summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorEdwin Beasant <edwin_beasant@virtensys.com>2010-02-09 10:22:33 +0000
committerPatrick Georgi <patrick.georgi@coresystems.de>2010-02-09 10:22:33 +0000
commite30db0e37034f6698eced00727b6ad0ba3fc5c7b (patch)
tree8bfb03dcb7f3b161772f1099bd62240463684d4d
parent37d8c215a27f3c7938e921ccb849a9b8fa01be77 (diff)
Port of CS5536 early UART setup from v3.
Permit early setup of COM2 Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/amd/norwich/romstage.c2
-rw-r--r--src/mainboard/olpc/btest/romstage.c2
-rw-r--r--src/mainboard/olpc/rev_a/romstage.c2
-rw-r--r--src/southbridge/amd/cs5536/cs5536.c84
-rw-r--r--src/southbridge/amd/cs5536/cs5536_early_setup.c75
5 files changed, 117 insertions, 48 deletions
diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c
index fc7e96b342..19c5b17ade 100644
--- a/src/mainboard/amd/norwich/romstage.c
+++ b/src/mainboard/amd/norwich/romstage.c
@@ -115,7 +115,7 @@ void cache_as_ram_main(void)
* up later...
*/
/* If debug. real setup done in chipset init via Config.lb. */
- cs5536_setup_onchipuart();
+ cs5536_setup_onchipuart(1);
mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/olpc/btest/romstage.c b/src/mainboard/olpc/btest/romstage.c
index 21363b7199..fa75b20c1d 100644
--- a/src/mainboard/olpc/btest/romstage.c
+++ b/src/mainboard/olpc/btest/romstage.c
@@ -177,7 +177,7 @@ static void main(unsigned long bist)
* it is counting on some early MSR setup
* for cs5536
*/
- cs5536_setup_onchipuart();
+ cs5536_setup_onchipuart(1);
gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/olpc/rev_a/romstage.c b/src/mainboard/olpc/rev_a/romstage.c
index 21363b7199..fa75b20c1d 100644
--- a/src/mainboard/olpc/rev_a/romstage.c
+++ b/src/mainboard/olpc/rev_a/romstage.c
@@ -177,7 +177,7 @@ static void main(unsigned long bist)
* it is counting on some early MSR setup
* for cs5536
*/
- cs5536_setup_onchipuart();
+ cs5536_setup_onchipuart(1);
gpio_init();
uart_init();
console_init();
diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c
index 474424bba6..905d71f052 100644
--- a/src/southbridge/amd/cs5536/cs5536.c
+++ b/src/southbridge/amd/cs5536/cs5536.c
@@ -247,38 +247,45 @@ static void lpc_init(struct southbridge_amd_cs5536_config *sb)
isa_dma_init();
}
+
+/**
+ * Depending on settings in the config struct, enable COM1 or COM2 or both.
+ *
+ * If the enable is NOT set, the UARTs are explicitly disabled, which is
+ * required if (e.g.) there is a Super I/O attached that does COM1 or COM2.
+ *
+ * @param sb Southbridge config structure.
+ */
static void uarts_init(struct southbridge_amd_cs5536_config *sb)
{
msr_t msr;
- uint16_t addr;
- uint32_t gpio_addr;
+ u16 addr = 0;
+ u32 gpio_addr;
device_t dev;
-
+
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_ISA, 0);
gpio_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1);
- gpio_addr &= ~1; /* clear IO bit */
- printk_debug("GPIO_ADDR: %08X\n", gpio_addr);
+ gpio_addr &= ~1; /* Clear I/O bit */
+ printk(BIOS_DEBUG, "GPIO_ADDR: %08X\n", gpio_addr);
- /* This could be extended to support IR modes */
+ /* This could be extended to support IR modes. */
/* COM1 */
if (sb->com1_enable) {
- /* Set the address */
+ printk(BIOS_SPEW, "uarts_init: enable COM1\n");
+ /* Set the address. */
switch (sb->com1_address) {
case 0x3F8:
addr = 7;
break;
-
case 0x3E8:
addr = 6;
break;
-
case 0x2F8:
addr = 5;
break;
-
case 0x2E8:
addr = 4;
break;
@@ -287,13 +294,13 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
msr.lo |= addr << 16;
wrmsr(MDD_LEG_IO, msr);
- /* Set the IRQ */
+ /* Set the IRQ. */
msr = rdmsr(MDD_IRQM_YHIGH);
msr.lo |= sb->com1_irq << 24;
wrmsr(MDD_IRQM_YHIGH, msr);
/* GPIO8 - UART1_TX */
- /* Set: Output Enable (0x4) */
+ /* Set: Output Enable (0x4) */
outl(GPIOL_8_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
/* Set: OUTAUX1 Select (0x10) */
outl(GPIOL_8_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
@@ -301,28 +308,31 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
/* GPIO9 - UART1_RX */
/* Set: Input Enable (0x20) */
outl(GPIOL_9_SET, gpio_addr + GPIOL_INPUT_ENABLE);
- /* Set: INAUX1 Select (0x34) */
+ /* Set: INAUX1 Select (0x34) */
outl(GPIOL_9_SET, gpio_addr + GPIOL_IN_AUX1_SELECT);
- /* Set: GPIO 8 + 9 Pull Up (0x18) */
+ /* Set: GPIO 8 + 9 Pull Up (0x18) */
outl(GPIOL_8_SET | GPIOL_9_SET,
gpio_addr + GPIOL_PULLUP_ENABLE);
- /* enable COM1 */
- /* Bit 1 = device enable Bit 4 = allow access to the upper banks */
+ /* Enable COM1.
