wayne: Initial bringup

Change-Id: I211da5781d8c7a16199fd8a18e1b00cfc9e01944
Signed-off-by: Isaac Chen <isaacchen@isaacchen.cn>

2 files changed, 627 insertions, 0 deletions

diff --git a/sensors/hals.conf b/sensors/hals.conf
index 5f3a14b..5f3a14b 100755..100644
--- a/sensors/hals.conf
+++ b/sensors/hals.conf
diff --git a/sensors/sensor_def_qcomdev.conf b/sensors/sensor_def_qcomdev.conf
new file mode 100644
index 0000000..0cc8724
--- /dev/null
+++ b/sensors/sensor_def_qcomdev.conf
@@ -0,0 +1,627 @@
+#
+# File: sensor_def_qcomdev.conf
+#
+# Tihs file contains default sensor registry values for Qualcomm development
+# test platforms.
+#
+#  Copyright (c) 2013-2016 Qualcomm Technologies, Inc.
+#  All Rights Reserved.
+#  Confidential and Proprietary - Qualcomm Technologies, Inc.
+
+
+# File format:
+#
+# Lines starting with "#" are comments and ignored.
+#
+# File metadata uses this format:
+# :key value1 value2
+#
+# The following keys are defined:
+# - "version" : value1 is non-zero positive version number of the file. This
+#   number will be stored in the sensors registry. It should be equal to the
+#   largest version of any item. It will be saved in the sensors registry for
+#   later use when initializing values. See the item format below.
+#   This value should only be specified once in the file.
+#
+# - "hardware" : The value1 will be compared to the "Hardware" string from
+#   the property of ro.board.platform.
+#   Items will only be used as default values in the registry if the hardware
+#   string value is a substring of the ro.board.platform string.
+#   This metadata key can be used more than once, so that one file can support
+#   more than one type of hardware.
+#   The value may be NULL, indicating common item values for all hardware.
+#   Common conf entries for multiple hardware can be mentioned as below.
+#   configuration below this string is common for 8952,8956 and 8974
+#   :hardware 8952 8956 8974
+#   hardware list gets overwritten with the new one every time when "hardware"
+#   tag appears while parsing conf file.
+#
+# - "platform" : Similar to the "hardware" key, but this string will need to
+#   match the text of either /sys/devices/soc0/hw_platform or
+#   /sys/devices/soc0/platform_subtype.
+#   Common conf entries for multiple platform can be mentioned as below.
+#   configuration below this string is common for MTP and QRD
+#   :platfrom MTP QRD
+#   platform list gets overwritten with the new one every time when "platfrom"
+#   tag appears while parsing conf file.
+#
+#
+# - "soc_id" : Similar to the "hardware" key, but this string will need to
+#   match the text of /sys/devices/soc0/soc_id.
+#   Common conf entries for multiple soc_id can be mentioned as below.
+#   configuration below this string is common for soc_id 264 and 278
+#   :soc_id 264 278
+#   soc_id list gets overwritten with the new one every time when "soc_id"
+#   tag appears while parsing conf file.
+#
+# - "subtype" : Similar to the "hardware" key, but this string will need to
+#   match the text of /sys/devices/soc0/platform_subtype.
+#   Common conf entries for multiple subtype can be mentioned as below.
+#   configuration below this string is common for subtype X and Y
+#   :subtype X Y
+#   subtype list gets overwritten with the new one every time when "subtype"
+#   tag appears while parsing conf file.
+#
+# - "sub_id" : Similar to the "hardware" key, but this string will need to
+#   match the text of /sys/devices/soc0/platform_subtype_id.
+#   Common conf entries for multiple sub_id can be mentioned as below.
+#   configuration below this string is common for sub_id
+#   :sub_id 0 10
+#   sub_id list gets overwritten with the new one every time when "sub_id"
+#   tag appears while parsing conf file.
+#
+# - "soc_rev" : Similar to the "hardware" key, but this string will need to
+#   match the text of /sys/devices/soc0/revision.
+#   Common conf entries for multiple soc_rev can be mentioned as below.
