summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarshall Dawson <marshalldawson3rd@gmail.com>2017-06-15 12:17:38 -0600
committerMartin Roth <martinroth@google.com>2017-06-27 20:50:54 +0000
commit4e101ada37c10282030729f4a03fd505bd4f526d (patch)
tree7cdb6f41b198ef1e9c30f66da854572893de91ed
parent4692e2fc95605a997cd9cd1cdb711e6c1f6869bc (diff)
soc/amd/stoneyridge: Fix most checkpatch errors
Correct the majority of reported errors and mark most of the remaining ones as todo. (Some of the lines requiring a >80 break are indented too much currently.) Some of the alignment in hudson.h still causes checkpatch errors, but this is intentionally left as-is. Also make other misc. changes, e.g. consistency in lower-case for hex values, using defined values, etc. These changes were confirmed to cause no changes in a Gardenia build. No other improvements were made, e.g. changing to helper functions, or converting functions like __outbyte(). BUG=chrome-os-partner:622407746 Change-Id: I768884a4c4b9505e77f5d6bfde37797520878912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat
-rw-r--r--src/soc/amd/stoneyridge/bootblock/bootblock.c6
-rw-r--r--src/soc/amd/stoneyridge/chip.c7
-rw-r--r--src/soc/amd/stoneyridge/chip.h3
-rw-r--r--src/soc/amd/stoneyridge/dimmSpd.c19
-rw-r--r--src/soc/amd/stoneyridge/early_setup.c78
-rw-r--r--src/soc/amd/stoneyridge/enable_usbdebug.c3
-rw-r--r--src/soc/amd/stoneyridge/fadt.c8
-rw-r--r--src/soc/amd/stoneyridge/fixme.c43
-rw-r--r--src/soc/amd/stoneyridge/gpio.c2
-rw-r--r--src/soc/amd/stoneyridge/hudson.c8
-rw-r--r--src/soc/amd/stoneyridge/imc.c27
-rw-r--r--src/soc/amd/stoneyridge/include/amd_pci_int_defs.h16
-rw-r--r--src/soc/amd/stoneyridge/include/amd_pci_int_types.h21
-rw-r--r--src/soc/amd/stoneyridge/include/soc/gpio.h62
-rw-r--r--src/soc/amd/stoneyridge/include/soc/hudson.h37
-rw-r--r--src/soc/amd/stoneyridge/include/soc/pci_devs.h50
-rw-r--r--src/soc/amd/stoneyridge/include/soc/smbus.h4
-rw-r--r--src/soc/amd/stoneyridge/lpc.c67
-rw-r--r--src/soc/amd/stoneyridge/model_15_init.c14
-rw-r--r--src/soc/amd/stoneyridge/northbridge.c238
-rw-r--r--src/soc/amd/stoneyridge/reset.c7
-rw-r--r--src/soc/amd/stoneyridge/sata.c9
-rw-r--r--src/soc/amd/stoneyridge/sd.c31
-rw-r--r--src/soc/amd/stoneyridge/smbus.c58
-rw-r--r--src/soc/amd/stoneyridge/smbus_spd.c101
-rw-r--r--src/soc/amd/stoneyridge/smihandler.c3
-rw-r--r--src/soc/amd/stoneyridge/uart.c3
27 files changed, 484 insertions, 441 deletions
diff --git a/src/soc/amd/stoneyridge/bootblock/bootblock.c b/src/soc/amd/stoneyridge/bootblock/bootblock.c
index 32b129862d..8efe744384 100644
--- a/src/soc/amd/stoneyridge/bootblock/bootblock.c
+++ b/src/soc/amd/stoneyridge/bootblock/bootblock.c
@@ -16,6 +16,7 @@
#include <stdint.h>
#include <arch/io.h>
#include <device/pci_ids.h>
+#include <soc/pci_devs.h>
/*
* Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
@@ -31,7 +32,7 @@ static void hudson_enable_rom(void)
u8 reg8;
pci_devfn_t dev;
- dev = PCI_DEV(0, 0x14, 3);
+ dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
/* Decode variable LPC ROM address ranges 1 and 2. */
reg8 = pci_io_read_config8(dev, 0x48);
@@ -52,7 +53,8 @@ static void hudson_enable_rom(void)
* 0xffe0(0000): 2MB
* 0xffc0(0000): 4MB
*/
- pci_io_write_config16(dev, 0x6c, 0x10000 - (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
+ pci_io_write_config16(dev, 0x6c, 0x10000
+ - (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
/* Enable LPC ROM range end at 0xffff(ffff). */
pci_io_write_config16(dev, 0x6e, 0xffff);
}
diff --git a/src/soc/amd/stoneyridge/chip.c b/src/soc/amd/stoneyridge/chip.c
index 78a29f872d..2af466bc8f 100644
--- a/src/soc/amd/stoneyridge/chip.c
+++ b/src/soc/amd/stoneyridge/chip.c
@@ -53,13 +53,12 @@ static void enable_dev(device_t dev)
}
/* Set the operations if it is a special bus type */
- if (dev->path.type == DEVICE_PATH_DOMAIN) {
+ if (dev->path.type == DEVICE_PATH_DOMAIN)
dev->ops = &pci_domain_ops;
- } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
+ else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER)
dev->ops = &cpu_bus_ops;
- } else if (dev->path.type == DEVICE_PATH_PCI) {
+ else if (dev->path.type == DEVICE_PATH_PCI)
hudson_enable(dev);
- }
}
static void soc_init(void *chip_info)
diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h
index f913b055a2..747c2956f1 100644
--- a/src/soc/amd/stoneyridge/chip.h
+++ b/src/soc/amd/stoneyridge/chip.h
@@ -18,8 +18,7 @@
#include <stdint.h>
-struct soc_amd_stoneyridge_config
-{
+struct soc_amd_stoneyridge_config {
u8 spdAddrLookup[1][1][2];
u32 ide0_enable : 1;
u32 sata0_enable : 1;
diff --git a/src/soc/amd/stoneyridge/dimmSpd.c b/src/soc/amd/stoneyridge/dimmSpd.c
index 9772809293..a69b80c69f 100644
--- a/src/soc/amd/stoneyridge/dimmSpd.c
+++ b/src/soc/amd/stoneyridge/dimmSpd.c
@@ -24,25 +24,26 @@
#include "chip.h"
#include <dimmSpd.h>
-AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINTN unused2, AGESA_READ_SPD_PARAMS *info)
+AGESA_STATUS AmdMemoryReadSPD(UINT32 unused1, UINTN unused2,
+ AGESA_READ_SPD_PARAMS *info)
{
int spdAddress;
DEVTREE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2));
- DEVTREE_CONST struct soc_amd_stoneyridge_config *config = dev->chip_info;
+ DEVTREE_CONST struct soc_amd_stoneyridge_config *conf = dev->chip_info;
- if ((dev == 0) || (config == 0))
+ if ((dev == 0) || (conf == 0))
return AGESA_ERROR;
- if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup))
+ if (info->SocketId >= ARRAY_SIZE(conf->spdAddrLookup))
return AGESA_ERROR;
- if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0]))
+ if (info->MemChannelId >= ARRAY_SIZE(conf->spdAddrLookup[0]))
return AGESA_ERROR;
- if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0]))
+ if (info->DimmId >= ARRAY_SIZE(conf->spdAddrLookup[0][0]))
return AGESA_ERROR;
- spdAddress = config->spdAddrLookup
- [info->SocketId] [info->MemChannelId] [info->DimmId];
+ spdAddress = conf->spdAddrLookup
+ [info->SocketId][info->MemChannelId][info->DimmId];
if (spdAddress == 0)
return AGESA_ERROR;
- int err = hudson_readSpd(spdAddress, (void *) info->Buffer, 128);
+ int err = hudson_readSpd(spdAddress, (void *)info->Buffer, 128);
if (err)
return AGESA_ERROR;
return AGESA_SUCCESS;
diff --git a/src/soc/amd/stoneyridge/early_setup.c b/src/soc/amd/stoneyridge/early_setup.c
index 9bca381fbe..3c58e38540 100644
--- a/src/soc/amd/stoneyridge/early_setup.c
+++ b/src/soc/amd/stoneyridge/early_setup.c
@@ -13,9 +13,6 @@
* GNU General Public License for more details.
*/
-#ifndef _STONEYRIDGE_EARLY_SETUP_C_
-#define _STONEYRIDGE_EARLY_SETUP_C_
-
#include <assert.h>
#include <stdint.h>
#include <arch/io.h>
@@ -34,9 +31,11 @@ void configure_hudson_uart(void)
{
u8 byte;
- byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2);
+ byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56
+ + CONFIG_UART_FOR_CONSOLE * 2);
byte |= 1 << 3;
- write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2, byte);
+ write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56
+ + CONFIG_UART_FOR_CONSOLE * 2, byte);
byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62);
byte |= 1 << 3;
write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62, byte);
@@ -46,7 +45,9 @@ void configure_hudson_uart(void)
write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0);
udelay(2000);
- write8((void *)0xFEDC6000 + 0x2000 * CONFIG_UART_FOR_CONSOLE + 0x88, 0x01); /* reset UART */
+ /* reset UART */
+ write8((void *)APU_UART0_BASE + (0x2000 * CONFIG_UART_FOR_CONSOLE)
+ + 0x88, 0x01);
}
void hudson_pci_port80(void)
@@ -55,7 +56,7 @@ void hudson_pci_port80(void)
pci_devfn_t dev;
/* P2P Bridge */
- dev = PCI_DEV(0, 0x14, 4);
+ dev = PCI_DEV(0, SB_PCI_PORT_DEV, SB_PCI_PORT_FUNC);
/* Chip Control: Enable subtractive decoding */
byte = pci_read_config8(dev, 0x40);
@@ -63,23 +64,23 @@ void hudson_pci_port80(void)
pci_write_config8(dev, 0x40, byte);
/* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */
- byte = pci_read_config8(dev, 0x4B);
+ byte = pci_read_config8(dev, 0x4b);
byte |= 1 << 7;
- pci_write_config8(dev, 0x4B, byte);
+ pci_write_config8(dev, 0x4b, byte);
/* The same IO Base and IO Limit here is meaningful because we set the
* bridge to be subtractive. During early setup stage, we have to make
* sure that data can go through port 0x80.
