diff options
Diffstat (limited to 'overlay')
7 files changed, 678 insertions, 0 deletions
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml new file mode 100644 index 0000000..d0a76af --- /dev/null +++ b/overlay/frameworks/base/core/res/res/values/config.xml @@ -0,0 +1,487 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2009 The Android Open Source Project + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<!-- These resources are around just to allow their values to be customized + for different hardware and product builds. Do not translate. --> +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + <!-- Flag indicating whether the we should enable the automatic brightness in Settings. + Software implementation will be used if config_hardware_auto_brightness_available is not set --> + <bool name="config_automatic_brightness_available">true</bool> + + <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. + The N entries of this array define N + 1 control points as follows: + (1-based arrays) + Point 1: (0, value[1]): lux <= 0 + Point 2: (level[1], value[2]): 0 < lux <= level[1] + Point 3: (level[2], value[3]): level[2] < lux <= level[3] + ... + Point N+1: (level[N], value[N+1]): level[N] < lux + The control points must be strictly increasing. Each control point + corresponds to an entry in the brightness backlight values arrays. + For example, if LUX == level[1] (first element of the levels array) + then the brightness will be determined by value[2] (second element + of the brightness values array). + Spline interpolation is used to determine the auto-brightness + backlight values for LUX levels between these control points. + Must be overridden in platform specific overlays --> + <integer-array name="config_autoBrightnessLevels"> + <item>1</item> <!-- pitch black --> + <item>5</item> <!-- dark indoor --> + <item>10</item> <!-- twilight --> + <item>50</item> <!-- dim indoor --> + <item>100</item> <!-- home --> + <item>300</item> <!-- office --> + <item>500</item> <!-- sunrise --> + <item>1000</item> <!-- overcast --> + <item>3000</item> <!-- indirect sun --> + <item>10000</item> <!-- daylight --> + </integer-array> + + <!-- Array of output values for LCD backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + The brightness values must be between 0 and 255 and be non-decreasing. + This must be overridden in platform specific overlays --> + <integer-array name="config_autoBrightnessLcdBacklightValues"> + <item>16</item> + <item>20</item> + <item>24</item> + <item>31</item> + <item>48</item> + <item>74</item> + <item>107</item> + <item>152</item> + <item>194</item> + <item>254</item> + <item>255</item> + </integer-array> + + <!-- Screen brightness used to dim the screen when the user activity + timeout expires. May be less than the minimum allowed brightness setting + that can be set by the user. --> + <integer name="config_screenBrightnessDim">10</integer> + + <!-- Default screen brightness setting. + Must be in the range specified by minimum and maximum. --> + <integer name="config_screenBrightnessSettingDefault">128</integer> + + <!-- Minimum screen brightness setting allowed by the power manager. + The user is forbidden from setting the brightness below this level. --> + <integer name="config_screenBrightnessSettingMinimum">1</integer> + + <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used + for debouncing the light sensor. Different constants are used to debounce the light sensor + when adapting to brighter or darker environments. This parameter controls how quickly + brightness changes occur in response to an observed change in light level that exceeds the + hysteresis threshold. --> + <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer> + <integer name="config_autoBrightnessDarkeningLightDebounce">6000</integer> + + <!-- The maximum range of gamma adjustment possible using the screen + auto-brightness adjustment setting. --> + <fraction name="config_autoBrightnessAdjustmentMaxGamma">200%</fraction> + + <!-- Period of time in which to consider light samples in milliseconds. --> + <integer name="config_autoBrightnessAmbientLightHorizon">16000</integer> + + <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> + <bool name="config_unplugTurnsOnScreen">true</bool> + + <!-- Boolean indicating if restoring network selection should be skipped --> + <!-- The restoring is handled by modem if it is true--> + <bool translatable="false" name="skip_restoring_network_selection">true</bool> + + <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> + <bool name="config_cellBroadcastAppLinks">true</bool> + + <!