mainboard/intel/galileo: Add vboot support

Add the necessary files and changes to support vboot.

TEST=Build and run on Galileo Gen2 with a SparkFun CryptoShield

1.  Obtain and install a SparkFun CryptoShield.
    https://www.sparkfun.com/products/13183

2.  Edit src/mainboard/intel/galileo/Kconfig to select
    VBOOT_WITH_CRYPTO_SHIELD

3.  Use make menuconfig to update the config values and select a
    payload that will fit.  I used SeaBIOS which does not boot.

4.  Build coreboot

5.  Use the command file below to generate the signed coreboot image.

6.  Flash build/coreboot.rom onto the Galileo board

7.  The test is successful if verstage detects that it needs recovery
    after Phase 1.  This is expected because the image does not contain
    the GBB section.

8.  Flash build/coreboot.signed.bin onto the Galileo board

9.  The test is successful if verstage reaches Phase 4 and selects SLOT
    A to load the rest of the files.

commands:
gbb_utility -c 0x100,0x1000,0x7ce80,0x1000 gbb.blob

dd  conv=fdatasync  ibs=4096  obs=4096  count=1553  \
if=build/coreboot.rom  of=build/coreboot.signed.rom

dd  conv=fdatasync  obs=4096  obs=4096  seek=1553  if=gbb.blob  \
of=build/coreboot.signed.rom

dd  conv=fdatasync  ibs=4096  obs=4096  skip=1680  seek=1680  \
count=368  if=build/coreboot.rom  of=build/coreboot.signed.rom

gbb_utility                       \
--set --hwid='Galileo'            \
-r $PWD/keys/recovery_key.vbpubk  \
-k $PWD/keys/root_key.vbpubk      \
build/coreboot.signed.rom

3rdparty/vboot/scripts/image_signing/sign_firmware.sh  \
build/coreboot.signed.rom                              \
$PWD/keys                                              \
build/coreboot.signed.rom

Change-Id: I02eb0ef647cd34c13a5fe8be0bdbe1bb38524d0c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18821
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

6 files changed, 241 insertions, 3 deletions

diff --git a/src/mainboard/intel/galileo/Kconfig b/src/mainboard/intel/galileo/Kconfig
index e941448b48..f31ca5e9f7 100644
--- a/src/mainboard/intel/galileo/Kconfig
+++ b/src/mainboard/intel/galileo/Kconfig
@@ -1,7 +1,7 @@
 ##
 ## This file is part of the coreboot project.
 ##
-## Copyright (C) 2015-2016 Intel Corp.
+## Copyright (C) 2015-2017 Intel Corp.
 ##
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -147,4 +147,36 @@ config FSP_DEBUG_ALL
 	  FSP_CALLS_AND_STATUS, FSP_HEADER, POSTCAR_CONSOLE and VERIFY_HOBS
 	  or FSP 1.1 DISPLAY_FSP_ENTRY_POINTS
 
+config VBOOT_WITH_CRYPTO_SHIELD
+	bool "Verified boot using the Crypto Shield board"
+	default n
+	select COLLECT_TIMESTAMPS
+	select I2C_TPM
+	select MAINBOARD_HAS_I2C_TPM_ATMEL
+	select SEPARATE_VERSTAGE
+	select VBOOT
+	select VBOOT_STARTS_IN_BOOTBLOCK
+	select VBOOT_SOFT_REBOOT_WORKAROUND
+	select VBOOT_VBNV_CMOS
+	help
+	  Perform a verified boot using the TPM on the Crypto Shield board.
+
+config DRIVER_TPM_I2C_ADDR
+	hex "Address of the I2C TPM chip"
+	depends on VBOOT_WITH_CRYPTO_SHIELD
+	default 0x29
+	help
+	  I2C address of the TPM chip on the Crypto Shield board.
+
+config FMDFILE
+	string "FMAP description file in fmd format"
+	depends on VBOOT
+	default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/vboot.fmd"
+	help
+	  The build system creates a default FMAP from ROM_SIZE and CBFS_SIZE,
+	  but in some cases more complex setups are required.
+
+	  When an FMD descriptionn file is specified, the build system uses it
+	  instead of creating a default FMAP file.
+
 endif # BOARD_INTEL_QUARK
diff --git a/src/mainboard/intel/galileo/Makefile.inc b/src/mainboard/intel/galileo/Makefile.inc
index 16b2b4ac99..f2fda318c0 100644
--- a/src/mainboard/intel/galileo/Makefile.inc
+++ b/src/mainboard/intel/galileo/Makefile.inc
@@ -20,8 +20,13 @@ endif
 bootblock-y += gpio.c
 bootblock-y += reg_access.c
 
