Age | Commit message (Collapse) | Author |
|
This was caused by cl/176065849 where we added a per carrier check
to see if transcription is supported.
new screenshot:
https://drive.google.com/open?id=0B9o_KvtLkcuINkJ0R0JPTUZWSlpDMmlaRFdEUnJkY3pyTmxR
Bug: 67457582
Test: manual and updated unit test
PiperOrigin-RevId: 176389716
Change-Id: Ib41607a0ec6e9b40092d32fe055db80b6f9f8301
|
|
This cl just adds a check before starting a transcription job
to verify that the user has accepted the appropriate TOS. Its
a rather big cl just because it had to expose some TOS acceptance
details that were previously encapsulated in the VoicemailTosMessageCreator.
Bug: 69267260
Test: manual and unit tests
PiperOrigin-RevId: 176132370
Change-Id: Ic28fb197a07f9df7a9b5f1729c84566cba0890fc
|
|
Added a carrier config and check to see if the carrier allows over
the top voicemail transcription, and if not do not attempt transcription.
Bug: 68951869
Test: manual and unit test
PiperOrigin-RevId: 176065849
Change-Id: I69df1f2867420d7fdcc7f0a31e0e6c26da67abb1
|
|
This allows one notification per SIM to be shown on multi SIM devices
Bug: 64010653
Test: LegacyVoicemailNotifierTest
PiperOrigin-RevId: 175756590
Change-Id: I8c2fe3ec06c5e6868ddc647742ab9ef422494b3b
|
|
This CL replaces all instance of CallIntentBuilder.build() with PreCall.getIntent(), which when run as an activity, will finish building the intent with user interaction.
Bug: 64216442
Test: manual
PiperOrigin-RevId: 174924323
Change-Id: If41868df4c7ed078d03bd3431fa85b8947056a01
|
|
All voicemails are called by using CallIntentBuilder.forVoicemail() so the PhoneAccountHandle can be designated. A future CL will use dialogs to customize the call (multi SIM selection, RTT, etc.)
As a result voicemail error messages and legacy voicemail notifications will call the account it is received from directly.
Bug: 64216442
Test: Unit tests
PiperOrigin-RevId: 174784322
Change-Id: Ibe1c57bc7852e3d55a39a0cc2da19b6a79954c0f
|
|
The voicemail module should not contain any UI code.
Bug: 37258159
Test: DialerSettingsActivityTest,VoicemailSettingsFragmentTest. A future CL is refactoring VoicemailChangePinActivity into a fragment.
PiperOrigin-RevId: 174125949
Change-Id: I89cf6a083b0a0952332440d76e7ae0cb1c801931
|
|
We now use dagger everywhere for consistency and explicitness.
Test: tap
PiperOrigin-RevId: 174071122
Change-Id: I15d2f8261a7b753353be9e7d3b80692aa0c1b64d
|
|
DialerUtils#getDefaultSharedPreferenceForDeviceProtectedStorageContext(Context) to StorageComponent.
Bug: 30224215
Test: none
PiperOrigin-RevId: 173612463
Change-Id: Ia89d5d85c31ea2114b196393ae43b803023fc9bf
|
|
By always creating executor services via dagger, we can now bind special versions during espresso tests that can implement idling resources. We should be using idling resources during espresso tests for threads that we create ourselves, because espresso does not know about them.
Hopefully this reduces some of the flakiness of espresso tests that we have today.
This required converting all existing calls to DialerExecutors to pass a context used to fetch the component, and also required creating new application classes for espresso tests.
Test: temporarily added a task which just slept to DialtactsActivity and verified that its integration test failed due to idling resource timeout
PiperOrigin-RevId: 173334773
Change-Id: I876a93022d235d62cfc377bf5b06687e21a34758
|
|
It fixes AOSP for package name conflict.
