mainboard/technexion/tim5690: Use tabs for indents

Change-Id: Icd1f145b3575c6d95dacceb9c0426fbdedcdd686
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

5 files changed, 253 insertions, 253 deletions

diff --git a/src/mainboard/technexion/tim5690/acpi/usb.asl b/src/mainboard/technexion/tim5690/acpi/usb.asl
index 5381e76042..dbffa39ad2 100644
--- a/src/mainboard/technexion/tim5690/acpi/usb.asl
+++ b/src/mainboard/technexion/tim5690/acpi/usb.asl
@@ -23,7 +23,7 @@ DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
 */
 Method(UCOC, 0) {
 	Sleep(20)
-    	Store(0x13,CMTI)
+	Store(0x13,CMTI)
 	Store(0,GPSL)
 }
 
@@ -122,7 +122,7 @@ If (LLessEqual(UOM6,9)) {
 
 /* USB Port 7 overcurrent uses Gpm 7 */
 If (LLessEqual(UOM7,9)) {
- 	Scope (\_GPE) {
+	Scope (\_GPE) {
 		/* Method (_L1D) { */
 		Method (_L07) {
 			UCOC()
diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c
index f84b7a0083..8bc1075a8b 100644
--- a/src/mainboard/technexion/tim5690/mainboard.c
+++ b/src/mainboard/technexion/tim5690/mainboard.c
@@ -82,29 +82,29 @@ int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);
    LDN the register belongs to, before you can access the register. */
 static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value)
 {
-        outb(IT8712F_CONFIG_REG_LDN, SIO_BASE);
-        outb(ldn, SIO_DATA);
-        outb(index, SIO_BASE);
-        outb(value, SIO_DATA);
+	outb(IT8712F_CONFIG_REG_LDN, SIO_BASE);
+	outb(ldn, SIO_DATA);
+	outb(index, SIO_BASE);
+	outb(value, SIO_DATA);
 }
 
 static void it8712f_enter_conf(void)
 {
-        /*  Enter the configuration state (MB PnP mode). */
-
-        /* Perform MB PnP setup to put the SIO chip at 0x2e. */
-        /* Base address 0x2e: 0x87 0x01 0x55 0x55. */
-        /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */
-        outb(0x87, IT8712F_CONFIGURATION_PORT);
-        outb(0x01, IT8712F_CONFIGURATION_PORT);
-        outb(0x55, IT8712F_CONFIGURATION_PORT);
-        outb(0x55, IT8712F_CONFIGURATION_PORT);
+	/*  Enter the configuration state (MB PnP mode). */
+
+	/* Perform MB PnP setup to put the SIO chip at 0x2e. */
+	/* Base address 0x2e: 0x87 0x01 0x55 0x55. */
+	/* Base address 0x4e: 0x87 0x01 0x55 0xaa. */
+	outb(0x87, IT8712F_CONFIGURATION_PORT);
+	outb(0x01, IT8712F_CONFIGURATION_PORT);
+	outb(0x55, IT8712F_CONFIGURATION_PORT);
+	outb(0x55, IT8712F_CONFIGURATION_PORT);
 }
 
 static void it8712f_exit_conf(void)
 {
-        /* Exit the configuration state (MB PnP mode). */
-        it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
+	/* Exit the configuration state (MB PnP mode). */
+	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
 }
 
 /* set thermal config
@@ -173,15 +173,15 @@ static void set_thermal_config(void)
 /* Mainboard specific GPIO setup. */
 static void mb_gpio_init(u16 *iobase)
 {
-        /* Init Super I/O GPIOs. */
-        it8712f_enter_conf();
-        outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX);
-        outb(IT8712F_GPIO, SIO_DATA);
-        outb(0x62, SIO_INDEX);
-        outb((*iobase >> 8), SIO_DATA);
-        outb(0x63, SIO_INDEX);
-        outb((*iobase & 0xff), SIO_DATA);
-        it8712f_exit_conf();
+	/* Init Super I/O GPIOs. */
+	it8712f_enter_conf();
+	outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX);
+	outb(IT8712F_GPIO, SIO_DATA);
+	outb(0x62, SIO_INDEX);
+	outb((*iobase >> 8), SIO_DATA);
+	outb(0x63, SIO_INDEX);
+	outb((*iobase & 0xff), SIO_DATA);
+	it8712f_exit_conf();
 }
 
