diff options
author | Li-Ta Lo <ollie@lanl.gov> | 2004-09-07 21:20:53 +0000 |
---|---|---|
committer | Li-Ta Lo <ollie@lanl.gov> | 2004-09-07 21:20:53 +0000 |
commit | 7b08c116b9bb3aaf2059935e46f51446a27f93ee (patch) | |
tree | a830d7f98dad592076c2606edd552363c5e3264a | |
parent | 981faa09e4b7edf498b1b1f353cc100541abb859 (diff) |
removed unused code, code reformat
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1645 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r-- | src/mainboard/ibm/e325/mainboard.c | 1 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/Config.lb | 88 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/auto.c | 89 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/failover.c | 20 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/mainboard.c | 163 |
5 files changed, 111 insertions, 250 deletions
diff --git a/src/mainboard/ibm/e325/mainboard.c b/src/mainboard/ibm/e325/mainboard.c index e7b4cf464f..01969d6448 100644 --- a/src/mainboard/ibm/e325/mainboard.c +++ b/src/mainboard/ibm/e325/mainboard.c @@ -31,6 +31,7 @@ static void enumerate(struct chip *chip) printk_debug("Enumerating: %s\n", chip->control->name); } + /* update device operation for dynamic root */ dev_root.ops = &mainboard_operations; chip->dev = &dev_root; chip->bus = 0; diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 84df9b1ab9..721badb52a 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -6,26 +6,42 @@ uses LB_CKS_RANGE_END uses LB_CKS_LOC uses MAINBOARD uses ARCH +uses HAVE_HARD_RESET uses HARD_RESET_BUS uses HARD_RESET_DEVICE uses HARD_RESET_FUNCTION +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR -# -# -### -### Set all of the defaults for an x86 architecture -### +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 +default HARD_RESET_BUS=3 +default HARD_RESET_DEVICE=4 +default HARD_RESET_FUNCTION=0 -# -# ### -### Build the objects we have code for in this directory. +### Build code to export a programmable irq routing table ### +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=11 -config chip.h -register "fixup_scsi" = "1" -register "fixup_vga" = "1" +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 ## ## Move the default LinuxBIOS cmos range off of AMD RTC registers @@ -34,22 +50,43 @@ default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 default LB_CKS_LOC=123 +### +### Build code for SMP support +### Only worry about 2 micro processors +### +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=2 + +# +### +### Build code to setup a generic IOAPIC +### +default CONFIG_IOAPIC=1 + +### +### Clean up the motherboard id strings +### +default MAINBOARD_PART_NUMBER="S2885" +default MAINBOARD_VENDOR="Tyan" + +### +### Set all of the defaults for an x86 architecture +### + +arch i386 end + +### +### Build the objects we have code for in this directory. +### driver mainboard.o #dir /drvers/adaptec/7902 #dir /drivers/si/3114 #dir /drivers/intel/82551 -driver ti_firewire.o +#driver ti_firewire.o #dir /drivers/vga if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -# -default HARD_RESET_BUS=3 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 -# -# -arch i386 end # ### @@ -72,7 +109,7 @@ else mainboardinit cpu/i386/reset32.inc ldscript /cpu/i386/reset32.lds end -# + #### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc # @@ -149,6 +186,9 @@ mainboardinit cpu/k8/disable_mmx_sse.inc ### Include the secondary Configuration files ### dir /pc80 +config chip.h +register "fixup_scsi" = "1" +register "fixup_vga" = "1" northbridge amd/amdk8 "mc0" pci 0:18.0 @@ -192,7 +232,7 @@ northbridge amd/amdk8 "mc0" pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 - irq 0x70 = 1 + irq 0x70 = 1 irq 0x72 = 12 pnp 2e.6 off # CIR