-- MMS user agent string --> + <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string> + + <!-- MMS user agent prolfile url --> + <string name="config_mms_user_agent_profile_url" translatable="false">http://www.google.com/oha/rdf/ua-profile-kila.xml</string> + + <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> + <bool name="config_intrusiveNotificationLed">true</bool> + + <!-- List of regexpressions describing the interface (if any) that represent tetherable + USB interfaces. If the device doesn't want to support tething over USB this should + be empty. An example would be "usb.*" --> + <string-array translatable="false" name="config_tether_usb_regexs"> + <item>"usb\\d"</item> + <item>"rndis\\d"</item> + </string-array> + + <!-- List of regexpressions describing the interface (if any) that represent tetherable + Wifi interfaces. If the device doesn't want to support tethering over Wifi this + should be empty. An example would be "softap.*" --> + <string-array translatable="false" name="config_tether_wifi_regexs"> + <item>"wlan0"</item> + <item>"wigig0"</item> + </string-array> + + <!-- List of regexpressions describing the interface (if any) that represent tetherable + bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this + should be empty. --> + <string-array translatable="false" name="config_tether_bluetooth_regexs"> + <item>"bnep\\d"</item> + <item>"bt-pan"</item> + </string-array> + + <!-- Array of allowable ConnectivityManager network types for tethering --> + <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or + [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> + <integer-array translatable="false" name="config_tether_upstream_types"> + <item>1</item> + <item>0</item> + <item>5</item> + <item>7</item> + </integer-array> + + <!-- Dhcp range (min, max) to use for tethering purposes --> + <!-- USB is 192.168.42.1 and 255.255.255.0 + Wifi is 192.168.43.1 and 255.255.255.0 + BT is limited to max default of 5 connections. 192.168.44.1 to 192.168.48.1 + with 255.255.255.0 + P2P is 192.168.49.1 and 255.255.255.0 + Wigig is 192.168.50.1 and 255.255.255.0 + Wigig P2P is 192.168.51.1 and 255.255.255.0 + --> + <string-array name="config_tether_dhcp_range"> + <item>192.168.42.2</item> + <item>192.168.42.254</item> + <item>192.168.43.2</item> + <item>192.168.43.254</item> + <item>192.168.44.2</item> + <item>192.168.44.254</item> + <item>192.168.45.2</item> + <item>192.168.45.254</item> + <item>192.168.46.2</item> + <item>192.168.46.254</item> + <item>192.168.47.2</item> + <item>192.168.47.254</item> + <item>192.168.48.2</item> + <item>192.168.48.254</item> + <item>192.168.49.2</item> + <item>192.168.49.254</item> + <item>192.168.50.2</item> + <item>192.168.50.254</item> + <item>192.168.51.2</item> + <item>192.168.51.254</item> + </string-array> + + <!-- This string array should be overridden by the device to present a list of network + attributes. This is used by the connectivity manager to decide which networks can coexist + based on the hardware --> + <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], + [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> + <!-- the 5th element "resore-time" indicates the number of milliseconds to delay + before automatically restore the default connection. Set -1 if the connection + does not require auto-restore. --> + <!-- the 6th element indicates boot-time dependency-met value. --> + <string-array translatable="false" name="networkAttributes"> + <item>wifi,1,1,1,-1,true</item> + <item>mobile,0,0,0,-1,true</item> + <item>mobile_mms,2,0,4,300000,true</item> + <item>mobile_supl,3,0,2,300000,true</item> + <item>mobile_dun,4,0,2,300000,true</item> + <item>mobile_hipri,5,0,3,300000,true</item> + <item>mobile_fota,10,0,2,300000,true</item> + <item>mobile_ims,11,0,2,300000,true</item> + <item>mobile_cbs,12,0,2,300000,true</item> + <item>bluetooth,7,7,2,-1,true</item> + <item>ethernet,9,9,4,-1,true</item> + </string-array> + + <!-- This string array should be overridden by the device to present a list of radio + attributes. This is used by the connectivity manager to decide which networks can coexist + based on the hardware --> + <!-- An Array of "[ConnectivityManager connectionType], + [# simultaneous connection types]" --> + <string-array translatable="false" name="radioAttributes"> + <item>"1,1"</item> + <item>"0,1"</item> + <item>"7,1"</item> + <item>"9,1"</item> + </string-array> + + <!