug("Configuring VIA LAN\n"); + printk(BIOS_DEBUG, "Configuring VIA LAN\n"); /* We don't need stepping - though the device supports it */ byte = pci_read_config8(dev, PCI_COMMAND); diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c index f384847d5c..228da0f948 100644 --- a/src/southbridge/via/vt8235/vt8235.c +++ b/src/southbridge/via/vt8235/vt8235.c @@ -14,7 +14,7 @@ static int enabled = 0; void hard_reset(void) { - printk_err("NO HARD RESET ON VT8235! FIX ME!\n"); + printk(BIOS_ERR, "NO HARD RESET ON VT8235! FIX ME!\n"); } static void keyboard_on(struct device *dev) @@ -34,11 +34,11 @@ void dump_south(device_t dev0) int i,j; for(i = 0; i < 256; i += 16) { - printk_debug("0x%x: ", i); + printk(BIOS_DEBUG, "0x%x: ", i); for(j = 0; j < 16; j++) { - printk_debug("%02x ", pci_read_config8(dev0, i+j)); + printk(BIOS_DEBUG, "%02x ", pci_read_config8(dev0, i+j)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } } @@ -61,7 +61,7 @@ static void vt8235_enable(struct device *dev) vendor = pci_read_config16(dev,0); model = pci_read_config16(dev,0x2); - printk_debug("In vt8235_enable %04x %04x.\n",vendor,model); + printk(BIOS_DEBUG, "In vt8235_enable %04x %04x.\n",vendor,model); /* if this is not the southbridge itself just return */ /* this is necessary because USB devices are slot 10, whereas this device is slot 11 @@ -70,7 +70,7 @@ static void vt8235_enable(struct device *dev) if( (vendor != PCI_VENDOR_ID_VIA) || (model != PCI_DEVICE_ID_VIA_8235)) return; - printk_debug("Initialising Devices\n"); + printk(BIOS_DEBUG, "Initialising Devices\n"); setup_i8259(); // make sure interupt controller is configured before keyboard init diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c index 9c2af3c781..ec22f9053b 100644 --- a/src/southbridge/via/vt8235/vt8235_ide.c +++ b/src/southbridge/via/vt8235/vt8235_ide.c @@ -10,7 +10,7 @@ static void ide_init(struct device *dev) struct southbridge_via_vt8235_config *conf = dev->chip_info; unsigned char enables; - printk_info("Enabling VIA IDE.\n"); + printk(BIOS_INFO, "Enabling VIA IDE.\n"); /*if (!conf->enable_native_ide) { */ /* @@ -18,23 +18,23 @@ static void ide_init(struct device *dev) * use PCI interrupts. Using PCI ints confuses linux for some * reason. */ - printk_info("%s: enabling compatibility IDE addresses\n", + printk(BIOS_INFO, "%s: enabling compatibility IDE addresses\n", __func__); enables = pci_read_config8(dev, 0x42); - printk_debug("enables in reg 0x42 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x42 0x%x\n", enables); enables &= ~0xc0; // compatability mode pci_write_config8(dev, 0x42, enables); enables = pci_read_config8(dev, 0x42); - printk_debug("enables in reg 0x42 read back as 0x%x\n", + printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n", enables); /* } */ enables = pci_read_config8(dev, 0x40); - printk_debug("enables in reg 0x40 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables); enables |= 3; pci_write_config8(dev, 0x40, enables); enables = pci_read_config8(dev, 0x40); - printk_debug("enables in reg 0x40 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables); // Enable