summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYinghai Lu <yinghai.lu@amd.com>2007-04-12 01:23:12 +0000
committerStefan Reinauer <stepan@openbios.org>2007-04-12 01:23:12 +0000
commit0594222eceb5ba642edf813373dd7c979520fcd3 (patch)
treedeb1da8d3d349efda6e06bb859f3a39198e8c4f3
parentf0cf523a9e9e04fbf924859e3b8cbdb9d3d61931 (diff)
On behalf of AMD:
Drop AMD prototype mainboards that were for internal testing & validation use only. Note: These boards could never be purchased. No reasons to worry. Questions welcome via private mail. Signed-off-by: Yinghai Lu <yinghai.lu@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2609 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/amd/quartet/Config.lb239
-rw-r--r--src/mainboard/amd/quartet/Options.lb207
-rw-r--r--src/mainboard/amd/quartet/auto.c258
-rw-r--r--src/mainboard/amd/quartet/chip.h5
-rw-r--r--src/mainboard/amd/quartet/cmos.layout98
-rw-r--r--src/mainboard/amd/quartet/failover.c68
-rw-r--r--src/mainboard/amd/quartet/fakespd.c62
-rw-r--r--src/mainboard/amd/quartet/irq_tables.c38
-rw-r--r--src/mainboard/amd/quartet/mainboard.c7
-rw-r--r--src/mainboard/amd/quartet/mptable.c232
-rw-r--r--src/mainboard/amd/quartet/reset.c6
-rw-r--r--src/mainboard/amd/quartet/resourcemap.c265
-rw-r--r--src/mainboard/amd/serenade/Config.lb215
-rw-r--r--src/mainboard/amd/serenade/Options.lb206
-rw-r--r--src/mainboard/amd/serenade/auto.c218
-rw-r--r--src/mainboard/amd/serenade/chip.h5
-rw-r--r--src/mainboard/amd/serenade/cmos.layout98
-rw-r--r--src/mainboard/amd/serenade/failover.c68
-rw-r--r--src/mainboard/amd/serenade/irq_tables.c61
-rw-r--r--src/mainboard/amd/serenade/mainboard.c7
-rw-r--r--src/mainboard/amd/serenade/mptable.c175
-rw-r--r--src/mainboard/amd/serenade/reset.c6
-rw-r--r--src/mainboard/amd/serenade/resourcemap.c127
-rw-r--r--src/mainboard/amd/serengeti_leopard/Config.lb426
-rw-r--r--src/mainboard/amd/serengeti_leopard/Options.lb313
-rw-r--r--src/mainboard/amd/serengeti_leopard/acpi_tables.c263
-rw-r--r--src/mainboard/amd/serengeti_leopard/auto.c324
-rw-r--r--src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c322
-rw-r--r--src/mainboard/amd/serengeti_leopard/chip.h6
-rw-r--r--src/mainboard/amd/serengeti_leopard/cmos.layout98
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/amd8111.asl172
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl176
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl360
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/amd8131.asl119
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/amd8151.asl29
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl315
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl212
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl2
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl2
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/pci2.asl68
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl1
-rw-r--r--src/mainboard/amd/serengeti_leopard/dx/superio.asl1
-rw-r--r--src/mainboard/amd/serengeti_leopard/fadt.c149
-rw-r--r--src/mainboard/amd/serengeti_leopard/failover.c90
-rw-r--r--src/mainboard/amd/serengeti_leopard/get_bus_conf.c147
-rw-r--r--src/mainboard/amd/serengeti_leopard/irq_tables.c114
-rw-r--r--src/mainboard/amd/serengeti_leopard/license.txt32
-rw-r--r--src/mainboard/amd/serengeti_leopard/mainboard.c9
-rw-r--r--src/mainboard/amd/serengeti_leopard/mptable.c156
-rw-r--r--src/mainboard/amd/serengeti_leopard/readme_acpi.txt30
-rw-r--r--src/mainboard/amd/serengeti_leopard/reset.c6
-rw-r--r--src/mainboard/amd/serengeti_leopard/resourcemap.c265
-rw-r--r--src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl77
-rw-r--r--src/mainboard/amd/solo/Config.lb221
-rw-r--r--src/mainboard/amd/solo/Options.lb209
-rw-r--r--src/mainboard/amd/solo/acpi_tables.c101
-rw-r--r--src/mainboard/amd/solo/auto.c152
-rw-r--r--src/mainboard/amd/solo/chip.h5
-rw-r--r--src/mainboard/amd/solo/cmos.layout98
-rw-r--r--src/mainboard/amd/solo/failover.c68
-rw-r--r--src/mainboard/amd/solo/irq_tables.c59
-rw-r--r--src/mainboard/amd/solo/mainboard.c7
-rw-r--r--src/mainboard/amd/solo/mptable.c241
-rw-r--r--src/mainboard/amd/solo/reset.c6
-rw-r--r--targets/amd/quartet/Config-abuild.lb28
-rw-r--r--targets/amd/quartet/Config.lb20
-rw-r--r--targets/amd/serenade/Config.lb20
-rw-r--r--targets/amd/serengeti_leopard/Config.lb77
-rw-r--r--targets/amd/serengeti_leopard/VERSION1
-rw-r--r--targets/amd/solo/Config-8MBit.lb17
-rw-r--r--targets/amd/solo/Config.lb22
71 files changed, 0 insertions, 8307 deletions
diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb
deleted file mode 100644
index 9233460965..0000000000
--- a/src/mainboard/amd/quartet/Config.lb
+++ /dev/null
@@ -1,239 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8 # mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- chip southbridge/amd/amd8111
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 on end
- end
- device pci 1.0 on
- chip superio/nsc/pc87360
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.8 off end # ACB
- device pnp 2e.9 off end # FSCM
- device pnp 2e.a off end # WDT
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 on end
- device pci 1.6 on end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end # 8111
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8 # mc1
- device pci 19.0 on end
- device pci 19.0 on
- chip southbridge/amd/amd8131 # amd8131_0
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8131 # amd8131_1
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
-
- chip northbridge/amd/amdk8 # mc2
- device pci 1a.0 on end
- device pci 1a.0 on end
- device pci 1a.0 on end
- device pci 1a.1 on end
- device pci 1a.2 on end
- device pci 1a.3 on end
- end
-
- chip northbridge/amd/amdk8 # mc3
- device pci 1b.0 on end
- device pci 1b.0 on end
- device pci 1b.0 on end
- device pci 1b.1 on end
- device pci 1b.2 on end
- device pci 1b.3 on end
- end
- end # pci_domain 0
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- chip cpu/amd/socket_940
- device apic 2 on end
- end
- chip cpu/amd/socket_940
- device apic 3 on end
- end
- end
-end
-
diff --git a/src/mainboard/amd/quartet/Options.lb b/src/mainboard/amd/quartet/Options.lb
deleted file mode 100644
index 78b3dfbd00..0000000000
--- a/src/mainboard/amd/quartet/Options.lb
+++ /dev/null
@@ -1,207 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROM_PAYLOAD_START
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses LINUXBIOS_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-
-uses CONFIG_USE_INIT
-
-
-###
-### Build options
-###
-
-##
-## ROM_SIZE is the size of boot ROM that this board will use.
-##
-default ROM_SIZE=524288
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default FALLBACK_SIZE=0x40000
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=4
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="QUARTET"
-default MAINBOARD_VENDOR="AMD"
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c
deleted file mode 100644
index 4e5eb596c0..0000000000
--- a/src/mainboard/amd/quartet/auto.c
+++ /dev/null
@@ -1,258 +0,0 @@
-#define ASSEMBLY 1
-//#define MAXIMUM_CONSOLE_LOGLEVEL 9
-//#define DEFAULT_CONSOLE_LOGLEVEL 9
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (0 << 0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (0 << 0), SMBUS_IO_BASE + 0xc0 + 29);
- } else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (1 << 0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (1 << 0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-/*
- * generate_row is specific to board implementation
- *
- */
-
-static unsigned int generate_row(uint8_t node, uint8_t row,
- uint8_t maxnodes)
-{
- /* Routing Table Node i
- *
- * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
- * i: 0, 1, 2, 3, 4, 5, 6, 7
- *
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
-
- uint32_t ret = 0x00010101; /* default row entry */
-/*
- static const unsigned int rows_2p[2][2] = {
- {0x00030101, 0x00010202},
- {0x00010202, 0x00030101}
- };
-*/
-
- static const unsigned int rows_4p[4][4] = {
- {0x00070101, 0x00010202, 0x00030404, 0x00010204},
- {0x00010202, 0x000b0101, 0x00010208, 0x00030808},
- {0x00030808, 0x00010208, 0x000b0101, 0x00010202},
- {0x00010204, 0x00030404, 0x00010202, 0x00070101}
- };
-
- if (!(node >= maxnodes || row >= maxnodes)) {
-/*
- if (maxnodes == 2)
- ret = rows_2p[node][row];
- if (maxnodes == 4)
-*/
- ret = rows_4p[node][row];
- }
-
- return ret;
-}
-
-
-#if ( FAKE_SPDROM != 1 )
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
- unsigned device = (ctrl->channel0[0]) >> 8;
- smbus_write_byte(SMBUS_HUB, 0x01, device);
- smbus_write_byte(SMBUS_HUB, 0x03, 0);
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device & 0xff, address);
-}
-#else
-#include "fakespd.c"
-#endif
-
-// #include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "sdram/generic_sdram.c"
-/* quartet does not want the default */
-#include "resourcemap.c"
-
-#define RC0 ((1<<1)<<8)
-#define RC1 ((1<<2)<<8)
-#define RC2 ((1<<3)<<8)
-#define RC3 ((1<<4)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = {RC0 | DIMM0, RC0 | DIMM2, 0, 0},
- .channel1 = {RC0 | DIMM1, RC0 | DIMM3, 0, 0},
- },
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = {RC1 | DIMM0, RC1 | DIMM2, 0, 0},
- .channel1 = {RC1 | DIMM1, RC1 | DIMM3, 0, 0},
- },
- {
- .node_id = 2,
- .f0 = PCI_DEV(0, 0x1a, 0),
- .f1 = PCI_DEV(0, 0x1a, 1),
- .f2 = PCI_DEV(0, 0x1a, 2),
- .f3 = PCI_DEV(0, 0x1a, 3),
- .channel0 = {RC2 | DIMM0, RC2 | DIMM2, 0, 0},
- .channel1 = {RC2 | DIMM1, RC2 | DIMM3, 0, 0},
- },
- {
- .node_id = 3,
- .f0 = PCI_DEV(0, 0x1b, 0),
- .f1 = PCI_DEV(0, 0x1b, 1),
- .f2 = PCI_DEV(0, 0x1b, 2),
- .f3 = PCI_DEV(0, 0x1b, 3),
- .channel0 = {RC3 | DIMM0, RC3 | DIMM2, 0, 0},
- .channel1 = {RC3 | DIMM1, RC3 | DIMM3, 0, 0},
- }
- };
-
- int needs_reset;
- unsigned nodeid;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_quartet_resource_map();
- needs_reset = setup_coherent_ht_domain();
-#if 0
- needs_reset |= ht_setup_chains(2);
-#else
- needs_reset |= ht_setup_chains_x();
-#endif
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
- memreset_setup();
- sdram_initialize(sizeof(cpu) / sizeof(cpu[0]), cpu);
-
-#if 0
- dump_pci_devices();
-#endif
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-#if 0
- /* Check the first 1M */
- ram_check(0x00000000, 0x000100000);
-#endif
-}
diff --git a/src/mainboard/amd/quartet/chip.h b/src/mainboard/amd/quartet/chip.h
deleted file mode 100644
index 59c2edff48..0000000000
--- a/src/mainboard/amd/quartet/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_amd_quartet_ops;
-
-struct mainboard_amd_quartet_config {
- int nothing;
-};
diff --git a/src/mainboard/amd/quartet/cmos.layout b/src/mainboard/amd/quartet/cmos.layout
deleted file mode 100644
index 5eb88b9a5a..0000000000
--- a/src/mainboard/amd/quartet/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 reserved_memory
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-8 0 DDR400
-8 1 DDR333
-8 2 DDR266
-8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/amd/quartet/failover.c b/src/mainboard/amd/quartet/failover.c
deleted file mode 100644
index 1738e908d9..0000000000
--- a/src/mainboard/amd/quartet/failover.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/amd/quartet/fakespd.c b/src/mainboard/amd/quartet/fakespd.c
deleted file mode 100644
index 0bbdc59dfd..0000000000
--- a/src/mainboard/amd/quartet/fakespd.c
+++ /dev/null
@@ -1,62 +0,0 @@
-
-#define RC0 ((1<<0)<<8)
-#define RC1 ((1<<1)<<8)
-#define RC2 ((1<<2)<<8)
-#define RC3 ((1<<3)<<8)
-
-#define DIMM0 0xa0
-#define DIMM1 0xa2
-#define DIMM2 0xa4
-#define DIMM3 0xa8
-
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* dummy */
-}
-
-
-/*
- * This function is dedicated to Daniele Frijia <realcosmo@spd-online.de>
- */
-
-static int spd_read_byte(unsigned device, unsigned address)
-{
- static const unsigned char infinion_512mb_pc2700[0x80] = {
- 0x80, 0x08, 0x07, 0x0d, 0x0b, 0x01, 0x48, 0x00,
- 0x04, 0x60, 0x70, 0x02, 0x82, 0x04, 0x04, 0x01,
- 0x0e, 0x04, 0x0c, 0x01, 0x02, 0x26, 0xc0, 0x75,
- 0x70, 0x00, 0x00, 0x48, 0x30, 0x48, 0x2a, 0x80,
- 0x75, 0x75, 0x45, 0x45, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x3c, 0x48, 0x30, 0x28, 0x50, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47,
- 0xc1, 0x49, 0x4e, 0x46, 0x49, 0x4e, 0x45, 0x4f,
- 0x53, 0x37, 0x32, 0x44, 0x36, 0x34, 0x33, 0x30,
- 0x30, 0x47, 0x42, 0x52, 0x36, 0x42, 0x20, 0x20,
- 0x20, 0x20, 0x20, 0x02, 0x0a, 0x03, 0x21, 0x0d,
- 0x3d, 0x89, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
- };
-
- if (address >= 0x80)
- return -1;
-
- /* This code is AMD quartet specific.
- * DIMM0 and DIMM1 are defines of the original smbus device
- * numbers on the quartet. We read them here to see which
- * spd rom we should fake.
- * Below construct assumes that the first two dimm sockets
- * of each cpu hold a 512MB Infinion PC2700 CL2.5 ECC registered
- * ddr ram module.
