diff options
| -rw-r--r-- | rootdir/Android.mk | 73 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.class_core.sh | 216 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.coex.sh | 115 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.crashdata.sh | 48 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.efs.sync.sh | 35 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.sdio.sh | 78 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.syspart_fixup.sh | 80 | ||||
| -rwxr-xr-x | rootdir/bin/init.qcom.wifi.sh | 505 | ||||
| -rwxr-xr-x | rootdir/bin/init.qti.ims.sh | 57 | ||||
| -rwxr-xr-x | rootdir/bin/qca6234-service.sh | 87 | ||||
| -rwxr-xr-x | rootdir/etc/init.qcom.rc | 22 | ||||
| -rw-r--r-- | wayne.mk | 9 |
12 files changed, 0 insertions, 1325 deletions
diff --git a/rootdir/Android.mk b/rootdir/Android.mk index 6a9f7eb..41661ff 100644 --- a/rootdir/Android.mk +++ b/rootdir/Android.mk @@ -12,71 +12,6 @@ LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) include $(BUILD_PREBUILT) include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.class_core.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.class_core.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.coex.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.coex.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.crashdata.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.crashdata.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.efs.sync.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.efs.sync.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.sdio.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.sdio.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - - -include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.syspart_fixup.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.syspart_fixup.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := init.qcom.wifi.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qcom.wifi.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) -LOCAL_MODULE := qca6234-service.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/qca6234-service.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) LOCAL_MODULE := init.qcom.post_boot.sh LOCAL_MODULE_TAGS := optional eng LOCAL_MODULE_CLASS := ETC @@ -85,14 +20,6 @@ LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) include $(BUILD_PREBUILT) include $(CLEAR_VARS) -LOCAL_MODULE := init.qti.ims.sh -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := bin/init.qti.ims.sh -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) -include $(BUILD_PREBUILT) - -include $(CLEAR_VARS) LOCAL_MODULE := init.qcom.rc LOCAL_MODULE_TAGS := optional eng LOCAL_MODULE_CLASS := ETC diff --git a/rootdir/bin/init.qcom.class_core.sh b/rootdir/bin/init.qcom.class_core.sh deleted file mode 100755 index 8f8265d..0000000 --- a/rootdir/bin/init.qcom.class_core.sh +++ /dev/null @@ -1,216 +0,0 @@ -#!/vendor/bin/sh - -# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# * Neither the name of The Linux Foundation nor -# the names of its contributors may be used to endorse or promote -# products derived from this software without specific prior written -# permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# Set platform variables -target=`getprop ro.board.platform` -if [ -f /sys/devices/soc0/hw_platform ]; then - soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null -else - soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null -fi -if [ -f /sys/devices/soc0/soc_id ]; then - soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null -else - soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null -fi -if [ -f /sys/devices/soc0/platform_version ]; then - soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null -else - soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null -fi - - -# Dynamic Memory Managment (DMM) provides a sys file system to the userspace -# that can be used to plug in/out memory that has been configured as unstable. -# This unstable memory can be in Active or In-Active State. -# Each of which the userspace can request