veyron_pinky: Add rev2 support, clean up mainboard.c

This patch adds support for the board changes in rev2 (board_id = 0001).
It also moves the existing mainboard.c code around a bit to group it by
component.

BUG=chrome-os-partner:32139
TEST=Booted on rev1. Confirmed SD card still works. Confirmed power
button was still as broken as before.

Original-Change-Id: Ifc4876687db64ca50e41d009d911446129d57b1b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220251

(cherry picked from commit 9428e0d1b784b27790b3b3dbbb18a769e51c6fd3)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>

Change-Id: I8d3479aa314f8c6f1591c1b69b0a3827234fc730
Reviewed-on: http://review.coreboot.org/9237
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

7 files changed, 121 insertions, 65 deletions

diff --git a/src/mainboard/google/veyron_pinky/Makefile.inc b/src/mainboard/google/veyron_pinky/Makefile.inc
index 63fefe477e..c33cfa3166 100644
--- a/src/mainboard/google/veyron_pinky/Makefile.inc
+++ b/src/mainboard/google/veyron_pinky/Makefile.inc
@@ -17,12 +17,15 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 ##
 bootblock-y += bootblock.c
+bootblock-y += boardid.c
 bootblock-y += chromeos.c
 bootblock-y += reset.c
 
+verstage-y += boardid.c
 verstage-y += chromeos.c
 verstage-y += reset.c
 
+romstage-y += boardid.c
 romstage-y += romstage.c
 romstage-y += chromeos.c
 romstage-y += sdram_configs.c
diff --git a/src/mainboard/google/veyron_pinky/board.h b/src/mainboard/google/veyron_pinky/board.h
new file mode 100644
index 0000000000..2ffa9cf996
--- /dev/null
+++ b/src/mainboard/google/veyron_pinky/board.h
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2014 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __MAINBOARD_GOOGLE_VEYRON_PINKY_BOARD_H
+#define __MAINBOARD_GOOGLE_VEYRON_PINKY_BOARD_H
+
+#include <boardid.h>
+#include <soc/rockchip/rk3288/gpio.h>
+
+#define PMIC_BUS 0
+
+#define GPIO_RESET	(board_id() > 0 ? GPIO(0, B, 5) : GPIO(0, B, 2))
+
+/* TODO: move setup_chromeos_gpios() here once bootblock code is in mainboard */
+
+#endif	/* __MAINBOARD_GOOGLE_VEYRON_PINKY_BOARD_H */
diff --git a/src/mainboard/google/veyron_pinky/chromeos.c b/src/mainboard/google/veyron_pinky/chromeos.c
index 50dc4947dc..827b004394 100644
--- a/src/mainboard/google/veyron_pinky/chromeos.c
+++ b/src/mainboard/google/veyron_pinky/chromeos.c
@@ -25,8 +25,10 @@
 #include <vendorcode/google/chromeos/chromeos.h>
 #include <soc/rockchip/rk3288/gpio.h>
 
+#include "board.h"
+
 #define GPIO_WP		GPIO(7, A, 6)
-#define GPIO_LID	GPIO(7, B, 5)
+#define GPIO_LID	(board_id() > 0 ? GPIO(0, A, 6) : GPIO(7, B, 5))
 #define GPIO_POWER	GPIO(0, A, 5)
 #define GPIO_RECOVERY	GPIO(0, B, 1)
 
@@ -34,7 +36,7 @@ void setup_chromeos_gpios(void)
 {
 	gpio_input(GPIO_WP);
 	gpio_input_pullup(GPIO_LID);
-	gpio_input_pullup(GPIO_POWER);
+	gpio_input(GPIO_POWER);
 	gpio_input_pullup(GPIO_RECOVERY);
 }
 
diff --git a/src/mainboard/google/veyron_pinky/mainboard.c b/src/mainboard/google/veyron_pinky/mainboard.c
index 0bbd496c64..22c9b0e0f3 100644
--- a/src/mainboard/google/veyron_pinky/mainboard.c
+++ b/src/mainboard/google/veyron_pinky/mainboard.c
@@ -32,97 +32,106 @@
 #include <soc/rockchip/rk3288/rk808.h>
 #include <soc/rockchip/rk3288/spi.h>
 