pnp 2e.7 off # GAME_MIDI_GIPO1 @@ -218,11 +258,9 @@ northbridge amd/amdk8 "mc1" pci 0:19.3 end -#dir /bioscall - cpu k8 "cpu0" - register "ldt0" = "{.chip = &amd8151, .ht_width=16, .ht_speed=600}" - register "ldt2" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}" + register "ldt0" = "{.chip = &amd8151, .ht_width=16, .ht_speed=600}" + register "ldt2" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}" end cpu k8 "cpu1" diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index 712ff731d1..e4c99d88ef 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -1,5 +1,4 @@ #define ASSEMBLY 1 - #include <stdint.h> #include <device/pci_def.h> #include <arch/io.h> @@ -26,38 +25,37 @@ static void hard_reset(void) { - set_bios_reset(); + set_bios_reset(); - /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); } static void soft_reset(void) { - set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } static void memreset_setup(void) { - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) @@ -84,21 +82,21 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) * [3] Route to Link 2 */ - uint32_t ret=0x00010101; /* default row entry */ + uint32_t ret = 0x00010101; /* default row entry */ + /* CPU0 LDT1 <-> LDT1 CPU1 */ static const unsigned int rows_2p[2][2] = { { 0x00050101, 0x00010404 }, { 0x00010404, 0x00050101 } }; - if(maxnodes>2) { + if (maxnodes > 2) { print_debug("this mainboard is only designed for 2 cpus\r\n"); - maxnodes=2; + maxnodes = 2; } - - if (!(node>=maxnodes || row>=maxnodes)) { - ret=rows_2p[node][row]; + if (!(node >= maxnodes || row >= maxnodes)) { + ret = rows_2p[node][row]; } return ret; @@ -168,68 +166,43 @@ static void main(void) int needs_reset; enable_lapic(); init_timer(); + if (cpu_init_detected()) { - asm("jmp __cpu_reset"); + asm volatile ("jmp __cpu_reset"); } + distinguish_cpu_resets(); if (!boot_cpu()) { stop_this_cpu(); } + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + setup_s2885_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if 0 - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); -#else needs_reset |= ht_setup_chains(ht_c, sizeof(ht_c)/sizeof(ht_c[0])); -#endif if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); } -#if 0 - dump_pci_devices(); -#endif #if 0 print_pci_devices(); #endif + enable_smbus(); + #if 0 dump_spd_registers(&cpu[0]); #endif + memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); #if 0 dump_pci_devices(); -#endif -#if 0 dump_pci_device(PCI_DEV(0, 0x18, 1)); #endif - - /* Check all of memory */ -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif -/* -#if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#else -#if TOTAL_CPUS < 2 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x00100000); -#else - // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x80100000); -#endif -#endif -*/ } diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c index b22abfea06..95d675bc20 100644 --- a/src/mainboard/tyan/s2885/failover.c +++ b/src/mainboard/tyan/s2885/failover.c @@ -60,17 +60,17 @@ static void main(void) goto fallback_image; } normal_image: - asm("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); cpu_reset: - asm("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ - : /* clobbers */ - ); + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); fallback_image: #if HAVE_REGPARM_SUPPORT return bist; diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c index 559f5b450e..2c01584310 100644 --- a/src/mainboard/tyan/s2885/mainboard.c +++ b/src/mainboard/tyan/s2885/mainboard.c @@ -9,164 +9,9 @@ unsigned long initial_apicid[CONFIG_MAX_CPUS] = { - 0,1 + 0, 1 }; -#if 0 -static void fixup_lsi_53c1030(struct device *pdev) -{ -// uint8_t byte; - uint16_t word; - - byte = 