src/{drivers,soc}: Fix some code indents

Change-Id: I55682de4a1bc74f170e2044de35b0d8d53ef51ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>

6 files changed, 11 insertions, 11 deletions

diff --git a/src/drivers/amd/agesa/mtrr_fixme.c b/src/drivers/amd/agesa/mtrr_fixme.c
index a880ce7e01..c589553698 100644
--- a/src/drivers/amd/agesa/mtrr_fixme.c
+++ b/src/drivers/amd/agesa/mtrr_fixme.c
@@ -20,7 +20,7 @@ static void set_range_uc(u32 base, u32 size)
 	for (i = 0; i < max_var_mtrrs; i++) {
 		msr = rdmsr(MTRR_PHYS_MASK(i));
 		if (!(msr.lo & MTRR_PHYS_MASK_VALID))
-				break;
+			break;
 	}
 	if (i == max_var_mtrrs)
 		die("Run out of unused MTRRs\n");
diff --git a/src/drivers/net/ne2k.c b/src/drivers/net/ne2k.c
index 971f31dd83..635315b359 100644
--- a/src/drivers/net/ne2k.c
+++ b/src/drivers/net/ne2k.c
@@ -84,7 +84,7 @@ static void eth_pio_write(unsigned char *src, unsigned int dst, unsigned int cnt
 	outb(D8390_COMMAND_RD1 | D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
 
 	while (cnt--) {
-			outb(*(src++), eth_nic_base + NE_ASIC_OFFSET + NE_DATA);
+		outb(*(src++), eth_nic_base + NE_ASIC_OFFSET + NE_DATA);
 	}
 	/*
 	#warning "Add timeout"
diff --git a/src/soc/intel/baytrail/sata.c b/src/soc/intel/baytrail/sata.c
index 24c805ac81..5e5215b249 100644
--- a/src/soc/intel/baytrail/sata.c
+++ b/src/soc/intel/baytrail/sata.c
@@ -71,7 +71,7 @@ static void sata_init(struct device *dev)
 	pci_write_config16(dev, 0x92, reg16);
 
 	if (config->sata_ahci) {
-	  u8 *abar = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5);
+		u8 *abar = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5);
 
 		/* Enable CR memory space decoding */
 		reg16 = pci_read_config16(dev, 0x04);
diff --git a/src/soc/intel/braswell/ramstage.c b/src/soc/intel/braswell/ramstage.c
index 48f2193e47..42d1f9f080 100644
--- a/src/soc/intel/braswell/ramstage.c
+++ b/src/soc/intel/braswell/ramstage.c
@@ -68,11 +68,11 @@ static void fill_in_pattrs(void)
 	dev = pcidev_on_root(LPC_DEV, LPC_FUNC);
 	attrs->revid = pci_read_config8(dev, REVID);
 	/* The revision to stepping IDs have two values per metal stepping. */
-    if (attrs->revid >= RID_D_STEPPING_START) {
+	if (attrs->revid >= RID_D_STEPPING_START) {
 		attrs->stepping = (attrs->revid - RID_D_STEPPING_START) / 2;
 		attrs->stepping += STEP_D1;
 
-    } else if (attrs->revid >= RID_C_STEPPING_START) {
+	} else if (attrs->revid >= RID_C_STEPPING_START) {
 		attrs->stepping = (attrs->revid - RID_C_STEPPING_START) / 2;
 		attrs->stepping += STEP_C0;
 
diff --git a/src/soc/mediatek/mt8173/dramc_pi_basic_api.c b/src/soc/mediatek/mt8173/dramc_pi_basic_api.c
index 23a9403acf..10d03e0c8e 100644
--- a/src/soc/mediatek/mt8173/dramc_pi_basic_api.c
+++ b/src/soc/mediatek/mt8173/dramc_pi_basic_api.c
@@ -828,7 +828,7 @@ u32 dramc_engine2(u32 channel, enum dram_tw_op wr, u32 test2_1, u32 test2_2,
 
 	/* 4. enable read/write test */
 	if (wr == TE_OP_READ_CHECK) {
-			if ((testaudpat == 1) || (testaudpat == 2)) {
+		if ((testaudpat == 1) || (testaudpat == 2)) {
 			/* if audio pattern, enable read only */
 			/* (disable write after read), */
 			/* AUDMODE=0x48[15]=0 */
diff --git a/src/soc/samsung/exynos5420/dp.c b/src/soc/samsung/exynos5420/dp.c
index 758e09b05d..13a8feff41 100644
--- a/src/soc/samsung/exynos5420/dp.c
+++ b/src/soc/samsung/exynos5420/dp.c
@@ -336,8 +336,8 @@ static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable)
 	ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET,
 			data);
 	if (ret != EXYNOS_DP_SUCCESS) {
-			printk(BIOS_ERR, "DP write_to_dpcd failed\n");
-			return -1;
+		printk(BIOS_ERR, "DP write_to_dpcd failed\n");
+		return -1;
 
 	}
 
@@ -467,9 +467,9 @@ static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
 
 	ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
 	if (ret != EXYNOS_DP_SUCCESS) {
-			printk(BIOS_ERR, "DP read lane status failed\n");
-			edp_info->lt_info.lt_status = DP_LT_FAIL;
-			return ret;
+		printk(BIOS_ERR, "DP read lane status failed\n");
+		edp_info->lt_info.lt_status = DP_LT_FAIL;
+		return ret;
 	}
 
 	if (lane_stat & DP_LANE_STAT_CR_DONE) {