wayne-common: Remove init.qcom.early_boot.sh

* This script doesn't do anything useful, since it tries to set a lot of
  ro.* properties, which is not allowed anyway.

Change-Id: I408cc17d0d18e81a9cf0e529e6b78622c3017a7f
Signed-off-by: PIPIPIG233666 <2212848813@qq.com>

4 files changed, 1 insertions, 471 deletions

diff --git a/rootdir/Android.mk b/rootdir/Android.mk
index d95981c..135cf74 100644
--- a/rootdir/Android.mk
+++ b/rootdir/Android.mk
@@ -4,14 +4,6 @@ include $(CLEAR_VARS)
 # files that live under device/qcom/common/rootdir/etc/
 
 include $(CLEAR_VARS)
-LOCAL_MODULE       := init.qcom.early_boot.sh
-LOCAL_MODULE_TAGS  := optional eng
-LOCAL_MODULE_CLASS := ETC
-LOCAL_SRC_FILES    := bin/init.qcom.early_boot.sh
-LOCAL_MODULE_PATH  := $(TARGET_OUT_VENDOR_EXECUTABLES)
-include $(BUILD_PREBUILT)
-
-include $(CLEAR_VARS)
 LOCAL_MODULE       := init.qcom.post_boot.sh
 LOCAL_MODULE_TAGS  := optional eng
 LOCAL_MODULE_CLASS := ETC
diff --git a/rootdir/bin/init.qcom.early_boot.sh b/rootdir/bin/init.qcom.early_boot.sh
deleted file mode 100755
index bba8a5f..0000000
--- a/rootdir/bin/init.qcom.early_boot.sh
+++ /dev/null
@@ -1,461 +0,0 @@
-#! /vendor/bin/sh
-
-# Copyright (c) 2012-2013,2016,2018 The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-export PATH=/vendor/bin
-
-# Set platform variables
-if [ -f /sys/devices/soc0/hw_platform ]; then
-    soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
-else
-    soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
-fi
-if [ -f /sys/devices/soc0/soc_id ]; then
-    soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
-else
-    soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
-fi
-if [ -f /sys/devices/soc0/platform_version ]; then
-    soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
-else
-    soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
-fi
-
-if [ -f /sys/class/drm/card0-DSI-1/modes ]; then
-    echo "detect" > /sys/class/drm/card0-DSI-1/status
-    mode_file=/sys/class/drm/card0-DSI-1/modes
-    while read line; do
-        fb_width=${line%x*};
-        break;
-    done < $mode_file
-elif [ -f /sys/class/graphics/fb0/virtual_size ]; then
-    res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null
-    fb_width=${res%,*}
-fi
-
-log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'"
-
-#For drm based display driver
-vbfile=/sys/module/drm/parameters/vblankoffdelay
-if [ -w $vbfile ]; then
-    echo -1 >  $vbfile
-else
-    log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist"
-fi
-
-function set_density_by_fb() {
-    #put default density based on width
-    if [ -z $fb_width ]; then
-        setprop vendor.display.lcd_density 320
-    else
-        if [ $fb_width -ge 1600 ]; then
-           setprop vendor.display.lcd_density 640
-        elif [ $fb_width -ge 1440 ]; then
-           setprop vendor.display.lcd_density 560
-        elif [ $fb_width -ge 1080 ]; then
-           setprop vendor.display.lcd_density 480
-        elif [ $fb_width -ge 720 ]; then
-           setprop vendor.display.lcd_density 320 #for 720X1280 resolution
-        elif [ $fb_width -ge 480 ]; then
-            setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution
-        else
-            setprop vendor.display.lcd_density 160
-        fi
-    fi
-}
-
-target=`getprop ro.board.platform`
-case "$target" in
-    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
-        case "$soc_hwplatform" in
-            "FFA" | "SVLTE_FFA")
-                # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that
-                # the UI keyboard works fine.