by writing to a sys file. -# -# ro.dev.dmm = 1; Indicates that DMM is enabled in the Android User Space. This -# property is set in the Android system properties file. -# -# If ro.dev.dmm.dpd.start_address is set here then the target has a memory -# configuration that supports DynamicMemoryManagement. -init_DMM() -{ - block=-1 - - case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm8960") - ;; - *) - return - ;; - esac - - mem="/sys/devices/system/memory" - op=`cat $mem/movable_start_bytes` - case "$op" in - "0") - log -p i -t DMM DMM Disabled. movable_start_bytes not set: $op - ;; - - "$mem/movable_start_bytes: No such file or directory ") - log -p i -t DMM DMM Disabled. movable_start_bytes does not exist: $op - ;; - - *) - log -p i -t DMM DMM available. movable_start_bytes at $op - movable_start_bytes=0x`cat $mem/movable_start_bytes` - block_size_bytes=0x`cat $mem/block_size_bytes` - block=$((#${movable_start_bytes}/${block_size_bytes})) - - chown -h system.system $mem/memory$block/state - chown -h system.system $mem/probe - chown -h system.system $mem/active - chown -h system.system $mem/remove - - case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") - echo $movable_start_bytes > $mem/probe - case "$?" in - "0") - log -p i -t DMM $movable_start_bytes to physical hotplug succeeded. - ;; - *) - log -p e -t DMM $movable_start_bytes to physical hotplug failed. - return - ;; - esac - - echo online > $mem/memory$block/state - case "$?" in - "0") - log -p i -t DMM \'echo online\' to logical hotplug succeeded. - ;; - *) - log -p e -t DMM \'echo online\' to logical hotplug failed. - return - ;; - esac - ;; - esac - - setprop ro.dev.dmm.dpd.start_address $movable_start_bytes - setprop ro.dev.dmm.dpd.block $block - ;; - esac - - case "$target" in - "msm8960") - return - ;; - esac - - # For 7X30 targets: - # ro.dev.dmm.dpd.start_address is set when the target has a 2x256Mb memory - # configuration. This is also used to indicate that the target is capable of - # setting EBI-1 to Deep Power Down or Self Refresh. - op=`cat $mem/low_power_memory_start_bytes` - case "$op" in - "0") - log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes not set:$op - ;; - "$mem/low_power_memory_start_bytes No such file or directory ") - log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes does not exist:$op - ;; - *) - log -p i -t DMM Self-Refresh-Only available. low_power_memory_start_bytes at $op - ;; - esac -} - -# -# For controlling console and shell on console on 8960 - perist.serial.enable 8960 -# On other target use default ro.debuggable property. -# -serial=`getprop persist.serial.enable` -dserial=`getprop ro.debuggable` -case "$target" in - "msm8960") - case "$serial" in - "0") - echo 0 > /sys/devices/platform/msm_serial_hsl.0/console - ;; - "1") - echo 1 > /sys/devices/platform/msm_serial_hsl.0/console - start console - ;; - *) - case "$dserial" in - "1") - start console - ;; - esac - ;; - esac - ;; - - "msm8610" | "msm8974" | "msm8226") - case "$serial" in - "0") - echo 0 > /sys/devices/f991f000.serial/console - ;; - "1") - echo 1 > /sys/devices/f991f000.serial/console - start console - ;; - *) - case "$dserial" in - "1") - start console - ;; - esac - ;; - esac - ;; - *) - case "$dserial" in - "1") - start console - ;; - esac - ;; -esac - -case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") - insmod /system/lib/modules/ss_mfcinit.ko - insmod /system/lib/modules/ss_vencoder.ko - insmod /system/lib/modules/ss_vdecoder.ko - chmod -h 0666 /dev/ss_mfc_reg - chmod -h 0666 /dev/ss_vdec - chmod -h 0666 /dev/ss_venc - - init_DMM - ;; - - "msm8960") - init_DMM - ;; -esac diff --git a/rootdir/bin/init.qcom.coex.sh b/rootdir/bin/init.qcom.coex.sh deleted file mode 100755 index a9a22f1..0000000 --- a/rootdir/bin/init.qcom.coex.sh +++ /dev/null @@ -1,115 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2009-2010, 2012, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# * Neither the name of The Linux Foundation nor -# the names of its contributors may be used to endorse or promote -# products derived from this software without specific prior