Test: manual
PiperOrigin-RevId: 173298696
Change-Id: Id10ebe0bcf029e61f65cf6580c7198abd8395081
|
|
Bug: 67322107
Test: manual
PiperOrigin-RevId: 172656296
Change-Id: Ia8b7d508ef35ff0091b762c28e1091af60ce15b4
|
|
Bug: 66633426
Test: LegacyVoicemailNotificationReceiverTest
PiperOrigin-RevId: 172007744
Change-Id: Ic67566c22659b51d605c92d2673f9baddaee531f
|
|
Previously before showing a voicemail notification dialer checks if the count has changed to avoid showing duplicated notifications. With the dismissed flag in place the count changed check is redundant, and it prevents the notification to reshow after reboot.
Also updated the EXTRA_IS_REFRESH to use the O_MR public version.
Bug: 66633426
Test: LegacyVoicemailNotificationReceiverTest
PiperOrigin-RevId: 171760393
Change-Id: I508b8f42a44fd849ab7c8ca6fe9d4e7e8a38b1c7
|
|
and using non-breaking space in dialer TOS 'learn more' link.
screen shots:
https://drive.google.com/open?id=0B9o_KvtLkcuIV3BWWmxSTTlJQ2dBTnR2UHRGWjZJRlFQUGo0
https://drive.google.com/open?id=0B9o_KvtLkcuIOEJjanVhMXlfck81aU02Y0I2MkVtWFNOVGp3
Bug: 67379747
Test: manual and updated unit tests
PiperOrigin-RevId: 171025914
Change-Id: I9c4bfd899805681492a5063ee1bc674bbb98f630
|
|
Project Fi devices crash when declining voicemail TOS because
of an invalid PhoneAccountHandle. This cl fixes the problem by
not showing the TOS when the PhoneAccountHandle is not valid.
Bug: 67001886,66969838
Test: manual and updated unit tests
PiperOrigin-RevId: 170418189
Change-Id: I36dd0b10ab7468b0937a81f3f0427a4d64091955
|
|
screenshot:
https://drive.google.com/open?id=0B9o_KvtLkcuIdGY1RnVXM3JuMXB4OVRVOFhrSU9qRDR6c2pj
Bug: 37340510
Test: manual
PiperOrigin-RevId: 170131627
Change-Id: Ib022bba44e24675082299132a5965fbcb58257fa
|
|
Change verizon's ToS title to use the string 'visual voicemail'
This change seems a bit strange since the verizon legal text uses the string 'Visual Voice Mail', but the title uses 'visual voice mail'
screen shots:
https://drive.google.com/open?id=0B9o_KvtLkcuIR1lmaUF4OXk1SnFLdS1fbFpfMlFieWlTQ25v
https://drive.google.com/open?id=0B9o_KvtLkcuIRURWd0hhYjc4NUdKQ1hzM2RIcG5fSmlHcGhJ
Bug: 37340510
Test: update unit tests
PiperOrigin-RevId: 169933539
Change-Id: Idba526293604b7a27083a91b86825ef66ce23bcd
|
|
Also fixes an issue where if the promo is shown after the dialpad or search UI is brought up then the promo will be added to the bottom of those UIs.
Bug: 64491095
Test: manual
PiperOrigin-RevId: 169700496
Change-Id: I76a1aa977df623964b843d8e4b20146ba7c2f874
|
|
Test: TH
Change-Id: I48e807f3eafbc82401b2674a2610b20bf118c275
|
|
This CL partially revert cl/159492498, since data SMS cannot be properly processed under FBE and visual voicemail notification won't be received.
Bug: 65555345
Test: LegacyVoicemailNotificationReceiverTest
PiperOrigin-RevId: 169321096
Change-Id: I7134d80479efef67de8d5d44131eea30f82297a0
|
|
Bug: 65648343
Test: updated unit tests (already submitted in previous cl)
PiperOrigin-RevId: 169280819
Change-Id: I5950087765ffd038c31b872c6468951472980407
|
|
verizon TOS screen shot 1: https://drive.google.com/open?id=0B9o_KvtLkcuIU3VpLUpqcXBUYy1QY19UUk81a29sdGQyNEZZ
verizon TOS screen shot 2: https://drive.google.com/open?id=0B9o_KvtLkcuIN3R6SUFjS3RVTWhZQUM1UzhoajhNUF9ZbzJJ
non-verizon TOS screen shot: https://drive.google.com/open?id=0B9o_KvtLkcuIeVFYaWhYZmRzYVctU2F6N1VqazcycGpmNmRZ
Bug: 37340510
Test: manual and update unit test
PiperOrigin-RevId: 168851805
Change-Id: I7be27360093cae315b7249152e10d1beae5c5966
|
|
When opening a voicemail setting from Dialer with
ACTION_CONFIGURE_VOICEMAIL, no subId is passed.
