diff options
Diffstat (limited to 'gps/etc')
| -rw-r--r-- | gps/etc/Android.mk | 12 | ||||
| -rw-r--r-- | gps/etc/gps.conf | 207 |
2 files changed, 219 insertions, 0 deletions
diff --git a/gps/etc/Android.mk b/gps/etc/Android.mk new file mode 100644 index 0000000..d9eb0e1 --- /dev/null +++ b/gps/etc/Android.mk @@ -0,0 +1,12 @@ + +LOCAL_PATH := $(call my-dir) +include $(CLEAR_VARS) + +LOCAL_MODULE := gps.conf +LOCAL_MODULE_TAGS := optional +LOCAL_MODULE_CLASS := ETC +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/ +LOCAL_SRC_FILES := gps.conf + +include $(BUILD_PREBUILT) + diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf new file mode 100644 index 0000000..1027d76 --- /dev/null +++ b/gps/etc/gps.conf @@ -0,0 +1,207 @@ +#Uncommenting these urls would only enable +#the power up auto injection and force injection(test case). +#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin +#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin +#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin + +#Version check for XTRA +#DISABLE = 0 +#AUTO = 1 +#XTRA2 = 2 +#XTRA3 = 3 +XTRA_VERSION_CHECK=0 + +# Error Estimate +# _SET = 1 +# _CLEAR = 0 +ERR_ESTIMATE=0 + +#NTP server +NTP_SERVER=time.izatcloud.net + +#XTRA CA path +XTRA_CA_PATH=/system/etc/security/cacerts + +# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info +# 4 - Debug, 5 - Verbose +# If DEBUG_LEVEL is commented, Android's logging levels will be used +DEBUG_LEVEL = 3 + +# Intermediate position report, 1=enable, 0=disable +INTERMEDIATE_POS=0 + +# Below bit mask configures how GPS functionalities +# should be locked when user turns off GPS on Settings +# Set bit 0x1 if MO GPS functionalities are to be locked +# Set bit 0x2 if NI GPS functionalities are to be locked +# default - non is locked for backward compatibility +#GPS_LOCK = 0 + +# supl version 1.0 +SUPL_VER=0x10000 + +# Emergency SUPL, 1=enable, 0=disable +#SUPL_ES=0 + +#Choose PDN for Emergency SUPL +#1 - Use emergency PDN +#0 - Use regular SUPL PDN for Emergency SUPL +#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 + +#SUPL_MODE is a bit mask set in config.xml per carrier by default. +#If it is uncommented here, this value will overwrite the value from +#config.xml. +#MSA=0X2 +#MSB=0X1 +#SUPL_MODE= + +# GPS Capabilities bit mask +# SCHEDULING = 0x01 +# MSB = 0x02 +# MSA = 0x04 +# ON_DEMAND_TIME = 0x10 +# GEOFENCE = 0x20 +# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE +CAPABILITIES=0x37 + +# Accuracy threshold for intermediate positions +# less accurate positions are ignored, 0 for passing all positions +# ACCURACY_THRES=5000 + +################################ +##### AGPS server settings ##### +################################ + +# FOR SUPL SUPPORT, set the following +# SUPL_HOST=supl.host.com or IP +# SUPL_PORT=1234 + +# FOR C2K PDE SUPPORT, set the following +# C2K_HOST=c2k.pde.com or IP +# C2K_PORT=1234 + +# Bitmask of slots that are available +# for write/install to, where 1s indicate writable, +# and the default value is 0 where no slots +# are writable. For example, AGPS_CERT_WRITABLE_MASK +# of b1000001010 makes 3 slots available +# and the remaining 7 slots unwritable. +#AGPS_CERT_WRITABLE_MASK=0 + +#################################### +# LTE Positioning Profile Settings +#################################### +# 0: Enable RRLP on LTE(Default) +# 1: Enable LPP_User_Plane on LTE +# 2: Enable LPP_Control_Plane +# 3: Enable both LPP_User_Plane and LPP_Control_Plane +LPP_PROFILE = 2 + +################################ +# EXTRA SETTINGS +################################ +# NMEA provider (1=Modem Processor, 0=Application Processor) +NMEA_PROVIDER=0 +# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) +SGLTE_TARGET=0 + +################################################## +# Select Positioning Protocol on A-GLONASS system +################################################## +# 0x1: RRC CPlane +# 0x2: RRLP UPlane +# 0x4: LLP Uplane +A_GLONASS_POS_PROTOCOL_SELECT = 0 + +################################################## +# Select technology for LPPe Control Plane +################################################## +# 0x1: DBH for LPPe CP +# 0x2: WLAN AP Measurements for LPPe CP +# 0x4: SRN AP measurement for CP +# 0x8: Sensor Barometer Measurement LPPe CP +LPPE_CP_TECHNOLOGY = 0 + +################################################## +# Select technology for LPPe User Plane +################################################## +# 0x1: DBH for LPPe UP +# 0x2: WLAN AP Measurements for LPPe UP +# 0x4: SRN AP measurement for UP +# 0x8: Sensor Barometer Measurement LPPe UP +LPPE_UP_TECHNOLOGY = 0 + +################################################## +# AGPS_CONFIG_INJECT +################################################## +# enable/disable injection of AGPS configurations: +# SUPL_VER +# SUPL_HOST +# SUPL_PORT +# C2K_HOST +# C2K_PORT +# LPP_PROFILE +# A_GLONASS_POS_PROTOCOL_SELECT +# 0: disable +# 1: enable +AGPS_CONFIG_INJECT = 1 + +################################################## +# GNSS settings for automotive use cases +# Configurations in following section are +# specific to automotive use cases, others +# please do not change, keep the default values +################################################## + +# AP Coarse Timestamp Uncertainty +################################################## +# default : 10 +# AP time stamp uncertainty, until GNSS receiver +# is able to acquire better timing information +AP_TIMESTAMP_UNCERTAINTY = 10 + +################################################## +# QDR engine availability status +################################################## +# 0 : NO QDR (default) +# 1 : QDR enabled +# This settings enables QDR Configuration for +# automotive use case, if enabled then +# DR_AP_Service needs to be enabled in izat.conf +#EXTERNAL_DR_ENABLED = 0 + +##################################### +# DR_SYNC Pulse Availability +##################################### +# 0 : DR_SYNC pulse not available (default) +# 1 : DR_SYNC pulse available +# This configuration enables the driver to make use +# of PPS events generated by DR_SYNC pulse +# Standard Linux PPS driver needs to be enabled +DR_SYNC_ENABLED = 0 + +##################################### +# PPS Device name +##################################### +PPS_DEVICENAME = /dev/pps0 + +##################################### +# AP Clock Accuracy +##################################### +# Quality of APPS processor clock (in PPM). +# Value specified is used for calculation of +# APPS time stamp uncertainty +AP_CLOCK_PPM = 100 + +##################################### +# MAX ms difference to detect missing pulse +##################################### +# Specifies time threshold in ms to validate any missing PPS pulses +MISSING_PULSE_TIME_DELTA = 900 + +##################################### +# Propagation time uncertainty +##################################### +# This settings enables time uncertainty propagation +# logic incase of missing PPS pulse +PROPAGATION_TIME_UNCERTAINTY = 1 |