diff options
Diffstat (limited to 'gps/etc/izat.conf')
| -rw-r--r-- | gps/etc/izat.conf | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/gps/etc/izat.conf b/gps/etc/izat.conf new file mode 100644 index 0000000..678228c --- /dev/null +++ b/gps/etc/izat.conf @@ -0,0 +1,254 @@ +######################################### +# Log verbosity control for izat modules +######################################### +# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5 +IZAT_DEBUG_LEVEL = 2 + +################################################## +# Select WIFI Wait Timeout value in seconds for SUPL +################################################## +WIFI_WAIT_TIMEOUT_SELECT = 0 + +################################################## +# Time interval of injecting SRN scan data to modem +# time in seconds. +# Note: recommended value is between 1-5 sec +################################################## +LPPE_SRN_DATA_SCAN_INJECT_TIME=2 + +################################################## +# Identify this target as OTA updated or new +# 0 - New target +# 1 - OTA updated +################################################## +OTA_UPDATED_TARGET=0 + +################################ +# NLP Settings +################################ +# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred +# For Automotive products, please use NLP_MODE = 4 only. +# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode +# to determine how much Tolerance for first position +# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode +# to determine how much Tolerance for positions after first +# NLP_THRESHOLD: Sets how many failures needed before +# switching preferred NLP in Combo mode +# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy +# must be, in multiples, between two NLP location reports to +# be considered much worse accuracy. Used in switching logic +# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines +# whether or not to still send network location requests to +# QNP when the EULA is not consented to by the user. QNP can +# still return ZPP locations or injected locations even +# without EULA consent, but the uncertainty can be high. +# QNP preferred mode prefers QNP when there is EULA consent, +# otherwise OSNLP is used. +NLP_MODE = 4 +NLP_MODE_EMERGENCY = 2 +NLP_TOLERANCE_TIME_FIRST = 5000 +NLP_TOLERANCE_TIME_AFTER = 20000 +NLP_THRESHOLD = 3 +NLP_ACCURACY_MULTIPLE = 2 +NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1 + +######################################### +# NLP PACKAGE SETTINGS +######################################### +# OSNLP_PACKAGE: name of default NLP package +OSNLP_PACKAGE = com.google.android.gms +# REGION_OSNLP_PACKAGE: +# This value will be used as alternative +# for particular region where default NLP is not functional. +#REGION_OSNLP_PACKAGE = + +################################### +# GEOFENCE SERVICES +################################### +# If set to one of the defined values below, it will override +# the responsiveness for geofence services, which implements +# the Proximity Alert API. If not set to a value defined below, +# which is default, it will not override the responsivness. +# The geofence HAL API is unaffected by this value. +# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values: +# 1: LOW responsiveness +# 2: MEDIUM responsiveness +# 3: HIGH responsiveness +GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0 + +##################################### +#GTP Opt-In app +##################################### + +#GTP privacy policy version url +#https support is required +GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html + +#GTP privacy policy version download retry interval +#unit is second. default is 86400 +GTP_PRIVACY_RETRY_INTERVAL = 86400 + +##################################### +# IZAT PREMIUM FEATURE SETTINGS +##################################### +#Possible states of a feature: +#DISABLED +#BASIC +#PREMIUM + +#GTP_MODE valid modes: +# DISABLED +# LEGACY_WWAN +# SDK (WWAN not available for Modems before LocTech 10.0) +GTP_MODE=DISABLED + +#GTP_WAA valid modes: +# DISABLED +# BASIC +GTP_WAA=DISABLED + +#SAP valid modes: +# DISABLED +# BASIC +# PREMIUM +# MODEM_DEFAULT +SAP=PREMIUM + +#FREE_WIFI_SCAN_INJECT valid modes: +#DISABLED +#BASIC +FREE_WIFI_SCAN_INJECT=BASIC + +#SUPL_WIFI valid modes: +#DISABLED +#BASIC +SUPL_WIFI=BASIC + +#WIFI_SUPPLICANT_INFO valid modes: +#DISABLED +#BASIC +WIFI_SUPPLICANT_INFO=BASIC + +##################################### +# Location process launcher settings +##################################### + +# DO NOT MODIFY +# Modifying below attributes without +# caution can have serious implications. + +#Values for PROCESS_STATE: +# ENABLED +# DISABLED + +#PROCESS_NAME +# Name of the executable file. + +#FEATURE MASKS: +# GTP-WIFI 0X03 +# GTP-MP-CELL 0xc00 +# GTP-WAA 0x100 +# SAP 0Xc0 +# ODCPI 0x1000 +# FREE_WIFI_SCAN_INJECT 0x2000 +# SUPL_WIFI 0x4000 +# WIFI_SUPPLICANT_INFO 0x8000 + +#Values for PLATFORMS can be: +#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226 +#2. 'all' or 'all exclude' -> for All platforms +#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937 + +#Values for BASEBAND can be: +#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 +#2. 'all' or 'all exclude' -> for all basebands +#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte +PROCESS_NAME=lowi-server +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=gps wifi inet oem_2901 +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0xf303 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=0 + +PROCESS_NAME=xtwifi-inet-agent +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=inet gps +PREMIUM_FEATURE=1 +IZAT_FEATURE_MASK=0xc03 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +PROCESS_NAME=xtwifi-client +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=wifi inet gps system oem_2904 +PREMIUM_FEATURE=1 +IZAT_FEATURE_MASK=0xd03 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +PROCESS_NAME=slim_daemon +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors +PREMIUM_FEATURE=1 +IZAT_FEATURE_MASK=0xf0 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +PROCESS_NAME=xtra-daemon +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=inet gps system +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=0 + +######################################## +# Engine Service which host DRE module # +# To enable DRE engine service, change # +# PROCESS_STATE=ENABLED # +######################################## +PROCESS_NAME=engine-service +PROCESS_ARGUMENT=DRE-INT libloc_epDr.so +PROCESS_STATE=DISABLED +PROCESS_GROUPS=gps diag inet qwes oem_2901 system +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +######################################## +# Engine Service which host PPE module # +# To enable PPE engine service, change # +# PROCESS_STATE=ENABLED # +# and update process arugements # +# with PPE library name # +#PROCESS_ARGUMENT=PPE libepsimulator.so# +######################################## +PROCESS_NAME=engine-service +PROCESS_ARGUMENT=PPE libepsimulator.so +PROCESS_STATE=DISABLED +PROCESS_GROUPS=gps diag inet oem_2901 +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 |