Initial support for the Intel 82830 northbridge and RCA RM4100 board.

Signed-off-by: Joseph Smith <joe@smittys.pointclark.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3129 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

16 files changed, 1604 insertions, 0 deletions

diff --git a/src/mainboard/rca/rm4100/Config.lb b/src/mainboard/rca/rm4100/Config.lb
new file mode 100644
index 0000000000..ffe173095b
--- /dev/null
+++ b/src/mainboard/rca/rm4100/Config.lb
@@ -0,0 +1,145 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
+else
+	default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
+	default ROM_SECTION_OFFSET = 0
+end
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+default XIP_ROM_SIZE = 65536
+default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+arch i386 end
+driver mainboard.o
+if HAVE_PIRQ_TABLE object irq_tables.o end
+# object reset.o
+if HAVE_ACPI_TABLES
+	object fadt.o
+	object dsdt.o
+	object acpi_tables.o
+end
+makerule ./failover.E
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./failover.inc
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./auto.E
+	# depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	depends	"$(MAINBOARD)/auto.c ./romcc"
+	action	"./romcc -E -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc 
+	# depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	depends	"$(MAINBOARD)/auto.c ./romcc"
+	action	"./romcc    -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+mainboardinit arch/i386/lib/cpu_reset.inc
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds
+	mainboardinit ./failover.inc
+end
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i82830		# Northbridge
+  device pci_domain 0 on		# PCI domain
+    device pci 0.0 on end		# Host bridge
+    chip drivers/pci/onboard		# Onboard VGA
+      device pci 2.0 on end		# VGA (Intel 82830 CGC)
+      register "rom_address" = "0xfff00000"
+    end
+    chip southbridge/intel/i82801xx	# Southbridge
+      device pci 1d.0 on end		# USB UHCI Controller #1
+      device pci 1d.1 on end		# USB UHCI Controller #2
+      device pci 1d.2 on end		# USB UHCI Controller #3
+      device pci 1d.7 on end		# USB2 EHCI Controller
+      device pci 1e.0 on		# PCI bridge
+        device pci 08.0 on end		# Intel 82801DB PRO/100 VE Ethernet
+      end
+      device pci 1f.0 on		# ISA/LPC bridge
+        chip superio/smsc/smscsuperio	# Super I/O
+          device pnp 2e.0 off		# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 2e.3 on		# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+            drq 0x74 = 4
+          end
+          device pnp 2e.4 on		# Com1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 2e.5 on		# Com2 / IR
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 2e.7 on		# PS/2 keyboard/mouse
+            io 0x60 = 0x60
+            io 0x62 = 0x64
+            irq 0x70 = 1		# Keyboard interrupt
+            irq 0x72 = 12		# Mouse interrupt
+          end
+          device pnp 2e.9 off end	# Game port
+          device pnp 2e.a on		# PME
+            io 0x60 = 0x800
+          end
+          device pnp 2e.b off end	# MPU-401
+        end
+      end
+      device pci 1f.1 on end		# IDE
+      device pci 1f.3 on end		# SMBus
+      device pci 1f.5 on end		# AC'97 audio
+      device pci 1f.6 on end		# AC'97 modem
+    end
+  end
+  device apic_cluster 0 on		# APIC cluster
+    chip cpu/intel/socket_PGA370	# Mobile Celeron Micro-FCBGA Socket 479
+      device apic 0 on end		# APIC
+    end
+  end
+end
+
diff --git a/src/mainboard/rca/rm4100/Options.lb b/src/mainboard/rca/rm4100/Options.lb
new file mode 100644
index 0000000000..8bc784bf98
--- /dev/null
+++ b/src/mainboard/rca/rm4100/Options.lb
@@ -0,0 +1,95 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+uses CC
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_IOAPIC
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses CONFIG_UDELAY_TSC
+uses CONFIG_VIDEO_MB
+uses CROSS_COMPILE
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses FALLBACK_SIZE
+uses HAVE_ACPI_TABLES
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_OPTION_TABLE
+uses HAVE_PIRQ_TABLE
+uses HEAP_SIZE
+uses HOSTCC
+uses IRQ_SLOT_COUNT
+uses COREBOOT_EXTRA_VERSION
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses OBJCOPY
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SIZE
+uses STACK_SIZE
+uses TTYS0_BASE
+uses TTYS0_BAUD
+uses TTYS0_LCS
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
+default ROM_SIZE = 512 * 1024
+default ROM_IMAGE_SIZE = 128 * 1024
+default HAVE_FALLBACK_BOOT = 1
+default FALLBACK_SIZE = 512 * 1024
+default CONFIG_UDELAY_TSC = 1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
+default HAVE_PIRQ_TABLE = 1
+default IRQ_SLOT_COUNT = 10
+default HAVE_MP_TABLE = 0
+default HAVE_ACPI_TABLES = 0
+default CONFIG_IOAPIC = 0
+default HAVE_OPTION_TABLE = 0
+default CONFIG_CONSOLE_VGA = 0
+default CONFIG_PCI_ROM_RUN = 0
+default CONFIG_VIDEO_MB = 0
+default STACK_SIZE = 0x2000
+default HEAP_SIZE = 0x4000
+default _RAMBASE = 0x00004000
+default USE_OPTION_TABLE = 0
+default CONFIG_ROM_PAYLOAD = 1
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+default CONFIG_CONSOLE_SERIAL8250 = 1
+default TTYS0_BAUD = 115200
+default TTYS0_BASE = 0x3f8
+default TTYS0_LCS = 0x3	# 8n1
+default DEFAULT_CONSOLE_LOGLEVEL = 9
+default MAXIMUM_CONSOLE_LOGLEVEL = 9
+default MAINBOARD_VENDOR = "RCA"
+default MAINBOARD_PART_NUMBER = "RM4100"
+end
diff --git a/src/mainboard/rca/rm4100/auto.c b/src/mainboard/rca/rm4100/auto.c
new file mode 100644
index 0000000000..cff36d23fb
--- /dev/null
+++ b/src/mainboard/rca/rm4100/auto.c
@@ -0,0 +1,136 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "pc80/udelay_io.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
+#include "northbridge/intel/i82830/raminit.h"
+#include "southbridge/intel/i82801xx/i82801xx.h"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include "spd_table.h"
+#include "gpio.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
+
+#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c"
+
+/**
+ * The onboard 128MB PC133 memory does not have a SPD EEPROM so the
+ * values have to be set manually, the SO-DIMM socket is located in
+ * socket0 (0x50), and the onboard memory is located in socket1 (0x51).
