mb/supermicro/x11-lga1151-series: add x11ssh-f board as a variant

This adds another X11 series board, the X11SSH-F, which is similiar to
X11SSH-TF but differs in PCIe interfaces/devices, ethernet interfaces.

Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I92c32bff861f0b5697aea52ff282fae76b3b78ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>

6 files changed, 488 insertions, 0 deletions

diff --git a/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-f/x11ssh-f.md b/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-f/x11ssh-f.md
new file mode 100644
index 0000000000..f009bbe2ae
--- /dev/null
+++ b/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-f/x11ssh-f.md
@@ -0,0 +1,103 @@
+# Supermicro X11SSH-F
+
+This section details how to run coreboot on the [Supermicro X11SSH-F].
+
+## Flashing coreboot
+
+The board can be flashed externally. [STM32-based programmers] worked.
+
+The flash IC "W25Q128.V" (detected by flashrom) can be found near PCH PCIe Slot 4. It is sometime
+socketed, and covered by a sticker, hindering the observation of its precise model.
+
+It can be programmed in-system with a clip like pomona 5250.
+
+## BMC (IPMI)
+
+This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC firmware resides in a
+32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a
+[MX25L25635F].
+
+## IGD
+
+If an IGD is integrated with CPU, it will be enabled on this board. Though there is no video output
+for it (The onboard VGA port is connected to BMC), it is said to be capable of being used for compute
+tasks, or for offloading graphics rendering via "muxless" [vga_witcheroo].
+
+## Tested and working
+
+- SeaBIOS payload to boot Kali Linux live USB
+- ECC ram (Linux' ie31200 driver works)
+- Integrated graphics device available without output
+- USB ports
+- Ethernet
+- SATA ports
+- RS232 external
+- PCIe slots
+- BMC (IPMI)
+- VGA on Aspeed
+- TPM on TPM expansion header
+
+## Known issues
+
+- See general issue section
+- S3 resume not working (vendor and coreboot)
+- SeaBIOS cannot make use of VGA on Aspeed (even if IGD is disabled)
+
+## ToDo
+
+- Fix known issues
+- Testing other payloads
+
+## Technology
+
+```eval_rst
++------------------+--------------------------------------------------+
+| CPU              | Intel Kaby Lake                                  |
++------------------+--------------------------------------------------+
+| PCH              | Intel C236                                       |
++------------------+--------------------------------------------------+
+| Coprocessor      | Intel SPS (server version of the ME)             |
++------------------+--------------------------------------------------+
+| Super I/O        | ASPEED AST2400                                   |
++------------------+--------------------------------------------------+
+| Ethernet         | 2x Intel I210-AT 1 GbE                           |
+|                  | 1x dedicated BMC                                 |