-- Whether WiFi display is supported by this device. + There are many prerequisites for this feature to work correctly. + Here are a few of them: + * The WiFi radio must support WiFi P2P. + * The WiFi radio must support concurrent connections to the WiFi display and + to an access point. + * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix" + remote submix module. This module is used to record and stream system + audio output to the WiFi display encoder in the media server. + * The remote submix module "audio.r_submix.default" must be installed on the device. + * The device must be provisioned with HDCP keys (for protected content). + --> + <bool name="config_enableWifiDisplay">true</bool> + + <!-- Set to true if the wifi display supports compositing content stored + in gralloc protected buffers. For this to be true, there must exist + a protected hardware path for surface flinger to composite and send + protected buffers to the wifi display video encoder. + If this flag is false, we advise applications not to use protected + buffers (if possible) when presenting content to a wifi display because + the content may be blanked. + This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS} + flag is set for wifi displays. + --> + <bool name="config_wifiDisplaySupportsProtectedBuffers">true</bool> + + <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> + <bool translatable="false" name="config_wifi_dual_band_support">true</bool> + + <!-- Boolean indicating whether the wifi chipset has background scan support --> + <bool translatable="false" name="config_wifi_background_scan_support">true</bool> + + <!-- Wifi driver supports batched scan --> + <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool> + + <!-- When true use the linux /dev/input/event subsystem to detect the switch changes + on the headphone/microphone jack. When false use the older uevent framework. --> + <bool name="config_useDevInputEventForAudioJack">true</bool> + + <!-- Indicate whether closing the lid causes the device to go to sleep and opening + it causes the device to wake up. + The default is false. --> + <bool name="config_lidControlsSleep">true</bool> + + <!-- Enables or disables fading edges when marquee is enabled in TextView. + Off by default, since the framebuffer readback used to implement the + fading edges is prohibitively expensive on most GPUs. --> + <bool name="config_ui_enableFadingMarquee">false</bool> + + <!-- ComponentName of a dream to show whenever the system would otherwise have + gone to sleep. When the PowerManager is asked to go to sleep, it will instead + try to start this dream if possible. The dream should typically call startDozing() + to put the display into a low power state and allow the application processor + to be suspended. When the dream ends, the system will go to sleep as usual. + Specify the component name or an empty string if none. + + Note that doze dreams are not subject to the same start conditions as ordinary dreams. + Doze dreams will run whenever the power manager is in a dozing state. --> + <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> + + <!-- If true, the doze component is not started until after the screen has been + turned off and the screen off animation has been performed. --> + <bool name="config_dozeAfterScreenOffByDefault">true</bool> + + <!-- Power Management: Specifies whether to decouple the auto-suspend state of the + device from the display on/off state. + + When false, autosuspend_disable() will be called before the display is turned on + and autosuspend_enable() will be called after the display is turned off. + This mode provides best compatibility for devices using legacy power management + features such as early suspend / late resume. + + When true, autosuspend_display() and autosuspend_enable() will be called + independently of whether the display is being turned on or off. This mode + enables the power manager to suspend the application processor while the + display is on. + + This resource should be set to "true" when a doze component has been specified + to maximize power savings but not all devices support it. + + Refer to autosuspend.h for details. + --> + <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">false</bool> + + <!