prefetch buffers enables = pci_read_config8(dev, 0x41); @@ -58,7 +58,7 @@ static void ide_init(struct device *dev) // kevinh@ispiri.com - the standard linux drivers seem ass slow when // used in native mode - I've changed back to classic enables = pci_read_config8(dev, 0x9); - printk_debug("enables in reg 0x9 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables); // by the book, set the low-order nibble to 0xa. if (conf->enable_native_ide) { enables &= ~0xf; @@ -70,11 +70,11 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x9, enables); enables = pci_read_config8(dev, 0x9); - printk_debug("enables in reg 0x9 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables); // standard bios sets master bit. enables = pci_read_config8(dev, 0x4); - printk_debug("command in reg 0x4 0x%x\n", enables); + printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables); enables |= 7; // No need for stepping - kevinh@ispiri.com @@ -82,7 +82,7 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x4, enables); enables = pci_read_config8(dev, 0x4); - printk_debug("command in reg 0x4 reads back as 0x%x\n", enables); + printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables); if (!conf->enable_native_ide) { // Use compatability mode - per award bios diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c index 052c4c9415..92ba973661 100644 --- a/src/southbridge/via/vt8235/vt8235_lpc.c +++ b/src/southbridge/via/vt8235/vt8235_lpc.c @@ -56,7 +56,7 @@ static unsigned char *pin_to_irq(const unsigned char *pin) static void pci_routing_fixup(struct device *dev) { - printk_info("%s: dev is %p\n", __func__, dev); + printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev); /* set up PCI IRQ routing */ pci_write_config8(dev, 0x55, pciIrqs[0] << 4); @@ -65,38 +65,38 @@ static void pci_routing_fixup(struct device *dev) // firewire built into southbridge - printk_info("setting firewire\n"); + printk(BIOS_INFO, "setting firewire\n"); pci_assign_irqs(0, 0x0d, pin_to_irq(firewirePins)); // Standard usb components - printk_info("setting usb\n"); + printk(BIOS_INFO, "setting usb\n"); pci_assign_irqs(0, 0x10, pin_to_irq(usbPins)); // VT8235 + sound hardware - printk_info("setting vt8235\n"); + printk(BIOS_INFO, "setting vt8235\n"); pci_assign_irqs(0, 0x11, pin_to_irq(vt8235Pins)); // Ethernet built into southbridge - printk_info("setting ethernet\n"); + printk(BIOS_INFO, "setting ethernet\n"); pci_assign_irqs(0, 0x12, pin_to_irq(enetPins)); // VGA - printk_info("setting vga\n"); + printk(BIOS_INFO, "setting vga\n"); pci_assign_irqs(1, 0x00, pin_to_irq(vgaPins)); // PCI slot - printk_info("setting pci slot\n"); + printk(BIOS_INFO, "setting pci slot\n"); pci_assign_irqs(0, 0x14, pin_to_irq(slotPins)); // Cardbus slot - printk_info("setting cardbus slot\n"); + printk(BIOS_INFO, "setting cardbus slot\n"); pci_assign_irqs(0, 0x0a, pin_to_irq(cbPins)); // Via 2 slot riser card 2nd slot - printk_info("setting riser slot\n"); + printk(BIOS_INFO, "setting riser slot\n"); pci_assign_irqs(0, 0x13, pin_to_irq(riserPins)); - printk_spew("%s: DONE\n", __func__); + printk(BIOS_SPEW, "%s: DONE\n", __func__); } /* @@ -154,7 +154,7 @@ static void vt8235_init(struct device *dev) { unsigned char enables; - printk_debug("vt8235 init\n"); + printk(BIOS_DEBUG, "vt8235 init\n"); // enable the internal I/O decode enables = pci_read_config8(dev, 0x6C); diff --git a/src/southbridge/via/vt8235/vt8235_nic.c b/src/southbridge/via/vt8235/vt8235_nic.c index 09ea17e078..86fef895de 100644 --- a/src/southbridge/via/vt8235/vt8235_nic.c +++ b/src/southbridge/via/vt8235/vt8235_nic.c @@ -12,7 +12,7 @@ static void nic_init(struct device *dev) { uint8_t byte; - printk_debug("Configuring VIA Rhine LAN\n"); + printk(BIOS_DEBUG, "Configuring VIA Rhine LAN\n"); /* We don't need stepping - though the device supports it */ byte = pci_read_config8(dev, PCI_COMMAND); diff --git a/src/southbridge/via/vt8235/vt8235_usb.c b/src/southbridge/via/vt8235/vt8235_usb.c index 2318465058..8b2a685807 100644 --- a/src/southbridge/via/vt8235/vt8235_usb.c +++ b/src/southbridge/via/vt8235/vt8235_usb.c @@ -9,7 +9,7 @@ static void usb_init(struct device *dev) { - printk_debug("Configuring VIA USB 1.1\n"); + printk(BIOS_DEBUG, "Configuring VIA USB 1.1\n"); /* pci_write_config8(dev, 0x04, 0x07); */ diff --git a/src/southbridge/via/vt8237r/vt8237r.c b/src/southbridge/via/vt8237r/vt8237r.c index 8be26db608..2b5d34bccc 100644 --- a/src/southbridge/via/vt8237r/vt8237r.c +++ b/src/southbridge/via/vt8237r/vt8237r.c @@ -30,7 +30,7 @@ void hard_reset(void) { - printk_err("NO HARD RESET ON VT8237R! FIX ME!\n"); + printk(BIOS_ERR, "NO HARD RESET ON VT8237R! FIX ME!\n"); } #if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 7 @@ -61,10 +61,10 @@ void dump_south(device_t dev) int i, j; for (i = 0; i < 256; i += 16) { - printk_debug("%02x: ", i); + printk(BIOS_DEBUG, "%02x: ", i); for (j = 0; j < 16; j++) - printk_debug("%02x ", pci_read_config8(dev, i + j)); - printk_debug("\n"); + printk(BIOS_DEBUG, "%02x ", pci_read_config8(dev, i + j)); + printk(BIOS_DEBUG, "\n"); } } diff --git a/src/southbridge/via/vt8237r/vt8237r_ide.c b/src/southbridge/via/vt8237r/vt8237r_ide.c index 86a87ac791..0b4dccc2f0 100644 --- a/src/southbridge/via/vt8237r/vt8237r_ide.c +++ b/src/southbridge/via/vt8237r/vt8237r_ide.c @@ -40,15 +40,15 @@ static void ide_init(struct device *dev) device_t lpc_dev; int i, j; - printk_info("%s IDE interface %s\n", "Primary", + printk(BIOS_INFO, "%s IDE interface %s\n", "Primary", sb->ide0_enable ? "enabled" : "disabled"); - printk_info("%s IDE interface %s\n", "Secondary", + printk(BIOS_INFO, "%s IDE interface %s\n", "Secondary", sb->ide1_enable ? "enabled" : "disabled"); enables = pci_read_config8(dev, IDE_CS) & ~0x3; enables |= (sb->ide0_enable << 1) | sb->ide1_enable; pci_write_config8(dev, IDE_CS, enables); enables = pci_read_config8(dev, IDE_CS); - printk_debug("Enables in reg 0x40 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "Enables in reg 0x40 read back as 0x%x\n", enables); /* Enable only compatibility mode. */ enables = pci_read_config8(dev, 0x09); @@ -59,7 +59,7 @@ static void ide_init(struct device *dev) enables &= ~0xc0; pci_write_config8(dev, IDE_CONF_II, enables); enables = pci_read_config8(dev, IDE_CONF_II); - printk_debug("Enables in reg 0x42 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "Enables in reg 0x42 read back as 0x%x\n", enables); /* Enable prefetch buffers. */ enables = pci_read_config8(dev, IDE_CONF_I); diff --git a/src/southbridge/via/vt8237r/vt8237r_lpc.c b/src/southbridge/via/vt8237r/vt8237r_lpc.c index d53028128f..4e09823a69 100644 --- a/src/southbridge/via/vt8237r/vt8237r_lpc.c +++ b/src/southbridge/via/vt8237r/vt8237r_lpc.c @@ -238,7 +238,7 @@ static void setup_pm(device_t dev) tmp = inw(VT8237R_ACPI_IO_BASE + 0x04); #if CONFIG_HAVE_ACPI_RESUME == 1 acpi_slp_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0 ; - printk_debug("SLP_TYP type was %x %x\n", tmp, acpi_slp_type); + printk(BIOS_DEBUG, "SLP_TYP type was %x %x\n", tmp, acpi_slp_type); #endif /* clear sleep */ tmp &= ~(7 << 10); @@ -251,7 +251,7 @@ static void vt8237r_init(struct device *dev) u8 enables, reg8; #if CONFIG_EPIA_VT8237R_INIT - printk_spew("Entering vt8237r_init, for EPIA.\n"); + printk(BIOS_SPEW, "Entering vt8237r_init, for EPIA.\n"); /* * TODO: Looks like stock BIOS can do this but causes a hang * Enable SATA LED, disable special CPU Frequency Change - @@ -277,7 +277,7 @@ static void vt8237r_init(struct device *dev) pci_write_config8(dev, 0x4E, enables); #else - printk_spew("Entering vt8237r_init.\n"); + printk(BIOS_SPEW, "Entering vt8237r_init.\n"); /* * Enable SATA LED, disable special CPU Frequency Change - * GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs. @@ -318,7 +318,7 @@ static void vt8237r_init(struct device *dev) outb(0x1, VT8237R_ACPI_IO_BASE + 0x11); #endif - printk_spew("Leaving %s.\n", __func__); + printk(BIOS_SPEW, "Leaving %s.\n", __func__); } static void vt8237s_init(struct device *dev) diff --git a/src/southbridge/via/vt8237r/vt8237r_sata.c b/src/southbridge/via/vt8237r/vt8237r_sata.c index b0c58aa9c1..8d09057f27 100644 --- a/src/southbridge/via/vt8237r/vt8237r_sata.c +++ b/src/southbridge/via/vt8237r/vt8237r_sata.c @@ -28,7 +28,7 @@ static void sata_i_init(struct device *dev) { u8 reg; - printk_debug("Configuring VIA SATA controller\n"); + printk(BIOS_DEBUG, "Configuring VIA SATA controller\n"); /* Class IDE Disk */ reg = pci_read_config8(dev, SATA_MISC_CTRL); diff --git a/src/southbridge/via/vt8237r/vt8237r_usb.c b/src/southbridge/via/vt8237r/vt8237r_usb.c index 2c554ca3da..4bd33d6346 100644 --- a/src/southbridge/via/vt8237r/vt8237r_usb.c +++ b/src/southbridge/via/vt8237r/vt8237r_usb.c @@ -34,16 +34,16 @@ static void usb_i_init(struct device *dev) #if CONFIG_EPIA_VT8237R_INIT u8 reg8; - printk_debug("Entering %s\n", __func__); + printk(BIOS_DEBUG, "Entering %s\n", __func__); - printk_spew("%s Read %02X from PCI Command Reg\n", dev_path(dev), reg8); + printk(BIOS_SPEW, "%s Read %02X from PCI Command Reg\n", dev_path(dev), reg8); reg8 = pci_read_config8(dev, 0x04); reg8 = reg8 | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_write_config8(dev, 0x04, reg8); - printk_spew("%s Wrote %02X to PCI Command Reg\n", dev_path(dev), reg8); + printk(BIOS_SPEW, "%s Wrote %02X to PCI Command Reg\n", dev_path(dev), reg8); /* Set