mainboard/msi/ms9185/resourcemap.c: Use tabs for indents

Change-Id: I30b5830442da65ae3ddd35e8bca67795c34e9020
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16737
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

1 files changed, 250 insertions, 250 deletions

diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c
index 87853c79be..533f31a49a 100644
--- a/src/mainboard/msi/ms9185/resourcemap.c
+++ b/src/mainboard/msi/ms9185/resourcemap.c
@@ -27,260 +27,260 @@
 
 static void setup_ms9185_resource_map(void)
 {
-       static const unsigned int register_values[] = {
-               /* Careful set limit registers before base registers which contain the enables */
-               /* DRAM Limit i Registers
-                * F1:0x44 i = 0
-                * F1:0x4C i = 1
-                * F1:0x54 i = 2
-                * F1:0x5C i = 3
-                * F1:0x64 i = 4
-                * F1:0x6C i = 5
-                * F1:0x74 i = 6
-                * F1:0x7C i = 7
-                * [ 2: 0] Destination Node ID
-                *         000 = Node 0
-                *         001 = Node 1
-                *         010 = Node 2
-                *         011 = Node 3
-                *         100 = Node 4
-                *         101 = Node 5
-                *         110 = Node 6
-                *         111 = Node 7
-                * [ 7: 3] Reserved
-                * [10: 8] Interleave select
-                *         specifies the values of A[14:12] to use with interleave enable.
-                * [15:11] Reserved
-                * [31:16] DRAM Limit Address i Bits 39-24
-                *         This field defines the upper address bits of a 40 bit  address
-                *         that define the end of the DRAM region.
-                */
-               PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-               PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-               PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-               PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-               PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-               PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-               PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-               /* DRAM Base i Registers
-                * F1:0x40 i = 0
-                * F1:0x48 i = 1
-                * F1:0x50 i = 2
-                * F1:0x58 i = 3
-                * F1:0x60 i = 4
-                * F1:0x68 i = 5
-                * F1:0x70 i = 6
-                * F1:0x78 i = 7
-                * [ 0: 0] Read Enable
-                *         0 = Reads Disabled
-                *         1 = Reads Enabled
-                * [ 1: 1] Write Enable
-                *         0 = Writes Disabled
-                *         1 = Writes Enabled
-                * [ 7: 2] Reserved
-                * [10: 8] Interleave Enable
-                *         000 = No interleave
-                *         001 = Interleave on A[12] (2 nodes)
-                *         010 = reserved
-                *         011 = Interleave on A[12] and A[14] (4 nodes)
-                *         100 = reserved
-                *         101 = reserved
-                *         110 = reserved
-                *         111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-                * [15:11] Reserved
-                * [13:16] DRAM Base Address i Bits 39-24
-                *         This field defines the upper address bits of a 40-bit address
-                *         that define the start of the DRAM region.
-                */
-               PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+	static const unsigned int register_values[] = {
+		/* Careful set limit registers before base registers which contain the enables */
+		/* DRAM Limit i Registers
+		 * F1:0x44 i = 0
+		 * F1:0x4C i = 1
+		 * F1:0x54 i = 2
+		 * F1:0x5C i = 3
+		 * F1:0x64 i = 4
+		 * F1:0x6C i = 5
+		 * F1:0x74 i = 6
+		 * F1:0x7C i = 7
+		 * [ 2: 0] Destination Node ID
+		 *         000 = Node 0
+		 *         001 = Node 1
+		 *         010 = Node 2
+		 *         011 = Node 3
+		 *         100 = Node 4
+		 *         101 = Node 5
+		 *         110 = Node 6
+		 *         111 = Node 7
+		 * [ 7: 3] Reserved
+		 * [10: 8] Interleave select
+		 *         specifies the values of A[14:12] to use with interleave enable.
+		 * [15:11] Reserved
+		 * [31:16] DRAM Limit Address i Bits 39-24
+		 *         This field defines the upper address bits of a 40 bit  address
+		 *         that define the end of the DRAM region.
+		 */
+		PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+		PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+		PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+		PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+		PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+		PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+		PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+		/* DRAM Base i Registers
+		 * F1:0x40 i = 0
+		 * F1:0x48 i = 1
+		 * F1:0x50 i = 2
+		 * F1:0x58 i = 3
+		 * F1:0x60 i = 4
+		 * F1:0x68 i = 5
+		 * F1:0x70 i = 6
+		 * F1:0x78 i = 7
+		 * [ 0: 0] Read Enable
+		 *         0 = Reads Disabled
+		 *         1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *         0 = Writes Disabled
+		 *         1 = Writes Enabled
+		 * [ 7: 2] Reserved
+		 * [10: 8] Interleave Enable
+		 *         000 = No interleave
+		 *         001 = Interleave on A[12] (2 nodes)
+		 *         010 = reserved
+		 *         011 = Interleave on A[12] and A[14] (4 nodes)
+		 *         100 = reserved
+		 *         101 = reserved
+		 *         110 = reserved
+		 *         111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+		 * [15:11] Reserved
+		 * [13:16] DRAM Base Address i Bits 39-24
+		 *         This field defines the upper address bits of a 40-bit address
+		 *         that define the start of the DRAM region.
+		 */
+		PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
 