+ *
+ * Bit 1 = device enable
+ * Bit 4 = allow access to the upper banks
+ */
msr.lo = (1 << 4) | (1 << 1);
msr.hi = 0;
wrmsr(MDD_UART1_CONF, msr);
-
} else {
- /* Reset and disable COM1 */
+ /* Reset and disable COM1. */
+ printk(BIOS_SPEW, "uarts_init: disable COM1\n");
msr = rdmsr(MDD_UART1_CONF);
- msr.lo = 1; // reset
+ msr.lo = 1; /* Reset */
wrmsr(MDD_UART1_CONF, msr);
- msr.lo = 0; // disabled
+ msr.lo = 0; /* Disabled */
wrmsr(MDD_UART1_CONF, msr);
- /* Disable the IRQ */
+ /* Disable the IRQ. */
msr = rdmsr(MDD_LEG_IO);
msr.lo &= ~(0xF << 16);
wrmsr(MDD_LEG_IO, msr);
@@ -330,19 +340,17 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
/* COM2 */
if (sb->com2_enable) {
+ printk(BIOS_SPEW, "uarts_init: enable COM2\n");
switch (sb->com2_address) {
case 0x3F8:
addr = 7;
break;
-
case 0x3E8:
addr = 6;
break;
-
case 0x2F8:
addr = 5;
break;
-
case 0x2E8:
addr = 4;
break;
@@ -350,11 +358,13 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
msr = rdmsr(MDD_LEG_IO);
msr.lo |= addr << 20;
wrmsr(MDD_LEG_IO, msr);
+ printk(BIOS_SPEW, "uarts_init: wrote COM2 address 0x%x\n", sb->com2_address);
- /* Set the IRQ */
+ /* Set the IRQ. */
msr = rdmsr(MDD_IRQM_YHIGH);
msr.lo |= sb->com2_irq << 28;
wrmsr(MDD_IRQM_YHIGH, msr);
+ printk(BIOS_SPEW, "uarts_init: set COM2 irq\n");
/* GPIO3 - UART2_RX */
/* Set: Input Enable (0x20) */
@@ -365,34 +375,42 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
/* GPIO4 - UART2_TX */
/* Set: Output Enable (0x4) */
outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE);
+ printk(BIOS_SPEW, "uarts_init: set output enable\n");
/* Set: OUTAUX1 Select (0x10) */
outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT);
+ printk(BIOS_SPEW, "uarts_init: set OUTAUX1\n");
- /* Set: GPIO 3 and 4 Pull Up (0x18) */
+ /* Set: GPIO 3 + 4 Pull Up (0x18) */
outl(GPIOL_3_SET | GPIOL_4_SET,
gpio_addr + GPIOL_PULLUP_ENABLE);
+ printk(BIOS_SPEW, "uarts_init: set pullup COM2\n");
- /* enable COM2 */
- /* Bit 1 = device enable Bit 4 = allow access to the upper banks */
+ /* Enable COM2.