-#define DRAM_START	(CONFIG_SYS_SDRAM_BASE >> 20)
-#define DRAM_SIZE	CONFIG_DRAM_SIZE_MB
-#define DRAM_END	(DRAM_START + DRAM_SIZE)
+#include "board.h"
 
-static void setup_gpio(void)
+static void configure_usb(void)
 {
-	/*SOC and TPM reset GPIO, active high.*/
-	gpio_output(GPIO(0, B, 2), 0);
+	gpio_output(GPIO(0, B, 3), 1);			/* HOST1_PWR_EN */
+	gpio_output(GPIO(0, B, 4), 1);			/* USBOTG_PWREN_H */
+
+	switch (board_id()) {
+	case 0:
+		gpio_output(GPIO(7, B, 3), 1);		/* 5V_DRV */
+		break;
+	default:
+		break;	/* 5V_DRV moved to EC after rev1 */
+	}
+}
 
-	/* Configure GPIO for lcd_bl_en */
-	gpio_output(GPIO(7, A, 2), 1);
+static void configure_sdmmc(void)
+{
+	writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
 
-	/*Configure backlight PWM 100% brightness*/
-	gpio_output(GPIO(7, A, 0), 0);
+	/* use sdmmc0 io, disable JTAG function */
+	writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
 
-	/* Configure GPIO for lcd_en */
-	gpio_output(GPIO(7, B, 7), 1);
+	switch (board_id()) {
+	case 0:
+		rk808_configure_ldo(PMIC_BUS, 8, 3300);	/* VCCIO_SD */
+		gpio_output(GPIO(7, C, 5), 1);		/* SD_EN */
+		break;
+	default:
+		rk808_configure_ldo(PMIC_BUS, 4, 3300); /* VCCIO_SD */
+		rk808_configure_ldo(PMIC_BUS, 5, 3300); /* VCC33_SD */
+		break;
+	}
+
+	gpio_input(GPIO(7, A, 5));		/* SD_DET */
 }
 
-static void setup_iomux(void)
+static void configure_emmc(void)
 {
-	/*i2c0 for pmic*/
-	setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL);
-	setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
-
-	/*i2c2 for codec*/
-	writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2);
-
-	writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
-	writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
-	writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
-	writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
 	writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
 	writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
 	writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
-}
-
-static void setup_usb_poweron(void)
-{
-	/* Configure GPIO for usb1_pwr_en */
-	gpio_output(GPIO(0, B, 3), 1);
 
-	/* Configure GPIO for usb2_pwr_en */
-	gpio_output(GPIO(0, B, 4), 1);
-
-	/* Configure GPIO for 5v_drv */
-	gpio_output(GPIO(7, B, 3), 1);
+	gpio_output(GPIO(7, B, 4), 1);			/* EMMC_RST_L */
 }
 
-static void configure_sdmmc(void)
+static void configure_codec(void)
 {
-	/* Configure GPIO for sd_en */
-	gpio_output(GPIO(7, C, 5), 1);
+	writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2);	/* CODEC I2C */
 
-	/* Configure GPIO for sd_detec */
-	gpio_input_pullup(GPIO(7, A, 5));
+	writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
+	writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
 
-	/*use sdmmc0 io, disable JTAG function*/
-	writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
-}
+	switch (board_id()) {
+	case 0:
+		rk808_configure_ldo(PMIC_BUS, 5, 1800);	/* VCC18_CODEC */
+		break;
+	default:
+		rk808_configure_ldo(PMIC_BUS, 6, 1800);	/* VCC18_CODEC */
+		break;
+	}
 
-static void configure_emmc(void)
-{
-	/* Configure GPIO for emmc_pwrctrl */
-	gpio_output(GPIO(7, B, 4), 1);
-}
-
-static void configure_i2s(void)
-{
-	/*AUDIO IO domain 1.8V voltage selection*/
+	/* AUDIO IO domain 1.8V voltage selection */
 	writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
 	rkclk_configure_i2s(12288000);
 }
 