 #if CONFIG_VGA_ROM_RUN
diff --git a/src/mainboard/technexion/tim5690/speaker.c b/src/mainboard/technexion/tim5690/speaker.c
index 50f510d1f6..7c0ea6492b 100644
--- a/src/mainboard/technexion/tim5690/speaker.c
+++ b/src/mainboard/technexion/tim5690/speaker.c
@@ -33,55 +33,55 @@
 #include "speaker.h"
 
 void speaker_init(uint8_t time) {
-   /* SB600 RRG.
-    * Options_0 - RW - 8 bits - [PM_Reg: 60h].
-    * SpkrEn, bit[5]=1b, Setting this bit will configure GPIO2 to be speaker output.
-    */
+	/* SB600 RRG.
+	 * Options_0 - RW - 8 bits - [PM_Reg: 60h].
+	 * SpkrEn, bit[5]=1b, Setting this bit will configure GPIO2 to be speaker output.
+	 */
 #ifdef __PRE_RAM__
-   pmio_write(0x60, (pmio_read(0x60) | (1<<5)));
+	pmio_write(0x60, (pmio_read(0x60) | (1<<5)));
 #else
-   pm_iowrite(0x60, (pm_ioread(0x60) | (1<<5)));
+	pm_iowrite(0x60, (pm_ioread(0x60) | (1<<5)));
 #endif /* __PRE_RAM__ */
 
-   /* SB600 RRG.
-    * Tmr1CntrlWord - RW - 8 bits - [IO_Reg: 43h].
-    * ModeSelect, bit[3:1]=011b, Square wave output.
-    * CmmandSelect, bit[5:4]=11b, Read/write least, and then most significant byte.
-    * CounterSelect, bit[7:6]=10b, Select counter 2.
-    */
-   outb(0xb6, 0x43);
+	/* SB600 RRG.
+	 * Tmr1CntrlWord - RW - 8 bits - [IO_Reg: 43h].
+	 * ModeSelect, bit[3:1]=011b, Square wave output.
+	 * CmmandSelect, bit[5:4]=11b, Read/write least, and then most significant byte.
+	 * CounterSelect, bit[7:6]=10b, Select counter 2.
+	 */
+	outb(0xb6, 0x43);
 
 
-   /* SB600 RRG.
-    * TimerCh2- RW - 8 bits - [IO_Reg: 42h].
-    */
-   outb(time, 0x42);
+	/* SB600 RRG.
+	 * TimerCh2- RW - 8 bits - [IO_Reg: 42h].
+	 */
+	outb(time, 0x42);
 }
 
 void speaker_on_nodelay(void) {
-   /* SB600 RRG.
-    * Nmi_Status - RW - 8 bits - [IO_Reg: 61h].
-    * SpkrEnable, bit[0]=1b, Enable counter 2
-    * SpkrTmrEnable, bit[1]=1b, Speaker timer on
-    */
-   outb(inb(0x61) | 0x03, 0x61);
+	/* SB600 RRG.
+	 * Nmi_Status - RW - 8 bits - [IO_Reg: 61h].
+	 * SpkrEnable, bit[0]=1b, Enable counter 2
+	 * SpkrTmrEnable, bit[1]=1b, Speaker timer on
+	 */
+	outb(inb(0x61) | 0x03, 0x61);
 }
 
 void speaker_on_delay(void) {
-   speaker_on_nodelay();
-   mdelay(100);
+	speaker_on_nodelay();
+	mdelay(100);
 }
 
 void speaker_off_nodelay(void) {
-   /* SB600 RRG.
-    * Nmi_Status - RW - 8 bits - [IO_Reg: 61h].
-    * SpkrEnable, bit[0]=0b, Disable counter 2
-    * SpkrTmrEnable, bit[1]=0b, Speaker timer off
-    */
-   outb(inb(0x61) & ~0x03, 0x61);
+	/* SB600 RRG.
+	 * Nmi_Status - RW - 8 bits - [IO_Reg: 61h].
+	 * SpkrEnable, bit[0]=0b, Disable counter 2
+	 * SpkrTmrEnable, bit[1]=0b, Speaker timer off
+	 */
+	outb(inb(0x61) & ~0x03, 0x61);
 }
 