+#   configuration below this string is common for soc_rev 1.0,2.0 and 3.0
+#   :soc_rev 1.0 2.0 3.0
+#   soc_rev list gets overwritten with the new one every time when "soc_rev"
+#   tag appears while parsing conf file.
+#
+# - "plat_ver" : Similar to the "hardware" key, but this string will need to
+#   match the text of /sys/devices/soc0/platform_version.
+#   Common conf entries for multiple plat_ver can be mentioned as below.
+#   configuration below this string is common for plat_ver 131072 and 1179648
+#   :plat_ver 131072 1179648
+#   plat_ver list gets overwritten with the new one every time when "plat_ver"
+#   tag appears while parsing conf file.
+#
+# - "property" : value1 is the Android system property key, and value2 is
+#   the desired property value. If the system property value matches the
+#   desired property value, then the following items will be applied.
+#   This metadata key can be used more than once, in which case the new
+#   property value overrides the old.
+#   value1 and 2 may be NULL, indicating common item values for all properties.
+#
+# Registry items are in lines with the following format:
+# <itemID>  <value>  <version>
+#  Where:
+#   itemID is the numeric item ID defined in sns_reg_api_v02.h
+#
+#   "value" is the numeric value of the item.
+#
+#   "version" is a non-zero version of the item value.
+#             The version field will be compared against the previous saved
+#             value in the sensors registry. If this value is greater than the
+#             saved value, the default will be applied. Otherwise, the default
+#             will be skipped.
+#
+# Registry item values will only be applied if the hardware, platform, and
+# property values match for the current hardware configuration.
+#
+# The numeric fields are parsed with the strtoull function, base 0.
+#
+
+:version 0x00010001
+#######################################################################
+###        sdm660 Chipsets
+#######################################################################
+:hardware sdm660
+:platform
+:property
+:soc_id
+:soc_rev
+:subtype
+# Orientation of sensors
+# accel x/y/z
+700  1 0x00010001 #accel-x-axis
+701  -2 0x00010001 #accel-y-axis
+702 -3 0x00010001 #accel-z-axis
+# accel x/y/z
+720  2 0x00010001 #accel-x-axis
+721  -1 0x00010001 #accel-y-axis
+722 -3 0x00010001 #accel-z-axis
+# gyro x/y/z
+800  1 0x00010001 #gyro-x-axis
+801  -2 0x00010001 #gyro-y-axis
+802 -3 0x00010001 #gyro-z-axis
+# mag x/y/z
+900 -2 0x00010001 #max-x-axis
+901  -1 0x00010001 #mag-y-axis
+902  -3 0x00010001 #mag-z-axis
+# SSI SMGR Version
+1900 0 0x00010001 #Maj Ver
+1901 2 0x00010001 #Min Ver
+
+# SAM config
+#
+203  65536   0x10001 # AMD
+225  983040  0x10001 # RMD
+504  65536   0x10001 # Gyro Cal
+1703 65536   0x10001 # Ped
+2800 983040  0x10001 # basic ges
+2900 983040  0x10001 # Facing
+3400 65536   0x10001 # CMC
+609  983040  0x10001 # FMV
+1005 983040  0x10001 # Grav
+1103 983040  0x10001 # orientation
+3000 983040  0x10001 # gyro quat
+3100 983040  0x10001 # rot vec
+3500 983040  0x10001 # game rv
+4112 65536   0x10001 # SMD
+4103 5 0x10001 # SMD_ACC_WIN_TIME
+
+#AMD parameters
+200 0x000a0000 0x00010001 #AMD_ACC_SAMP_RATE_HZ_Q16
+201 0x00000cd2 0x00010001 #AMD_INT_cfg_prm1
+202 0x00008000 0x00010001 #AMD_INT_cfg_prm2
+
+#RMD parameters
+220 0x001e0000 0x00010001 #RMD_ACC_SAMP_RATE_HZ_Q16
+221 0x0001b333 0x00010001 #RMD_INT_cfg_prm1
