summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2007-05-21 21:36:03 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2007-05-21 21:36:03 +0000
commit0af4856017431f0e9ef99e6a99e2a2da9f50f593 (patch)
treecc3f446afffa174b194555686de1c7a778d35bf0
parent1e79f12654d99bf786d5d2249bfbf61cd92523ff (diff)
Drop the (non-working, almost non-existant) support for
- the Transmeta TM5800 northbridge - the Densitron DPX114 mainboard (the only one using the TM5800) Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2685 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/densitron/dpx114/Config.lb147
-rw-r--r--src/mainboard/densitron/dpx114/Options.lb109
-rw-r--r--src/mainboard/densitron/dpx114/auto.c124
-rw-r--r--src/mainboard/densitron/dpx114/chip.h5
-rw-r--r--src/mainboard/densitron/dpx114/cmos.layout74
-rw-r--r--src/mainboard/densitron/dpx114/debug.c128
-rw-r--r--src/mainboard/densitron/dpx114/failover.c32
-rw-r--r--src/mainboard/densitron/dpx114/irq_tables.c34
-rw-r--r--src/mainboard/densitron/dpx114/mainboard.c7
-rw-r--r--src/mainboard/densitron/dpx114/reset.c43
-rw-r--r--src/northbridge/transmeta/tm5800/Config.lb4
-rw-r--r--src/northbridge/transmeta/tm5800/chip.h5
-rw-r--r--src/northbridge/transmeta/tm5800/cpu_rev.c15
-rw-r--r--src/northbridge/transmeta/tm5800/debug.c70
-rw-r--r--src/northbridge/transmeta/tm5800/northbridge.c155
-rw-r--r--src/northbridge/transmeta/tm5800/northbridge.h5
16 files changed, 0 insertions, 957 deletions
diff --git a/src/mainboard/densitron/dpx114/Config.lb b/src/mainboard/densitron/dpx114/Config.lb
deleted file mode 100644
index 83d7ef5138..0000000000
--- a/src/mainboard/densitron/dpx114/Config.lb
+++ /dev/null
@@ -1,147 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/via/vt8601
- device pci_domain 0 on
- chip southbridge/via/vt8231
- register "enable_usb" = "0"
- register "enable_native_ide" = "0"
- register "enable_com_ports" = "1"
- register "enable_keyboard" = "0"
- register "enable_nvram" = "1"
-# device pci 0:11.0 on end
-# device pci 0:11.1 on end
-# device pci 0:11.2 on end
-# device pci 0:11.3 on end
-# device pci 0:11.4 on end
-# device pci 0:11.5 on end
-# device pci 0:11.6 on end
-# device pci 0:12.0 on end
- end
- end
- chip cpu/via/model_centaur
- end
-end
diff --git a/src/mainboard/densitron/dpx114/Options.lb b/src/mainboard/densitron/dpx114/Options.lb
deleted file mode 100644
index 86243a614d..0000000000
--- a/src/mainboard/densitron/dpx114/Options.lb
+++ /dev/null
@@ -1,109 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses HAVE_OPTION_TABLE
-uses USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD_START
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_MP_TABLE
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-uses CONFIG_UDELAY_IO
-
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default HAVE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## use io based udelay function
-##
-default CONFIG_UDELAY_IO=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=5
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-default FALLBACK_SIZE = 131072
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-default USE_OPTION_TABLE = 0
-
-default _RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-end
diff --git a/src/mainboard/densitron/dpx114/auto.c b/src/mainboard/densitron/dpx114/auto.c
deleted file mode 100644
index 992dfbcf22..0000000000
--- a/src/mainboard/densitron/dpx114/auto.c
+++ /dev/null
@@ -1,124 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#if 0
-#include <cpu/x86/lapic.h>
-#endif
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <arch/hlt.h>
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/via/vt8601/raminit.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-/*
- */
-void udelay(int usecs)
-{
- int i;
- for(i = 0; i < usecs; i++)
- outb(i&0xff, 0x80);
-}
-
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "debug.c"
-
-#include "southbridge/via/vt8231/vt8231_early_smbus.c"
-
-
-#include "southbridge/via/vt8231/vt8231_early_serial.c"
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/via/vt8601/raminit.c"
-
-
-static void enable_mainboard_devices(void)
-{
- device_t dev;
- /* dev 0 for southbridge */
-
- dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
-
- if (dev == PCI_DEV_INVALID) {
- die("Southbridge not found!!!\n");
- }
- pci_write_config8(dev, 0x50, 7);
- pci_write_config8(dev, 0x51, 0xff);
-#if 0
- // This early setup switches IDE into compatibility mode before PCI gets
- // // a chance to assign I/Os
- // movl $CONFIG_ADDR(0, 0x89, 0x42), %eax
- // // movb $0x09, %dl
- // movb $0x00, %dl
- // PCI_WRITE_CONFIG_BYTE
- //
-#endif
- /* we do this here as in V2, we can not yet do raw operations
- * to pci!