-                ln -s  /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
-                ;;
-            "Fluid")
-                setprop vendor.display.lcd_density 240
-                setprop qcom.bt.dev_power_class 2
-                ;;
-            *)
-                ln -s  /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
-                ;;
-        esac
-        ;;
-
-    "msm8660")
-        case "$soc_hwplatform" in
-            "Fluid")
-                setprop vendor.display.lcd_density 240
-                ;;
-            "Dragon")
-                setprop ro.sound.alsa "WM8903"
-                ;;
-        esac
-        ;;
-
-    "msm8960")
-        # lcd density is write-once. Hence the separate switch case
-        case "$soc_hwplatform" in
-            "Liquid")
-                if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku
-                    setprop ro.sf.hwrotation 90
-                fi
-
-                setprop vendor.display.lcd_density 160
-                ;;
-            "MTP")
-                setprop vendor.display.lcd_density 240
-                ;;
-            *)
-                case "$soc_hwid" in
-                    "109")
-                        setprop vendor.display.lcd_density 160
-                        ;;
-                    *)
-                        setprop vendor.display.lcd_density 240
-                        ;;
-                esac
-            ;;
-        esac
-
-        #Set up composition type based on the target
-        case "$soc_hwid" in
-            87)
-                #8960
-                setprop debug.composition.type dyn
-                ;;
-            153|154|155|156|157|138)
-                #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB
-                setprop debug.composition.type c2d
-                ;;
-            *)
-        esac
-        ;;
-
-    "msm8974")
-        case "$soc_hwplatform" in
-            "Liquid")
-                setprop vendor.display.lcd_density 160
-                # Liquid do not have hardware navigation keys, so enable
-                # Android sw navigation bar
-                setprop ro.hw.nav_keys 0
-                ;;
-            "Dragon")
-                setprop vendor.display.lcd_density 240
-                ;;
-            *)
-                setprop vendor.display.lcd_density 320
-                ;;
-        esac
-        ;;
-
-    "msm8226")
-        case "$soc_hwplatform" in
-            *)
-                setprop vendor.display.lcd_density 320
-                ;;
-        esac
-        ;;
-
-    "msm8610" | "apq8084" | "mpq8092")
-        case "$soc_hwplatform" in
-            *)
-                setprop vendor.display.lcd_density 240
-                ;;
-        esac
-        ;;
-    "apq8084")
-        case "$soc_hwplatform" in
-            "Liquid")
-                setprop vendor.display.lcd_density 320
-                # Liquid do not have hardware navigation keys, so enable
-                # Android sw navigation bar
-                setprop ro.hw.nav_keys 0
-                ;;
-            "SBC")
-                setprop vendor.display.lcd_density 200
-                # SBC do not have hardware navigation keys, so enable
-                # Android sw navigation bar
-                setprop qemu.hw.mainkeys 0
-                ;;
-            *)
-                setprop vendor.display.lcd_density 480
-                ;;
-        esac
-        ;;
-    "msm8996")
-        case "$soc_hwplatform" in
-            "Dragon")
-                setprop vendor.display.lcd_density 240
-                setprop qemu.hw.mainkeys 0
-                ;;
-            "ADP")
-                setprop vendor.display.lcd_density 160
-                setprop qemu.hw.mainkeys 0
-                ;;
-            "SBC")
-                setprop vendor.display.lcd_density 240
-                setprop qemu.hw.mainkeys 0
-                ;;
-            *)
-                setprop vendor.display.lcd_density 560
-                ;;
-        esac
-        ;;
-    "msm8937" | "msm8940")
-        # Set vendor.opengles.version based on chip id.