+ */
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	int i;
+
+	if (device == 0x50) {
+		return smbus_read_byte(device, address);
+	} else if (device == 0x51) {
+		for (i = 0; i < ARRAY_SIZE(spd_table); i++) {
+			if (spd_table[i].address == address)
+				return spd_table[i].data;
+		}
+		return 0xFF; /* Return 0xFF when address is not found. */
+	} else {
+		return 0xFF; /* Return 0xFF on any failures. */
+	}
+}
+
+#include "northbridge/intel/i82830/raminit.c"
+#include "sdram/generic_sdram.c"
+
+/**
+ * We have to disable the TCO Timer system reboot feature
+ * or we get several reboots through out the boot processes.
+ */
+static void disable_tco_timer(void)
+{
+	device_t dev;
+	u8 reg8;
+
+	/* Set the LPC device statically. */
+	dev = PCI_DEV(0x0, 0x1f, 0x0);
+
+	/* Disable the TCO Timer system reboot feature. */
+	reg8 = pci_read_config8(dev, 0xd4);
+	reg8 |= (1 << 1);
+	pci_write_config8(dev, 0xd4, reg8);
+}
+
+/**
+ * The AC'97 Audio Controller I/O space registers are read only by default
+ * so we need to enable them by setting register 0x41 to 0x01.
+ */
+static void ac97_io_enable(void)
+{
+	device_t dev;
+
+	/* Set the ac97 audio device staticly. */
+	dev = PCI_DEV(0x0, 0x1f, 0x5);
+
+	/* Enable access to the IO space. */
+	pci_write_config8(dev, 0x41, 0x01);
+}
+
+static void main(unsigned long bist)
+{
+	static const struct mem_controller memctrl[] = {
+		{
+			.d0 = PCI_DEV(0, 0, 0),
+			.channel0 = {0x50, 0x51},
+		}
+	};
+
+	if (bist == 0)
+		early_mtrr_init();
+
+	enable_smbus();
+
+	smscsuperio_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	mb_gpio_init();
+	uart_init();
+	console_init();
+
+	/* Halt if there was a built in self test failure. */
+	report_bist_failure(bist);
+
+	sdram_set_registers(memctrl);
+	sdram_set_spd_registers(memctrl);
+	sdram_enable(0, memctrl);
+
+	/* Check RAM. */
+	/* ram_check(0, 640 * 1024); */
+	/* ram_check(130048 * 1024, 131072 * 1024); */
+
+	disable_tco_timer();
+	ac97_io_enable();
+}
diff --git a/src/mainboard/rca/rm4100/chip.h b/src/mainboard/rca/rm4100/chip.h
new file mode 100644
index 0000000000..c53f56e0ef
--- /dev/null
+++ b/src/mainboard/rca/rm4100/chip.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_rca_rm4100_ops;
+
+struct mainboard_rca_rm4100_config {
+	int nothing;
+};
diff --git a/src/mainboard/rca/rm4100/gpio.c b/src/mainboard/rca/rm4100/gpio.c
new file mode 100644
index 0000000000..20c934b4a9
--- /dev/null
+++ b/src/mainboard/rca/rm4100/gpio.c
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define PME_DEV			PNP_DEV(0x2e, 0x0a)
+#define PME_IO_BASE_ADDR	0x800      /* Runtime register base address */
+#define ICH_IO_BASE_ADDR	0x00000500 /* GPIO base address register */
+
+/* Early mainboard specific GPIO setup. */
+static void mb_gpio_init(void)
+{
+	device_t dev;
+	uint16_t port;
+	uint32_t set_gpio;
+
+	/* Southbridge GPIOs. */
+	/* Set the LPC device statically. */
+	dev = PCI_DEV(0x0, 0x1f, 0x0);
+
+	/* Set the value for GPIO base address register and enable GPIO. */
+	pci_write_config32(dev, GPIO_BASE_ICH0_5, (ICH_IO_BASE_ADDR | 1));
+	pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10);
+
+	/* Set GPIO25 to input and drive GPIO23 to high,
+	 * this enables the LAN controller. 
+	 */
+	udelay(10);
+	set_gpio = 0x0000ffff;
+	set_gpio |= 1 << 25;
+	outl(set_gpio, ICH_IO_BASE_ADDR + 0x04);
+
+	set_gpio = 0x1b3f0000;
+	set_gpio |= 1 << 23;
+	outl(set_gpio, ICH_IO_BASE_ADDR + 0x0c);
+
+	/* Super I/O GPIOs. */
+	dev = PME_DEV;
+	port = dev >> 8;
+
+	outb(0x55, port);		/* Enter the configuration state. */
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, PME_IO_BASE_ADDR);
+	pnp_set_enable(dev, 1);
+	outl(0x03, PME_IO_BASE_ADDR + 0x1e); /* Force Disk Change */
+	outl(0x02, PME_IO_BASE_ADDR + 0x1f); /* Floppy Data Rate */
+	outl(0x81, PME_IO_BASE_ADDR + 0x20); /* UART1 FIFO */
+	outl(0x00, PME_IO_BASE_ADDR + 0x21); /* UART2 FIFO */
+	outl(0x00, PME_IO_BASE_ADDR + 0x22); /* Device Disable */
+	outl(0x01, PME_IO_BASE_ADDR + 0x23); /* GP10 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x24); /* GP11 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x25); /* GP12 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x26); /* GP13 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x27); /* GP14 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x28); /* GP15 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x29); /* GP16 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x2a); /* GP17 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x2b); /* GP20 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x2c); /* GP21 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x2d); /* GP22 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x2f); /* GP24 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x30); /* GP25 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x31); /* GP26 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x32); /* GP27 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x33); /* GP30 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x34); /* GP31 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x35); /* GP32 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x36); /* GP33 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x37); /* GP34 */