- */
- dev += 0x100; /* ICKY */
-
- pci_write_config8(dev, 0x42, 0);
-}
-
-static void enable_shadow_ram(void)
-{
- device_t dev = 0; /* no need to look up 0:0.0 */
- unsigned char shadowreg;
- /* dev 0 for southbridge */
- shadowreg = pci_read_config8(dev, 0x63);
- /* 0xf0000-0xfffff */
- shadowreg |= 0x30;
- pci_write_config8(dev, 0x63, shadowreg);
-}
-
-static void main(unsigned long bist)
-{
- unsigned long x;
-
- if (bist == 0) {
- early_mtrr_init();
- }
- enable_vt8231_serial();
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- /* init_timer();*/
- outb(5, 0x80);
-
- enable_mainboard_devices();
- enable_smbus();
- enable_shadow_ram();
- /* Check all of memory */
-#if 0
- ram_check(0x00000000, msr.lo);
-#endif
-#if 0
- static const struct {
- unsigned long lo, hi;
- } check_addrs[] = {
- /* Check 16MB of memory @ 0*/
- { 0x00000000, 0x01000000 },
-#if TOTAL_CPUS > 1
- /* Check 16MB of memory @ 2GB */
- { 0x80000000, 0x81000000 },
-#endif
- };
- int i;
- for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
- ram_check(check_addrs[i].lo, check_addrs[i].hi);
- }
-#endif
-}
diff --git a/src/mainboard/densitron/dpx114/chip.h b/src/mainboard/densitron/dpx114/chip.h
deleted file mode 100644
index 10beb176b0..0000000000
--- a/src/mainboard/densitron/dpx114/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_densitron_dpx114_ops;
-
-struct mainboard_densitron_dpx114_config {
- int nothing;
-};
diff --git a/src/mainboard/densitron/dpx114/cmos.layout b/src/mainboard/densitron/dpx114/cmos.layout
deleted file mode 100644
index 5ba4c032c1..0000000000
--- a/src/mainboard/densitron/dpx114/cmos.layout
+++ /dev/null
@@ -1,74 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
-
-
diff --git a/src/mainboard/densitron/dpx114/debug.c b/src/mainboard/densitron/dpx114/debug.c
deleted file mode 100644
index 714fcc5783..0000000000
--- a/src/mainboard/densitron/dpx114/debug.c
+++ /dev/null
@@ -1,128 +0,0 @@
-
-static void print_debug_pci_dev(unsigned dev)
-{
- print_debug("PCI: ");
- print_debug_hex8((dev >> 16) & 0xff);
- print_debug_char(':');
- print_debug_hex8((dev >> 11) & 0x1f);
- print_debug_char('.');
- print_debug_hex8((dev >> 8) & 7);
-}
-
-static void print_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- print_debug_pci_dev(dev);
- print_debug("\r\n");
- }
-}
-
-static void dump_pci_device(unsigned dev)
-{
- int i;
- print_debug_pci_dev(dev);
- print_debug("\r\n");
-
- for(i = 0; i <= 255; i++) {
- unsigned char val;
- if ((i & 0x0f) == 0) {
- print_debug_hex8(i);
- print_debug_char(':');
- }
- val = pci_read_config8(dev, i);
- print_debug_char(' ');
- print_debug_hex8(val);
- if ((i & 0x0f) == 0x0f) {
- print_debug("\r\n");
- }
- }
-}
-
-static void dump_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- dump_pci_device(dev);
- }
-}
-#if 0
-static void dump_spd_registers(const struct mem_controller *ctrl)
-{
- int i;
- print_debug("\r\n");
- for(i = 0; i < 4; i++) {
- unsigned device;
- device = ctrl->channel0[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".0: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
- device = ctrl->channel1[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".1: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
- }
-}
-#endif
diff --git a/src/mainboard/densitron/dpx114/failover.c b/src/mainboard/densitron/dpx114/failover.c
deleted file mode 100644
index bdcb9eaed2..0000000000
--- a/src/mainboard/densitron/dpx114/failover.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include "arch/romcc_io.h"
-#include "pc80/mc146818rtc_early.c"
-
-static unsigned long main(unsigned long bist)
-{
- /* This is the primary cpu how should I boot? */
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/densitron/dpx114/irq_tables.c b/src/mainboard/densitron/dpx114/irq_tables.c
deleted file mode 100644
index 6c1acd0a51..0000000000
--- a/src/mainboard/densitron/dpx114/irq_tables.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*5, /* there can be total 5 devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0x1ea0, /* IRQs devoted exclusively to PCI usage */
- 0, /* Vendor */
- 0, /* Device */
- 0, /* Crap (miniport) */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x15, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x09<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x1, 0x0},
