diff options
| -rw-r--r-- | configs/gps/flp.conf | 91 | ||||
| -rw-r--r-- | configs/gps/gps.conf | 212 | ||||
| -rw-r--r-- | configs/gps/sap.conf | 70 | ||||
| -rw-r--r-- | gps/etc/Android.mk | 21 | ||||
| -rw-r--r-- | gps/etc/gps.conf | 66 | ||||
| -rw-r--r-- | gps/etc/izat.conf (renamed from configs/gps/izat.conf) | 159 | ||||
| -rw-r--r-- | gps/etc/lowi.conf (renamed from configs/gps/lowi.conf) | 8 | ||||
| -rw-r--r-- | gps/etc/sap.conf | 163 | ||||
| -rw-r--r-- | gps/etc/xtwifi.conf (renamed from configs/gps/xtwifi.conf) | 11 | ||||
| -rw-r--r-- | sdm660.mk | 12 |
10 files changed, 281 insertions, 532 deletions
diff --git a/configs/gps/flp.conf b/configs/gps/flp.conf deleted file mode 100644 index dae3b82..0000000 --- a/configs/gps/flp.conf +++ /dev/null @@ -1,91 +0,0 @@ -################################### -##### FLP settings ##### -################################### - -################################### -# FLP BATCHING SIZE -################################### -# The number of batched locations -# requested to modem. The desired number -# defined below may not be satisfied, as -# the modem can only return the number -# of batched locations that can be allocated, -# which is limited by memory. The default -# batch size defined as 20 as below. -BATCH_SIZE=20 - -# The number of batched locations -# requested to modem for outdoor -# trip batching. The desired number -# defined below may not be satisfied, as -# the modem can only return the number -# of batched locations that can be allocated, -# which is limited by memory. The default -# trip batch size defined as 600 as below. -OUTDOOR_TRIP_BATCH_SIZE=600 - -################################### -# FLP BATCHING SESSION TIMEOUT -################################### -# Duration with which batch session timeout -# happens in milliseconds. If not specified -# or set to zero, batching session timeout -# defaults to 20 seconds by the modem. -# BATCH_SESSION_TIMEOUT=20000 - -################################### -# FLP CAPABILITIES BIT MASK -################################### -# GEOFENCE = 0x01 -# BATCHING = 0x02 -# default = GEOFENCE | BATCHING -CAPABILITIES=0x03 - -################################### -# FLP BATCHING ACCURACY -################################### -# Set to one of the defined values below -# to define the accuracy of batching. -# If not specified, accuracy defaults -# to LOW. -# FLP BATCHING ACCURACY values: -# Low accuracy = 0 -# Medium accuracy = 1 -# High accuracy = 2 -ACCURACY=1 - -################################### -# FLP GEOFENCE RESPONSIVENESS -################################### -# If set to one of the defined values below, -# it will override the responsiveness for -# FLP geofence, which implements the fused -# location API. If not set to a value defined -# below, which is default, it will not -# override the responsivness. -# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values: -# 1: LOW responsiveness -# 2: MEDIUM responsiveness -# 3: HIGH responsiveness -FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0 - -#################################### -# By default APPS must support LB only if modem support -# LB 1.5 and above. This parameter adds an exception -# for targets where modem only supports LB 1.0. -# This might be useful for primarily outdoor devices. -# 0: MUST NOT ALLOW LB IF MODEM ONLY SUPPORTS -# LB 1.0 -# 1: ALLOW LB IF MODEM ONLY SUPPORTS LB 1.0 -#################################### -ALLOW_LB_1_0 = 0 - -#################################### -# By default if network fixes are not sensor assisted -# these fixes must be dropped. This parameter adds an exception -# for targets where there is no PDR and we still want to -# report out network fixes -# 0: MUST NOT ALLOW NETWORK FIXES -# 1: ALLOW NETWORK FIXES -#################################### -ALLOW_NETWORK_FIXES = 0 diff --git a/configs/gps/gps.conf b/configs/gps/gps.conf deleted file mode 100644 index 54036df..0000000 --- a/configs/gps/gps.conf +++ /dev/null @@ -1,212 +0,0 @@ -#Uncommenting these urls would only enable -#the power up auto injection and force injection(test case). -#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin -#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin -#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin - -#Version check for XTRA -#DISABLE = 0 -#AUTO = 1 -#XTRA2 = 2 -#XTRA3 = 3 -XTRA_VERSION_CHECK=0 - -XTRA_TEST_ENABLED = 1 -XTRA_THROTTLE_ENABLED = 0 - - - -# Error Estimate -# _SET = 1 -# _CLEAR = 0 -ERR_ESTIMATE=0 - -#NTP server -NTP_SERVER=time.izatcloud.net - -#XTRA CA path -XTRA_CA_PATH=/system/etc/security/cacerts - -# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info -# 4 - Debug, 5 - Verbose -# If DEBUG_LEVEL is commented, Android's logging levels will be used -DEBUG_LEVEL = 5 - -# Intermediate position report, 1=enable, 0=disable -INTERMEDIATE_POS=0 - -# Below bit mask configures how GPS functionalities -# should be locked when user turns off GPS on Settings -# Set bit 0x1 if MO GPS functionalities are to be locked -# Set bit 0x2 if NI GPS functionalities are to be locked -# default - non is locked for backward compatibility -#GPS_LOCK = 0 - -# supl version 1.0 -SUPL_VER=0x20000 - -# Emergency SUPL, 1=enable, 0=disable -#SUPL_ES=0 - -#Choose PDN for Emergency SUPL -#1 - Use emergency PDN -#0 - Use regular SUPL PDN for Emergency SUPL -USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 - -#SUPL_MODE is a bit mask set in config.xml per carrier by default. -#If it is uncommented here, this value will overwrite the value from -#config.xml. -#MSA=0X2 -#MSB=0X1 -#SUPL_MODE= - -# GPS Capabilities bit mask -# SCHEDULING = 0x01 -# MSB = 0x02 -# MSA = 0x04 -# ON_DEMAND_TIME = 0x10 -# GEOFENCE = 0x20 -# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE -CAPABILITIES=0x37 - -# Accuracy threshold for intermediate positions -# less accurate positions are ignored, 0 for passing all positions -# ACCURACY_THRES=5000 - -################################ -##### AGPS server settings ##### -################################ - -# FOR SUPL SUPPORT, set the following -SUPL_HOST=supl.qxwz.com -SUPL_PORT=7275 - -# FOR C2K PDE SUPPORT, set the following -# C2K_HOST=c2k.pde.com or IP -# C2K_PORT=1234 - -# Bitmask of slots that are available -# for write/install to, where 1s indicate writable, -# and the default value is 0 where no slots -# are writable. For example, AGPS_CERT_WRITABLE_MASK -# of b1000001010 makes 3 slots available -# and the remaining 7 slots unwritable. -#AGPS_CERT_WRITABLE_MASK=0 - -#################################### -# LTE Positioning Profile Settings -#################################### -# 0: Enable RRLP on LTE(Default) -# 1: Enable LPP_User_Plane on LTE -# 2: Enable LPP_Control_Plane -# 3: Enable both LPP_User_Plane and LPP_Control_Plane -LPP_PROFILE = 3 - -################################ -# EXTRA SETTINGS -################################ -# NMEA provider (1=Modem Processor, 0=Application Processor) -NMEA_PROVIDER=0 -# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) -SGLTE_TARGET=0 - -################################################## -# Select Positioning Protocol on A-GLONASS system -################################################## -# 0x1: RRC CPlane -# 0x2: RRLP UPlane -# 0x4: LLP Uplane -A_GLONASS_POS_PROTOCOL_SELECT = 0 - -################################################## -# Select technology for LPPe Control Plane -################################################## -# 0x1: DBH for LPPe CP -# 0x2: WLAN AP Measurements for LPPe CP -# 0x4: SRN AP measurement for CP -# 0x8: Sensor Barometer Measurement LPPe CP -LPPE_CP_TECHNOLOGY = 0 - -################################################## -# Select technology for LPPe User Plane -################################################## -# 0x1: DBH for LPPe UP -# 0x2: WLAN AP Measurements for LPPe UP -# 0x4: SRN AP measurement for UP -# 0x8: Sensor Barometer Measurement LPPe UP -LPPE_UP_TECHNOLOGY = 0 - -################################################## -# AGPS_CONFIG_INJECT -################################################## -# enable/disable injection of AGPS configurations: -# SUPL_VER -# SUPL_HOST -# SUPL_PORT -# C2K_HOST -# C2K_PORT -# LPP_PROFILE -# A_GLONASS_POS_PROTOCOL_SELECT -# 0: disable -# 1: enable -AGPS_CONFIG_INJECT = 1 - -################################################## -# GNSS settings for automotive use cases -# Configurations in following section are -# specific to automotive use cases, others -# please do not change, keep the default values -################################################## - -# AP Coarse Timestamp Uncertainty -################################################## -# default : 10 -# AP time stamp uncertainty, until GNSS receiver -# is able to acquire better timing information -AP_TIMESTAMP_UNCERTAINTY = 10 - -################################################## -# QDR engine availability status -################################################## -# 0 : NO QDR (default) -# 1 : QDR enabled -# This settings enables QDR Configuration for -# automotive use case, if enabled then -# DR_AP_Service needs to be enabled in izat.conf -#EXTERNAL_DR_ENABLED = 0 - -##################################### -# DR_SYNC Pulse Availability -##################################### -# 0 : DR_SYNC pulse not available (default) -# 1 : DR_SYNC pulse available -# This configuration enables the driver to make use -# of PPS events generated by DR_SYNC pulse -# Standard Linux PPS driver needs to be enabled -DR_SYNC_ENABLED = 0 - -##################################### -# PPS Device name -##################################### -PPS_DEVICENAME = /dev/pps0 - -##################################### -# AP Clock Accuracy -##################################### -# Quality of APPS processor clock (in PPM). -# Value specified is used for calculation of -# APPS time stamp uncertainty -AP_CLOCK_PPM = 100 - -##################################### -# MAX ms difference to detect missing pulse -##################################### -# Specifies time threshold in ms to validate any missing PPS pulses -MISSING_PULSE_TIME_DELTA = 900 - -##################################### -# Propagation time uncertainty -##################################### -# This settings enables time uncertainty propagation -# logic incase of missing PPS pulse -PROPAGATION_TIME_UNCERTAINTY = 1 diff --git a/configs/gps/sap.conf b/configs/gps/sap.conf deleted file mode 100644 index eb21f01..0000000 --- a/configs/gps/sap.conf +++ /dev/null @@ -1,70 +0,0 @@ -################################ -# Sensor Settings -################################ -#The following parameters are optional. -#Internal defaults support MEMS sensors -#native to most handset devices. -#Device specific sensor characterization -#for improved performance is possible as -#described in SAP application notes. -#GYRO_BIAS_RANDOM_WALK= -#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY= -#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY= -#RATE_RANDOM_WALK_SPECTRAL_DENSITY= -#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY= - -# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0) -# used in loc_eng_reinit -SENSOR_ACCEL_BATCHES_PER_SEC=2 -SENSOR_ACCEL_SAMPLES_PER_BATCH=5 -SENSOR_GYRO_BATCHES_PER_SEC=2 -SENSOR_GYRO_SAMPLES_PER_BATCH=5 -# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0) -SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4 -SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25 -SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4 -SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25 - -# Sensor Control Mode (0=AUTO, 1=FORCE_ON) -# used in loc_eng_reinit -SENSOR_CONTROL_MODE=0 - -# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable) -# used in loc_eng_reinit -SENSOR_USAGE=0 - -# Choose GSIFF sensor provider (1=Snapdragon Sensors Core, 2=Android NDK) -SENSOR_PROVIDER=1 - -# Bit mask used to define which sensor algorithms are used. -# Setting each bit has the following definition: -# 0x1 - DISABLE_INS_POSITIONING_FILTER -# 0x0 - ENABLE_INS_POSITIONING_FILTER -SENSOR_ALGORITHM_CONFIG_MASK=0x1 - -#Vehicle Network Provider configuration - -#Service configuration strings -#The number before colon in VN_X items defines version of the format of the rest of the string -#VN_ACCEL_CFG=0:5 -#VN_GYRO_CFG=0:5.5 -#VN_ODOMETRY_CFG=0:2,4.5 -VN_ACCEL_CFG=1:128,0,12,0.0048828125,12,12,0.0048828125,24,12,0.0048828125 -VN_GYRO_CFG=1:129,0,16,0.00006103515625,16,16,0.00006103515625,32,16,0.00006103515625 -VN_ODOMETRY_CFG=1:130,0,1,5,6,32 -VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2 -VN_DWS_CFG=1:132,5,8,1,2,3,1,1,5,2,7,2,9,2,11,2,13,2,15,2,17,2,19,2 -VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8 - -#Procesors clock ratio: AP and CAN bus microcontroller -VN_PROC_CLOCK_RATIO=1.93165618815148 - -# Time source used by Sensor HAL -# Setting this value controls accuracy of location sensor services. -# 0 - Unknown -# 1 - CLOCK_BOOTTIME -# 2 - CLOCK_MONOTONIC -# 3 - CLOCK_REALTIME -# 4 - CLOCK_BOOTTIME using Alarm timer interface -NDK_PROVIDER_TIME_SOURCE=1 - diff --git a/gps/etc/Android.mk b/gps/etc/Android.mk deleted file mode 100644 index 22ca2f7..0000000 --- a/gps/etc/Android.mk +++ /dev/null @@ -1,21 +0,0 @@ - -LOCAL_PATH := $(call my-dir) - -include $(CLEAR_VARS) -LOCAL_MODULE := gps.conf -LOCAL_VENDOR_MODULE := true -LOCAL_MODULE_TAGS := optional -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := gps.conf -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := flp.conf -LOCAL_VENDOR_MODULE := true -LOCAL_MODULE_TAGS := optional -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := flp.conf -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC) -include $(BUILD_PREBUILT) - diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf index 3914757..9e975b6 100644 --- a/gps/etc/gps.conf +++ b/gps/etc/gps.conf @@ -1,3 +1,9 @@ +#Uncommenting these urls would only enable +#the power up auto injection and force injection(test case). +#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin +#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin +#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin + #Version check for XTRA #DISABLE = 0 #AUTO = 1 @@ -5,6 +11,11 @@ #XTRA3 = 3 XTRA_VERSION_CHECK=0 +XTRA_TEST_ENABLED = 1 +XTRA_THROTTLE_ENABLED = 0 + + + # Error Estimate # _SET = 1 # _CLEAR = 0 @@ -14,57 +25,61 @@ ERR_ESTIMATE=0 NTP_SERVER=time.izatcloud.net #XTRA CA path -XTRA_CA_PATH=/usr/lib/ssl/certs +XTRA_CA_PATH=/system/etc/security/cacerts # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose # If DEBUG_LEVEL is commented, Android's logging levels will be used -DEBUG_LEVEL = 3 +DEBUG_LEVEL = 5 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 +# Below bit mask configures how GPS functionalities +# should be locked when user turns off GPS on Settings +# Set bit 0x1 if MO GPS functionalities are to be locked +# Set bit 0x2 if NI GPS functionalities are to be locked +# default - non is locked for backward compatibility +GPS_LOCK = 0 + # supl version 1.0 -SUPL_VER=0x10000 +SUPL_VER=0x20000 # Emergency SUPL, 1=enable, 0=disable -#SUPL_ES=1 +SUPL_ES=0 #Choose PDN for Emergency SUPL #1 - Use emergency PDN #0 - Use regular SUPL PDN for Emergency SUPL -#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 +USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 #SUPL_MODE is a bit mask set in config.xml per carrier by default. #If it is uncommented here, this value will overwrite the value from #config.xml. #MSA=0X2 #MSB=0X1 -#SUPL_MODE= +SUPL_MODE=3 # GPS Capabilities bit mask # SCHEDULING = 0x01 # MSB = 0x02 # MSA = 0x04 # ON_DEMAND_TIME = 0x10 -# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING -CAPABILITIES=0x17 +# GEOFENCE = 0x20 +# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE +CAPABILITIES=0x13 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions -# ACCURACY_THRES=5000 +ACCURACY_THRES=70 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following -# SUPL_HOST=supl.host.com or IP -# SUPL_PORT=1234 - -# FOR MO SUPL SUPPORT, set the following -# MO_SUPL_HOST=supl.host.com or IP -# MO_SUPL_PORT=1234 +SUPL_HOST=supl.google.com +SUPL_PORT=7275 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP @@ -87,13 +102,6 @@ CAPABILITIES=0x17 # 3: Enable both LPP_User_Plane and LPP_Control_Plane LPP_PROFILE = 2 -#################################### -#Datum Type -#################################### -# 0: WGS-84 -# 1: PZ-90 -DATUM_TYPE = 0 - ################################ # EXTRA SETTINGS ################################ @@ -108,7 +116,7 @@ SGLTE_TARGET=0 # 0x1: RRC CPlane # 0x2: RRLP UPlane # 0x4: LLP Uplane -A_GLONASS_POS_PROTOCOL_SELECT = 0 +A_GLONASS_POS_PROTOCOL_SELECT = 0x2 ################################################## # Select technology for LPPe Control Plane @@ -135,8 +143,6 @@ A_GLONASS_POS_PROTOCOL_SELECT = 0 # SUPL_VER # SUPL_HOST # SUPL_PORT -# MO_SUPL_HOST -# MO_SUPL_PORT # C2K_HOST # C2K_PORT # LPP_PROFILE @@ -185,16 +191,6 @@ DR_SYNC_ENABLED = 0 PPS_DEVICENAME = /dev/pps0 ##################################### -# Ignore PPS at Startup and after long outage -##################################### -IGNORE_PPS_PULSE_COUNT = 1 - -##################################### -# Long GNSS RF outage in seconds -##################################### -GNSS_OUTAGE_DURATION = 10 - -##################################### # AP Clock Accuracy ##################################### # Quality of APPS processor clock (in PPM). diff --git a/configs/gps/izat.conf b/gps/etc/izat.conf index 79d779c..678228c 100644 --- a/configs/gps/izat.conf +++ b/gps/etc/izat.conf @@ -2,7 +2,7 @@ # Log verbosity control for izat modules ######################################### # OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5 -IZAT_DEBUG_LEVEL = 5 +IZAT_DEBUG_LEVEL = 2 ################################################## # Select WIFI Wait Timeout value in seconds for SUPL @@ -16,6 +16,13 @@ WIFI_WAIT_TIMEOUT_SELECT = 0 ################################################## LPPE_SRN_DATA_SCAN_INJECT_TIME=2 +################################################## +# Identify this target as OTA updated or new +# 0 - New target +# 1 - OTA updated +################################################## +OTA_UPDATED_TARGET=0 + ################################ # NLP Settings ################################ @@ -37,7 +44,7 @@ LPPE_SRN_DATA_SCAN_INJECT_TIME=2 # without EULA consent, but the uncertainty can be high. # QNP preferred mode prefers QNP when there is EULA consent, # otherwise OSNLP is used. -NLP_MODE = 1 +NLP_MODE = 4 NLP_MODE_EMERGENCY = 2 NLP_TOLERANCE_TIME_FIRST = 5000 NLP_TOLERANCE_TIME_AFTER = 20000 @@ -46,22 +53,14 @@ NLP_ACCURACY_MULTIPLE = 2 NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1 ######################################### -# NLP PACKAGE AND ACTION SETTINGS +# NLP PACKAGE SETTINGS ######################################### -# OSNLP_PACKAGE/OSNLP_ACTION: name/action of default NLP package -#OSNLP_PACKAGE = com.google.android.gms -#OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider -# REGION_OSNLP_PACKAGE/REGION_OSNLP_ACTION: -# These two values will be used as alternative +# OSNLP_PACKAGE: name of default NLP package +OSNLP_PACKAGE = com.google.android.gms +# REGION_OSNLP_PACKAGE: +# This value will be used as alternative # for particular region where default NLP is not functional. -#REGION_OSNLP_PACKAGE = com.baidu.map.location -#REGION_OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider - -# Threshold period for ZPP triggers -ZPP_TRIGGER_THRESHOLD=60000 -# Accuracy threshold for ZPP positions -# less accurate positions are ignored -ZPP_ACCURACY_THRESHOLD=20000 +#REGION_OSNLP_PACKAGE = ################################### # GEOFENCE SERVICES @@ -97,20 +96,11 @@ GTP_PRIVACY_RETRY_INTERVAL = 86400 #BASIC #PREMIUM -#GTP_CELL_PROC valid options: -# AP -# MODEM -GTP_CELL_PROC=MODEM - -#GTP_CELL valid modes: -# DISABLED -# BASIC -GTP_CELL=DISABLED - -#GTP_WIFI valid modes: +#GTP_MODE valid modes: # DISABLED -# BASIC -GTP_WIFI=DISABLED +# LEGACY_WWAN +# SDK (WWAN not available for Modems before LocTech 10.0) +GTP_MODE=DISABLED #GTP_WAA valid modes: # DISABLED @@ -121,13 +111,9 @@ GTP_WAA=DISABLED # DISABLED # BASIC # PREMIUM +# MODEM_DEFAULT SAP=PREMIUM -#ODCPI valid modes: -#DISABLED -#BASIC -ODCPI=BASIC - #FREE_WIFI_SCAN_INJECT valid modes: #DISABLED #BASIC @@ -160,9 +146,8 @@ WIFI_SUPPLICANT_INFO=BASIC #FEATURE MASKS: # GTP-WIFI 0X03 -# GTP-AP-CELL 0X0c # GTP-MP-CELL 0xc00 -# GTP-WAA 0X300 +# GTP-WAA 0x100 # SAP 0Xc0 # ODCPI 0x1000 # FREE_WIFI_SCAN_INJECT 0x2000 @@ -178,85 +163,49 @@ WIFI_SUPPLICANT_INFO=BASIC #1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 #2. 