1 files changed, 0 insertions, 279 deletions
diff --git a/configs/gps/izat.conf b/configs/gps/izat.conf
deleted file mode 100644
index 79d779c..0000000
--- a/configs/gps/izat.conf
+++ /dev/null
@@ -1,279 +0,0 @@
-#########################################
-# Log verbosity control for izat modules
-#########################################
-# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
-IZAT_DEBUG_LEVEL = 5
-
-##################################################
-# Select WIFI Wait Timeout value in seconds for SUPL
-##################################################
-WIFI_WAIT_TIMEOUT_SELECT = 0
-
-##################################################
-# Time interval of injecting SRN scan data to modem
-# time in seconds.
-# Note: recommended value is between 1-5 sec
-##################################################
-LPPE_SRN_DATA_SCAN_INJECT_TIME=2
-
-################################
-# NLP Settings
-################################
-# NLP_MODE  1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
-# For Automotive products, please use NLP_MODE = 4 only.
-# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
-# to determine how much Tolerance for first position
-# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
-# to determine how much Tolerance for positions after first
-# NLP_THRESHOLD: Sets how many failures needed before
-# switching preferred NLP in Combo mode
-# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
-# must be, in multiples, between two NLP location reports to
-# be considered much worse accuracy. Used in switching logic
-# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
-# whether or not to still send network location requests to
-# QNP when the EULA is not consented to by the user. QNP can
-# still return ZPP locations or injected locations even
-# without EULA consent, but the uncertainty can be high.
-# QNP preferred mode prefers QNP when there is EULA consent,
-# otherwise OSNLP is used.
-NLP_MODE = 1
-NLP_MODE_EMERGENCY = 2
-NLP_TOLERANCE_TIME_FIRST = 5000
-NLP_TOLERANCE_TIME_AFTER = 20000
-NLP_THRESHOLD = 3
-NLP_ACCURACY_MULTIPLE = 2
-NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
-
-#########################################
-# NLP PACKAGE AND ACTION SETTINGS
-#########################################
-# OSNLP_PACKAGE/OSNLP_ACTION: name/action of default NLP package
-#OSNLP_PACKAGE = com.google.android.gms
-#OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider
-# REGION_OSNLP_PACKAGE/REGION_OSNLP_ACTION:
-# These two values will be used as alternative
-# for particular region where default NLP is not functional.
-#REGION_OSNLP_PACKAGE = com.baidu.map.location
-#REGION_OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider
-
-# Threshold period for ZPP triggers
-ZPP_TRIGGER_THRESHOLD=60000
-# Accuracy threshold for ZPP positions
-# less accurate positions are ignored
-ZPP_ACCURACY_THRESHOLD=20000
-
-###################################
-# GEOFENCE SERVICES
-###################################
-# If set to one of the defined values below, it will override
-# the responsiveness for geofence services, which implements
-# the Proximity Alert API. If not set to a value defined below,
-# which is default, it will not override the responsivness.
-# The geofence HAL API is unaffected by this value.
-# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
-# 1: LOW responsiveness
-# 2: MEDIUM responsiveness
-# 3: HIGH responsiveness
-GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
-
-#####################################
-#GTP Opt-In app
-#####################################
-
-#GTP privacy policy version url
-#https support is required
-GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
-
-#GTP privacy policy version download retry interval
-#unit is second. default is 86400
-GTP_PRIVACY_RETRY_INTERVAL = 86400
-
-#####################################
-# IZAT PREMIUM FEATURE SETTINGS
-#####################################
-#Possible states of a feature:
-#DISABLED
-#BASIC
-#PREMIUM
-
-#GTP_CELL_PROC valid options:
-# AP
-# MODEM
-GTP_CELL_PROC=MODEM
-
-#GTP_CELL valid modes:
-# DISABLED
-# BASIC
-GTP_CELL=DISABLED
-
-#GTP_WIFI valid modes:
-# DISABLED
-# BASIC
-GTP_WIFI=DISABLED
-
-#GTP_WAA valid modes:
-# DISABLED
-# BASIC
-GTP_WAA=DISABLED
-
-#SAP valid modes:
-# DISABLED
-# BASIC
-# PREMIUM
-SAP=PREMIUM
-
-#ODCPI valid modes:
-#DISABLED
-#BASIC
-ODCPI=BASIC
-
-#FREE_WIFI_SCAN_INJECT valid modes:
-#DISABLED
-#BASIC
-FREE_WIFI_SCAN_INJECT=BASIC
-
-#SUPL_WIFI valid modes:
-#DISABLED
-#BASIC
-SUPL_WIFI=BASIC
-
-#WIFI_SUPPLICANT_INFO valid modes:
-#DISABLED
-#BASIC
-WIFI_SUPPLICANT_INFO=BASIC
-
-#####################################
-# Location process launcher settings
-#####################################
-
-# DO NOT MODIFY
-# Modifying below attributes without
-# caution can have serious implications.
-
-#Values for PROCESS_STATE:
-# ENABLED
-# DISABLED
-
-#PROCESS_NAME
-# Name of the executable file.
-
-#FEATURE MASKS:
-# GTP-WIFI    0X03
-# GTP-AP-CELL 0X0c
-# GTP-MP-CELL 0xc00
-# GTP-WAA     0X300
-# SAP         0Xc0
-# ODCPI      0x1000
-# FREE_WIFI_SCAN_INJECT   0x2000
-# SUPL_WIFI   0x4000
-# WIFI_SUPPLICANT_INFO   0x8000
-
-#Values for PLATFORMS can be:
-#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
-#2. 'all' or 'all exclude' -> for All platforms
-#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
-
-#Values for BASEBAND can be:
-#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
-#2. 'all' or 'all exclude' -> for all basebands
-#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
-PROCESS_NAME=DR_AP_Service
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps diag
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=automotive
-
-#Valyes for LEAN_TARGETS can be:
-#ENABLED  -> if this process is supposed to run on lean and mean targets
-#DISABLED -> if this process is to be disabled on lean and mean targets
-PROCESS_NAME=garden_app
-PROCESS_ARGUMENT=-l 0 -T 1
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps diag
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=automotive
-
-PROCESS_NAME=gpsone_daemon
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=inet
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=msm7630_fusion
-BASEBAND=svlte2a sglte sglte2
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=lowi-server
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=gps net_admin wifi inet qcom_diag
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0xf303
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=xtwifi-inet-agent
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=inet gps
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xf0f
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=xtwifi-client
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=wifi inet gps system oem_2952
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xf0f
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=slim_daemon
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps qcom_diag can
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xf0
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=xtra-daemon
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=inet gps system
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-##################################################
-# The name of process which launches XTRA client.
-# Default process name in software which launches
-# XTRA client is system-server. Uncomment the below
-# to set the desired process which will start the
-# XTRA client.
-##################################################
-# XC20_LAUNCH_PROCESS_NAME=garden_app