- {0x00,(0x0a<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x2, 0x0},
- {0x00,(0x0b<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x3, 0x0},
- {0x00,(0x0f<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},
- {0x00,(0x02<<3)|0x0, {{0x59, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/densitron/dpx114/mainboard.c b/src/mainboard/densitron/dpx114/mainboard.c
deleted file mode 100644
index 189e9b2788..0000000000
--- a/src/mainboard/densitron/dpx114/mainboard.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <device/device.h>
-#include "chip.h"
-
-struct chip_operations mainboard_densitron_dpx114_ops = {
- CHIP_NAME("Densitron DPX114 Mainboard")
-};
-
diff --git a/src/mainboard/densitron/dpx114/reset.c b/src/mainboard/densitron/dpx114/reset.c
deleted file mode 100644
index 5796e17dc8..0000000000
--- a/src/mainboard/densitron/dpx114/reset.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#if 0
-//#include "arch/romcc_io.h"
-#include <arch/io.h>
-
-typedef unsigned device_t;
-
-#define PCI_DEV(BUS, DEV, FN) ( \
- (((BUS) & 0xFF) << 16) | \
- (((DEV) & 0x1f) << 11) | \
- (((FN) & 0x7) << 8))
-
-static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
-{
- unsigned addr;
- addr = dev | where;
- outl(0x80000000 | (addr & ~3), 0xCF8);
- outb(value, 0xCFC + (addr & 3));
-}
-
-static void pci_write_config32(device_t dev, unsigned where, unsigned value)
-{
- unsigned addr;
- addr = dev | where;
- outl(0x80000000 | (addr & ~3), 0xCF8);
- outl(value, 0xCFC);
-}
-
-static unsigned pci_read_config32(device_t dev, unsigned where)
-{
- unsigned addr;
- addr = dev | where;
- outl(0x80000000 | (addr & ~3), 0xCF8);
- return inl(0xCFC);
-}
-
-#include "../../../northbridge/amd/amdk8/reset_test.c"
-
-void hard_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
-}
-#endif
diff --git a/src/northbridge/transmeta/tm5800/Config.lb b/src/northbridge/transmeta/tm5800/Config.lb
deleted file mode 100644
index fab87f8eeb..0000000000
--- a/src/northbridge/transmeta/tm5800/Config.lb
+++ /dev/null
@@ -1,4 +0,0 @@
-
-config chip.h
-object northbridge.o
-
diff --git a/src/northbridge/transmeta/tm5800/chip.h b/src/northbridge/transmeta/tm5800/chip.h
deleted file mode 100644
index 3390bcdcbe..0000000000
--- a/src/northbridge/transmeta/tm5800/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-struct northbridge_transmeta_tm5800_config
-{
-};
-
-extern struct chip_operations northbridge_transmeta_tm5800_control;
diff --git a/src/northbridge/transmeta/tm5800/cpu_rev.c b/src/northbridge/transmeta/tm5800/cpu_rev.c
deleted file mode 100644
index b84b0b159c..0000000000
--- a/src/northbridge/transmeta/tm5800/cpu_rev.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* this is a shrunken cpuid. */
-
-static unsigned int cpuid(unsigned int op)
-{
- unsigned int ret;
- unsigned dummy2,dummy3,dummy4;
-
- asm volatile (
- "cpuid"
- : "=a" (ret), "=b" (dummy2), "=c" (dummy3), "=d" (dummy4)
- : "a" (op)
- );
-
- return ret;
-}
diff --git a/src/northbridge/transmeta/tm5800/debug.c b/src/northbridge/transmeta/tm5800/debug.c
deleted file mode 100644
index 2c052741f6..0000000000
--- a/src/northbridge/transmeta/tm5800/debug.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * generic K8 debug code, used by mainboard specific auto.c
- *
- */
-
-static void print_debug_pci_dev(unsigned dev)
-{
- print_debug("PCI: ");
- print_debug_hex8((dev >> 16) & 0xff);
- print_debug_char(':');
- print_debug_hex8((dev >> 11) & 0x1f);
- print_debug_char('.');
- print_debug_hex8((dev >> 8) & 7);
-}
-
-static void print_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- print_debug_pci_dev(dev);
- print_debug("\r\n");
- }
-}
-
-static void dump_pci_device(unsigned dev)
-{
- int i;
- print_debug_pci_dev(dev);
- print_debug("\r\n");
-
- for(i = 0; i <= 255; i++) {
- unsigned char val;
- if ((i & 0x0f) == 0) {
- print_debug_hex8(i);
- print_debug_char(':');
- }
- val = pci_read_config8(dev, i);
- print_debug_char(' ');
- print_debug_hex8(val);
- if ((i & 0x0f) == 0x0f) {
- print_debug("\r\n");
- }
- }
-}
-
-static void dump_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- dump_pci_device(dev);
- }
-}
