wayne: Initial bringup

Change-Id: I211da5781d8c7a16199fd8a18e1b00cfc9e01944
Signed-off-by: Isaac Chen <isaacchen@isaacchen.cn>

1 files changed, 91 insertions, 0 deletions

diff --git a/configs/gps/flp.conf b/configs/gps/flp.conf
new file mode 100644
index 0000000..dae3b82
--- /dev/null
+++ b/configs/gps/flp.conf
@@ -0,0 +1,91 @@
+###################################
+#####       FLP settings      #####
+###################################
+
+###################################
+# FLP BATCHING SIZE
+###################################
+# The number of batched locations
+# requested to modem. The desired number
+# defined below may not be satisfied, as
+# the modem can only return the number
+# of batched locations that can be allocated,
+# which is limited by memory. The default
+# batch size defined as 20 as below.
+BATCH_SIZE=20
+
+# The number of batched locations
+# requested to modem for outdoor
+# trip batching. The desired number
+# defined below may not be satisfied, as
+# the modem can only return the number
+# of batched locations that can be allocated,
+# which is limited by memory. The default
+# trip batch size defined as 600 as below.
+OUTDOOR_TRIP_BATCH_SIZE=600
+
+###################################
+# FLP BATCHING SESSION TIMEOUT
+###################################
+# Duration with which batch session timeout
+# happens in milliseconds. If not specified
+# or set to zero, batching session timeout
+# defaults to 20 seconds by the modem.
+# BATCH_SESSION_TIMEOUT=20000
+
+###################################
+# FLP CAPABILITIES BIT MASK
+###################################
+# GEOFENCE = 0x01
+# BATCHING = 0x02
+# default = GEOFENCE | BATCHING
+CAPABILITIES=0x03
+
+###################################
+# FLP BATCHING ACCURACY
+###################################
+# Set to one of the defined values below
+# to define the accuracy of batching.
+# If not specified, accuracy defaults
+# to LOW.
+# FLP BATCHING ACCURACY values:
+# Low accuracy = 0
+# Medium accuracy = 1
+# High accuracy = 2
+ACCURACY=1
+
+###################################
+# FLP GEOFENCE RESPONSIVENESS
+###################################
+# If set to one of the defined values below,
+# it will override the responsiveness for
+# FLP geofence, which implements the fused
+# location API. If not set to a value defined
+# below, which is default, it will not
+# override the responsivness.
+# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0
+
+####################################
+# By default APPS must support LB only if modem support
+# LB 1.5 and above. This parameter adds an exception
+# for targets where modem only supports LB 1.0.
+# This might be useful for primarily outdoor devices.
+# 0: MUST NOT ALLOW LB IF MODEM ONLY SUPPORTS
+# LB 1.0
+# 1: ALLOW LB IF MODEM ONLY SUPPORTS LB 1.0
+####################################
+ALLOW_LB_1_0 = 0
+
+####################################
+# By default if network fixes are not sensor assisted
+# these fixes must be dropped. This parameter adds an exception
+# for targets where there is no PDR and we still want to
+# report out network fixes
+# 0: MUST NOT ALLOW NETWORK FIXES
+# 1: ALLOW NETWORK FIXES
+####################################
+ALLOW_NETWORK_FIXES = 0