sdm660-common: Update rootdir from LA.UM.8.2.r1-05100-sdm660.0

Change-Id: I341776245fac44fd462756104cf4decb8506d38e

1 files changed, 0 insertions, 435 deletions

diff --git a/rootdir/bin/init.qcom.sh b/rootdir/bin/init.qcom.sh
deleted file mode 100644
index 1b811c3..0000000
--- a/rootdir/bin/init.qcom.sh
+++ /dev/null
@@ -1,435 +0,0 @@
-#! /vendor/bin/sh
-
-# Copyright (c) 2009-2016, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-target=`getprop ro.board.platform`
-low_ram=`getprop ro.config.low_ram`
-if [ -f /sys/devices/soc0/soc_id ]; then
-    platformid=`cat /sys/devices/soc0/soc_id`
-else
-    platformid=`cat /sys/devices/system/soc/soc0/id`
-fi
-
-start_battery_monitor()
-{
-	if ls /sys/bus/spmi/devices/qpnp-bms-*/fcc_data ; then
-		chown -h root.system /sys/module/pm8921_bms/parameters/*
-		chown -h root.system /sys/module/qpnp_bms/parameters/*
-		chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_data
-		chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_temp
-		chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_chgcyl
-		chmod 0660 /sys/module/qpnp_bms/parameters/*
-		chmod 0660 /sys/module/pm8921_bms/parameters/*
-		mkdir -p /data/bms
-		chown -h root.system /data/bms
-		chmod 0770 /data/bms
-		start battery_monitor
-	fi
-}
-
-start_charger_monitor()
-{
-	if ls /sys/module/qpnp_charger/parameters/charger_monitor; then
-		chown -h root.system /sys/module/qpnp_charger/parameters/*
-		chown -h root.system /sys/class/power_supply/battery/input_current_max
-		chown -h root.system /sys/class/power_supply/battery/input_current_trim
-		chown -h root.system /sys/class/power_supply/battery/input_current_settled
-		chown -h root.system /sys/class/power_supply/battery/voltage_min
-		chmod 0664 /sys/class/power_supply/battery/input_current_max
-		chmod 0664 /sys/class/power_supply/battery/input_current_trim
-		chmod 0664 /sys/class/power_supply/battery/input_current_settled
-		chmod 0664 /sys/class/power_supply/battery/voltage_min
-		chmod 0664 /sys/module/qpnp_charger/parameters/charger_monitor
-		start charger_monitor
-	fi
-}
-
-start_vm_bms()
-{
-	if [ -e /dev/vm_bms ]; then
-		chown -h root.system /sys/class/power_supply/bms/current_now
-		chown -h root.system /sys/class/power_supply/bms/voltage_ocv
-		chmod 0664 /sys/class/power_supply/bms/current_now
-		chmod 0664 /sys/class/power_supply/bms/voltage_ocv
-		start vm_bms
-	fi
-}
-
-start_msm_irqbalance_8939()
-{
-	if [ -f /vendor/bin/msm_irqbalance ]; then
-		case "$platformid" in
-		    "239" | "293" | "294" | "295" | "304" | "338" | "313" |"353" | "354")
-			start vendor.msm_irqbalance;;
-		    "349" | "350" )
-			start vendor.msm_irqbal_lb;;
-		esac
-	fi
-}
-
-start_msm_irqbalance_msmnile()
-{
-         if [ -f /vendor/bin/msm_irqbalance ]; then
-                start vendor.msm_irqbalance
-         fi
-}
-
-start_msm_irqbalance660()
-{
-	if [ -f /vendor/bin/msm_irqbalance ]; then
-		case "$platformid" in
-		    "317" | "324" | "325" | "326" | "345" | "346")
-			start vendor.msm_irqbalance;;
-		    "318" | "327" | "385")
-			start vendor.msm_irqbl_sdm630;;
-		esac
-	fi
-}
-
-start_msm_irqbalance()
-{
-	if [ -f /vendor/bin/msm_irqbalance ]; then
-		start vendor.msm_irqbalance
-	fi
-}
-
-baseband=`getprop ro.baseband`
-echo 1 > /proc/sys/net/ipv6/conf/default/accept_ra_defrtr
-
-case "$baseband" in
-        "svlte2a")
-        start bridgemgrd
-        ;;
-esac
-
-case "$target" in
-    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-            value=`cat /sys/devices/soc0/hw_platform`
-        else
-            value=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-        case "$value" in
-            "Fluid")
-             start profiler_daemon;;
-        esac
-        ;;
-    "msm8660" )
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-            platformvalue=`cat /sys/devices/soc0/hw_platform`
-        else
-            platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-        case "$platformvalue" in
-            "Fluid")