So on a multi-SIM device, it is always configuration on the default
phone regardless of SIM.
To solve this, set the PhoneAccountHandle to intent extra for
ACTION_CONFIGURE_VOICEMAIL. In the advanced settings, obtains subId
from the PhoneAccountHandle.
Test: manual - Checked that correct PhoneAccountHandle will be passed
with ACTION_CONFIGURE_VOICEMAIL intent
Bug: 65001008
Author: xuegang.x.liu <xuegang.x.liu@sony.com>
Bug: 65001008
Test: manual - Checked that correct PhoneAccountHandle will be passed
PiperOrigin-RevId: 168019873
Change-Id: I8578dd2c4ac24e4af121a90b2b175baae2832461
|
|
Somehow a null action will be sent to the receiver.
Bug: 64934925
Test: LegacyVoicemailNotificationReceiveverTest
PiperOrigin-RevId: 167300542
Change-Id: Ifa001d102d265e1dad42806b48f0a1710d05b195
|
|
The TelecomManager#isInCall method returns true anytime the user is in a call.
Starting in O, the APIs include support for self-managed ConnectionServices so that other apps like Duo can tell Telecom about its calls. So, if the user is in a Duo call, isInCall would return true.
Dialer uses this to determine whether to show the "return to call in progress" when Dialer is launched.
Instead, Dialer should use TelecomManager#isInManagedCall, which only returns true if the device is in a managed call which Dialer would know about.
Bug: 36991070
Test: none
PiperOrigin-RevId: 167200903
Change-Id: I12ac7b893dcbfa2fc842ca5ab356fbbc490a098b
|
|
Previously, Android's Dialer app was developed in an internal Google
source control system and only exported to public during AOSP drops.
The Dialer team is now switching to a public development model similar
to the telephony team.
This CL represents all internal Google changes that were committed to
Dialer between the public O release and today's tip of tree on internal
master. This CL squashes those changes into a single commit.
In subsequent changes, changes will be exported on a per-commit basis.
Test: make, flash install, run
Merged-In: I45270eaa8ce732d71a1bd84b08c7fa0e99af3160
Change-Id: I529aaeb88535b9533c0ae4ef4e6c1222d4e0f1c8
PiperOrigin-RevId: 167068436
|
|
This release was created following the instructions at:
go/dialer-aosp-release
Subsequent dialer releases will follow as O bugs are
fixed, until we reach our final RC.
Version: 10
Candidate: RC39
Branch: dialer-android_release_branch/153304843.1
dialer-android_20170416.00/dialer-android_20170416.00_RC39
This release contains the following bug fixes since RC32:
Bug: 38137349 38249439 38299262 38329114
Test: make
Change-Id: I65f695db8aa20902fa60835d58b41cfdfe42704b
|
|
This release was created following the instructions at:
go/dialer-aosp-release
Subsequent dialer releases will follow as O bugs are
fixed, until we reach our final RC.
Version: 10
Candidate: RC32
Branch: dialer-android_release_branch/153304843.1
dialer-android_20170416.00/dialer-android_20170416.00_RC32
This release contains the following bug fixes since RC17:
Bug: 33176679 33272455 3646510 36773894 37297649 37413780
37513689 37640315 37680595 37698062 37873639 37901752
37919295 37953423 38062852 38069600 38137349 38173549
38180252 38191514
Test: make, on device
Change-Id: I4e4bb630082758e418ff24892b7db3142c6eb09a
|
|
This release was created following the instructions at:
go/dialer-aosp-release
Subsequent dialer releases will follow as O bugs are
fixed, until we reach our final RC.