Cache Line Size and Latency Timer */ pci_write_config8(dev, 0x0c, 0x08); @@ -74,7 +74,7 @@ static void vt8237_usb_i_read_resources(struct device *dev) struct resource *res; u8 function = (u8) dev->path.pci.devfn & 0x7; - printk_spew("VT8237R Fixing USB 1.1 fn %d I/O resource = 0x%04X\n", function, usb_io_addr[function]); + printk(BIOS_SPEW, "VT8237R Fixing USB 1.1 fn %d I/O resource = 0x%04X\n", function, usb_io_addr[function]); /* Fix the I/O Resources of the USB1.1 Interfaces */ /* Auto PCI probe seems to size the resources */ @@ -98,7 +98,7 @@ static void usb_ii_init(struct device *dev) #if CONFIG_EPIA_VT8237R_INIT u8 reg8; - printk_debug("Entering %s\n", __func__); + printk(BIOS_DEBUG, "Entering %s\n", __func__); /* Set memory Write and Invalidate */ reg8 = pci_read_config8(dev, 0x04); diff --git a/src/superio/ite/it8716f/superio.c b/src/superio/ite/it8716f/superio.c index 6744850740..e4ba7b4a55 100644 --- a/src/superio/ite/it8716f/superio.c +++ b/src/superio/ite/it8716f/superio.c @@ -72,13 +72,13 @@ static void init_ec(uint16_t base) /* Read out current value of FAN_CTL control register (0x14). */ value = pnp_read_index(base, 0x14); - printk_debug("FAN_CTL: reg = 0x%04x, read value = 0x%02x\r\n", + printk(BIOS_DEBUG, "FAN_CTL: reg = 0x%04x, read value = 0x%02x\r\n", base + 0x14, value); /* Set FAN_CTL control register (0x14) polarity to high, and activate fans 1, 2 and 3. */ pnp_write_index(base, 0x14, value | 0x87); - printk_debug("FAN_CTL: reg = 0x%04x, writing value = 0x%02x\r\n", + printk(BIOS_DEBUG, "FAN_CTL: reg = 0x%04x, writing value = 0x%02x\r\n", base + 0x14, value | 0x87); } #endif diff --git a/src/superio/renesas/m3885x/superio.c b/src/superio/renesas/m3885x/superio.c index 3a9a72c220..693135854d 100644 --- a/src/superio/renesas/m3885x/superio.c +++ b/src/superio/renesas/m3885x/superio.c @@ -39,7 +39,7 @@ static void m3885x_init(device_t dev) if (!dev->enabled) return; - printk_debug("Renesas M3885x: Initializing keyboard.\n"); + printk(BIOS_DEBUG, "Renesas M3885x: Initializing keyboard.\n"); set_kbc_ps2_mode(); pc_keyboard_init(&conf->keyboard); m3885_configure_multikey(); diff --git a/src/superio/smsc/lpc47b397/superio.c b/src/superio/smsc/lpc47b397/superio.c index 237a131246..29826aa860 100644 --- a/src/superio/smsc/lpc47b397/superio.c +++ b/src/superio/smsc/lpc47b397/superio.c @@ -106,7 +106,7 @@ static void lpc47b397_pnp_enable_resources(device_t dev) switch(dev->path.pnp.device) { case LPC47B397_HWM: - printk_debug("lpc47b397 SensorBus Register Access enabled\r\n"); + printk(BIOS_DEBUG, "lpc47b397 SensorBus Register Access enabled\r\n"); pnp_set_logical_device(dev); enable_hwm_smbus(dev); break; diff --git a/src/superio/smsc/lpc47n217/superio.c b/src/superio/smsc/lpc47n217/superio.c index b83fe6cf6d..4e6e6dcee9 100644 --- a/src/superio/smsc/lpc47n217/superio.c +++ b/src/superio/smsc/lpc47n217/superio.c @@ -180,7 +180,7 @@ static void lpc47n217_init(device_t dev) static void lpc47n217_pnp_set_resource(device_t dev, struct resource *resource) { if (!(resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("ERROR: %s %02x not allocated\n", + printk(BIOS_ERR, "ERROR: %s %02x not allocated\n", dev_path(dev), resource->index); return; } @@ -200,7 +200,7 @@ static void lpc47n217_pnp_set_resource(device_t dev, struct resource *resource) lpc47n217_pnp_set_irq(dev, resource->base); } else { - printk_err("ERROR: %s %02x unknown resource type\n", + printk(BIOS_ERR, "ERROR: %s %02x unknown resource type\n", dev_path(dev), resource->index); return; } diff --git a/src/superio/smsc/lpc47n227/superio.c b/src/superio/smsc/lpc47n227/superio.c index 50b11c1c90..8dfb774b12 100644 --- a/src/superio/smsc/lpc47n227/superio.c +++ b/src/superio/smsc/lpc47n227/superio.c @@ -163,7 +163,7 @@ static void lpc47n227_init(device_t dev) break; case LPC47N227_KBDC: - printk_debug("LPC47N227: Initializing keyboard.\n"); + printk(BIOS_DEBUG, "LPC47N227: Initializing keyboard.\n"); pc_keyboard_init(&conf->keyboard); break; } @@ -176,7 +176,7 @@ static void lpc47n227_init(device_t dev) static void lpc47n227_pnp_set_resource(device_t dev, struct resource *resource) { if (!(resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("ERROR: %s %02lx not allocated\n", + printk(BIOS_ERR, "ERROR: %s %02lx not allocated\n", dev_path(dev), resource->index); return; } @@ -192,7 +192,7 @@ static void lpc47n227_pnp_set_resource(device_t dev, struct resource *resource) } else if (resource->flags & IORESOURCE_IRQ) { lpc47n227_pnp_set_irq(dev, resource->base); } else { - printk_err("ERROR: %s %02lx unknown resource type\n", + printk(BIOS_ERR, "ERROR: %s %02lx unknown resource type\n", dev_path(dev), resource->index); return; } diff --git a/src/superio/smsc/smscsuperio/superio.c b/src/superio/smsc/smscsuperio/superio.c index b86cd8649e..0fa2c36d76 100644 --- a/src/superio/smsc/smscsuperio/superio.c +++ b/src/superio/smsc/smscsuperio/superio.c @@ -304,7 +304,7 @@ static void enable_dev(device_t dev) /* TODO: Error handling? */ - printk_info("Found SMSC Super I/O (ID=0x%02x, rev=0x%02x)\n", + printk(BIOS_INFO, "Found SMSC Super I/O (ID=0x%02x, rev=0x%02x)\n", superio_id, superio_rev); first_time = 0; diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c index ae5624055a..46e9689800 100644 --- a/src/superio/via/vt1211/vt1211.c +++ b/src/superio/via/vt1211/vt1211.c @@ -113,13 +113,13 @@ static void vt1211_init(struct device *dev) init_hwm(res0->base); break; default: - printk_info("vt1211 asked to initialise unknown device!\n"); + printk(BIOS_INFO, "vt1211 asked to initialise unknown device!\n"); } } void vt1211_pnp_enable_resources(device_t dev) { - printk_debug("%s - enabling\n",dev_path(dev)); + printk(BIOS_DEBUG, "%s - enabling\n",dev_path(dev)); pnp_enter_ext_func_mode(dev); pnp_enable_resources(dev); pnp_exit_ext_func_mode(dev); @@ -148,7 +148,7 @@ void vt1211_pnp_set_resources(struct device *dev) for(i = 0; i < dev->resources; i++) { resource = &dev->resource[i]; if (!