-                start profiler_daemon;;
-        esac
-        ;;
-    "msm8960")
-        case "$baseband" in
-            "msm")
-                start_battery_monitor;;
-        esac
-
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-            platformvalue=`cat /sys/devices/soc0/hw_platform`
-        else
-            platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-        case "$platformvalue" in
-             "Fluid")
-                 start profiler_daemon;;
-             "Liquid")
-                 start profiler_daemon;;
-        esac
-        ;;
-    "msm8974")
-        platformvalue=`cat /sys/devices/soc0/hw_platform`
-        case "$platformvalue" in
-             "Fluid")
-                 start profiler_daemon;;
-             "Liquid")
-                 start profiler_daemon;;
-        esac
-        case "$baseband" in
-            "msm")
-                start_battery_monitor
-                ;;
-        esac
-        start_charger_monitor
-        ;;
-    "sdm660")
-        if [ -f /sys/devices/soc0/soc_id ]; then
-             soc_id=`cat /sys/devices/soc0/soc_id`
-        else
-             soc_id=`cat /sys/devices/system/soc/soc0/id`
-        fi
-
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-             hw_platform=`cat /sys/devices/soc0/hw_platform`
-        else
-             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-
-        case "$soc_id" in
-             "317" | "324" | "325" | "326" | "318" | "327" | "385" )
-                  case "$hw_platform" in
-                       "Surf")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "MTP")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "RCM")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "QRD")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                  esac
-                  ;;
-       esac
-        start_msm_irqbalance660
-        ;;
-    "apq8084")
-        platformvalue=`cat /sys/devices/soc0/hw_platform`
-        case "$platformvalue" in
-             "Fluid")
-                 start profiler_daemon;;
-             "Liquid")
-                 start profiler_daemon;;
-        esac
-        ;;
-    "msm8226")
-        start_charger_monitor
-        ;;
-    "msm8610")
-        start_charger_monitor
-        ;;
-    "msm8916")
-        start_vm_bms
-        start_msm_irqbalance_8939
-        if [ -f /sys/devices/soc0/soc_id ]; then
-            soc_id=`cat /sys/devices/soc0/soc_id`
-        else
-            soc_id=`cat /sys/devices/system/soc/soc0/id`
-        fi
-
-        if [ -f /sys/devices/soc0/platform_subtype_id ]; then
-             platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id`
-        fi
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-             hw_platform=`cat /sys/devices/soc0/hw_platform`
-        fi
-        case "$soc_id" in
-             "239")
-                  case "$hw_platform" in
-                       "Surf")
-                            case "$platform_subtype_id" in
-                                 "1")
-                                      setprop qemu.hw.mainkeys 0
-                                      ;;
-                            esac
-                            ;;
-                       "MTP")
-                          case "$platform_subtype_id" in
-                               "3")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                          esac
-                          ;;
-                  esac
-                  ;;
-        esac
-        ;;
-    "msm8994" | "msm8992" | "msm8998" | "apq8098_latv" | "sdm845" | "sdm710" | "qcs605" | "sm6150" | "trinket")
-        start_msm_irqbalance
-        ;;
-    "msm8996")
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-             hw_platform=`cat /sys/devices/soc0/hw_platform`
-        fi
-        case "$hw_platform" in
-                "MTP" | "CDP")
-                #Loop through the sysfs nodes and determine the correct sysfs to change the permission and ownership.