+222 0x00003333 0x00010001 #RMD_INT_cfg_prm2
+223 0x00001657 0x00010001 #RMD_INT_cfg_prm3
+224 0x00003333 0x00010001 #RMD_INT_cfg_prm4
+
+# SSI ACC SENSOR
+2000 2 0x00010001               #auto detect
+2001 3 0x00010001               #no. devices
+
+# SSI SMGR Cfg 0: ICM206xx [INVN ACCEL]
+2002 0xc14075963795c661 0x00010001 #UUID
+2003 0x0b25b8431bfd46bc 0x00010001 #UUID
+2004 100000 0x00010001             #off_to_idle
+2005 20000 0x00010001              #idle_to_ready
+2006 68 0x00010001                 #gpio1 [0xFFFF:Polling; 42(0x2A):Acc Interrupt Pin]
+2007 1000 0x00010001               #reg_group_id
+2008 0 0x00010001                  #cal_grp_id
+2009 3 0x00010001                  #i2c_bus
+2010 0x68 0x00010001               #i2c_address
+2011 2 0x00010001                  #sens_default
+2012 0xD0 0x00010001               #flags [0:Polling; 0x80:DRI]
+2068 0x83 0x00010001               #vdd [ LDO3B: 3V ]
+2069 0x8E 0x00010001               #vddio [ LDO14A: 1.8V]
+
+
+# SSI SMGR Cfg 1: BMI160 ACCEL
+2013 0xd646cb83ec0cd5a5 0x00010001 #UUID
+2014 0x0f4d0fd654c7eab5 0x00010001 #UUID
+2015 30000 0x00010001              #off_to_idle
+2016 0 0x00010001                  #idle_to_ready
+2017 68 0x00010001                 #gpio1
+2018 1000 0x00010001               #reg_group_id
+2019 0 0x00010001                  #cal_grp_id
+2020 3 0x00010001                  #i2c_bus
+2021 0x68 0x00010001               #i2c address
+2022 4 0x00010001                  #sens_defatult
+2023 0xD0 0x00010001               #flag
+2070 0x83 0x00010001               #vdd [ LDO3B: 3V ]
+2071 0x8E 0x00010001               #vddio [ LDO14A: 1.8V]
+
+# SSI SMGR Cfg 1: lsm6dsm ACCEL
+2024 0xbe48af52e826fd3c 0x00010001 #UUID
+2025 0x68534cfc401dc2ac 0x00010001 #UUID
+2026 100000 0x00010001             #off_to_idle
+2027 250000 0x00010001             #idle_to_ready
+2028 68 0x00010001                 #gpio1
+2029 1001 0x00010001               #reg_group_id
+2030 0 0x00010001                  #cal_grp_id
+2031 3 0x00010001                  #i2c_bus
+2032 0x6a 0x00010001               #i2c address
+2033 4 0x00010001                  #sens_defatult
+2034 0xD0 0x00010001               #flag
+2072 0x83 0x00010001               #vdd [ LDO3B: 3V ]
+2073 0x8E 0x00010001               #vddio [ LDO14A: 1.8V]
+
+
+# SSI G SENSOR
+2100 2 0x00010001               #auto detect
+2101 3 0x00010001               #no. devices
+
+
+
+# SSI SMGR Cfg 0: ICM206xx [INVN GYRO]
+2102 0xc14075963795c661 0x00010001 #UUID
+2103 0x0b25b8431bfd46bc 0x00010001 #UUID
+2104 100000 0x00010001             #off_to_idle
+2105 80000 0x00010001              #idle_to_ready
+2106 69 0x00010001                 #gpio1 [0xFFFF:Polling; 42(0x2A):Gyro Interrupt Pin]
+2107 1010 0x00010001               #reg_group_id
+2108 10 0x00010001                 #cal_grp_id
+2109 3 0x00010001                  #i2c_bus
+2110 0x68 0x00010001               #i2c_address
+2111 3 0x00010001                  #sens_default
+2112 0xD0 0x00010001               #flags [0:Polling; 0x80:DRI]
+2168 0x83 0x00010001               #vdd
+2169 0x8E 0x00010001               #vddio
+
+# SSI SMGR Cfg 1: BMI160 GYRO
+2113 0xd646cb83ec0cd5a5 0x00010001 #UUID
+2114 0x0f4d0fd654c7eab5 0x00010001 #UUID
+2115 30000 0x00010001              #off_to_idle
+2116 0 0x00010001                  #idle_to_ready
+2117 69 0x00010001                 #gpio1