- */
-
- device &= 0xff;
- if (device == DIMM0 || device == DIMM1) {
- return infinion_512mb_pc2700[address];
- }
-
- return -1;
-}
diff --git a/src/mainboard/amd/quartet/irq_tables.c b/src/mainboard/amd/quartet/irq_tables.c
deleted file mode 100644
index 5b9c9fabc4..0000000000
--- a/src/mainboard/amd/quartet/irq_tables.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*9, /* there can be total 9 devices on the bus */
- 1, /* Where the interrupt router lies (bus) */
- (4<<3)|3, /* Where the interrupt router lies (dev) */
- 0x0, /* IRQs devoted exclusively to PCI usage */
- 0x1022, /* Vendor */
- 0x746b, /* Device */
- 0, /* Crap (miniport) */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0xb0, /* u8 checksum , mod 256 checksum must give zero */
- { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- /* PCI Slot 1 */
- {0x03, (0x01<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x01, 0},
- /* PCI Slot 2 */
- {0x03, (0x02<<3)|0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x02, 0},
- /* PCI Slot 3 */
- {0x02, (0x01<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x03, 0},
- /* PCI Slot 4 */
- {0x02, (0x02<<3)|0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x04, 0},
- /* PCI Slot 5 */
- {0x04, (0x05<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x05, 0},
- /* PCI Slot 6 */
- {0x04, (0x04<<3)|0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}}, 0x06, 0},
- /* Onboard NICS */
- {0x02, (0x03<<3)|0, {{0x04, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0},
- {0x02, (0x04<<3)|0, {{0x04, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0},
- /* Let Linux know about bus 1 */
- {0x01, (0x04<<3)|3, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c
deleted file mode 100644
index d3bfb13308..0000000000
--- a/src/mainboard/amd/quartet/mainboard.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <device/device.h>
-#include "chip.h"
-
-struct chip_operations mainboard_amd_quartet_ops = {
- CHIP_NAME("AMD Quartet Mainboard")
-};
-
diff --git a/src/mainboard/amd/quartet/mptable.c b/src/mainboard/amd/quartet/mptable.c
deleted file mode 100644
index 9d3ea13127..0000000000
--- a/src/mainboard/amd/quartet/mptable.c
+++ /dev/null
@@ -1,232 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-void *smp_write_config_table(void *v)
-{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "AMD ";
- static const char productid[12] = "QUARTET ";
- struct mp_config_table *mc;
- unsigned char bus_num;
- unsigned char bus_isa;
- unsigned char bus_8131_1;
- unsigned char bus_8131_2;
- unsigned char bus_8111_1;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
-
- {
- device_t dev;
-
- /* 8111 */
- dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
- if (dev) {
- bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
-
- bus_8111_1 = 4;
- bus_isa = 5;
- }
- /* 8131-1 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
- if (dev) {
- bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- }
- else {
- printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
-
- bus_8131_1 = 2;
- }
- /* 8131-2 */
- dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
- if (dev) {
- bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- }
- else {
- printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
-
- bus_8131_2 = 3;
- }
- }
-
- /* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
-
- /* IOAPIC handling */
- smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
- {
- device_t dev;
- struct resource *res;
- /* 8131 apic 3 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x03, 0x11, res->base);
- }
- }
- /* 8131 apic 4 */
- dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x04, 0x11, res->base);
- }
- }
- }
-
- /* ISA backward compatibility interrupts */
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, 0x02, 0x00);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x01, 0x02, 0x01);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, 0x02, 0x02);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x03, 0x02, 0x03);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x04, 0x02, 0x04);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x05, 0x02, 0x05);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x06, 0x02, 0x06);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x07, 0x02, 0x07);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x08, 0x02, 0x08);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x09, 0x02, 0x09);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0a, 0x02, 0x0a);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0b, 0x02, 0x0b);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0c, 0x02, 0x0c);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0d, 0x02, 0x0d);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0e, 0x02, 0x0e);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0f, 0x02, 0x0f);
-
- /* Standard local interrupt assignments */
- smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, MP_APIC_ALL, 0x00);
- smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, MP_APIC_ALL, 0x01);
-
-
- /* PCI Slot 1 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|3, 0x02, 0x10);
-
- /* PCI Slot 2 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|0, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|1, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|2, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|3, 0x02, 0x11);
-
- /* PCI Slot 3 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|3, 0x02, 0x10);
-
- /* PCI Slot 4 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|0, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|1, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|2, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|3, 0x02, 0x11);
-
- /* PCI Slot 5 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|3, 0x02, 0x10);
-
- /* PCI Slot 6 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|0, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|1, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|2, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|3, 0x02, 0x13);
-
- /* On board nics */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (3<<2)|0, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (4<<2)|0, 0x02, 0x13);
-
- /* There is no extension information... */
-
- /* Compute the checksums */
- mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n",
- mc, smp_next_mpe_entry(mc));
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
-
diff --git a/src/mainboard/amd/quartet/reset.c b/src/mainboard/amd/quartet/reset.c
deleted file mode 100644
index 63958185f6..0000000000
--- a/src/mainboard/amd/quartet/reset.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "../../../southbridge/amd/amd8111/amd8111_reset.c"
-
-void hard_reset(void)
-{
- amd8111_hard_reset(0, 2);
-}
diff --git a/src/mainboard/amd/quartet/resourcemap.c b/src/mainboard/amd/quartet/resourcemap.c
deleted file mode 100644
index f34e6f5327..0000000000
--- a/src/mainboard/amd/quartet/resourcemap.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * QUARTET needs a different default resource map.
- *
- */
-
-
-static void setup_quartet_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x000f0000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x001f0001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x002f0002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x003f0003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00100003,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200003,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00300003,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00ee1f20,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00f10f11,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00fbff11,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00fec020,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000b20,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00fed020,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00ec0003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00ee2003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00f40003,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00fec003,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00fed003,
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00002020,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00005011,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00003003,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000203,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0xff080113,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xffff0040,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0xffff0270,
- };
- int max;
- max = sizeof(register_values)/sizeof(register_values[0]);
- setup_resource_map(register_values, max);
-}
-
diff --git a/src/mainboard/amd/serenade/Config.lb b/src/mainboard/amd/serenade/Config.lb
deleted file mode 100644
index c1f233d7a0..0000000000
--- a/src/mainboard/amd/serenade/Config.lb
+++ /dev/null
@@ -1,215 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8 # mc
- device pci 18.0 on end # LDT 0
- device pci 18.0 on end # LDT1
- device pci 18.0 on # LDT2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAM_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- end
-end
-
diff --git a/src/mainboard/amd/serenade/Options.lb b/src/mainboard/amd/serenade/Options.lb
deleted file mode 100644
index 20e2615d2e..0000000000
--- a/src/mainboard/amd/serenade/Options.lb
+++ /dev/null
@@ -1,206 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROM_PAYLOAD_START
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses LINUXBIOS_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-
-uses CONFIG_USE_INIT
-
-###
-### Build options
-###
-
-##
-## ROM_SIZE is the size of boot ROM that this board will use.
-##
-default ROM_SIZE=524288
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default FALLBACK_SIZE=0x40000
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="SERENADE"
-default MAINBOARD_VENDOR="AMD"
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c
deleted file mode 100644
index 72b064878a..0000000000
--- a/src/mainboard/amd/serenade/auto.c
+++ /dev/null
@@ -1,218 +0,0 @@
-#define ASSEMBLY 1
-#define DEFAULT_CONSOLE_LOGLEVEL 8
-#define MAXIMUM_CONSOLE_LOGLEVEL 8
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO16 of 8111 will control H0_MEMRESET_L
- * GPIO17 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
- } else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
- udelay(90);
- }
-}
-
-static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
-{
- /* Routing Table Node i
- *
- * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
- * i: 0, 1, 2, 3, 4, 5, 6, 7
- *
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
-
- uint32_t ret = 0x00010101; /* default row entry */
-
- /* CPU0 LDT0 <-> LDT0 CPU1 */
- static const unsigned int rows_2p[2][2] = {
- { 0x00030101, 0x00010202 },
- { 0x00010202, 0x00030101 }
- };
-
- if (maxnodes > 2) {
- print_debug("this mainboard is only designed for 2 cpus\r\n");
- maxnodes = 2;
- }
-
- if (!(node >= maxnodes || row >= maxnodes)) {
- ret = rows_2p[node][row];
- }
-
- return ret;
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
- unsigned nodeid;
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
-#if 0
- print_pci_devices();
-#endif
-
- setup_amd_serenade_resource_map();
- needs_reset = setup_coherent_ht_domain();
- /* non-coherent HT is on LDT2 */
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xC0);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-#if 1
- print_pci_devices();
-#endif
-
- enable_smbus();
-
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
-
- memreset_setup();
- sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-
-#if 0
- dump_pci_devices();
-#endif
-
- print_pci_devices();
-
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-
-#if 0
- /* Check the first 1M */
- ram_check(0x00000000, 0x001000000);
-#endif
-
-}
diff --git a/src/mainboard/amd/serenade/chip.h b/src/mainboard/amd/serenade/chip.h
deleted file mode 100644
index 9f244772d0..0000000000
--- a/src/mainboard/amd/serenade/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_amd_serenade_ops;
-
-struct mainboard_amd_serenade_config {
- int nothing;
-};
diff --git a/src/mainboard/amd/serenade/cmos.layout b/src/mainboard/amd/serenade/cmos.layout
deleted file mode 100644
index 5eb88b9a5a..0000000000
--- a/src/mainboard/amd/serenade/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 reserved_memory
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-8 0 DDR400
-8 1 DDR333
-8 2 DDR266
-8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/amd/serenade/failover.c b/src/mainboard/amd/serenade/failover.c
deleted file mode 100644
index 1738e908d9..0000000000
--- a/src/mainboard/amd/serenade/failover.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/amd/serenade/irq_tables.c b/src/mainboard/amd/serenade/irq_tables.c
deleted file mode 100644
index f340a2d31e..0000000000
--- a/src/mainboard/amd/serenade/irq_tables.c
+++ /dev/null
@@ -1,61 +0,0 @@
-#include <arch/pirq_routing.h>
-#include <device/pci.h>
-
-#define IRQ_SLOT_COUNT 12
-#define IRQ_ROUTER_BUS 0
-#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3)
-#define IRQ_ROUTER_VENDOR 0x1022
-#define IRQ_ROUTER_DEVICE 0x746b
-
-#define AVAILABLE_IRQS 0xdef8
-#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
- { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \
- {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0}
-
-/* Each IRQ_SLOT entry consists of:
- * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
- */
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */
- IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */
- IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */
- 0x00, /* IRQs devoted exclusively to PCI usage */
- IRQ_ROUTER_VENDOR, /* Vendor */
- IRQ_ROUTER_DEVICE, /* Device */
- 0x00, /* Crap (miniport) */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x34, /* u8 checksum , mod 256 checksum must give zero */
- { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
- /* Northbridge, Node 0 */
- IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0),
- /* AMD-8131 PCI-X Bridge */
- IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0),
- /* Onboard LSI SCSI Controller */
- IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0),
- /* Onboard Broadcom NICs */
- IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0),
- /* AMD-8131 PCI-X Bridge */
- IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0),
- /* PCI Slot 1-2 */
- IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4),
- IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1),
- /* AMD-8111 PCI Bridge */
- IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0),
- /* USB Controller */
- IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4),
- /* ATI Rage XL VGA */
- IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0),
- /* AMD-8111 LPC Dridge */
- IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0),
- /* Northbridge, Node 1 */
- IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0),
-
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/amd/serenade/mainboard.c b/src/mainboard/amd/serenade/mainboard.c
deleted file mode 100644
index d0c911272d..0000000000
--- a/src/mainboard/amd/serenade/mainboard.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <device/device.h>
-#include "chip.h"
-
-struct chip_operations mainboard_amd_serenade_ops = {
- CHIP_NAME("AMD Serenade Mainboard")
-};
-
diff --git a/src/mainboard/amd/serenade/mptable.c b/src/mainboard/amd/serenade/mptable.c
deleted file mode 100644
index b00eb2b082..0000000000
--- a/src/mainboard/amd/serenade/mptable.c
+++ /dev/null
@@ -1,175 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-void *smp_write_config_table(void *v)
-{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "AMD ";
- static const char productid[12] = "Serenade ";
- struct mp_config_table *mc;
-
- unsigned char bus_num;
- unsigned char bus_isa;
- unsigned char bus_8111_0;
- unsigned char bus_8111_1;
- unsigned char bus_8131_1;
- unsigned char bus_8131_2;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
-
- {
- device_t dev;
-
- /* 8111 */
- dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
- if (dev) {
- bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS);
- bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- } else {
- printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
- bus_8111_1 = 4;
- bus_isa = 5;
- }
-
- /* 8131-1 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
- if (dev) {
- bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- } else {
- printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
- bus_8131_1 = 2;
- }
-
- /* 8131-2 */
- dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
- if (dev) {
- bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
- bus_8131_2 = 3;
- }
- }
-
- /* define bus and isa numbers */
- for (bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
-
- /* Legacy IOAPIC #2 */
- smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
- {
- device_t dev;
- struct resource *res;
- /* 8131-1 apic #3 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x03, 0x11, res->base);
- }
- }
- /* 8131-2 apic #4 */
- dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x04, 0x11, res->base);
- }
- }
- }
-
- /* ISA backward compatibility interrupts */
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x00);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x01, 0x02, 0x01);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x02);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x03, 0x02, 0x03);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x04, 0x02, 0x04);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x05, 0x02, 0x05);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x06, 0x02, 0x06);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x07, 0x02, 0x07);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x08, 0x02, 0x08);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x09, 0x02, 0x09);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0a, 0x02, 0x0a);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0b, 0x02, 0x0b);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0c, 0x02, 0x0c);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0d, 0x02, 0x0d);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0e, 0x02, 0x0e);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0f, 0x02, 0x0f);
-
- /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */
- /* Integrated SMBus 2.0 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13);
- /* Integrated AMD AC97 Audio */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11);
-
- /* Integrated AMD USB */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13);
-
- /* On board ATI Rage XL */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10);
-
- /* On board Broadcom nics */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01);
-
- /* On board LSI SCSI */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02);
-
- /* PCI Slot 1 PCIX */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13);
-
- /* PCI Slot 2 PCIX */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10);
-
- /* Standard local interrupt assignments:
- * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x00);
- smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x01);
-
- /* There is no extension information... */
-
- /* Compute the checksums */
- mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n",
- mc, smp_next_mpe_entry(mc));
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
-
diff --git a/src/mainboard/amd/serenade/reset.c b/src/mainboard/amd/serenade/reset.c
deleted file mode 100644
index 63958185f6..0000000000
--- a/src/mainboard/amd/serenade/reset.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "../../../southbridge/amd/amd8111/amd8111_reset.c"
-
-void hard_reset(void)
-{
- amd8111_hard_reset(0, 2);
-}
diff --git a/src/mainboard/amd/serenade/resourcemap.c b/src/mainboard/amd/serenade/resourcemap.c
deleted file mode 100644
index 2e026d07e7..0000000000
--- a/src/mainboard/amd/serenade/resourcemap.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * AMD Serenade needs a different resource map
- *
- */
-
-static void setup_amd_serenade_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Base and Limit i Registers */
- /* Base = 0x8000, Limit = 0xffff, Read/Write, DstNode = 0, DstLink = LDT2 */
- PCI_ADDR(0, 0x18, 1, 0xbc), 0x00000048, 0x00ffff20,
- PCI_ADDR(0, 0x18, 1, 0xb8), 0x000000f0, 0x00fc0003,
- /* Base = 0x0a00, Limit = 0x0b00, Read/Write, DstNode = 0, DstLink = LDT2 */
- PCI_ADDR(0, 0x18, 1, 0xac), 0x00000048, 0x00000b20,
- PCI_ADDR(0, 0x18, 1, 0xa8), 0x000000f0, 0x00000a03,
- PCI_ADDR(0, 0x18, 1, 0xb4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xb0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xac), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xa8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xa4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xa0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9c), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8c), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
-
- /* PCI I/O Base and Limit i Registers */
- /* Base = 0x0000, Limit = 0x1fff, Read/Write, VAG/ISA enabled,
- DstNode = 0, DstLink = LDT2 */
- PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x01fff020,
- PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers for Non-coherent HT
- * Bus 0x00 - 0xff, DstNode = 0, DstLink = LDT2, Read/Write */
- PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff000203,
- PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0x00000000,
- };
- int max;
- max = sizeof(register_values)/sizeof(register_values[0]);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/amd/serengeti_leopard/Config.lb b/src/mainboard/amd/serengeti_leopard/Config.lb
deleted file mode 100644
index 3820885275..0000000000
--- a/src/mainboard/amd/serengeti_leopard/Config.lb
+++ /dev/null
@@ -1,426 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FAILOVER_IMAGE
- default ROM_SECTION_SIZE = FAILOVER_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
-else
- if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
- else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
- default ROM_SECTION_OFFSET = 0
- end
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-
-if USE_FAILOVER_IMAGE
- default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
-else
- if USE_FALLBACK_IMAGE
- default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
- else
- default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
- end
-end
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if HAVE_MP_TABLE
- object mptable.o
-end
-
-if HAVE_PIRQ_TABLE
- object irq_tables.o
-end
-
-#if HAVE_ACPI_TABLES
-# object acpi_tables.o
-# object fadt.o
-# if SB_HT_CHAIN_ON_BUS0
-# object dsdt_bus0.o
-# else
-# object dsdt.o
-# end
-# object ssdt.o
-# if ACPI_SSDTX_NUM
-# if SB_HT_CHAIN_ON_BUS0
-# object ssdt2_bus0.o
-# else
-# object ssdt2.o
-# end
-# end
-#end
-
-if HAVE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
- action "iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
- action "mv dsdt_lb.hex dsdt.c"
- end
- object ./dsdt.o
-
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-
- if ACPI_SSDTX_NUM
- makerule ssdt2.c
- depends "$(MAINBOARD)/dx/pci2.asl"
- action "iasl -tc $(MAINBOARD)/dx/pci2.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
- action "mv pci2.hex ssdt2.c"
- end
- object ./ssdt2.o
- end
-end
-
-if USE_DCACHE_RAM
-
- if CONFIG_USE_INIT
- # compile cache_as_ram.c to auto.o
- makerule ./cache_as_ram_auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
- end
-
- else
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
- end
-
- end
-else
-
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
-end
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-end
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-if USE_DCACHE_RAM
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-end
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover_failover.lds
- end
- end
-else
- if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
- else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
- end
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if USE_DCACHE_RAM
-
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-else
-
- ##
- ## Setup RAM
- ##
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
-##
-## Include the secondary Configuration files
-##
-if CONFIG_CHIP_NAME
- config chip.h
-end
-
-# sample config for amd/serengeti_cheetah
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8132
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/i2c/i2cmux # pca9556 smbus mux
- device i2c 18 on #0 pca9516 1
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end
- device i2c 18 on #1 pca9516 2
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 53 on end
- end
- end
- end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on # northbridge
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- end # device pci 19.0
-
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
-
-
- end #pci_domain
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# end
-
-end
-
-
diff --git a/src/mainboard/amd/serengeti_leopard/Options.lb b/src/mainboard/amd/serengeti_leopard/Options.lb
deleted file mode 100644
index d18b1250f3..0000000000
--- a/src/mainboard/amd/serengeti_leopard/Options.lb
+++ /dev/null
@@ -1,313 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_ACPI_TABLES
-uses ACPI_SSDTX_NUM
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses USE_FAILOVER_IMAGE
-uses HAVE_FAILOVER_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses FAILOVER_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROM_PAYLOAD_START
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-uses CONFIG_CHIP_NAME
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
-uses HW_MEM_HOLE_SIZE_AUTO_INC
-uses K8_HT_FREQ_1G_SUPPORT
-
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-
-uses SERIAL_CPU_INIT
-
-uses ENABLE_APIC_EXT_ID
-uses APIC_ID_OFFSET
-uses LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_LB_MEM_TOPK
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## ROM_SIZE is the size of boot ROM that this board will use.