*/
/* IO Base: 0xf000 */
- byte = pci_read_config8(dev, 0x1C);
- byte |= 0xF << 4;
- pci_write_config8(dev, 0x1C, byte);
+ byte = pci_read_config8(dev, 0x1c);
+ byte |= 0xf << 4;
+ pci_write_config8(dev, 0x1c, byte);
/* IO Limit: 0xf000 */
- byte = pci_read_config8(dev, 0x1D);
- byte |= 0xF << 4;
- pci_write_config8(dev, 0x1D, byte);
+ byte = pci_read_config8(dev, 0x1d);
+ byte |= 0xf << 4;
+ pci_write_config8(dev, 0x1d, byte);
/* PCI Command: Enable IO response */
byte = pci_read_config8(dev, 0x04);
@@ -87,11 +88,11 @@ void hudson_pci_port80(void)
pci_write_config8(dev, 0x04, byte);
/* LPC controller */
- dev = PCI_DEV(0, 0x14, 3);
+ dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
- byte = pci_read_config8(dev, 0x4A);
+ byte = pci_read_config8(dev, 0x4a);
byte &= ~(1 << 5); /* disable lpc port 80 */
- pci_write_config8(dev, 0x4A, byte);
+ pci_write_config8(dev, 0x4a, byte);
}
void hudson_lpc_port80(void)
@@ -100,14 +101,14 @@ void hudson_lpc_port80(void)
pci_devfn_t dev;
/* Enable LPC controller */
- outb(0xEC, 0xCD6);
- byte = inb(0xCD7);
+ outb(0xec, PM_INDEX);
+ byte = inb(PM_DATA);
byte |= 1;
- outb(0xEC, 0xCD6);
- outb(byte, 0xCD7);
+ outb(0xec, PM_INDEX);
+ outb(byte, PM_DATA);
/* Enable port 80 LPC decode in pci function 3 configuration space. */
- dev = PCI_DEV(0, 0x14, 3);
+ dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
byte = pci_read_config8(dev, 0x4a);
byte |= 1 << 5; /* enable port 80 */
pci_write_config8(dev, 0x4a, byte);
@@ -191,17 +192,17 @@ static void lpc_wideio_window(uint16_t base, uint16_t size)
/* Find and open Base Register and program it */
tmp = pci_read_config32(dev, LPC_WIDEIO_GENERIC_PORT);
- if ((tmp & 0xFFFF) == 0) { /* WIDEIO0 */
+ if ((tmp & 0xffff) == 0) { /* WIDEIO0 */
tmp |= base;
pci_write_config32(dev, LPC_WIDEIO_GENERIC_PORT, tmp);
enable_wideio(0, size);
- } else if ((tmp & 0xFFFF0000) == 0) { /* WIDEIO1 */
+ } else if ((tmp & 0xffff0000) == 0) { /* WIDEIO1 */
tmp |= (base << 16);
pci_write_config32(dev, LPC_WIDEIO_GENERIC_PORT, tmp);
enable_wideio(1, size);
} else { /* Check WIDEIO2 register */
tmp = pci_read_config32(dev, LPC_WIDEIO2_GENERIC_PORT);
- if ((tmp & 0xFFFF) == 0) { /* WIDEIO2 */
+ if ((tmp & 0xffff) == 0) { /* WIDEIO2 */
tmp |= base;
pci_write_config32(dev, LPC_WIDEIO2_GENERIC_PORT, tmp);
enable_wideio(2, size);
@@ -226,11 +227,12 @@ void lpc_wideio_16_window(uint16_t base)
int s3_save_nvram_early(u32 dword, int size, int nvram_pos)
{
int i;
- printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos);
+ printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n",
+ dword, size, nvram_pos);
- for (i = 0; i < size; i++) {
+ for (i = 0 ; i < size ; i++) {
outb(nvram_pos, BIOSRAM_INDEX);
- outb((dword >>(8 * i)) & 0xff , BIOSRAM_DATA);
+ outb((dword >> (8 * i)) & 0xff, BIOSRAM_DATA);
nvram_pos++;
}
@@ -241,15 +243,15 @@ int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos)
{
u32 data = *old_dword;
int i;
- for (i = 0; i < size; i++) {
+ for (i = 0 ; i < size ; i++) {
outb(nvram_pos, BIOSRAM_INDEX);
data &= ~(0xff << (i * 8));
- data |= inb(BIOSRAM_DATA) << (i *8);
+ data |= inb(BIOSRAM_DATA) << (i * 8);
nvram_pos++;
}
*old_dword = data;
- printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n", *old_dword, size,
- nvram_pos-size);
+ printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n",
+ *old_dword, size, nvram_pos-size);
return nvram_pos;
}
@@ -261,7 +263,7 @@ void hudson_clk_output_48Mhz(void)
* Enable the X14M_25M_48M_OSC pin and leaving it at it's default so
* 48Mhz will be on ball AP13 (FT3b package)
*/
- memptr = (u32 *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40 );
+ memptr = (u32 *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40);
data = *memptr;
/* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */
@@ -272,11 +274,11 @@ void hudson_clk_output_48Mhz(void)
static uintptr_t hudson_spibase(void)
{
/* Make sure the base address is predictable */
- device_t dev = PCI_DEV(0, 0x14, 3);
+ device_t dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
u32 base = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER)
& 0xfffffff0;
- if (!base){
+ if (!base) {
base = SPI_BASE_ADDRESS;
pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, base
| SPI_ROM_ENABLE);
@@ -324,11 +326,9 @@ void hudson_read_mode(u32 mode)
void hudson_tpm_decode_spi(void)
{
- device_t dev = PCI_DEV(0, 0x14, 3); /* LPC device */
+ device_t dev = PCI_DEV(0, PCU_DEV, LPC_FUNC); /* LPC device */
u32 spibase = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER);
pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, spibase
| ROUTE_TPM_2_SPI);
}
-
-#endif
diff --git a/src/soc/amd/stoneyridge/enable_usbdebug.c b/src/soc/amd/stoneyridge/enable_usbdebug.c
index dc09b85503..675f4b7870 100644
--- a/src/soc/amd/stoneyridge/enable_usbdebug.c
+++ b/src/soc/amd/stoneyridge/enable_usbdebug.c
@@ -55,5 +55,6 @@ void pci_ehci_dbg_enable(pci_devfn_t dev, unsigned long base)
outb(0x7F, PM_DATA);
pci_write_config32(dev, EHCI_BAR_INDEX, base);
- pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY
+ | PCI_COMMAND_MASTER);
}
diff --git a/src/soc/amd/stoneyridge/fadt.c b/src/soc/amd/stoneyridge/fadt.c
index 9e5a7951be..fb3410c961 100644
--- a/src/soc/amd/stoneyridge/fadt.c
+++ b/src/soc/amd/stoneyridge/fadt.c
@@ -39,7 +39,7 @@
* Reference section 5.2.9 Fixed ACPI Description Table (FADT)
* in the ACPI 3.0b specification.
*/
-void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)
{
acpi_header_t *header = &(fadt->header);
@@ -125,7 +125,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->reset_reg.bit_width = 8;
fadt->reset_reg.bit_offset = 0;
fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
- fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrl = SYS_RESET;
fadt->reset_reg.addrh = 0x0;
fadt->reset_value = 6;
@@ -169,8 +169,8 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->x_pm1b_cnt_blk.addrh = 0x0;
/*
- * Note: Under this current AMD C state implementation, this is no longer
- * used and should not be reported to OS.
+ * Note: Under this current AMD C state implementation, this is no
+ * longer used and should not be reported to OS.
*/
fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
fadt->x_pm2_cnt_blk.bit_width = 0;
diff --git a/src/soc/amd/stoneyridge/fixme.c b/src/soc/amd/stoneyridge/fixme.c
index a0935e727a..d3f5f6c919 100644
--- a/src/soc/amd/stoneyridge/fixme.c
+++ b/src/soc/amd/stoneyridge/fixme.c
@@ -14,6 +14,7 @@
*/
#include <cpu/x86/mtrr.h>
+#include <soc/pci_devs.h>
#include <agesawrapper.h>
#include <amdlib.h>
@@ -25,7 +26,7 @@ void amd_initcpuio(void)
AMD_CONFIG_PARAMS StdHeader;
/* Enable legacy video routing: D18F1xF4 VGA Enable */
- PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xF4);
+ PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xf4);
PciData = 1;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
@@ -35,29 +36,29 @@ void amd_initcpuio(void)
*/
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84);
/* last address before processor local APIC at FEE00000 */
- PciData = 0x00FEDF00;
+ PciData = 0x00fedf00;
PciData |= 1 << 7; /* set NP (non-posted) bit */
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80);
/* lowest NP address is HPET at FED00000 */
- PciData = (0xFED00000 >> 8) | 3;
+ PciData = (0xfed00000 >> 8) | 3;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Map the remaining PCI hole as posted MMIO */
- PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C);
- PciData = 0x00FECF00; /* last address before non-posted range */
+ PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8c);
+ PciData = 0x00fecf00; /* last address before non-posted range */
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+ LibAmdMsrRead(TOP_MEM, &MsrReg, &StdHeader);
MsrReg = (MsrReg >> 8) | 3;
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88);
PciData = (UINT32)MsrReg;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Send all IO (0000-FFFF) to southbridge. */
- PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC4);
- PciData = 0x0000F000;
+ PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xc4);
+ PciData = 0x0000f000;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC0);
+ PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xc0);
PciData = 0x00000003;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
}
@@ -73,25 +74,25 @@ void amd_initmmio(void)
Set the MMIO Configuration Base Address and Bus Range onto MMIO
configuration base Address MSR register.
*/
- MsrReg = CONFIG_MMCONF_BASE_ADDRESS | \
- (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
- LibAmdMsrWrite(0xC0010058, &MsrReg, &StdHeader);
+ MsrReg = CONFIG_MMCONF_BASE_ADDRESS |
+ (LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2)
+ | 1;
+ LibAmdMsrWrite(0xc0010058, &MsrReg, &StdHeader);
/* For serial port */
- PciData = 0xFF03FFD5;
- PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x14, 0x3, 0x44);
+ PciData = 0xff03ffd5;
+ PciAddress.AddressValue = MAKE_SBDFO(0, 0, PCU_DEV, LPC_FUNC, 0x44);
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Set ROM cache onto WP to decrease post time */
MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull;
- LibAmdMsrWrite(0x20C, &MsrReg, &StdHeader);
- MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | \
- 0x800ull;
- LibAmdMsrWrite(0x20D, &MsrReg, &StdHeader);
+ LibAmdMsrWrite(0x20c, &MsrReg, &StdHeader);
+ MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull;
+ LibAmdMsrWrite(0x20d, &MsrReg, &StdHeader);
- if (IS_ENABLED(CONFIG_UDELAY_LAPIC)){
- LibAmdMsrRead(0x1B, &MsrReg, &StdHeader);
+ if (IS_ENABLED(CONFIG_UDELAY_LAPIC)) {
+ LibAmdMsrRead(0x1b, &MsrReg, &StdHeader);
MsrReg |= 1 << 11;
- LibAmdMsrWrite(0x1B, &MsrReg, &StdHeader);
+ LibAmdMsrWrite(0x1b, &MsrReg, &StdHeader);
}
}
diff --git a/src/soc/amd/stoneyridge/gpio.c b/src/soc/amd/stoneyridge/gpio.c
index dcef11d4bf..d49637a09c 100644
--- a/src/soc/amd/stoneyridge/gpio.c
+++ b/src/soc/amd/stoneyridge/gpio.c
@@ -22,7 +22,7 @@ int gpio_get(gpio_t gpio_num)
{
uint32_t reg;
- reg = read32((void*)(uintptr_t)gpio_num);
+ reg = read32((void *)(uintptr_t)gpio_num);
return !!(reg & GPIO_PIN_STS);
}
diff --git a/src/soc/amd/stoneyridge/hudson.c b/src/soc/amd/stoneyridge/hudson.c
index 83070144e7..e75a8091ee 100644
--- a/src/soc/amd/stoneyridge/hudson.c
+++ b/src/soc/amd/stoneyridge/hudson.c
@@ -65,16 +65,16 @@ void hudson_enable(device_t dev)
case (0x14 << 3) | 7: /* 0:14.7 SD */
if (dev->enabled == 0) {
// read the VENDEV ID
- device_t sd_dev = dev_find_slot( 0, PCI_DEVFN( 0x14, 7));
- u32 sd_device_id = pci_read_config32( sd_dev, 0) >> 16;