+ *
+ * Bit 1 = device enable
+ * Bit 4 = allow access to the upper banks
+ */
msr.lo = (1 << 4) | (1 << 1);
msr.hi = 0;
wrmsr(MDD_UART2_CONF, msr);
-
+ printk(BIOS_SPEW, "uarts_init: COM2 enabled\n");
} else {
- /* Reset and disable COM2 */
+ printk(BIOS_SPEW, "uarts_init: disable COM2\n");
+ /* Reset and disable COM2. */
msr = rdmsr(MDD_UART2_CONF);
- msr.lo = 1; // reset
+ msr.lo = 1; /* Reset */
wrmsr(MDD_UART2_CONF, msr);
- msr.lo = 0; // disabled
+ msr.lo = 0; /* Disabled */
wrmsr(MDD_UART2_CONF, msr);
- /* Disable the IRQ */
+ /* Disable the IRQ. */
msr = rdmsr(MDD_LEG_IO);
msr.lo &= ~(0xF << 20);
wrmsr(MDD_LEG_IO, msr);
}
}
+
#define HCCPARAMS 0x08
#define IPREG04 0xA0
#define USB_HCCPW_SET (1 << 1)
diff --git a/src/southbridge/amd/cs5536/cs5536_early_setup.c b/src/southbridge/amd/cs5536/cs5536_early_setup.c
index 7c67d1f042..fd09764212 100644
--- a/src/southbridge/amd/cs5536/cs5536_early_setup.c
+++ b/src/southbridge/amd/cs5536/cs5536_early_setup.c
@@ -153,47 +153,98 @@ static void cs5536_setup_cis_mode(void)
wrmsr(GLPCI_SB_CTRL, msr);
}
-/* see page 412 of the cs5536 companion book */
-static void cs5536_setup_onchipuart(void)
+/**
+ * Enable the on-chip UART.
+ *
+ * See page 412 of the AMD Geode CS5536 Companion Device data book.
+ */
+void cs5536_setup_onchipuart1(void)
{
msr_t msr;
/* Setup early for polling only mode.
- * 1. Eanble GPIO 8 to OUT_AUX1, 9 to IN_AUX1
+ * 1. Enable GPIO 8 to OUT_AUX1, 9 to IN_AUX1.
* GPIO LBAR + 0x04, LBAR + 0x10, LBAR + 0x20, LBAR + 34
- * 2. Enable UART IO space in MDD
+ * 2. Enable UART I/O space in MDD.
* MSR 0x51400014 bit 18:16
- * 3. Enable UART controller
+ * 3. Enable UART controller.
* MSR 0x5140003A bit 0, 1
*/
/* GPIO8 - UART1_TX */
- /* Set: Output Enable (0x4) */
+ /* Set: Output Enable (0x4) */
outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE);
/* Set: OUTAUX1 Select (0x10) */
outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT);
/* GPIO9 - UART1_RX */
- /* Set: Input Enable (0x20) */
+ /* Set: Input Enable (0x20) */
outl(GPIOL_9_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
- /* Set: INAUX1 Select (0x34) */
+ /* Set: INAUX1 Select (0x34) */
outl(GPIOL_9_SET, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT);
- /* set address to 3F8 */
+ /* Set address to 0x3F8. */
msr = rdmsr(MDD_LEG_IO);
msr.lo |= 0x7 << 16;
wrmsr(MDD_LEG_IO, msr);
- /* Bit 1 = DEVEN (device enable)
- * Bit 4 = EN_BANKS (allow access to the upper banks
+ /* Bit 1 = DEVEN (device enable)
+ * Bit 4 = EN_BANKS (allow access to the upper banks)
*/
msr.lo = (1 << 4) | (1 << 1);
msr.hi = 0;
- /* enable COM1 */
+ /* Enable COM1. */
wrmsr(MDD_UART1_CONF, msr);
}
+void cs5536_setup_onchipuart2(void)
+{
+ msr_t msr;
+
+ /* GPIO4 - UART2_TX */
+ /* Set: Output Enable (0x4) */
+ outl(GPIOL_4_SET, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE);
+ /* Set: OUTAUX1 Select (0x10) */
+ outl(GPIOL_4_SET, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT);
+ /* GPIO4 - UART2_RX */
+ /* Set: Input Enable (0x20) */
+ outl(GPIOL_3_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
+ /* Set: INAUX1 Select (0x34) */
+ outl(GPIOL_3_SET, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT);
+
+ /* Set: GPIO 3 + 3 Pull Up (0x18) */
+ outl(GPIOL_3_SET | GPIOL_4_SET,
+ GPIO_IO_BASE + GPIOL_PULLUP_ENABLE);
+
+ /* set address to 2F8 */
+ msr = rdmsr(MDD_LEG_IO);
+ msr.lo |= 0x5 << 20;
+ wrmsr(MDD_LEG_IO, msr);
+
+ /* Bit 1 = DEVEN (device enable)
+ * Bit 4 = EN_BANKS (allow access to the upper banks
+ */
+ msr.lo = (1 << 4) | (1 << 1);
+ msr.hi = 0;
+
+ /* enable COM2 */
+ wrmsr(MDD_UART2_CONF, msr);
+}
+
+void cs5536_setup_onchipuart(int uart)
+{
+ switch (uart) {
+ case 1:
+ cs5536_setup_onchipuart1();
+ break;
+ case 2:
+ cs5536_setup_onchipuart2();
+ break;
+ }
+}
+
+
/* note: you can't do prints in here in most cases,
* and we don't want to hang on serial, so they are
* commented out