-        # MSM8937 and MSM8940  variants supports OpenGLES 3.1
-        # 196608 is decimal for 0x30000 to report version 3.0
-        # 196609 is decimal for 0x30001 to report version 3.1
-        # 196610 is decimal for 0x30002 to report version 3.2
-        case "$soc_hwid" in
-            294|295|296|297|298|313|353|354|363|364)
-                setprop vendor.opengles.version 196610
-                ;;
-            303|307|308|309|320)
-                # Vulkan is not supported for 8917 variants
-                setprop vendor.opengles.version 196608
-                setprop persist.graphics.vulkan.disable true
-                ;;
-            *)
-                setprop vendor.opengles.version 196608
-                ;;
-        esac
-        ;;
-    "msm8909")
-        case "$soc_hwplatform" in
-            *)
-                setprop persist.graphics.vulkan.disable true
-                ;;
-        esac
-        ;;
-    "msm8998" | "apq8098_latv")
-        case "$soc_hwplatform" in
-            *)
-                setprop vendor.display.lcd_density 560
-                ;;
-        esac
-        ;;
-    "sdm845")
-        case "$soc_hwplatform" in
-            *)
-                if [ $fb_width -le 1600 ]; then
-                    setprop vendor.display.lcd_density 560
-                    setprop dalvik.vm.heapgrowthlimit 256m
-                else
-                    setprop vendor.display.lcd_density 640
-                    setprop dalvik.vm.heapgrowthlimit 512m
-                fi
-                ;;
-        esac
-        ;;
-    "msmnile")
-        case "$soc_hwplatform" in
-            *)
-                if [ $fb_width -le 1600 ]; then
-                    setprop vendor.display.lcd_density 560
-                    setprop dalvik.vm.heapgrowthlimit 256m
-                else
-                    setprop vendor.display.lcd_density 640
-                    setprop dalvik.vm.heapgrowthlimit 512m
-                fi
-                ;;
-        esac
-        ;;
-    "sdm710" | "msmpeafowl")
-        case "$soc_hwplatform" in
-            *)
-                sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
-                if [ $sku_ver -eq 1 ]; then
-                    setprop vendor.media.sdm710.version 1
-                fi
-                ;;
-        esac
-        ;;
-    "msm8953")
-        cap_ver = 1
-                if [ -e "/sys/devices/platform/soc/1d00000.qcom,vidc/capability_version" ]; then
-                    cap_ver=`cat /sys/devices/platform/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null
-                else
-                    cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null
-                fi
-
-                if [ $cap_ver -eq 1 ]; then
-                    setprop vendor.media.msm8953.version 1
-                fi
-                ;;
-    #Set property to differentiate SDM660 & SDM455
-    #SOC ID for SDM455 is 385
-    "sdm660")
-        case "$soc_hwid" in
-           385)
-               setprop vendor.media.sdm660.version 1
-        esac
-        ;;
-esac
-
-baseband=`getprop ro.baseband`
-#enable atfwd daemon all targets except sda, apq, qcs
-case "$baseband" in
-    "apq" | "sda" | "qcs" )
-        setprop persist.vendor.radio.atfwd.start false;;
-    *)
-        setprop persist.vendor.radio.atfwd.start true;;
-esac
-
-#set default lcd density
-#Since lcd density has read only
-#property, it will not overwrite previous set
-#property if any target is setting forcefully.