+ device_t sd_dev = dev_find_slot(0, PCI_DEVFN(0x14, 7));
+ u32 sd_device_id = pci_read_config32(sd_dev, 0) >> 16;
/* turn off the SDHC controller in the PM reg */
u8 reg8;
if (sd_device_id == PCI_DEVICE_ID_AMD_HUDSON_SD) {
reg8 = pm_read8(PM_HUD_SD_FLASH_CTRL);
reg8 &= ~BIT(0);
pm_write8(PM_HUD_SD_FLASH_CTRL, reg8);
- }
- else if (sd_device_id == PCI_DEVICE_ID_AMD_YANGTZE_SD) {
+ } else if (sd_device_id
+ == PCI_DEVICE_ID_AMD_YANGTZE_SD) {
reg8 = pm_read8(PM_YANG_SD_FLASH_CTRL);
reg8 &= ~BIT(0);
pm_write8(PM_YANG_SD_FLASH_CTRL, reg8);
diff --git a/src/soc/amd/stoneyridge/imc.c b/src/soc/amd/stoneyridge/imc.c
index b4e1d9d53a..7e40a99086 100644
--- a/src/soc/amd/stoneyridge/imc.c
+++ b/src/soc/amd/stoneyridge/imc.c
@@ -45,13 +45,12 @@ void imc_reg_init(void)
write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x13), 0xff);
write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x14), 0xff);
- reg8 = pci_read_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4);
- reg8 &= 0x8F;
+ reg8 = pci_read_config8(PCI_DEV(0, 0x18, 0x3), 0x1e4);
+ reg8 &= 0x8f;
reg8 |= 0x10;
- pci_write_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4, reg8);
+ pci_write_config8(PCI_DEV(0, 0x18, 0x3), 0x1e4, reg8);
}
-#ifndef __PRE_RAM__
void enable_imc_thermal_zone(void)
{
AMD_CONFIG_PARAMS StdHeader;
@@ -62,12 +61,12 @@ void enable_imc_thermal_zone(void)
regs[0] = 0;
regs[1] = 0;
FunNum = Fun_80;
- for (i = 0; i <= 1; i++)
+ for (i = 0 ; i <= 1 ; i++)
WriteECmsg(MSG_REG0 + i, AccessWidth8, &regs[i], &StdHeader);
WriteECmsg(MSG_SYS_TO_IMC, AccessWidth8, &FunNum, &StdHeader);
WaitForEcLDN9MailboxCmdAck(&StdHeader);
- for (i = 2; i <= 9; i++)
+ for (i = 2 ; i <= 9 ; i++)
ReadECmsg(MSG_REG0 + i, AccessWidth8, &regs[i], &StdHeader);
/* enable thermal zone 0 */
@@ -75,14 +74,13 @@ void enable_imc_thermal_zone(void)
regs[0] = 0;
regs[1] = 0;
FunNum = Fun_81;
- for (i = 0; i <= 9; i++)
+ for (i = 0 ; i <= 9 ; i++)
WriteECmsg(MSG_REG0 + i, AccessWidth8, &regs[i], &StdHeader);
WriteECmsg(MSG_SYS_TO_IMC, AccessWidth8, &FunNum, &StdHeader);
WaitForEcLDN9MailboxCmdAck(&StdHeader);
}
-#endif
-/* Bettong Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
* HWM will fail to read the input temperature via I2C if other
* software switches the I2C address. AMD recommends using IMC
@@ -94,8 +92,13 @@ void oem_fan_control(FCH_DATA_BLOCK *FchParams)
imc_reg_init();
FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* 1 IMC, 0 HWM */
+ FchParams->Hwm.HwmControl = 1;
+
+ /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
+ FchParams->Imc.ImcEnableOverWrite = 1;
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC),
+ FchParams->StdHeader);
}
diff --git a/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h b/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h
index 361c06f5b7..f3f60d3b61 100644
--- a/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h
+++ b/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h
@@ -22,7 +22,7 @@
* routing table
*/
-#define PIRQ_NC 0x1F /* Not Used */
+#define PIRQ_NC 0x1f /* Not Used */
#define PIRQ_A 0x00 /* INT A */
#define PIRQ_B 0x01 /* INT B */
#define PIRQ_C 0x02 /* INT C */
@@ -33,12 +33,12 @@
#define PIRQ_H 0x07 /* INT H */
#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */
#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */
-#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */
-#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */
-#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */
-#define PIRQ_SIRQB 0x0D /* Serial IRQ INTB */
-#define PIRQ_SIRQC 0x0E /* Serial IRQ INTC */
-#define PIRQ_SIRQD 0x0F /* Serial IRQ INTD */
+#define PIRQ_MISC1 0x0a /* Miscellaneous1 IRQ Settings */
+#define PIRQ_MISC2 0x0b /* Miscellaneous2 IRQ Settings */
+#define PIRQ_SIRQA 0x0c /* Serial IRQ INTA */
+#define PIRQ_SIRQB 0x0d /* Serial IRQ INTB */
+#define PIRQ_SIRQC 0x0e /* Serial IRQ INTC */
+#define PIRQ_SIRQD 0x0f /* Serial IRQ INTD */
#define PIRQ_SCI 0x10 /* SCI IRQ */
#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */
#define PIRQ_ASF 0x12 /* ASF */
@@ -46,7 +46,7 @@
#define PIRQ_FC 0x14 /* FC */
#define PIRQ_GEC 0x15 /* GEC */
#define PIRQ_PMON 0x16 /* Performance Monitor */
-#define PIRQ_SD 0x17 /* SD */
+#define PIRQ_SD 0x17 /* SD */
#define PIRQ_IMC0 0x20 /* IMC INT0 */
#define PIRQ_IMC1 0x21 /* IMC INT1 */
#define PIRQ_IMC2 0x22 /* IMC INT2 */
diff --git a/src/soc/amd/stoneyridge/include/amd_pci_int_types.h b/src/soc/amd/stoneyridge/include/amd_pci_int_types.h
index 30ab0d4839..ab1f70b869 100644
--- a/src/soc/amd/stoneyridge/include/amd_pci_int_types.h
+++ b/src/soc/amd/stoneyridge/include/amd_pci_int_types.h
@@ -16,17 +16,22 @@
#ifndef AMD_PCI_INT_TYPES_H
#define AMD_PCI_INT_TYPES_H
-const char * intr_types[] = {
- [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t",
- [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD",
- [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t", "PerMon\t", "SD\t\t",
- [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t",
- [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC",
- [0x7F] = "RSVD\t",
+const char *intr_types[] = {
+ [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t",
+ "INTF#\t", "INTG#\t", "INTH#\t",
+ [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA",
+ "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD",
+ [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t",
+ "PerMon\t", "SD\t\t",
+ [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t",
+ "IMC INT4\t", "IMC INT5\t",
+ [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB",
+ "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC",
+ [0x7f] = "RSVD\t",
[0x40] = "IDE\t", "SATA\t",
[0x50] = "GPPInt0\t", "GPPInt1\t", "GPPInt2\t", "GPPInt3\t",
[0x62] = "GPIO\t",
- [0x70] = "I2C0\t", "I2C1\t", "I2C2\t","I2C3\t", "UART0\t", "UART1\t",
+ [0x70] = "I2C0\t", "I2C1\t", "I2C2\t", "I2C3\t", "UART0\t", "UART1\t",
};
#endif /* AMD_PCI_INT_TYPES_H */
diff --git a/src/soc/amd/stoneyridge/include/soc/gpio.h b/src/soc/amd/stoneyridge/include/soc/gpio.h
index 07d4009efa..a66701ac56 100644
--- a/src/soc/amd/stoneyridge/include/soc/gpio.h
+++ b/src/soc/amd/stoneyridge/include/soc/gpio.h
@@ -30,98 +30,98 @@
#define GPIO_0 (GPIO_BANK0_CONTROL + 0x00)
#define GPIO_1 (GPIO_BANK0_CONTROL + 0x04)
#define GPIO_2 (GPIO_BANK0_CONTROL + 0x08)
-#define GPIO_3 (GPIO_BANK0_CONTROL + 0x0C)
+#define GPIO_3 (GPIO_BANK0_CONTROL + 0x0c)
#define GPIO_4 (GPIO_BANK0_CONTROL + 0x10)
#define GPIO_5 (GPIO_BANK0_CONTROL + 0x14)
#define GPIO_6 (GPIO_BANK0_CONTROL + 0x18)
-#define GPIO_7 (GPIO_BANK0_CONTROL + 0x1C)
+#define GPIO_7 (GPIO_BANK0_CONTROL + 0x1c)
#define GPIO_8 (GPIO_BANK0_CONTROL + 0x20)
#define GPIO_9 (GPIO_BANK0_CONTROL + 0x24)
#define GPIO_10 (GPIO_BANK0_CONTROL + 0x28)
-#define GPIO_11 (GPIO_BANK0_CONTROL + 0x2C)
+#define GPIO_11 (GPIO_BANK0_CONTROL + 0x2c)
#define GPIO_12 (GPIO_BANK0_CONTROL + 0x30)
#define GPIO_13 (GPIO_BANK0_CONTROL + 0x34)
#define GPIO_14 (GPIO_BANK0_CONTROL + 0x38)
-#define GPIO_15 (GPIO_BANK0_CONTROL + 0x3C)
+#define GPIO_15 (GPIO_BANK0_CONTROL + 0x3c)
#define GPIO_16 (GPIO_BANK0_CONTROL + 0x40)
#define GPIO_17 (GPIO_BANK0_CONTROL + 0x44)
#define GPIO_18 (GPIO_BANK0_CONTROL + 0x48)
-#define GPIO_19 (GPIO_BANK0_CONTROL + 0x4C)
+#define GPIO_19 (GPIO_BANK0_CONTROL + 0x4c)
#define GPIO_20 (GPIO_BANK0_CONTROL + 0x50)
#define GPIO_21 (GPIO_BANK0_CONTROL + 0x54)
#define GPIO_22 (GPIO_BANK0_CONTROL + 0x58)
-#define GPIO_23 (GPIO_BANK0_CONTROL + 0x5C)
+#define GPIO_23 (GPIO_BANK0_CONTROL + 0x5c)
#define GPIO_24 (GPIO_BANK0_CONTROL + 0x60)
#define GPIO_25 (GPIO_BANK0_CONTROL + 0x64)
#define GPIO_26 (GPIO_BANK0_CONTROL + 0x68)
-#define GPIO_39 (GPIO_BANK0_CONTROL + 0x9C)
-#define GPIO_42 (GPIO_BANK0_CONTROL + 0xA8)
+#define GPIO_39 (GPIO_BANK0_CONTROL + 0x9c)
+#define GPIO_42 (GPIO_BANK0_CONTROL + 0xa8)
/* GPIO_64 - GPIO_127 */
#define GPIO_BANK1 (CONTROL AMD_SB_ACPI_MMIO_ADDR + 0x1600)
#define GPIO_64 (GPIO_BANK1_CONTROL + 0x00)
#define GPIO_65 (GPIO_BANK1_CONTROL + 0x04)
#define GPIO_66 (GPIO_BANK1_CONTROL + 0x08)
-#define GPIO_67 (GPIO_BANK1_CONTROL + 0x0C)
+#define GPIO_67 (GPIO_BANK1_CONTROL + 0x0c)
#define GPIO_68 (GPIO_BANK1_CONTROL + 0x10)
#define GPIO_69 (GPIO_BANK1_CONTROL + 0x14)
#define GPIO_70 (GPIO_BANK1_CONTROL + 0x18)
-#define GPIO_71 (GPIO_BANK1_CONTROL + 0x1C)
+#define GPIO_71 (GPIO_BANK1_CONTROL + 0x1c)
#define GPIO_72 (GPIO_BANK1_CONTROL + 0x20)
#define GPIO_74 (GPIO_BANK1_CONTROL + 0x28)
-#define GPIO_75 (GPIO_BANK1_CONTROL + 0x2C)
+#define GPIO_75 (GPIO_BANK1_CONTROL + 0x2c)
#define GPIO_76 (GPIO_BANK1_CONTROL + 0x30)
#define GPIO_84 (GPIO_BANK1_CONTROL + 0x50)
#define GPIO_85 (GPIO_BANK1_CONTROL + 0x54)
#define GPIO_86 (GPIO_BANK1_CONTROL + 0x58)
-#define GPIO_87 (GPIO_BANK1_CONTROL + 0x5C)
+#define GPIO_87 (GPIO_BANK1_CONTROL + 0x5c)
#define GPIO_88 (GPIO_BANK1_CONTROL + 0x60)
#define GPIO_89 (GPIO_BANK1_CONTROL + 0x64)
#define GPIO_90 (GPIO_BANK1_CONTROL + 0x68)
-#define GPIO_91 (GPIO_BANK1_CONTROL + 0x6C)
+#define GPIO_91 (GPIO_BANK1_CONTROL + 0x6c)
#define GPIO_92 (GPIO_BANK1_CONTROL + 0x70)
#define GPIO_93 (GPIO_BANK1_CONTROL + 0x74)
-#define GPIO_95 (GPIO_BANK1_CONTROL + 0x7C)
+#define GPIO_95 (GPIO_BANK1_CONTROL + 0x7c)
#define GPIO_96 (GPIO_BANK1_CONTROL + 0x80)
#define GPIO_97 (GPIO_BANK1_CONTROL + 0x84)
#define GPIO_98 (GPIO_BANK1_CONTROL + 0x88)
-#define GPIO_99 (GPIO_BANK1_CONTROL + 0x8C)
+#define GPIO_99 (GPIO_BANK1_CONTROL + 0x8c)
#define GPIO_100 (GPIO_BANK1_CONTROL + 0x90)
#define GPIO_101 (GPIO_BANK1_CONTROL + 0x94)
#define GPIO_102 (GPIO_BANK1_CONTROL + 0x98)
-#define GPIO_113 (GPIO_BANK1_CONTROL + 0xC4)
-#define GPIO_114 (GPIO_BANK1_CONTROL + 0xC8)
-#define GPIO_115 (GPIO_BANK1_CONTROL + 0xCC)
-#define GPIO_116 (GPIO_BANK1_CONTROL + 0xD0)
-#define GPIO_117 (GPIO_BANK1_CONTROL + 0xD4)
-#define GPIO_118 (GPIO_BANK1_CONTROL + 0xD8)
-#define GPIO_119 (GPIO_BANK1_CONTROL + 0xDC)
-#define GPIO_120 (GPIO_BANK1_CONTROL + 0xE0)
-#define GPIO_121 (GPIO_BANK1_CONTROL + 0xE4)
-#define GPIO_122 (GPIO_BANK1_CONTROL + 0xE8)
-#define GPIO_126 (GPIO_BANK1_CONTROL + 0xF8)
+#define GPIO_113 (GPIO_BANK1_CONTROL + 0xc4)
+#define GPIO_114 (GPIO_BANK1_CONTROL + 0xc8)
+#define GPIO_115 (GPIO_BANK1_CONTROL + 0xcc)
+#define GPIO_116 (GPIO_BANK1_CONTROL + 0xd0)
+#define GPIO_117 (GPIO_BANK1_CONTROL + 0xd4)
+#define GPIO_118 (GPIO_BANK1_CONTROL + 0xd8)
+#define GPIO_119 (GPIO_BANK1_CONTROL + 0xdc)
+#define GPIO_120 (GPIO_BANK1_CONTROL + 0xe0)
+#define GPIO_121 (GPIO_BANK1_CONTROL + 0xe4)
+#define GPIO_122 (GPIO_BANK1_CONTROL + 0xe8)
+#define GPIO_126 (GPIO_BANK1_CONTROL + 0xf8)