++------------------+--------------------------------------------------+
+| PCIe slots       | 1x 3.0 x8                                        |
+|                  | 1x 3.0 x8 (in x16)                               |
+|                  | 1x 3.0 x4 (in x8)                                |
+|                  | 1x 3.0 x2 (in M.2 slot with key M)               |
++------------------+--------------------------------------------------+
+| USB slots        | 2x USB 2.0 (ext)                                 |
+|                  | 2x USB 3.0 (ext)                                 |
+|                  | 1x USB 3.0 (int)                                 |
+|                  | 1x dual USB 3.0 header                           |
+|                  | 2x dual USB 2.0 header                           |
++------------------+--------------------------------------------------+
+| SATA slots       | 8x S-ATA III                                     |
++------------------+--------------------------------------------------+
+| Other slots      | 1x RS232 (ext)                                   |
+|                  | 1x RS232 header                                  |
+|                  | 1x TPM header                                    |
+|                  | 1x Power SMB header                              |
+|                  | 5x PWM Fan connector                             |
+|                  | 2x I-SGPIO                                       |
+|                  | 2x S-ATA DOM Power connector                     |
+|                  | 1x XDP Port (connector may absent)               |
+|                  | 1x External BMC I2C Header (for IPMI card)       |
+|                  | 1x Chassis Intrusion Header                      |
++------------------+--------------------------------------------------+
+```
+
+## Extra links
+
+- [Supermicro X11SSH-F]
+- [Board manual]
+
+[Supermicro X11SSH-F]: https://www.supermicro.com/en/products/motherboard/X11SSH-F
+[Board manual]: https://www.supermicro.com/manuals/motherboard/C236/MNL-1778.pdf
+[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376
+[IPMI]: ../../../../drivers/ipmi_kcs.md
+[MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf
+[STM32-based programmers]: https://github.com/dword1511/stm32-vserprog
+[vga_switcheroo]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/vga-switcheroo.html
diff --git a/src/mainboard/supermicro/x11-lga1151-series/Kconfig b/src/mainboard/supermicro/x11-lga1151-series/Kconfig
index a446835a75..c4df48489d 100644
--- a/src/mainboard/supermicro/x11-lga1151-series/Kconfig
+++ b/src/mainboard/supermicro/x11-lga1151-series/Kconfig
@@ -25,6 +25,7 @@ config MAINBOARD_PART_NUMBER
 	string
 	default "X11SSH-TF"	if BOARD_SUPERMICRO_X11SSH_TF
 	default "X11SSM-F"	if BOARD_SUPERMICRO_X11SSM_F
+	default "X11SSH-F"	if BOARD_SUPERMICRO_X11SSH_F
 
 config MAINBOARD_DIR
 	string
@@ -34,6 +35,7 @@ config VARIANT_DIR
 	string