+2118 1010 0x00010001               #reg_group_id
+2119 10 0x00010001                 #cal_grp_id
+2120 3 0x00010001                  #i2c_bus
+2121 0x68 0x00010001               #i2c address
+2122 4 0x00010001                  #sens_defatult
+2123 0xD0 0x00010001               #flag
+2170 0x83 0x00010001               #vdd
+2171 0x8E 0x00010001               #vddio
+
+# SSI SMGR Cfg 1: lsm6dsm GYRO
+2124 0xbe48af52e826fd3c 0x00010001 #UUID
+2125 0x68534cfc401dc2ac 0x00010001 #UUID
+2126 100000 0x00010001             #off_to_idle
+2127 250000 0x00010001             #idle_to_ready
+2128 69 0x00010001                 #gpio1
+2129 1010 0x00010001               #reg_group_id
+2130 10 0x00010001                 #cal_grp_id
+2131 3 0x00010001                  #i2c_bus
+2132 0x6a 0x00010001               #i2c address
+2133 4 0x00010001                  #sens_defatult
+2134 0xD0 0x00010001               #flag
+2172 0x83 0x00010001               #vdd
+2173 0x8E 0x00010001               #vddio
+
+
+# SSI M SENSOR
+2200 2 0x00010001               #auto detect
+2201 1 0x00010001               #no. devices
+
+# SSI SMGR Cfg 0: AKM099xx_FIFO mag FIFO/DRI
+2202 0x564d2b94fe80aef6 0x00010001 #UUID
+2203 0x90611b98d561168f 0x00010001 #UUID
+2204 3000 0x00010001               #off_to_idle
+2205 10000 0x00010001              #idle_to_ready
+2206 0xFFFF 0x00010001             #gpio1
+2207 1020 0x00010001               #reg_group_id
+2208 0xFFFF 0x00010001             #cal_grp_id
+2209 3 0x00010001                  #i2c_bus
+2210 0x0c 0x00010001               #i2c address
+2211 0 0x00010001                  #sens_defatult
+2212 0 0x00010001                  #flag
+2268 0x83 0x00010001               #vdd
+2269 0x8E 0x00010001               #vddio
+
+# SSI ALS/PS SENSOR
+2300 2 0x00010001               #auto detect
+2301 2 0x00010001               #no. devices
+
+
+
+# SSI SMGR Cfg 4: LTR578  DRI
+2303 0x014101d151c1e1b1 0x00010001 #UUID should same to ADSP
+2302 0xd141c181e101d1a1 0x00010001 #UUID
+2304 3000 0x00010001               #off_to_idle
+2305 10000 0x00010001                  #idle_to_ready
+2306 0xFFFF 0x00010001             #gpio1
+2307 1040 0x00010001               #reg_group_id
+2308 0xFFFF 0x00010001             #cal_grp_id
+2309 3 0x00010001                  #i2c_bus
+2310 0x53 0x00010001               #i2c_address
+2311 0 0x00010001                  #sens_default
+2312 0x00 0x00010001               #flags
+2368 0x83 0x00010001                   #vdd
+2369 0x8E 0x00010001                   #vddio
+
+# SSI SMGR Cfg 4: STK3X1X  DRI
+2314 0x8b11a21aa55e6586 0x00010001 #UUID should same to ADSP
+2313 0xa4524f726702e351 0x00010001 #UUID
+2315 7500 0x00010001               #off_to_idle
+2316 10000 0x00010001                  #idle_to_ready
+2317 0xFFFF 0x00010001             #gpio1
+2318 1040 0x00010001               #reg_group_id
+2319 0xFFFF 0x00010001             #cal_grp_id
+2320 3 0x00010001                  #i2c_bus
+2321 0x48 0x00010001               #i2c_address
+2322 0 0x00010001                  #sens_default
+2323 0x00 0x00010001               #flags
+2370 0x83 0x00010001                   #vdd
+2371 0x8E 0x00010001                   #vddio
+
+#pressure sensor
+2400 2 0x00010001             #min ver
+2401 1 0x00010001             #uuid number
+
+# SSI SMGR Cfg 3: BMP285 pressure POLL
+2403 0x32c31ec17f1c0abd 0x00010001 #UUID
+2402 0x5c473990a806b072 0x00010001 #UUID