+	outl(0x04, PME_IO_BASE_ADDR + 0x38); /* GP35 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x39); /* GP36 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x3a); /* GP37 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x3b); /* GP40 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x3c); /* GP41 */
+	outl(0x86, PME_IO_BASE_ADDR + 0x3d); /* GP42 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x3e); /* GP43 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x3f); /* GP50 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x40); /* GP51 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x41); /* GP52 */
+	outl(0x04, PME_IO_BASE_ADDR + 0x42); /* GP53 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x43); /* GP54 */
+	outl(0x04, PME_IO_BASE_ADDR + 0x44); /* GP55 */
+	outl(0x05, PME_IO_BASE_ADDR + 0x45); /* GP56 */
+	outl(0x04, PME_IO_BASE_ADDR + 0x46); /* GP57 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x47); /* GP58 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x48); /* GP59 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x4b); /* GP1 */
+	outl(0x04, PME_IO_BASE_ADDR + 0x4c); /* GP2 */
+	outl(0xc0, PME_IO_BASE_ADDR + 0x4d); /* GP3 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x4e); /* GP4 */
+	outl(0x07, PME_IO_BASE_ADDR + 0x4f); /* GP5 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x50); /* GP6 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x56); /* FAN1 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x57); /* FAN2 */
+	outl(0x50, PME_IO_BASE_ADDR + 0x58); /* Fan Control */
+	outl(0xff, PME_IO_BASE_ADDR + 0x59); /* Fan1 Tachometer */
+	outl(0xff, PME_IO_BASE_ADDR + 0x5a); /* Fan2 Tachometer */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5b); /* Fan1 Preload */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5c); /* Fan2 Preload */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5d); /* LED1 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5e); /* LED2 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5f); /* Keyboard Scan Code */
+	outb(0xaa, port);		/* Exit the configuration state. */
+}
diff --git a/src/mainboard/rca/rm4100/irq_tables.c b/src/mainboard/rca/rm4100/irq_tables.c
new file mode 100644
index 0000000000..84b57eb882
--- /dev/null
+++ b/src/mainboard/rca/rm4100/irq_tables.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,  /* u32 signature */
+	PIRQ_VERSION,    /* u16 version   */
+	32+16*IRQ_SLOT_COUNT,	 /* there can be total 10 devices on the bus */
+	0x00,		 /* Where the interrupt router lies (bus) */
+	(0x1f<<3)|0x0,   /* Where the interrupt router lies (dev) */
+	0,		 /* IRQs devoted exclusively to PCI usage */
+	0x8086,		 /* Vendor */
+	0x24c0,		 /* Device */
+	0,		 /* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x14,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+	{
+		/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
+		{0x00,(0x1d<<3)|0x0, {{0x60, 0x1ef8}, {0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x01ef8}}, 0x0, 0x0}, /* [A] USB UHCI Controller #1 */
+		{0x00,(0x1d<<3)|0x1, {{0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x1ef8}, {0x60, 0x01ef8}}, 0x0, 0x0}, /* [B] USB UHCI Controller #2 */
+		{0x00,(0x1d<<3)|0x2, {{0x62, 0x1ef8}, {0x63, 0x1ef8}, {0x60, 0x1ef8}, {0x61, 0x01ef8}}, 0x0, 0x0}, /* [C] USB UHCI Controller #3 */
+		{0x00,(0x1d<<3)|0x7, {{0x63, 0x1ef8}, {0x60, 0x1ef8}, {0x61, 0x1ef8}, {0x62, 0x01ef8}}, 0x0, 0x0}, /* [D] USB2 EHCI Controller */
+		{0x00,(0x1f<<3)|0x1, {{0x60, 0x1ef8}, {0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x01ef8}}, 0x0, 0x0}, /* [A] IDE Controller */
+		{0x00,(0x1f<<3)|0x3, {{0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x1ef8}, {0x60, 0x01ef8}}, 0x0, 0x0}, /* [B] SMBus Controller */
+		{0x00,(0x02<<3)|0x0, {{0x60, 0x1ef8}, {0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x01ef8}}, 0x0, 0x0}, /* [A] VGA compatible controller */
+		{0x00,(0x1f<<3)|0x5, {{0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x1ef8}, {0x60, 0x01ef8}}, 0x0, 0x0}, /* [B] AC'97 Audio Controller */
+		{0x01,(0x08<<3)|0x0, {{0x68, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, /* [A] Ethernet controller */
+		{0x00,(0x1f<<3)|0x6, {{0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x1ef8}, {0x64, 0x01ef8}}, 0x0, 0x0}, /* [B] AC'97 Modem Controller */
+	}
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/rca/rm4100/mainboard.c b/src/mainboard/rca/rm4100/mainboard.c
new file mode 100644
index 0000000000..0c7863d0cf
--- /dev/null
+++ b/src/mainboard/rca/rm4100/mainboard.c
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include "chip.h"
+
+struct chip_operations mainboard_rca_rm4100_ops = {
+	CHIP_NAME("RCA RM4100 Mainboard")
+};
diff --git a/src/mainboard/rca/rm4100/spd_table.h b/src/mainboard/rca/rm4100/spd_table.h
new file mode 100644
index 0000000000..dccbd469a6
--- /dev/null
+++ b/src/mainboard/rca/rm4100/spd_table.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <spd.h>
+
+struct spd_entry {
+	unsigned int address;
+	unsigned int data;
+};
+
+/*
+ * The onboard 128MB PC133 memory does not have an SPD EEPROM so the values
+ * have to be set manually, the onboard memory is located in socket1 (0x51).