 void speaker_off_delay(void) {
-   speaker_off_nodelay();
-   mdelay(100);
+	speaker_off_nodelay();
+	mdelay(100);
 }
diff --git a/src/mainboard/technexion/tim5690/tn_post_code.c b/src/mainboard/technexion/tim5690/tn_post_code.c
index 213034a316..fba0d75fdc 100644
--- a/src/mainboard/technexion/tim5690/tn_post_code.c
+++ b/src/mainboard/technexion/tim5690/tn_post_code.c
@@ -35,90 +35,90 @@
 // TechNexion's Post Code Initially.
 void technexion_post_code_init(void)
 {
-   uint8_t reg8_data;
-   device_t dev = 0;
-
-   // SMBus Module and ACPI Block (Device 20, Function 0)
-   dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0);
-
-   // LED[bit0]:GPIO0
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pmio_read(0x60);
-   reg8_data |= (1 << 7);  // 1: GPIO if not used by SATA
-   pmio_write(0x60, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0x80);
-   reg8_data = ((reg8_data | (1 << 0)) & ~(1 << 4));
-   pci_write_config8(dev, 0x80, reg8_data);
-
-   // LED[bit1]:GPIO1
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pci_read_config8(dev, 0x80);
-   reg8_data = ((reg8_data | (1 << 1)) & ~(1 << 5));
-   pci_write_config8(dev, 0x80, reg8_data);
-
-   // LED[bit2]:GPIO4
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pmio_read(0x5e);
-   reg8_data &= ~(1 << 7); // 0: GPIO if not used by SATA
-   pmio_write(0x5e, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0xa8);
-   reg8_data |= (1 << 0);
-   pci_write_config8(dev, 0xa8, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0xa9);
-   reg8_data &= ~(1 << 0);
-   pci_write_config8(dev, 0xa9, reg8_data);
-
-   // LED[bit3]:GPIO6
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pmio_read(0x60);
-   reg8_data |= (1 << 7); // 1: GPIO if not used by SATA
-   pmio_write(0x60, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0xa8);
-   reg8_data |= (1 << 2);
-   pci_write_config8(dev, 0xa8, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0xa9);
-   reg8_data &= ~(1 << 2);
-   pci_write_config8(dev, 0xa9, reg8_data);
-   // LED[bit4]:GPIO7
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pci_read_config8(dev, 0xa8);
-   reg8_data |= (1 << 3);
-   pci_write_config8(dev, 0xa8, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0xa9);
-   reg8_data &= ~(1 << 3);
-   pci_write_config8(dev, 0xa9, reg8_data);
-
-   // LED[bit5]:GPIO8
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pci_read_config8(dev, 0xa8);
-   reg8_data |= (1 << 4);
-   pci_write_config8(dev, 0xa8, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0xa9);
-   reg8_data &= ~(1 << 4);
-   pci_write_config8(dev, 0xa9, reg8_data);
-
-   // LED[bit6]:GPIO10
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pci_read_config8(dev, 0xab);
-   reg8_data = ((reg8_data | (1 << 0)) & ~(1 << 1));
-   pci_write_config8(dev, 0xab, reg8_data);
-
-   // LED[bit7]:GPIO66
-   // This is reference SB600 RRG 4.1.1 GPIO
-   reg8_data = pmio_read(0x68);
-   reg8_data &= ~(1 << 5); // 0: GPIO
-   pmio_write(0x68, reg8_data);
-
-   reg8_data = pci_read_config8(dev, 0x7e);
-   reg8_data = ((reg8_data | (1 << 1)) & ~(1 << 5));
-   pci_write_config8(dev, 0x7e, reg8_data);
+	uint8_t reg8_data;
+	device_t dev = 0;
+
+	// SMBus Module and ACPI Block (Device 20, Function 0)
+	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0);
+
+	// LED[bit0]:GPIO0
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pmio_read(0x60);
+	reg8_data |= (1 << 7);  // 1: GPIO if not used by SATA
+	pmio_write(0x60, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0x80);
+	reg8_data = ((reg8_data | (1 << 0)) & ~(1 << 4));
+	pci_write_config8(dev, 0x80, reg8_data);
+
+	// LED[bit1]:GPIO1
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pci_read_config8(dev, 0x80);
+	reg8_data = ((reg8_data | (1 << 1)) & ~(1 << 5));
+	pci_write_config8(dev, 0x80, reg8_data);
+
+	// LED[bit2]:GPIO4
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pmio_read(0x5e);
+	reg8_data &= ~(1 << 7); // 0: GPIO if not used by SATA
+	pmio_write(0x5e, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0xa8);
+	reg8_data |= (1 << 0);
+	pci_write_config8(dev, 0xa8, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0xa9);
+	reg8_data &= ~(1 << 0);
+	pci_write_config8(dev, 0xa9, reg8_data);
+
+	// LED[bit3]:GPIO6
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pmio_read(0x60);
+	reg8_data |= (1 << 7); // 1: GPIO if not used by SATA
+	pmio_write(0x60, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0xa8);
+	reg8_data |= (1 << 2);
+	pci_write_config8(dev, 0xa8, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0xa9);
+	reg8_data &= ~(1 << 2);
+	pci_write_config8(dev, 0xa9, reg8_data);
+	// LED[bit4]:GPIO7
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pci_read_config8(dev, 0xa8);
+	reg8_data |= (1 << 3);
+	pci_write_config8(dev, 0xa8, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0xa9);
+	reg8_data &= ~(1 << 3);
+	pci_write_config8(dev, 0xa9, reg8_data);
+
+	// LED[bit5]:GPIO8
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pci_read_config8(dev, 0xa8);
+	reg8_data |= (1 << 4);
+	pci_write_config8(dev, 0xa8, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0xa9);
+	reg8_data &= ~(1 << 4);
+	pci_write_config8(dev, 0xa9, reg8_data);
+
+	// LED[bit6]:GPIO10
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pci_read_config8(dev, 0xab);
+	reg8_data = ((reg8_data | (1 << 0)) & ~(1 << 1));
+	pci_write_config8(dev, 0xab, reg8_data);
+
+	// LED[bit7]:GPIO66
+	// This is reference SB600 RRG 4.1.1 GPIO
+	reg8_data = pmio_read(0x68);
+	reg8_data &= ~(1 << 5); // 0: GPIO
+	pmio_write(0x68, reg8_data);
+
+	reg8_data = pci_read_config8(dev, 0x7e);
+	reg8_data = ((reg8_data | (1 << 1)) & ~(1 << 5));
+	pci_write_config8(dev, 0x7e, reg8_data);
 