Version: 10
Candidate: RC16
Branch: dialer-android_release_branch/153304843.1
dialer-android/dialer-android_20170416.00/dialer-android_20170416.00_RC16
This release contains the following bug fixes since RC00:
Bug: 37324705 35304403 36067503 35304446 33203808 37280992
37346084 35766990 37481880 37424493 36470282 37347691
37519015 37168472 35805360 37545472 27704934 36515614
35766990 37577470 34739750 35801628 36788693 35264204
36708536 37628370 36904650 37314436 37642171 37530847
37637799 37666625 37548549 37648036 37636412 37323529
37630507 35919141 37198343 37548572 36178218 37640315
37663896 37720467 37275944 37710497 31634477 37744796
37348506 37744796 37568534 37672424 34872683 34873026
37681461 34873295 37748373 37526812 37618638 37663896
37536088 37727455 37165687 36651204 36900708 37323529
36902926 37256480 37328353 37432034 37436952 34093562
37720889 37321935 37780300 37781115 37755902 36588206
34258266 37290464 37698062 37618638 37473004 37432034
37918676 37870494 37722091
Test: make, on device
Change-Id: I99e1a484ccd578c1f8a13e7a6a4b4952f0791297
|
|
RC00 is based on:
branch: dialer-android_release_branch/153304843.1
synced to: 153304843
following the instructions at go/dialer-aosp-release.
In this release:
* Removes final apache sources.
* Uses native lite compilation.
More drops will follow with subsequent release candidates
until we reach our final v10 release, in cadence with our
prebuilt drops.
Test: TreeHugger, on device
Change-Id: Ic9684057230f9b579c777820c746cd21bf45ec0f
|
|
cl/152373142.
Test: make, treehugger
This CL updates the AOSP Dialer source with all the changes that have
gone into the private google3 repository. This includes all the
changes from cl/151342913 (3/27/2017) to cl/152373142 (4/06/2017).
This goal of these drops is to keep the AOSP source in sync with the
internal google3 repository. Currently these sync are done by hand
with very minor modifications to the internal source code.
See the Android.mk file for list of modifications.
Our current goal is to do frequent drops (daily if possible) and
eventually switched to an automated process.
Change-Id: I2fbc88cf6867b90ac8b65f75e5e34468988c7217
|
|
cl/151342913.
Test: make, treehugger
This CL updates the AOSP Dialer source with all the changes that have
gone into the private google3 repository. This includes all the
changes from cl/151128062 (3/24/2017) to cl/151342913 (3/27/2017).
This goal of these drops is to keep the AOSP source in sync with the
internal google3 repository. Currently these sync are done by hand
with very minor modifications to the internal source code.
See the Android.mk file for list of modifications.
Our current goal is to do frequent drops (daily if possible) and
eventually switched to an automated process.
Change-Id: I8d4855628b62e9067e71f32ed40317617a1e3b02
|
|
cl/151128062
Test: make, treehugger
This CL updates the AOSP Dialer source with all the changes that have
gone into the private google3 repository. This includes all the
changes from cl/150756069 (3/21/2017) to cl/151128062 (3/24/2017).
Notable this release:
- Explicitly enumerate host and target dependencies.
- Update proguard flag references.
This goal of these drops is to keep the AOSP source in sync with the
internal google3 repository. Currently these sync are done by hand
with very minor modifications to the internal source code.
See the Android.mk file for list of modifications.
Our current goal is to do frequent drops (daily if possible) and
eventually switched to an automated process.
Bug: 33210202 36511925
Addresses
33210202 - Proguard support
36511925 - Compiler warnings when building against platform sdk
Change-Id: I448ec3b3f2358886859cf7a4ef76a8fcef3244ae
|
|
cl/150756069
Test: make, treehugger
This CL updates the AOSP Dialer source with all the changes that have
gone into the private google3 repository. This includes all the
changes from cl/150392808 (3/16/2017) to cl/150756069 (3/21/2017).
This goal of these drops is to keep the AOSP source in sync with the
internal google3 repository. Currently these sync are done by hand
with very minor modifications to the internal source code.
See the Android.mk file for list of modifications.
Our current goal is to do frequent drops (daily if possible) and
eventually switched to an automated process.
