diff options
Diffstat (limited to 'rootdir/etc/init.qcom.usb.sh')
| -rw-r--r-- | rootdir/etc/init.qcom.usb.sh | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/rootdir/etc/init.qcom.usb.sh b/rootdir/etc/init.qcom.usb.sh new file mode 100644 index 0000000..caa7052 --- /dev/null +++ b/rootdir/etc/init.qcom.usb.sh @@ -0,0 +1,242 @@ +#!/vendor/bin/sh +# Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# + +# Set platform variables +soc_hwplatform=`cat /sys/devices/soc0/hw_platform 2> /dev/null` +soc_machine=`cat /sys/devices/soc0/machine 2> /dev/null` +soc_machine=${soc_machine:0:2} +soc_id=`cat /sys/devices/soc0/soc_id 2> /dev/null` + +# +# Check ESOC for external modem +# +# Note: currently only a single MDM/SDX is supported +# +esoc_name=`cat /sys/bus/esoc/devices/esoc0/esoc_name 2> /dev/null` + +target=`getprop ro.board.platform` + +if [ -f /sys/class/android_usb/f_mass_storage/lun/nofua ]; then + echo 1 > /sys/class/android_usb/f_mass_storage/lun/nofua +fi + +# +# Override USB default composition +# +# If USB persist config not set, set default configuration +if [ "$(getprop persist.vendor.usb.config)" == "" -a \ + "$(getprop init.svc.vendor.usb-gadget-hal-1-0)" != "running" ]; then + if [ "$esoc_name" != "" ]; then + setprop persist.vendor.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb + else + case "$(getprop ro.baseband)" in + "apq") + setprop persist.vendor.usb.config diag,adb + ;; + *) + case "$soc_hwplatform" in + "Dragon" | "SBC") + setprop persist.vendor.usb.config diag,adb + ;; + *) + case "$soc_machine" in + "SA") + setprop persist.vendor.usb.config diag,adb + ;; + *) + case "$target" in + "msm8996") + setprop persist.vendor.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb + ;; + "msm8909") + setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb + ;; + "msm8937") + if [ -d /config/usb_gadget ]; then + setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb + else + case "$soc_id" in + "313" | "320") + setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb + ;; + *) + setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb + ;; + esac + fi + ;; + "msm8953") + if [ -d /config/usb_gadget ]; then + setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb + else + setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb + fi + ;; + "msm8998" | "sdm660" | "apq8098_latv") + setprop persist.vendor.usb.config diag,serial_cdev,rmnet,adb + ;; + "sdm845" | "sdm710") + setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb + ;; + "msmnile" | "sm6150" | "trinket" | "lito" | "atoll" | "bengal") + setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,qdss,adb + ;; + *) + setprop persist.vendor.usb.config diag,adb + ;; + esac + ;; + esac + ;; + esac + ;; + esac + fi +fi + +# Start peripheral mode on primary USB controllers for Automotive platforms +case "$soc_machine" in + "SA") + if [ -f /sys/bus/platform/devices/a600000.ssusb/mode ]; then + default_mode=`cat /sys/bus/platform/devices/a600000.ssusb/mode` + case "$default_mode" in + "none") + echo peripheral > /sys/bus/platform/devices/a600000.ssusb/mode + ;; + esac + fi + ;; +esac + +# set rndis transport to BAM2BAM_IPA for 8920 and 8940 +if [ "$target" == "msm8937" ]; then + if [ ! -d /config/usb_gadget ]; then + case "$soc_id" in + "313" | "320") + echo BAM2BAM_IPA > /sys/class/android_usb/android0/f_rndis_qc/rndis_transports + ;; + *) + ;; + esac + fi +fi + +# check