mb/google/trulo/var/orisa: Enable HDA Codec ALC256

We use ALC256 as HDA codec on orisa. Add verb table and the
related device tree changes for HDA related registers.

BUG=b:338523452
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot

Change-Id: I92051886341bd317cce6061ece83439d156b0f90
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82719
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>

4 files changed, 147 insertions, 0 deletions

diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig
index 008ebb3753..37897165f7 100644
--- a/src/mainboard/google/brya/Kconfig
+++ b/src/mainboard/google/brya/Kconfig
@@ -374,6 +374,7 @@ config BOARD_GOOGLE_OMNIGUL
 
 config BOARD_GOOGLE_ORISA
 	select BOARD_GOOGLE_BASEBOARD_TRULO
+	select SOC_INTEL_COMMON_BLOCK_HDA_VERB
 
 config BOARD_GOOGLE_OSIRIS
 	select BOARD_GOOGLE_BASEBOARD_BRYA
diff --git a/src/mainboard/google/brya/variants/orisa/Makefile.mk b/src/mainboard/google/brya/variants/orisa/Makefile.mk
index 4c33dad4db..cc61780e02 100644
--- a/src/mainboard/google/brya/variants/orisa/Makefile.mk
+++ b/src/mainboard/google/brya/variants/orisa/Makefile.mk
@@ -4,3 +4,4 @@ bootblock-y += gpio.c
 romstage-y += gpio.c
 romstage-y += memory.c
 ramstage-y += gpio.c
+ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB) += hda_verb.c
diff --git a/src/mainboard/google/brya/variants/orisa/hda_verb.c b/src/mainboard/google/brya/variants/orisa/hda_verb.c
new file mode 100644
index 0000000000..bf998e1f0c
--- /dev/null
+++ b/src/mainboard/google/brya/variants/orisa/hda_verb.c
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+	/* coreboot specific header */
+	0x10ec0256,	// Codec Vendor / Device ID: Realtek ALC256
+	0x10ec12ac,	// Subsystem ID
+	0x00000013,	// Number of jacks (NID entries)
+
+	AZALIA_RESET(0x1),
+	/* NID 0x01, HDA Codec Subsystem ID Verb table */
+	AZALIA_SUBVENDOR(0, 0x10ec12ac),
+
+	/* Pin Widget Verb Table */
+
+	/*
+	 * DMIC
+	 * Requirement is to use PCH DMIC. Hence,
+	 * commented out codec's Internal DMIC.
+	 * AZALIA_PIN_CFG(0, 0x12, 0x90A60130),
+	 * AZALIA_PIN_CFG(0, 0x13, 0x40000000),
+	 */
+
+	/* Pin widget 0x14 - Front (Port-D) */
+	AZALIA_PIN_CFG(0, 0x14, 0x90170110),
+	/* Pin widget 0x18 - NPC */
+	AZALIA_PIN_CFG(0, 0x18, 0x411111F0),
+	/* Pin widget 0x19 - MIC2 (Port-F) */
+	AZALIA_PIN_CFG(0, 0x19, 0x04A11040),
+	/* Pin widget 0x1A - LINE1 (Port-C) */
+	AZALIA_PIN_CFG(0, 0x1a, 0x411111F0),
+	/* Pin widget 0x1B - NPC */
+	AZALIA_PIN_CFG(0, 0x1b, 0x411111F0),
+	/* Pin widget 0x1D - BEEP-IN */
+	AZALIA_PIN_CFG(0, 0x1d, 0x40610041),
+	/* Pin widget 0x1E - NPC */
+	AZALIA_PIN_CFG(0, 0x1e, 0x411111F0),
+	/* Pin widget 0x21 - HP1-OUT (Port-I) */
+	AZALIA_PIN_CFG(0, 0x21, 0x04211020),
+	/*
+	 * Widget node 0x20 - 1
+	 * Codec hidden reset and speaker power 2W/4ohm
+	 */
+	0x0205001A,
+	0x0204C003,
+	0x02050038,
+	0x02047901,
+	/*
+	 * Widget node 0x20 - 2
+	 * Class D power on Reset
+	 */
+	0x0205003C,
+	0x02040354,
+	0x0205003C,
+	0x02040314,
+	/*
+	 * Widget node 0x20 - 3
+	 * Disable AGC and set AGC limit to -1.5dB
+	 */
+	0x02050016,
+	0x02040C50,
+	0x02050012,
+	0x0204EBC1,
+	/*
+	 * Widget node 0x20 - 4
+	 * Set AGC Post gain +1.5dB then Enable AGC
+	 */
+	0x02050013,
+	0x02044023,
+	0x02050016,
+	0x02040E50,
+	/*
+	 * Widget node 0x20 - 5
+	 * Silence detector enabling + Set EAPD to verb control
+	 */
+	0x02050037,
+	0x0204FE15,
+	0x02050010,
+	0x02040020,
+	/*
+	 * Widget node 0x20 - 6
+	 * Silence data mode Threshold (-90dB)
+	 */
+	0x02050030,
+	0x0204A000,
+	0x0205001B,
+	0x02040A4B,
+	/*
+	 * Widget node 0x20 - 7
+	 * Default setting - 1
+	 */
+	0x05750003,
+	0x05740DA3,
+	0x02050046,
+	0x02040004,
+	/*
+	 * Widget node 0x20 - 8
+	 * support 1 pin detect two port
+	 */
+	0x02050009,
+	0x0204E003,
+	0x0205000A,
+	0x02047770,
+	/*
+	 * Widget node 0x20 - 9
+	 * To set LDO1/LDO2 as default (used for headset)
+	 */
+	0x02050008,
+	0x02046A0C,
+	0x02050008,
+	0x02046A0C,
+};
+
+const u32 pc_beep_verbs[] = {
+	/* Dos beep path - 1 */
+	0x01470C00,
+	0x02050036,
+	0x02047151,
+	0x01470740,
+	/* Dos beep path - 2 */
+	0x0143b000,
+	0x01470C02,
+	0x01470C02,
+	0x01470C02,
+};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/google/brya/variants/orisa/overridetree.cb b/src/mainboard/google/brya/variants/orisa/overridetree.cb
index 63bff0e066..642722259f 100644
--- a/src/mainboard/google/brya/variants/orisa/overridetree.cb
+++ b/src/mainboard/google/brya/variants/orisa/overridetree.cb
@@ -91,6 +91,15 @@ chip soc/intel/alderlake
 	# Bit 1,3 - AUX lines are not swapped on the motherboard for either C0 or C1.
 	register "tcss_aux_ori" = "0"
 
+	# HD Audio
+	register "pch_hda_dsp_enable" = "1"
+	register "pch_hda_sdi_enable[0]" = "1"
+	register "pch_hda_sdi_enable[1]" = "1"
+	register "pch_hda_audio_link_hda_enable" = "1"
+	register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
+	register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
+	register "pch_hda_idisp_codec_enable" = "1"
+
 	# Configure external V1P05/Vnn/VnnSx Rails
 	register "ext_fivr_settings" = "{
 		.configure_ext_fivr = 1,
@@ -527,5 +536,13 @@ chip soc/intel/alderlake
 				end
 			end
 		end
+		device ref hda on
+			chip drivers/sof
+				register "spkr_tplg" = "max98360a"
+				register "jack_tplg" = "rt5682"
+				register "mic_tplg" = "_2ch_pdm0"
+				device generic 0 on end
+			end
+		end
 	end
 end