/* GPIO_128 - GPIO_183 */
#define GPIO_BANK2_CONTROL (AMD_SB_ACPI_MMIO_ADDR + 0x1700)
#define GPIO_129 (GPIO_BANK2_CONTROL + 0x04)
#define GPIO_130 (GPIO_BANK2_CONTROL + 0x08)
-#define GPIO_131 (GPIO_BANK2_CONTROL + 0x0C)
+#define GPIO_131 (GPIO_BANK2_CONTROL + 0x0c)
#define GPIO_132 (GPIO_BANK2_CONTROL + 0x10)
#define GPIO_133 (GPIO_BANK2_CONTROL + 0x14)
#define GPIO_134 (GPIO_BANK2_CONTROL + 0x18)
-#define GPIO_135 (GPIO_BANK2_CONTROL + 0x1C)
+#define GPIO_135 (GPIO_BANK2_CONTROL + 0x1c)
#define GPIO_136 (GPIO_BANK2_CONTROL + 0x20)
#define GPIO_137 (GPIO_BANK2_CONTROL + 0x24)
#define GPIO_138 (GPIO_BANK2_CONTROL + 0x28)
-#define GPIO_139 (GPIO_BANK2_CONTROL + 0x2C)
+#define GPIO_139 (GPIO_BANK2_CONTROL + 0x2c)
#define GPIO_140 (GPIO_BANK2_CONTROL + 0x30)
#define GPIO_141 (GPIO_BANK2_CONTROL + 0x34)
#define GPIO_142 (GPIO_BANK2_CONTROL + 0x38)
-#define GPIO_143 (GPIO_BANK2_CONTROL + 0x3C)
+#define GPIO_143 (GPIO_BANK2_CONTROL + 0x3c)
#define GPIO_144 (GPIO_BANK2_CONTROL + 0x40)
#define GPIO_145 (GPIO_BANK2_CONTROL + 0x44)
#define GPIO_146 (GPIO_BANK2_CONTROL + 0x48)
-#define GPIO_147 (GPIO_BANK2_CONTROL + 0x4C)
+#define GPIO_147 (GPIO_BANK2_CONTROL + 0x4c)
#define GPIO_148 (GPIO_BANK2_CONTROL + 0x50)
typedef uint32_t gpio_t;
diff --git a/src/soc/amd/stoneyridge/include/soc/hudson.h b/src/soc/amd/stoneyridge/include/soc/hudson.h
index bfe506edd1..c69ab679e6 100644
--- a/src/soc/amd/stoneyridge/include/soc/hudson.h
+++ b/src/soc/amd/stoneyridge/include/soc/hudson.h
@@ -29,6 +29,9 @@
*/
#define PM_MMIO_BASE 0xfed80300
+#define APU_UART0_BASE 0xfedc6000
+#define APU_UART1_BASE 0xfedc8000
+
/* Power management index/data registers */
#define BIOSRAM_INDEX 0xcd4
#define BIOSRAM_DATA 0xcd5
@@ -44,15 +47,17 @@
#define PM_TMR_BLK 0x64
#define PM_CPU_CTRL 0x66
#define PM_GPE0_BLK 0x68
-#define PM_ACPI_SMI_CMD 0x6A
+#define PM_ACPI_SMI_CMD 0x6a
#define PM_ACPI_CONF 0x74
-#define PM_PMIO_DEBUG 0xD2
-#define PM_MANUAL_RESET 0xD3
-#define PM_HUD_SD_FLASH_CTRL 0xE7
-#define PM_YANG_SD_FLASH_CTRL 0xE8
-#define PM_PCIB_CFG 0xEA
+#define PM_PMIO_DEBUG 0xd2
+#define PM_MANUAL_RESET 0xd3
+#define PM_HUD_SD_FLASH_CTRL 0xe7
+#define PM_YANG_SD_FLASH_CTRL 0xe8
+#define PM_PCIB_CFG 0xea
+
+#define SYS_RESET 0xcf9
-#define STONEYRIDGE_ACPI_IO_BASE CONFIG_STONEYRIDGE_ACPI_IO_BASE
+#define STONEYRIDGE_ACPI_IO_BASE CONFIG_STONEYRIDGE_ACPI_IO_BASE
#define ACPI_PM_EVT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x00) /* 4 bytes */
#define ACPI_PM1_CNT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x04) /* 2 bytes */
#define ACPI_PM_TMR_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x18) /* 4 bytes */
@@ -69,10 +74,10 @@
#define REV_STONEYRIDGE_A11 0x11
#define REV_STONEYRIDGE_A12 0x12
-#define SPIROM_BASE_ADDRESS_REGISTER 0xA0
+#define SPIROM_BASE_ADDRESS_REGISTER 0xa0
#define ROUTE_TPM_2_SPI BIT(3)
#define SPI_ROM_ENABLE 0x02
-#define SPI_BASE_ADDRESS 0xFEC10000
+#define SPI_BASE_ADDRESS 0xfec10000
#define LPC_IO_PORT_DECODE_ENABLE 0x44
#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
@@ -122,7 +127,7 @@
#define LPC_WIDEIO2_GENERIC_PORT 0x90
-#define SPI_CNTRL0 0x00
+#define SPI_CNTRL0 0x00
#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18))
/* Nominal is 16.7MHz on older devices, 33MHz on newer */
#define SPI_READ_MODE_NOM 0x00000000
@@ -138,7 +143,7 @@
#define SPI_CNTRL1 0x0c
/* Use SPI_SPEED_16M-SPI_SPEED_66M below for hudson and bolton */
-#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12))
+#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12))
#define SPI_NORM_SPEED_SH 12
#define SPI_FAST_SPEED_SH 8
@@ -154,22 +159,24 @@
#define SPI_SPEED_800K (BIT(2) | BIT(0))
#define SPI_NORM_SPEED_NEW_SH 12
#define SPI_FAST_SPEED_NEW_SH 8
-#define SPI_ALT_SPEED_NEW_SH 4
+#define SPI_ALT_SPEED_NEW_SH 4
#define SPI_TPM_SPEED_NEW_SH 0
-#define SPI100_HOST_PREF_CONFIG 0x2c
+#define SPI100_HOST_PREF_CONFIG 0x2c
#define SPI_RD4DW_EN_HOST BIT(15)
static inline int hudson_sata_enable(void)
{
/* True if IDE or AHCI. */
- return (CONFIG_STONEYRIDGE_SATA_MODE == 0) || (CONFIG_STONEYRIDGE_SATA_MODE == 2);
+ return (CONFIG_STONEYRIDGE_SATA_MODE == 0) ||
+ (CONFIG_STONEYRIDGE_SATA_MODE == 2);
}
static inline int hudson_ide_enable(void)
{
/* True if IDE or LEGACY IDE. */
- return (CONFIG_STONEYRIDGE_SATA_MODE == 0) || (CONFIG_STONEYRIDGE_SATA_MODE == 3);
+ return (CONFIG_STONEYRIDGE_SATA_MODE == 0) ||
+ (CONFIG_STONEYRIDGE_SATA_MODE == 3);
}
void configure_hudson_uart(void);
diff --git a/src/soc/amd/stoneyridge/include/soc/pci_devs.h b/src/soc/amd/stoneyridge/include/soc/pci_devs.h
index cfd79d8da1..f0445422a9 100644
--- a/src/soc/amd/stoneyridge/include/soc/pci_devs.h
+++ b/src/soc/amd/stoneyridge/include/soc/pci_devs.h
@@ -22,12 +22,12 @@
#define XHCI_DEV 0x10
#define XHCI_FUNC 0
#define XHCI_DEVID 0x7814
-#define XHCI_DEVFN PCI_DEVFN(XHCI_DEV,XHCI_FUNC)
+#define XHCI_DEVFN PCI_DEVFN(XHCI_DEV, XHCI_FUNC)
#define XHCI2_DEV 0x10
#define XHCI2_FUNC 1
#define XHCI2_DEVID 0x7814
-#define XHCI2_DEVFN PCI_DEVFN(XHCI2_DEV,XHCI2_FUNC)
+#define XHCI2_DEVFN PCI_DEVFN(XHCI2_DEV, XHCI2_FUNC)
/* SATA */
#define SATA_DEV 0x11
@@ -35,7 +35,7 @@
#define SATA_IDE_DEVID 0x7800
#define AHCI_DEVID_MS 0x7801
#define AHCI_DEVID_AMD 0x7804
-#define SATA_DEVFN PCI_DEVFN(SATA_DEV,SATA_FUNC)
+#define SATA_DEVFN PCI_DEVFN(SATA_DEV, SATA_FUNC)
/* OHCI */
#define OHCI1_DEV 0x12
@@ -47,10 +47,10 @@
#define OHCI4_DEV 0x14
#define OHCI4_FUNC 5
#define OHCI_DEVID 0x7807
-#define OHCI1_DEVFN PCI_DEVFN(OHCI1_DEV,OHCI1_FUNC)
-#define OHCI2_DEVFN PCI_DEVFN(OHCI2_DEV,OHCI2_FUNC)
-#define OHCI3_DEVFN PCI_DEVFN(OHCI3_DEV,OHCI3_FUNC)
-#define OHCI4_DEVFN PCI_DEVFN(OHCI4_DEV,OHCI4_FUNC)
+#define OHCI1_DEVFN PCI_DEVFN(OHCI1_DEV, OHCI1_FUNC)
+#define OHCI2_DEVFN PCI_DEVFN(OHCI2_DEV, OHCI2_FUNC)
+#define OHCI3_DEVFN PCI_DEVFN(OHCI3_DEV, OHCI3_FUNC)
+#define OHCI4_DEVFN PCI_DEVFN(OHCI4_DEV, OHCI4_FUNC)
/* EHCI */
#define EHCI1_DEV 0x12
@@ -60,47 +60,47 @@
#define EHCI3_DEV 0x16
#define EHCI3_FUNC 2
#define EHCI_DEVID 0x7808
-#define EHCI1_DEVFN PCI_DEVFN(EHCI1_DEV,EHCI1_FUNC)
-#define EHCI2_DEVFN PCI_DEVFN(EHCI2_DEV,EHCI2_FUNC)
-#define EHCI3_DEVFN PCI_DEVFN(EHCI3_DEV,EHCI3_FUNC)
+#define EHCI1_DEVFN PCI_DEVFN(EHCI1_DEV, EHCI1_FUNC)
+#define EHCI2_DEVFN PCI_DEVFN(EHCI2_DEV, EHCI2_FUNC)
+#define EHCI3_DEVFN PCI_DEVFN(EHCI3_DEV, EHCI3_FUNC)
/* SMBUS */
#define SMBUS_DEV 0x14
#define SMBUS_FUNC 0
-#define SMBUS_DEVID 0x780B
-#define SMBUS_DEVFN PCI_DEVFN(SMBUS_DEV,SMBUS_FUNC)
+#define SMBUS_DEVID 0x780b
+#define SMBUS_DEVFN PCI_DEVFN(SMBUS_DEV, SMBUS_FUNC)
/* IDE */
#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON)
#define IDE_DEV 0x14
#define IDE_FUNC 1
-#define IDE_DEVID 0x780C
-#define IDE_DEVFN PCI_DEVFN(IDE_DEV,IDE_FUNC)
+#define IDE_DEVID 0x780c
+#define IDE_DEVFN PCI_DEVFN(IDE_DEV, IDE_FUNC)
#endif
/* HD Audio */
#define HDA_DEV 0x14
#define HDA_FUNC 2
-#define HDA_DEVID 0x780D
-#define HDA_DEVFN PCI_DEVFN(HDA_DEV,HDA_FUNC)
+#define HDA_DEVID 0x780d
+#define HDA_DEVFN PCI_DEVFN(HDA_DEV, HDA_FUNC)
/* LPC BUS */
#define PCU_DEV 0x14
#define LPC_FUNC 3
-#define LPC_DEVID 0x780E
-#define LPC_DEVFN PCI_DEVFN(LPC_DEV,LPC_FUNC)
+#define LPC_DEVID 0x780e
+#define LPC_DEVFN PCI_DEVFN(LPC_DEV, LPC_FUNC)
/* PCI Ports */
#define SB_PCI_PORT_DEV 0x14
#define SB_PCI_PORT_FUNC 4
-#define SB_PCI_PORT_DEVID 0x780F
-#define SB_PCI_PORT_DEVFN PCI_DEVFN(SB_PCI_PORT_DEV,SB_PCI_PORT_FUNC)
+#define SB_PCI_PORT_DEVID 0x780f
+#define SB_PCI_PORT_DEVFN PCI_DEVFN(SB_PCI_PORT_DEV, SB_PCI_PORT_FUNC)
/* SD Controller */
#define SD_DEV 0x14
#define SD_FUNC 7
#define SD_DEVID 0x7806
-#define SD_DEVFN PCI_DEVFN(SD_DEV,SD_FUNC)
+#define SD_DEVFN PCI_DEVFN(SD_DEV, SD_FUNC)
/* PCIe Ports */
#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON)
@@ -113,10 +113,10 @@
#define SB_PCIE_PORT2_DEVID 0x7821
#define SB_PCIE_PORT3_DEVID 0x7822
#define SB_PCIE_PORT4_DEVID 0x7823
-#define SB_PCIE_PORT1_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT1_FUNC)
-#define SB_PCIE_PORT2_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT2_FUNC)
-#define SB_PCIE_PORT3_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT3_FUNC)
-#define SB_PCIE_PORT4_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT4_FUNC)
+#define SB_PCIE_PORT1_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT1_FUNC)
+#define SB_PCIE_PORT2_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT2_FUNC)
+#define SB_PCIE_PORT3_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT3_FUNC)
+#define SB_PCIE_PORT4_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT4_FUNC)
#endif
#endif /* _PI_STONEYRIDGE_PCI_DEVS_H_ */
diff --git a/src/soc/amd/stoneyridge/include/soc/smbus.h b/src/soc/amd/stoneyridge/include/soc/smbus.h
index d4499fced0..c9b19e5fc2 100644
--- a/src/soc/amd/stoneyridge/include/soc/smbus.h
+++ b/src/soc/amd/stoneyridge/include/soc/smbus.h
@@ -38,7 +38,7 @@
#define RC_INDXC 1
#define RC_INDXP 3
-#define AB_INDX 0xCD8
+#define AB_INDX 0xcd8
#define AB_DATA (AB_INDX+4)
/* Between 1-10 seconds, We should never timeout normally
@@ -65,6 +65,6 @@ int do_smbus_recv_byte(u32 smbus_io_base, u32 device);
int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val);
void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val);
void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val);
-void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val);
+void alink_ax_indx(u32 space /*c or p? */, u32 axindc, u32 mask, u32 val);
#endif /* STONEYRIDGE_SMBUS_H */
diff --git a/src/soc/amd/stoneyridge/lpc.c b/src/soc/amd/stoneyridge/lpc.c
index b2ee843991..d45ef0a416 100644
--- a/src/soc/amd/stoneyridge/lpc.c
+++ b/src/soc/amd/stoneyridge/lpc.c
@@ -28,6 +28,7 @@
#include <arch/acpi.h>
#include <pc80/i8254.h>
#include <pc80/i8259.h>
+#include <soc/pci_devs.h>
#include <soc/hudson.h>
#include <vboot/vbnv.h>
@@ -38,7 +39,7 @@ static void lpc_init(device_t dev)
device_t sm_dev;
/* Enable the LPC Controller */
- sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ sm_dev = dev_find_slot(0, PCI_DEVFN(SMBUS_DEV, SMBUS_FUNC));
dword = pci_read_config32(sm_dev, 0x64);
dword |= 1 << 20;
pci_write_config32(sm_dev, 0x64, dword);
@@ -59,16 +60,21 @@ static void lpc_init(device_t dev)
/* Disable LPC MSI Capability */
byte = pci_read_config8(dev, 0x78);
byte &= ~(1 << 1);
- byte &= ~(1 << 0); /* Keep the old way. i.e., when bus master/DMA cycle is going
- on on LPC, it holds PCI grant, so no LPC slave cycle can
- interrupt and visit LPC. */
+ /* Keep the old way. i.e., when bus master/DMA cycle is going
+ * on on LPC, it holds PCI grant, so no LPC slave cycle can
+ * interrupt and visit LPC.
