summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMyles Watson <mylesgw@gmail.com>2010-04-30 20:36:02 +0000
committerMyles Watson <mylesgw@gmail.com>2010-04-30 20:36:02 +0000
commit2c32e9902c4f4a76e404a9a3e673857d5fe7835b (patch)
treeaf66d4eaabfea7d4cdd8654885e4264d7ff2a564
parent95bf86be342ea43a99fc7430480d527484d938f9 (diff)
Factor out casmap calculation. Gets rid of a warning.
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5519 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/northbridge/amd/lx/raminit.c112
1 files changed, 45 insertions, 67 deletions
diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c
index 9014fb1de3..d2197a7583 100644
--- a/src/northbridge/amd/lx/raminit.c
+++ b/src/northbridge/amd/lx/raminit.c
@@ -238,46 +238,23 @@ static void set_refresh_rate(void)
const uint8_t CASDDR[] = { 5, 5, 2, 6, 3, 7, 4, 0 }; /* 1(1.5), 1.5, 2, 2.5, 3, 3.5, 4, 0 */
-static void setCAS(void)
+static u8 getcasmap(u32 dimm, u16 glspeed)
{
-/*;*****************************************************************************
-;*
-;* setCAS
-;* EEPROM byte usage: (18) SDRAM device attributes - CAS latency
-;* EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5
-;* EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1
-;*
-;* The CAS setting is based on the information provided in each DIMMs SPD.
-;* The speed at which a DIMM can run is described relative to the slowest
-;* CAS the DIMM supports. Each speed for the relative CAS settings is
-;* checked that it is within the GeodeLink speed. If it isn't within the GeodeLink
-;* speed, the CAS setting is removed from the list of good settings for
-;* the DIMM. This is done for both DIMMs and the lists are compared to
-;* find the lowest common CAS latency setting. If there are no CAS settings
-;* in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt.
-;*
-;* Entry:
-;* Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information.
-;* Destroys: We really use everything !
-;*****************************************************************************/
- uint16_t glspeed, dimm_speed;
- uint8_t spd_byte, casmap0, casmap1, casmap_shift;
- msr_t msr;
-
- glspeed = GeodeLinkSpeed();
+ u16 dimm_speed;
+ u8 spd_byte, casmap, casmap_shift=0;
/************************** DIMM0 **********************************/
- casmap0 = spd_read_byte(DIMM0, SPD_ACCEPTABLE_CAS_LATENCIES);
- if (casmap0 != 0xFF) {
+ casmap = spd_read_byte(dimm, SPD_ACCEPTABLE_CAS_LATENCIES);
+ if (casmap != 0xFF) {
/* IF -.5 timing is supported, check -.5 timing > GeodeLink */
- spd_byte = spd_read_byte(DIMM0, SPD_SDRAM_CYCLE_TIME_2ND);
+ spd_byte = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_2ND);
if (spd_byte != 0) {
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
dimm_speed = 20000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F));
if (dimm_speed >= glspeed) {
casmap_shift = 1; /* -.5 is a shift of 1 */
/* IF -1 timing is supported, check -1 timing > GeodeLink */
- spd_byte = spd_read_byte(DIMM0, SPD_SDRAM_CYCLE_TIME_3RD);
+ spd_byte = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_3RD);
if (spd_byte != 0) {
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
dimm_speed = 20000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F));
@@ -290,52 +267,53 @@ static void setCAS(void)
}
} /* SPD_SDRAM_CYCLE_TIME_2ND (-.5) !=0 */
/* set the casmap based on the shift to limit possible CAS settings */
- spd_byte = 31 - __builtin_clz((uint32_t) casmap0);
+ spd_byte = 31 - __builtin_clz((uint32_t) casmap);
/* just want bits in the lower byte since we have to cast to a 32 */
- casmap0 &= 0xFF << (spd_byte - casmap_shift);
+ casmap &= 0xFF << (spd_byte - casmap_shift);
} else { /* No DIMM */
- casmap0 = 0;
+ casmap = 0;
}
+ return casmap;
+}
- /************************** DIMM1 **********************************/
- casmap1 = spd_read_byte(DIMM1, SPD_ACCEPTABLE_CAS_LATENCIES);
- if (casmap1 != 0xFF) {
- /* IF -.5 timing is supported, check -.5 timing > GeodeLink */
- spd_byte = spd_read_byte(DIMM1, SPD_SDRAM_CYCLE_TIME_2ND);
- if (spd_byte != 0) {
- /* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- dimm_speed = 20000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F));
- if (dimm_speed >= glspeed) {
- casmap_shift = 1; /* -.5 is a shift of 1 */
- /* IF -1 timing is supported, check -1 timing > GeodeLink */
- spd_byte = spd_read_byte(DIMM1, SPD_SDRAM_CYCLE_TIME_3RD);
- if (spd_byte != 0) {
- /* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- dimm_speed = 20000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F));
- if (dimm_speed >= glspeed) {
- casmap_shift = 2; /* -1 is a shift of 2 */
- }
- /* note that the -1 result doesn't need to change the available CAS map */
- } /* SPD_SDRAM_CYCLE_TIME_3RD (-1) !=0 */
- } else {
- casmap_shift = 0;
- }
- } /* SPD_SDRAM_CYCLE_TIME_2ND (-.5) !=0 */
- /* set the casmap based on the shift to limit possible CAS settings */
- spd_byte = 31 - __builtin_clz((uint32_t) casmap1);
- /* just want bits in the lower byte since we have to cast to a 32 */
- casmap1 &= 0xFF << (spd_byte - casmap_shift);
- } else { /* No DIMM */
- casmap1 = 0;
- }
+static void setCAS(void)
+{
+/*;*****************************************************************************
+;*
+;* setCAS
+;* EEPROM byte usage: (18) SDRAM device attributes - CAS latency
+;* EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5
+;* EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1
+;*
+;* The CAS setting is based on the information provided in each DIMMs SPD.
+;* The speed at which a DIMM can run is described relative to the slowest
+;* CAS the DIMM supports. Each speed for the relative CAS settings is
+;* checked that it is within the GeodeLink speed. If it isn't within the GeodeLink
+;* speed, the CAS setting is removed from the list of good settings for
+;* the DIMM. This is done for both DIMMs and the lists are compared to
+;* find the lowest common CAS latency setting. If there are no CAS settings
+;* in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt.
+;*
+;* Entry:
+;* Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information.
+;* Destroys: We really use everything !
+;*****************************************************************************/
+ uint16_t glspeed;
+ uint8_t spd_byte, casmap0, casmap1;
+ msr_t msr;
+
+ glspeed = GeodeLinkSpeed();
+
+ casmap0 = getcasmap(DIMM0, glspeed);
+ casmap1 = getcasmap(DIMM1, glspeed);
/********************* CAS_LAT MAP COMPARE ***************************/
if (casmap0 == 0) {
- spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap1)];
+ spd_byte = CASDDR[__builtin_ctz(casmap1)];
} else if (casmap1 == 0) {
- spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap0)];
+ spd_byte = CASDDR[__builtin_ctz(casmap0)];
} else if ((casmap0 &= casmap1)) {
- spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap0)];
+ spd_byte = CASDDR[__builtin_ctz(casmap0)];
} else {
print_emerg("DIMM CAS Latencies not compatible\n");
post_code(ERROR_DIFF_DIMMS);