+2404 5000 0x00010001               #off_to_idle
+2405 50000 0x00010001              #idle_to_ready
+2406 0xFFFF 0x00010001             #gpio1
+2407 0xFFFF 0x00010001             #reg_group_id
+2408 0xFFFF 0x00010001             #cal_grp_id
+2409 3 0x00010001                  #i2c_bus
+2410 0x76 0x00010001               #i2c_address
+2411 0 0x00010001                  #sens_default
+2412 0 0x00010001                  #flags
+2468 0x8E 0x00010001               #vdd
+2469 0x8E 0x00010001               #vddio
+
+
+# SSI SMGR Version
+3600 1 0x00010001 #Maj Ver
+3601 2 0x00010001 #Min Ver
+
+#RGB sensor
+4300 2 0x00010001             #min ver
+4301 1 0x00010001             #uuid number
+
+# SSI SMGR Cfg 5: TMG490X RGB DRI
+4303 0x3a83587c79f2d5ad 0x00010001 #UUID
+4302 0xd24fdac0d73b50aa 0x00010001 #UUID
+4304 5700 0x00010001               #off_to_idle
+4305 5000 0x00010001               #idle_to_ready
+4306 0xFFFF 0x00010001             #gpio1
+4307 0xFFFF 0x00010001             #reg_group_id
+4308 0xFFFF 0x00010001             #cal_grp_id
+4309 3 0x00010001                  #i2c_bus
+4310 0x39 0x00010001               #i2c_address
+4311 0 0x00010001                  #sens_default
+4312 0x80 0x00010001               #flags
+4368 0x83 0x00010001               #vdd
+4369 0x8E 0x00010001               #vddio
+
+#Humidity sensor
+4200 2 0x00010001             #min ver
+4201 1 0x00010001             #uuid number
+## SSI SMGR Cfg 6: SHTW1 Humidity Onchange
+4203 0xcc631478716da795 0x00010001 #UUID
+4202 0x40410cafc67cfbbe 0x00010001 #UUID
+4204 10000 0x00010001              #off_to_idle
+4205 10000 0x00010001              #idle_to_ready
+4206 0xFFFF 0x00010001             #gpio1
+4207 0xFFFF 0x00010001             #reg_group_id
+4208 0xFFFF 0x00010001             #cal_grp_id
+4209 3 0x00010001                  #i2c_bus
+4210 0x70 0x00010001               #i2c_address
+4211 0 0x00010001                  #sens_default
+4212 0x80 0x00010001               #flags
+4268 1 0x00010001                  #device_select
+4269 0x8E 0x00010001               #vdd
+
+# Hall Effect BU52053NVX DRI
+4700 2 0x00010001             #min ver
+4701 1 0x00010001             #uuid number
+
+## SSI SMGR Cfg 7: Hall Effect BU52053NVX DRI
+4703 0x5da5cb55d3c7bd84 0x00010001 #UUID
+4702 0x7e412494d22ec81e 0x00010001 #UUID
+4704 100 0x00010001                #off_to_idle
+4705 100 0x00010001                #idle_to_ready
+4706 0xFFFF 0x00010001             #gpio1
+4707 0xFFFF 0x00010001             #reg_group_id
+4708 0xFFFF 0x00010001             #cal_grp_id
+4709 3 0x00010001                  #i2c_bus
+4710 0x20 0x00010001               #i2c_address, dummy
+4711 0 0x00010001                  #sens_default
+4712 0x80 0x00010001               #flags
+4768 0x8E 0x00010001               #vdd
+4769 0x8E 0x00010001               #vddio
+
+#
+# SSI GPIO configuration
+#-----------------------------
+2700  1 0x00010001      #maj ver
+2701  0 0x00010001      #min ver
+2706  0xFFFF 0x00010001 #RESET pin
+
+# Mag Cal config
+#-----------------------------
+3801 1 0x00010001
+3804 0x000a0000 0x10001          #Sample Rate
+
+#
+# IOD AUTOCAL configuration
+#-----------------------------
+6000  1           0x00010001    #version
+6001  1           0x00010001    #converge staus
+6002  0x3F86CBFB  0x00010001    #coefficient
+
+#
+# SSC GPIO CFG (Unused)
+#-----------------------------
+#
+6300       1 0x00010001 # version