+ */
+ byte &= ~(1 << 0);
pci_write_config8(dev, 0x78, byte);
- /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads code from SPI ROM */
- /* bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12. */
- byte = pci_read_config8(dev, 0xBB);
+ /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads
+ * code from SPI ROM
+ * bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12.
+ * todo: verify both these against BKDG
+ */
+ byte = pci_read_config8(dev, 0xbb);
byte |= 1 << 0 | 1 << 3;
- pci_write_config8(dev, 0xBB, byte);
+ pci_write_config8(dev, 0xbb, byte);
cmos_check_update_date();
@@ -83,10 +89,10 @@ static void lpc_init(device_t dev)
cmos_init(0);
/* Initialize i8259 pic */
- setup_i8259 ();
+ setup_i8259();
/* Initialize i8254 timers */
- setup_i8254 ();
+ setup_i8254();
/* Set up SERIRQ, enable continuous mode */
byte = (BIT(4) | BIT(7));
@@ -101,7 +107,7 @@ static void hudson_lpc_read_resources(device_t dev)
struct resource *res;
/* Get the normal pci resources of this device */
- pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */
+ pci_dev_read_resources(dev);
/* Add an extra subtractive resource for both memory and I/O. */
res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
@@ -117,7 +123,8 @@ static void hudson_lpc_read_resources(device_t dev)
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
/* Add a memory resource for the SPI BAR. */
- fixed_mem_resource(dev, 2, SPI_BASE_ADDRESS / 1024, 1, IORESOURCE_SUBTRACTIVE);
+ fixed_mem_resource(dev, 2, SPI_BASE_ADDRESS / 1024, 1,
+ IORESOURCE_SUBTRACTIVE);
res = new_resource(dev, 3); /* IOAPIC */
res->base = IO_APIC_ADDR;
@@ -135,8 +142,9 @@ static void hudson_lpc_set_resources(struct device *dev)
/* Special case. The SpiRomEnable and other enables should STAY set. */
res = find_resource(dev, 2);
spi_enable_bits = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER);
- spi_enable_bits &= 0xF;
- pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, res->base | spi_enable_bits);
+ spi_enable_bits &= 0xf;
+ pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER,
+ res->base | spi_enable_bits);
pci_dev_set_resources(dev);
}
@@ -153,25 +161,26 @@ static void hudson_lpc_enable_childrens_resources(device_t dev)
u32 reg, reg_x;
int var_num = 0;
u16 reg_var[3];
- u16 reg_size[1] = {512};
+ u16 reg_size[1] = {512};
u8 wiosize = pci_read_config8(dev, 0x74);
- /* Be bit relaxed, tolerate that LPC region might be bigger than resource we try to fit,
- * do it like this for all regions < 16 bytes. If there is a resource > 16 bytes
- * it must be 512 bytes to be able to allocate the fresh LPC window.
+ /* Be a bit relaxed, tolerate that LPC region might be bigger than
+ * resource we try to fit, do it like this for all regions < 16 bytes.
+ * If there is a resource > 16 bytes it must be 512 bytes to be able
+ * to allocate the fresh LPC window.
*
- * AGESA likes to enable already one LPC region in wide port base 0x64-0x65,
- * using DFLT_SIO_PME_BASE_ADDRESS, 512 bytes size
- * The code tries to check if resource can fit into this region
+ * AGESA likes to enable already one LPC region in wide port base
+ * 0x64-0x65, using DFLT_SIO_PME_BASE_ADDRESS, 512 bytes size
+ * The code tries to check if resource can fit into this region.
*/
reg = pci_read_config32(dev, 0x44);
reg_x = pci_read_config32(dev, 0x48);
- /* check if ranges are free and not use them if entry is just already taken */
+ /* check if ranges are free and don't use them if already taken */
if (reg_x & (1 << 2))
var_num = 1;
- /* just in case check if someone did not manually set other ranges too */
+ /* just in case check if someone did not manually set other ranges */
if (reg_x & (1 << 24))
var_num = 2;
@@ -186,14 +195,15 @@ static void hudson_lpc_enable_childrens_resources(device_t dev)
reg_var[1] = pci_read_config16(dev, 0x66);
reg_var[0] = pci_read_config16(dev, 0x64);
- for (link = dev->link_list; link; link = link->next) {
+ /* todo: clean up the code style here */
+ for (link = dev->link_list ; link ; link = link->next) {
device_t child;
for (child = link->children; child;
child = child->sibling) {
if (child->enabled
&& (child->path.type == DEVICE_PATH_PNP)) {
struct resource *res;
- for (res = child->resource_list; res; res = res->next) {
+ for (res = child->resource_list ; res ; res = res->next) {
u32 base, end; /* don't need long long */
u32 rsize, set = 0, set_x = 0;
if (!(res->flags & IORESOURCE_IO))
@@ -238,7 +248,7 @@ static void hudson_lpc_enable_childrens_resources(device_t dev)
set |= (1 << 10);
rsize = 8;
break;
- case 0x300: /* 0x300 -0x301 */
+ case 0x300: /* 0x300 - 0x301 */
set |= (1 << 18);
rsize = 2;
break;
@@ -269,7 +279,7 @@ static void hudson_lpc_enable_childrens_resources(device_t dev)
default:
rsize = 0;
/* try AGESA allocated region in region 0 */
- if ((var_num > 0) && ((base >=reg_var[0]) &&
+ if ((var_num > 0) && ((base >= reg_var[0]) &&
((base + res->size) <= (reg_var[0] + reg_size[0]))))
rsize = reg_size[0];
}
@@ -284,9 +294,8 @@ static void hudson_lpc_enable_childrens_resources(device_t dev)
switch (var_num) {
case 0:
reg_x |= (1 << 2);
- if (res->size <= 16) {
+ if (res->size <= 16)
wiosize |= (1 << 0);
- }
break;
case 1:
reg_x |= (1 << 24);
diff --git a/src/soc/amd/stoneyridge/model_15_init.c b/src/soc/amd/stoneyridge/model_15_init.c
index 02e5b79e84..cad06bf0a5 100644
--- a/src/soc/amd/stoneyridge/model_15_init.c
+++ b/src/soc/amd/stoneyridge/model_15_init.c
@@ -43,8 +43,8 @@ void PSPProgBar3Msr(void *Buffer)
Bar3Addr = PspLibPciReadPspConfig(0x20);
Tmp64 = Bar3Addr;
printk(BIOS_DEBUG, "Bar3=%llx\n", Tmp64);
- LibAmdMsrWrite(0xC00110A2, &Tmp64, NULL);
- LibAmdMsrRead(0xC00110A2, &Tmp64, NULL);
+ LibAmdMsrWrite(PSP_MSR_PRIVATE_BLOCK_BAR, &Tmp64, NULL);
+ LibAmdMsrRead(PSP_MSR_PRIVATE_BLOCK_BAR, &Tmp64, NULL);
}
static void model_15_init(device_t dev)
@@ -67,11 +67,11 @@ static void model_15_init(device_t dev)
// BSP: make a0000-bffff UC, c0000-fffff WB
msr.lo = msr.hi = 0;
- wrmsr(0x259, msr);
+ wrmsr(MTRR_FIX_16K_A0000, msr);
msr.lo = msr.hi = 0x1e1e1e1e;
- wrmsr(0x250, msr);
- wrmsr(0x258, msr);
- for (msrno = 0x268; msrno <= 0x26f; msrno++)
+ wrmsr(MTRR_FIX_64K_00000, msr);
+ wrmsr(MTRR_FIX_16K_80000, msr);
+ for (msrno = MTRR_FIX_4K_C0000 ; msrno <= MTRR_FIX_4K_F8000 ; msrno++)
wrmsr(msrno, msr);
msr = rdmsr(SYSCFG_MSR);
@@ -85,7 +85,7 @@ static void model_15_init(device_t dev)
/* zero the machine check error status registers */
msr.lo = 0;
msr.hi = 0;
- for (i = 0; i < 6; i++)
+ for (i = 0 ; i < 6 ; i++)
wrmsr(MCI_STATUS + (i * 4), msr);
diff --git a/src/soc/amd/stoneyridge/northbridge.c b/src/soc/amd/stoneyridge/northbridge.c
index 71f4897b39..009c6dfdbf 100644
--- a/src/soc/amd/stoneyridge/northbridge.c
+++ b/src/soc/amd/stoneyridge/northbridge.c
@@ -53,31 +53,38 @@
#endif
typedef struct dram_base_mask {
- u32 base; //[47:27] at [28:8]
- u32 mask; //[47:27] at [28:8] and enable at bit 0
+ u32 base; /* [47:27] at [28:8] */
+ u32 mask; /* [47:27] at [28:8] and enable at bit 0 */
} dram_base_mask_t;
-static unsigned node_nums;
-static unsigned sblink;
+static unsigned int node_nums;
+static unsigned int sblink;
static device_t __f0_dev;
static device_t __f1_dev;
static device_t __f2_dev;
static device_t __f4_dev;
-static unsigned fx_dev = 0;
+static unsigned int fx_dev = 0;
static dram_base_mask_t get_dram_base_mask(u32 nodeid)
{
device_t dev = __f1_dev;
dram_base_mask_t d;
u32 temp;
- temp = pci_read_config32(dev, 0x44 + (nodeid << 3)); //[39:24] at [31:16]
- d.mask = ((temp & 0xfff80000) >> (8 + 3)); // mask out DramMask [26:24] too
- temp = pci_read_config32(dev, 0x144 + (nodeid << 3)) & 0xff; //[47:40] at [7:0]
+
+ /* [39:24] at [31:16] */
+ temp = pci_read_config32(dev, 0x44 + (nodeid << 3));
+
+ /* mask out DramMask [26:24] too */
+ d.mask = ((temp & 0xfff80000) >> (8 + 3));
+
+ /* [47:40] at [7:0] */
+ temp = pci_read_config32(dev, 0x144 + (nodeid << 3)) & 0xff;
d.mask |= temp << 21;
- temp = pci_read_config32(dev, 0x40 + (nodeid << 3)); //[39:24] at [31:16]
- d.mask |= (temp & 1); // enable bit
- d.base = ((temp & 0xfff80000) >> (8 + 3)); // mask out DramBase [26:24) too
- temp = pci_read_config32(dev, 0x140 + (nodeid << 3)) & 0xff; //[47:40] at [7:0]
+
+ temp = pci_read_config32(dev, 0x40 + (nodeid << 3));
+ d.mask |= (temp & 1); /* enable bit */
+ d.base = ((temp & 0xfff80000) >> (8 + 3));
+ temp = pci_read_config32(dev, 0x140 + (nodeid << 3)) & 0xff;
d.base |= temp << 21;
return d;
}
@@ -86,18 +93,20 @@ static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg,
u32 io_min, u32 io_max)
{
u32 tempreg;
- /* io range allocation */
- tempreg = (nodeid & 0xf) | ((nodeid & 0x30) << (8 - 4)) | (linkn << 4) | ((io_max & 0xf0) << (12 - 4)); //limit
+ /* io range allocation. Limit */
+ tempreg = (nodeid & 0xf) | ((nodeid & 0x30) << (8 - 4)) | (linkn << 4)
+ | ((io_max & 0xf0) << (12 - 4));
pci_write_config32(__f1_dev, reg + 4, tempreg);
- tempreg = 3 | ((io_min & 0xf0) << (12 - 4)); //base :ISA and VGA ?