-##
-default ROM_SIZE=524288
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-#default FALLBACK_SIZE=131072
-#default FALLBACK_SIZE=0x40000
-
-#FALLBACK: 256K-4K
-default FALLBACK_SIZE=0x3f000
-#FAILOVER: 4K
-default FAILOVER_SIZE=0x01000
-
-default CONFIG_LB_MEM_TOPK=2048
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-default HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-## ACPI tables will be included
-default HAVE_ACPI_TABLES=1
-## extra SSDT num
-default ACPI_SSDTX_NUM=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default SERIAL_CPU_INIT=0
-
-default ENABLE_APIC_EXT_ID=0
-default APIC_ID_OFFSET=0x8
-default LIFT_BSP_APIC_ID=0
-
-#CHIP_NAME ?
-default CONFIG_CHIP_NAME=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset
-default HT_CHAIN_UNITID_BASE=0xa
-
-#real SB Unit ID
-default HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0
-default SB_HT_CHAIN_ON_BUS0=2
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xcc000
-default DCACHE_RAM_SIZE=0x4000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="serengeti_leopard"
-default MAINBOARD_VENDOR="AMD"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/serengeti_leopard/acpi_tables.c b/src/mainboard/amd/serengeti_leopard/acpi_tables.c
deleted file mode 100644
index eb15ec51bb..0000000000
--- a/src/mainboard/amd/serengeti_leopard/acpi_tables.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Island Aruma ACPI support
- * written by Stefan Reinauer <stepan@openbios.org>
- * (C) 2005 Stefan Reinauer
- *
- *
- * Copyright 2005 AMD
- * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/mtrr.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-#define DUMP_ACPI_TABLES 0
-
-#if DUMP_ACPI_TABLES == 1
-static void dump_mem(unsigned start, unsigned end)
-{
-
- unsigned i;
- print_debug("dump_mem:");
- for(i=start;i<end;i++) {
- if((i & 0xf)==0) {
- printk_debug("\n%08x:", i);
- }
- printk_debug(" %02x", (unsigned char)*((unsigned char *)i));
- }
- print_debug("\n");
- }
-#endif
-
-extern unsigned char AmlCode[];
-extern unsigned char AmlCode_ssdt[];
-
-#if ACPI_SSDTX_NUM >= 1
-extern unsigned char AmlCode_ssdt2[];
-//extern unsigned char AmlCode_ssdt3[];
-//extern unsigned char AmlCode_ssdt4[];
-//extern unsigned char AmlCode_ssdt5[];
-//extern unsigned char AmlCode_ssdt6[];
-//extern unsigned char AmlCode_ssdt7[];
-//extern unsigned char AmlCode_ssdt8[];
-#endif
-
-#define IO_APIC_ADDR 0xfec00000UL
-
-extern unsigned char bus_isa;
-extern unsigned char bus_8132_0;
-extern unsigned char bus_8132_1;
-extern unsigned char bus_8132_2;
-extern unsigned char bus_8111_0;
-extern unsigned char bus_8111_1;
-extern unsigned char bus_8151_0;
-extern unsigned char bus_8151_1;
-extern unsigned apicid_8111;
-extern unsigned apicid_8132_1;
-extern unsigned apicid_8132_2;
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- unsigned int gsi_base=0x18;
-
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write 8111 IOAPIC */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, apicid_8111,
- IO_APIC_ADDR, 0);
-
- /* Write all 8131 IOAPICs */
- {
- device_t dev;
- struct resource *res;
- dev = dev_find_slot(bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, apicid_8132_1,
- res->base, gsi_base );
- gsi_base+=7;
-
- }
- }
- dev = dev_find_slot(bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, apicid_8132_2,
- res->base, gsi_base );
- gsi_base+=7;
- }
- }
- }
-
- current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 5 );
- /* 0: mean bus 0--->ISA */
- /* 0: PIC 0 */
- /* 2: APIC 2 */
- /* 5 mean: 0101 --> Edige-triggered, Active high*/
-
-
- /* create all subtables for processors */
- current = acpi_create_madt_lapic_nmis(current, 5, 1);
- /* 1: LINT1 connect to NMI */
-
-
- return current;
-}
-
-extern void get_bus_conf(void);
-
-extern void update_ssdt(void *ssdt);
-
-unsigned long write_acpi_tables(unsigned long start)
-{
- unsigned long current;
- acpi_rsdp_t *rsdp;
- acpi_rsdt_t *rsdt;
- acpi_hpet_t *hpet;
- acpi_madt_t *madt;
- acpi_srat_t *srat;
- acpi_fadt_t *fadt;
- acpi_facs_t *facs;
- acpi_header_t *dsdt;
- acpi_header_t *ssdt;
- acpi_header_t *ssdtx;
-
- unsigned char *AmlCode_ssdtx[HC_POSSIBLE_NUM];
-
- int i;
-
- get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn
-
- /* Align ACPI tables to 16byte */
- start = ( start + 0x0f ) & -0x10;
- current = start;
-
- printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
-
- /* We need at least an RSDP and an RSDT Table */
- rsdp = (acpi_rsdp_t *) current;
- current += sizeof(acpi_rsdp_t);
- rsdt = (acpi_rsdt_t *) current;
- current += sizeof(acpi_rsdt_t);
-
- /* clear all table memory */
- memset((void *)start, 0, current - start);
-
- acpi_write_rsdp(rsdp, rsdt);
- acpi_write_rsdt(rsdt);
-
- /*
- * We explicitly add these tables later on:
- */
- printk_debug("ACPI: * HPET\n");
- hpet = (acpi_hpet_t *) current;
- current += sizeof(acpi_hpet_t);
- acpi_create_hpet(hpet);
- acpi_add_table(rsdt,hpet);
-
- /* If we want to use HPET Timers Linux wants an MADT */
- printk_debug("ACPI: * MADT\n");
- madt = (acpi_madt_t *) current;
- acpi_create_madt(madt);
- current+=madt->header.length;
- acpi_add_table(rsdt,madt);
-
-
- /* SRAT */
- printk_debug("ACPI: * SRAT\n");
- srat = (acpi_srat_t *) current;
- acpi_create_srat(srat);
- current+=srat->header.length;
- acpi_add_table(rsdt,srat);
-
- /* SSDT */
- printk_debug("ACPI: * SSDT\n");
- ssdt = (acpi_header_t *)current;
- current += ((acpi_header_t *)AmlCode_ssdt)->length;
- memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length);
- //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
- update_ssdt((void*)ssdt);
- /* recalculate checksum */
- ssdt->checksum = 0;
- ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
- acpi_add_table(rsdt,ssdt);
-
-#if ACPI_SSDTX_NUM >= 1
- // we need to make ssdt2 match to PCI2 in pci2.asl,... pci1234[1]
- AmlCode_ssdtx[1] = AmlCode_ssdt2;
-// AmlCode_ssdtx[2] = AmlCode_ssdt3;
-// AmlCode_ssdtx[3] = AmlCode_ssdt4;
-// AmlCode_ssdtx[4] = AmlCode_ssdt5;
-// AmlCode_ssdtx[5] = AmlCode_ssdt6;
-// AmlCode_ssdtx[6] = AmlCode_ssdt7;
-// AmlCode_ssdtx[7] = AmlCode_ssdt8;
-
- //same htio, but different possition? We may have to copy, change HCIN, and recalculate the checknum and add_table
-
- for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink
- if((sysconf.pci1234[i] & 1) != 1 ) continue;
- printk_debug("ACPI: * SSDT for PCI%d\n", i+1); //pci0 and pci1 are in dsdt
- ssdtx = (acpi_header_t *)current;
- current += ((acpi_header_t *)AmlCode_ssdtx[i])->length;
- memcpy((void *)ssdtx, (void *)AmlCode_ssdtx[i], ((acpi_header_t *)AmlCode_ssdtx[i])->length);
- acpi_add_table(rsdt,ssdtx);
- }
-#endif
-
-
- /* FACS */
- printk_debug("ACPI: * FACS\n");
- facs = (acpi_facs_t *) current;
- current += sizeof(acpi_facs_t);
- acpi_create_facs(facs);
-
- /* DSDT */
- printk_debug("ACPI: * DSDT\n");
- dsdt = (acpi_header_t *)current;
- current += ((acpi_header_t *)AmlCode)->length;
- memcpy((void *)dsdt,(void *)AmlCode, \
- ((acpi_header_t *)AmlCode)->length);
- printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length);
-
- /* FDAT */
- printk_debug("ACPI: * FADT\n");
- fadt = (acpi_fadt_t *) current;
- current += sizeof(acpi_fadt_t);
-
- acpi_create_fadt(fadt,facs,dsdt);
- acpi_add_table(rsdt,fadt);
-
-#if DUMP_ACPI_TABLES == 1
- printk_debug("rsdp\n");
- dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
-
- printk_debug("rsdt\n");
- dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
-
- printk_debug("madt\n");
- dump_mem(madt, ((void *)madt) + madt->header.length);
-
- printk_debug("srat\n");
- dump_mem(srat, ((void *)srat) + srat->header.length);
-
- printk_debug("ssdt\n");
- dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
-
- printk_debug("fadt\n");
- dump_mem(fadt, ((void *)fadt) + fadt->header.length);
-#endif
-
- printk_info("ACPI: done.\n");
- return current;
-}
-
diff --git a/src/mainboard/amd/serengeti_leopard/auto.c b/src/mainboard/amd/serengeti_leopard/auto.c
deleted file mode 100644
index d2ddf4fdf5..0000000000
--- a/src/mainboard/amd/serengeti_leopard/auto.c
+++ /dev/null
@@ -1,324 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
- int ret,i;
- unsigned device=(ctrl->channel0[0])>>8;
- /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
- i=2;
- do {
- ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- } while ((ret!=0) && (i-->0));
-
- smbus_write_byte(SMBUS_HUB, 0x03, 0);
-}
-#if 0
-static inline void change_i2c_mux(unsigned device)
-{
-#define SMBUS_HUB 0x18
- int ret, i;
- print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n");
- i=2;
- do {
- ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n");
- } while ((ret!=0) && (i-->0));
- ret = smbus_write_byte(SMBUS_HUB, 0x03, 0);
- print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n");
-}
-#endif
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-//#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-
-#if 0
- #define ENABLE_APIC_EXT_ID 1
- #define APIC_ID_OFFSET 0x10
- #define LIFT_BSP_APIC_ID 0
-#else
- #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define RC0 ((1<<0)<<8)
-#define RC1 ((1<<1)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { RC0|DIMM0, 0, 0, 0 },
- .channel1 = { RC0|DIMM1, 0, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { RC1|DIMM0, 0 , 0, 0 },
- .channel1 = { RC1|DIMM1, 0 , 0, 0 },
-
- },
-#endif
-
- };
-
- int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
- if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-
- id = get_node_core_id_x(); // that is initid
- #if ENABLE_APIC_EXT_ID == 1
- if(id.coreid == 0) {
- enable_apic_ext_id(id.nodeid);
- }
- #endif
-#else
- nodeid = get_node_id();
- #if ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(nodeid);
- #endif
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if( id.nodeid != 0 ) //all except cores in node0
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) );
- #endif
-
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
-// start_other_core(id.nodeid);
- }
-
-#else
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if(nodeid != 0)
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
-
- #endif
-
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_serengeti_leopard_resource_map();
- needs_reset = setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
-#endif
-
-#if 0
- // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec
- needs_reset |= ht_setup_chains(2);
-#else
- // automatically set that for you, but you might meet tight space
- needs_reset |= ht_setup_chains_x();
-#endif
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
- memreset_setup();
- sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-
-#if 0
- dump_pci_devices();
-#endif
-
- /* Check all of memory */
-#if 0
- msr_t msr;
- msr = rdmsr(TOP_MEM2);
- print_debug("TOP_MEM2: ");
- print_debug_hex32(msr.hi);
- print_debug_hex32(msr.lo);
- print_debug("\r\n");
-#endif
-
-#if 0
- ram_check(0x00000000, msr.lo+(msr.hi<<32));
-#endif
-
-#if 0
- // Check 16MB of memory @ 0
- ram_check(0x00000000, 0x00100000);
- // Check 16MB of memory @ 2GB
- ram_check(0x80000000, 0x80100000);
-#endif
-
-
-}
diff --git a/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c b/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c
deleted file mode 100644
index 9a0c3aec21..0000000000
--- a/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c
+++ /dev/null
@@ -1,322 +0,0 @@
-#define ASSEMBLY 1
-#define __ROMCC__
-
-#define RAMINIT_SYSINFO 0
-
-#if CONFIG_LOGICAL_CPUS==1
- #define SET_NB_CFG_54 1
-#endif
-
-//use by raminit
-#define QRANK_DIMM_SUPPORT 1
-
-//used by incoherent_ht
-//#define K8_SCAN_PCI_BUS 1
-//#define K8_ALLOCATE_IO_RANGE 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-
-#if USE_FAILOVER_IMAGE==0
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-
-#endif
-
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if USE_FAILOVER_IMAGE==0
-
-#if CONFIG_USE_INIT == 0
-#include "lib/memcpy.c"
- #if CONFIG_USE_PRINTK_IN_CAR == 1
- #include "lib/uart8250.c"
- #include "console/vtxprintf.c"
- #include "arch/i386/lib/printk_init.c"
- #endif
-#endif
-
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
- int ret,i;
- unsigned device=(ctrl->channel0[0])>>8;
- /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
- i=2;
- do {
- ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- } while ((ret!=0) && (i-->0));
-
- smbus_write_byte(SMBUS_HUB, 0x03, 0);
-}
-#if 0
-static inline void change_i2c_mux(unsigned device)
-{
-#define SMBUS_HUB 0x18
- int ret, i;
- print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n");
- i=2;
- do {
- ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n");
- } while ((ret!=0) && (i-->0));
- ret = smbus_write_byte(SMBUS_HUB, 0x03, 0);
- print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n");
-}
-#endif
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define RC0 ((1<<0)<<8)
-#define RC1 ((1<<1)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-
-#include "cpu/amd/car/copy_and_run.c"
-#include "cpu/amd/car/post_cache_as_ram.c"
-
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-#endif
-
-#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
-
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the flash access */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
-#if HAVE_FAILOVER_BOOT==1
- __asm__ volatile ("jmp __fallback_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- )
-#endif
- ;
-}
-#endif
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-#if HAVE_FAILOVER_BOOT==1
- #if USE_FAILOVER_IMAGE==1
- failover_process(bist, cpu_init_detectedx);
- #else
- real_main(bist, cpu_init_detectedx);
- #endif
-#else
- #if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
- #endif
- real_main(bist, cpu_init_detectedx);
-#endif
-}
-
-#if USE_FAILOVER_IMAGE==0
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const uint16_t spd_addr [] = {
- RC0|DIMM0, 0, 0, 0,
- RC0|DIMM1, 0, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- RC1|DIMM0, 0 , 0, 0,
- RC1|DIMM1, 0 , 0, 0,
-#endif
- };
-
- int needs_reset;
- unsigned bsp_apicid = 0;
-
- struct mem_controller ctrl[8];
- unsigned nodes;
-
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx);
- }
-
-// post_code(0x32);
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
-// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
-
- setup_serengeti_leopard_resource_map();
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
- dump_pci_device(PCI_DEV(0, 0x19, 0));
-#endif
-
- needs_reset = setup_coherent_ht_domain();
-
- wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
- * So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
- */
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- needs_reset |= ht_setup_chains_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- allow_all_aps_stop(bsp_apicid);
-
- nodes = get_nodes();
- //It's the time to set ctrl now;
