summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorElyes HAOUAS <ehaouas@noos.fr>2016-09-29 19:57:09 +0200
committerKyösti Mälkki <kyosti.malkki@gmail.com>2016-10-01 09:11:10 +0200
commit08449eb5831136833eca1ce904115025a14cfda8 (patch)
tree0dca97b1df3b90a0963f89dc4593c519670236b1
parent75b2237473e46a84c5673de35f42a6197b21e6df (diff)
mainboard/amd/serengeti_cheetah: Use tabs for indents
Change-Id: If47f0c072399fe8291bd8e41920d828f649ec49f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16817 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
-rw-r--r--src/mainboard/amd/serengeti_cheetah/mb_sysconf.h18
-rw-r--r--src/mainboard/amd/serengeti_cheetah/romstage.c114
2 files changed, 66 insertions, 66 deletions
diff --git a/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h b/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h
index e1c518071c..2aeede0793 100644
--- a/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h
+++ b/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h
@@ -22,18 +22,18 @@ struct mb_sysconf_t {
unsigned char bus_8111_0;
unsigned char bus_8111_1;
- unsigned char bus_8132a[7][3];
+ unsigned char bus_8132a[7][3];
- unsigned char bus_8151[7][2];
+ unsigned char bus_8151[7][2];
- unsigned apicid_8111;
- unsigned apicid_8132_1;
- unsigned apicid_8132_2;
- unsigned apicid_8132a[7][2];
+ unsigned apicid_8111;
+ unsigned apicid_8132_1;
+ unsigned apicid_8132_2;
+ unsigned apicid_8132a[7][2];
- unsigned sbdn3;
- unsigned sbdn3a[7];
- unsigned sbdn5[7];
+ unsigned sbdn3;
+ unsigned sbdn3a[7];
+ unsigned sbdn5[7];
};
diff --git a/src/mainboard/amd/serengeti_cheetah/romstage.c b/src/mainboard/amd/serengeti_cheetah/romstage.c
index 53adf6c274..fff950af25 100644
--- a/src/mainboard/amd/serengeti_cheetah/romstage.c
+++ b/src/mainboard/amd/serengeti_cheetah/romstage.c
@@ -38,8 +38,8 @@
static void memreset_setup(void)
{
//GPIO on amd8111 to enable MEMRST ????
- outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN = 1
- outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 17);
+ outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN = 1
+ outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl) { }
@@ -47,20 +47,20 @@ static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x18
- int ret,i;
- unsigned device=(ctrl->channel0[0])>>8;
- /* the very first write always get COL_STS = 1 and ABRT_STS = 1, so try another time*/
- i = 2;
- do {
- ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- } while ((ret != 0) && (i-->0));
-
- smbus_write_byte(SMBUS_HUB, 0x03, 0);
+ int ret,i;
+ unsigned device=(ctrl->channel0[0])>>8;
+ /* the very first write always get COL_STS = 1 and ABRT_STS = 1, so try another time*/
+ i = 2;
+ do {
+ ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
+ } while ((ret != 0) && (i-->0));
+
+ smbus_write_byte(SMBUS_HUB, 0x03, 0);
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
- return smbus_read_byte(device, address);
+ return smbus_read_byte(device, address);
}
#include <northbridge/amd/amdk8/amdk8.h>
@@ -83,32 +83,32 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
//first node
- RC0|DIMM0, RC0|DIMM2, 0, 0,
- RC0|DIMM1, RC0|DIMM3, 0, 0,
+ RC0|DIMM0, RC0|DIMM2, 0, 0,
+ RC0|DIMM1, RC0|DIMM3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
//second node
- RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
- RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
+ RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
+ RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
#endif
#if CONFIG_MAX_PHYSICAL_CPUS > 2
- // third node
- RC2|DIMM0, RC2|DIMM2, 0, 0,
- RC2|DIMM1, RC2|DIMM3, 0, 0,
- // four node
- RC3|DIMM0, RC3|DIMM2, RC3|DIMM4, RC3|DIMM6,
- RC3|DIMM1, RC3|DIMM3, RC3|DIMM5, RC3|DIMM7,
+ // third node
+ RC2|DIMM0, RC2|DIMM2, 0, 0,
+ RC2|DIMM1, RC2|DIMM3, 0, 0,
+ // four node
+ RC3|DIMM0, RC3|DIMM2, RC3|DIMM4, RC3|DIMM6,
+ RC3|DIMM1, RC3|DIMM3, RC3|DIMM5, RC3|DIMM7,
#endif
};
struct sys_info *sysinfo = &sysinfo_car;
- int needs_reset;
- unsigned bsp_apicid = 0;
+ int needs_reset;
+ unsigned bsp_apicid = 0;
#if CONFIG_SET_FIDVID
struct cpuid_result cpuid1;
#endif
- if (bist == 0)
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
@@ -121,35 +121,35 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
- setup_mb_resource_map();
+ setup_mb_resource_map();
#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
+ dump_pci_device(PCI_DEV(0, 0x18, 0));
dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
- set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+ set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS
- // It is said that we should start core1 after all core0 launched
+ // It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
* (there may be apic id conflicts in that case)
*/
- start_other_cores();
+ start_other_cores();
wait_all_other_cores_started(bsp_apicid);
#endif
/* it will set up chains and store link pair for optimization later */
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if 0
//it your CPU min fid is 1G, you can change HT to 1G and FID to max one time.
- needs_reset = optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ needs_reset = optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
#endif
#if CONFIG_SET_FIDVID
@@ -158,23 +158,23 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
cpuid1 = cpuid(0x80000007);
if ((cpuid1.edx & 0x6) == 0x6) {
- {
+ {
/* Read FIDVID_STATUS */
- msr_t msr;
- msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
+ msr_t msr;
+ msr = rdmsr(0xc0010042);
+ printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
+ }
enable_fid_change();
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
+ init_fidvid_bsp(bsp_apicid);
- // show final fid and vid
- {
- msr_t msr;
- msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
+ // show final fid and vid
+ {
+ msr_t msr;
+ msr = rdmsr(0xc0010042);
+ printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo);
+ }
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
@@ -185,15 +185,15 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
- // fidvid change will issue one LDTSTOP and the HT change will be effective too
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
- }
+ // fidvid change will issue one LDTSTOP and the HT change will be effective too
+ if (needs_reset) {
+ printk(BIOS_INFO, "ht reset -\n");
+ soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
+ }
#endif
allow_all_aps_stop(bsp_apicid);
- //It's the time to set ctrl in sysinfo now;
+ //It's the time to set ctrl in sysinfo now;
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
enable_smbus();
@@ -209,20 +209,20 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
memreset_setup();
//do we need apci timer, tsc...., only debug need it for better output
- /* all ap stopped? */
-// init_timer(); // Need to use TMICT to synchronize FID/VID
+ /* all ap stopped? */
+// init_timer(); // Need to use TMICT to synchronize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
#if 0
- print_pci_devices();
+ print_pci_devices();
#endif
#if 0
-// dump_pci_devices();
- dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98);
+// dump_pci_devices();
+ dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98);
dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98);
#endif
- post_cache_as_ram(); // bsp swtich stack to RAM and copy sysinfo RAM now
+ post_cache_as_ram(); // bsp swtich stack to RAM and copy sysinfo RAM now
}