sdm660-common: Checkout GPS config from jasmine V11.0.4.0.QDIMIXM

Change-Id: I27fa3dbb4b1d301a6cd60a6a0b224e35c18c4b46

1 files changed, 254 insertions, 0 deletions

diff --git a/gps/etc/izat.conf b/gps/etc/izat.conf
new file mode 100644
index 0000000..678228c
--- /dev/null
+++ b/gps/etc/izat.conf
@@ -0,0 +1,254 @@
+#########################################
+# Log verbosity control for izat modules
+#########################################
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
+IZAT_DEBUG_LEVEL = 2
+
+##################################################
+# Select WIFI Wait Timeout value in seconds for SUPL
+##################################################
+WIFI_WAIT_TIMEOUT_SELECT = 0
+
+##################################################
+# Time interval of injecting SRN scan data to modem
+# time in seconds.
+# Note: recommended value is between 1-5 sec
+##################################################
+LPPE_SRN_DATA_SCAN_INJECT_TIME=2
+
+##################################################
+# Identify this target as OTA updated or new
+# 0 - New target
+# 1 - OTA updated
+##################################################
+OTA_UPDATED_TARGET=0
+
+################################
+# NLP Settings
+################################
+# NLP_MODE  1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
+# For Automotive products, please use NLP_MODE = 4 only.
+# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
+# to determine how much Tolerance for first position
+# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
+# to determine how much Tolerance for positions after first
+# NLP_THRESHOLD: Sets how many failures needed before
+# switching preferred NLP in Combo mode
+# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
+# must be, in multiples, between two NLP location reports to
+# be considered much worse accuracy. Used in switching logic
+# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
+# whether or not to still send network location requests to
+# QNP when the EULA is not consented to by the user. QNP can
+# still return ZPP locations or injected locations even
+# without EULA consent, but the uncertainty can be high.
+# QNP preferred mode prefers QNP when there is EULA consent,
+# otherwise OSNLP is used.
+NLP_MODE = 4
+NLP_MODE_EMERGENCY = 2
+NLP_TOLERANCE_TIME_FIRST = 5000
+NLP_TOLERANCE_TIME_AFTER = 20000
+NLP_THRESHOLD = 3
+NLP_ACCURACY_MULTIPLE = 2
+NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
+
+#########################################
+# NLP PACKAGE SETTINGS
+#########################################
+# OSNLP_PACKAGE: name of default NLP package
+OSNLP_PACKAGE = com.google.android.gms
+# REGION_OSNLP_PACKAGE:
+# This value will be used as alternative
+# for particular region where default NLP is not functional.
+#REGION_OSNLP_PACKAGE =
+
+###################################
+# GEOFENCE SERVICES
+###################################
+# If set to one of the defined values below, it will override
+# the responsiveness for geofence services, which implements
+# the Proximity Alert API. If not set to a value defined below,
+# which is default, it will not override the responsivness.
+# The geofence HAL API is unaffected by this value.
+# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
+
+#####################################
+#GTP Opt-In app
+#####################################
+
+#GTP privacy policy version url
+#https support is required
+GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
+
+#GTP privacy policy version download retry interval
+#unit is second. default is 86400
+GTP_PRIVACY_RETRY_INTERVAL = 86400
+
+#####################################
+# IZAT PREMIUM FEATURE SETTINGS
+#####################################
+#Possible states of a feature:
+#DISABLED
+#BASIC
+#PREMIUM
+
+#GTP_MODE valid modes:
+# DISABLED
+# LEGACY_WWAN
+# SDK (WWAN not available for Modems before LocTech 10.0)
+GTP_MODE=DISABLED
+
+#GTP_WAA valid modes:
+# DISABLED
+# BASIC
+GTP_WAA=DISABLED
+
+#SAP valid modes:
+# DISABLED
+# BASIC
+# PREMIUM
+# MODEM_DEFAULT
+SAP=PREMIUM
+
+#FREE_WIFI_SCAN_INJECT valid modes:
+#DISABLED
+#BASIC
+FREE_WIFI_SCAN_INJECT=BASIC
+
+#SUPL_WIFI valid modes:
+#DISABLED
+#BASIC
+SUPL_WIFI=BASIC
+
+#WIFI_SUPPLICANT_INFO valid modes:
+#DISABLED
+#BASIC
+WIFI_SUPPLICANT_INFO=BASIC
+
+#####################################
+# Location process launcher settings
+#####################################
+
+# DO NOT MODIFY
+# Modifying below attributes without
+# caution can have serious implications.
+
+#Values for PROCESS_STATE:
+# ENABLED
+# DISABLED
+
+#PROCESS_NAME
+# Name of the executable file.
+
+#FEATURE MASKS:
+# GTP-WIFI    0X03
+# GTP-MP-CELL 0xc00
+# GTP-WAA     0x100
+# SAP         0Xc0
+# ODCPI      0x1000
+# FREE_WIFI_SCAN_INJECT   0x2000
+# SUPL_WIFI   0x4000
+# WIFI_SUPPLICANT_INFO   0x8000
+
+#Values for PLATFORMS can be:
+#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
+#2. 'all' or 'all exclude' -> for All platforms
+#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
+
+#Values for BASEBAND can be:
+#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
+#2. 'all' or 'all exclude' -> for all basebands
+#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
+PROCESS_NAME=lowi-server
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps wifi inet oem_2901
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0xf303
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=0
+
+PROCESS_NAME=xtwifi-inet-agent
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xc03
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+PROCESS_NAME=xtwifi-client
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=wifi inet gps system oem_2904
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xd03
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+PROCESS_NAME=slim_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+PROCESS_NAME=xtra-daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps system
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=0
+
+########################################
+# Engine Service which host DRE module #
+# To enable DRE engine service, change #
+# PROCESS_STATE=ENABLED                #
+########################################
+PROCESS_NAME=engine-service
+PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps diag inet qwes oem_2901 system
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+########################################
+# Engine Service which host PPE module #
+# To enable PPE engine service, change #
+# PROCESS_STATE=ENABLED                #
+# and update process arugements        #
+# with PPE library name                #
+#PROCESS_ARGUMENT=PPE libepsimulator.so#
+########################################
+PROCESS_NAME=engine-service
+PROCESS_ARGUMENT=PPE libepsimulator.so
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps diag inet oem_2901
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1