- fill_mem_ctrl(nodes, ctrl, spd_addr);
-
- enable_smbus();
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
-#if 0
- dump_smbus_registers();
-#endif
-
- memreset_setup();
-
-// init_timer(); // Need to use TMICT to synconize FID/VID
-
- sdram_initialize(nodes, ctrl);
-
-#if 0
- print_pci_devices();
-#endif
-
-#if 0
- dump_pci_devices();
-#endif
-
- post_cache_as_ram();
-
-}
-
-#endif
diff --git a/src/mainboard/amd/serengeti_leopard/chip.h b/src/mainboard/amd/serengeti_leopard/chip.h
deleted file mode 100644
index e84ffdf729..0000000000
--- a/src/mainboard/amd/serengeti_leopard/chip.h
+++ /dev/null
@@ -1,6 +0,0 @@
-extern struct chip_operations mainboard_amd_serengeti_leopard_ops;
-
-struct mainboard_amd_serengeti_leopard_config {
-// int fixup_scsi;
-// int fixup_vga;
-};
diff --git a/src/mainboard/amd/serengeti_leopard/cmos.layout b/src/mainboard/amd/serengeti_leopard/cmos.layout
deleted file mode 100644
index c1f3d75316..0000000000
--- a/src/mainboard/amd/serengeti_leopard/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 reserved_memory
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-8 0 200Mhz
-8 1 166Mhz
-8 2 133Mhz
-8 3 100Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl
deleted file mode 100644
index e64bc4a062..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-//AMD8111
- Name (APIC, Package (0x04)
- {
- Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present
- Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11},
- Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12},
- Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13}
- })
-
- Name (PICM, Package (0x04)
- {
- Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00},
- Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00},
- Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00},
- Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00}
- })
-
- Name (DNCG, Ones)
-
- Method (_PRT, 0, NotSerialized)
- {
- If (LEqual (^DNCG, Ones)) {
- Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0)
- // Update the Device Number according to SBDN
- Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0))
- Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0))
- Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0))
- Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0))
-
- Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0))
- Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0))
- Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0))
- Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0))
-
- Store (0x00, ^DNCG)
-
- }
-
- If (LNot (PICF)) {
- Return (PICM)
- }
- Else {
- Return (APIC)
- }
- }
-
- Device (SBC3)
- {
- /* acpi smbus it should be 0x00040003 if 8131 present */
- Method (_ADR, 0, NotSerialized)
- {
- Return (DADD(\_SB.PCI0.SBDN, 0x00010003))
- }
- OperationRegion (PIRQ, PCI_Config, 0x56, 0x02)
- Field (PIRQ, ByteAcc, Lock, Preserve)
- {
- PIBA, 8,
- PIDC, 8
- }
-/*
- OperationRegion (TS3_, PCI_Config, 0xC4, 0x02)
- Field (TS3_, DWordAcc, NoLock, Preserve)
- {
- PTS3, 16
- }
-*/
- }
-
- Device (HPET)
- {
- Name (HPT, 0x00)
- Name (_HID, EisaId ("PNP0103"))
- Name (_UID, 0x00)
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0F)
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400)
- })
- Return (BUF0)
- }
- }
-
- Include ("amd8111_pic.asl")
-
- Include ("amd8111_isa.asl")
-
- Device (TP2P)
- {
- /* 8111 P2P and it should 0x00030000 when 8131 present*/
- Method (_ADR, 0, NotSerialized)
- {
- Return (DADD(\_SB.PCI0.SBDN, 0x00000000))
- }
-
- Method (_PRW, 0, NotSerialized)
- {
- If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) }
- Else { Return (Package (0x02) { 0x08, 0x01 }) }
- }
-
- Device (USB0)
- {
- Name (_ADR, 0x00000000)
- Method (_PRW, 0, NotSerialized)
- {
- If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
- Else { Return (Package (0x02) { 0x0F, 0x01 }) }
- }
- }
-
- Device (USB1)
- {
- Name (_ADR, 0x00000001)
- Method (_PRW, 0, NotSerialized)
- {
- If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
- Else { Return (Package (0x02) { 0x0F, 0x01 }) }
- }
- }
-
- Name (APIC, Package (0x0C)
- {
- Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB
- Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
- Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
- Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 },
-
- Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4
- Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 },
- Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 },
- Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 },
-
- Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3
- Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 },
- Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 },
- Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 }
- })
-
- Name (PICM, Package (0x0C)
- {
- Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB
- Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
-
- Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 4
- Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
-
- Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 3
- Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }
- })
-
- Method (_PRT, 0, NotSerialized)
- {
- If (LNot (PICF)) { Return (PICM) }
- Else { Return (APIC) }
- }
- }
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl
deleted file mode 100644
index b68230607e..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-//AMD8111 isa
-
- Device (ISA)
- {
- /* lpc 0x00040000 */
- Method (_ADR, 0, NotSerialized)
- {
- Return (DADD(\_SB.PCI0.SBDN, 0x00010000))
- }
-
- OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers
- Field (PIRY, ByteAcc, NoLock, Preserve)
- {
- Z000, 2, // Parallel Port Range
- , 1,
- ECP, 1, // ECP Enable
- FDC1, 1, // Floppy Drive Controller 1
- FDC2, 1, // Floppy Drive Controller 2
- Offset (0x01),
- Z001, 3, // Serial Port A Range
- SAEN, 1, // Serial Post A Enabled
- Z002, 3, // Serial Port B Range
- SBEN, 1 // Serial Post B Enabled
- }
-
- Device (PIC)
- {
- Name (_HID, EisaId ("PNP0000"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x0020, 0x0020, 0x01, 0x02)
- IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02)
- IRQ (Edge, ActiveHigh, Exclusive) {2}
- })
- }
-
- Device (DMA1)
- {
- Name (_HID, EisaId ("PNP0200"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x0000, 0x0000, 0x01, 0x10)
- IO (Decode16, 0x0080, 0x0080, 0x01, 0x10)
- IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20)
- DMA (Compatibility, NotBusMaster, Transfer16) {4}
- })
- }
-
- Device (TMR)
- {
- Name (_HID, EisaId ("PNP0100"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x0040, 0x0040, 0x01, 0x04)
- IRQ (Edge, ActiveHigh, Exclusive) {0}
- })
- }
-
- Device (RTC)
- {
- Name (_HID, EisaId ("PNP0B00"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x0070, 0x0070, 0x01, 0x06)
- IRQ (Edge, ActiveHigh, Exclusive) {8}
- })
- }
-
- Device (SPKR)
- {
- Name (_HID, EisaId ("PNP0800"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x0061, 0x0061, 0x01, 0x01)
- })
- }
-
- Device (COPR)
- {
- Name (_HID, EisaId ("PNP0C04"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10)
- IRQ (Edge, ActiveHigh, Exclusive) {13}
- })
- }
-
- Device (SYSR)
- {
- Name (_HID, EisaId ("PNP0C02"))
- Name (_UID, 0x00)
- Name (SYR1, ResourceTemplate ()
- {
- IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM
- IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM
- IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80)
- IO (Decode16, 0x0010, 0x0010, 0x01, 0x10)
- IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E)
- IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C)
- IO (Decode16, 0x0062, 0x0062, 0x01, 0x02)
- IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B)
- IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A)
- IO (Decode16, 0x0090, 0x0090, 0x01, 0x10)
- IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E)
- IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10)
- IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
- IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
- })
- Method (_CRS, 0, NotSerialized)
- {
- Return (SYR1)
- }
- }
-
- Device (MEM)
- {
- Name (_HID, EisaId ("PNP0C02"))
- Name (_UID, 0x01)
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF
- Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404
- Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC
- Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM
- Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC
- Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS
- })
- // Read the Video Memory length
- CreateDWordField (BUF0, 0x14, CLEN)
- CreateDWordField (BUF0, 0x10, CBAS)
-
- ShiftLeft (VGA1, 0x09, Local0)
- Store (Local0, CLEN)
-
- Return (BUF0)
- }
- }
-
- Device (PS2M)
- {
- Name (_HID, EisaId ("PNP0F13"))
- Name (_CRS, ResourceTemplate ()
- {
- IRQNoFlags () {12}
- })
- Method (_STA, 0, NotSerialized)
- {
- And (FLG0, 0x04, Local0)
- If (LEqual (Local0, 0x04)) { Return (0x0F) }
- Else { Return (0x00) }
- }
- }
-
- Device (PS2K)
- {
- Name (_HID, EisaId ("PNP0303"))
- Name (_CRS, ResourceTemplate ()
- {
- IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
- IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
- IRQNoFlags () {1}
- })
- }
- Include ("superio.asl")
-
- }
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl
deleted file mode 100644
index 228f3f84f1..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-//AMD8111 pic LNKA B C D
-
- Device (LNKA)
- {
- Name (_HID, EisaId ("PNP0C0F"))
- Name (_UID, 0x01)
- Method (_STA, 0, NotSerialized)
- {
- And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local0)
- If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled
- Else { Return (0x0B) } //Enabled
- }
-
- Method (_PRS, 0, NotSerialized)
- {
- Name (BUFA, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {3,5,10,11}
- })
- Return (BUFA)
- }
-
- Method (_DIS, 0, NotSerialized)
- {
- Store (0x01, Local3)
- And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1)
- Store (Local1, Local2)
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local1)
- }
-
- ShiftLeft (Local3, Local1, Local3)
- Not (Local3, Local3)
- And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA)
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUFA, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {}
- })
- CreateByteField (BUFA, 0x01, IRA1)
- CreateByteField (BUFA, 0x02, IRA2)
- Store (0x00, Local3)
- Store (0x00, Local4)
- And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1)
- If (LNot (LEqual (Local1, 0x00)))
- { // Routing enable
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local2)
- ShiftLeft (One, Local2, Local4)
- }
- Else
- {
- If (LGreater (Local1, 0x00))
- {
- ShiftLeft (One, Local1, Local3)
- }
- }
-
- Store (Local3, IRA1)
- Store (Local4, IRA2)
- }
-
- Return (BUFA)
- }
-
- Method (_SRS, 1, NotSerialized)
- {
- CreateByteField (Arg0, 0x01, IRA1)
- CreateByteField (Arg0, 0x02, IRA2)
- ShiftLeft (IRA2, 0x08, Local0)
- Or (Local0, IRA1, Local0)
- Store (0x00, Local1)
- ShiftRight (Local0, 0x01, Local0)
- While (LGreater (Local0, 0x00))
- {
- Increment (Local1)
- ShiftRight (Local0, 0x01, Local0)
- }
-
- And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA)
- Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA)
- }
- }
-
- Device (LNKB)
- {
- Name (_HID, EisaId ("PNP0C0F"))
- Name (_UID, 0x02)
- Method (_STA, 0, NotSerialized)
- {
- And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local0)
- If (LEqual (Local0, 0x00)) { Return (0x09) }
- Else { Return (0x0B) }
- }
-
- Method (_PRS, 0, NotSerialized)
- {
- Name (BUFB, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {3,5,10,11}
- })
- Return (BUFB)
- }
-
- Method (_DIS, 0, NotSerialized)
- {
- Store (0x01, Local3)
- And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1)
- ShiftRight (Local1, 0x04, Local1)
- Store (Local1, Local2)
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local1)
- }
-
- ShiftLeft (Local3, Local1, Local3)
- Not (Local3, Local3)
- And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA)
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUFB, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {}
- })
- CreateByteField (BUFB, 0x01, IRB1)
- CreateByteField (BUFB, 0x02, IRB2)
- Store (0x00, Local3)
- Store (0x00, Local4)
- And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1)
- ShiftRight (Local1, 0x04, Local1)
- If (LNot (LEqual (Local1, 0x00)))
- {
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local2)
- ShiftLeft (One, Local2, Local4)
- }
- Else
- {
- If (LGreater (Local1, 0x00))
- {
- ShiftLeft (One, Local1, Local3)
- }
- }
-
- Store (Local3, IRB1)
- Store (Local4, IRB2)
- }
-
- Return (BUFB)
- }
-
- Method (_SRS, 1, NotSerialized)
- {
- CreateByteField (Arg0, 0x01, IRB1)
- CreateByteField (Arg0, 0x02, IRB2)
- ShiftLeft (IRB2, 0x08, Local0)
- Or (Local0, IRB1, Local0)
- Store (0x00, Local1)
- ShiftRight (Local0, 0x01, Local0)
- While (LGreater (Local0, 0x00))
- {
- Increment (Local1)
- ShiftRight (Local0, 0x01, Local0)
- }
-
- And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA)
- ShiftLeft (Local1, 0x04, Local1)
- Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA)
- }
- }
-
- Device (LNKC)
- {
- Name (_HID, EisaId ("PNP0C0F"))
- Name (_UID, 0x03)
- Method (_STA, 0, NotSerialized)
- {
- And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local0)
- If (LEqual (Local0, 0x00)) { Return (0x09) }
- Else { Return (0x0B) }
- }
-
- Method (_PRS, 0, NotSerialized)
- {
- Name (BUFA, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {3,5,10,11}
- })
- Return (BUFA)
- }
-
- Method (_DIS, 0, NotSerialized)
- {
- Store (0x01, Local3)
- And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1)
- Store (Local1, Local2)
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local1)
- }
-
- ShiftLeft (Local3, Local1, Local3)
- Not (Local3, Local3)
- And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC)
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUFA, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {}
- })
- CreateByteField (BUFA, 0x01, IRA1)
- CreateByteField (BUFA, 0x02, IRA2)
- Store (0x00, Local3)
- Store (0x00, Local4)
- And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1)
- If (LNot (LEqual (Local1, 0x00)))
- {
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local2)
- ShiftLeft (One, Local2, Local4)
- }
- Else
- {
- If (LGreater (Local1, 0x00))
- {
- ShiftLeft (One, Local1, Local3)
- }
- }
-
- Store (Local3, IRA1)
- Store (Local4, IRA2)
- }
-
- Return (BUFA)
- }
-
- Method (_SRS, 1, NotSerialized)
- {
- CreateByteField (Arg0, 0x01, IRA1)
- CreateByteField (Arg0, 0x02, IRA2)
- ShiftLeft (IRA2, 0x08, Local0)
- Or (Local0, IRA1, Local0)
- Store (0x00, Local1)
- ShiftRight (Local0, 0x01, Local0)
- While (LGreater (Local0, 0x00))
- {
- Increment (Local1)
- ShiftRight (Local0, 0x01, Local0)
- }
-
