diff options
| -rw-r--r-- | sdm660.mk | 4 | ||||
| -rw-r--r-- | sensors/hals.conf | 1 | ||||
| -rw-r--r-- | sensors/sensor_def_qcomdev.conf | 555 |
3 files changed, 0 insertions, 560 deletions
@@ -398,10 +398,6 @@ PRODUCT_PACKAGES += \ android.hardware.sensors@1.0-impl:64 \ android.hardware.sensors@1.0-service -PRODUCT_COPY_FILES += \ - $(COMMON_PATH)/sensors/hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \ - $(COMMON_PATH)/sensors/sensor_def_qcomdev.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/sensor_def_qcomdev.conf - # Shims PRODUCT_PACKAGES += \ libcamera_sdm660_shim diff --git a/sensors/hals.conf b/sensors/hals.conf deleted file mode 100644 index 5f3a14b..0000000 --- a/sensors/hals.conf +++ /dev/null @@ -1 +0,0 @@ -sensors.ssc.so diff --git a/sensors/sensor_def_qcomdev.conf b/sensors/sensor_def_qcomdev.conf deleted file mode 100644 index 9b7306a..0000000 --- a/sensors/sensor_def_qcomdev.conf +++ /dev/null @@ -1,555 +0,0 @@ -# -# File: sensor_def_qcomdev.conf -# -# Tihs file contains default sensor registry values for Qualcomm development -# test platforms. -# -# Copyright (c) 2013-2017 Qualcomm Technologies, Inc. -# All Rights Reserved. -# Confidential and Proprietary - Qualcomm Technologies, Inc. - - -# File format: -# -# Lines starting with "#" are comments and ignored. -# -# File metadata uses this format: -# :key value1 value2 -# -# The following keys are defined: -# - "version" : value1 is non-zero positive version number of the file. This -# number will be stored in the sensors registry. It should be equal to the -# largest version of any item. It will be saved in the sensors registry for -# later use when initializing values. See the item format below. -# This value should only be specified once in the file. -# -# - "hardware" : The value1 will be compared to the "Hardware" string from -# the property of ro.board.platform. -# Items will only be used as default values in the registry if the hardware -# string value is a substring of the ro.board.platform string. -# This metadata key can be used more than once, so that one file can support -# more than one type of hardware. -# The value may be NULL, indicating common item values for all hardware. -# Common conf entries for multiple hardware can be mentioned as below. -# configuration below this string is common for 8952,8956 and 8974 -# :hardware 8952 8956 8974 -# hardware list gets overwritten with the new one every time when "hardware" -# tag appears while parsing conf file. -# -# - "platform" : Similar to the "hardware" key, but this string will need to -# match the text of either /sys/devices/soc0/hw_platform or -# /sys/devices/soc0/platform_subtype. -# Common conf entries for multiple platform can be mentioned as below. -# configuration below this string is common for MTP and QRD -# :platfrom MTP QRD -# platform list gets overwritten with the new one every time when "platfrom" -# tag appears while parsing conf file. -# -# -# - "soc_id" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/soc_id. -# Common conf entries for multiple soc_id can be mentioned as below. -# configuration below this string is common for soc_id 264 and 278 -# :soc_id 264 278 -# soc_id list gets overwritten with the new one every time when "soc_id" -# tag appears while parsing conf file. -# -# - "subtype" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/platform_subtype. -# Common conf entries for multiple subtype can be mentioned as below. -# configuration below this string is common for subtype X and Y -# :subtype X Y -# subtype list gets overwritten with the new one every time when "subtype" -# tag appears while parsing conf file. -# -# - "sub_id" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/platform_subtype_id. -# Common conf entries for multiple sub_id can be mentioned as below. -# configuration below this string is common for sub_id -# :sub_id 0 10 -# sub_id list gets overwritten with the new one every time when "sub_id" -# tag appears while parsing conf file. -# -# - "soc_rev" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/revision. -# Common conf entries for multiple soc_rev can be mentioned as below. -# configuration below this string is common for soc_rev 1.0,2.0 and 3.0 -# :soc_rev 1.0 2.0 3.0 -# soc_rev list gets overwritten with the new one every time when "soc_rev" -# tag appears while parsing conf file. -# -# - "plat_ver" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/platform_version. -# Common conf entries for multiple plat_ver can be mentioned as below. -# configuration below this string is common for plat_ver 131072 and 1179648 -# :plat_ver 131072 1179648 -# plat_ver list gets overwritten with the new one every time when "plat_ver" -# tag appears while parsing conf file. -# -# - "property" : value1 is the Android system property key, and value2 is -# the desired property value. If the system property value matches the -# desired property value, then the following items will be applied. -# This metadata key can be used more than once, in which case the new -# property value overrides the old. -# value1 and 2 may be NULL, indicating common item values for all properties. -# -# Registry items are in lines with the following format: -# <itemID> <value> <version> -# Where: -# itemID is the numeric item ID defined in sns_reg_api_v02.h -# -# "value" is the numeric value of the item. -# -# "version" is a non-zero version of the item value. -# The version field will be compared against the previous saved -# value in the sensors registry. If this value is greater than the -# saved value, the default will be applied. Otherwise, the default -# will be skipped. -# -# Registry item values will only be applied if the hardware, platform, and -# property values match for the current hardware configuration. -# -# The numeric fields are parsed with the strtoull function, base 0. -# -:version 0x00010002 - -####################################################################### -### sdm660 Chipsets -####################################################################### -:hardware sdm660 -:platform -:property -:soc_id -:soc_rev -:subtype -# Orientation of sensors -# accel x/y/z -700 1 0x00010002 #accel-x-axis -701 -2 0x00010002 #accel-y-axis -702 -3 0x00010002 #accel-z-axis -# accel x/y/z -720 2 0x00010002 #accel-x-axis -721 -1 0x00010002 #accel-y-axis -722 -3 0x00010002 #accel-z-axis -# gyro x/y/z -800 1 0x00010002 #gyro-x-axis -801 -2 0x00010002 #gyro-y-axis -802 -3 0x00010002 #gyro-z-axis -# mag x/y/z -900 -2 0x00010002 #max-x-axis -901 -1 0x00010002 #mag-y-axis -902 -3 0x00010002 #mag-z-axis -# SSI SMGR Version -1900 1 0x00010002 #Maj Ver -1901 2 0x00010002 #Min Ver - -# SAM config -# -203 65536 0x10001 # AMD -225 983040 0x10001 # RMD -501 0x40 0x10001 # Gyro_cal_num_samp -504 65536 0x10001 # Gyro Cal -1703 65536 0x10001 # Ped -2800 983040 0x10001 # basic ges -2900 983040 0x10001 # Facing -3400 65536 0x10001 # CMC -609 983040 0x10001 # FMV -1005 983040 0x10001 # Grav -1103 983040 0x10001 # orientation -3000 983040 0x10001 # gyro quat -3100 983040 0x10001 # rot vec -3500 983040 0x10001 # game rv -4112 65536 0x10001 # SMD -4103 5 0x10001 # SMD_ACC_WIN_TIME - -#AMD parameters -200 0x000a0000 0x00010002 #AMD_ACC_SAMP_RATE_HZ_Q16 -201 0x00000cd2 0x00010002 #AMD_INT_cfg_prm1 -202 0x00008000 0x00010002 #AMD_INT_cfg_prm2 - -#RMD parameters -220 0x001e0000 0x00010002 #RMD_ACC_SAMP_RATE_HZ_Q16 -221 0x0001b333 0x00010002 #RMD_INT_cfg_prm1 -222 0x00003333 0x00010002 #RMD_INT_cfg_prm2 -223 0x00001657 0x00010002 #RMD_INT_cfg_prm3 -224 0x00003333 0x00010002 #RMD_INT_cfg_prm4 - -# SSI ACC SENSOR -2000 2 0x00010002 #auto detect -2001 3 0x00010002 #no. devices - -# SSI SMGR Cfg 0: ICM206xx [INVN ACCEL] -2002 0xc14075963795c661 0x00010002 #UUID -2003 0x0b25b8431bfd46bc 0x00010002 #UUID -2004 100000 0x00010002 #off_to_idle -2005 20000 0x00010002 #idle_to_ready -2006 68 0x00010002 #gpio1 [0xFFFF:Polling; 42(0x2A):Acc Interrupt Pin] -2007 1000 0x00010002 #reg_group_id -2008 0 0x00010002 #cal_grp_id -2009 3 0x00010002 #i2c_bus -2010 0x68 0x00010002 #i2c_address -2011 2 0x00010002 #sens_default -2012 0xD0 0x00010002 #flags [0:Polling; 0x80:DRI] -2068 0x83 0x00010002 #vdd [ LDO3B: 3V ] -2069 0x8E 0x00010002 #vddio [ LDO14A: 1.8V] - - -# SSI SMGR Cfg 1: BMI160 ACCEL -2013 0xd646cb83ec0cd5a5 0x00010002 #UUID -2014 0x0f4d0fd654c7eab5 0x00010002 #UUID -2015 30000 0x00010002 #off_to_idle -2016 0 0x00010002 #idle_to_ready -2017 68 0x00010002 #gpio1 -2018 1000 0x00010002 #reg_group_id -2019 0 0x00010002 #cal_grp_id -2020 3 0x00010002 #i2c_bus -2021 0x68 0x00010002 #i2c address -2022 4 0x00010002 #sens_defatult -2023 0xD0 0x00010002 #flag -2070 0x83 0x00010002 #vdd [ LDO3B: 3V ] -2071 0x8E 0x00010002 #vddio [ LDO14A: 1.8V] - -# SSI SMGR Cfg 1: lsm6dsm ACCEL -2024 0xbe48af52e826fd3c 0x00010002 #UUID -2025 0x68534cfc401dc2ac 0x00010002 #UUID -2026 100000 0x00010002 #off_to_idle -2027 250000 0x00010002 #idle_to_ready -2028 68 0x00010002 #gpio1 -2029 1001 0x00010002 #reg_group_id -2030 0 0x00010002 #cal_grp_id -2031 3 0x00010002 #i2c_bus -2032 0x6a 0x00010002 #i2c address -2033 4 0x00010002 #sens_defatult -2034 0xD0 0x00010002 #flag -2072 0x83 0x00010002 #vdd [ LDO3B: 3V ] -2073 0x8E 0x00010002 #vddio [ LDO14A: 1.8V] - - -# SSI G SENSOR -2100 2 0x00010002 #auto detect -2101 3 0x00010002 #no. devices - - - -# SSI SMGR Cfg 0: ICM206xx [INVN GYRO] -2102 0xc14075963795c661 0x00010002 #UUID -2103 0x0b25b8431bfd46bc 0x00010002 #UUID -2104 100000 0x00010002 #off_to_idle -2105 80000 0x00010002 #idle_to_ready -2106 69 0x00010002 #gpio1 [0xFFFF:Polling; 42(0x2A):Gyro Interrupt Pin] -2107 1010 0x00010002 #reg_group_id -2108 10 0x00010002 #cal_grp_id -2109 3 0x00010002 #i2c_bus -2110 0x68 0x00010002 #i2c_address -2111 3 0x00010002 #sens_default -2112 0xD0 0x00010002 #flags [0:Polling; 0x80:DRI] -2168 0x83 0x00010002 #vdd -2169 0x8E 0x00010002 #vddio - -# SSI SMGR Cfg 1: BMI160 GYRO -2113 0xd646cb83ec0cd5a5 0x00010002 #UUID -2114 0x0f4d0fd654c7eab5 0x00010002 #UUID -2115 30000 0x00010002 #off_to_idle -2116 0 0x00010002 #idle_to_ready -2117 69 0x00010002 #gpio1 -2118 1010 0x00010002 #reg_group_id -2119 10 0x00010002 #cal_grp_id -2120 3 0x00010002 #i2c_bus -2121 0x68 0x00010002 #i2c address -2122 4 0x00010002 #sens_defatult -2123 0xD0 0x00010002 #flag -2170 0x83 0x00010002 #vdd -2171 0x8E 0x00010002 #vddio - -# SSI SMGR Cfg 1: lsm6dsm GYRO -2124 0xbe48af52e826fd3c 0x00010002 #UUID -2125 0x68534cfc401dc2ac 0x00010002 #UUID -2126 100000 0x00010002 #off_to_idle -2127 250000 0x00010002 #idle_to_ready -2128 69 0x00010002 #gpio1 -2129 1010 0x00010002 #reg_group_id -2130 10 0x00010002 #cal_grp_id -2131 3 0x00010002 #i2c_bus -2132 0x6a 0x00010002 #i2c address -2133 4 0x00010002 #sens_defatult -2134 0xD0 0x00010002 #flag -2172 0x83 0x00010002 #vdd -2173 0x8E 0x00010002 #vddio - - -# SSI M SENSOR -2200 2 0x00010002 #auto detect -2201 1 0x00010002 #no. devices - -# SSI SMGR Cfg 0: AKM099xx_FIFO mag FIFO/DRI -2202 0x564d2b94fe80aef6 0x00010002 #UUID -2203 0x90611b98d561168f 0x00010002 #UUID -2204 3000 0x00010002 #off_to_idle -2205 10000 0x00010002 #idle_to_ready -2206 0xFFFF 0x00010002 #gpio1 -2207 1020 0x00010002 #reg_group_id -2208 0xFFFF 0x00010002 #cal_grp_id -2209 3 0x00010002 #i2c_bus -2210 0x0c 0x00010002 #i2c address -2211 0 0x00010002 #sens_defatult -2212 0 0x00010002 #flag -2268 0x83 0x00010002 #vdd -2269 0x8E 0x00010002 #vddio - -# SSI ALS/PS SENSOR -2300 2 0x00010002 #auto detect -2301 1 0x00010002 #no. devices - - - -# SSI SMGR Cfg 4: LTR578 DRI -2303 0x014101d151c1e1b1 0x00010002 #UUID should same to ADSP -2302 0xd141c181e101d1a1 0x00010002 #UUID -2304 3000 0x00010002 #off_to_idle -2305 10000 0x00010002 #idle_to_ready -2306 0xFFFF 0x00010002 #gpio1 -2307 1040 0x00010002 #reg_group_id -2308 0xFFFF 0x00010002 #cal_grp_id -2309 3 0x00010002 #i2c_bus -2310 0x53 0x00010002 #i2c_address -2311 0 0x00010002 #sens_default -2312 0x00 0x00010002 #flags -2368 0x83 0x00010002 #vdd -2369 0x8E 0x00010002 #vddio - -#pressure sensor -2400 2 0x00010002 #min ver -2401 1 0x00010002 #uuid number - -# SSI SMGR Cfg 3: BMP285 pressure POLL -2403 0x32c31ec17f1c0abd 0x00010002 #UUID -2402 0x5c473990a806b072 0x00010002 #UUID -2404 5000 0x00010002 #off_to_idle -2405 50000 0x00010002 #idle_to_ready -2406 0xFFFF 0x00010002 #gpio1 -2407 0xFFFF 0x00010002 #reg_group_id -2408 0xFFFF 0x00010002 #cal_grp_id -2409 3 0x00010002 #i2c_bus -2410 0x76 0x00010002 #i2c_address -2411 0 0x00010002 #sens_default -2412 0 0x00010002 #flags -2468 0x8E 0x00010002 #vdd -2469 0x8E 0x00010002 #vddio - -# SSI SMGR Version -3600 1 0x00010002 #Maj Ver -3601 2 0x00010002 #Min Ver - -# -# SSI GPIO configuration -#----------------------------- -2700 1 0x00010002 #maj ver -2701 0 0x00010002 #min ver -2706 0xFFFF 0x00010002 #RESET pin - -# Mag Cal config -#----------------------------- -3801 1 0x00010002 -3804 0x000a0000 0x10001 #Sample Rate - -# -# IOD AUTOCAL configuration -#----------------------------- -6000 1 0x00010002 #version -6001 1 0x00010002 #converge staus -6002 0x3F86CBFB 0x00010002 #coefficient - -# -# SSC GPIO CFG (Unused) -#----------------------------- -# -6300 1 0x00010002 # version -6301 0x0104 0x00010002 # gpio num -6302 2 0x00010002 # active func sel -6303 1 0x00010002 # active dir -6304 0 0x00010002 # active pull -6305 3 0x00010002 # active drive -6306 2 0x00010002 # inactive func sel -6307 0 0x00010002 # inactive dir -6308 2 0x00010002 # inactive pull -6309 3 0x00010002 # inactive drive - -6310 1 0x00010002 # version -6311 0x0105 0x00010002 # gpio num -6312 2 0x00010002 # active func sel -6313 1 0x00010002 # active dir -6314 0 0x00010002 # active pull -6315 3 0x00010002 # active drive -6316 2 0x00010002 # inactive func sel -6317 0 0x00010002 # inactive dir -6318 2 0x00010002 # inactive pull -6319 3 0x00010002 # inactive drive - -6320 1 0x00010002 # version -6321 0x0106 0x00010002 # gpio num -6322 2 0x00010002 # active func sel -6323 1 0x00010002 # active dir -6324 0 0x00010002 # active pull -6325 3 0x00010002 # active drive -6326 2 0x00010002 # inactive func sel -6327 0 0x00010002 # inactive dir -6328 2 0x00010002 # inactive pull -6329 3 0x00010002 # inactive drive - -6330 1 0x00010002 # version -6331 0x0107 0x00010002 # gpio num -6332 2 0x00010002 # active func sel -6333 0 0x00010002 # active dir -6334 0 0x00010002 # active pull -6335 3 0x00010002 # active drive -6336 2 0x00010002 # inactive func sel -6337 0 0x00010002 # inactive dir -6338 2 0x00010002 # inactive pull -6339 3 0x00010002 # inactive drive - -6340 1 0x00010002 # version -6341 0x010C 0x00010002 # gpio num -6342 1 0x00010002 # active func sel -6343 1 0x00010002 # active dir -6344 0 0x00010002 # active pull -6345 3 0x00010002 # active drive -6346 1 0x00010002 # inactive func sel -6347 0 0x00010002 # inactive dir -6348 2 0x00010002 # inactive pull -6349 3 0x00010002 # inactive drive - -6350 1 0x00010002 # version -6351 0x010D 0x00010002 # gpio num -6352 1 0x00010002 # active func sel -6353 0 0x00010002 # active dir -6354 0 0x00010002 # active pull -6355 3 0x00010002 # active drive -6356 1 0x00010002 # inactive func sel -6357 0 0x00010002 # inactive dir -6358 2 0x00010002 # inactive pull -6359 3 0x00010002 # inactive drive - -6360 1 0x00010002 # version -6361 0x010E 0x00010002 # gpio num -6362 1 0x00010002 # active func sel -6363 1 0x00010002 # active dir -6364 0 0x00010002 # active pull -6365 3 0x00010002 # active drive -6366 1 0x00010002 # inactive func sel -6367 0 0x00010002 # inactive dir -6368 2 0x00010002 # inactive pull -6369 3 0x00010002 # inactive drive - -6490 1 0x00010002 # version -6491 0x010F 0x00010002 # gpio num -6492 1 0x00010002 # active func sel -6493 0 0x00010002 # active dir -6494 0 0x00010002 # active pull -6495 3 0x00010002 # active drive -6496 1 0x00010002 # inactive func sel -6497 0 0x00010002 # inactive dir -6498 2 0x00010002 # inactive pull -6499 3 0x00010002 # inactive drive - -6370 1 0x00010002 # version -6371 0x0110 0x00010002 # gpio num -6372 1 0x00010002 # active func sel -6373 1 0x00010002 # active dir -6374 0 0x00010002 # active pull -6375 3 0x00010002 # active drive -6376 1 0x00010002 # inactive func sel -6377 0 0x00010002 # inactive dir -6378 2 0x00010002 # inactive pull -6379 3 0x00010002 # inactive drive - -6380 1 0x00010002 # version -6381 0x0111 0x00010002 # gpio num -6382 1 0x00010002 # active func sel -6383 1 0x00010002 # active dir -6384 0 0x00010002 # active pull -6385 3 0x00010002 # active drive -6386 1 0x00010002 # inactive func sel -6387 0 0x00010002 # inactive dir -6388 2 0x00010002 # inactive pull -6389 3 0x00010002 # inactive drive - -# -# SSC GPIO CFG (Used) -#----------------------------- -6420 1 0x00010002 # version -6421 0x0100 0x00010002 # gpio num -6422 1 0x00010002 # active func sel -6423 1 0x00010002 # active dir -6424 0 0x00010002 # active pull -6425 0 0x00010002 # active drive -6426 1 0x00010002 # inactive func sel -6427 0 0x00010002 # inactive dir -6428 2 0x00010002 # inactive pull -6429 0 0x00010002 # inactive drive - -6430 1 0x00010002 # version -6431 0x0102 0x00010002 # gpio num -6432 1 0x00010002 # active func sel -6433 1 0x00010002 # active dir -6434 0 0x00010002 # active pull -6435 0 0x00010002 # active drive -6436 1 0x00010002 # inactive func sel -6437 0 0x00010002 # inactive dir -6438 2 0x00010002 # inactive pull -6439 0 0x00010002 # inactive drive - -6440 1 0x00010002 # version -6441 0x0103 0x00010002 # gpio num -6442 1 0x00010002 # active func sel -6443 1 0x00010002 # active dir -6444 0 0x00010002 # active pull -6445 0 0x00010002 # active drive -6446 1 0x00010002 # inactive func sel -6447 0 0x00010002 # inactive dir -6448 2 0x00010002 # inactive pull -6449 0 0x00010002 # inactive drive - -6450 1 0x00010002 # version -6451 0x0108 0x00010002 # gpio num -6452 1 0x00010002 # active func sel -6453 1 0x00010002 # active dir -6454 0 0x00010002 # active pull -6455 3 0x00010002 # active drive -6456 1 0x00010002 # inactive func sel -6457 0 0x00010002 # inactive dir -6458 2 0x00010002 # inactive pull -6459 3 0x00010002 # inactive drive - -6460 1 0x00010002 # version -6461 0x0109 0x00010002 # gpio num -6462 1 0x00010002 # active func sel -6463 1 0x00010002 # active dir -6464 0 0x00010002 # active pull -6465 3 0x00010002 # active drive -6466 1 0x00010002 # inactive func sel -6467 0 0x00010002 # inactive dir -6468 2 0x00010002 # inactive pull -6469 3 0x00010002 # inactive drive - -6470 1 0x00010002 # version -6471 0x010A 0x00010002 # gpio num -6472 1 0x00010002 # active func sel -6473 1 0x00010002 # active dir -6474 0 0x00010002 # active pull -6475 3 0x00010002 # active drive -6476 1 0x00010002 # inactive func sel -6477 0 0x00010002 # inactive dir -6478 2 0x00010002 # inactive pull -6479 3 0x00010002 # inactive drive - -6480 1 0x00010002 # version -6481 0x010B 0x00010002 # gpio num -6482 1 0x00010002 # active func sel -6483 0 0x00010002 # active dir -6484 0 0x00010002 # active pull -6485 3 0x00010002 # active drive -6486 1 0x00010002 # inactive func sel -6487 0 0x00010002 # inactive dir -6488 2 0x00010002 # inactive pull -6489 3 0x00010002 # inactive drive - |