 	default "x11ssh-tf"	if BOARD_SUPERMICRO_X11SSH_TF
 	default "x11ssm-f"	if BOARD_SUPERMICRO_X11SSM_F
+	default "x11ssh-f"	if BOARD_SUPERMICRO_X11SSH_F
 
 config OVERRIDE_DEVICETREE
 	string
@@ -89,5 +91,6 @@ config SUPERMICRO_BOARDID
 	string
 	default "0896"	if BOARD_SUPERMICRO_X11SSM_F
 	default "089C"	if BOARD_SUPERMICRO_X11SSH_TF
+	default "0884"	if BOARD_SUPERMICRO_X11SSH_F
 
 endif  # BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
diff --git a/src/mainboard/supermicro/x11-lga1151-series/Kconfig.name b/src/mainboard/supermicro/x11-lga1151-series/Kconfig.name
index 7b2eaaffcb..7cb19aea90 100644
--- a/src/mainboard/supermicro/x11-lga1151-series/Kconfig.name
+++ b/src/mainboard/supermicro/x11-lga1151-series/Kconfig.name
@@ -5,3 +5,7 @@ config BOARD_SUPERMICRO_X11SSH_TF
 config BOARD_SUPERMICRO_X11SSM_F
 	bool "X11SSM-F"
 	select BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
+
+config BOARD_SUPERMICRO_X11SSH_F
+	bool "X11SSH-F"
+	select BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/board_info.txt b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/board_info.txt
new file mode 100644
index 0000000000..bf0cd992bc
--- /dev/null
+++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/board_info.txt
@@ -0,0 +1,7 @@
+Category: server
+Vendor name: Supermicro
+Board name: X11SSH-F
+Board URL: https://www.supermicro.com/en/products/motherboard/X11SSH-F
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/include/variant/gpio.h b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/include/variant/gpio.h
new file mode 100644
index 0000000000..93e0574409
--- /dev/null
+++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/include/variant/gpio.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _GPIO_X11SSH_F_H
+#define _GPIO_X11SSH_F_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+static const struct pad_config gpio_table[] = {
+	/* GPIO Group GPP_A */
+	PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A11, NONE, DEEP, NF1),
+	PAD_NC(GPP_A12, NONE),
+	PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
+	PAD_NC(GPP_A17, NONE),
+	PAD_NC(GPP_A18, NONE),
+	/* GPP_A19 - RESERVED */
+	PAD_NC(GPP_A20, NONE),
+	PAD_NC(GPP_A21, NONE),
+	PAD_NC(GPP_A22, NONE),
+	PAD_NC(GPP_A23, NONE),
+	PAD_CFG_GPO(GPP_B0, 1, DEEP),
+	PAD_CFG_GPO(GPP_B1, 1, DEEP),
+	PAD_NC(GPP_B2, NONE),
+	PAD_NC(GPP_B3, NONE),
+	PAD_NC(GPP_B4, NONE),
+	PAD_NC(GPP_B5, NONE),
+	PAD_NC(GPP_B6, NONE),
+	PAD_NC(GPP_B7, NONE),
+	PAD_NC(GPP_B8, NONE),
+	PAD_NC(GPP_B9, NONE),
+	PAD_NC(GPP_B10, NONE),
+	PAD_CFG_GPO(GPP_B11, 0, DEEP),
+	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_B14, NONE, PLTRST, NF1),
+	PAD_NC(GPP_B15, NONE),
+	PAD_NC(GPP_B16, NONE),
+	PAD_NC(GPP_B17, NONE),
+	PAD_NC(GPP_B18, NONE),
+	PAD_NC(GPP_B19, NONE),
+	PAD_CFG_GPO(GPP_B20, 1, PLTRST),
+	PAD_NC(GPP_B21, NONE),
+	PAD_NC(GPP_B22, NONE),
+	PAD_CFG_NF(GPP_B23, NONE, DEEP, NF2),
+
+	/* GPIO Group GPP_C */
+	/* GPP_C0 - RESERVED */
+	/* GPP_C1 - RESERVED */