'all' or 'all exclude' -> for all basebands #3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte -PROCESS_NAME=DR_AP_Service -PROCESS_ARGUMENT= -PROCESS_STATE=DISABLED -PROCESS_GROUPS=gps diag -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=all -BASEBAND=all -LEAN_TARGETS=DISABLED -HARDWARE_TYPE=automotive - -#Valyes for LEAN_TARGETS can be: -#ENABLED -> if this process is supposed to run on lean and mean targets -#DISABLED -> if this process is to be disabled on lean and mean targets -PROCESS_NAME=garden_app -PROCESS_ARGUMENT=-l 0 -T 1 -PROCESS_STATE=DISABLED -PROCESS_GROUPS=gps diag -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=all -BASEBAND=all -LEAN_TARGETS=DISABLED -HARDWARE_TYPE=automotive - -PROCESS_NAME=gpsone_daemon -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=inet -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=msm7630_fusion -BASEBAND=svlte2a sglte sglte2 -LEAN_TARGETS=DISABLED -HARDWARE_TYPE=all - PROCESS_NAME=lowi-server PROCESS_ARGUMENT= PROCESS_STATE=ENABLED -PROCESS_GROUPS=gps net_admin wifi inet qcom_diag +PROCESS_GROUPS=gps wifi inet oem_2901 PREMIUM_FEATURE=0 IZAT_FEATURE_MASK=0xf303 PLATFORMS=all BASEBAND=all -LEAN_TARGETS=DISABLED HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=0 PROCESS_NAME=xtwifi-inet-agent PROCESS_ARGUMENT= PROCESS_STATE=ENABLED PROCESS_GROUPS=inet gps PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xf0f +IZAT_FEATURE_MASK=0xc03 PLATFORMS=all BASEBAND=all -LEAN_TARGETS=DISABLED HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 PROCESS_NAME=xtwifi-client PROCESS_ARGUMENT= PROCESS_STATE=ENABLED -PROCESS_GROUPS=wifi inet gps system oem_2952 +PROCESS_GROUPS=wifi inet gps system oem_2904 PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xf0f +IZAT_FEATURE_MASK=0xd03 PLATFORMS=all BASEBAND=all -LEAN_TARGETS=DISABLED HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 PROCESS_NAME=slim_daemon PROCESS_ARGUMENT= -PROCESS_STATE=DISABLED -PROCESS_GROUPS=gps qcom_diag can +PROCESS_STATE=ENABLED +PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors PREMIUM_FEATURE=1 IZAT_FEATURE_MASK=0xf0 PLATFORMS=all BASEBAND=all -LEAN_TARGETS=DISABLED HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 PROCESS_NAME=xtra-daemon PROCESS_ARGUMENT= @@ -266,14 +215,40 @@ PREMIUM_FEATURE=0 IZAT_FEATURE_MASK=0 PLATFORMS=all BASEBAND=all -LEAN_TARGETS=DISABLED HARDWARE_TYPE=all - -################################################## -# The name of process which launches XTRA client. -# Default process name in software which launches -# XTRA client is system-server. Uncomment the below -# to set the desired process which will start the -# XTRA client. -################################################## -# XC20_LAUNCH_PROCESS_NAME=garden_app +VENDOR_ENHANCED_PROCESS=0 + +######################################## +# Engine Service which host DRE module # +# To enable DRE engine service, change # +# PROCESS_STATE=ENABLED # +######################################## +PROCESS_NAME=engine-service +PROCESS_ARGUMENT=DRE-INT libloc_epDr.so +PROCESS_STATE=DISABLED +PROCESS_GROUPS=gps diag inet qwes oem_2901 system +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +######################################## +# Engine Service which host PPE module # +# To enable PPE engine service, change # +# PROCESS_STATE=ENABLED # +# and update process arugements # +# with PPE library name # +#PROCESS_ARGUMENT=PPE libepsimulator.so# +######################################## +PROCESS_NAME=engine-service +PROCESS_ARGUMENT=PPE libepsimulator.so +PROCESS_STATE=DISABLED +PROCESS_GROUPS=gps diag inet oem_2901 +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +BASEBAND=all +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 diff --git a/configs/gps/lowi.conf b/gps/etc/lowi.conf index 5fdca39..5006b59 100644 --- a/configs/gps/lowi.conf +++ b/gps/etc/lowi.conf @@ -5,7 +5,11 @@ # GENERAL DESCRIPTION # This file contains the config params for LOWI # -# Copyright (c) 2012-2013 Qualcomm Atheros, Inc. +# Copyright (c) 2019 Qualcomm Technologies, Inc. +# All Rights Reserved. +# Confidential and Proprietary - Qualcomm Technologies, Inc. +# +# 2012-2013 Qualcomm