+ */
+const struct spd_entry spd_table [] = {
+	{SPD_MEMORY_TYPE,                     0x04}, /* (Fundamental) memory type */
+	{SPD_NUM_COLUMNS,                     0x09}, /* Number of column address bits */
+	{SPD_NUM_DIMM_BANKS,                  0x01}, /* Number of module rows (banks) */
+	{SPD_MODULE_DATA_WIDTH_LSB,           0x40}, /* Module data width (LSB) */
+	{SPD_MIN_CYCLE_TIME_AT_CAS_MAX,       0x75}, /* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) */
+	{SPD_ACCESS_TIME_FROM_CLOCK,          0x54}, /* SDRAM access time from clock (highest CAS latency), CAS access time (Tac, tCAC) */
+	{SPD_DENSITY_OF_EACH_ROW_ON_MODULE,   0x20}, /* Density of each row on module */
+};
diff --git a/src/northbridge/intel/i82830/Config.lb b/src/northbridge/intel/i82830/Config.lb
new file mode 100644
index 0000000000..460bd87ed0
--- /dev/null
+++ b/src/northbridge/intel/i82830/Config.lb
@@ -0,0 +1,22 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+config chip.h
+object northbridge.o
diff --git a/src/northbridge/intel/i82830/chip.h b/src/northbridge/intel/i82830/chip.h
new file mode 100644
index 0000000000..af398f5e23
--- /dev/null
+++ b/src/northbridge/intel/i82830/chip.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+struct northbridge_intel_i82830_config {
+};
+
+extern struct chip_operations northbridge_intel_i82830_ops;
diff --git a/src/northbridge/intel/i82830/debug.c b/src/northbridge/intel/i82830/debug.c
new file mode 100644
index 0000000000..7eeabdef47
--- /dev/null
+++ b/src/northbridge/intel/i82830/debug.c
@@ -0,0 +1,66 @@
+
+static void print_debug_pci_dev(unsigned dev)
+{
+	print_debug("PCI: ");
+	print_debug_hex8((dev >> 16) & 0xff);
+	print_debug_char(':');
+	print_debug_hex8((dev >> 11) & 0x1f);
+	print_debug_char('.');
+	print_debug_hex8((dev >> 8) & 7);
+}
+
+static void print_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		print_debug_pci_dev(dev);
+		print_debug("\r\n");
+	}
+}
+
+static void dump_pci_device(unsigned dev)
+{
+	int i;
+	print_debug_pci_dev(dev);
+	print_debug("\r\n");
+	
+	for(i = 0; i <= 255; i++) {
+		unsigned char val;
+		if ((i & 0x0f) == 0) {
+			print_debug_hex8(i);
+			print_debug_char(':');
+		}
+		val = pci_read_config8(dev, i);
+		print_debug_char(' ');
+		print_debug_hex8(val);
+		if ((i & 0x0f) == 0x0f) {
+			print_debug("\r\n");
+		}
+	}
+}
+
+static void dump_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		dump_pci_device(dev);
+	}
+}
diff --git a/src/northbridge/intel/i82830/i82830.h b/src/northbridge/intel/i82830/i82830.h
new file mode 100644
index 0000000000..c4e0b140fb
--- /dev/null
+++ b/src/northbridge/intel/i82830/i82830.h
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define RRBAR   0x48 /* Register Range Base Address (0x00000000) */
+#define GCC0    0x50 /* GMCH Control #0 (0xa072) */
+#define GCC1    0x52 /* GMCH Control #1 (0x0000) */
+#define FDHC    0x58 /* Fixed DRAM Hole Control (0x00) */
+#define PAM0    0x59 /* Programable Attribute Map #0 (0x00) */
+#define PAM1    0x5a /* Programable Attribute Map #1 (0x00) */
+#define PAM2    0x5b /* Programable Attribute Map #2 (0x00) */
+#define PAM3    0x5c /* Programable Attribute Map #3 (0x00) */
+#define PAM4    0x5d /* Programable Attribute Map #4 (0x00) */
+#define PAM5    0x5e /* Programable Attribute Map #5 (0x00) */
+#define PAM6    0x5f /* Programable Attribute Map #6 (0x00) */
+#define DRB     0x60 /* DRAM Row Boundary #0 (0x00) */
+#define DRB1    0x61 /* DRAM Row Boundary #1 (0x00) */
+#define DRB2    0x62 /* DRAM Row Boundary #2 (0x00) */
+#define DRB3    0x63 /* DRAM Row Boundary #3 (0x00) */
+#define DRA     0x70 /* DRAM Row Attribute #0 (0xff) */
+#define DRA1    0x71 /* DRAM Row Attribute #1 (0xff) */
+#define DRT     0x78 /* DRAM Timing (0x00000010) */
+#define DRC     0x7c /* DRAM Controller Mode #0 (0x00000000) */
+#define DRC1    0x7d /* DRAM Controller Mode #1 (0x00000000) */
+#define DRC2    0x7e /* DRAM Controller Mode #2 (0x00000000) */
+#define DRC3    0x7f /* DRAM Controller Mode #3 (0x00000000) */
+#define DTC     0x8c /* DRAM Throttling Control (0x00000000) */
+#define SMRAM   0x90 /* System Management RAM Control (0x02) */
+#define ESMRAMC 0x91 /* Extended System Management RAM Control Reg. (0x38) */
+#define ERRSTS  0x92 /* Error Status (0x0000) */
+#define ERRCMD  0x94 /* Error Command (0x0000) */
+#define BUFF_SC 0xec /* System Memory Buffer Strength Control (0x00000000) */
+#define APBASE  0x10 /* Aperture Base Configuration (0x00000008) */
+#define APSIZE  0xb4 /* Apterture Size (0x00) */
+#define ATTBASE 0xb8 /* Aperture Translation Table Base (0x00000000) */
+
diff --git a/src/northbridge/intel/i82830/northbridge.c b/src/northbridge/intel/i82830/northbridge.c
new file mode 100644
index 0000000000..bd2690a359
--- /dev/null
+++ b/src/northbridge/intel/i82830/northbridge.c
@@ -0,0 +1,197 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include "chip.h"
+#include "i82830.h"
+
+static void northbridge_init(device_t dev)
+{
+	printk_spew("Northbridge init\n");
+}
+
+static struct device_operations northbridge_operations = {
+	.read_resources = pci_dev_read_resources,
+	.set_resources = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init = northbridge_init,
+	.enable = 0,
+	.ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &northbridge_operations,
+	.vendor = PCI_VENDOR_ID_INTEL,
+	.device = 0x3575,
+};
+
+#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
+
+static void pci_domain_read_resources(device_t dev)
+{
+	struct resource *resource;
+
+	/* Initialize the system wide I/O space constraints. */
+	resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+	resource->limit = 0xffffUL;
+	resource->flags =
+	    IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+	/* Initialize the system wide memory resources constraints. */
+	resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+	resource->limit = 0xffffffffULL;
+	resource->flags =
+	    IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+static void ram_resource(device_t dev, unsigned long index,
+			 unsigned long basek, unsigned long sizek)
+{
+	struct resource *resource;
+
+	if (!sizek)
+		return;
+	resource = new_resource(dev, index);
+	resource->base = ((resource_t) basek) << 10;
+	resource->size = ((resource_t) sizek) << 10;
+	resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE |
+	    IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+}
+
+static void tolm_test(void *gp, struct device *dev, struct resource *new)
+{
+	struct resource **best_p = gp;
+	struct resource *best;
+	best = *best_p;
+	if (!best || (best->base > new->base))
+		best = new;
+	*best_p = best;
+}
+
+static uint32_t find_pci_tolm(struct bus *bus)
+{
+	struct resource *min;
+	uint32_t tolm;
+	min = 0;
+	search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test,
+			     &min);
+	tolm = 0xffffffffUL;
+	if (min && tolm > min->base)
+		tolm = min->base;
+	return tolm;
+}
+
+static void pci_domain_set_resources(device_t dev)
+{
+	device_t mc_dev;
+	uint32_t pci_tolm;
+	int igd_memory = 0;
+
+	pci_tolm = find_pci_tolm(&dev->link[0]);
+	mc_dev = dev->link[0].children;
+	if (mc_dev) {
+		unsigned long tomk, tolmk;
+		int idx;
+
+		if (CONFIG_VIDEO_MB == 512) {
+			igd_memory = (CONFIG_VIDEO_MB);
+		} else {
+			igd_memory = (CONFIG_VIDEO_MB * 1024);
+		}
+
+		/* Get the value of the highest DRB. This tells the end of
+		 * the physical memory. The units are ticks of 32MB
+		 * i.e. 1 means 32MB.