+ tempreg = 3 | ((io_min & 0xf0) << (12 - 4)); /* base: ISA and VGA ? */
pci_write_config32(__f1_dev, reg, tempreg);
}
-static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmio_min, u32 mmio_max)
+static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index,
+ u32 mmio_min, u32 mmio_max)
{
u32 tempreg;
- /* io range allocation */
- tempreg = (nodeid & 0xf) | (linkn << 4) | (mmio_max & 0xffffff00); //limit
+ /* io range allocation. Limit */
+ tempreg = (nodeid & 0xf) | (linkn << 4) | (mmio_max & 0xffffff00);
pci_write_config32(__f1_dev, reg + 4, tempreg);
tempreg = 3 | (nodeid & 0x30) | (mmio_min & 0xffffff00);
pci_write_config32(__f1_dev, reg, tempreg);
@@ -120,14 +129,14 @@ static void get_fx_dev(void)
die("Cannot find 0:0x18.[0|1]\n");
}
-static u32 f1_read_config32(unsigned reg)
+static u32 f1_read_config32(unsigned int reg)
{
if (fx_dev == 0)
get_fx_dev();
return pci_read_config32(__f1_dev, reg);
}
-static void f1_write_config32(unsigned reg, u32 value)
+static void f1_write_config32(unsigned int reg, u32 value)
{
if (fx_dev == 0)
get_fx_dev();
@@ -148,7 +157,6 @@ static void set_vga_enable_reg(u32 nodeid, u32 linkn)
static void read_resources(device_t dev)
{
-
/*
* This MMCONF resource must be reserved in the PCI domain.
* It is not honored by the coreboot resource allocator if it is in
@@ -160,7 +168,7 @@ static void read_resources(device_t dev)
static void set_resource(device_t dev, struct resource *resource, u32 nodeid)
{
resource_t rbase, rend;
- unsigned reg, link_num;
+ unsigned int reg, link_num;
char buf[50];
/* Make certain the resource has actually been set */
@@ -186,15 +194,15 @@ static void set_resource(device_t dev, struct resource *resource, u32 nodeid)
rend = resource_end(resource);
/* Get the register and link */
- reg = resource->index & 0xfff; // 4k
+ reg = resource->index & 0xfff; /* 4k */
link_num = IOINDEX_LINK(resource->index);
- if (resource->flags & IORESOURCE_IO) {
+ if (resource->flags & IORESOURCE_IO)
set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8);
- }
- else if (resource->flags & IORESOURCE_MEM) {
- set_mmio_addr_reg(nodeid, link_num, reg, (resource->index >> 24), rbase >> 8, rend >> 8); // [39:8]
- }
+ else if (resource->flags & IORESOURCE_MEM)
+ set_mmio_addr_reg(nodeid, link_num, reg,
+ (resource->index >> 24), rbase >> 8, rend >> 8);
+
resource->flags |= IORESOURCE_STORED;
snprintf(buf, sizeof(buf), " <node %x link %x>",
nodeid, link_num);
@@ -212,16 +220,16 @@ static void create_vga_resource(device_t dev)
/* find out which link the VGA card is connected,
* we only deal with the 'first' vga card */
- for (link = dev->link_list; link; link = link->next) {
+ for (link = dev->link_list ; link ; link = link->next)
if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA)
break;
- }
/* no VGA card installed */
if (link == NULL)
return;
- printk(BIOS_DEBUG, "VGA: %s link %d has VGA device\n", dev_path(dev), sblink);
+ printk(BIOS_DEBUG, "VGA: %s link %d has VGA device\n",
+ dev_path(dev), sblink);
set_vga_enable_reg(0, sblink);
}
@@ -235,15 +243,12 @@ static void set_resources(device_t dev)
create_vga_resource(dev);
/* Set each resource we have found */
- for (res = dev->resource_list; res; res = res->next) {
+ for (res = dev->resource_list ; res ; res = res->next)
set_resource(dev, res, 0);
- }
- for (bus = dev->link_list; bus; bus = bus->next) {
- if (bus->children) {
+ for (bus = dev->link_list ; bus ; bus = bus->next)
+ if (bus->children)
assign_resources(bus);
- }
- }
}
static void northbridge_init(struct device *dev)
@@ -259,11 +264,13 @@ static unsigned long acpi_fill_hest(acpi_hest_t *hest)
addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE);
if (addr != NULL)
- current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+ current += acpi_create_hest_error_source(hest, current, 0,
+ (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC);
if (addr != NULL)
- current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+ current += acpi_create_hest_error_source(hest, current, 1,
+ (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
return (unsigned long)current;
}
@@ -312,7 +319,7 @@ static unsigned long agesa_write_acpi_tables(device_t device,
ivrs = agesawrapper_getlateinitptr(PICK_IVRS);
if (ivrs != NULL) {
memcpy((void *)current, ivrs, ivrs->length);
- ivrs = (acpi_header_t *) current;
+ ivrs = (acpi_header_t *)current;
current += ivrs->length;
acpi_add_table(rsdp, ivrs);
} else {
@@ -322,10 +329,10 @@ static unsigned long agesa_write_acpi_tables(device_t device,
/* SRAT */
current = ALIGN(current, 8);
printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
- srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+ srat = (acpi_srat_t *)agesawrapper_getlateinitptr(PICK_SRAT);
if (srat != NULL) {
memcpy((void *)current, srat, srat->header.length);
- srat = (acpi_srat_t *) current;
+ srat = (acpi_srat_t *)current;
current += srat->header.length;
acpi_add_table(rsdp, srat);
} else {
@@ -335,10 +342,10 @@ static unsigned long agesa_write_acpi_tables(device_t device,
/* SLIT */
current = ALIGN(current, 8);
printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
- slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+ slit = (acpi_slit_t *)agesawrapper_getlateinitptr(PICK_SLIT);
if (slit != NULL) {
memcpy((void *)current, slit, slit->header.length);
- slit = (acpi_slit_t *) current;
+ slit = (acpi_slit_t *)current;
current += slit->header.length;
acpi_add_table(rsdp, slit);
} else {
@@ -348,31 +355,28 @@ static unsigned long agesa_write_acpi_tables(device_t device,
/* ALIB */
current = ALIGN(current, 16);
printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current);
- alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+ alib = (acpi_header_t *)agesawrapper_getlateinitptr(PICK_ALIB);
if (alib != NULL) {
memcpy((void *)current, alib, alib->length);
- alib = (acpi_header_t *) current;
+ alib = (acpi_header_t *)current;
current += alib->length;
acpi_add_table(rsdp, (void *)alib);
- }
- else {
- printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n");
+ } else {
+ printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL."
+ " Skipping.\n");
}
- /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */
- /* SSDT */
current = ALIGN(current, 16);
printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
- ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+ ssdt = (acpi_header_t *)agesawrapper_getlateinitptr(PICK_PSTATE);
if (ssdt != NULL) {
memcpy((void *)current, ssdt, ssdt->length);
- ssdt = (acpi_header_t *) current;
+ ssdt = (acpi_header_t *)current;
current += ssdt->length;
- }
- else {
+ } else {
printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n");
}
- acpi_add_table(rsdp,ssdt);
+ acpi_add_table(rsdp, ssdt);
printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
return current;
@@ -400,8 +404,8 @@ void fam15_finalize(void *chip_info)
device_t dev;
u32 value;
dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */
- pci_write_config32(dev, 0xF8, 0);
- pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
+ pci_write_config32(dev, 0xf8, 0);
+ pci_write_config32(dev, 0xfc, 5); /* TODO: move it to dsdt.asl */
/* disable No Snoop */
dev = dev_find_slot(0, PCI_DEVFN(1, 1));
@@ -412,32 +416,33 @@ void fam15_finalize(void *chip_info)
void domain_read_resources(device_t dev)
{
- unsigned reg;
+ unsigned int reg;
/* Find the already assigned resource pairs */
get_fx_dev();
- for (reg = 0x80; reg <= 0xd8; reg += 0x08) {
+ for (reg = 0x80 ; reg <= 0xd8 ; reg += 0x08) {
u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x04);
/* Is this register allocated? */
if ((base & 3) != 0) {
- unsigned nodeid, reg_link;
+ unsigned int nodeid, reg_link;
device_t reg_dev;
- if (reg < 0xc0) { // mmio
+ if (reg < 0xc0) /* mmio */
nodeid = (limit & 0xf) + (base & 0x30);
- } else { // io
+ else /* io */
nodeid = (limit & 0xf) + ((base >> 4) & 0x30);
- }
+
reg_link = (limit >> 4) & 7;
reg_dev = __f0_dev;
if (reg_dev) {
/* Reserve the resource */
struct resource *res;
- res = new_resource(reg_dev, IOINDEX(0x1000 + reg, reg_link));
- if (res) {
+ res = new_resource(reg_dev,
+ IOINDEX(0x1000 + reg,
+ reg_link));
+ if (res)
res->flags = 1;
- }
}
}
}
@@ -461,7 +466,7 @@ void domain_enable_resources(device_t dev)
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info {
- unsigned hole_startk;
+ unsigned int hole_startk;
int node_id;
};
@@ -477,7 +482,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void)
if (hole & 2) {
/* We found the hole */
mem_hole.hole_startk = (hole & (0xff << 24)) >> 10;
- mem_hole.node_id = 0; // record the node # with hole
+ mem_hole.node_id = 0; /* record the node # with hole */
}
return mem_hole;
@@ -496,13 +501,12 @@ void domain_set_resources(device_t dev)
#endif
pci_tolm = 0xffffffffUL;
- for (link = dev->link_list; link; link = link->next) {
+ for (link = dev->link_list ; link ; link = link->next)
pci_tolm = find_pci_tolm(link);
- }
mmio_basek = pci_tolm >> 10;
/* Round mmio_basek to something the processor can support */
- mmio_basek &= ~((1 << 6) -1);
+ mmio_basek &= ~((1 << 6) - 1);
/* FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M
* MMIO hole. If you fix this here, please fix amdk8, too.
@@ -511,15 +515,15 @@ void domain_set_resources(device_t dev)
mmio_basek &= ~((64 * 1024) - 1);
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
- /* if the hw mem hole is already set in raminit stage, here we will compare
- * mmio_basek and hole_basek. if mmio_basek is bigger that hole_basek and will
- * use hole_basek as mmio_basek and we don't need to reset hole.