+	PAD_NC(GPP_C2, NONE),
+	/* GPP_C3 - RESERVED */
+	/* GPP_C4 - RESERVED */
+	PAD_CFG_GPO(GPP_C5, 1, DEEP),
+	/* GPP_C6 - RESERVED */
+	/* GPP_C7 - RESERVED */
+	PAD_NC(GPP_C8, NONE),
+	PAD_NC(GPP_C9, NONE),
+	PAD_NC(GPP_C10, NONE),
+	PAD_NC(GPP_C11, NONE),
+	PAD_NC(GPP_C12, NONE),
+	PAD_NC(GPP_C13, NONE),
+	PAD_NC(GPP_C14, NONE),
+	PAD_NC(GPP_C15, NONE),
+	PAD_NC(GPP_C16, NONE),
+	PAD_NC(GPP_C17, NONE),
+	PAD_NC(GPP_C18, NONE),
+	PAD_NC(GPP_C19, NONE),
+	PAD_NC(GPP_C20, NONE),
+	PAD_NC(GPP_C21, NONE),
+	PAD_CFG_GPI_SMI(GPP_C22, 20K_PU, DEEP, EDGE_SINGLE, NONE),
+	PAD_NC(GPP_C23, NONE),
+
+	/* GPIO Group GPP_D */
+	PAD_NC(GPP_D0, NONE),
+	PAD_CFG_GPO(GPP_D1, 1, DEEP),
+	PAD_CFG_GPI_NMI(GPP_D2, 20K_PU, DEEP, EDGE_SINGLE, NONE),
+	PAD_NC(GPP_D3, NONE),
+	PAD_CFG_GPO(GPP_D4, 0, PLTRST),
+	PAD_NC(GPP_D5, NONE),
+	PAD_NC(GPP_D6, NONE),
+	PAD_NC(GPP_D7, NONE),
+	PAD_NC(GPP_D8, NONE),
+	PAD_NC(GPP_D9, NONE),
+	PAD_NC(GPP_D10, NONE),
+	PAD_NC(GPP_D11, NONE),
+	PAD_NC(GPP_D12, NONE),
+	PAD_NC(GPP_D13, NONE),
+	PAD_NC(GPP_D14, NONE),
+	PAD_NC(GPP_D15, NONE),
+	PAD_NC(GPP_D16, NONE),
+	PAD_NC(GPP_D17, NONE),
+	PAD_CFG_GPO(GPP_D18, 1, PLTRST),
+	PAD_CFG_GPO(GPP_D19, 1, PLTRST),
+	PAD_NC(GPP_D20, NONE),
+	PAD_CFG_GPO(GPP_D21, 0, DEEP),
+	PAD_NC(GPP_D22, NONE),
+	PAD_NC(GPP_D23, NONE),
+
+	/* GPIO Group GPP_E */
+	PAD_NC(GPP_E0, NONE),
+	PAD_NC(GPP_E1, NONE),
+	PAD_NC(GPP_E2, NONE),
+	PAD_NC(GPP_E3, NONE),
+	PAD_NC(GPP_E4, NONE),
+	PAD_NC(GPP_E5, NONE),
+	PAD_CFG_GPI_NMI(GPP_E6, 20K_PU, PLTRST, EDGE_SINGLE, NONE),
+	PAD_NC(GPP_E7, NONE),
+	PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1),
+
+	/* GPIO Group GPP_F */
+	PAD_NC(GPP_F0, NONE),
+	PAD_NC(GPP_F1, NONE),
+	PAD_NC(GPP_F2, NONE),
+	PAD_NC(GPP_F3, NONE),
+	PAD_NC(GPP_F4, NONE),
+	PAD_CFG_GPI_APIC(GPP_F5, NONE, PLTRST),
+	PAD_CFG_GPO(GPP_F6, 1, PLTRST),
+	PAD_CFG_GPO(GPP_F7, 1, PLTRST),
+	PAD_CFG_GPO(GPP_F8, 1, PLTRST),
+	PAD_NC(GPP_F9, NONE),
+	PAD_CFG_NF(GPP_F10, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
+	PAD_NC(GPP_F14, NONE),
+	PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
+	PAD_NC(GPP_F17, NONE),
+	PAD_NC(GPP_F18, NONE),
+	PAD_NC(GPP_F19, NONE),
+	PAD_NC(GPP_F20, NONE),
+	PAD_NC(GPP_F21, NONE),
+	PAD_NC(GPP_F22, NONE),
+	PAD_CFG_GPO(GPP_F23, 0, RSMRST),
+	PAD_NC(GPP_G0, NONE),
+	PAD_NC(GPP_G1, NONE),
+	PAD_NC(GPP_G2, NONE),
+	PAD_NC(GPP_G3, NONE),
+	PAD_NC(GPP_G4, NONE),
+	PAD_NC(GPP_G5, NONE),
+	PAD_NC(GPP_G6, NONE),
+	PAD_NC(GPP_G7, NONE),
+	PAD_NC(GPP_G8, NONE),
+	PAD_NC(GPP_G9, NONE),
+	PAD_NC(GPP_G10, NONE),
+	PAD_NC(GPP_G11, NONE),
+	PAD_NC(GPP_G12, NONE),
+	PAD_NC(GPP_G13, NONE),
+	PAD_NC(GPP_G14, NONE),
+	PAD_NC(GPP_G15, NONE),
+	PAD_NC(GPP_G16, NONE),
+	PAD_NC(GPP_G17, NONE),
+	PAD_CFG_NF(GPP_G18, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_G19, NONE, DEEP, NF1),
+	PAD_NC(GPP_G20, NONE),
+	PAD_NC(GPP_G21, NONE),
+	PAD_NC(GPP_G22, NONE),
+	PAD_NC(GPP_G23, NONE),
+	PAD_CFG_GPO(GPP_H0, 1, DEEP),
+	PAD_NC(GPP_H1, NONE),