+		 */
+		tomk = ((unsigned long)pci_read_config8(mc_dev, DRB + 3)) << 15;
+		tomk -= igd_memory;
+		printk_debug("Setting RAM size to %d\n", tomk);
+
+		/* Compute the top of low memory. */
+		tolmk = pci_tolm >> 10;
+		if (tolmk >= tomk) {
+			/* The PCI hole does does not overlap the memory. */
+			tolmk = tomk;
+		}
+
+		/* Report the memory regions. */
+		idx = 10;
+		ram_resource(dev, idx++, 0, 640);
+		ram_resource(dev, idx++, 1024, tolmk - 1024);
+	}
+	assign_resources(&dev->link[0]);
+}
+
+static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
+{
+	max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
+	return max;
+}
+
+static struct device_operations pci_domain_ops = {
+	.read_resources		= pci_domain_read_resources,
+	.set_resources		= pci_domain_set_resources,
+	.enable_resources	= enable_childrens_resources,
+	.init			= 0,
+	.scan_bus		= pci_domain_scan_bus,
+};
+
+static void cpu_bus_init(device_t dev)
+{
+	initialize_cpus(&dev->link[0]);
+}
+
+static void cpu_bus_noop(device_t dev)
+{
+}
+
+static struct device_operations cpu_bus_ops = {
+	.read_resources		= cpu_bus_noop,
+	.set_resources		= cpu_bus_noop,
+	.enable_resources	= cpu_bus_noop,
+	.init			= cpu_bus_init,
+	.scan_bus		= 0,
+};
+
+static void enable_dev(struct device *dev)
+{
+	struct device_path;
+
+	/* Set the operations if it is a special bus type. */
+	if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
+		dev->ops = &pci_domain_ops;
+		pci_set_method(dev);
+	} else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
+		dev->ops = &cpu_bus_ops;
+	}
+}
+
+struct chip_operations northbridge_intel_i82830_ops = {
+	CHIP_NAME("Intel 82830 Northbridge")
+	.enable_dev = enable_dev,
+};
diff --git a/src/northbridge/intel/i82830/raminit.c b/src/northbridge/intel/i82830/raminit.c
new file mode 100644
index 0000000000..1deb2572c8
--- /dev/null
+++ b/src/northbridge/intel/i82830/raminit.c
@@ -0,0 +1,508 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ *
+ */
+
+#include <spd.h>
+#include <sdram_mode.h>
+#include <delay.h>
+#include "debug.c"
+#include "i82830.h"
+
+/*-----------------------------------------------------------------------------
+Macros and definitions.
+-----------------------------------------------------------------------------*/
+
+/* Uncomment this to enable debugging output. */
+/* #define DEBUG_RAM_SETUP 1 */
+
+/* Debugging macros. */
+#if defined(DEBUG_RAM_SETUP)
+#define PRINT_DEBUG(x)		print_debug(x)
+#define PRINT_DEBUG_HEX8(x)	print_debug_hex8(x)
+#define PRINT_DEBUG_HEX16(x)	print_debug_hex16(x)
+#define PRINT_DEBUG_HEX32(x)	print_debug_hex32(x)
+#define DUMPNORTH()		dump_pci_device(PCI_DEV(0, 0, 0))
+#else
+#define PRINT_DEBUG(x)
+#define PRINT_DEBUG_HEX8(x)
+#define PRINT_DEBUG_HEX16(x)
+#define PRINT_DEBUG_HEX32(x)
+#define DUMPNORTH()
+#endif
+
+/* DRC[10:8] - Refresh Mode Select (RMS).
+ * 0x0 for Refresh Disabled (Self Refresh)
+ * 0x1 for Refresh interval 15.6 us for 133MHz
+ * 0x2 for Refresh interval 7.8 us for 133MHz
+ * 0x7 /* Refresh interval 128 Clocks. (Fast Refresh Mode)
+ */
+#define RAM_COMMAND_REFRESH		0x2
+
+/* DRC[6:4] - SDRAM Mode Select (SMS). */
+#define RAM_COMMAND_SELF_REFRESH	0x0
+#define RAM_COMMAND_NOP			0x1
+#define RAM_COMMAND_PRECHARGE		0x2
+#define RAM_COMMAND_MRS			0x3
+#define RAM_COMMAND_CBR			0x6
+#define RAM_COMMAND_NORMAL		0x7
+
+/* DRC[29] - Initialization Complete (IC). */
+#define RAM_COMMAND_IC			0x1
+
+/*-----------------------------------------------------------------------------
+SDRAM configuration functions.