- * otherwise We reset the hole to the mmio_basek
+ /* if the hw mem hole is already set in raminit stage, here we will
+ * compare mmio_basek and hole_basek. if mmio_basek is bigger that
+ * hole_basek and will use hole_basek as mmio_basek and we don't need
+ * to reset hole. Otherwise we reset the hole to the mmio_basek
*/
mem_hole = get_hw_mem_hole_info();
- /* Use hole_basek as mmio_basek, and we don't need to reset hole anymore */
+ /* Use hole_basek as mmio_basek, and no need to reset hole anymore */
if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) {
mmio_basek = mem_hole.hole_startk;
reset_memhole = 0;
@@ -527,22 +531,26 @@ void domain_set_resources(device_t dev)
#endif
idx = 0x10;
- for (i = 0; i < node_nums; i++) {
+ for (i = 0 ; i < node_nums ; i++) {
dram_base_mask_t d;
- resource_t basek, limitk, sizek; // 4 1T
+ resource_t basek, limitk, sizek; /* 4 1T */
d = get_dram_base_mask(i);
if (!(d.mask & 1))
continue;
- basek = ((resource_t)(d.base & 0x1fffff00)) << 9; // could overflow, we may lost 6 bit here
- limitk = ((resource_t)(((d.mask & ~1) + 0x000FF) & 0x1fffff00)) << 9 ;
+ /* could overflow, we may lose 6 bit here */
+ basek = ((resource_t)(d.base & 0x1fffff00)) << 9;
+ limitk = ((resource_t)(((d.mask & ~1) + 0x000ff)
+ & 0x1fffff00)) << 9;
sizek = limitk - basek;
/* see if we need a hole from 0xa0000 to 0xbffff */
- if ((basek < ((8 * 64) + (8 * 16))) && (sizek > ((8 * 64) + (16 * 16)))) {
- ram_resource(dev, (idx | i), basek, ((8 * 64) + (8 * 16)) - basek);
+ if ((basek < ((8 * 64) + (8 * 16))) && (sizek > ((8 * 64) +
+ (16 * 16)))) {
+ ram_resource(dev, (idx | i), basek,
+ ((8 * 64) + (8 * 16)) - basek);
idx += 0x10;
basek = (8 * 64) + (16 * 16);
sizek = limitk - ((8 * 64) + (16 * 16));
@@ -550,12 +558,13 @@ void domain_set_resources(device_t dev)
}
/* split the region to accommodate pci memory space */
- if ((basek < 4 * 1024 * 1024 ) && (limitk > mmio_basek)) {
+ if ((basek < 4 * 1024 * 1024) && (limitk > mmio_basek)) {
if (basek <= mmio_basek) {
- unsigned pre_sizek;
+ unsigned int pre_sizek;
pre_sizek = mmio_basek - basek;
- if (pre_sizek>0) {
- ram_resource(dev, (idx | i), basek, pre_sizek);
+ if (pre_sizek > 0) {
+ ram_resource(dev, (idx | i), basek,
+ pre_sizek);
idx += 0x10;
sizek -= pre_sizek;
}
@@ -563,8 +572,7 @@ void domain_set_resources(device_t dev)
}
if ((basek + sizek) <= 4 * 1024 * 1024) {
sizek = 0;
- }
- else {
+ } else {
uint64_t topmem2 = bsp_topmem2();
basek = 4 * 1024 * 1024;
sizek = topmem2 / 1024 - basek;
@@ -573,17 +581,17 @@ void domain_set_resources(device_t dev)
ram_resource(dev, (idx | i), basek, sizek);
idx += 0x10;
- printk(BIOS_DEBUG, "node %d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n",
- i, mmio_basek, basek, limitk);
+ printk(BIOS_DEBUG, "node %d: mmio_basek=%08lx, basek=%08llx,"
+ " limitk=%08llx\n", i, mmio_basek, basek,
+ limitk);
}
add_uma_resource_below_tolm(dev, 7);
- for (link = dev->link_list; link; link = link->next) {
- if (link->children) {
+ for (link = dev->link_list ; link ; link = link->next)
+ if (link->children)
assign_resources(link);
- }
- }
+
/*
* Reserve everything between A segment and 1MB:
*
@@ -594,13 +602,15 @@ void domain_set_resources(device_t dev)
reserved_ram_resource(dev, 0xc0000, 0xc0000 / KiB, 0x40000 / KiB);
}
-static void sysconf_init(device_t dev) // first node
+/* first node */
+static void sysconf_init(device_t dev)
{
- sblink = (pci_read_config32(dev, 0x64) >> 8) & 7; // don't forget sublink1
- node_nums = ((pci_read_config32(dev, 0x60) >> 4) & 7) + 1; // NodeCnt[2:0]
+ /* don't forget sublink1 */
+ sblink = (pci_read_config32(dev, 0x64) >> 8) & 7;
+ /* NodeCnt[2:0] */
+ node_nums = ((pci_read_config32(dev, 0x60) >> 4) & 7) + 1;
}
-
void cpu_bus_scan(device_t dev)
{
struct bus *cpu_bus;
@@ -620,26 +630,29 @@ void cpu_bus_scan(device_t dev)
dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0));
if (!dev_mc) {
- printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB);
+ printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB,
+ CONFIG_CDB);
die("");
}
sysconf_init(dev_mc); /* sets global node_nums */
if (node_nums != 1)
- die("node_nums != 1. This is an SOC. Something is terribly wrong.");
+ die("node_nums != 1. This is an SOC."
+ " Something is terribly wrong.");
/* Get max and actual number of cores */
pccount = cpuid_ecx(AMD_CPUID_ASIZE_PCCOUNT);
- core_max = 1 << ((pccount >> 12) & 0xF);
+ core_max = 1 << ((pccount >> 12) & 0xf);
core_nums = (pccount & 0xF);
- family = (cpuid_eax(1) >> 20) & 0xFF;
+ family = (cpuid_eax(1) >> 20) & 0xff;
cdb_dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 5));
- siblings = pci_read_config32(cdb_dev, 0x84) & 0xFF;
+ siblings = pci_read_config32(cdb_dev, 0x84) & 0xff;
- printk(BIOS_SPEW, "%s family%xh, core_max=%d, core_nums=%d, siblings=%d\n",
- dev_path(cdb_dev), 0x0f + family, core_max, core_nums, siblings);
+ printk(BIOS_SPEW, "%s family%xh, core_max=%d, core_nums=%d,"
+ " siblings=%d\n", dev_path(cdb_dev), 0x0f + family,
+ core_max, core_nums, siblings);
/*
* APIC ID calucation is tightly coupled with AGESA v5 code.
@@ -666,10 +679,11 @@ void cpu_bus_scan(device_t dev)
enable_node = cdb_dev && cdb_dev->enabled;
cpu_bus = dev->link_list;
- for (j = 0; j <= siblings; j++ ) {
+ for (j = 0 ; j <= siblings ; j++) {
apic_id = lapicid_start + j;
- printk(BIOS_SPEW, "lapicid_start 0x%x, node 0x%x, core 0x%x, apicid=0x%x\n",
- lapicid_start, node_nums, j, apic_id);
+ printk(BIOS_SPEW, "lapicid_start 0x%x, node 0x%x, core 0x%x,"
+ " apicid=0x%x\n", lapicid_start, node_nums,
+ j, apic_id);
cpu = add_cpu_device(cpu_bus, apic_id, enable_node);
if (cpu)
@@ -684,10 +698,12 @@ u32 map_oprom_vendev(u32 vendev)
{
u32 new_vendev;
new_vendev =
- ((0x100298E0 <= vendev) && (vendev <= 0x100298EF)) ? 0x100298E0 : vendev;
+ ((vendev >= 0x100298e0) && (vendev <= 0x100298ef)) ?
+ 0x100298e0 : vendev;
if (vendev != new_vendev)
- printk(BIOS_NOTICE, "Mapping PCI device %8x to %8x\n", vendev, new_vendev);
+ printk(BIOS_NOTICE, "Mapping PCI device %8x to %8x\n",
+ vendev, new_vendev);
return new_vendev;
}
diff --git a/src/soc/amd/stoneyridge/reset.c b/src/soc/amd/stoneyridge/reset.c
index e44a886382..85530256e9 100644
--- a/src/soc/amd/stoneyridge/reset.c
+++ b/src/soc/amd/stoneyridge/reset.c
@@ -18,8 +18,9 @@
#include <arch/io.h>
#include <reset.h>
+#include <soc/hudson.h>
-#define HT_INIT_CONTROL 0x6C
+#define HT_INIT_CONTROL 0x6c
#define HTIC_BIOSR_Detect (1 << 5)
@@ -40,6 +41,6 @@ void do_hard_reset(void)
* --- it only reset coherent link table,
* but not reset link freq and width
*/
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+ outb((0 << 3) | (0 << 2) | (1 << 1), SYS_RESET);
+ outb((0 << 3) | (1 << 2) | (1 << 1), SYS_RESET);
}
diff --git a/src/soc/amd/stoneyridge/sata.c b/src/soc/amd/stoneyridge/sata.c
index 32090d2963..bd013c895d 100644
--- a/src/soc/amd/stoneyridge/sata.c
+++ b/src/soc/amd/stoneyridge/sata.c
@@ -32,11 +32,11 @@ static void sata_init(struct device *dev)
#define AHCI_BASE_ADDRESS_REG 0x24
#define MISC_CONTROL_REG 0x40
#define UNLOCK_BIT (1<<0)
- #define SATA_CAPABILITIES_REG 0xFC
+ #define SATA_CAPABILITIES_REG 0xfc
#define CFG_CAP_SPM (1<<12)
- volatile u32 *ahci_ptr =
- (u32*)(pci_read_config32(dev, AHCI_BASE_ADDRESS_REG) & 0xFFFFFF00);
+ volatile u32 *ahci_ptr = (u32 *)(pci_read_config32(dev,
+ AHCI_BASE_ADDRESS_REG) & 0xffffff00);
u32 temp;
/* unlock the write-protect */
@@ -45,7 +45,8 @@ static void sata_init(struct device *dev)
pci_write_config32(dev, MISC_CONTROL_REG, temp);
/* set the SATA AHCI mode to allow port expanders */
- *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG)) |= CFG_CAP_SPM;
+ *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG))
+ |= CFG_CAP_SPM;
/* lock the write-protect */
temp = pci_read_config32(dev, MISC_CONTROL_REG);
diff --git a/src/soc/amd/stoneyridge/sd.c b/src/soc/amd/stoneyridge/sd.c
index 484dee4227..7188aad55f 100644
--- a/src/soc/amd/stoneyridge/sd.c
+++ b/src/soc/amd/stoneyridge/sd.c
@@ -25,27 +25,26 @@ static void sd_init(struct device *dev)
{
u32 stepping;
- stepping = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x18, 3)), 0xFC);
+ stepping = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x18, 3)),
+ 0xfc);
struct soc_amd_stoneyridge_config *sd_chip =
(struct soc_amd_stoneyridge_config *)(dev->chip_info);
if (sd_chip->sd_mode == 3) { /* SD 3.0 mode */
- pci_write_config32(dev, 0xA4, 0x31FEC8B2);
- pci_write_config32(dev, 0xA8, 0x00002503);
- pci_write_config32(dev, 0xB0, 0x02180C19);
- pci_write_config32(dev, 0xD0, 0x0000078B);
- }
- else { /* SD 2.0 mode */
- if ((stepping & 0x0000000F) == 0) { /* Stepping A0 */
- pci_write_config32(dev, 0xA4, 0x31DE32B2);
- pci_write_config32(dev, 0xB0, 0x01180C19);
- pci_write_config32(dev, 0xD0, 0x0000058B);
- }
- else { /* Stepping >= A1 */
- pci_write_config32(dev, 0xA4, 0x31FE3FB2);
- pci_write_config32(dev, 0xB0, 0x01180C19);
- pci_write_config32(dev, 0xD0, 0x0000078B);
+ pci_write_config32(dev, 0xa4, 0x31fec8b2);
+ pci_write_config32(dev, 0xa8, 0x00002503);
+ pci_write_config32(dev, 0xb0, 0x02180c19);
+ pci_write_config32(dev, 0xd0, 0x0000078b);
+ } else { /* SD 2.0 mode */
+ if ((stepping & 0x0000000f) == 0) { /* Stepping A0 */
+ pci_write_config32(dev, 0xa4, 0x31de32b2);
+ pci_write_config32(dev, 0xb0, 0x01180c19);
+ pci_write_config32(dev, 0xd0, 0x0000058b);
+ } else { /* Stepping >= A1 */
+ pci_write_config32(dev, 0xa4, 0x31fe3fb2);
+ pci_write_config32(dev, 0xb0, 0x01180c19);
+ pci_write_config32(dev, 0xd0, 0x0000078b);
}
}
}
diff --git a/src/soc/amd/stoneyridge/smbus.c b/src/soc/amd/stoneyridge/smbus.c
index e890c470a9..aef3edf5e6 100644
--- a/src/soc/amd/stoneyridge/smbus.c
+++ b/src/soc/amd/stoneyridge/smbus.c
@@ -13,9 +13,6 @@
* GNU General Public License for more details.