- And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC)
- Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC)
- }
- }
-
- Device (LNKD)
- {
- Name (_HID, EisaId ("PNP0C0F"))
- Name (_UID, 0x04)
- Method (_STA, 0, NotSerialized)
- {
- And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local0)
- If (LEqual (Local0, 0x00)) { Return (0x09) }
- Else { Return (0x0B) }
- }
-
- Method (_PRS, 0, NotSerialized)
- {
- Name (BUFB, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {3,5,10,11}
- })
- Return (BUFB)
- }
-
- Method (_DIS, 0, NotSerialized)
- {
- Store (0x01, Local3)
- And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1)
- ShiftRight (Local1, 0x04, Local1)
- Store (Local1, Local2)
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local1)
- }
-
- ShiftLeft (Local3, Local1, Local3)
- Not (Local3, Local3)
- And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC)
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUFB, ResourceTemplate ()
- {
- IRQ (Level, ActiveLow, Shared) {}
- })
- CreateByteField (BUFB, 0x01, IRB1)
- CreateByteField (BUFB, 0x02, IRB2)
- Store (0x00, Local3)
- Store (0x00, Local4)
- And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1)
- ShiftRight (Local1, 0x04, Local1)
- If (LNot (LEqual (Local1, 0x00)))
- {
- If (LGreater (Local1, 0x07))
- {
- Subtract (Local1, 0x08, Local2)
- ShiftLeft (One, Local2, Local4)
- }
- Else
- {
- If (LGreater (Local1, 0x00))
- {
- ShiftLeft (One, Local1, Local3)
- }
- }
-
- Store (Local3, IRB1)
- Store (Local4, IRB2)
- }
-
- Return (BUFB)
- }
-
- Method (_SRS, 1, NotSerialized)
- {
- CreateByteField (Arg0, 0x01, IRB1)
- CreateByteField (Arg0, 0x02, IRB2)
- ShiftLeft (IRB2, 0x08, Local0)
- Or (Local0, IRB1, Local0)
- Store (0x00, Local1)
- ShiftRight (Local0, 0x01, Local0)
- While (LGreater (Local0, 0x00))
- {
- Increment (Local1)
- ShiftRight (Local0, 0x01, Local0)
- }
-
- And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC)
- ShiftLeft (Local1, 0x04, Local1)
- Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC)
- }
- }
-
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl
deleted file mode 100644
index e209665e48..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-
- Device (PG0A)
- {
- /* 8132 pcix bridge*/
- Method (_ADR, 0, NotSerialized)
- {
- Return (DADD(GHCD(HCIN, 0), 0x00000000))
- }
-
- Method (_PRW, 0, NotSerialized)
- {
- If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
- Else { Return (Package (0x02) { 0x29, 0x01 }) }
- }
-
- Name (APIC, Package (0x14)
- {
- // Slot A - PIRQ BCDA
- Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2
- Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A },
- Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B },
- Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 },
-
- //Cypress Slot A - PIRQ BCDA
- Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //?
- Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A },
- Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B },
- Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 },
-
- //Cypress Slot B - PIRQ CDAB
- Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //?
- Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B },
- Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 },
- Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 },
-
- //Cypress Slot C - PIRQ DABC
- Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //?
- Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 },
- Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 },
- Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A },
-
- //Cypress Slot D - PIRQ ABCD
- Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //?
- Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 },
- Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A },
- Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B }
- })
- Name (PICM, Package (0x14)
- {
- Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 2
- Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
-
- Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
-
- Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
-
- Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
-
- Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
- })
- Method (_PRT, 0, NotSerialized)
- {
- If (LNot (PICF)) { Return (PICM) }
- Else { Return (APIC) }
- }
- }
-
- Device (PG0B)
- {
- /* 8132 pcix bridge 2 */
- Method (_ADR, 0, NotSerialized)
- {
- Return (DADD(GHCD(HCIN, 0), 0x00010000))
- }
-
- Method (_PRW, 0, NotSerialized)
- {
- If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
- Else { Return (Package (0x02) { 0x22, 0x01 }) }
- }
-
- Name (APIC, Package (0x04)
- {
- // Slot A - PIRQ ABCD
- Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1
- Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 },
- Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 },
- Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 }
- })
- Name (PICM, Package (0x04)
- {
- Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1
- Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
- })
- Method (_PRT, 0, NotSerialized)
- {
- If (LNot (PICF)) { Return (PICM) }
- Else { Return (APIC) }
- }
- }
diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl
deleted file mode 100644
index 001d45b0fe..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl
+++ /dev/null
@@ -1,29 +0,0 @@
-// AMD8151
- Device (AGPB)
- {
- Method (_ADR, 0, NotSerialized)
- {
- Return (DADD(GHCD(HCIN, 0), 0x00010000))
- }
-
- Name (APIC, Package (0x04)
- {
- Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 },
- Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
- Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
- Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }
- })
- Name (PICM, Package (0x04)
- {
- Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
- })
- Method (_PRT, 0, NotSerialized)
- {
- If (LNot (PICF)) { Return (PICM) }
- Else { Return (APIC) }
- }
- }
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl b/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl
deleted file mode 100644
index e9155476c5..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-
-//AMD k8 util for BUSB and res range
-
- Scope (\_SB)
- {
-
- Name (OSTB, Ones)
- Method (OSTP, 0, NotSerialized)
- {
- If (LEqual (^OSTB, Ones))
- {
- Store (0x00, ^OSTB)
- }
-
- Return (^OSTB)
- }
-
- Method (SEQL, 2, Serialized)
- {
- Store (SizeOf (Arg0), Local0)
- Store (SizeOf (Arg1), Local1)
- If (LNot (LEqual (Local0, Local1))) { Return (Zero) }
-
- Name (BUF0, Buffer (Local0) {})
- Store (Arg0, BUF0)
- Name (BUF1, Buffer (Local0) {})
- Store (Arg1, BUF1)
- Store (Zero, Local2)
- While (LLess (Local2, Local0))
- {
- Store (DerefOf (Index (BUF0, Local2)), Local3)
- Store (DerefOf (Index (BUF1, Local2)), Local4)
- If (LNot (LEqual (Local3, Local4))) { Return (Zero) }
-
- Increment (Local2)
- }
-
- Return (One)
- }
-
-
- Method (DADD, 2, NotSerialized)
- {
- Store( Arg1, Local0)
- Store( Arg0, Local1)
- Add( ShiftLeft(Local1,16), Local0, Local0)
- Return (Local0)
- }
-
-
- Method (GHCE, 1, NotSerialized) // check if the HC enabled
- {
- Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
- if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) }
- Else { Return (0x00) }
- }
-
- Method (GHCN, 1, NotSerialized) // get the node num for the HC
- {
- Store (0x00, Local0)
- Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
- Store (ShiftRight( And (Local1, 0xf0), 0x04), Local0)
- Return (Local0)
- }
-
- Method (GHCL, 1, NotSerialized) // get the link num on node for the HC
- {
- Store (0x00, Local0)
- Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
- Store (ShiftRight( And (Local1, 0xf00), 0x08), Local0)
- Return (Local0)
- }
-
- Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC
- {
- Store (0x00, Local0)
- Store (DerefOf (Index (\_SB.PCI0.HCDN, Arg0)), Local1)
- Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0
- Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0
- Store (And (ShiftRight( Local1, Local2), 0xff), Local0)
- Return (Local0)
- }
-
- Method (GBUS, 2, NotSerialized)
- {
- Store (0x00, Local0)
- While (LLess (Local0, 0x04))
- {
- Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1)
- If (LEqual (And (Local1, 0x03), 0x03))
- {
- If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04)))
- {
- If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08))))
- {
- Return (ShiftRight (And (Local1, 0x00FF0000), 0x10))
- }
- }
- }
-
- Increment (Local0)
- }
-
- Return (0x00)
- }
-
- Method (GWBN, 2, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
- 0x0000, // Address Space Granularity
- 0x0000, // Address Range Minimum
- 0x0000, // Address Range Maximum
- 0x0000, // Address Translation Offset
- 0x0000,,,)
- })
- CreateWordField (BUF0, 0x08, BMIN)
- CreateWordField (BUF0, 0x0A, BMAX)
- CreateWordField (BUF0, 0x0E, BLEN)
- Store (0x00, Local0)
- While (LLess (Local0, 0x04))
- {
- Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1)
- If (LEqual (And (Local1, 0x03), 0x03))
- {
- If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04)))
- {
- If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08))))
- {
- Store (ShiftRight (And (Local1, 0x00FF0000), 0x10), BMIN)
- Store (ShiftRight (Local1, 0x18), BMAX)
- Subtract (BMAX, BMIN, BLEN)
- Increment (BLEN)
- Return (RTAG (BUF0))
- }
- }
- }
-
- Increment (Local0)
- }
-
- Return (RTAG (BUF0))
- }
-
- Method (GMEM, 2, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
- 0x00000000, // Address Space Granularity
- 0x00000000, // Address Range Minimum
- 0x00000000, // Address Range Maximum
- 0x00000000, // Address Translation Offset
- 0x00000000,,,
- , AddressRangeMemory, TypeStatic)
- })
- CreateDWordField (BUF0, 0x0A, MMIN)
- CreateDWordField (BUF0, 0x0E, MMAX)
- CreateDWordField (BUF0, 0x16, MLEN)
- Store (0x00, Local0)
- Store (0x00, Local4)
- Store (0x00, Local3)
- While (LLess (Local0, 0x10))
- {
- Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1)
- Increment (Local0)
- Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2)
- If (LEqual (And (Local1, 0x03), 0x03))
- {
- If (LEqual (Arg0, And (Local2, 0x07)))
- {
- If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04))))
- {
- Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN)
- Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX)
- Or (MMAX, 0xFFFF, MMAX)
- Subtract (MMAX, MMIN, MLEN)
-
- If (Local4)
- {
- Concatenate (RTAG (BUF0), Local3, Local5)
- Store (Local5, Local3)
- }
- Else
- {
- If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK)))
- {
- Store (\_SB.PCI0.TOM1, MMIN)
- Subtract (MMAX, MMIN, MLEN)
- Increment (MLEN)
- }
-
- Store (RTAG (BUF0), Local3)
- }
-
- Increment (Local4)
- }
- }
- }
-
- Increment (Local0)
- }
-
- If (LNot (Local4))
- {
- Store (BUF0, Local3)
- }
-
- Return (Local3)
- }
-
- Method (GIOR, 2, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x00000000, // Address Space Granularity
- 0x00000000, // Address Range Minimum
- 0x00000000, // Address Range Maximum
- 0x00000000, // Address Translation Offset
- 0x00000000,,,
- , TypeStatic)
- })
- CreateDWordField (BUF0, 0x0A, PMIN)
- CreateDWordField (BUF0, 0x0E, PMAX)
- CreateDWordField (BUF0, 0x16, PLEN)
- Store (0x00, Local0)
- Store (0x00, Local4)
- Store (0x00, Local3)
- While (LLess (Local0, 0x08))
- {
- Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local1)
- Increment (Local0)
- Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local2)
- If (LEqual (And (Local1, 0x03), 0x03))
- {
- If (LEqual (Arg0, And (Local2, 0x07)))
- {
- If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04))))
- {
- Store (And (Local1, 0x01FFF000), PMIN)
- Store (And (Local2, 0x01FFF000), PMAX)
- Or (PMAX, 0x0FFF, PMAX)
- Subtract (PMAX, PMIN, PLEN)
- Increment (PLEN)
-
- If (Local4)
- {
- Concatenate (RTAG (BUF0), Local3, Local5)
- Store (Local5, Local3)
- }
- Else
- {
- If (LGreater (PMAX, PMIN))
- {
- If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK)))
- {
- Store (0x0D00, PMIN)
- Subtract (PMAX, PMIN, PLEN)
- Increment (PLEN)
- }
-
- Store (RTAG (BUF0), Local3)
- Increment (Local4)
- }
-
- If (And (Local1, 0x10))
- {
- Store (0x03B0, PMIN)
- Store (0x03DF, PMAX)
- Store (0x30, PLEN)
- If (Local4)
- {
- Concatenate (RTAG (BUF0), Local3, Local5)
- Store (Local5, Local3)
- }
- Else
- {
- Store (RTAG (BUF0), Local3)
- }
- }
- }
-
- Increment (Local4)
- }
- }
- }
-
- Increment (Local0)
- }
-
- If (LNot (Local4))
- {
- Store (RTAG (BUF0), Local3)
- }
-
- Return (Local3)
- }
-
- Method (RTAG, 1, NotSerialized)
- {
- Store (Arg0, Local0)
- Store (SizeOf (Local0), Local1)
- Subtract (Local1, 0x02, Local1)
- Multiply (Local1, 0x08, Local1)
- CreateField (Local0, 0x00, Local1, RETB)
- Store (RETB, Local2)
- Return (Local2)
- }
- }
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl b/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl
deleted file mode 100644
index 04ec830f08..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440)
-{
- Scope (_PR)
- {
- Processor (CPU0, 0x00, 0x0000C010, 0x06) {}
- Processor (CPU1, 0x01, 0x00000000, 0x00) {}
- Processor (CPU2, 0x02, 0x00000000, 0x00) {}
- Processor (CPU3, 0x03, 0x00000000, 0x00) {}
-
- }
-
- Method (FWSO, 0, NotSerialized) { }
-
- Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 })
- Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 })
- Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 })
- Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 })
-
- Scope (_SB)
- {
- Device (PCI0)
- {
- /* BUS0 root bus */
-
- External (BUSN)
- External (MMIO)
- External (PCIO)
- External (SBLK)
- External (TOM1)
- External (HCLK)
- External (SBDN)
- External (HCDN)
- External (CBST)
-
-
- Name (_HID, EisaId ("PNP0A03"))
- Name (_ADR, 0x00180000)
- Name (_UID, 0x01)
-
- Name (HCIN, 0x00) // HC1
-
- Method (_BBN, 0, NotSerialized)
- {
- Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh
- IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h
- IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h
-
- WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, // Address Space Granularity
- 0x8100, // Address Range Minimum
- 0xFFFF, // Address Range Maximum
- 0x0000, // Address Translation Offset
- 0x7F00,,,
- , TypeStatic) //8100h-FFFFh
-
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00000000, // Address Space Granularity
- 0x000C0000, // Address Range Minimum
- 0x00000000, // Address Range Maximum
- 0x00000000, // Address Translation Offset
- 0x00000000,,,
- , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh
-
- Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF
-
- WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, // Address Space Granularity
- 0x0000, // Address Range Minimum
- 0x03AF, // Address Range Maximum
- 0x0000, // Address Translation Offset
- 0x03B0,,,
- , TypeStatic) //0-CF7h
-
- WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, // Address Space Granularity
- 0x03E0, // Address Range Minimum