written -# permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -LOG_TAG="qcom-bt-wlan-coex" -LOG_NAME="${0}:" - -coex_pid="" -ath_wlan_supported=`getprop wlan.driver.ath` - -loge () -{ - /system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@" -} - -logi () -{ - /system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@" -} - -failed () -{ - loge "$1: exit code $2" - exit $2 -} - -start_coex () -{ - case "$ath_wlan_supported" in - "2") - echo "ATH WLAN Chip ID AR6004 is enabled" - /system/bin/abtfilt -d -z -n -m -a -w wlan0 & - ;; - "1") - echo "ATH WLAN Chip ID is enabled" - # Must have -d -z -n -v -s -w wlan0 parameters for atheros btfilter. - /system/bin/abtfilt -d -z -n -v -q -s -w wlan0 & - ;; - "0") - echo "WCN WLAN Chip ID is enabled" - # Must have -o turned on to avoid daemon (otherwise we cannot get pid) - /system/bin/btwlancoex -o $opt_flags & - ;; - *) - echo "NO WLAN Chip ID is enabled, so enabling ATH as default" - # Must have -d -z -n -v -s -w wlan0 parameters for atheros btfilter. - /system/bin/abtfilt -d -z -n -v -q -s -w wlan0 & - ;; - esac - coex_pid=$! - logi "start_coex: pid = $coex_pid" -} - -kill_coex () -{ - logi "kill_coex: pid = $coex_pid" - kill -TERM $coex_pid - # this shell doesn't exit now -- wait returns for normal exit -} - -# mimic coex options parsing -- maybe a waste of effort -USAGE="${0} [-o] [-c] [-r] [-i] [-h]" - -while getopts "ocrih" f -do - case $f in - o | c | r | i | h) opt_flags="$opt_flags -$f" ;; - \?) echo $USAGE; exit 1;; - esac -done - -# init does SIGTERM on ctl.stop for service -trap "kill_coex" TERM INT - -#Selectively start coex module -target=`getprop ro.board.platform` - -if [ "$target" == "msm8960" ] && [ "$ath_wlan_supported" != "2" ]; then - logi "btwlancoex/abtfilt is not needed" -else - # Build settings may not produce the coex executable - if ls /system/bin/btwlancoex || ls /system/bin/abtfilt - then - start_coex - wait $coex_pid - logi "Coex stopped" - else - logi "btwlancoex/abtfilt not available" - fi -fi -exit 0 diff --git a/rootdir/bin/init.qcom.crashdata.sh b/rootdir/bin/init.qcom.crashdata.sh deleted file mode 100755 index 59cf68d..0000000 --- a/rootdir/bin/init.qcom.crashdata.sh +++ /dev/null @@ -1,48 +0,0 @@ -#!/vendor/bin/sh -# Copyright (c) 2017, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials provided -# with the distribution. -# * Neither the name of The Linux Foundation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -abnormalcnt="persist.vendor.crash.cnt" - -abnormal_cnt=`getprop $abnormalcnt` -crash_detect=`getprop persist.vendor.crash.detect` - -if [ "$abnormal_cnt" = "" ] -then -setprop $abnormalcnt 0 -fi - -if [ "$crash_detect" = "true" ] -then -abnormal_cnt=`expr $abnormal_cnt + 1` -setprop $abnormalcnt $abnormal_cnt -elif [ "$crash_detect" = "false" ];then -setprop persist.vendor.crash.detect true -else -setprop persist.vendor.crash.detect true -fi diff --git a/rootdir/bin/init.qcom.efs.sync.sh b/rootdir/bin/init.qcom.efs.sync.sh deleted file mode 100755 index 5e7bfa1..0000000 --- a/rootdir/bin/init.qcom.efs.sync.sh +++ /dev/null @@ -1,35 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2012, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials provided -# with the distribution. -# * Neither the name of The Linux Foundation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# - -PATH=/system/bin:$PATH -export PATH -cat /sys/devices/platform/rs300000a7.65536/force_sync -cat /sys/devices/platform/rs300100a7.65536/force_sync diff --git a/rootdir/bin/init.qcom.sdio.sh b/rootdir/bin/init.qcom.sdio.sh deleted file mode 100755 index df77745..0000000 --- a/rootdir/bin/init.qcom.sdio.sh +++ /dev/null @@ -1,78 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2010, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials provided -# with the distribution. -# * Neither the name of The Linux Foundation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# For successful WLAN card detection, WLAN needs SDIO polling turned on. -# This script can be used to turn on/off SDIO polling on appropriate -# SDIO slot on the MSM target (e.g. slot 3 on 