diff options
Diffstat (limited to 'gps/etc')
| -rw-r--r-- | gps/etc/Android.mk | 21 | ||||
| -rw-r--r-- | gps/etc/flp.conf | 60 | ||||
| -rw-r--r-- | gps/etc/gps.conf | 299 |
3 files changed, 380 insertions, 0 deletions
diff --git a/gps/etc/Android.mk b/gps/etc/Android.mk new file mode 100644 index 0000000..22ca2f7 --- /dev/null +++ b/gps/etc/Android.mk @@ -0,0 +1,21 @@ + +LOCAL_PATH := $(call my-dir) + +include $(CLEAR_VARS) +LOCAL_MODULE := gps.conf +LOCAL_VENDOR_MODULE := true +LOCAL_MODULE_TAGS := optional +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := gps.conf +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := flp.conf +LOCAL_VENDOR_MODULE := true +LOCAL_MODULE_TAGS := optional +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := flp.conf +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC) +include $(BUILD_PREBUILT) + diff --git a/gps/etc/flp.conf b/gps/etc/flp.conf new file mode 100644 index 0000000..65d54d3 --- /dev/null +++ b/gps/etc/flp.conf @@ -0,0 +1,60 @@ +################################### +##### FLP settings ##### +################################### + +################################### +# FLP BATCH SIZE +################################### +# The number of batched locations +# requested to modem. The desired number +# defined below may not be satisfied, as +# the modem can only return the number +# of batched locations that can be allocated, +# which is limited by memory. The default +# batch size defined as 20 as below. +BATCH_SIZE=20 + +################################### +# FLP OUTDOOR TRIP BATCH SIZE +################################### +# The number of batched locations +# requested to modem for outdoor +# trip batching. The desired number +# defined below may not be satisfied, as +# the modem can only return the number +# of batched locations that can be allocated, +# which is limited by memory. The default +# trip batch size defined as 600 as below. +OUTDOOR_TRIP_BATCH_SIZE=600 + +################################### +# FLP BATCHING SESSION TIMEOUT +################################### +# Duration with which batch session timeout +# happens in milliseconds. If not specified +# or set to zero, batching session timeout +# defaults to 20 seconds by the modem. +# BATCH_SESSION_TIMEOUT=20000 + +################################### +# FLP BATCHING ACCURACY +################################### +# Set to one of the defined values below +# to define the accuracy of batching. +# If not specified, accuracy defaults +# to LOW. +# FLP BATCHING ACCURACY values: +# Low accuracy = 0 +# Medium accuracy = 1 +# High accuracy = 2 +ACCURACY=1 + +#################################### +# By default if network fixes are not sensor assisted +# these fixes must be dropped. This parameter adds an exception +# for targets where there is no PDR and we still want to +# report out network fixes +# 0: MUST NOT ALLOW NETWORK FIXES +# 1: ALLOW NETWORK FIXES +#################################### +ALLOW_NETWORK_FIXES = 0 diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf new file mode 100644 index 0000000..fc37653 --- /dev/null +++ b/gps/etc/gps.conf @@ -0,0 +1,299 @@ +#Version check for XTRA +#DISABLE = 0 +#AUTO = 1 +#XTRA2 = 2 +#XTRA3 = 3 +XTRA_VERSION_CHECK=0 + +# Error Estimate +# _SET = 1 +# _CLEAR = 0 +ERR_ESTIMATE=0 + +#NTP server +NTP_SERVER=time.izatcloud.net + +#XTRA CA path +XTRA_CA_PATH=/usr/lib/ssl/certs + +# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info +# 4 - Debug, 5 - Verbose +# If DEBUG_LEVEL is commented, Android's logging levels will be used +DEBUG_LEVEL = 3 + +# Intermediate position report, 1=enable, 0=disable +INTERMEDIATE_POS=0 + +# supl version 1.0 +SUPL_VER=0x10000 + +# Emergency SUPL, 1=enable, 0=disable +#SUPL_ES=1 + +#Choose PDN for Emergency SUPL +#1 - Use emergency PDN +#0 - Use regular SUPL PDN for Emergency SUPL +#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 + +#SUPL_MODE is a bit mask set in config.xml per carrier by default. +#If it is uncommented here, this value will overwrite the value from +#config.xml. +#MSA=0X2 +#MSB=0X1 +#SUPL_MODE= + +# GPS Capabilities bit mask +# SCHEDULING = 0x01 +# MSB = 0x02 +# MSA = 0x04 +# ON_DEMAND_TIME = 0x10 +# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING +CAPABILITIES=0x17 + +# Accuracy threshold for intermediate positions +# less accurate positions are ignored, 0 for passing all positions +# ACCURACY_THRES=5000 + +################################ +##### AGPS server settings ##### +################################ + +# FOR SUPL SUPPORT, set the following +# SUPL_HOST=supl.host.com or IP +# SUPL_PORT=1234 + +# FOR MO SUPL SUPPORT, set the following +# MO_SUPL_HOST=supl.host.com or IP +# MO_SUPL_PORT=1234 + +# FOR C2K PDE SUPPORT, set the following +# C2K_HOST=c2k.pde.com or IP +# C2K_PORT=1234 + +# Bitmask of slots that are available +# for write/install to, where 1s indicate writable, +# and the default value is 0 where no slots +# are writable. For example, AGPS_CERT_WRITABLE_MASK +# of b1000001010 makes 3 slots available +# and the remaining 7 slots unwritable. +#AGPS_CERT_WRITABLE_MASK=0 + +#################################### +# LTE Positioning Profile Settings +#################################### +# 0: Enable RRLP on LTE(Default) +# 1: Enable LPP_User_Plane on LTE +# 2: Enable LPP_Control_Plane +# 3: Enable both LPP_User_Plane and LPP_Control_Plane +LPP_PROFILE = 2 + +#################################### +#Datum Type +#################################### +# 0: WGS-84 +# 1: PZ-90 +DATUM_TYPE = 0 + +################################ +# EXTRA SETTINGS +################################ +# NMEA provider (1=Modem Processor, 0=Application Processor) +NMEA_PROVIDER=0 +# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) +SGLTE_TARGET=0 + +################################################## +# Select Positioning Protocol on A-GLONASS system +################################################## +# 0x1: RRC CPlane +# 0x2: RRLP UPlane +# 0x4: LLP Uplane +A_GLONASS_POS_PROTOCOL_SELECT = 0 + +################################################## +# Select technology for LPPe Control Plane +################################################## +# 0x1: DBH for LPPe CP +# 0x2: WLAN AP Measurements for LPPe CP +# 0x4: SRN AP measurement for CP +# 0x8: Sensor Barometer Measurement LPPe CP +#LPPE_CP_TECHNOLOGY = 0 + +################################################## +# Select technology for LPPe User Plane +################################################## +# 0x1: DBH for LPPe UP +# 0x2: WLAN AP Measurements for LPPe UP +# 0x4: SRN AP measurement for UP +# 0x8: Sensor Barometer Measurement LPPe UP +#LPPE_UP_TECHNOLOGY = 0 + +################################################## +# AGPS_CONFIG_INJECT +################################################## +# enable/disable injection of AGPS configurations: +# SUPL_VER +# SUPL_HOST +# SUPL_PORT +# MO_SUPL_HOST +# MO_SUPL_PORT +# C2K_HOST +# C2K_PORT +# LPP_PROFILE +# A_GLONASS_POS_PROTOCOL_SELECT +# 0: disable +# 1: enable +AGPS_CONFIG_INJECT = 1 + +################################################## +# GNSS settings for automotive use cases +# Configurations in following section are +# specific to automotive use cases, others +# please do not change, keep the default values +################################################## + +# AP Coarse Timestamp Uncertainty +################################################## +# default : 10 +# AP time stamp uncertainty, until GNSS receiver +# is able to acquire better timing information +AP_TIMESTAMP_UNCERTAINTY = 10 + +################################################## +# QDR engine availability status +################################################## +# 0 : NO QDR (default) +# 1 : QDR enabled +# This settings enables QDR Configuration for +# automotive use case, if enabled then +# DR_AP_Service needs to be enabled in izat.conf +#EXTERNAL_DR_ENABLED = 0 + +##################################### +# DR_SYNC Pulse Availability +##################################### +# 0 : DR_SYNC pulse not available (default) +# 1 : DR_SYNC pulse available +# This configuration