- 0x0CF7, // Address Range Maximum
- 0x0000, // Address Translation Offset
- 0x0918,,,
- , TypeStatic) //0-CF7h
- })
- \_SB.OSTP ()
- CreateDWordField (BUF0, 0x3E, VLEN)
- CreateDWordField (BUF0, 0x36, VMAX)
- CreateDWordField (BUF0, 0x32, VMIN)
- ShiftLeft (VGA1, 0x09, Local0)
- Add (VMIN, Local0, VMAX)
- Decrement (VMAX)
- Store (Local0, VLEN)
- Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
- Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
- Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
- Return (Local3)
- }
-
- Include ("pci0_hc.asl")
-
- }
- Device (PCI1)
- {
- Name (_HID, "PNP0A03")
- Name (_ADR, 0x00000000)
- Name (_UID, 0x02)
- Method (_STA, 0, NotSerialized)
- {
- Return (\_SB.PCI0.CBST)
- }
- Name (_BBN, 0x00)
- }
-
-
- }
-
- Scope (_GPE)
- {
- Method (_L08, 0, NotSerialized)
- {
- Notify (\_SB.PCI0, 0x02) //PME# Wakeup
- }
-
- Method (_L0F, 0, NotSerialized)
- {
- Notify (\_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup
- }
-
- Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B
- {
- Notify (\_SB.PCI0.PG0B, 0x02)
- }
-
- Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A
- {
- Notify (\_SB.PCI0.PG0A, 0x02)
- }
- }
-
- Method (_PTS, 1, NotSerialized)
- {
- Or (Arg0, 0xF0, Local0)
- Store (Local0, DBG1)
- }
-/*
- Method (_WAK, 1, NotSerialized)
- {
- Or (Arg0, 0xE0, Local0)
- Store (Local0, DBG1)
- }
-*/
- Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode
- Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method
- {
- Store (Arg0, PICF)
- }
-
- OperationRegion (DEBG, SystemIO, 0x80, 0x01)
- Field (DEBG, ByteAcc, Lock, Preserve)
- {
- DBG1, 8
- }
-
- OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04)
- Field (EXTM, WordAcc, Lock, Preserve)
- {
- AMEM, 32
- }
-
- OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01)
- Field (VGAM, ByteAcc, Lock, Preserve)
- {
- VGA1, 8
- }
-
- OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
- Field (GRAM, ByteAcc, Lock, Preserve)
- {
- Offset (0x10),
- FLG0, 8
- }
-
- OperationRegion (GSTS, SystemIO, 0xC028, 0x02)
- Field (GSTS, ByteAcc, NoLock, Preserve)
- {
- , 4,
- IRQR, 1
- }
-
- OperationRegion (Z007, SystemIO, 0x21, 0x01)
- Field (Z007, ByteAcc, NoLock, Preserve)
- {
- Z008, 8
- }
-
- OperationRegion (Z009, SystemIO, 0xA1, 0x01)
- Field (Z009, ByteAcc, NoLock, Preserve)
- {
- Z00A, 8
- }
-
- Include ("amdk8_util.asl")
-
-}
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl
deleted file mode 100644
index b1e9562f6b..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl
+++ /dev/null
@@ -1,2 +0,0 @@
- Include ("amd8111.asl") //real SB at first
- Include ("amd8131.asl")
diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl
deleted file mode 100644
index b1e9562f6b..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl
+++ /dev/null
@@ -1,2 +0,0 @@
- Include ("amd8111.asl") //real SB at first
- Include ("amd8131.asl")
diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci2.asl b/src/mainboard/amd/serengeti_leopard/dx/pci2.asl
deleted file mode 100644
index a62ba98333..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/pci2.asl
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440)
-{
- Scope (_SB)
- {
- External (DADD, MethodObj)
- External (GHCE, MethodObj)
- External (GHCN, MethodObj)
- External (GHCL, MethodObj)
- External (GHCD, MethodObj)
- External (GNUS, MethodObj)
- External (GIOR, MethodObj)
- External (GMEM, MethodObj)
- External (GWBN, MethodObj)
- External (GBUS, MethodObj)
-
- External (PICF)
-
- External (\_SB.PCI0.LNKA, DeviceObj)
- External (\_SB.PCI0.LNKB, DeviceObj)
- External (\_SB.PCI0.LNKC, DeviceObj)
- External (\_SB.PCI0.LNKD, DeviceObj)
-
- Device (PCI2)
- {
-
- // BUS ? Second HT Chain
- Name (HCIN, 0x01) // HC2
-
- Name (_HID, "PNP0A03")
-
- Method (_ADR, 0, NotSerialized) //Fake bus should be 0
- {
- Return (DADD(GHCN(HCIN), 0x00180000))
- }
-
- Name (_UID, 0x03)
-
- Method (_BBN, 0, NotSerialized)
- {
- Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
- }
-
- Method (_STA, 0, NotSerialized)
- {
- Return (\_SB.GHCE(HCIN))
- }
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate () { })
- Store( GHCN(HCIN), Local4)
- Store( GHCL(HCIN), Local5)
-
- Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
- Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
- Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
- Return (Local3)
- }
-
- Include ("pci2_hc.asl")
- }
- }
-
-}
-
diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl
deleted file mode 100644
index 045d090392..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl
+++ /dev/null
@@ -1 +0,0 @@
- Include ("amd8151.asl")
diff --git a/src/mainboard/amd/serengeti_leopard/dx/superio.asl b/src/mainboard/amd/serengeti_leopard/dx/superio.asl
deleted file mode 100644
index 86a10a94ae..0000000000
--- a/src/mainboard/amd/serengeti_leopard/dx/superio.asl
+++ /dev/null
@@ -1 +0,0 @@
-// Include ("w83627hf.asl")
diff --git a/src/mainboard/amd/serengeti_leopard/fadt.c b/src/mainboard/amd/serengeti_leopard/fadt.c
deleted file mode 100644
index 3442082467..0000000000
--- a/src/mainboard/amd/serengeti_leopard/fadt.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * ACPI - create the Fixed ACPI Description Tables (FADT)
- * (C) Copyright 2005 Stefan Reinauer <stepan@openbios.org>
- */
-
-#include <string.h>
-#include <console/console.h>
-#include <arch/acpi.h>
-
-extern unsigned pm_base; /* pm_base should be set in sb acpi */
-
-void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){
-
- acpi_header_t *header=&(fadt->header);
-
- printk_debug("pm_base: 0x%04x\n", pm_base);
-
- /* Prepare the header */
- memset((void *)fadt,0,sizeof(acpi_fadt_t));
- memcpy(header->signature,"FACP",4);
- header->length = 244;
- header->revision = 1;
- memcpy(header->oem_id,OEM_ID,6);
- memcpy(header->oem_table_id,"LXBACPI ",8);
- memcpy(header->asl_compiler_id,ASLC,4);
- header->asl_compiler_revision=0;
-
- fadt->firmware_ctrl=(u32)facs;
- fadt->dsdt= (u32)dsdt;
- fadt->res1=0x0;
- // 3=Workstation,4=Enterprise Server, 7=Performance Server
- fadt->preferred_pm_profile=0x03;
- fadt->sci_int=9;
- // disable system management mode by setting to 0:
- fadt->smi_cmd = 0;//pm_base+0x2f;
- fadt->acpi_enable = 0xf0;
- fadt->acpi_disable = 0xf1;
- fadt->s4bios_req = 0x0;
- fadt->pstate_cnt = 0xe2;
-
- fadt->pm1a_evt_blk = pm_base;
- fadt->pm1b_evt_blk = 0x0000;
- fadt->pm1a_cnt_blk = pm_base+0x04;
- fadt->pm1b_cnt_blk = 0x0000;
- fadt->pm2_cnt_blk = 0x0000;
- fadt->pm_tmr_blk = pm_base+0x08;
- fadt->gpe0_blk = pm_base+0x20;
- fadt->gpe1_blk = pm_base+0xb0;
-
- fadt->pm1_evt_len = 4;
- fadt->pm1_cnt_len = 2;
- fadt->pm2_cnt_len = 0;
- fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 4;
- fadt->gpe1_blk_len = 8;
- fadt->gpe1_base = 16;
-
- fadt->cst_cnt = 0xe3;
- fadt->p_lvl2_lat = 101;
- fadt->p_lvl3_lat = 1001;
- fadt->flush_size = 0;
- fadt->flush_stride = 0;
- fadt->duty_offset = 1;
- fadt->duty_width = 3;
- fadt->day_alrm = 0; // 0x7d these have to be
- fadt->mon_alrm = 0; // 0x7e added to cmos.layout
- fadt->century = 0; // 0x7f to make rtc alrm work
- fadt->iapc_boot_arch = 0x3; // See table 5-11
- fadt->flags = 0x25;
-
- fadt->res2 = 0;
-
- fadt->reset_reg.space_id = 1;
- fadt->reset_reg.bit_width = 8;
- fadt->reset_reg.bit_offset = 0;
- fadt->reset_reg.resv = 0;
- fadt->reset_reg.addrl = 0xcf9;
- fadt->reset_reg.addrh = 0x0;
-
- fadt->reset_value = 6;
- fadt->x_firmware_ctl_l = (u32)facs;
- fadt->x_firmware_ctl_h = 0;
- fadt->x_dsdt_l = (u32)dsdt;
- fadt->x_dsdt_h = 0;
-
- fadt->x_pm1a_evt_blk.space_id = 1;
- fadt->x_pm1a_evt_blk.bit_width = 32;
- fadt->x_pm1a_evt_blk.bit_offset = 0;
- fadt->x_pm1a_evt_blk.resv = 0;
- fadt->x_pm1a_evt_blk.addrl = pm_base;
- fadt->x_pm1a_evt_blk.addrh = 0x0;
-
- fadt->x_pm1b_evt_blk.space_id = 1;
- fadt->x_pm1b_evt_blk.bit_width = 4;
- fadt->x_pm1b_evt_blk.bit_offset = 0;
- fadt->x_pm1b_evt_blk.resv = 0;
- fadt->x_pm1b_evt_blk.addrl = 0x0;
- fadt->x_pm1b_evt_blk.addrh = 0x0;
-
-
- fadt->x_pm1a_cnt_blk.space_id = 1;
- fadt->x_pm1a_cnt_blk.bit_width = 16;
- fadt->x_pm1a_cnt_blk.bit_offset = 0;
- fadt->x_pm1a_cnt_blk.resv = 0;
- fadt->x_pm1a_cnt_blk.addrl = pm_base+4;
- fadt->x_pm1a_cnt_blk.addrh = 0x0;
-
- fadt->x_pm1b_cnt_blk.space_id = 1;
- fadt->x_pm1b_cnt_blk.bit_width = 2;
- fadt->x_pm1b_cnt_blk.bit_offset = 0;
- fadt->x_pm1b_cnt_blk.resv = 0;
- fadt->x_pm1b_cnt_blk.addrl = 0x0;
- fadt->x_pm1b_cnt_blk.addrh = 0x0;
-
-
- fadt->x_pm2_cnt_blk.space_id = 1;
- fadt->x_pm2_cnt_blk.bit_width = 0;
- fadt->x_pm2_cnt_blk.bit_offset = 0;
- fadt->x_pm2_cnt_blk.resv = 0;
- fadt->x_pm2_cnt_blk.addrl = 0x0;
- fadt->x_pm2_cnt_blk.addrh = 0x0;
-
-
- fadt->x_pm_tmr_blk.space_id = 1;
- fadt->x_pm_tmr_blk.bit_width = 32;
- fadt->x_pm_tmr_blk.bit_offset = 0;
- fadt->x_pm_tmr_blk.resv = 0;
- fadt->x_pm_tmr_blk.addrl = pm_base+0x08;
- fadt->x_pm_tmr_blk.addrh = 0x0;
-
-
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 32;
- fadt->x_gpe0_blk.bit_offset = 0;
- fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = pm_base+0x20;
- fadt->x_gpe0_blk.addrh = 0x0;
-
-
- fadt->x_gpe1_blk.space_id = 1;
- fadt->x_gpe1_blk.bit_width = 64;
- fadt->x_gpe1_blk.bit_offset = 16;
- fadt->x_gpe1_blk.resv = 0;
- fadt->x_gpe1_blk.addrl = pm_base+0xb0;
- fadt->x_gpe1_blk.addrh = 0x0;
-
- header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
-
-}
diff --git a/src/mainboard/amd/serengeti_leopard/failover.c b/src/mainboard/amd/serengeti_leopard/failover.c
deleted file mode 100644
index 345d3f4d1a..0000000000
--- a/src/mainboard/amd/serengeti_leopard/failover.c
+++ /dev/null
@@ -1,90 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
- /* Make cerain my local apic is useable */
-// enable_lapic();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- /* Is this a cpu only reset? */
- if (cpu_init_detected(id.nodeid)) {
-#else
-// nodeid = lapicid() & 0xf;
- nodeid = get_node_id();
- /* Is this a cpu only reset? */
- if (cpu_init_detected(nodeid)) {
-#endif
- /* Is this a cpu only reset? */
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
-#if 0
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
-#endif
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/amd/serengeti_leopard/get_bus_conf.c b/src/mainboard/amd/serengeti_leopard/get_bus_conf.c
deleted file mode 100644
index 25a5a8ed46..0000000000
--- a/src/mainboard/amd/serengeti_leopard/get_bus_conf.c
+++ /dev/null
@@ -1,147 +0,0 @@
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#if CONFIG_LOGICAL_CPUS==1
-#include <cpu/amd/dualcore.h>
-#endif
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-unsigned char bus_isa = 7 ;
-unsigned char bus_8132_0 = 1;
-unsigned char bus_8132_1 = 2;
-unsigned char bus_8132_2 = 3;
-unsigned char bus_8111_0 = 1;
-unsigned char bus_8111_1 = 4;
-unsigned char bus_8151_0 = 5;
-unsigned char bus_8151_1 = 6;
-unsigned apicid_8111 ;
-unsigned apicid_8132_1;
-unsigned apicid_8132_2;
-
-static unsigned pci1234x[] =
-{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
-};
-static unsigned hcdnx[] =
-{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-};
-
-unsigned sbdn3;
-unsigned sbdn5;
-
-extern void get_sblk_pci1234(void);
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
-
- unsigned apicid_base;
-
- device_t dev;
- int i;
-
- if(get_bus_conf_done==1) return; //do it only once
-
- get_bus_conf_done = 1;
-
- sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
- for(i=0;i<sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
- sbdn3 = sysconf.hcdn[0] & 0xff;
- sbdn5 = sysconf.hcdn[1] & 0xff;
-
- bus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff;
- bus_8111_0 = bus_8132_0;
-
- /* 8111 */
- dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
- if (dev) {
- bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
-// printk_debug("bus_isa=%d\n",bus_isa);
-#endif
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8111_0, sysconf.sbdn);
- }
-
- /* 8132-1 */
- dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3,0));
- if (dev) {
- bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8132_0, sbdn3);
- }
-
- /* 8132-2 */
- dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3+1,0));
- if (dev) {
- bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
-// printk_debug("bus_isa=%d\n",bus_isa);
-#endif
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8132_0, sbdn3+1);
- }
-
- /* HT chain 1 */
- if((sysconf.pci1234[1] & 0x1) == 1) {
- bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff;
- /* 8151 */
- dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0));
-
- if (dev) {
- bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-// printk_debug("bus_8151_1=%d\n",bus_8151_1);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8151_0, sbdn5+1);
- }
- }
-
-/*I/O APICs: APIC ID Version State Address*/
-#if CONFIG_LOGICAL_CPUS==1
- apicid_base = get_apicid_base(3);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
-#endif
- apicid_8111 = apicid_base+0;
- apicid_8132_1 = apicid_base+1;
- apicid_8132_2 = apicid_base+2;
-}
diff --git a/src/mainboard/amd/serengeti_leopard/irq_tables.c b/src/mainboard/amd/serengeti_leopard/irq_tables.c
deleted file mode 100644
index 0f5887becb..0000000000
--- a/src/mainboard/amd/serengeti_leopard/irq_tables.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
-
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-extern unsigned char bus_8132_0;
-extern unsigned char bus_8132_1;
-extern unsigned char bus_8132_2;
-extern unsigned char bus_8111_0;
-extern unsigned char bus_8111_1;
-extern unsigned char bus_8151_0;
-extern unsigned char bus_8151_1;
-
-extern unsigned sbdn3;
-extern unsigned sbdn5;
-
-extern void get_bus_conf(void);
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
-
- uint8_t sum=0;
- int i;
-
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *)(addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = bus_8111_0;
- pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1022;
- pirq->rtr_device = 0x746b;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *) ( &pirq->checksum + 1);
- slot_num = 0;
-//pci bridge
- write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
-//pcix bridge
-// write_pirq_info(pirq_info, bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-// pirq_info++; slot_num++;
-
- if(sysconf.pci1234[1] & 0xf) {
- //agp bridge
- write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- }
-
- pirq_info++; slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk_info("done.\n");
-
- return (unsigned long) pirq_info;
-
-}
diff --git a/src/mainboard/amd/serengeti_leopard/license.txt b/src/mainboard/amd/serengeti_leopard/license.txt
deleted file mode 100644
index 8993902d3e..0000000000
--- a/src/mainboard/amd/serengeti_leopard/license.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-*============================================================================
-Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved.