7x30 surf). - -arg=$1 -target=`getprop ro.board.platform` - -case "$target" in - "msm7627_6x") - echo 1 > /sys/devices/platform/msm_sdcc.1/polling - echo 1 > /sys/devices/platform/msm_sdcc.2/polling - ;; - - "msm7627_ffa") - echo 1 > /sys/devices/platform/msm_sdcc.2/polling - ;; - - "msm7627_surf") - echo 1 > /sys/devices/platform/msm_sdcc.1/polling - echo 1 > /sys/devices/platform/msm_sdcc.2/polling - ;; - - "msm7627a") - echo 1 > /sys/devices/platform/msm_sdcc.2/polling - ;; - - "msm7630_surf") - echo 1 > /sys/devices/platform/msm_sdcc.3/polling - ;; - - "msm7630_1x") - echo 1 > /sys/devices/platform/msm_sdcc.3/polling - ;; - - "msm7630_fusion") - echo 1 > /sys/devices/platform/msm_sdcc.3/polling - ;; - - "msm8660") - echo 1 > /sys/devices/platform/msm_sdcc.4/polling - ;; - - "msm8660_csfb") - echo 1 > /sys/devices/platform/msm_sdcc.4/polling - ;; -esac - -exit 0 diff --git a/rootdir/bin/init.qcom.syspart_fixup.sh b/rootdir/bin/init.qcom.syspart_fixup.sh deleted file mode 100755 index 38d00f1..0000000 --- a/rootdir/bin/init.qcom.syspart_fixup.sh +++ /dev/null @@ -1,80 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2012, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# * Neither the name of The Linux Foundation nor -# the names of its contributors may be used to endorse or promote -# products derived from this software without specific prior written -# permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -target="$1" -serial="$2" - -# No path is set up at this point so we have to do it here. -PATH=/sbin:/system/sbin:/system/bin:/system/xbin -export PATH - -mount_needed=false; - -if [ ! -f /system/etc/boot_fixup ];then -# This should be the first command -# remount system as read-write. - mount -o rw,remount,barrier=1 /system - mount_needed=true; -fi - -# **** WARNING ***** -# This runs in a single-threaded, critical path portion -# of the Android bootup sequence. This is to guarantee -# all necessary system partition fixups are done before -# the rest of the system starts up. Run any non- -# timing critical tasks in a separate process to -# prevent slowdown at boot. - -# Run modem link script -if [ -f /system/etc/init.qcom.modem_links.sh ]; then - /system/vendor/bin/init.qcom.modem_links.sh -fi - -# Run mdm link script -if [ -f /system/etc/init.qcom.mdm_links.sh ]; then - /system/vendor/bin/init.qcom.mdm_links.sh -fi - -# Run wifi script -if [ -f /vendor/bin/init.qcom.wifi.sh ]; then - /vendor/bin/init.qcom.wifi.sh "$target" "$serial" -fi - -# Run the sensor script -if [ -f /system/etc/init.qcom.sensor.sh ]; then - /system/vendor/bin/init.qcom.sensor.sh -fi - -touch /system/etc/boot_fixup - -if $mount_needed ;then -# This should be the last command -# remount system as read-only. - mount -o ro,remount,barrier=1 /system -fi diff --git a/rootdir/bin/init.qcom.wifi.sh b/rootdir/bin/init.qcom.wifi.sh deleted file mode 100755 index d8bb2d3..0000000 --- a/rootdir/bin/init.qcom.wifi.sh +++ /dev/null @@ -1,505 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials provided -# with the distribution. -# * Neither the name of The Linux Foundation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# This script will load and unload the wifi driver to put the wifi in -# in deep sleep mode so that there won't be voltage leakage. -# Loading/Unloading the driver only incase if the Wifi GUI is not going -# to Turn ON the Wifi. In the Script if the wlan driver status is -# ok(GUI loaded the driver) or loading(GUI is loading the driver) then -# the script won't do anything. Otherwise (GUI is not going to Turn On -# the Wifi) the script will load/unload the driver -# This script will get called after post bootup. - -target="$1" -serialno="$2" - -btsoc="" - -# No path is set up at this point so we have to do it here. -PATH=/sbin:/system/sbin:/system/bin:/system/xbin -export PATH - -# Trigger WCNSS platform driver -trigger_wcnss() -{ - # We need to trigger WCNSS platform driver, WCNSS driver - # will export a file which we must touch so that the - # driver knows that userspace is ready to handle firmware - # download requests. - - # See if an