src/drivers: Add required space before opening parenthesis '('

Change-Id: I4d0087b2557862d04be54cf42f01b3223cb723ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16321
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

8 files changed, 21 insertions, 21 deletions

diff --git a/src/drivers/ati/ragexl/xlinit.c b/src/drivers/ati/ragexl/xlinit.c
index 3427b0e934..c5d440491e 100644
--- a/src/drivers/ati/ragexl/xlinit.c
+++ b/src/drivers/ati/ragexl/xlinit.c
@@ -528,7 +528,7 @@ static void ati_ragexl_init(struct device *dev)
 
 
 	res = dev->resource_list;
-	if(res->flags & IORESOURCE_IO) {
+	if (res->flags & IORESOURCE_IO) {
 		res = res->next;
 	}
 
@@ -542,7 +542,7 @@ static void ati_ragexl_init(struct device *dev)
 	/* Fix this to look for the correct index. */
 	//if (dev->resource_list && dev->resource_list->next)
         res = dev->resource_list->next->next;
-        if(res->flags & IORESOURCE_MEM) {
+        if (res->flags & IORESOURCE_MEM) {
 		info->ati_regbase = res2mmio(res, 0x400, 0); //using auxiliary register
         }
 
diff --git a/src/drivers/intel/fsp1_0/fsp_util.c b/src/drivers/intel/fsp1_0/fsp_util.c
index a3fef2db7c..b43f0df100 100644
--- a/src/drivers/intel/fsp1_0/fsp_util.c
+++ b/src/drivers/intel/fsp1_0/fsp_util.c
@@ -303,7 +303,7 @@ static void find_fsp_hob_update_mrc(void *unused)
 		print_hob_type_structure(0x000, FspHobListPtr);
 
 	#if IS_ENABLED(CONFIG_ENABLE_MRC_CACHE)
-		if(save_mrc_data(FspHobListPtr))
+		if (save_mrc_data(FspHobListPtr))
 			update_mrc_cache(NULL);
 		else
 			printk(BIOS_DEBUG,"Not updating MRC data in flash.\n");
diff --git a/src/drivers/intel/fsp1_1/ramstage.c b/src/drivers/intel/fsp1_1/ramstage.c
index b4a6af1626..dd1abbeab7 100644
--- a/src/drivers/intel/fsp1_1/ramstage.c
+++ b/src/drivers/intel/fsp1_1/ramstage.c
@@ -143,7 +143,7 @@ void fsp_run_silicon_init(FSP_INFO_HEADER *fsp_info_header, int is_s3_wakeup)
 	/* Mark graphics init done after SiliconInit if VBT was provided */
 #if IS_ENABLED(CONFIG_GOP_SUPPORT)
 	/* GraphicsConfigPtr doesn't exist in Quark X1000's FSP, so this needs
-	 * to be #if'd out instead of using if(). */
+	 * to be #if'd out instead of using if (). */
 	if (silicon_init_params.GraphicsConfigPtr)
 		gfx_set_init_done(1);
 #endif
diff --git a/src/drivers/intel/gma/intel_dp.c b/src/drivers/intel/gma/intel_dp.c
index 55839e149a..56ee73b7e2 100644
--- a/src/drivers/intel/gma/intel_dp.c
+++ b/src/drivers/intel/gma/intel_dp.c
@@ -642,7 +642,7 @@ static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
 	       (unsigned long)gtt_read(PCH_PP_STATUS),
 	       (unsigned long)gtt_read(PCH_PP_CONTROL));
 
-	for(i = 0, status = gtt_read(PCH_PP_STATUS); ((status & mask) != value) && (i < 5000);
+	for (i = 0, status = gtt_read(PCH_PP_STATUS); ((status & mask) != value) && (i < 5000);
 	    status = gtt_read(PCH_PP_STATUS)){
 		udelay(10);
 	}
@@ -972,7 +972,7 @@ intel_dp_get_link_status(struct intel_dp *intel_dp,
 					     DP_LINK_STATUS_SIZE);
 
 	printk(BIOS_SPEW, "%s:", __func__);
-	for(i = 0; i < /* !!sizeof(link_status) == 4*/
+	for (i = 0; i < /* !!sizeof(link_status) == 4*/
 		    DP_LINK_STATUS_SIZE; i++)
 		printk(BIOS_SPEW, " %02x", link_status[i]);
 	printk(BIOS_SPEW, "\n");
@@ -1308,7 +1308,7 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 			temp |= DP_TP_CTL_LINK_TRAIN_IDLE;
 			gtt_write(DP_TP_CTL(port), temp);
 
-			for(i = 0; i < 10; i++){
+			for (i = 0; i < 10; i++){
 				u32 status;
 				status = gtt_read(DP_TP_STATUS(port));
 				if (status & DP_TP_STATUS_IDLE_DONE)
diff --git a/src/drivers/ipmi/ipmi_kcs.c b/src/drivers/ipmi/ipmi_kcs.c
index 829b2f9ea1..e6d2e0bd7f 100644
--- a/src/drivers/ipmi/ipmi_kcs.c
+++ b/src/drivers/ipmi/ipmi_kcs.c
@@ -55,7 +55,7 @@ static int wait_ibf_timeout(int port)
 		if (!(ipmi_kcs_status(port) & IPMI_KCS_IBF))
 			return 0;
 		udelay(100);
-	} while(timeout--);
+	} while (timeout--);
 	printk(BIOS_ERR, "wait_ibf timeout!\n");
 	return timeout;
 }
@@ -67,7 +67,7 @@ static int wait_obf_timeout(int port)
 		if ((ipmi_kcs_status(port) & IPMI_KCS_OBF))
 			return 0;
 		udelay(100);
-	} while(timeout--);
+	} while (timeout--);
 
 	printk(BIOS_ERR, "wait_obf timeout!\n");
 	return timeout;
@@ -160,7 +160,7 @@ static int ipmi_kcs_send_message(int port, int netfn, int lun, int cmd,
 		return ret;
 	}
 