+	PAD_CFG_GPO(GPP_H2, 1, DEEP),
+	PAD_CFG_NF(GPP_H3, NONE, DEEP, NF1),
+	PAD_NC(GPP_H4, NONE),
+	PAD_CFG_GPO(GPP_H5, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H6, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H7, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H8, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H9, 1, PLTRST),
+	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF1),
+	PAD_NC(GPP_H12, NONE),
+	PAD_CFG_NF(GPP_H13, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_H14, NONE, DEEP, NF1),
+	PAD_NC(GPP_H15, NONE),
+	PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
+	PAD_NC(GPP_H18, NONE),
+	PAD_CFG_GPO(GPP_H19, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H20, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H21, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H22, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H23, 1, PLTRST),
+
+	/* GPIO Group GPD */
+	PAD_NC(GPD0, NONE),
+	PAD_NC(GPD1, NONE),
+	PAD_CFG_NF(GPD2, NONE, PWROK, NF1),
+	PAD_CFG_NF(GPD3, NONE, PWROK, NF1),
+	PAD_CFG_NF(GPD4, NONE, PWROK, NF1),
+	PAD_CFG_NF(GPD5, NONE, PWROK, NF1),
+	PAD_CFG_NF(GPD6, NONE, PWROK, NF1),
+	PAD_NC(GPD7, NONE),
+	PAD_CFG_NF(GPD8, NONE, PWROK, NF1),
+	PAD_NC(GPD9, NONE),
+	PAD_NC(GPD10, NONE),
+	PAD_NC(GPD11, NONE),
+
+	/* GPIO Group GPP_I */
+	PAD_CFG_NF(GPP_I0, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I1, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I2, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I3, NONE, PLTRST, NF1),
+	PAD_NC(GPP_I4, NONE),
+	PAD_CFG_NF(GPP_I5, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I6, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I7, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I8, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I9, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_I10, NONE, DEEP, NF1),
+};
+
+static const struct pad_config early_gpio_table[] = {
+	/* Early LPC configuration in romstage */
+	PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
+	PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
+};
+
+#endif /* _GPIO_X11SSH_F_H */
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb
new file mode 100644
index 0000000000..c3f4bf1e6f
--- /dev/null
+++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb
@@ -0,0 +1,129 @@
+chip soc/intel/skylake
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route. i.e. If this route changes then the affected GPE
+	# offset bits also need to be changed.
+	register "gpe0_dw0" = "GPP_B"
+	register "gpe0_dw1" = "GPP_D"
+	register "gpe0_dw2" = "GPP_E"
+
+	register "gen1_dec" = "0x007c0a01"	# Super IO SWC
+	register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
+
+	# Additional FSP Configuration
+	# This board has an IGD with no output.
+	register "PrimaryDisplay" = "Display_Auto"
+
+	# USB configuration
+	# USB2/3
+	register "usb2_ports[0]"	= "USB2_PORT_MID(OC0)"
+	register "usb2_ports[1]"	= "USB2_PORT_MID(OC0)"
+
+	# ?