+6301  0x0104 0x00010001 # gpio num
+6302       2 0x00010001 # active func sel
+6303       1 0x00010001 # active dir
+6304       0 0x00010001 # active pull
+6305       3 0x00010001 # active drive
+6306       2 0x00010001 # inactive func sel
+6307       0 0x00010001 # inactive dir
+6308       2 0x00010001 # inactive pull
+6309       3 0x00010001 # inactive drive
+
+6310       1 0x00010001 # version
+6311  0x0105 0x00010001 # gpio num
+6312       2 0x00010001 # active func sel
+6313       1 0x00010001 # active dir
+6314       0 0x00010001 # active pull
+6315       3 0x00010001 # active drive
+6316       2 0x00010001 # inactive func sel
+6317       0 0x00010001 # inactive dir
+6318       2 0x00010001 # inactive pull
+6319       3 0x00010001 # inactive drive
+
+6320       1 0x00010001 # version
+6321  0x0106 0x00010001 # gpio num
+6322       2 0x00010001 # active func sel
+6323       1 0x00010001 # active dir
+6324       0 0x00010001 # active pull
+6325       3 0x00010001 # active drive
+6326       2 0x00010001 # inactive func sel
+6327       0 0x00010001 # inactive dir
+6328       2 0x00010001 # inactive pull
+6329       3 0x00010001 # inactive drive
+
+6330       1 0x00010001 # version
+6331  0x0107 0x00010001 # gpio num
+6332       2 0x00010001 # active func sel
+6333       0 0x00010001 # active dir
+6334       0 0x00010001 # active pull
+6335       3 0x00010001 # active drive
+6336       2 0x00010001 # inactive func sel
+6337       0 0x00010001 # inactive dir
+6338       2 0x00010001 # inactive pull
+6339       3 0x00010001 # inactive drive
+
+6340       1 0x00010001 # version
+6341  0x010C 0x00010001 # gpio num
+6342       1 0x00010001 # active func sel
+6343       1 0x00010001 # active dir
+6344       0 0x00010001 # active pull
+6345       3 0x00010001 # active drive
+6346       1 0x00010001 # inactive func sel
+6347       0 0x00010001 # inactive dir
+6348       2 0x00010001 # inactive pull
+6349       3 0x00010001 # inactive drive
+
+6350       1 0x00010001 # version
+6351  0x010D 0x00010001 # gpio num
+6352       1 0x00010001 # active func sel
+6353       0 0x00010001 # active dir
+6354       0 0x00010001 # active pull
+6355       3 0x00010001 # active drive
+6356       1 0x00010001 # inactive func sel
+6357       0 0x00010001 # inactive dir
+6358       2 0x00010001 # inactive pull
+6359       3 0x00010001 # inactive drive
+
+6360       1 0x00010001 # version
+6361  0x010E 0x00010001 # gpio num
+6362       1 0x00010001 # active func sel
+6363       1 0x00010001 # active dir
+6364       0 0x00010001 # active pull
+6365       3 0x00010001 # active drive
+6366       1 0x00010001 # inactive func sel
+6367       0 0x00010001 # inactive dir
+6368       2 0x00010001 # inactive pull
+6369       3 0x00010001 # inactive drive
+
+6490       1 0x00010001 # version
+6491  0x010F 0x00010001 # gpio num
+6492       1 0x00010001 # active func sel
+6493       0 0x00010001 # active dir
+6494       0 0x00010001 # active pull
+6495       3 0x00010001 # active drive
+6496       1 0x00010001 # inactive func sel
+6497       0 0x00010001 # inactive dir
+6498       2 0x00010001 # inactive pull
+6499       3 0x00010001 # inactive drive
+
+6370       1 0x00010001 # version
+6371  0x0110 0x00010001 # gpio num
+6372       1 0x00010001 # active func sel
+6373       1 0x00010001 # active dir
+6374       0 0x00010001 # active pull
+6375       3 0x00010001 # active drive