configfs is mounted or not +if [ -d /config/usb_gadget ]; then + product_string=`cat /config/usb_gadget/g1/strings/0x409/product` 2> /dev/null + if [ "product_string" == "" ]; then + # Chip-serial is used for unique MSM identification in Product string + msm_serial=`cat /sys/devices/soc0/serial_number`; + msm_serial_hex=`printf %08X $msm_serial` + machine_type=`cat /sys/devices/soc0/machine` + product_string="$machine_type-$soc_hwplatform _SN:$msm_serial_hex" + echo "$product_string" > /config/usb_gadget/g1/strings/0x409/product + fi + + # ADB requires valid iSerialNumber; if ro.serialno is missing, use dummy + serialnumber=`cat /config/usb_gadget/g1/strings/0x409/serialnumber 2> /dev/null` + if [ "$serialnumber" == "" ]; then + serialno=1234567 + echo $serialno > /config/usb_gadget/g1/strings/0x409/serialnumber + fi + setprop vendor.usb.configfs 1 +fi + +# +# Initialize RNDIS Diag option. If unset, set it to 'none'. +# +diag_extra=`getprop persist.vendor.usb.config.extra` +if [ "$diag_extra" == "" ]; then + setprop persist.vendor.usb.config.extra none +fi + +# enable rps cpus on msm8937 target +setprop vendor.usb.rps_mask 0 +case "$soc_id" in + "294" | "295" | "353" | "354") + setprop vendor.usb.rps_mask 40 + ;; +esac + +# +# Initialize UVC conifguration. +# +if [ -d /config/usb_gadget/g1/functions/uvc.0 ]; then + cd /config/usb_gadget/g1/functions/uvc.0 + + echo 3072 > streaming_maxpacket + echo 1 > streaming_maxburst + mkdir control/header/h + ln -s control/header/h control/class/fs/ + ln -s control/header/h control/class/ss + + mkdir -p streaming/uncompressed/u/360p + echo "666666\n1000000\n5000000\n" > streaming/uncompressed/u/360p/dwFrameInterval + + mkdir -p streaming/uncompressed/u/720p + echo 1280 > streaming/uncompressed/u/720p/wWidth + echo 720 > streaming/uncompressed/u/720p/wWidth + echo 29491200 > streaming/uncompressed/u/720p/dwMinBitRate + echo 29491200 > streaming/uncompressed/u/720p/dwMaxBitRate + echo 1843200 > streaming/uncompressed/u/720p/dwMaxVideoFrameBufferSize + echo 5000000 > streaming/uncompressed/u/720p/dwDefaultFrameInterval + echo "5000000\n" > streaming/uncompressed/u/720p/dwFrameInterval + + mkdir -p streaming/mjpeg/m/360p + echo "666666\n1000000\n5000000\n" > streaming/mjpeg/m/360p/dwFrameInterval + + mkdir -p streaming/mjpeg/m/720p + echo 1280 > streaming/mjpeg/m/720p/wWidth + echo 720 > streaming/mjpeg/m/720p/wWidth + echo 29491200 > streaming/mjpeg/m/720p/dwMinBitRate + echo 29491200 > streaming/mjpeg/m/720p/dwMaxBitRate + echo 1843200 > streaming/mjpeg/m/720p/dwMaxVideoFrameBufferSize + echo 5000000 > streaming/mjpeg/m/720p/dwDefaultFrameInterval + echo "5000000\n" > streaming/mjpeg/m/720p/dwFrameInterval + + echo 0x04 > /config/usb_gadget/g1/functions/uvc.0/streaming/mjpeg/m/bmaControls + + mkdir -p streaming/h264/h/960p + echo 1920 > streaming/h264/h/960p/wWidth + echo 960 > streaming/h264/h/960p/wWidth + echo 40 > streaming/h264/h/960p/bLevelIDC + echo "333667\n" > streaming/h264/h/960p/dwFrameInterval + + mkdir -p streaming/h264/h/1920p + echo "333667\n" > streaming/h264/h/1920p/dwFrameInterval + + mkdir streaming/header/h + ln -s streaming/uncompressed/u streaming/header/h + ln -s streaming/mjpeg/m streaming/header/h + ln -s streaming/h264/h streaming/header/h + ln -s streaming/header/h streaming/class/fs/ + ln -s streaming/header/h streaming/class/hs/ + ln -s streaming/header/h streaming/class/ss/ +fi |