 }
 
@@ -128,96 +128,96 @@ void technexion_post_code_init(void)
  */
 void technexion_post_code(uint8_t udata8)
 {
-   uint8_t u8_data;
-   device_t dev = 0;
+	uint8_t u8_data;
+	device_t dev = 0;
 
-   // SMBus Module and ACPI Block (Device 20, Function 0)
+	// SMBus Module and ACPI Block (Device 20, Function 0)
 #ifdef __PRE_RAM__
-   dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0);
+	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0);
 #else
-   dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0);
+	dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0);
 #endif
 
-   udata8 = ~(udata8);
-
-   // LED[bit0]:GPIO0
-   u8_data = pci_read_config8(dev, 0x80);
-   if (udata8 & 0x1) {
-      u8_data |= (1 << 0);
-   }
-   else {
-      u8_data &= ~(1 << 0);
-   }
-   pci_write_config8(dev, 0x80, u8_data);
-
-   // LED[bit1]:GPIO1
-   u8_data = pci_read_config8(dev, 0x80);
-   if (udata8 & 0x2) {
-      u8_data |= (1 << 1);
-   }
-   else {
-      u8_data &= ~(1 << 1);
-   }
-   pci_write_config8(dev, 0x80, u8_data);
-
-   // LED[bit2]:GPIO4
-   u8_data = pci_read_config8(dev, 0xa8);
-   if (udata8 & 0x4) {
-      u8_data |= (1 << 0);
-   }
-   else {
-      u8_data &= ~(1 << 0);
-   }
-   pci_write_config8(dev, 0xa8, u8_data);
-
-   // LED[bit3]:GPIO6
-   u8_data = pci_read_config8(dev, 0xa8);
-   if (udata8 & 0x8) {
-      u8_data |= (1 << 2);
-   }
-   else {
-      u8_data &= ~(1 << 2);
-   }
-   pci_write_config8(dev, 0xa8, u8_data);
-
-   // LED[bit4]:GPIO7
-   u8_data = pci_read_config8(dev, 0xa8);
-   if (udata8 & 0x10) {
-      u8_data |= (1 << 3);
-   }
-   else {
-      u8_data &= ~(1 << 3);
-   }
-   pci_write_config8(dev, 0xa8, u8_data);
-
-   // LED[bit5]:GPIO8
-   u8_data = pci_read_config8(dev, 0xa8);
-   if (udata8 & 0x20) {
-      u8_data |= (1 << 4);
-   }
-   else {
-      u8_data &= ~(1 << 4);
-   }
-   pci_write_config8(dev, 0xa8, u8_data);
-
-   // LED[bit6]:GPIO10
-   u8_data = pci_read_config8(dev, 0xab);
-   if (udata8 & 0x40) {
-      u8_data |= (1 << 0);
-   }
-   else {
-      u8_data &= ~(1 << 0);
-   }
-   pci_write_config8(dev, 0xab, u8_data);
-
-   // LED[bit7]:GPIO66
-   u8_data = pci_read_config8(dev, 0x7e);
-   if (udata8 & 0x80) {
-      u8_data |= (1 << 1);
-   }
-   else {
-      u8_data &= ~(1 << 1);
-   }
-   pci_write_config8(dev, 0x7e, u8_data);
+	udata8 = ~(udata8);
+
+	// LED[bit0]:GPIO0
+	u8_data = pci_read_config8(dev, 0x80);
+	if (udata8 & 0x1) {
+		u8_data |= (1 << 0);
+	}
+	else {
+		u8_data &= ~(1 << 0);
+	}
+	pci_write_config8(dev, 0x80, u8_data);
+
+	// LED[bit1]:GPIO1
+	u8_data = pci_read_config8(dev, 0x80);
+	if (udata8 & 0x2) {
+		u8_data |= (1 << 1);
+	}
+	else {
+		u8_data &= ~(1 << 1);
+	}
+	pci_write_config8(dev, 0x80, u8_data);
+
+	// LED[bit2]:GPIO4
+	u8_data = pci_read_config8(dev, 0xa8);
+	if (udata8 & 0x4) {
+		u8_data |= (1 << 0);
+	}
+	else {
+		u8_data &= ~(1 << 0);
+	}
+	pci_write_config8(dev, 0xa8, u8_data);
+
+	// LED[bit3]:GPIO6
+	u8_data = pci_read_config8(dev, 0xa8);
+	if (udata8 & 0x8) {
+		u8_data |= (1 << 2);
+	}
+	else {
+		u8_data &= ~(1 << 2);
+	}
+	pci_write_config8(dev, 0xa8, u8_data);
+
+	// LED[bit4]:GPIO7
+	u8_data = pci_read_config8(dev, 0xa8);
+	if (udata8 & 0x10) {
+		u8_data |= (1 << 3);
+	}
+	else {
+		u8_data &= ~(1 << 3);
+	}
+	pci_write_config8(dev, 0xa8, u8_data);
+
+	// LED[bit5]:GPIO8
+	u8_data = pci_read_config8(dev, 0xa8);
+	if (udata8 & 0x20) {
+		u8_data |= (1 << 4);
+	}
+	else {
+		u8_data &= ~(1 << 4);
+	}
+	pci_write_config8(dev, 0xa8, u8_data);
+
+	// LED[bit6]:GPIO10
+	u8_data = pci_read_config8(dev, 0xab);
+	if (udata8 & 0x40) {
+		u8_data |= (1 << 0);
+	}
+	else {
+		u8_data &= ~(1 << 0);
+	}
+	pci_write_config8(dev, 0xab, u8_data);
+
+	// LED[bit7]:GPIO66
+	u8_data = pci_read_config8(dev, 0x7e);
+	if (udata8 & 0x80) {
+		u8_data |= (1 << 1);
+	}
+	else {
+		u8_data &= ~(1 << 1);
+	}
+	pci_write_config8(dev, 0x7e, u8_data);
 