-                        for count in 0 1 2 3 4 5 6 7 8 9 10
-                        do
-                                dir="/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input"$count
-                                if [ -d "$dir" ]; then
-                                     chmod 0660 $dir/secure_touch_enable
-                                     chmod 0440 $dir/secure_touch
-                                     chown system.drmrpc $dir/secure_touch_enable
-                                     chown system.drmrpc $dir/secure_touch
-                                     break
-                                fi
-                        done
-                        ;;
-        esac
-        ;;
-    "msm8909")
-        start_vm_bms
-        ;;
-    "msmnile")
-        start_msm_irqbalance_msmnile
-        ;;
-    "msm8937")
-        start_msm_irqbalance_8939
-        if [ -f /sys/devices/soc0/soc_id ]; then
-            soc_id=`cat /sys/devices/soc0/soc_id`
-        else
-            soc_id=`cat /sys/devices/system/soc/soc0/id`
-        fi
-
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-             hw_platform=`cat /sys/devices/soc0/hw_platform`
-        else
-             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-	if [ "$low_ram" != "true" ]; then
-             case "$soc_id" in
-                  "294" | "295" | "303" | "307" | "308" | "309" | "313" | "320" | "353" | "354" | "363" | "364")
-                       case "$hw_platform" in
-                            "Surf")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                            "MTP")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                            "RCM")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                            "QRD")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       esac
-                       ;;
-             esac
-        fi
-        ;;
-    "msm8953")
-	start_msm_irqbalance_8939
-        if [ -f /sys/devices/soc0/soc_id ]; then
-            soc_id=`cat /sys/devices/soc0/soc_id`
-        else
-            soc_id=`cat /sys/devices/system/soc/soc0/id`
-        fi
-
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-             hw_platform=`cat /sys/devices/soc0/hw_platform`
-        else
-             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-        case "$soc_id" in
-             "293" | "304" | "338" | "351" | "349" | "350" )
-                  case "$hw_platform" in
-                       "Surf")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "MTP")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "RCM")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "QRD")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                  esac
-                  ;;
-       esac
-        ;;
-    "sdm710")
-        if [ -f /sys/devices/soc0/soc_id ]; then
-            soc_id=`cat /sys/devices/soc0/soc_id`
-        else
-            soc_id=`cat /sys/devices/system/soc/soc0/id`
-        fi
-
-        if [ -f /sys/devices/soc0/hw_platform ]; then
-             hw_platform=`cat /sys/devices/soc0/hw_platform`
-        else
-             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
-        fi
-        case "$soc_id" in
-             "336" | "337" | "347" | "360" | "393" | "370" | "371" )
-                  case "$hw_platform" in
-                       "Surf")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "MTP")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "RCM")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                       "QRD")
-                                    setprop qemu.hw.mainkeys 0
-                                    ;;
-                  esac
-                  ;;
-       esac
-        ;;
-esac
-
-#
-# Make modem config folder and copy firmware config to that folder for RIL
-#
-if [ -f /data/vendor/modem_config/ver_info.txt ]; then
-    prev_version_info=`cat /data/vendor/modem_config/ver_info.txt`
-else
-    prev_version_info=""
-fi
-
-cur_version_info=`cat /vendor/firmware_mnt/verinfo/ver_info.txt`
-if [ ! -f /vendor/firmware_mnt/verinfo/ver_info.txt -o "$prev_version_info" != "$cur_version_info" ]; then
-    # add W for group recursively before delete
-    chmod g+w -R /data/vendor/modem_config/*
-    rm -rf /data/vendor/modem_config/*
-    # preserve the read only mode for all subdir and files
-    cp --preserve=m -dr /vendor/firmware_mnt/image/modem_pr/mcfg/configs/* /data/vendor/modem_config
-    cp --preserve=m -d /vendor/firmware_mnt/verinfo/ver_info.txt /data/vendor/modem_config/
-    cp --preserve=m -d /vendor/firmware_mnt/image/modem_pr/mbn_ota.txt /data/vendor/modem_config/
-    # the group must be root, otherwise this script could not add "W" for group recursively
-    chown -hR radio.root /data/vendor/modem_config/*
-fi
-chmod g-w /data/vendor/modem_config
-setprop ro.vendor.ril.mbn_copy_completed 1
-
-#check build variant for printk logging
-#current default minimum boot-time-default
-buildvariant=`getprop ro.build.type`
-case "$buildvariant" in
-    "userdebug" | "eng")
-        #set default loglevel to KERN_INFO
-        echo "6 6 1 7" > /proc/sys/kernel/printk
-        ;;
-    *)
-        #set default loglevel to KERN_WARNING
-        echo "4 4 1 4" > /proc/sys/kernel/printk
-        ;;
-esac