diff --git a/src/northbridge/transmeta/tm5800/northbridge.c b/src/northbridge/transmeta/tm5800/northbridge.c
deleted file mode 100644
index ddc4aa5106..0000000000
--- a/src/northbridge/transmeta/tm5800/northbridge.c
+++ /dev/null
@@ -1,155 +0,0 @@
-#include <console/console.h>
-#include <arch/io.h>
-#include <stdint.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/hypertransport.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bitops.h>
-#include "chip.h"
-#include "northbridge.h"
-
-#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
-
-static void pci_domain_read_resources(device_t dev)
-{
- struct resource *resource;
- unsigned reg;
-
- /* Initialize the system wide io space constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-
- /* Initialize the system wide memory resources constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
- resource->limit = 0xffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-}
-
-static void ram_resource(device_t dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
-{
- struct resource *resource;
-
- if (!sizek) {
- return;
- }
- resource = new_resource(dev, index);
- resource->base = ((resource_t)basek) << 10;
- resource->size = ((resource_t)sizek) << 10;
- resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-}
-
-static void tolm_test(void *gp, struct device *dev, struct resource *new)
-{
- struct resource **best_p = gp;
- struct resource *best;
- best = *best_p;
- if (!best || (best->base > new->base)) {
- best = new;
- }
- *best_p = best;
-}
-
-static uint32_t find_pci_tolm(struct bus *bus)
-{
- struct resource *min;
- uint32_t tolm;
- min = 0;
- search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
- tolm = 0xffffffffUL;
- if (min && tolm > min->base) {
- tolm = min->base;
- }
- return tolm;
-}
-
-static void pci_domain_set_resources(device_t dev)
-{
- struct resource *resource, *last;
- device_t mc_dev;
- uint32_t pci_tolm;
-
- pci_tolm = find_pci_tolm(&dev->link[0]);
- mc_dev = dev->link[0].children;
- if (mc_dev) {
- /* Figure out which areas are/should be occupied by RAM.
- * This is all computed in kilobytes and converted to/from
- * the memory controller right at the edges.
- * Having different variables in different units is
- * too confusing to get right. Kilobytes are good up to
- * 4 Terabytes of RAM...
- */
- unsigned long tomk, tolmk;
- int idx;
-
-#warning "This is hardcoded to 1MiB of RAM for now"
- tomk = 1024;
- /* Compute the top of Low memory */
- tolmk = pci_tolm >> 10;
- if (tolmk >= tomk) {
- /* The PCI hole does does not overlap the memory.
- */
- tolmk = tomk;
- }
- /* Report the memory regions */
- idx = 10;
- ram_resource(dev, idx++, 0, 640);
- ram_resource(dev, idx++, 768, tolmk - 768);
- }
- assign_resources(&dev->link[0]);
-}
-
-static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
-{
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
- return max;
-}
-
-static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = enable_childrens_resources,
- .init = 0,
- .scan_bus = pci_domain_scan_bus,
-};
-
-static void cpu_bus_init(device_t dev)
-{
- initialize_cpus(&dev->link[0]);
-}
-
-static void cpu_bus_noop(device_t dev)
-{
-}
-
-static struct device_operations cpu_bus_ops = {
- .read_resources = cpu_bus_noop,
- .set_resources = cpu_bus_noop,
- .enable_resources = cpu_bus_noop,
- .init = cpu_bus_init,
- .scan_bus = 0,
-};
-
-static void enable_dev(struct device *dev)
-{
- struct device_path path;
-
- /* Set the operations if it is a special bus type */
- if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
- dev->ops = &pci_domain_ops;
- pci_set_method(dev);
- }
- else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
- dev->ops = &cpu_bus_ops;
- }
-}
-
-struct chip_operations northbridge_transmeta_tm5800_control = {
- CHIP_NAME("Transmeta TM5800 Northbridge")
- .enable_dev = enable_dev,
-};
diff --git a/src/northbridge/transmeta/tm5800/northbridge.h b/src/northbridge/transmeta/tm5800/northbridge.h
deleted file mode 100644
index 07ac989736..0000000000
--- a/src/northbridge/transmeta/tm5800/northbridge.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef NORTHBRIDGE_TRANSMETA_TM58000_H
-#define NORTHBRIDGE_TRANSMETA_TM58000_H
-
-
-#endif /* NORTHBRIDGE_TRANSMETA_TM58000_H */