+6376       1 0x00010001 # inactive func sel
+6377       0 0x00010001 # inactive dir
+6378       2 0x00010001 # inactive pull
+6379       3 0x00010001 # inactive drive
+
+6380       1 0x00010001 # version
+6381  0x0111 0x00010001 # gpio num
+6382       1 0x00010001 # active func sel
+6383       1 0x00010001 # active dir
+6384       0 0x00010001 # active pull
+6385       3 0x00010001 # active drive
+6386       1 0x00010001 # inactive func sel
+6387       0 0x00010001 # inactive dir
+6388       2 0x00010001 # inactive pull
+6389       3 0x00010001 # inactive drive
+
+#
+# SSC GPIO CFG (Used)
+#-----------------------------
+6420       1 0x00010001 # version
+6421  0x0100 0x00010001 # gpio num
+6422       1 0x00010001 # active func sel
+6423       1 0x00010001 # active dir
+6424       0 0x00010001 # active pull
+6425       0 0x00010001 # active drive
+6426       1 0x00010001 # inactive func sel
+6427       0 0x00010001 # inactive dir
+6428       2 0x00010001 # inactive pull
+6429       0 0x00010001 # inactive drive
+
+6430       1 0x00010001 # version
+6431  0x0102 0x00010001 # gpio num
+6432       1 0x00010001 # active func sel
+6433       1 0x00010001 # active dir
+6434       0 0x00010001 # active pull
+6435       0 0x00010001 # active drive
+6436       1 0x00010001 # inactive func sel
+6437       0 0x00010001 # inactive dir
+6438       2 0x00010001 # inactive pull
+6439       0 0x00010001 # inactive drive
+
+6440       1 0x00010001 # version
+6441  0x0103 0x00010001 # gpio num
+6442       1 0x00010001 # active func sel
+6443       1 0x00010001 # active dir
+6444       0 0x00010001 # active pull
+6445       0 0x00010001 # active drive
+6446       1 0x00010001 # inactive func sel
+6447       0 0x00010001 # inactive dir
+6448       2 0x00010001 # inactive pull
+6449       0 0x00010001 # inactive drive
+
+6450       1 0x00010001 # version
+6451  0x0108 0x00010001 # gpio num
+6452       1 0x00010001 # active func sel
+6453       1 0x00010001 # active dir
+6454       0 0x00010001 # active pull
+6455       3 0x00010001 # active drive
+6456       1 0x00010001 # inactive func sel
+6457       0 0x00010001 # inactive dir
+6458       2 0x00010001 # inactive pull
+6459       3 0x00010001 # inactive drive
+
+6460       1 0x00010001 # version
+6461  0x0109 0x00010001 # gpio num
+6462       1 0x00010001 # active func sel
+6463       1 0x00010001 # active dir
+6464       0 0x00010001 # active pull
+6465       3 0x00010001 # active drive
+6466       1 0x00010001 # inactive func sel
+6467       0 0x00010001 # inactive dir
+6468       2 0x00010001 # inactive pull
+6469       3 0x00010001 # inactive drive
+
+6470       1 0x00010001 # version
+6471  0x010A 0x00010001 # gpio num
+6472       1 0x00010001 # active func sel
+6473       1 0x00010001 # active dir
+6474       0 0x00010001 # active pull
+6475       3 0x00010001 # active drive
+6476       1 0x00010001 # inactive func sel
+6477       0 0x00010001 # inactive dir
+6478       2 0x00010001 # inactive pull
+6479       3 0x00010001 # inactive drive
+
+6480       1 0x00010001 # version
+6481  0x010B 0x00010001 # gpio num
+6482       1 0x00010001 # active func sel
+6483       0 0x00010001 # active dir
+6484       0 0x00010001 # active pull
+6485       3 0x00010001 # active drive
+6486       1 0x00010001 # inactive func sel
+6487       0 0x00010001 # inactive dir
+6488       2 0x00010001 # inactive pull
+6489       3 0x00010001 # inactive drive
+
+