-               /* Memory-Mapped I/O Limit i Registers
-                * F1:0x84 i = 0
-                * F1:0x8C i = 1
-                * F1:0x94 i = 2
-                * F1:0x9C i = 3
-                * F1:0xA4 i = 4
-                * F1:0xAC i = 5
-                * F1:0xB4 i = 6
-                * F1:0xBC i = 7
-                * [ 2: 0] Destination Node ID
-                *         000 = Node 0
-                *         001 = Node 1
-                *         010 = Node 2
-                *         011 = Node 3
-                *         100 = Node 4
-                *         101 = Node 5
-                *         110 = Node 6
-                *         111 = Node 7
-                * [ 3: 3] Reserved
-                * [ 5: 4] Destination Link ID
-                *         00 = Link 0
-                *         01 = Link 1
-                *         10 = Link 2
-                *         11 = Reserved
-                * [ 6: 6] Reserved
-                * [ 7: 7] Non-Posted
-                *         0 = CPU writes may be posted
-                *         1 = CPU writes must be non-posted
-                * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-                *         This field defines the upp adddress bits of a 40-bit address that
-                *         defines the end of a memory-mapped I/O region n
-                */
-               PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
+		/* Memory-Mapped I/O Limit i Registers
+		 * F1:0x84 i = 0
+		 * F1:0x8C i = 1
+		 * F1:0x94 i = 2
+		 * F1:0x9C i = 3
+		 * F1:0xA4 i = 4
+		 * F1:0xAC i = 5
+		 * F1:0xB4 i = 6
+		 * F1:0xBC i = 7
+		 * [ 2: 0] Destination Node ID
+		 *         000 = Node 0
+		 *         001 = Node 1
+		 *         010 = Node 2
+		 *         011 = Node 3
+		 *         100 = Node 4
+		 *         101 = Node 5
+		 *         110 = Node 6
+		 *         111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *         00 = Link 0
+		 *         01 = Link 1
+		 *         10 = Link 2
+		 *         11 = Reserved
+		 * [ 6: 6] Reserved
+		 * [ 7: 7] Non-Posted
+		 *         0 = CPU writes may be posted
+		 *         1 = CPU writes must be non-posted
+		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+		 *         This field defines the upp adddress bits of a 40-bit address that
+		 *         defines the end of a memory-mapped I/O region n
+		 */
+		PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
 