Atheros, Inc. # All Rights Reserved. # Qualcomm Atheros Confidential and Proprietary. # @@ -19,3 +23,5 @@ # Log level # EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100 LOWI_LOG_LEVEL = 3 +LOWI_USE_LOWI_LP = 0 + diff --git a/gps/etc/sap.conf b/gps/etc/sap.conf new file mode 100644 index 0000000..98fddba --- /dev/null +++ b/gps/etc/sap.conf @@ -0,0 +1,163 @@ +################################ +# Sensor Settings +################################ +#The following parameters are optional. +#Internal defaults support MEMS sensors +#native to most handset devices. +#Device specific sensor characterization +#for improved performance is possible as +#described in SAP application notes. +#GYRO_BIAS_RANDOM_WALK= +#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY= +#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY= +#RATE_RANDOM_WALK_SPECTRAL_DENSITY= +#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY= + +# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0) +# used in loc_eng_reinit +SENSOR_ACCEL_BATCHES_PER_SEC=2 +SENSOR_ACCEL_SAMPLES_PER_BATCH=5 +SENSOR_GYRO_BATCHES_PER_SEC=2 +SENSOR_GYRO_SAMPLES_PER_BATCH=5 +# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0) +SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4 +SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25 +SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4 +SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25 + +# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT) +# used in loc_eng_reinit +SENSOR_CONTROL_MODE=1 +SENSOR_USAGE=0 +SENSOR_PROVIDER=1 + +# Bit mask used to define which sensor algorithms are used. +# Setting each bit has the following definition: +# 0x1 - DISABLE_INS_POSITIONING_FILTER +# 0x0 - ENABLE_INS_POSITIONING_FILTER +SENSOR_ALGORITHM_CONFIG_MASK=0x0 + +#Vehicle Network Provider configuration + +#Service configuration strings +#The number before colon in VN_X items defines version of the format of the rest of the string +#VN_ACCEL_CFG=0:5 +#VN_GYRO_CFG=0:5.5 +#VN_ODOMETRY_CFG=0:2,4.5 + +################################################ +# QDR3 configurations # +################################################ +VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2 +VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8 + +################################################ +# QDR2-Gyro configurations # +################################################ +#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002 +#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8 +#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8 + +################################################ +# QDR2-DWT configurations # +################################################ +#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1 +#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8 +#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0 +#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0 + +##################################################################################### +# VNW service batching configuration strings # +# VNW provider will initialize default type as Time based batching # +# Each service batch value is configured to be 100 # +# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE # +# is set to time based batching # +# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE # +# is set to count based batching # +# Uncomment and update batch time /sample count as per selected batching type # +##################################################################################### +# Batching type +# 1 - Time based (default) +# 2 - Count based +#VN_CFG_BATCH_TYPE=1 + +#Vehicle Accel batching value, it can either accept time in milli seconds or sample count +#VN_ACCEL_CFG_BATCH_VALUE=100 + +#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count +#VN_GYRO_CFG_BATCH_VALUE=100 + +#Vehicle Odo batching value, it can either accept time in milli seconds or sample count +#VN_ODOMETRY_CFG_BATCH_VALUE=100 + +#Vehicle Speed batching value, it can either accept time in milli seconds or sample count +#VN_SPEED_CFG_BATCH_VALUE=100 + +#Vehicle Gear