-- Power Management: Specifies whether to decouple the interactive state of the + device from the display on/off state. + + When false, setInteractive(..., true) will be called before the display is turned on + and setInteractive(..., false) will be called after the display is turned off. + This mode provides best compatibility for devices that expect the interactive + state to be tied to the display state. + + When true, setInteractive(...) will be called independently of whether the display + is being turned on or off. This mode enables the power manager to reduce + clocks and disable the touch controller while the display is on. + + This resource should be set to "true" when a doze component has been specified + to maximize power savings but not all devices support it. + + Refer to power.h for details. + --> + <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> + + <!-- Screen brightness used to dim the screen while dozing in a very low power state. + May be less than the minimum allowed brightness setting + that can be set by the user. --> + <integer name="config_screenBrightnessDoze">17</integer> + + <!-- Whether device supports double tap to wake --> + <bool name="config_supportDoubleTapWake">true</bool> + + <!-- Configure mobile tcp buffer sizes in the form: + rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max + If no value is found for the rat-name in use, the system default will be applied. + --> + <string-array name="config_mobile_tcp_buffers"> + <item>umts:131072,262144,1452032,4096,16384,399360</item> + <item>hspa:131072,262144,2441216,4096,16384,399360</item> + <item>hsupa:131072,262144,2441216,4096,16384,399360</item> + <item>hsdpa:131072,262144,2441216,4096,16384,399360</item> + <item>hspap:131072,262144,2441216,4096,16384,399360</item> + <item>edge:16384,32768,131072,4096,16384,65536</item> + <item>gprs:4096,8192,24576,4096,8192,24576</item> + <item>1xrtt:16384,32768,131070,4096,16384,102400</item> + <item>evdo:131072,262144,1048576,4096,16384,524288</item> + <item>lte:524288,1048576,8388608,262144,524288,4194304</item> + </string-array> + + <!-- Configure wifi tcp buffersizes in the form: + rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max --> + <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string> + + <!-- Flag specifying whether VoLTE is available on device --> + <bool name="config_device_volte_available">true</bool> + + <!-- Flag specifying whether VoLTE should be available for carrier: independent of + carrier provisioning. If false: hard disabled. If true: then depends on carrier + provisioning, availability etc --> + <bool name="config_carrier_volte_available">true</bool> + + <!-- Flag specifying whether WFC over IMS is available on device --> + <bool name="config_device_wfc_ims_available">true</bool> + + <!-- Flag specifying whether WFC over IMS should be available for carrier: independent of + carrier provisioning. If false: hard disabled. If true: then depends on carrier + provisioning, availability etc --> + <bool name="config_carrier_wfc_ims_available">true</bool> + + <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true --> + <string name="config_ims_package">org.codeaurora.ims</string> + + <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically --> + <bool name="config_dynamic_bind_ims">true</bool> + + <!-- Config determines whether to update phone object when voice registration + state changes. Voice radio tech change will always trigger an update of + phone object irrespective of this config --> + <bool name="config_switch_phone_on_voice_reg_state_change">false</bool> + + <!-- Boolean indicating if current platform supports BLE peripheral mode --> + <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool> + + <!-- Is the device capable of hot swapping an ICC Card --> + <bool name="config_hotswapCapable">true</bool> + + <!-- If true, the screen can be rotated via the accelerometer in all 4 + rotations as the default behavior. --> + <bool name="config_allowAllRotations">true</bool> + + <!-- Integer parameters of the wifi to cellular handover feature + wifi should not stick to bad networks --> + <integer name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-100</integer> + <integer name="config_wifi_framework_wifi_score_low_rssi_threshold_5GHz">-100</integer> + <integer name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-100</integer> + <integer name="config_wifi_framework_wifi_score_low_rssi_threshold_24GHz">-100</integer> + + <!-- Flag indicating if the speed up audio on mt call code should be executed --> + <bool name="config_speed_up_audio_on_mt_calls">true</bool> + + <!-- Vibrator pattern for feedback about a long screen/key press --> + <integer-array name="config_longPressVibePattern"> + <item>0</item> + <item>28</item> + <item>10</item> + </integer-array> + + <!