-static void pmic_init(unsigned int bus)
+static void configure_lcd(void)
 {
-	rk808_configure_ldo(bus, 4, 1800);	/* VCC18_LCD */
-	rk808_configure_ldo(bus, 5, 1800);	/* VCC18_CODEC */
-	rk808_configure_ldo(bus, 6, 1000);	/* VCC10_LCD */
-	rk808_configure_ldo(bus, 8, 3300);	/* VCCIO_SD */
+	writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+
+	switch (board_id()) {
+	case 0:
+		rk808_configure_ldo(PMIC_BUS, 4, 1800);	/* VCC18_LCD */
+		rk808_configure_ldo(PMIC_BUS, 6, 1000);	/* VCC10_LCD */
+		gpio_output(GPIO(7, B, 7), 1);		/* LCD_EN */
+		break;
+	default:
+		rk808_configure_switch(PMIC_BUS, 2, 1);	/* VCC18_LCD */
+		rk808_configure_ldo(PMIC_BUS, 7, 3300); /* VCC10_LCD_PWREN_H */
+		rk808_configure_switch(PMIC_BUS, 1, 1);	/* VCC33_LCD */
+		break;
+	}
+
+	gpio_output(GPIO(7, A, 0), 0);			/* LCDC_BL */
+	gpio_output(GPIO(7, A, 2), 1);			/* BL_EN */
 }
 
 static void mainboard_init(device_t dev)
 {
-	setup_iomux();
-	pmic_init(0);
-	setup_gpio();
-	setup_usb_poweron();
+	setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL); /* PMIC I2C */
+	setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA); /* PMIC I2C */
+
+	gpio_output(GPIO_RESET, 0);
+
+	configure_usb();
 	configure_sdmmc();
 	configure_emmc();
-	configure_i2s();
+	configure_codec();
+	configure_lcd();
 }
 
 static void mainboard_enable(device_t dev)
diff --git a/src/mainboard/google/veyron_pinky/reset.c b/src/mainboard/google/veyron_pinky/reset.c
index d769665a9e..45c28b286f 100644
--- a/src/mainboard/google/veyron_pinky/reset.c
+++ b/src/mainboard/google/veyron_pinky/reset.c
@@ -21,8 +21,10 @@
 #include <soc/rockchip/rk3288/gpio.h>
 #include <reset.h>
 
+#include "board.h"
+
 void hard_reset(void)
 {
-	gpio_output(GPIO(0, B, 2), 1);
+	gpio_output(GPIO_RESET, 1);
 	while (1);
 }
diff --git a/src/soc/rockchip/rk3288/rk808.c b/src/soc/rockchip/rk3288/rk808.c
index 0d629ca041..50df96d591 100644
--- a/src/soc/rockchip/rk3288/rk808.c
+++ b/src/soc/rockchip/rk3288/rk808.c
@@ -26,6 +26,7 @@
 
 #define RK808_ADDR	0x1b
 
+#define DCDC_EN		0x23
 #define LDO_EN		0x24
 #define LDO_ONSEL(i)	(0x39 + 2 * i)
 #define LDO_SLPSEL(i)	(0x3a + 2 * i)
@@ -39,6 +40,12 @@ static void rk808_clrsetbits(uint8_t bus, uint8_t reg, uint8_t clr, uint8_t set)
 		printk(BIOS_ERR, "ERROR: Cannot set Rk808[%#x]!\n", reg);
 }
 
+void rk808_configure_switch(uint8_t bus, int sw, int enabled)
+{
+	assert(sw == 1 || sw == 2);
+	rk808_clrsetbits(bus, DCDC_EN, 1 << (sw + 4), !!enabled << (sw + 4));
+}
+
 void rk808_configure_ldo(uint8_t bus, int ldo, int millivolts)
 {
 	uint8_t vsel;
diff --git a/src/soc/rockchip/rk3288/rk808.h b/src/soc/rockchip/rk3288/rk808.h
index a6ba67c538..00520751b5 100644
--- a/src/soc/rockchip/rk3288/rk808.h
+++ b/src/soc/rockchip/rk3288/rk808.h
@@ -20,6 +20,7 @@
 #ifndef __SOC_ROCKCHIP_RK3288_PMIC_H__
 #define __SOC_ROCKCHIP_RK3288_PMIC_H__
 
+void rk808_configure_switch(uint8_t bus, int sw, int enabled);
 void rk808_configure_ldo(uint8_t bus, int ldo, int millivolts);
 
 #endif