appropriately named device file is present - wcnssnode=`ls /dev/wcnss*` - case "$wcnssnode" in - *wcnss*) - # Before triggering wcnss, let it know that - # caldata is available at userspace. - if [ -e /data/misc/wifi/WCNSS_qcom_wlan_cal.bin ]; then - calparm=`ls /sys/module/wcnsscore/parameters/has_calibrated_data` - if [ -e $calparm ] && [ ! -e /data/misc/wifi/WCN_FACTORY ]; then - echo 1 > $calparm - fi - fi - # There is a device file. Write to the file - # so that the driver knows userspace is - # available for firmware download requests - echo 1 > $wcnssnode - ;; - - *) - # There is not a device file present, so - # the driver must not be available - echo "No WCNSS device node detected" - ;; - esac - - # Plumb down the device serial number - if [ -f /sys/devices/*wcnss-wlan/serial_number ]; then - cd /sys/devices/*wcnss-wlan - echo $serialno > serial_number - cd / - elif [ -f /sys/devices/platform/wcnss_wlan.0/serial_number ]; then - echo $serialno > /sys/devices/platform/wcnss_wlan.0/serial_number - fi -} - - -case "$target" in - msm8974* | msm8226* | msm8610*) - -# Check whether device is plugged on the HSIC bus -# Currently HSIC bus will be the first index - - if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then - if [ ! -L /sys/bus/usb/devices/1-1 ]; then - echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind - fi - - chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/bind - chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/unbind - chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/bind - chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/unbind - fi - - wlanchip="" - -# force ar6004 is ar6004_wlan.conf existed. - if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then - wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf` - fi - -# auto detect ar6004-sdio card -# for ar6004-sdio card, the vendor id and device id is as the following -# vendor id device id -# 0x0271 0x0400 -# 0x0271 0x0401 - if [ "$wlanchip" == "" ]; then - sdio_vendors=`echo \`cat /sys/bus/mmc/devices/*/*/vendor\`` - sdio_devices=`echo \`cat /sys/bus/mmc/devices/*/*/device\`` - ven_idx=0 - - for vendor in $sdio_vendors; do - case "$vendor" in - "0x0271") - dev_idx=0 - for device in $sdio_devices; do - if [ $ven_idx -eq $dev_idx ]; then - case "$device" in - "0x0400" | "0x0401" | "0x0402") - wlanchip="AR6004-SDIO" - ;; - *) - ;; - esac - fi - dev_idx=$(( $dev_idx + 1)) - done - ;; - *) - ;; - esac - ven_idx=$(( $ven_idx + 1)) - done - # auto detect ar6004-sdio card end - fi - -# for ar6004-usb card, the vendor id and device id is as the following -# vendor id product id -# 0x0cf3 0x9374 -# 0x0cf3 0x9372 - if [ "$wlanchip" == "" ]; then - usb_vendors=`echo \`cat /sys/bus/usb/devices/*/*/idVendor\`` - usb_products=`echo \`cat /sys/bus/usb/devices/*/*/idProduct\`` - ven_idx=0 - - for vendor in $usb_vendors; do - case "$vendor" in - "0cf3") - dev_idx=0 - for product in $usb_products; do - if [ $ven_idx -eq $dev_idx ]; then - case "$product" in - "9374" | "9372") - wlanchip="AR6004-USB" - ;; - *) - ;; - esac - fi - dev_idx=$(( $dev_idx + 1)) - done - ;; - *) - ;; - esac - ven_idx=$(( $ven_idx + 1)) - done - # auto detect ar6004-usb card end - fi - - echo "The WLAN Chip ID is $wlanchip" - case "$wlanchip" in - "AR6004-USB") - echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind - setprop wlan.driver.ath 2 - setprop qcom.bluetooth.soc ath3k - btsoc="ath3k" - rm /system/lib/modules/wlan.ko - ln -s /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko \ - /system/lib/modules/wlan.ko - rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_usb \ - /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_usb \ - /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - rm /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin_usb \ - /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ - /system/etc/wifi/wpa_supplicant.conf - ;; - - "AR6004-SDIO") - setprop wlan.driver.ath 2 - setprop qcom.bluetooth.soc ath3k - btsoc="ath3k" - # Chown polling nodes as needed from UI running on system server - chmod -h 0200 /sys/devices/msm_sdcc.1/polling - chmod -h 0200 /sys/devices/msm_sdcc.2/polling - chmod -h 0200 /sys/devices/msm_sdcc.3/polling - chmod -h 0200 /sys/devices/msm_sdcc.4/polling - - chown -h system.system /sys/devices/msm_sdcc.1/polling - chown -h system.system /sys/devices/msm_sdcc.2/polling - chown -h system.system /sys/devices/msm_sdcc.3/polling - chown -h system.system /sys/devices/msm_sdcc.4/polling - - rm /system/lib/modules/wlan.ko - ln -s /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko \ - /system/lib/modules/wlan.ko - rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_sdio \ - /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_sdio \ - /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - rm /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin_sdio \ - /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ - /system/etc/wifi/wpa_supplicant.conf - ;; - - *) - echo "*** WI-FI chip ID is not specified in /persist/wlan_chip_id **" - echo "*** Use the default WCN driver. **" - setprop wlan.driver.ath 0 - rm /system/lib/modules/wlan.ko - ln -s /system/lib/modules/pronto/pronto_wlan.ko \ - /system/lib/modules/wlan.ko - # Populate the writable driver configuration file - if [ ! -s /data/misc/wifi/WCNSS_qcom_cfg.ini ]; then - cp /system/etc/wifi/WCNSS_qcom_cfg.ini \ - /data/misc/wifi/WCNSS_qcom_cfg.ini - chown -h system:wifi /data/misc/wifi/WCNSS_qcom_cfg.ini - chmod -h 660 /data/misc/wifi/WCNSS_qcom_cfg.ini - fi - - # The property below is used in Qcom SDK for softap to determine - # the wifi driver config file - setprop wlan.driver.config /data/misc/wifi/WCNSS_qcom_cfg.ini - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \ - /system/etc/wifi/wpa_supplicant.conf - - # Trigger WCNSS platform driver - trigger_wcnss & - ;; - esac - ;; - - apq8084*) - echo "*** Use the CNSS CLD driver.**" - setprop wlan.driver.ath 0 - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \ - /system/etc/wifi/wpa_supplicant.conf - ;; - - msm8960*) - - # Move cfg80211.ko to prima directory, the default cfg80211.ko is - # for wcnss solution - if [ ! -L /system/lib/modules/cfg80211.ko ]; then - mv /system/lib/modules/cfg80211.ko /system/lib/modules/prima/ - fi - - wlanchip="" - - if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then - wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf` - fi - - if [ "$wlanchip" == "" ]; then - # auto detect ar6004-usb card - # for ar6004-usb card, the vendor id and device id is as the following - # vendor id product id - # 0x0cf3 0x9374 - # 0x0cf3 0x9372 - usb_vendors=`echo \`cat /sys/bus/usb/devices/*/*/idVendor\`` - usb_products=`echo \`cat /sys/bus/usb/devices/*/*/idProduct\`` - ven_idx=0 - - for vendor in $usb_vendors; do - case "$vendor" in - "0cf3") - dev_idx=0 - for product in $usb_products; do - if [ $ven_idx -eq $dev_idx ]; then - case "$product" in - "9374" | "9372") - wlanchip="AR6004-USB" - ;; - *) - ;; - esac - fi - dev_idx=$(( $dev_idx + 1)) - done - ;; - *) - ;; - esac - ven_idx=$(( $ven_idx + 1)) - done - # auto detect ar6004-usb card end - fi - - if [ "$wlanchip" == "" ]; then - # auto detect ar6004-sdio card - # for ar6004-sdio card, the vendor id and device id is - # as the following - # vendor id device id - # 0x0271 0x0400 - # 0x0271 0x0401 - sdio_vendors=`echo \`cat /sys/bus/mmc/devices/*/*/vendor\`` - sdio_devices=`echo \`cat /sys/bus/mmc/devices/*/*/device\`` - ven_idx=0 - - for vendor in $sdio_vendors; do - case "$vendor" in - "0x0271") - dev_idx=0 - for device in $sdio_devices; do - if [ $ven_idx -eq $dev_idx ]; then - case "$device" in - "0x0400" | "0x0401") - wlanchip="AR6004-SDIO" - ;; - *) - ;; - esac - fi - dev_idx=$(( $dev_idx + 1)) - done - ;; - *) - ;; - esac - ven_idx=$(( $ven_idx + 1)) - done - # auto detect ar6004-sdio card end - fi - - echo "The WLAN Chip ID is $wlanchip" - case "$wlanchip" in - "AR6004-USB") - setprop wlan.driver.ath 2 - rm /system/lib/modules/wlan.ko - rm /system/lib/modules/cfg80211.ko - ln -s /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko \ - /system/lib/modules/wlan.ko - ln -s /system/lib/modules/ath6kl-3.5/cfg80211.ko \ - /system/lib/modules/cfg80211.ko - rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_usb \ - /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_usb \ - /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ - /system/etc/wifi/wpa_supplicant.conf - ;; - "AR6004-SDIO") - setprop wlan.driver.ath 2 - setprop qcom.bluetooth.soc ath3k - btsoc="ath3k" - rm /system/lib/modules/wlan.ko - rm /system/lib/modules/cfg80211.ko - ln -s /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko \ - /system/lib/modules/wlan.ko - ln -s /system/lib/modules/ath6kl-3.5/cfg80211.ko \ - /system/lib/modules/cfg80211.ko - rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_sdio \ - /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin - ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_sdio \ - /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ - /system/etc/wifi/wpa_supplicant.conf - ;; - *) - echo "*** WI-FI chip ID is not specified in /persist/wlan_chip_id **" - echo "*** Use the default WCN driver. **" - setprop wlan.driver.ath 0 - rm /system/lib/modules/wlan.ko - rm /system/lib/modules/cfg80211.ko - ln -s /system/lib/modules/prima/prima_wlan.ko \ - /system/lib/modules/wlan.ko - ln -s /system/lib/modules/prima/cfg80211.ko \ - /system/lib/modules/cfg80211.ko - - # The property below is used in Qcom SDK for softap to determine - # the wifi driver config file - setprop wlan.driver.config /data/misc/wifi/WCNSS_qcom_cfg.ini - - # Use different wpa_supplicant.conf template between wcn driver - # and ath6kl driver - rm /system/etc/wifi/wpa_supplicant.conf - ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \ - /system/etc/wifi/wpa_supplicant.conf - - # Trigger WCNSS platform driver - trigger_wcnss & - ;; - esac - ;; - - msm7627a*) - - # The default cfg80211 module is for volans - if [ ! -L /system/lib/modules/cfg80211.ko ]; then - mv /system/lib/modules/cfg80211.ko /system/lib/modules/volans/ - fi - - wlanchip=`cat /persist/wlan_chip_id` - echo "The WLAN Chip ID is $wlanchip" - case "$wlanchip" in - "ATH6KL") - setprop wlan.driver.ath 1 - rm /system/lib/modules/wlan.ko - rm /system/lib/modules/cfg80211.ko - ln -s /system/lib/modules/ath6kl/ath6kl_sdio.ko \ - /system/lib/modules/wlan.ko - ln -s /system/lib/modules/ath6kl/cfg80211.ko \ - /system/lib/modules/cfg80211.ko - ;; - "WCN1314") - setprop wlan.driver.ath 0 - rm /system/lib/modules/wlan.ko - rm /system/lib/modules/cfg80211.ko - ln -s /system/lib/modules/volans/WCN1314_rf.ko \ - /system/lib/modules/wlan.ko - ln -s /system/lib/modules/volans/cfg80211.ko \ - /system/lib/modules/cfg80211.ko - ;; - *) - setprop wlan.driver.ath 1 - rm /system/lib/modules/wlan.ko - rm /system/lib/modules/cfg80211.ko - ln -s /system/lib/modules/ath6kl/ath6kl_sdio.ko \ - /system/lib/modules/wlan.ko - ln -s /system/lib/modules/ath6kl/cfg80211.ko \ - /system/lib/modules/cfg80211.ko - echo "************************************************************" - echo "*** Error:WI-FI chip ID is not specified in" - echo "/persist/wlan_chip_id" - echo "******* WI-FI may not work ***************************" - ;; - esac - ;; - - msm7627*) - ln -s /data/hostapd/qcom_cfg.ini /etc/firmware/wlan/qcom_cfg.ini - ln -s /persist/qcom_wlan_nv.bin /etc/firmware/wlan/qcom_wlan_nv.bin - ;; - - msm8660*) - ;; - - msm7630*) - ;; - - *) - ;; -esac - diff --git a/rootdir/bin/init.qti.ims.sh b/rootdir/bin/init.qti.ims.sh deleted file mode 100755 index c2ac44e..0000000 --- a/rootdir/bin/init.qti.ims.sh +++ /dev/null @@ -1,57 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2014, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials provided -# with the distribution. -# * Neither the name of The Linux Foundation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# - -dir0=/data -trigger_file=$dir0/ims_diabled -ims_disabled=`getprop persist.ims.disabled` -target=`getprop ro.build.product` - -#if [ ! -e $trigger_file ]; then -# for future use in doing conditional debugging -#else -# -#fi -echo "$ims_disabled" -echo "$target" - -if [ "$ims_disabled" = "0" ]; then - echo "ims will be enabled" - setprop service.qti.ims.enabled 1 - exit -fi - -if [ "$ims_disabled" = "1" ] || [ "$target" = "msm8909_512" ]; then - echo "ims is disabled" - setprop service.qti.ims.enabled 0 -else - echo "ims is enabled" - setprop service.qti.ims.enabled 1 -fi diff --git a/rootdir/bin/qca6234-service.sh b/rootdir/bin/qca6234-service.sh deleted file mode 100755 index ee0f4dc..0000000 --- a/rootdir/bin/qca6234-service.sh +++ /dev/null @@ -1,87 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials provided -# with the distribution. -# * Neither the name of The Linux Foundation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Check whether device is plugged on the HSIC bus -# Currently HSIC bus will be the first index - -PATH=/sbin:/system/sbin:/system/bin:/system/xbin -export PATH - -deviceprop=`getprop ro.baseband` -boardprop=`getprop ro.board.platform` - -if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then - if [ ! -L /sys/bus/usb/devices/1-1 ]; then - echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind - fi - - chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/bind - chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/unbind - chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/bind - chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/unbind -fi - -wlanchip="" - -if [ "$deviceprop" == "apq" ] && [ "$boardprop" == "msm8974" ]; then - wlanchip="AR6004-USB" -fi - -# force ar6004 is ar6004_wlan.conf existed. -if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then - wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf` -fi - -echo "The WLAN Chip ID is $wlanchip" -if [ "$wlanchip" == "AR6004-USB" ]; then - echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind - setprop wlan.driver.ath 2 - setprop qcom.bluetooth.soc ath3k - setprop wlan.driver.name /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko - setprop wlan.supp.template /system/etc/wifi/wpa_supplicant_ath6kl.conf - btsoc="ath3k" -elif [ "$wlanchip" == "AR6004-SDIO" ]; then - setprop wlan.driver.ath 2 - setprop qcom.bluetooth.soc ath3k - setprop wlan.driver.name /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko - setprop wlan.supp.template /system/etc/wifi/wpa_supplicant_ath6kl.conf - btsoc="ath3k" - - # Chown polling nodes as needed from UI running on system server - chmod -h 0200 /sys/devices/msm_sdcc.1/polling - chmod -h 0200 /sys/devices/msm_sdcc.2/polling - chmod -h 0200 /sys/devices/msm_sdcc.3/polling - chmod -h 0200 /sys/devices/msm_sdcc.4/polling - - chown -h system.system /sys/devices/msm_sdcc.1/polling - chown -h system.system /sys/devices/msm_sdcc.2/polling - chown -h system.system /sys/devices/msm_sdcc.3/polling - chown -h system.system /sys/devices/msm_sdcc.4/polling -fi - diff --git a/rootdir/etc/init.qcom.rc b/rootdir/etc/init.qcom.rc index 4524cac..2736b6d 100755 --- a/rootdir/etc/init.qcom.rc +++ b/rootdir/etc/init.qcom.rc @@ -548,11 +548,6 @@ on property:bluetooth.startbtlogger=true on property:bluetooth.startbtlogger=false stop bt_logger -service qcom-c_core-sh /vendor/bin/init.qcom.class_core.sh - class core - user root - oneshot - service qcom-c_main-sh /vendor/bin/init.class_main.sh class main user root @@ -931,29 +926,12 @@ service qcom-sh /vendor/bin/init.qcom.sh user root oneshot -service crashdata-sh /vendor/bin/init.qcom.crashdata.sh - class late_start - user root - oneshot - service qcom-post-boot /vendor/bin/init.qcom.post_boot.sh class late_start user root disabled oneshot -service wifi-sdio-on /vendor/bin/init.qcom.sdio.sh - class late_start - group wifi inet - disabled - oneshot - -service wifi-crda /vendor/bin/init.crda.sh - class late_start - user root - disabled - oneshot - on property:sys.boot_completed=1 start qcom-post-boot @@ -265,22 +265,13 @@ PRODUCT_PACKAGES += \ init.goodix.sh \ init.msm.usb.configfs.rc \ init.qcom.early_boot.sh \ - init.qcom.class_core.sh \ - init.qcom.coex.sh \ - init.qcom.crashdata.sh \ - init.qcom.efs.sync.sh \ init.qcom.post_boot.sh \ init.qcom.rc \ init.qcom.sh \ - init.qcom.sdio.sh \ - init.qcom.syspart_fixup.sh \ init.qcom.usb.rc \ init.qcom.usb.sh \ - init.qcom.wifi.sh \ init.qti.fm.sh \ - init.qti.ims.sh \ init.target.rc \ - qca6234-service.sh \ ueventd.qcom.rc \ fstab.qcom |