-               /* Memory-Mapped I/O Base i Registers
-                * F1:0x80 i = 0
-                * F1:0x88 i = 1
-                * F1:0x90 i = 2
-                * F1:0x98 i = 3
-                * F1:0xA0 i = 4
-                * F1:0xA8 i = 5
-                * F1:0xB0 i = 6
-                * F1:0xB8 i = 7
-                * [ 0: 0] Read Enable
-                *         0 = Reads disabled
-                *         1 = Reads Enabled
-                * [ 1: 1] Write Enable
-                *         0 = Writes disabled
-                *         1 = Writes Enabled
-                * [ 2: 2] Cpu Disable
-                *         0 = Cpu can use this I/O range
-                *         1 = Cpu requests do not use this I/O range
-                * [ 3: 3] Lock
-                *         0 = base/limit registers i are read/write
-                *         1 = base/limit registers i are read-only
-                * [ 7: 4] Reserved
-                * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-                *         This field defines the upper address bits of a 40bit address
-                *         that defines the start of memory-mapped I/O region i
-                */
-               PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+		/* Memory-Mapped I/O Base i Registers
+		 * F1:0x80 i = 0
+		 * F1:0x88 i = 1
+		 * F1:0x90 i = 2
+		 * F1:0x98 i = 3
+		 * F1:0xA0 i = 4
+		 * F1:0xA8 i = 5
+		 * F1:0xB0 i = 6
+		 * F1:0xB8 i = 7
+		 * [ 0: 0] Read Enable
+		 *         0 = Reads disabled
+		 *         1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *         0 = Writes disabled
+		 *         1 = Writes Enabled
+		 * [ 2: 2] Cpu Disable
+		 *         0 = Cpu can use this I/O range
+		 *         1 = Cpu requests do not use this I/O range
+		 * [ 3: 3] Lock
+		 *         0 = base/limit registers i are read/write
+		 *         1 = base/limit registers i are read-only
+		 * [ 7: 4] Reserved
+		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+		 *         This field defines the upper address bits of a 40bit address
+		 *         that defines the start of memory-mapped I/O region i
+		 */
+		PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
 
-               /* PCI I/O Limit i Registers
-                * F1:0xC4 i = 0
-                * F1:0xCC i = 1
-                * F1:0xD4 i = 2
-                * F1:0xDC i = 3
-                * [ 2: 0] Destination Node ID
-                *         000 = Node 0
-                *         001 = Node 1
-                *         010 = Node 2
-                *         011 = Node 3
-                *         100 = Node 4
-                *         101 = Node 5
-                *         110 = Node 6
-                *         111 = Node 7
-                * [ 3: 3] Reserved
-                * [ 5: 4] Destination Link ID
-                *         00 = Link 0
-                *         01 = Link 1
-                *         10 = Link 2
-                *         11 = reserved
-                * [11: 6] Reserved
-                * [24:12] PCI I/O Limit Address i
-                *         This field defines the end of PCI I/O region n
-                * [31:25] Reserved
-                */
-               PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
-               PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+		/* PCI I/O Limit i Registers
+		 * F1:0xC4 i = 0
+		 * F1:0xCC i = 1
+		 * F1:0xD4 i = 2
+		 * F1:0xDC i = 3
+		 * [ 2: 0] Destination Node ID
+		 *         000 = Node 0
+		 *         001 = Node 1
+		 *         010 = Node 2
+		 *         011 = Node 3
+		 *         100 = Node 4
+		 *         101 = Node 5
+		 *         110 = Node 6
+		 *         111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *         00 = Link 0
+		 *         01 = Link 1
+		 *         10 = Link 2
+		 *         11 = reserved
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Limit Address i
+		 *         This field defines the end of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
+		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
 