1; - pci_write_config8(pdev, 0xff, byte); - // Set the device id -// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030); - // Set the subsytem vendor id -// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN); - word = 0x10f1; - pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word); - // Set the subsytem id - word = 0x2880; - pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word); - // Disable writes to the device id - byte = 0; - pci_write_config8(pdev, 0xff, byte); - -// lsi_scsi_init(pdev); - -} -#endif - -#if 0 -static void print_pci_regs(struct device *dev) -{ - uint8_t byte; - int i; - - for(i=0;i<256;i++) { - byte = pci_read_config8(dev, i); - - if((i%16)==0) printk_debug("\n%02x:",i); - printk_debug(" %02x",byte); - } - printk_debug("\n"); - -// pci_write_config8(dev, 0x4, byte); - -} -#endif -#if 0 -static void print_mem(void) -{ - int i; - int low_1MB = 0; - for(i=low_1MB;i<low_1MB+1024*4;i++) { - if((i%16)==0) printk_debug("\n %08x:",i); - printk_debug(" %02x ",(unsigned char)*((unsigned char *)i)); - } - - for(i=low_1MB;i<low_1MB+1024*4;i++) { - if((i%16)==0) printk_debug("\n %08x:",i); - printk_debug(" %c ",(unsigned char)*((unsigned char *)i)); - } - } -#endif -#if 0 -static void amd8111_enable_rom(void) -{ - uint8_t byte; - struct device *dev; - - /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */ - /* Locate the amd8111 */ - dev = dev_find_device(0x1022, 0x7468, 0); - - /* Set the 4MB enable bit bit */ - byte = pci_read_config8(dev, 0x43); - byte |= 0x80; - pci_write_config8(dev, 0x43, byte); -} -#endif -#if 0 -static void onboard_scsi_fixup(void) -{ - struct device *dev; -#if 1 - unsigned char i,j,k; - - for(i=0;i<=6;i++) { - for(j=0;j<=0x1f;j++) { - for (k=0;k<=6;k++){ - dev = dev_find_slot(i, PCI_DEVFN(j, k)); - if (dev) { - printk_debug("%02x:%02x:%02x",i,j,k); - print_pci_regs(dev); - } - } - } - } -#endif - - -#if 0 - dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0); - if(!dev) { - printk_info("LSI_SCSI_FW_FIXUP: No Device Found!"); - return; - } - - lsi_scsi_init(dev); -#endif -// print_mem(); -// amd8111_enable_rom(); -} -#endif -#if 0 -static void vga_fixup(void) { - // we do this right here because: - // - all the hardware is working, and some VGA bioses seem to need - // that - // - we need page 0 below for linuxbios tables. -#if CONFIG_REALMODE_IDT == 1 - printk_debug("INSTALL REAL-MODE IDT\n"); - setup_realmode_idt(); -#endif -#if CONFIG_VGABIOS == 1 - printk_debug("DO THE VGA BIOS\n"); - do_vgabios(0x0600); - post_code(0x93); -#endif - -} - -#endif - - -static void -enable(struct chip *chip, enum chip_pass pass) -{ - - struct mainboard_tyan_s2885_config *conf = - (struct mainboard_tyan_s2885_config *)chip->chip_info; - - switch (pass) { - default: break; -// case CONF_PASS_PRE_CONSOLE: -// case CONF_PASS_PRE_PCI: -// case CONF_PASS_POST_PCI: - case CONF_PASS_PRE_BOOT: -// if (conf->fixup_scsi) - // onboard_scsi_fixup(); -// if (conf->fixup_vga) -// vga_fixup(); - printk_debug("mainboard fixup pass %d done\r\n", - pass); - break; - } - -} - static struct device_operations mainboard_operations = { .read_resources = root_dev_read_resources, .set_resources = root_dev_set_resources, @@ -180,6 +25,10 @@ static void enumerate(struct chip *chip) { struct chip *child; + if (chip->control && chip->control->name) { + printk_debug("Enumerating: %s\n", chip->control->name); + } + /* update device operation for dynamic root */ dev_root.ops = &mainboard_operations; chip->dev = &dev_root; @@ -188,8 +37,8 @@ static void enumerate(struct chip *chip) child->bus = &dev_root.link[0]; } } + struct chip_control mainboard_tyan_s2885_control = { - .enable = enable, .enumerate = enumerate, .name = "Tyan s2885 mainboard ", }; |