diff options
Diffstat (limited to 'rootdir/etc/init.qcom.post_boot.sh')
| -rw-r--r-- | rootdir/etc/init.qcom.post_boot.sh | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/rootdir/etc/init.qcom.post_boot.sh b/rootdir/etc/init.qcom.post_boot.sh index c8c242f..8ea7be3 100644 --- a/rootdir/etc/init.qcom.post_boot.sh +++ b/rootdir/etc/init.qcom.post_boot.sh @@ -576,15 +576,6 @@ function enable_memory_features() fi } -function start_hbtp() -{ - # Start the Host based Touch processing but not in the power off mode. - bootmode=`getprop ro.bootmode` - if [ "charger" != $bootmode ]; then - start vendor.hbtp - fi -} - case "$target" in "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_6x" | "msm7627a" | "msm7627_surf" | \ "qsd8250_surf" | "qsd8250_ffa" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "qsd8650a_st1x") @@ -926,26 +917,6 @@ case "$target" in if [ -f /sys/devices/soc0/hw_platform ]; then hw_platform=`cat /sys/devices/soc0/hw_platform` fi - case "$soc_id" in - "239") - case "$hw_platform" in - "Surf") - case "$platform_subtype_id" in - "1" | "2") - start_hbtp - ;; - esac - ;; - "MTP") - case "$platform_subtype_id" in - "3") - start_hbtp - ;; - esac - ;; - esac - ;; - esac ;; "268" | "269" | "270" | "271") echo 10 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus @@ -1771,29 +1742,6 @@ case "$target" in case "$soc_id" in "293" | "304" | "338" | "351") - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" ) - #if this directory is present, it means that a - #1200p panel is connected to the device. - dir="/sys/bus/i2c/devices/3-0038" - if [ ! -d "$dir" ]; then - start_hbtp - fi - ;; - esac - - if [ $soc_id -eq "338" ]; then - case "$hw_platform" in - "QRD" ) - if [ $platform_subtype_id -eq "1" ]; then - start_hbtp - fi - ;; - esac - fi - #init task load, restrict wakeups to preferred cluster echo 15 > /proc/sys/kernel/sched_init_task_load @@ -1930,14 +1878,6 @@ case "$target" in esac case "$soc_id" in "349" | "350") - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" | "QRD" ) - start_hbtp - ;; - esac - for devfreq_gov in /sys/class/devfreq/qcom,mincpubw*/governor do echo "cpufreq" > $devfreq_gov @@ -2113,21 +2053,6 @@ case "$target" in # Socid 386 = Pukeena case "$soc_id" in "303" | "307" | "308" | "309" | "320" | "386" | "436") - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" ) - start_hbtp - ;; - esac - - case "$hw_platform" in - "Surf" | "RCM" ) - if [ $platform_subtype_id -ne "4" ]; then - start_hbtp - fi - ;; - esac # Apply Scheduler and Governor settings for 8917 / 8920 echo 20000000 > /proc/sys/kernel/sched_ravg_window @@ -2205,14 +2130,6 @@ case "$target" in case "$soc_id" in "294" | "295" | "313" ) - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" ) - start_hbtp - ;; - esac - # Apply Scheduler and Governor settings for 8937/8940 # HMP scheduler settings @@ -2307,14 +2224,6 @@ case "$target" in case "$soc_id" in "354" | "364" | "353" | "363" ) - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" | "QRD" ) - start_hbtp - ;; - esac - # Apply settings for sdm429/sda429/sdm439/sda439 for cpubw in /sys/class/devfreq/*qcom,mincpubw* @@ -2445,18 +2354,6 @@ case "$target" in esac ;; esac - - case "$soc_id" in - "386" | "436") - - # Start Host based Touch processing - case "$hw_platform" in - "QRD" ) - start_hbtp - ;; - esac - ;; - esac ;; esac @@ -2622,14 +2519,6 @@ case "$target" in echo 400 > $memlat/mem_latency/ratio_ceil done echo "cpufreq" > /sys/class/devfreq/soc:qcom,mincpubw/governor - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" | "QRD" ) - start_hbtp - ;; - esac - ;; esac # Start cdsprpcd only for sdm660 and disable for sdm630 and sdm636 @@ -2641,14 +2530,6 @@ case "$target" in #Apply settings for sdm630 and Tahaa case "$soc_id" in "318" | "327" | "385" ) - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" | "QRD" ) - start_hbtp - ;; - esac - # Setting b.L scheduler parameters echo 85 > /proc/sys/kernel/sched_upmigrate echo 85 > /proc/sys/kernel/sched_downmigrate @@ -2827,14 +2708,6 @@ case "$target" in case "$soc_id" in "336" | "337" | "347" | "360" | "393" ) - - # Start Host based Touch processing - case "$hw_platform" in - "MTP" | "Surf" | "RCM" | "QRD" ) - start_hbtp - ;; - esac - # Core control parameters on silver echo 0 0 0 0 1 1 > /sys/devices/system/cpu/cpu0/core_ctl/not_preferred echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus @@ -3860,19 +3733,6 @@ case "$target" in case "$soc_id" in "347" ) - - # Start Host based Touch processing - case "$hw_platform" in - "Surf" | "RCM" | "QRD" ) - start_hbtp - ;; - "MTP" ) - if [ $platform_subtype_id != 5 ]; then - start_hbtp - fi - ;; - esac - # Core control parameters on silver echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus echo 60 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres @@ -4374,25 +4234,6 @@ case "$target" in platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` fi - case "$soc_id" in - "321" | "341") - # Start Host based Touch processing - case "$hw_platform" in - "QRD" ) - case "$platform_subtype_id" in - "32") #QVR845 do nothing - ;; - *) - start_hbtp - ;; - esac - ;; - *) - start_hbtp - ;; - esac - ;; - esac # Core control parameters echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres @@ -4687,22 +4528,6 @@ case "$target" in platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` fi - case "$hw_platform" in - "MTP" | "Surf" | "RCM" ) - # Start Host based Touch processing - case "$platform_subtype_id" in - "0" | "1" | "2" | "4") - start_hbtp - ;; - esac - ;; - "HDK" ) - if [ -d /sys/kernel/hbtpsensor ] ; then - start_hbtp - fi - ;; - esac - echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled configure_memory_parameters ;; @@ -4886,22 +4711,6 @@ case "$target" in platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` fi - case "$hw_platform" in - "MTP" | "Surf" | "RCM" ) - # Start Host based Touch processing - case "$platform_subtype_id" in - "0" | "1") - start_hbtp - ;; - esac - ;; - "HDK" ) - if [ -d /sys/kernel/hbtpsensor ] ; then - start_hbtp - fi - ;; - esac - #Setting the min and max supported frequencies reg_val=`cat /sys/devices/platform/soc/780130.qfprom/qfprom0/nvmem | od -An -t d4` feature_id=$(((reg_val >> 20) & 0xFF)) @@ -5263,27 +5072,6 @@ case "$target" in platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` fi - case "$soc_id" in - "292") #msm8998 apq8098_latv - # Start Host based Touch processing - case "$hw_platform" in - "QRD") - case "$platform_subtype_id" in - "0") - start_hbtp - ;; - "16") - if [ $platform_major_version -lt 6 ]; then - start_hbtp - fi - ;; - esac - - ;; - esac - ;; - esac - echo N > /sys/module/lpm_levels/system/pwr/cpu0/ret/idle_enabled echo N > /sys/module/lpm_levels/system/pwr/cpu1/ret/idle_enabled echo N > /sys/module/lpm_levels/system/pwr/cpu2/ret/idle_enabled |