*/
-#ifndef _STONEYRIDGE_SMBUS_C_
-#define _STONEYRIDGE_SMBUS_C_
-
#include <io.h>
#include <stdint.h>
#include <soc/smbus.h>
@@ -45,11 +42,10 @@ static int smbus_wait_until_done(u32 smbus_io_base)
val = inb(smbus_io_base + SMBHSTSTAT);
val &= 0x1f; /* mask off reserved bits */
- if (val & 0x1c) {
+ if (val & 0x1c)
return -5; /* error */
- }
if (val == 0x02) {
- outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */
+ outb(val, smbus_io_base + SMBHSTSTAT); /* clear sts */
return 0;
}
} while (--loops);
@@ -60,22 +56,20 @@ int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
{
u8 byte;
- if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ if (smbus_wait_until_ready(smbus_io_base) < 0)
return -2; /* not ready */
- }
/* set the device I'm talking too */
outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
byte = inb(smbus_io_base + SMBHSTCTRL);
byte &= 0xe3; /* Clear [4:2] */
- byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ byte |= (1 << 2) | (1 << 6); /* Byte data R/W cmd, start the command */
outb(byte, smbus_io_base + SMBHSTCTRL);
/* poll for transaction completion */
- if (smbus_wait_until_done(smbus_io_base) < 0) {
+ if (smbus_wait_until_done(smbus_io_base) < 0)
return -3; /* timeout or error */
- }
/* read results of transaction */
byte = inb(smbus_io_base + SMBHSTCMD);
@@ -87,9 +81,8 @@ int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
{
u8 byte;
- if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ if (smbus_wait_until_ready(smbus_io_base) < 0)
return -2; /* not ready */
- }
/* set the command... */
outb(val, smbus_io_base + SMBHSTCMD);
@@ -99,13 +92,12 @@ int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
byte = inb(smbus_io_base + SMBHSTCTRL);
byte &= 0xe3; /* Clear [4:2] */
- byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ byte |= (1 << 2) | (1 << 6); /* Byte data R/W cmd, start command */
outb(byte, smbus_io_base + SMBHSTCTRL);
/* poll for transaction completion */
- if (smbus_wait_until_done(smbus_io_base) < 0) {
+ if (smbus_wait_until_done(smbus_io_base) < 0)
return -3; /* timeout or error */
- }
return 0;
}
@@ -115,9 +107,8 @@ int do_smbus_read_byte(u32 smbus_io_base, u32 device,
{
u8 byte;
- if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ if (smbus_wait_until_ready(smbus_io_base) < 0)
return -2; /* not ready */
- }
/* set the command/address... */
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
@@ -127,13 +118,12 @@ int do_smbus_read_byte(u32 smbus_io_base, u32 device,
byte = inb(smbus_io_base + SMBHSTCTRL);
byte &= 0xe3; /* Clear [4:2] */
- byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ byte |= (1 << 3) | (1 << 6); /* Byte data R/W cmd, start command */
outb(byte, smbus_io_base + SMBHSTCTRL);
/* poll for transaction completion */
- if (smbus_wait_until_done(smbus_io_base) < 0) {
+ if (smbus_wait_until_done(smbus_io_base) < 0)
return -3; /* timeout or error */
- }
/* read results of transaction */
byte = inb(smbus_io_base + SMBHSTDAT0);
@@ -146,9 +136,8 @@ int do_smbus_write_byte(u32 smbus_io_base, u32 device,
{
u8 byte;
- if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ if (smbus_wait_until_ready(smbus_io_base) < 0)
return -2; /* not ready */
- }
/* set the command/address... */
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
@@ -161,13 +150,12 @@ int do_smbus_write_byte(u32 smbus_io_base, u32 device,
byte = inb(smbus_io_base + SMBHSTCTRL);
byte &= 0xe3; /* Clear [4:2] */
- byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ byte |= (1 << 3) | (1 << 6); /* Byte data R/W cmd, start command */
outb(byte, smbus_io_base + SMBHSTCTRL);
/* poll for transaction completion */
- if (smbus_wait_until_done(smbus_io_base) < 0) {
+ if (smbus_wait_until_done(smbus_io_base) < 0)
return -3; /* timeout or error */
- }
return 0;
}
@@ -188,8 +176,11 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr,
tmp &= ~mask;
tmp |= val;
- /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */
- outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ // printk(BIOS_DEBUG, "about write %x, index=%x", tmp,
+ // (reg_space&0x3)<<29 | reg_addr);
+
+ /* probably we dont have to do it again. */
+ outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);
outl(tmp, AB_DATA);
outl(0, AB_INDX);
}
@@ -210,8 +201,11 @@ void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port,
tmp &= ~mask;
tmp |= val;
- //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr);
- outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ //printk(BIOS_DEBUG, "about write %x, index=%x", tmp,
+ // (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr);
+
+ /* probably we dont have to do it again. */
+ outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);
outl(tmp, AB_DATA);
outl(0, AB_INDX);
}
@@ -219,8 +213,7 @@ void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port,
/* space = 0: AX_INDXC, AX_DATAC
* space = 1: AX_INDXP, AX_DATAP
*/
-void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
- u32 mask, u32 val)
+void alink_ax_indx(u32 space /*c or p? */, u32 axindc, u32 mask, u32 val)
{
u32 tmp;
@@ -243,4 +236,3 @@ void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
outl(tmp, AB_DATA);
outl(0, AB_INDX);
}
-#endif
diff --git a/src/soc/amd/stoneyridge/smbus_spd.c b/src/soc/amd/stoneyridge/smbus_spd.c
index 863631a586..73e67024c8 100644
--- a/src/soc/amd/stoneyridge/smbus_spd.c
+++ b/src/soc/amd/stoneyridge/smbus_spd.c
@@ -20,39 +20,42 @@
#include <Porting.h>
#include <AGESA.h>
#include <amdlib.h>
+#include <soc/hudson.h>
#include <dimmSpd.h>
/*-----------------------------------------------------------------------------
*
* readSmbusByteData - read a single SPD byte from any offset
*/
-
-static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+static int readSmbusByteData(int iobase, int address, char *buffer, int offset)
{
unsigned int status;
UINT64 limit;
address |= 1; // set read bit
- __outbyte (iobase + 0, 0xFF); // clear error status
- __outbyte (iobase + 1, 0x1F); // clear error status
- __outbyte (iobase + 3, offset); // offset in eeprom
- __outbyte (iobase + 4, address); // slave address and read bit
- __outbyte (iobase + 2, 0x48); // read byte command
-
- // time limit to avoid hanging for unexpected error status (should never happen)
- limit = __rdtsc () + 2000000000 / 10;
- for (;;)
- {
- status = __inbyte (iobase);
- if (__rdtsc () > limit) break;
- if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ __outbyte(iobase + 0, 0xff); // clear error status
+ __outbyte(iobase + 1, 0x1f); // clear error status
+ __outbyte(iobase + 3, offset); // offset in eeprom
+ __outbyte(iobase + 4, address); // slave address and read bit
+ __outbyte(iobase + 2, 0x48); // read byte command
+
+ // time limit to avoid hanging for unexpected error status
+ limit = __rdtsc() + 2000000000 / 10;
+ for (;;) {
+ status = __inbyte(iobase);
+ if (__rdtsc() > limit)
+ break;
+ if ((status & 2) == 0)
+ continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1)
+ continue; // HostBusy set, keep waiting
break;
}
- buffer [0] = __inbyte (iobase + 5);
- if (status == 2) status = 0; // check for done with no errors
+ buffer[0] = __inbyte(iobase + 5);
+ if (status == 2)
+ status = 0; // check for done with no errors
return status;
}
@@ -61,28 +64,30 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
* readSmbusByte - read a single SPD byte from the default offset
* this function is faster function readSmbusByteData
*/
-
-static int readSmbusByte (int iobase, int address, char *buffer)
+static int readSmbusByte(int iobase, int address, char *buffer)
{
unsigned int status;
UINT64 limit;
- __outbyte (iobase + 0, 0xFF); // clear error status
- __outbyte (iobase + 2, 0x44); // read command
+ __outbyte(iobase + 0, 0xff); // clear error status
+ __outbyte(iobase + 2, 0x44); // read command
// time limit to avoid hanging for unexpected error status
- limit = __rdtsc () + 2000000000 / 10;
- for (;;)
- {
- status = __inbyte (iobase);
- if (__rdtsc () > limit) break;
- if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ limit = __rdtsc() + 2000000000 / 10;
+ for (;;) {
+ status = __inbyte(iobase);
+ if (__rdtsc() > limit)
+ break;
+ if ((status & 2) == 0)
+ continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1)
+ continue; // HostBusy set, keep waiting
break;
}
- buffer [0] = __inbyte (iobase + 5);
- if (status == 2) status = 0; // check for done with no errors
+ buffer[0] = __inbyte(iobase + 5);
+ if (status == 2)
+ status = 0; // check for done with no errors
return status;
}
@@ -94,17 +99,16 @@ static int readSmbusByte (int iobase, int address, char *buffer)
* sending offset for every byte.
* Reads 128 bytes in 7-8 ms at 400 KHz.
*/
-
-static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+static int readspd(int iobase, int SmbusSlaveAddress, char *buffer, int count)
{
int index, error;
printk(BIOS_SPEW, "-------------READING SPD-----------\n");
printk(BIOS_SPEW, "iobase: 0x%08X, SmbusSlave: 0x%08X, count: %d\n",
- iobase, SmbusSlaveAddress, count);
+ iobase, SmbusSlaveAddress, count);
/* read the first byte using offset zero */
- error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+ error = readSmbusByteData(iobase, SmbusSlaveAddress, buffer, 0);
if (error) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
@@ -112,9 +116,9 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
}
/* read the remaining bytes using auto-increment for speed */
- for (index = 1; index < count; index++)
- {
- error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
+ for (index = 1 ; index < count ; index++) {
+ error = readSmbusByte(iobase, SmbusSlaveAddress,
+ &buffer[index]);
if (error) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;
@@ -126,22 +130,23 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
return 0;
}
-static void writePmReg (int reg, int data)
+static void writePmReg(int reg, int data)
{
- __outbyte (0xCD6, reg);
- __outbyte (0xCD7, data);
+ __outbyte(PM_INDEX, reg);
+ __outbyte(PM_DATA, data);
}
-static void setupFch (int ioBase)
+static void setupFch(int ioBase)
{
- writePmReg (0x2D, ioBase >> 8);
- writePmReg (0x2C, ioBase | 1);
- __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
+ writePmReg(0x2d, ioBase >> 8);
+ writePmReg(0x2c, ioBase | 1);
+ /* set SMBus clock to 400 KHz */
+ __outbyte(ioBase + 0x0e, 66000000 / 400000 / 4);
}
int hudson_readSpd(int spdAddress, char *buf, size_t len)
{
- int ioBase = 0xB00;
- setupFch (ioBase);
- return readspd (ioBase, spdAddress, buf, len);
+ int ioBase = 0xb00;
+ setupFch(ioBase);
+ return readspd(ioBase, spdAddress, buf, len);
}
diff --git a/src/soc/amd/stoneyridge/smihandler.c b/src/soc/amd/stoneyridge/smihandler.c
index cf95418b7c..5a646a69f2 100644
--- a/src/soc/amd/stoneyridge/smihandler.c
+++ b/src/soc/amd/stoneyridge/smihandler.c
@@ -110,7 +110,8 @@ static void process_smi_0x90(void)
smi_write32(0x90, status);
}
-void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+void southbridge_smi_handler(unsigned int node,
+ smm_state_save_area_t *state_save)
{
const uint16_t smi_src = smi_read16(0x94);
diff --git a/src/soc/amd/stoneyridge/uart.c b/src/soc/amd/stoneyridge/uart.c
index 5d88204f33..7919207175 100644
--- a/src/soc/amd/stoneyridge/uart.c
+++ b/src/soc/amd/stoneyridge/uart.c
@@ -14,10 +14,11 @@
*/
#include <console/uart.h>
+#include <soc/hudson.h>
uintptr_t uart_platform_base(int idx)
{
- return (uintptr_t)(0xFEDC6000 + 0x2000 * (idx & 1));
+ return (uintptr_t)(APU_UART0_BASE + 0x2000 * (idx & 1));
}
unsigned int uart_platform_refclk(void)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 17:31:32 +0000