Change-Id: I0888b5db52efb28eb8194600e0c7804592f975f3
|
|
cl/150622237"
This reverts commit 06b6b56e9eaa91ebf757ea641e38a9c885fa40bd.
Change-Id: Ida8c5ee67669524dc63b9adc60a6dd392cb9b9a6
|
|
cl/150622237
Test: make, treehugger, on device testing.
This CL updates the AOSP Dialer source with all the changes that have
gone into the private google3 repository. This includes all the
changes from cl/150392808 (3/16/2017) to cl/150622237 (3/20/2017).
This goal of these drops is to keep the AOSP source in sync with the
internal google3 repository. Currently these sync are done by hand
with very minor modifications to the internal source code.
See the Android.mk file for list of modifications.
Our current goal is to do frequent drops (daily if possible) and
eventually switched to an automated process.
Change-Id: Id53e0e580a4ef73760a8afb7bb8c265ee27ad535
|
|
Test: Treehugger
Notable this release:
* Reintroduce localization.
This CL updates the AOSP Dialer source with all the changes that have
gone into the private google3 repository. This includes all the
changes from 3/15/2017 to cl/150392808 (3/16/2017).
This goal of these drops is to keep the AOSP source in sync with the
internal google3 repository. Currently these sync are done by hand
with very minor modifications to the internal source code.
See the Android.mk file for list of modifications.
Our current goal is to do frequent drops (daily if possible) and
eventually switched to an automated process.
Change-Id: Ia16d68469c2ca1ff42c7fa31d922bdb78c4e244a
|
|
This reverts commit 1019500220518fb5fb023fcb7d370ab3cbf12307.
Change-Id: Ie6e4f81a995fca7345132b596521b0bd06ceffb9
|
|
Test: Treehugger
Change-Id: If2baab1d3fc2dee602a4f784bba532182e7174f5
|
|
* Refactor voicemail component
* Add new enriched calling components
Test: treehugger, manual aosp testing
Change-Id: I521a0f86327d4b42e14d93927c7d613044ed5942
|
|
Test: Built package and system image.
This change clobbers the old source, and is an export
from an internal Google repository.
The internal repository was forked form Android in March,
and this change includes modifications since then, to
near the v8 release.
Since the fork, we've moved code from monolithic to independent modules. In addition,
we've switched to Blaze/Bazel as the build sysetm. This export, however, still uses make.
New dependencies have been added:
- Dagger
- Auto-Value
- Glide
- Libshortcutbadger
Going forward, development will still be in Google3, and the Gerrit release
will become an automated export, with the next drop happening in ~ two weeks.
Android.mk includes local modifications from ToT.
Abridged changelog:
Bug fixes
● Not able to mute, add a call when using Phone app in multiwindow mode
● Double tap on keypad triggering multiple key and tones
● Reported spam numbers not showing as spam in the call log
● Crash when user tries to block number while Phone app is not set as default
● Crash when user picks a number from search auto-complete list
Visual Voicemail (VVM) improvements
● Share Voicemail audio via standard exporting mechanisms that support file attachment
(email, MMS, etc.)
● Make phone number, email and web sites in VVM transcript clickable
● Set PIN before declining VVM Terms of Service {Carrier}
● Set client type for outbound visual voicemail SMS {Carrier}
New incoming call and incall UI on older devices
(Android M)
● Updated Phone app icon
● New incall UI (large buttons, button labels)
● New and animated Answer/Reject gestures
Accessibility
● Add custom answer/decline call buttons on answer screen for touch exploration
accessibility services
● Increase size of touch target
● Add verbal feedback when a Voicemail fails to load
● Fix pressing of Phone buttons while in a phone call using Switch Access
● Fix selecting and opening contacts in talkback mode
● Split focus for ‘Learn More’ link in caller id & spam to help distinguish similar text
Other
● Backup & Restore for App Preferences
● Prompt user to enable Wi-Fi calling if the call ends due to out of service and Wi-Fi is
connected
● Rename “Dialpad” to “Keypad”
● Show "Private number" for restricted calls
● Delete unused items (vcard, add contact, call history) from Phone menu
Change-Id: I2a7e53532a24c21bf308bf0a6d178d7ddbca4958
|