 }
diff --git a/src/mainboard/technexion/tim5690/vgabios.c b/src/mainboard/technexion/tim5690/vgabios.c
index f62bc87eb5..fe4b41cde9 100644
--- a/src/mainboard/technexion/tim5690/vgabios.c
+++ b/src/mainboard/technexion/tim5690/vgabios.c
@@ -30,39 +30,39 @@ static rs690_vbios_regs vbios_regs_local;
 /* Initialization interrupt function */
 static void vbios_fun_init(rs690_vbios_regs *vbios_regs)
 {
-        vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id;
-        vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard;
+	vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id;
+	vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard;
 }
 
 /* BIOS int15 function */
 int tim5690_int15_handler(void)
 {
-        int res = 0;
+	int res = 0;
 
-        printk(BIOS_DEBUG, "tim5690_int15_handler\n");
+	printk(BIOS_DEBUG, "tim5690_int15_handler\n");
 
-        switch (X86_EAX & 0xffff) {
-        case AMD_RS690_INT15:
-                switch (X86_EBX & 0xff) {
-                case 0x00:
-                        X86_EAX &= ~(0xff);
-                        X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id;
-                        res = 1;
-                        break;
-                case 0x05:
-                        X86_EAX &= ~(0xff);
-                        X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard;
-                        res = 1;
-                        break;
-                }
-                break;
-        default:
-                printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
-                                X86_EAX & 0xffff);
+	switch (X86_EAX & 0xffff) {
+	case AMD_RS690_INT15:
+		switch (X86_EBX & 0xff) {
+		case 0x00:
+			X86_EAX &= ~(0xff);
+			X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id;
+			res = 1;
+			break;
+		case 0x05:
+			X86_EAX &= ~(0xff);
+			X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard;
+			res = 1;
+			break;
+		}
 		break;
-        }
+	default:
+		printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
+				X86_EAX & 0xffff);
+		break;
+	}
 
-        return res;
+	return res;
 }
 
 /* Initialization VBIOS function */