+-----------------------------------------------------------------------------*/
+
+/* Send the specified RAM command to all DIMMs. */
+
+static void do_ram_command(const struct mem_controller *ctrl, uint32_t command,
+			   uint32_t addr_offset)
+{
+	int i;
+	uint8_t reg8, reg8_2 = 0;
+	uint32_t reg32;
+
+	/* Configure the RAM command. */
+	reg32 = pci_read_config32(ctrl->d0, DRC);
+	/* Clear bits 29, 10-8, 6-4. */
+	reg32 &= 0xdffff88f;
+	reg32 |= command << 4;
+	/* If RAM_COMMAND_NORMAL set the refresh mode and IC bit. */
+	if (command == RAM_COMMAND_NORMAL)
+		reg32 |= ((RAM_COMMAND_REFRESH << 8) | (RAM_COMMAND_IC << 29));
+	pci_write_config32(ctrl->d0, DRC, reg32);
+
+	/* RAM_COMMAND_NORMAL affects only the memory controller and
+	   doesn't need to be "sent" to the DIMMs. */
+	/* if (command == RAM_COMMAND_NORMAL) return; */
+
+	PRINT_DEBUG("    Sending RAM command 0x");
+	PRINT_DEBUG_HEX32(reg32);
+	PRINT_DEBUG(" to 0x");
+	PRINT_DEBUG_HEX32(0 + addr_offset);
+	PRINT_DEBUG("\r\n");
+
+	/* NOTE: Dual-sided ready. */
+	read32(0 + addr_offset);
+	for (i = 0; i < 4; i++) {
+		reg8 = pci_read_config8(ctrl->d0, DRB + i);
+		if (reg8 != reg8_2)
+			read32(reg8 * 32 * 1024 * 1024);
+		reg8_2 = reg8;
+	}
+}
+
+/*-----------------------------------------------------------------------------
+DIMM-independant configuration functions.
+-----------------------------------------------------------------------------*/
+
+struct dimm_size {
+	unsigned long side1;
+	unsigned long side2;
+};
+
+static struct dimm_size spd_get_dimm_size(unsigned device)
+{
+	struct dimm_size sz;
+	int i, module_density, dimm_banks;
+	sz.side1 = 0;
+	module_density = spd_read_byte(device, 31);
+	dimm_banks = spd_read_byte(device, 5);
+
+	/* Find the size of side1. */
+	/* Find the larger value. The larger value is always side1. */
+	for (i = 512; i >= 0; i >>= 1) {
+		if ((module_density & i) == i) {
+			sz.side1 = i;
+			break;
+		}
+	}
+
+	/* Set to 0 in case it's single sided. */
+	sz.side2 = 0;
+
+	/* Test if it's a dual-sided DIMM. */
+	if (dimm_banks > 1) {
+		/* Test to see if there's a second value, if so it's asymmetrical. */
+		if (module_density != i) {
+			/* Find the second value, picking up where we left off. */
+			/* i >>= 1 done initially to make sure we don't get the same value again. */
+			for (i >>= 1; i >= 0; i >>= 1) {
+				if (module_density == (sz.side1 | i)) {
+					sz.side2 = i;
+					break;
+				}
+			}
+			/* If not, it's symmetrical */
+		} else {
+			sz.side2 = sz.side1;
+		}
+	}
+
+	/* SPD byte 31 is the memory size divided by 4 so we
+	 * need to muliply by 4 to get the total size.
+	 */
+	sz.side1 *= 4;
+	sz.side2 *= 4;
+	return sz;
+}
+
+static void spd_set_dram_size(const struct mem_controller *ctrl)
+{
+	int i, value, drb1, drb2;
+
+	for (i = 0; i < DIMM_SOCKETS; i++) {
+		struct dimm_size sz;
+		unsigned device;
+		device = ctrl->channel0[i];
+		drb1 = 0;
+		drb2 = 0;
+
+		/* First check if a DIMM is actually present. */
+		if (spd_read_byte(device, 2) == 0x4) {
+			print_debug("Found DIMM in slot ");
+			print_debug_hex8(i);
+			print_debug("\r\n");
+
+			sz = spd_get_dimm_size(device);
+
+			/* WISHLIST: would be nice to display it as decimal? */
+			print_debug("DIMM is 0x");
+			print_debug_hex16(sz.side1);
+			print_debug(" on side 1\r\n");
+			print_debug("DIMM is 0x");
+			print_debug_hex16(sz.side2);
+			print_debug(" on side 2\r\n");
+
+			/* Test for PC133 (i82830 only supports PC133) */
+			/* PC133 SPD9 - cycle time is always 75 */
+			if (spd_read_byte(device, 9) != 0x75) {
+				print_err("SPD9 DIMM Is Not PC133 Compatable\r\n");
+				die("HALT\r\n");
+			}
+			/* PC133 SPD10 - access time is always 54 */
+			if (spd_read_byte(device, 10) != 0x54) {
+				print_err("SPD10 DIMM Is Not PC133 Compatable\r\n");
+				die("HALT\r\n");
+			}
+
+			/* The i82830 only supports a symmetrical dual-sided dimms
+			 * and can't handle DIMMs smaller than 32MB per
+			 * side or larger than 256MB per side.
+			 */
+			if ((sz.side2 != 0) && (sz.side1 != sz.side2)) {
+				print_err("This northbridge only supports\r\n");
+				print_err("symmetrical dual-sided DIMMs\r\n");
+				print_err("booting as a single-sided DIMM\r\n");
+				sz.side2 = 0;
+			}
+			if ((sz.side1 < 32)) {
+				print_err("DIMMs smaller than 32MB per side\r\n");
+				print_err("are not supported on this northbridge\r\n");
+				die("HALT\r\n");
+			}
+
+			if ((sz.side1 > 256)) {
+				print_err
+				    ("DIMMs larger than 256MB per side\r\n");
+				print_err
+				    ("are not supported on this northbridge\r\n");
+				die("HALT\r\n");
+			}
+
+			/* We need to divide size by 32 to set up the
+			 * DRB registers.