(resource->flags & IORESOURCE_ASSIGNED)) { - printk_err("ERROR: %s %02x %s size: 0x%010Lx not assigned\n", + printk(BIOS_ERR, "ERROR: %s %02x %s size: 0x%010Lx not assigned\n", dev_path(dev), dev->resource->index, resource_type(resource), resource->size); @@ -166,7 +166,7 @@ void vt1211_pnp_set_resources(struct device *dev) pnp_set_irq(dev, resource->index, resource->base); } else { - printk_err("ERROR: %s %02x unknown resource type\n", + printk(BIOS_ERR, "ERROR: %s %02x unknown resource type\n", dev_path(dev), resource->index); return; } @@ -206,7 +206,7 @@ static struct pnp_info pnp_dev_info[] = { static void enable_dev(struct device *dev) { - printk_debug("vt1211 enabling PNP devices.\n"); + printk(BIOS_DEBUG, "vt1211 enabling PNP devices.\n"); pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), diff --git a/src/superio/winbond/w83627ehg/superio.c b/src/superio/winbond/w83627ehg/superio.c index 393ea7086a..8deae4a683 100644 --- a/src/superio/winbond/w83627ehg/superio.c +++ b/src/superio/winbond/w83627ehg/superio.c @@ -100,7 +100,7 @@ static void init_hwm(unsigned long base) value = pnp_read_index(base, reg); value &= 0xff & (~(hwm_reg_values[i + 1])); value |= 0xff & hwm_reg_values[i + 2]; - /* printk_debug("base = 0x%04x, reg = 0x%02x, value = 0x%02x\r\n", base, reg,value); */ + /* printk(BIOS_DEBUG, "base = 0x%04x, reg = 0x%02x, value = 0x%02x\r\n", base, reg,value); */ pnp_write_index(base, reg, value); } } @@ -152,7 +152,7 @@ static void w83627ehg_pnp_enable_resources(device_t dev) switch (dev->path.pnp.device) { case W83627EHG_HWM: - printk_debug("w83627ehg hwm smbus enabled\n"); + printk(BIOS_DEBUG, "w83627ehg hwm smbus enabled\n"); enable_hwm_smbus(dev); break; } diff --git a/src/superio/winbond/w83627hf/superio.c b/src/superio/winbond/w83627hf/superio.c index 20f7a207cf..7c470ae8a2 100644 --- a/src/superio/winbond/w83627hf/superio.c +++ b/src/superio/winbond/w83627hf/superio.c @@ -120,7 +120,7 @@ static void init_hwm(unsigned long base) value &= 0xff & hwm_reg_values[i+1]; value |= 0xff & hwm_reg_values[i+2]; #if 0 - printk_debug("base = 0x%04x, reg = 0x%02x, value = 0x%02x\r\n", base, reg,value); + printk(BIOS_DEBUG, "base = 0x%04x, reg = 0x%02x, value = 0x%02x\r\n", base, reg,value); #endif pnp_write_index(base, reg, value); } @@ -172,7 +172,7 @@ static void w83627hf_pnp_enable_resources(device_t dev) pnp_enable_resources(dev); switch(dev->path.pnp.device) { case W83627HF_HWM: - printk_debug("w83627hf hwm smbus enabled\n"); + printk(BIOS_DEBUG, "w83627hf hwm smbus enabled\n"); enable_hwm_smbus(dev); break; } diff --git a/util/mptable/mptable.c b/util/mptable/mptable.c index 6d5c565170..b253b75248 100644 --- a/util/mptable/mptable.c +++ b/util/mptable/mptable.c @@ -304,7 +304,7 @@ char *preamble[] = { "#include <string.h>", "#include <stdint.h>", "", -"void *smp_write_config_table(void *v)", +"static void *smp_write_config_table(void *v)", "{", " static const char sig[4] = \"PCMP\";", " static const char oem[8] = \"LNXI \";", @@ -340,7 +340,7 @@ char *postamble[] = { " /* Compute the checksums */", " mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);", " mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);", -" printk_debug(\"Wrote the mp table end at: %p - %p\\n\",", +" printk(BIOS_DEBUG, \"Wrote the mp table end at: %p - %p\\n\",", " mc, smp_next_mpe_entry(mc));", " return smp_next_mpe_entry(mc);", "}", |