enables the driver to make use +# of PPS events generated by DR_SYNC pulse +# Standard Linux PPS driver needs to be enabled +DR_SYNC_ENABLED = 0 + +##################################### +# PPS Device name +##################################### +PPS_DEVICENAME = /dev/pps0 + +##################################### +# Ignore PPS at Startup and after long outage +##################################### +IGNORE_PPS_PULSE_COUNT = 1 + +##################################### +# Long GNSS RF outage in seconds +##################################### +GNSS_OUTAGE_DURATION = 10 + +##################################### +# AP Clock Accuracy +##################################### +# Quality of APPS processor clock (in PPM). +# Value specified is used for calculation of +# APPS time stamp uncertainty +AP_CLOCK_PPM = 100 + +##################################### +# MAX ms difference to detect missing pulse +##################################### +# Specifies time threshold in ms to validate any missing PPS pulses +MISSING_PULSE_TIME_DELTA = 900 + +##################################### +# Propagation time uncertainty +##################################### +# This settings enables time uncertainty propagation +# logic incase of missing PPS pulse +PROPAGATION_TIME_UNCERTAINTY = 1 + +####################################### +# APN / IP Type Configuration +# APN and IP Type to use for setting +# up WWAN call. +# Use below values for IP Type: +# v4 = 4 +# v6 = 6 +# v4v6 = 10 +####################################### +# INTERNET_APN = abc.xyz +# INTERNET_IP_TYPE = 4 +# SUPL_APN = abc.xyz +# SUPL_IP_TYPE = 4 + +##################################### +# Modem type +##################################### +# This setting configures modem type +# (external=0 or internal=1) +# comment out the next line to vote +# for the first modem in the list +MODEM_TYPE = 1 + +################################################## +# CONSTRAINED TIME UNCERTAINTY MODE +################################################## +# 0 : disabled (default) +# 1 : enabled +# This setting enables GPS engine to keep its time +# uncertainty below the specified constraint +#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0 + +# If constrained time uncertainty mode is enabled, +# this setting specifies the time uncertainty +# threshold that gps engine need to maintain. +# In unit of milli-seconds. +# Default is 0.0 meaning that modem default value +# of time uncertainty threshold will be used. +#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0 + +# If constrained time uncertainty mode is enabled, +# this setting specifies the power budget that +# gps engine is allowed to spend to maintain the time +# uncertainty. +# Default is 0 meaning that GPS engine is not constained +# by power budget and can spend as much power as needed. +# In unit of 0.1 milli watt second. +#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0 + +################################################## +# POSITION ASSISTED CLOCK ESTIMATOR +################################################## +# 0 : disabled (default) +# 1 : enabled +# This setting enables GPS engine to estimate clock +# bias and drift when the signal from at least 1 +# SV is available and the UE’s position is known by +# other position engines. +#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0 + +##################################### +# proxyAppPackageName +##################################### +# This is a string that is sent to the framework +# in nfwNotifyCb callback +PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation + +##################################### +# CP_MTLR_ES +##################################### +# CP MTLR ES, 1=enable, 0=disable +CP_MTLR_ES=0 + +################################################## +# GNSS_DEPLOYMENT +################################################## +# 0 : Enable QTI GNSS (default) +# 1 : Enable QCSR SS5 +# This setting use to select between QTI GNSS +# and QCSR SS5 hardware receiver. +# By default QTI GNSS receiver is enabled. +# GNSS_DEPLOYMENT = 0 |