-- Vibrator pattern for feedback about touching a virtual key --> + <integer-array name="config_virtualKeyVibePattern"> + <item>0</item> + <item>28</item> + <item>8</item> + </integer-array> + + <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> + <integer-array name="config_keyboardTapVibePattern"> + <item>28</item> + </integer-array> + + <!-- Control the behavior when the user long presses the home button. + 0 - Nothing + 1 - Menu key + 2 - Recent apps view in SystemUI + 3 - Launch assist intent + 4 - Voice Search + 5 - In-app Search + This needs to match the constants in + policy/src/com/android/internal/policy/impl/PhoneWindowManager.java + --> + <integer name="config_longPressOnHomeBehavior">3</integer> + + <!-- Operating volatage for bluetooth controller. 0 by default--> + <integer name="config_bluetooth_operating_voltage_mv">3300</integer> + + <!-- Enable overlay for all location components. --> + <string name="config_networkLocationProviderPackageName" translatable="false">com.qualcomm.location</string> + <string name="config_fusedLocationProviderPackageName" translatable="false">com.qualcomm.location</string> + + <!-- Define Google play service package for FRP--> + <string name="config_persistentDataPackageName" translatable="false">com.google.android.gms</string> + + <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently + in hardware. --> + <bool name="config_setColorTransformAccelerated">true</bool> + + <!-- Default list of files pinned by the Pinner Service --> + <string-array translatable="false" name="config_defaultPinnerServiceFiles"> + <item>"/system/framework/arm64/boot-framework.oat"</item> + <item>"/system/framework/boot-framework.vdex"</item> + <item>"/system/framework/oat/arm64/services.odex"</item> + <item>"/system/framework/oat/arm64/services.vdex"</item> + <item>"/system/framework/arm64/boot.oat"</item> + <item>"/system/framework/boot.vdex"</item> + <item>"/system/framework/arm64/boot-core-libart.oat"</item> + <item>"/system/framework/boot-core-libart.vdex"</item> + </string-array> + + <!-- True if camera app should be pinned via Pinner Service --> + <bool name="config_pinnerCameraApp">true</bool> + + <!-- Default value for led color when battery is low on charge --> + <integer name="config_notificationsBatteryLowARGB">0xFFFFFFFF</integer> + + <!-- Default value for led color when battery is medium charged --> + <integer name="config_notificationsBatteryMediumARGB">0xFFFFFFFF</integer> + + <!-- Default value for led color when battery is fully charged --> + <integer name="config_notificationsBatteryFullARGB">0xFFFFFFFF</integer> + + <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be + autodetected from the Configuration. --> + <bool name="config_showNavigationBar">true</bool> + + <!-- Whether or not swipe up gesture's opt-in setting is available on this device --> + <bool name="config_swipe_up_gesture_setting_available">true</bool> + + <!-- Enable ACS (auto channel selection) for Wifi hotspot (SAP) --> + <bool translatable="false" name="config_wifi_softap_acs_supported">true</bool> + + <!-- Enable 802.11ac for Wifi hotspot (SAP) --> + <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool> + + <!-- Number of physical SIM slots on the device. This includes both eSIM and pSIM slots, and + is not necessarily the same as the number of phones/logical modems supported by the device. + For example, a multi-sim device can have 2 phones/logical modems, but 3 physical slots, + or a single SIM device can have 1 phones/logical modems, but 2 physical slots (one eSIM + and one pSIM) --> + <integer name="config_num_physical_slots">2</integer> +</resources> diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml new file mode 100644 index 0000000..8a673f9 --- /dev/null +++ b/overlay/frameworks/base/core/res/res/xml/power_profile.xml @@ -0,0 +1,58 @@ +<?xml version="1.0" encoding="utf-8"?> +<device name="Android"> + <item name="none">0</item> + <item name="screen.on">88</item> + <item name="screen.full">300</item> + <array name="cpu.clusters.cores"> + <value>4</value> + <value>4</value> + </array> + <array name="cpu.core_speeds.cluster0"> + <value>633600</value> + <value>902400</value> + <value>1113600</value> + <value>1401600</value> + <value>1536000</value> + <value>1612800</value> + </array> + <array name="cpu.core_power.cluster0"> + <value>11</value> + <value>18</value> + <value>34</value> + <value>45</value> + <value>52</value> + <value>56</value> + </array> + <array name="cpu.core_speeds.cluster1"> + <value>1113600</value> + <value>1401600</value> + <value>1747200</value> + <value>1804800</value> + </array> + <array