+	register "usb2_ports[14]"	= "USB2_PORT_MID(OC0)"
+	register "usb2_ports[15]"	= "USB2_PORT_MID(OC0)"
+
+	# USB4/5
+	register "usb2_ports[2]"	= "USB2_PORT_MID(OC1)"
+	register "usb2_ports[3]"	= "USB2_PORT_MID(OC1)"
+
+	# USB0/1
+	register "usb2_ports[4]"	= "USB2_PORT_MID(OC2)"
+	register "usb2_ports[5]"	= "USB2_PORT_MID(OC2)"
+
+	# USB9/10 (USB3.0)
+	register "usb2_ports[8]"	= "USB2_PORT_MID(OC3)"
+	register "usb2_ports[12]"	= "USB2_PORT_MID(OC3)"
+	register "usb3_ports[3]"	= "USB3_PORT_DEFAULT(OC3)"
+	register "usb3_ports[4]"	= "USB3_PORT_DEFAULT(OC3)"
+
+	# USB6/7 (USB3.0)
+	register "usb2_ports[10]"	= "USB2_PORT_MID(OC4)"
+	register "usb2_ports[11]"	= "USB2_PORT_MID(OC4)"
+	register "usb3_ports[1]"	= "USB3_PORT_DEFAULT(OC4)"
+	register "usb3_ports[2]"	= "USB3_PORT_DEFAULT(OC4)"
+
+	# USB8 (USB3.0)
+	register "usb2_ports[9]"	= "USB2_PORT_MID(OC5)"
+	register "usb3_ports[0]"	= "USB3_PORT_DEFAULT(OC5)"
+
+	# IPMI USB HUB
+	register "usb2_ports[13]"	= "USB2_PORT_MID(OC_SKIP)"
+
+	device domain 0 on
+		device pci 01.0 on
+			smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8(IN X16)" "SlotDataBusWidth8X"
+		end			# CPU PCIE Slot (JPCIE3)
+		device pci 01.1 on	# CPU PCIE Slot (JPCIE2)
+			smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8" "SlotDataBusWidth8X"
+		end
+		device pci 02.0 on end	# Integrated Graphics Device (No Output)
+		device pci 1c.0 on	# PCI Express Port 1
+			register "PcieRpEnable[0]" = "1"
+			device pci 00.0 on end	# GbE
+		end
+		device pci 1c.1 on	# PCI Express Port 2
+			register "PcieRpEnable[1]" = "1"
+			device pci 00.0 on end	# GbE
+		end
+		device pci 1c.4 on	# PCI Express Port 5
+			register "PcieRpEnable[4]" = "1"
+			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2 2280" "SlotDataBusWidth2X"
+		end
+		device pci 1c.6 on	# PCI Express Port 7
+			register "PcieRpEnable[6]" = "1"
+			device pci 00.0 on	# Aspeed PCI Bridge
+				device pci 00.0 on end	# Aspeed 2400 VGA
+			end
+		end
+		device pci 1d.0 on	# PCI Express Port 9 (Slot JPCIE1)
+			register "PcieRpEnable[8]" = "1"
+			smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthLong" "PCH SLOT4 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X"
+		end
+		device pci 1f.0 on	# LPC Interface
+			chip drivers/ipmi
+				# On cold boot it takes a while for the BMC to start the IPMI service
+				register "wait_for_bmc" = "1"
+				register "bmc_boot_timeout" = "60"
+				device pnp ca2.0 on end	# IPMI KCS
+			end
+			chip superio/common
+				device pnp 2e.0 on
+					chip superio/aspeed/ast2400
+						device pnp 2e.2 on	# SUART1
+							io 0x60 = 0x3f8
+							irq 0x70 = 4
+							drq 0xf0 = 0x00
+						end
+						device pnp 2e.3 on	# SUART2
+							io 0x60 = 0x2f8
+							irq 0x70 = 3
+							drq 0xf0 = 0x00
+						end
+						device pnp 2e.4 on	# SWC
+							io 0x60 = 0xa00
+							io 0x62 = 0xa10
+							io 0x64 = 0xa20
+							io 0x66 = 0xa30
+							irq 0x70 = 0x00
+						end
+						device pnp 2e.5 off end	# KBC
+						device pnp 2e.7 on	# GPIO
+							irq 0x70 = 0x00
+						end
+						device pnp 2e.b off end	# SUART3
+						device pnp 2e.c off end	# SUART4
+						device pnp 2e.d on	# iLPC2AHB
+							irq 0x70 = 0x00
+						end
+						device pnp 2e.e on	# Mailbox
+							io 0x60 = 0xa40
+							irq 0x70 = 0x00
+						end
+					end
+				end
+			end
+		end
+	end
+end