-	while(len-- > 1) {
+	while (len-- > 1) {
 		if ((ret = ipmi_kcs_send_data_byte(port, *msg++))) {
 			printk(BIOS_ERR, "IPMI BYTE WRITE failed\n");
 			return ret;
@@ -189,7 +189,7 @@ static int ipmi_kcs_read_message(int port, unsigned char *msg, int len)
 	if (wait_ibf_timeout(port))
 		return 1;
 
-	for(;;) {
+	for (;;) {
 		status = ipmi_kcs_status(port);
 
 		if (IPMI_KCS_STATE(status) == IPMI_KCS_STATE_IDLE)
diff --git a/src/drivers/net/ne2k.c b/src/drivers/net/ne2k.c
index b59fe082fd..ed56006ec4 100644
--- a/src/drivers/net/ne2k.c
+++ b/src/drivers/net/ne2k.c
@@ -153,7 +153,7 @@ unsigned long compute_ip_checksum_from_sram(unsigned short offset, unsigned shor
 	 * compute an ip style checksum.
 	 */
 	sum = 0;
-	for(i = 0; i < length; i++) {
+	for (i = 0; i < length; i++) {
 		unsigned long v;
 		v = eth_pio_read_byte((TX_START << 8)+i+offset, eth_nic_base);
 		if (i & 1) {
diff --git a/src/drivers/uart/uart8250mem.c b/src/drivers/uart/uart8250mem.c
index cf58423b86..4e53a92a46 100644
--- a/src/drivers/uart/uart8250mem.c
+++ b/src/drivers/uart/uart8250mem.c
@@ -62,7 +62,7 @@ static int uart8250_mem_can_tx_byte(void *base)
 static void uart8250_mem_tx_byte(void *base, unsigned char data)
 {
 	unsigned long int i = SINGLE_CHAR_TIMEOUT;
-	while(i-- && !uart8250_mem_can_tx_byte(base))
+	while (i-- && !uart8250_mem_can_tx_byte(base))
 		udelay(1);
 	uart8250_write(base, UART8250_TBR, data);
 }
@@ -70,7 +70,7 @@ static void uart8250_mem_tx_byte(void *base, unsigned char data)
 static void uart8250_mem_tx_flush(void *base)
 {
 	unsigned long int i = FIFO_TIMEOUT;
-	while(i-- && !(uart8250_read(base, UART8250_LSR) & UART8250_LSR_TEMT))
+	while (i-- && !(uart8250_read(base, UART8250_LSR) & UART8250_LSR_TEMT))
 		udelay(1);
 }
 
@@ -82,7 +82,7 @@ static int uart8250_mem_can_rx_byte(void *base)
 static unsigned char uart8250_mem_rx_byte(void *base)
 {
 	unsigned long int i = SINGLE_CHAR_TIMEOUT;
-	while(i-- && !uart8250_mem_can_rx_byte(base))
+	while (i-- && !uart8250_mem_can_rx_byte(base))
 		udelay(1);
 	if (i)
 		return uart8250_read(base, UART8250_RBR);
diff --git a/src/drivers/usb/ehci_debug.c b/src/drivers/usb/ehci_debug.c
index 57a14534de..cac043ebef 100644
--- a/src/drivers/usb/ehci_debug.c
+++ b/src/drivers/usb/ehci_debug.c
@@ -39,8 +39,8 @@ static int dbgp_enabled(void);
 # define dprintk(LEVEL, args...) \
 	do { if (!dbgp_enabled()) printk(LEVEL, ##args); } while (0)
 #else
-# define dbgp_print_data(x)	do {} while(0)
-# define dprintk(LEVEL, args...)   do {} while(0)
+# define dbgp_print_data(x)	do {} while (0)
+# define dprintk(LEVEL, args...)   do {} while (0)
 #endif
 
 #define DBGP_LEN_UPDATE(x, len) (((x) & ~0x0f) | ((len) & 0x0f))
@@ -460,8 +460,8 @@ try_next_port:
                 dprintk(BIOS_INFO, "PORTSC #%d: %08x\n", i, portsc);
         }
 
-	if(port_map_tried && (new_debug_port != debug_port)) {
-		if(--playtimes) {
+	if (port_map_tried && (new_debug_port != debug_port)) {
+		if (--playtimes) {
 			ehci_debug_select_port(debug_port);
 			goto try_next_time;
 		}
@@ -495,7 +495,7 @@ try_next_port:
 		cmd = read32(&ehci_regs->command);
 	} while ((cmd & CMD_RESET) && (--loop > 0));
 
-	if(!loop) {
+	if (!loop) {
 		dprintk(BIOS_INFO, "Could not reset EHCI controller.\n");
 		// on some systems it works without succeeding here.
 		// return -2;
@@ -525,7 +525,7 @@ try_next_port:
 		status = read32(&ehci_regs->status);
 	} while ((status & STS_HALT) && (--loop > 0));
 
-	if(!loop) {
+	if (!loop) {
 		dprintk(BIOS_INFO, "EHCI could not be started.\n");
 		return -3;
 	}