-This software and any related documentation (the "Materials") are the
-confidential proprietary information of AMD. Unless otherwise provided in a
-software agreement specifically licensing the Materials, the Materials are
-provided in confidence and may not be distributed, modified, or reproduced in
-whole or in part by any means.
-LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY
-EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO
-WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY
-PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR
-USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY
-DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,
-BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR
-INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION
-OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
-LIMITATION MAY NOT APPLY TO YOU.
-AMD does not assume any responsibility for any errors which may appear in the
-Materials nor any responsibility to support or update the Materials. AMD
-retains the right to modify the Materials at any time, without notice, and is
-not obligated to provide such modified Materials to you.
-NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any
-further information, software, technical information, know-how, or show-how
-available to you.
-U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED
-RIGHTS." Use, duplication, or disclosure by the Government is subject to the
-restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or
-its successor. Use of the Materials by the Government constitutes
-acknowledgement of AMD's proprietary rights in them.
-============================================================================*/
-code in this dir
diff --git a/src/mainboard/amd/serengeti_leopard/mainboard.c b/src/mainboard/amd/serengeti_leopard/mainboard.c
deleted file mode 100644
index 2002bd14de..0000000000
--- a/src/mainboard/amd/serengeti_leopard/mainboard.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <device/device.h>
-#include "chip.h"
-
-#if CONFIG_CHIP_NAME == 1
-struct chip_operations mainboard_amd_serengeti_leopard_ops = {
- CHIP_NAME("AMD Serengeti Leopard Mainboard")
-};
-#endif
-
diff --git a/src/mainboard/amd/serengeti_leopard/mptable.c b/src/mainboard/amd/serengeti_leopard/mptable.c
deleted file mode 100644
index 5d2ed74f7f..0000000000
--- a/src/mainboard/amd/serengeti_leopard/mptable.c
+++ /dev/null
@@ -1,156 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#if CONFIG_LOGICAL_CPUS==1
-#include <cpu/amd/dualcore.h>
-#endif
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-extern unsigned char bus_isa;
-extern unsigned char bus_8132_0;
-extern unsigned char bus_8132_1;
-extern unsigned char bus_8132_2;
-extern unsigned char bus_8111_0;
-extern unsigned char bus_8111_1;
-extern unsigned char bus_8151_0;
-extern unsigned char bus_8151_1;
-extern unsigned apicid_8111;
-extern unsigned apicid_8132_1;
-extern unsigned apicid_8132_2;
-
-extern unsigned sbdn3;
-extern unsigned sbdn5;
-
-extern void get_bus_conf(void);
-
-void *smp_write_config_table(void *v)
-{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "AMD ";
- static const char productid[12] = "SERENGETI ";
- struct mp_config_table *mc;
-
- unsigned char bus_num;
- int i;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
-
- get_bus_conf();
-
-/*Bus: Bus ID Type*/
- /* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
-
-/*I/O APICs: APIC ID Version State Address*/
- smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); //8111
- {
- device_t dev;
- struct resource *res;
- dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3, 1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, apicid_8132_1, 0x11, res->base);
- }
- }
- dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3+1, 1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, apicid_8132_2, 0x11, res->base);
- }
- }
- }
-
-/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
-*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_8111, 0x4);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, apicid_8111, 0x5);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_8111, 0x6);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_8111, 0x7);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_8111, 0x8);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, apicid_8111, 0x9);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_8111, 0xc);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf);
-//??? What
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13);
-
-// Onboard AMD USB
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
-
- if(sysconf.pci1234[1] & 0xf) {
- // Slot AGP
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x11);
- }
-
-//Slot 3 PCI 32
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|i, apicid_8111, 0x10 + (1+i)%4); //16
- }
-
-
-//Slot 4 PCI 32
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|i, apicid_8111, 0x10 + (0+i)%4); //16
- }
-
-
-//Slot 1 PCI-X 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8132_2, (1<<2)|i, apicid_8132_2, (0+i)%4); //
- }
-
-
-//Slot 2 PCI-X 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8132_1, (1<<2)|i, apicid_8132_1, (1+i)%4); //25
- }
-
-
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
- smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
- mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n",
- mc, smp_next_mpe_entry(mc));
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/amd/serengeti_leopard/readme_acpi.txt b/src/mainboard/amd/serengeti_leopard/readme_acpi.txt
deleted file mode 100644
index 2fb327daec..0000000000
--- a/src/mainboard/amd/serengeti_leopard/readme_acpi.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-At this time, For acpi support We got
-1. support AMK K8 SRAT --- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c)
-2. support MADT ---- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c)
-3. support DSDT ---- dynamically (Compile time, LinuxBIOS run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{dx/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c)
-4. Chipset support: amd8111, amd8132
-
-The developers need to change for different MB
-
-Change dx/dsdt_lb.dsl, according to MB layout
- pci1, pci2, pci3, pci4, ...., pci8
- if there is HT-IO board, may use pci2.asl.... to create ssdt2.c, and ssdt3,c and ssdt4.c, ....ssdt8.c
-
-Change acpi_tables.c
- sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is LinuxBIOS run-time configurable now.
- if there is HT-IO board, need to adjust SSDTX_NUM...., and preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed
-
-Regarding pci bridge apic and pic
- need to modify entries amd8111.asl and amd8131.asl and amd8151.asl.... acording to your MB laybout, it is like that in mptable.c
-
-About other chipsets, need to develop their special asl such as
- ck804.asl --- NB ck804
- bcm5785.asl or bcm5780.asl ---- Serverworks HT1000/HT2000
-
-use a to create hex file
-use c to delele hex file
-
-yhlu
-
-09/18/2005
-
diff --git a/src/mainboard/amd/serengeti_leopard/reset.c b/src/mainboard/amd/serengeti_leopard/reset.c
deleted file mode 100644
index 3db3956ec6..0000000000
--- a/src/mainboard/amd/serengeti_leopard/reset.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "../../../southbridge/amd/amd8111/amd8111_reset.c"
-
-void hard_reset(void)
-{
- amd8111_hard_reset(0, 0);
-}
diff --git a/src/mainboard/amd/serengeti_leopard/resourcemap.c b/src/mainboard/amd/serengeti_leopard/resourcemap.c
deleted file mode 100644
index 7d2a7ece28..0000000000
--- a/src/mainboard/amd/serengeti_leopard/resourcemap.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * AMD serengeti_leopard needs a different resource map
- *
- */
-
-static void setup_serengeti_leopard_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, // AMD 8151 on link0 of CPU 1
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
- };
-
- int max;
- max = sizeof(register_values)/sizeof(register_values[0]);
- setup_resource_map(register_values, max);
-}
-
diff --git a/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl b/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl
deleted file mode 100644
index 7e835b6632..0000000000
--- a/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2005 AMD
- */
-DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-K8", "AMD-ACPI", 100925440)
-{
- /*
- * These objects were referenced but not defined in this table
- */
- External (\_SB_.PCI0, DeviceObj)
-
- Scope (\_SB.PCI0)
- {
- Name (BUSN, Package (0x04)
- {
- 0x11111111,
- 0x22222222,
- 0x33333333,
- 0x44444444
- })
- Name (MMIO, Package (0x10)
- {
- 0x11111111,
- 0x22222222,
- 0x33333333,
- 0x44444444,
- 0x55555555,
- 0x66666666,
- 0x77777777,
- 0x88888888,
- 0x99999999,
- 0xaaaaaaaa,
- 0xbbbbbbbb,
- 0xcccccccc,
- 0xdddddddd,
- 0xeeeeeeee,
- 0x11111111,
- 0x22222222
- })
- Name (PCIO, Package (0x08)
- {
- 0x77777777,
- 0x88888888,
- 0x99999999,
- 0xaaaaaaaa,
- 0xbbbbbbbb,
- 0xcccccccc,
- 0xdddddddd,
- 0xeeeeeeee
- })
- Name (SBLK, 0x11)
- Name (TOM1, 0xaaaaaaaa)
- Name (SBDN, 0xbbbbbbbb)
- Name (HCLK, Package (0x08)
- {
- 0x11111111,
- 0x22222222,
- 0x33333333,
- 0x44444444,
- 0x55555555,
- 0x66666666,
- 0x77777777,
- 0x88888888
- })
- Name (HCDN, Package (0x08)
- {
- 0x11111111,
- 0x22222222,
- 0x33333333,
- 0x44444444,
- 0x55555555,
- 0x66666666,
- 0x77777777,
- 0x88888888
- })
- }
-}
-
diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb
deleted file mode 100644
index f7efc861ad..0000000000
--- a/src/mainboard/amd/solo/Config.lb
+++ /dev/null
@@ -1,221 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-if HAVE_ACPI_TABLES object acpi_tables.o end
-#object reset.o
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-# sample config for arima/hdama
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/nsc/pc87360
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.8 off end # ACB
- device pnp 2e.9 off end # FSCM
- device pnp 2e.a off end # WDT
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic
- #phillips pca9545 smbus mux
- device i2c 70 on
- # analog_devices adm1026
- chip drivers/generic/generic
- device i2c 2c on end
- end
- end
- device i2c 70 on end
- device i2c 70 on end
- device i2c 70 on end
- end
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- end
- device pci 1.5 off end
- device pci 1.6 on end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end # LDT1
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
- device apic_cluster 0 on
- chip cpu/amd/socket_754
- device apic 0 on end
- end
- end
-end
-
diff --git a/src/mainboard/amd/solo/Options.lb b/src/mainboard/amd/solo/Options.lb
deleted file mode 100644
index beef9278c2..0000000000
--- a/src/mainboard/amd/solo/Options.lb
+++ /dev/null
@@ -1,209 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROM_PAYLOAD_START
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses LINUXBIOS_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-
-uses CONFIG_USE_INIT
-
-
-###
-### Build options
-###
-
-##
-## ROM_SIZE is the size of boot ROM that this board will use.