-               /* PCI I/O Base i Registers
-                * F1:0xC0 i = 0
-                * F1:0xC8 i = 1
-                * F1:0xD0 i = 2
-                * F1:0xD8 i = 3
-                * [ 0: 0] Read Enable
-                *         0 = Reads Disabled
-                *         1 = Reads Enabled
-                * [ 1: 1] Write Enable
-                *         0 = Writes Disabled
-                *         1 = Writes Enabled
-                * [ 3: 2] Reserved
-                * [ 4: 4] VGA Enable
-                *         0 = VGA matches Disabled
-                *         1 = matches all address < 64K and where A[9:0] is in the
-                *             range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-                * [ 5: 5] ISA Enable
-                *         0 = ISA matches Disabled
-                *         1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-                *             from matching agains this base/limit pair
-                * [11: 6] Reserved
-                * [24:12] PCI I/O Base i
-                *         This field defines the start of PCI I/O region n
-                * [31:25] Reserved
-                */
-               PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
-               PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+		/* PCI I/O Base i Registers
+		 * F1:0xC0 i = 0
+		 * F1:0xC8 i = 1
+		 * F1:0xD0 i = 2
+		 * F1:0xD8 i = 3
+		 * [ 0: 0] Read Enable
+		 *         0 = Reads Disabled
+		 *         1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *         0 = Writes Disabled
+		 *         1 = Writes Enabled
+		 * [ 3: 2] Reserved
+		 * [ 4: 4] VGA Enable
+		 *         0 = VGA matches Disabled
+		 *         1 = matches all address < 64K and where A[9:0] is in the
+		 *             range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+		 * [ 5: 5] ISA Enable
+		 *         0 = ISA matches Disabled
+		 *         1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+		 *             from matching agains this base/limit pair
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Base i
+		 *         This field defines the start of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+		PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+		PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
 
-               /* Config Base and Limit i Registers
-                * F1:0xE0 i = 0
-                * F1:0xE4 i = 1
-                * F1:0xE8 i = 2
-                * F1:0xEC i = 3
-                * [ 0: 0] Read Enable
-                *         0 = Reads Disabled
-                *         1 = Reads Enabled
-                * [ 1: 1] Write Enable
-                *         0 = Writes Disabled
-                *         1 = Writes Enabled
-                * [ 2: 2] Device Number Compare Enable
-                *         0 = The ranges are based on bus number
-                *         1 = The ranges are ranges of devices on bus 0
-                * [ 3: 3] Reserved
-                * [ 6: 4] Destination Node
-                *         000 = Node 0
-                *         001 = Node 1
-                *         010 = Node 2
-                *         011 = Node 3
-                *         100 = Node 4
-                *         101 = Node 5
-                *         110 = Node 6
-                *         111 = Node 7
-                * [ 7: 7] Reserved
-                * [ 9: 8] Destination Link
-                *         00 = Link 0
-                *         01 = Link 1
-                *         10 = Link 2
-                *         11 - Reserved
-                * [15:10] Reserved
-                * [23:16] Bus Number Base i
-                *         This field defines the lowest bus number in configuration region i
-                * [31:24] Bus Number Limit i
-                *         This field defines the highest bus number in configuration regin i
-                */
-               PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203,
-               PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
-               PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-       };
+		/* Config Base and Limit i Registers
+		 * F1:0xE0 i = 0
+		 * F1:0xE4 i = 1
+		 * F1:0xE8 i = 2
+		 * F1:0xEC i = 3
+		 * [ 0: 0] Read Enable
+		 *         0 = Reads Disabled
+		 *         1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *         0 = Writes Disabled
+		 *         1 = Writes Enabled
+		 * [ 2: 2] Device Number Compare Enable
+		 *         0 = The ranges are based on bus number
+		 *         1 = The ranges are ranges of devices on bus 0
+		 * [ 3: 3] Reserved
+		 * [ 6: 4] Destination Node
+		 *         000 = Node 0
+		 *         001 = Node 1
+		 *         010 = Node 2
+		 *         011 = Node 3
+		 *         100 = Node 4
+		 *         101 = Node 5
+		 *         110 = Node 6
+		 *         111 = Node 7
+		 * [ 7: 7] Reserved
+		 * [ 9: 8] Destination Link
+		 *         00 = Link 0
+		 *         01 = Link 1
+		 *         10 = Link 2
+		 *         11 - Reserved
+		 * [15:10] Reserved
+		 * [23:16] Bus Number Base i
+		 *         This field defines the lowest bus number in configuration region i
+		 * [31:24] Bus Number Limit i
+		 *         This field defines the highest bus number in configuration regin i
+		 */
+		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203,
+		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+	};
 
-       int max;
-       max = ARRAY_SIZE(register_values);
-       setup_resource_map(register_values, max);
+	int max;
+	max = ARRAY_SIZE(register_values);
+	setup_resource_map(register_values, max);
 }