batching value, it can either accept time in milli seconds or sample count +#VN_GEAR_CFG_BATCH_VALUE=100 + +#Vehicle DWS batching value, it can either accept time in milli seconds or sample count +#VN_DWS_CFG_BATCH_VALUE=100 +#################################################################################### + +#Procesors clock ratio: AP and CAN bus microcontroller +################################################ +# QDR3 configurations # +################################################ +VN_PROC_CLOCK_RATIO=1.0 + +################################################ +# QDR2-DWT OR QDR2-Gyro configurations # +################################################ +#VN_PROC_CLOCK_RATIO = 1.0 + +# Time source used by Sensor HAL +# Setting this value controls accuracy of location sensor services. +# 0 - Unknown +# 1 - CLOCK_BOOTTIME +# 2 - CLOCK_MONOTONIC +# 3 - CLOCK_REALTIME +# 4 - CLOCK_BOOTTIME using Alarm timer interface +NDK_PROVIDER_TIME_SOURCE=1 + +# Sensor Batching Configuration +# 0 - Time based +# 1 - Fixed count based +# 2 - Variable count based +COUNT_BASED_BATCHING=1 +SYNC_ONCE=0 + +#Sensor HAL Provider Configuration HAL Library name including path +################################################ +# # +# Configuration for BMI 160 Sensor # +# # +################################################ +SENSOR_TYPE=2 +SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1 + +################################################ +# # +# Configuration for ASM330 Sensor # +# # +################################################ +#SENSOR_TYPE=1 +#SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1 + + +################################################ +# # +# Configuration for IAM20680 Sensor # +# # +################################################ +#SENSOR_TYPE=3 +#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1 + + +################################################ +# # +# Configuration for SMI130 Sensor # +# # +################################################ +#SENSOR_TYPE=4 +#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1 diff --git a/configs/gps/xtwifi.conf b/gps/etc/xtwifi.conf index 583dd3f..5d7df9e 100644 --- a/configs/gps/xtwifi.conf +++ b/gps/etc/xtwifi.conf @@ -40,10 +40,13 @@ SIZE_BYTE_TOTAL_CACHE = 5000000 # can support ASN URI v3 protocol. # XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3 -# 1: default mode, where mobile downloads tiles and partitions -# 2: mode for memory and bandwidth limited devices, where mobile -# downloads AP list and cell list -# GTP_AP_MODE = 2 +# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed +# for any GTP requests, instead notification is sent to Izat SDK. +# WiFi crowdsourcing module is disabled. +# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed +# for any GTP requests, instead notification is sent to Izat SDK. +# WiFi crowdsourcing module is active, also accessed via Izat SDK. +# GTP_AP_MODE = 4 # 1: MP cell features relies on GTP AP for either download or upload # 0: MP cell features does not rely on GTP AP @@ -241,12 +241,12 @@ PRODUCT_PACKAGES += \ libsensorndkbridge PRODUCT_COPY_FILES += \ - $(COMMON_PATH)/configs/gps/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \ - $(COMMON_PATH)/configs/gps/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \ - $(COMMON_PATH)/configs/gps/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \ - $(COMMON_PATH)/configs/gps/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \ - $(COMMON_PATH)/configs/gps/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \ - $(COMMON_PATH)/configs/gps/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf + $(COMMON_PATH)/gps/etc/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \ + $(COMMON_PATH)/gps/etc/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \ + $(COMMON_PATH)/gps/etc/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \ + $(COMMON_PATH)/gps/etc/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \ + $(COMMON_PATH)/gps/etc/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \ + $(COMMON_PATH)/gps/etc/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf # Healthd PRODUCT_PACKAGES += \ |