-##
-default ROM_SIZE=524288
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default FALLBACK_SIZE=0x40000
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=1
-default CONFIG_MAX_PHYSICAL_CPUS=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="SOLO"
-default MAINBOARD_VENDOR="AMD"
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CROSS_COMPILE=""
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/solo/acpi_tables.c b/src/mainboard/amd/solo/acpi_tables.c
deleted file mode 100644
index 9c2aeadd2d..0000000000
--- a/src/mainboard/amd/solo/acpi_tables.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * LinuxBIOS ACPI support for AMD Solo
- * written by Stefan Reinauer <stepan@openbios.org>
- * (C) 2005 Stefan Reinauer
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <device/pci.h>
-
-
-unsigned long acpi_dump_apics(unsigned long current)
-{
-#define IO_APIC_ADDR 0xfec00000UL
- /* create all subtables for 1p */
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, 2,
- IO_APIC_ADDR);
- current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 1 /* active high */);
- current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xf /* active low, level triggered */);
- current += acpi_create_madt_lapic_nmi( (acpi_madt_lapic_nmi_t *)
- current, 0, 5, 1);
- return current;
-}
-
-unsigned long write_acpi_tables(unsigned long start)
-{
- unsigned long current;
- acpi_rsdp_t *rsdp;
- acpi_rsdt_t *rsdt;
- acpi_hpet_t *hpet;
- acpi_madt_t *madt;
- acpi_fadt_t *fadt;
- acpi_facs_t *facs;
- acpi_header_t *dsdt;
-
- /* Align ACPI tables to 16byte */
- start = ( start + 0x0f ) & -0x10;
- current = start;
-
- printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
-
- /* We need at least an RSDP and an RSDT Table */
- rsdp = (acpi_rsdp_t *) current;
- current += sizeof(acpi_rsdp_t);
- rsdt = (acpi_rsdt_t *) current;
- current += sizeof(acpi_rsdt_t);
-
- /* clear all table memory */
- memset((void *)start, 0, current - start);
-
- acpi_write_rsdp(rsdp, rsdt);
- acpi_write_rsdt(rsdt);
-
- /*
- * We explicitly add these tables later on:
- */
- printk_debug("ACPI: * HPET\n");
-
- hpet = (acpi_hpet_t *) current;
- current += sizeof(acpi_hpet_t);
- acpi_create_hpet(hpet);
- acpi_add_table(rsdt,hpet);
-
- /* If we want to use HPET Timers Linux wants an MADT */
- printk_debug("ACPI: * MADT\n");
-
- madt = (acpi_madt_t *) current;
- acpi_create_madt(madt);
- current+=madt->header.length;
- acpi_add_table(rsdt,madt);
-
-#ifdef HAVE_ACPI_FADT
- printk_debug("ACPI: * FACS\n");
- facs = (acpi_facs_t *) current;
- current += sizeof(acpi_facs_t);
- acpi_create_facs(facs);
-
-
- dsdt = (acpi_header_t *)current;
- current += ((acpi_header_t *)AmlCode)->length;
- memcpy((void *)dsdt,(void *)AmlCode, ((acpi_header_t *)AmlCode)->length);
- dsdt->checksum = 0; // don't trust intel iasl compiler to get this right
- dsdt->checksum = acpi_checksum(dsdt,dsdt->length);
- printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length);
- printk_debug("ACPI: * FADT\n");
-
- fadt = (acpi_fadt_t *) current;
- current += sizeof(acpi_fadt_t);
-
- acpi_create_fadt(fadt,facs,dsdt);
- acpi_add_table(rsdt,fadt);
-#endif
-
- printk_info("ACPI: done.\n");
- return current;
-}
-
diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c
deleted file mode 100644
index 34a79cb514..0000000000
--- a/src/mainboard/amd/solo/auto.c
+++ /dev/null
@@ -1,152 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x05, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x05, 0), 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (0 << 0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (0 << 0), SMBUS_IO_BASE + 0xc0 + 29);
- } else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (1 << 0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (1 << 0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static unsigned int generate_row(uint8_t node, uint8_t row,
- uint8_t maxnodes)
-{
- /* since the AMD Solo is a UP only machine, we can
- * always return the default row entry value
- */
- return 0x00010101; /* default row entry */
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = {(0xa << 3) | 0, (0xa << 3) | 1, 0, 0},
- .channel1 = {0, 0, 0, 0},
- }
- };
-
- int needs_reset;
- unsigned nodeid;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- /* Setup the console */
- pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
-
- memreset_setup();
- sdram_initialize(sizeof(cpu) / sizeof(cpu[0]), cpu);
-
-#if 0
- dump_pci_devices();
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-
- /* Check the first 1M */
- ram_check(0x00000000, 0x000100000);
-#endif
-}
diff --git a/src/mainboard/amd/solo/chip.h b/src/mainboard/amd/solo/chip.h
deleted file mode 100644
index 941c656e2e..0000000000
--- a/src/mainboard/amd/solo/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_amd_solo_ops;
-
-struct mainboard_amd_solo_config {
- int nothing;
-};
diff --git a/src/mainboard/amd/solo/cmos.layout b/src/mainboard/amd/solo/cmos.layout
deleted file mode 100644
index 5eb88b9a5a..0000000000
--- a/src/mainboard/amd/solo/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 reserved_memory
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-8 0 DDR400
-8 1 DDR333
-8 2 DDR266
-8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/amd/solo/failover.c b/src/mainboard/amd/solo/failover.c
deleted file mode 100644
index 1738e908d9..0000000000
--- a/src/mainboard/amd/solo/failover.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/amd/solo/irq_tables.c b/src/mainboard/amd/solo/irq_tables.c
deleted file mode 100644
index 783d8bd7b8..0000000000
--- a/src/mainboard/amd/solo/irq_tables.c
+++ /dev/null
@@ -1,59 +0,0 @@
-#include <arch/pirq_routing.h>
-#include <device/pci.h>
-
-#define IRQ_ROUTER_BUS 1
-#define IRQ_ROUTER_DEVFN PCI_DEVFN(5,0)
-#define IRQ_ROUTER_VENDOR 0x1022
-#define IRQ_ROUTER_DEVICE 0x7468
-#define IRQS_EXCLUSIVE 0x0c20
-#define IRQS_AVAILABLE 0xdeb8
-
-
-#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
- { bus, (dev<<3)|fn, {{ linka, IRQS_AVAILABLE}, { linkb, IRQS_AVAILABLE}, \
- {linkc, IRQS_AVAILABLE}, {linkd, IRQS_AVAILABLE}}, slot, 0}
-
-/* Each IRQ_SLOT entry consists of:
- * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
- */
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32 + 16 * IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT
- * devices on the bus */
- IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */
- IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */
- IRQS_EXCLUSIVE, /* IRQs devoted exclusively to PCI usage */
- IRQ_ROUTER_VENDOR, /* Vendor */
- IRQ_ROUTER_DEVICE, /* Device */
- 0x00, /* Crap (miniport) */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
- 0x00, /* u8 checksum , mod 256 checksum must give
- * zero, will be corrected later
- */
- {
-
- /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
-
- /* PCI SLOT 1-4 */
- IRQ_SLOT(1, 3, 4, 0, 1, 2, 3, 4),
- IRQ_SLOT(2, 3, 5, 0, 2, 3, 4, 1),
- IRQ_SLOT(3, 3, 6, 0, 3, 4, 1, 2),
- IRQ_SLOT(4, 3, 7, 0, 4, 1, 2, 3),
-
- /* Builtin Devices */
- IRQ_SLOT(0, 3, 0, 0, 4, 4, 4, 4), /* USB */
- IRQ_SLOT(0, 1, 5, 1, 1, 2, 3, 4), /* IDE */
- IRQ_SLOT(0, 1, 2, 0, 1, 2, 3, 4), /* AGP Bridge */
-
- /* Let Linux know about bus 1 */
- IRQ_SLOT(0, 1, 5, 0, 0, 0, 0, 0),
-
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/amd/solo/mainboard.c b/src/mainboard/amd/solo/mainboard.c
deleted file mode 100644
index 4c482402c1..0000000000
--- a/src/mainboard/amd/solo/mainboard.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <device/device.h>
-#include "chip.h"
-
-struct chip_operations mainboard_amd_solo_ops = {
- CHIP_NAME("AMD Solo7 Mainboard")
-};
-
diff --git a/src/mainboard/amd/solo/mptable.c b/src/mainboard/amd/solo/mptable.c
deleted file mode 100644
index a21a49489b..0000000000
--- a/src/mainboard/amd/solo/mptable.c
+++ /dev/null
@@ -1,241 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-void *smp_write_config_table(void *v)
-{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "AMD ";
- static const char productid[12] = "SOLO7 ";
- struct mp_config_table *mc;
- unsigned char bus_num;
- unsigned char bus_isa;
- unsigned char bus_8151_1;
- unsigned char bus_8111_1;
-
- mc = (void *) (((char *) v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
-
- {
- device_t dev;
-
- printk_info("creating mp table...\n");
-
- /* 8111 */
- dev = dev_find_slot(1, PCI_DEVFN(0x04, 0));
- if (dev) {
- bus_8111_1 =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa =
- pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- printk_debug(" mptable: 8111 PCI bus %d\n",
- bus_8111_1);
- printk_debug(" mptable: 8111 ISA bus %d\n",
- bus_isa);
- } else {
- printk_debug
- ("ERROR - could not find 8111 at PCI 1:04.0, using defaults\n");
-
- bus_8111_1 = 3;
- bus_isa = 4;
- }
- /* 8151-1 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01, 0));
- if (dev) {
- bus_8151_1 =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- printk_debug(" mptable: 8151 PCI bus %d\n",
- bus_8151_1);
- } else {
- printk_debug
- ("ERROR - could not find 8151 at PCI 1:01.0, using defaults\n");
-
- bus_8151_1 = 2;
- }
- }
-
- /* define bus and isa numbers */
- for (bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
-
- /* IOAPIC handling */
-
- smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
-
- /* ISA backward compatibility interrupts */
- smp_write_intsrc(mc, mp_ExtINT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, 0x02, 0x00);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x01, 0x02, 0x01);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, 0x02, 0x02);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x03, 0x02, 0x03);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x04, 0x02, 0x04);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x05, 0x02, 0x05);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x06, 0x02, 0x06);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x07, 0x02, 0x07);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x08, 0x02, 0x08);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x09, 0x02, 0x09);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0a, 0x02, 0x0a);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0b, 0x02, 0x0b);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0c, 0x02, 0x0c);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0d, 0x02, 0x0d);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0e, 0x02, 0x0e);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0f, 0x02, 0x0f);
-
- /* Standard local interrupt assignments */
- smp_write_lintsrc(mc, mp_ExtINT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, MP_APIC_ALL, 0x00);
- smp_write_lintsrc(mc, mp_NMI,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, MP_APIC_ALL, 0x01);
-
-
- /* AGP Slot */
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8151_1, (0 << 2) | 0, 0x02, 0x10);
-
- /* PCI Slot 1 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4 << 2) | 0, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4 << 2) | 1, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4 << 2) | 2, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4 << 2) | 3, 0x02, 0x13);
-
-
- /* PCI Slot 2 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5 << 2) | 0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5 << 2) | 1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5 << 2) | 2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5 << 2) | 3, 0x02, 0x10);
-
-
- /* PCI Slot 3 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (6 << 2) | 0, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (6 << 2) | 1, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (6 << 2) | 2, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (6 << 2) | 3, 0x02, 0x11);
-
- /* PCI Slot 4 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (7 << 2) | 0, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (7 << 2) | 1, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (7 << 2) | 2, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (7 << 2) | 3, 0x02, 0x12);
-
- /* Local devices */
-
- /* USB */
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
- bus_8111_1, (0 << 2) | 3, 0x02, 0x13);
- /* Sound */
- smp_write_intsrc(mc, mp_INT,
- MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
- 1, (5 << 2) | 1, 0x02, 0x11);
-
-
- /* There is no extension information... */
-
- /* Compute the checksums */
- mc->mpe_checksum =
- smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
-
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n",
- mc, smp_next_mpe_entry(mc));
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long) smp_write_config_table(v);
-}
diff --git a/src/mainboard/amd/solo/reset.c b/src/mainboard/amd/solo/reset.c
deleted file mode 100644
index 3db3956ec6..0000000000
--- a/src/mainboard/amd/solo/reset.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "../../../southbridge/amd/amd8111/amd8111_reset.c"
-
-void hard_reset(void)
-{
- amd8111_hard_reset(0, 0);
-}
diff --git a/targets/amd/quartet/Config-abuild.lb b/targets/amd/quartet/Config-abuild.lb
deleted file mode 100644
index 0034d9bb6b..0000000000
--- a/targets/amd/quartet/Config-abuild.lb
+++ /dev/null
@@ -1,28 +0,0 @@
-# This will make a target directory of ./VENDOR_MAINBOARD
-
-target VENDOR_MAINBOARD
-mainboard VENDOR/MAINBOARD
-
-option CC="CROSSCC"
-option CROSS_COMPILE="CROSS_PREFIX"
-option HOSTCC="CROSS_HOSTCC"
-
-__COMPRESSION__
-
-option ROM_SIZE=512*1024
-
-
-romimage "normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-normal"
- payload PAYLOAD
-end
-
-romimage "fallback"
- option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-fallback"
- payload PAYLOAD
-end
-buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/amd/quartet/Config.lb b/targets/amd/quartet/Config.lb
deleted file mode 100644
index 0930d6b1d4..0000000000
--- a/targets/amd/quartet/Config.lb
+++ /dev/null
@@ -1,20 +0,0 @@
-# AMD Quartet
-
-target quartet
-mainboard amd/quartet
-
-romimage "normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-Normal"
- payload ../../../payloads/tg3--ide_disk.zelf
-end
-
-romimage "fallback"
- option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-Fallback"
- payload ../../../payloads/tg3--ide_disk.zelf
-end
-
-buildrom ./quartet.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/amd/serenade/Config.lb b/targets/amd/serenade/Config.lb
deleted file mode 100644
index b1d400c311..0000000000
--- a/targets/amd/serenade/Config.lb
+++ /dev/null
@@ -1,20 +0,0 @@
-# AMD Serenade
-
-target serenade
-mainboard amd/serenade
-
-romimage "normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-Normal"
- payload /home/ollie/work/filo-0.4.1/filo.elf
-end
-
-romimage "fallback"
- option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-Fallback"
- payload /home/ollie/work/filo-0.4.1/filo.elf
-end
-
-buildrom ./serenade.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/amd/serengeti_leopard/Config.lb b/targets/amd/serengeti_leopard/Config.lb
deleted file mode 100644
index 073a5d9857..0000000000
--- a/targets/amd/serengeti_leopard/Config.lb
+++ /dev/null
@@ -1,77 +0,0 @@
-# Sample config file for
-# the amd serengeti_leopard
-# This will make a target directory of ./serengeti_leopard
-
-target serengeti_leopard
-mainboard amd/serengeti_leopard
-
-# serengeti_leopard
-romimage "normal"
-# 48K for SCSI FW
-# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
-# 64K for Etherboot
-# option ROM_SIZE = 458752
- option USE_FAILOVER_IMAGE=0
- option USE_FALLBACK_IMAGE=0
-# option ROM_IMAGE_SIZE=0x13800
-# option ROM_IMAGE_SIZE=0x17800
-# option ROM_IMAGE_SIZE=0x15800
- option ROM_IMAGE_SIZE=0x20000
- option XIP_ROM_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
-# payload ../../../payloads/tg3--ide_disk.zelf
-# payload ../../../payloads/filo.elf
-# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo.zelf
-# payload ../../../payloads/tg3--filo_hda2.zelf
-# payload ../../../payloads/tg3.zelf
-# payload ../../../payloads/tg3_vga.zelf
-# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
- payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
-# payload ../../../payloads/tg3_com2.zelf
-# payload ../../../payloads/e1000--filo.zelf
-# payload ../../../payloads/tg3--e1000--filo.zelf
-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
-end
-
-romimage "fallback"
- option USE_FAILOVER_IMAGE=0
- option USE_FALLBACK_IMAGE=1
-# option ROM_IMAGE_SIZE=0x13800
-# option ROM_IMAGE_SIZE=0x17800
-# option ROM_IMAGE_SIZE=0x15800
- option ROM_IMAGE_SIZE=0x20000
- option XIP_ROM_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
-# payload ../../../payloads/tg3--ide_disk.zelf
-# payload ../../../payloads/filo.elf
-# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo.zelf
-# payload ../../../payloads/tg3--filo_hda2.zelf
-# payload ../../../payloads/tg3.zelf
-# payload ../../../payloads/tg3_vga.zelf
- payload ../../../../payloads/memtest
-# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
-# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
-# payload ../../../payloads/tg3_com2.zelf
-# payload ../../../payloads/e1000--filo.zelf
-# payload ../../../payloads/tg3--e1000--filo.zelf
-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
-end
-
-romimage "failover"
- option USE_FAILOVER_IMAGE=1
- option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=FAILOVER_SIZE
- option XIP_ROM_SIZE=FAILOVER_SIZE
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
-end
-
-buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"
-#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/amd/serengeti_leopard/VERSION b/targets/amd/serengeti_leopard/VERSION
deleted file mode 100644
index 980a8810bc..0000000000
--- a/targets/amd/serengeti_leopard/VERSION
+++ /dev/null
@@ -1 +0,0 @@
-_serengenti_leopard
diff --git a/targets/amd/solo/Config-8MBit.lb b/targets/amd/solo/Config-8MBit.lb
deleted file mode 100644
index b75cb9ba23..0000000000
--- a/targets/amd/solo/Config-8MBit.lb
+++ /dev/null
@@ -1,17 +0,0 @@
-# AMD Solo
-# This will make a target directory of ./solo
-
-
-target solo-8mbit
-mainboard amd/solo
-
-option ROM_SIZE=1024*1024
-
-romimage "only"
- option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x10000
- option LINUXBIOS_EXTRA_VERSION=".0"
- payload /usr/share/LinuxBIOS/kernelpayload.elf
-end
-
-buildrom ./solo-8mbit.rom ROM_SIZE "only"
diff --git a/targets/amd/solo/Config.lb b/targets/amd/solo/Config.lb
deleted file mode 100644
index 8188b605fa..0000000000
--- a/targets/amd/solo/Config.lb
+++ /dev/null
@@ -1,22 +0,0 @@
-# AMD Solo
-# This will make a target directory of ./solo
-
-
-target solo
-mainboard amd/solo
-
-romimage "normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-Normal"
- payload ../../../payloads/tg3--ide_disk.zelf
-end
-
-romimage "fallback"
- option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x20000
- option LINUXBIOS_EXTRA_VERSION=".0-Fallback"
- payload ../../../payloads/tg3--ide_disk.zelf
-end
-
-buildrom ./solo.rom ROM_SIZE "normal" "fallback"