+verstage-y += gpio.c
+verstage-y += reg_access.c
+verstage-$(CONFIG_VBOOT) += vboot.c
+
 romstage-y += gpio.c
 romstage-y += reg_access.c
+romstage-$(CONFIG_VBOOT) += vboot.c
 
 postcar-y += gpio.c
 postcar-y += reg_access.c
diff --git a/src/mainboard/intel/galileo/gen1.h b/src/mainboard/intel/galileo/gen1.h
index 23b23091d2..524daf8f67 100644
--- a/src/mainboard/intel/galileo/gen1.h
+++ b/src/mainboard/intel/galileo/gen1.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2016 Intel Corp.
+ * Copyright (C) 2016-2017 Intel Corp.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -150,3 +150,29 @@ static const struct reg_script gen1_i2c_0x21_init[] = {
 
 	REG_SCRIPT_END
 };
+
+static const struct reg_script gen1_tpm_reset_0x20[] = {
+	/* Reset the TPM using SW_RESET_N_SHLD (GPORT5_BIT1):
+	 * low, output, delay, input
+	 */
+	REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT5, ~BIT1),
+	REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 5),
+	REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT1),
+	TIME_DELAY_USEC(5),
+	REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, BIT1),
+
+	REG_SCRIPT_END
+};
+
+static const struct reg_script gen1_tpm_reset_0x21[] = {
+	/* Reset the TPM using SW_RESET_N_SHLD (GPORT5_BIT1):
+	 * low, output, delay, input
+	 */
+	REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT5, ~BIT1),
+	REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 5),
+	REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT1),
+	TIME_DELAY_USEC(5),
+	REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, BIT1),
+
+	REG_SCRIPT_END
+};
diff --git a/src/mainboard/intel/galileo/gen2.h b/src/mainboard/intel/galileo/gen2.h
index 10c832198e..253976e6df 100644
--- a/src/mainboard/intel/galileo/gen2.h
+++ b/src/mainboard/intel/galileo/gen2.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2016 Intel Corp.
+ * Copyright (C) 2016-2017 Intel Corp.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -98,3 +98,15 @@ static const struct reg_script gen2_i2c_init[] = {
 