name="cpu.core_power.cluster1"> + <value>75</value> + <value>108</value> + <value>170</value> + <value>193</value> + </array> + <item name="cpu.awake">4</item> + <item name="cpu.idle">3</item> + <item name="battery.capacity">3010</item> + <item name="bluetooth.active">80</item> + <item name="bluetooth.at">2</item> + <item name="bluetooth.on">2</item> + <item name="wifi.on">2</item> + <item name="wifi.active">175</item> + <item name="wifi.scan">180</item> + <item name="dsp.audio">45</item> + <item name="dsp.video">60</item> + <item name="camera.flashlight">200</item> + <item name="camera.avg">550</item> + <item name="gps.on">100</item> + <item name="radio.active">140</item> + <item name="radio.scanning">45</item> + <array name="radio.on"> + <value>8</value> + <value>6</value> + </array> +</device> diff --git a/overlay/frameworks/base/packages/SettingsProvider/res/values/defaults.xml b/overlay/frameworks/base/packages/SettingsProvider/res/values/defaults.xml new file mode 100644 index 0000000..bf10c07 --- /dev/null +++ b/overlay/frameworks/base/packages/SettingsProvider/res/values/defaults.xml @@ -0,0 +1,24 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/** + * Copyright (c) 2015, The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +--> +<resources> + + <!-- Set the automatic brightness mode on by default --> + <bool name="def_screen_brightness_automatic_mode">true</bool> + +</resources> diff --git a/overlay/packages/apps/Settings/res/values/arrays.xml b/overlay/packages/apps/Settings/res/values/arrays.xml new file mode 100644 index 0000000..3a00a89 --- /dev/null +++ b/overlay/packages/apps/Settings/res/values/arrays.xml @@ -0,0 +1,30 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/* +** +** Copyright 2015 The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License"); +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + + <!-- IDs for each color mode. The values must match the corresponding constants in + android.view.Display --> + <integer-array name="color_mode_ids"> + <item>0</item> + <item>-1</item> + <item>-1</item> + </integer-array> + +</resources> diff --git a/overlay/packages/apps/Snap/res/values/config.xml b/overlay/packages/apps/Snap/res/values/config.xml new file mode 100644 index 0000000..30ee617 --- /dev/null +++ b/overlay/packages/apps/Snap/res/values/config.xml @@ -0,0 +1,25 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2018 The LineageOS Project + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<!-- Camera app resources that may need to be customized + for different hardware or product builds. --> +<resources> + <!-- Enable support for camera api v2 --> + <bool name="support_camera_api_v2">true</bool> + + <!-- Opens back camera using openLegacy() and forces api v1 --> + <bool name="back_camera_open_legacy">false</bool> + + <!-- Opens front camera using openLegacy() and forces api v1 --> + <bool name="front_camera_open_legacy">false</bool> +</resources> diff --git a/overlay/packages/services/Telecomm/res/values/config.xml b/overlay/packages/services/Telecomm/res/values/config.xml new file mode 100644 index 0000000..49efa9c --- /dev/null +++ b/overlay/packages/services/Telecomm/res/values/config.xml @@ -0,0 +1,24 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2015 The Android Open Source Project + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<!-- Telecomm resources that may need to be customized + for different hardware or product builds. --> +<resources> + + <!-- Flag indicating if the tty is enabled --> + <bool name="tty_enabled">true</bool> + +</resources> diff --git a/overlay/packages/services/Telephony/res/values/config.xml b/overlay/packages/services/Telephony/res/values/config.xml new file mode 100644 index 0000000..bca0057 --- /dev/null +++ b/overlay/packages/services/Telephony/res/values/config.xml @@ -0,0 +1,30 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- Copyright (C) 2009 The Android Open Source Project + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<!-- NOTE: Many variables that used to be in this file have been migrated to + CarrierConfigManager.java. Please consider whether new variables belong + there before adding to this file. Variables here should be more closely + related to devices than to networks. --> + +<!-- Phone app resources that may need to be customized + for different hardware or product builds. --> +<resources> + <!-- Flag indicating if hac is enabled --> + <bool name="hac_enabled">true</bool> + + <!-- Show enabled lte option for lte device --> + <bool name="config_enabled_lte" translatable="false">true</bool> +</resources> |