+			 */
+			if (sz.side1)
+				drb1 = sz.side1 / 32;
+			if (sz.side2)
+				drb2 = sz.side2 / 32;
+		} else {
+			PRINT_DEBUG("No DIMM found in slot ");
+			PRINT_DEBUG_HEX8(i);
+			PRINT_DEBUG("\r\n");
+
+			/* If there's no DIMM in the slot, set value to 0. */
+			drb1 = 0;
+			drb2 = 0;
+		}
+		/* Set the value for DRAM Row Boundary Registers */
+		if (i == 0) {
+			pci_write_config8(ctrl->d0, DRB, drb1);
+			pci_write_config8(ctrl->d0, DRB + 1, drb1 + drb2);
+			PRINT_DEBUG("DRB 0x");
+			PRINT_DEBUG_HEX8(DRB);
+			PRINT_DEBUG(" has been set to 0x");
+			PRINT_DEBUG_HEX8(drb1);
+			PRINT_DEBUG("\r\n");
+			PRINT_DEBUG("DRB1 0x");
+			PRINT_DEBUG_HEX8(DRB + 1);
+			PRINT_DEBUG(" has been set to 0x");
+			PRINT_DEBUG_HEX8(drb1 + drb2);
+			PRINT_DEBUG("\r\n");
+		} else if (i == 1) {
+			value = pci_read_config8(ctrl->d0, DRB + 1);
+			pci_write_config8(ctrl->d0, DRB + 2, value + drb1);
+			pci_write_config8(ctrl->d0, DRB + 3,
+					  value + drb1 + drb2);
+			PRINT_DEBUG("DRB2 0x");
+			PRINT_DEBUG_HEX8(DRB + 2);
+			PRINT_DEBUG(" has been set to 0x");
+			PRINT_DEBUG_HEX8(value + drb1);
+			PRINT_DEBUG("\r\n");
+			PRINT_DEBUG("DRB3 0x");
+			PRINT_DEBUG_HEX8(DRB + 3);
+			PRINT_DEBUG(" has been set to 0x");
+			PRINT_DEBUG_HEX8(value + drb1 + drb2);
+			PRINT_DEBUG("\r\n");
+
+			/* We need to set the highest DRB value to 0x64 and 0x65.
+			 * These are supposed to be "Reserved" but memory will
+			 * not initialize properly if we don't.
+			 */
+			value = pci_read_config8(ctrl->d0, DRB + 3);
+			pci_write_config8(ctrl->d0, DRB + 4, value);
+			pci_write_config8(ctrl->d0, DRB + 5, value);
+		}
+	}
+}
+
+static void set_dram_row_attributes(const struct mem_controller *ctrl)
+{
+	int i, dra, col, width, value;
+
+	for (i = 0; i < DIMM_SOCKETS; i++) {
+		unsigned device;
+		device = ctrl->channel0[i];
+
+		/* First check if a DIMM is actually present. */
+		if (spd_read_byte(device, 2) == 0x4) {
+			print_debug("Found DIMM in slot ");
+			print_debug_hex8(i);
+			print_debug(", setting DRA...\r\n");
+
+			dra = 0x00;
+
+			/* columns */
+			col = spd_read_byte(device, 4);
+
+			/* data width */
+			width = spd_read_byte(device, 6);
+
+			/* calculate page size in bits */
+			value = ((1 << col) * width);
+
+			/* convert to Kilobytes */
+			dra = ((value / 8) >> 10);
+
+			/* # of banks of DIMM (single or double sided) */
+			value = spd_read_byte(device, 5);
+
+			if (value == 1) {
+				switch (dra) {
+				case 2: /* 2KB */
+					dra = 0xF0;
+					break;
+				case 4: /* 4KB */
+					dra = 0xF1;
+					break;
+				case 8: /* 8KB */
+					dra = 0xF2;
+					break;
+				case 16: /* 16KB */
+					dra = 0xF3;
+					break;
+				default:
+					print_err("Page size not supported\r\n");
+					die("HALT\r\n");
+				}
+			} else if (value == 2) {
+				switch (dra) {
+				case 2: /* 2KB */
+					dra = 0x00;
+					break;
+				case 4: /* 4KB */
+					dra = 0x11;
+					break;
+				case 8: /* 8KB */
+					dra = 0x22;
+					break;
+				case 16: /* 16KB */
+					dra = 0x33;
+					break;
+				default:
+					print_err("Page size not supported\r\n");
+					die("HALT\r\n");
+				}
+			} else {
+				print_err("# of banks of DIMM not supported\r\n");
+				die("HALT\r\n");
+			}
+
+		} else {
+			PRINT_DEBUG("No DIMM found in slot ");
+			PRINT_DEBUG_HEX8(i);
+			PRINT_DEBUG(", setting DRA to 0xFF\r\n");
+
+			/* If there's no DIMM in the slot, set dra value to 0xFF. */
+			dra = 0xFF;
+		}
+
+		/* Set the value for DRAM Row Attribute Registers */
+		pci_write_config8(ctrl->d0, DRA + i, dra);
+		PRINT_DEBUG("DRA 0x");
+		PRINT_DEBUG_HEX8(DRA + i);
+		PRINT_DEBUG(" has been set to 0x");
+		PRINT_DEBUG_HEX8(dra);
+		PRINT_DEBUG("\r\n");
+	}
+}
+
+static void set_dram_timing(const struct mem_controller *ctrl)
+{
+	/* Set the value for DRAM Timing Register */
+	/* TODO: Configure the value according to SPD values. */
+	pci_write_config32(ctrl->d0, DRT, 0x00000010);
+}
+
+static void set_dram_buffer_strength(const struct mem_controller *ctrl)
+{
+	/* TODO: This needs to be set according to the DRAM tech
+	 * (x8, x16, or x32). Argh, Intel provides no docs on this!
+	 * Currently, it needs to be pulled from the output of
+	 * lspci -xxx Rx92
+	 */
+
+	/* Set the value for System Memory Buffer Strength Control Registers */
+	pci_write_config32(ctrl->d0, BUFF_SC, 0xFC9B491B);
+}
+
+/*-----------------------------------------------------------------------------
+Public interface.