 	REG_SCRIPT_END
 };
+
+static const struct reg_script gen2_tpm_reset[] = {
+	/* Reset the TPM using SW_RESET_N_SHLD (EXP1 P1.7):
+	 * low, output, delay, input
+	 */
+	REG_I2C_AND(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_OUTPUT1, ~BIT7),
+	REG_I2C_AND(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_CONFIG1, ~BIT7),
+	TIME_DELAY_USEC(5),
+	REG_I2C_OR(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_CONFIG1, BIT7),
+
+	REG_SCRIPT_END
+};
diff --git a/src/mainboard/intel/galileo/vboot.c b/src/mainboard/intel/galileo/vboot.c
new file mode 100644
index 0000000000..cc8831eaeb
--- /dev/null
+++ b/src/mainboard/intel/galileo/vboot.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <assert.h>
+#include <bootmode.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/i2c.h>
+#include <lib.h>
+#include <soc/i2c.h>
+#include <soc/reg_access.h>
+#include "reg_access.h"
+#include "gen1.h"
+#include "gen2.h"
+#include <spi_flash.h>
+#include <vboot/vboot_common.h>
+
+int clear_recovery_mode_switch(void)
+{
+	/* Nothing to do */
+	return 0;
+}
+
+int get_developer_mode_switch(void)
+{
+	return 0;
+}
+
+int get_recovery_mode_switch(void)
+{
+	return 0;
+}
+
+int get_sw_write_protect_state(void)
+{
+	/* Not write protected */
+	return 0;
+}
+
+int get_write_protect_state(void)
+{
+	/* Not write protected */
+	return 0;
+}
+
+void log_recovery_mode_switch(void)
+{
+}
+
+void verstage_mainboard_init(void)
+{
+	const struct reg_script *script;
+
+	/* Crypto Shield I2C Addresses:
+	 *
+	 * 0x29: AT97S3204T - TPM 1.2
+	 * 0x50: ATAES132 - AES-128
+	 * 0x60: ATECC108 - Elliptical Curve
+	 * 0x64: ATSHA204 - SHA-256
+	 * 0x68: DS3231M - RTC
+	 */
+
+	/* Determine the correct script for the board */
+	if (IS_ENABLED(CONFIG_GALILEO_GEN2))
+		script = gen2_i2c_init;
+	else
+		/* Determine which I2C address is in use */
+		script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
+			& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
+			? gen1_i2c_0x20_init : gen1_i2c_0x21_init;
+
+	/* Direct the I2C SDA and SCL signals to the Arduino connector */
+	reg_script_run(script);
+}
+
+void __attribute__((weak)) vboot_platform_prepare_reboot(void)
+{
+	const struct reg_script *script;
+
+	/* Crypto Shield I2C Addresses:
+	 *
+	 * 0x29: AT97S3204T - TPM 1.2
+	 * 0x50: ATAES132 - AES-128
+	 * 0x60: ATECC108 - Elliptical Curve
+	 * 0x64: ATSHA204 - SHA-256
+	 * 0x68: DS3231M - RTC
+	 */
+
+	/* Determine the correct script for the board */
+	if (IS_ENABLED(CONFIG_GALILEO_GEN2))
+		script = gen2_tpm_reset;
+	else
+		/* Determine which I2C address is in use */
+		script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
+			& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
+			? gen1_tpm_reset_0x20 : gen1_tpm_reset_0x21;
+
+	/* Reset the TPM */
+	reg_script_run(script);
+}
diff --git a/src/mainboard/intel/galileo/vboot.fmd b/src/mainboard/intel/galileo/vboot.fmd
new file mode 100644
index 0000000000..55e41e56aa
--- /dev/null
+++ b/src/mainboard/intel/galileo/vboot.fmd
@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2016-2017 Intel Corporation
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but without any warranty; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+FLASH@0xff800000 0x800000 {
+	SI_ALL@0x0 0x200000 {
+		SI_DESC@0x0 0x1000
+		SI_ME@0x1000 0x1ff000
+	}
+	SI_BIOS@0x200000 0x600000 {
+		RW_SECTION_A@0x0 0xf0000 {
+			VBLOCK_A@0x0 0x10000
+			FW_MAIN_A(CBFS)@0x10000 0xdffc0
+			RW_FWID_A@0xeffc0 0x40
+		}
+		RW_SECTION_B@0xf0000 0xf0000 {
+			VBLOCK_B@0x0 0x10000
+			FW_MAIN_B(CBFS)@0x10000 0xdffc0
+			RW_FWID_B@0xeffc0 0x40
+		}
+		RW_MRC_CACHE@0x1e0000 0x10000
+		RW_ELOG@0x1f0000 0x4000
+		RW_SHARED@0x1f4000 0x4000 {
+			SHARED_DATA@0x0 0x2000
+			VBLOCK_DEV@0x2000 0x2000
+		}
+		RW_VPD@0x1f8000 0x2000
+		RW_NVRAM@0x1fa000 0x6000
+		RW_LEGACY(CBFS)@0x200000 0x200000
+		WP_RO@0x400000 0x200000 {
+			RO_VPD@0x0 0x4000
+			RO_UNUSED@0x4000 0xc000
+			RO_SECTION@0x10000 0x1f0000 {
+				FMAP@0x0 0x800
+				RO_FRID@0x800 0x40
+				RO_FRID_PAD@0x840 0x7c0
+				GBB@0x1000 0x7f000
+				COREBOOT(CBFS)@0x80000 0x170000
+			}
+		}
+	}
+}