+-----------------------------------------------------------------------------*/
+
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+	uint16_t value;
+	int igd_memory = 0;
+
+	PRINT_DEBUG("Setting initial registers....\r\n");
+
+	/* Set the value for GMCH Control Register #0 */
+	pci_write_config16(ctrl->d0, GCC0, 0xA072);
+
+	/* Set the value for GMCH Control Register #1 */
+	switch (CONFIG_VIDEO_MB) {
+	case 512: /* 512K of memory */
+		igd_memory = 0x2;
+		break;
+	case 1: /* 1M of memory */
+		igd_memory = 0x3;
+		break;
+	case 8: /* 8M of memory */
+		igd_memory = 0x4;
+		break;
+	default: /* No memory */
+		pci_write_config16(ctrl->d0, GCC1, 0x0002);
+		igd_memory = 0x0;
+	}
+
+	value = pci_read_config16(ctrl->d0, GCC1);
+	value |= igd_memory << 4;
+	pci_write_config16(ctrl->d0, GCC1, value);
+
+	/* Set the value for Aperture Base Configuration Register */
+	pci_write_config32(ctrl->d0, APBASE, 0x00000008);
+
+	/* Set the value for Register Range Base Address Register */
+	pci_write_config32(ctrl->d0, RRBAR, 0x00000000);
+
+	/* Set the value for Fixed DRAM Hole Control Register */
+	pci_write_config8(ctrl->d0, FDHC, 0x00);
+
+	/* Set the value for Programable Attribute Map Registers
+	 * Ideally, this should be R/W for as many ranges as possible.
+	 */
+	pci_write_config8(ctrl->d0, PAM0, 0x30);
+	pci_write_config8(ctrl->d0, PAM1, 0x33);
+	pci_write_config8(ctrl->d0, PAM2, 0x33);
+	pci_write_config8(ctrl->d0, PAM3, 0x33);
+	pci_write_config8(ctrl->d0, PAM4, 0x33);
+	pci_write_config8(ctrl->d0, PAM5, 0x33);
+	pci_write_config8(ctrl->d0, PAM6, 0x33);
+
+	/* Set the value for DRAM Throttling Control Register */
+	pci_write_config32(ctrl->d0, DTC, 0x00000000);
+
+	/* Set the value for System Management RAM Control Register */
+	pci_write_config8(ctrl->d0, SMRAM, 0x02);
+
+	/* Set the value for Extended System Management RAM Control Register */
+	pci_write_config8(ctrl->d0, ESMRAMC, 0x38);
+
+	PRINT_DEBUG("Initial registers have been set.\r\n");
+}
+
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+	spd_set_dram_size(ctrl);
+	set_dram_row_attributes(ctrl);
+	set_dram_timing(ctrl);
+	set_dram_buffer_strength(ctrl);
+}
+
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+	int i;
+
+	/* 0. Wait until power/voltages and clocks are stable (200us). */
+	udelay(200);
+
+	/* 1. Apply NOP. */
+	PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n");
+	do_ram_command(ctrl, RAM_COMMAND_NOP, 0);
+	udelay(200);
+
+	/* 2. Precharge all. Wait tRP. */
+	PRINT_DEBUG("RAM Enable 2: Precharge all\r\n");
+	do_ram_command(ctrl, RAM_COMMAND_PRECHARGE, 0);
+	udelay(1);
+
+	/* 3. Perform 8 refresh cycles. Wait tRC each time. */
+	PRINT_DEBUG("RAM Enable 3: CBR\r\n");
+	for (i = 0; i < 8; i++) {
+		do_ram_command(ctrl, RAM_COMMAND_CBR, 0);
+		udelay(1);
+	}
+
+	/* 4. Mode register set. Wait two memory cycles. */
+	/* TODO: Set offset according to DRT values */
+	PRINT_DEBUG("RAM Enable 4: Mode register set\r\n");
+	do_ram_command(ctrl, RAM_COMMAND_MRS, 0x1d0);
+	udelay(2);
+
+	/* 5. Normal operation (enables refresh) */
+	PRINT_DEBUG("RAM Enable 5: Normal operation\r\n");
+	do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0);
+	udelay(1);
+
+	PRINT_DEBUG("Northbridge following SDRAM init:\r\n");
+	DUMPNORTH();
+}
diff --git a/src/northbridge/intel/i82830/raminit.h b/src/northbridge/intel/i82830/raminit.h
new file mode 100644
index 0000000000..707d38b611
--- /dev/null
+++ b/src/northbridge/intel/i82830/raminit.h
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef NORTHBRIDGE_INTEL_I82830_RAMINIT_H
+#define NORTHBRIDGE_INTEL_I82830_RAMINIT_H
+
+/* The 82830 supports max. 2 dual-sided SO-DIMMs. */
+#define DIMM_SOCKETS	2
+
+struct mem_controller {
+	device_t d0;
+	uint16_t channel0[DIMM_SOCKETS];
+};
+
+#endif /* NORTHBRIDGE_INTEL_I82830_RAMINIT_H */
diff --git a/targets/rca/rm4100/Config.lb b/targets/rca/rm4100/Config.lb
new file mode 100644
index 0000000000..e5978716e3
--- /dev/null
+++ b/targets/rca/rm4100/Config.lb
@@ -0,0 +1,63 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Joseph Smith <joe@smittys.pointclark.net>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+target rm4100
+mainboard rca/rm4100
+
+##
+## Total number of bytes allocated for coreboot use
+## (fallback images and payloads).
+##
+# option ROM_SIZE = 1024 * 1024
+## For VGA BIOS (-64k)
+option ROM_SIZE = (1024 * 1024) - (64 * 1024)
+
+##
+## VGA Console
+## NOTE: to initialize VGA, you need to copy 
+## the VGA option ROM from the factory BIOS
+## 0=disable  1=enable
+##
+option CONFIG_CONSOLE_VGA = 1
+option CONFIG_PCI_ROM_RUN = 1
+
+##
+## Choose the amount of memory pre-allocated for VGA
+## 0 for No memory pre-allocated (Graphics memory Disabled)
+## 512 for DVMT (UMA) mode, 512K of memory pre-allocated for frame buffer
+## 1 for DVMT (UMA) mode, 1M of memory pre-allocated for frame buffer
+## 8 for DVMT (UMA) mode, 8M of memory pre-allocated for frame buffer
+##
+option CONFIG_VIDEO_MB = 8
+
+##
+## Request this level of debugging output
+##
+option DEFAULT_CONSOLE_LOGLEVEL = 7
+
+romimage "fallback"
+	option USE_FALLBACK_IMAGE = 1
+	option FALLBACK_SIZE = ROM_SIZE
+	option COREBOOT_EXTRA_VERSION = "_RM4100"
+	payload /tmp/filo.elf
+#	payload /tmp/eb-5.4.3-eepro100.elf
+end
+
+buildrom ./coreboot.rom ROM_SIZE "fallback"