-set_density_by_fb
-
-
-# set Lilliput LCD density for ADP
-product=`getprop ro.build.product`
-
-case "$product" in
-        "msmnile_au")
-         setprop vendor.display.lcd_density 160
-         ;;
-        *)
-        ;;
-esac
-
-# Setup display nodes & permissions
-# HDMI can be fb1 or fb2
-# Loop through the sysfs nodes and determine
-# the HDMI(dtv panel)
-
-function set_perms() {
-    #Usage set_perms <filename> <ownership> <permission>
-    chown -h $2 $1
-    chmod $3 $1
-}
-
-function setHDMIPermission() {
-   file=/sys/class/graphics/fb$1
-   dev_file=/dev/graphics/fb$1
-   dev_gfx_hdmi=/devices/virtual/switch/hdmi
-
-   set_perms $file/hpd system.graphics 0664
-   set_perms $file/res_info system.graphics 0664
-   set_perms $file/vendor_name system.graphics 0664
-   set_perms $file/product_description system.graphics 0664
-   set_perms $file/video_mode system.graphics 0664
-   set_perms $file/format_3d system.graphics 0664
-   set_perms $file/s3d_mode system.graphics 0664
-   set_perms $file/dynamic_fps system.graphics 0664
-   set_perms $file/msm_fb_dfps_mode system.graphics 0664
-   set_perms $file/hdr_stream system.graphics 0664
-   set_perms $file/cec/enable system.graphics 0664
-   set_perms $file/cec/logical_addr system.graphics 0664
-   set_perms $file/cec/rd_msg system.graphics 0664
-   set_perms $file/pa system.graphics 0664
-   set_perms $file/cec/wr_msg system.graphics 0600
-   set_perms $file/hdcp/tp system.graphics 0664
-   set_perms $file/hdcp2p2/min_level_change system.graphics 0660
-   set_perms $file/hdmi_audio_cb audioserver.audio 0600
-   ln -s $dev_file $dev_gfx_hdmi
-}
-
-# check for the type of driver FB or DRM
-fb_driver=/sys/class/graphics/fb0
-if [ -e "$fb_driver" ]
-then
-    # check for HDMI connection
-    for fb_cnt in 0 1 2 3
-    do
-        file=/sys/class/graphics/fb$fb_cnt/msm_fb_panel_info
-        if [ -f "$file" ]
-        then
-          cat $file | while read line; do
-            case "$line" in
-                *"is_pluggable"*)
-                 case "$line" in
-                      *"1"*)
-                      setHDMIPermission $fb_cnt
-                 esac
-            esac
-          done
-        fi
-    done
-
-    # check for mdp caps
-    file=/sys/class/graphics/fb0/mdp/caps
-    if [ -f "$file" ]
-    then
-        setprop vendor.gralloc.disable_ubwc 1
-        cat $file | while read line; do
-          case "$line" in
-                    *"ubwc"*)
-                    setprop vendor.gralloc.enable_fb_ubwc 1
-                    setprop vendor.gralloc.disable_ubwc 0
-                esac
-        done
-    fi
-
-    file=/sys/class/graphics/fb0
-    if [ -d "$file" ]
-    then
-            set_perms $file/idle_time system.graphics 0664
-            set_perms $file/dynamic_fps system.graphics 0664
-            set_perms $file/dyn_pu system.graphics 0664
-            set_perms $file/modes system.graphics 0664
-            set_perms $file/mode system.graphics 0664
-            set_perms $file/msm_cmd_autorefresh_en system.graphics 0664
-    fi
-
-    # set lineptr permissions for all displays
-    for fb_cnt in 0 1 2 3
-    do
-        file=/sys/class/graphics/fb$fb_cnt
-        if [ -f "$file/lineptr_value" ]; then
-            set_perms $file/lineptr_value system.graphics 0664
-        fi
-        if [ -f "$file/msm_fb_persist_mode" ]; then
-            set_perms $file/msm_fb_persist_mode system.graphics 0664
-        fi
-    done
-else
-    set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660
-fi
-
-boot_reason=`cat /proc/sys/kernel/boot_reason`
-reboot_reason=`getprop ro.boot.alarmboot`
-if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then
-    setprop ro.vendor.alarm_boot true
-else
-    setprop ro.vendor.alarm_boot false
-fi
-
-# copy GPU frequencies to vendor property
-if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then
-    gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null
-    setprop vendor.gpu.available_frequencies "$gpu_freq"
-fi
diff --git a/rootdir/etc/init.qcom.rc b/rootdir/etc/init.qcom.rc
index 6fe45f6..1683bb5 100755
--- a/rootdir/etc/init.qcom.rc
+++ b/rootdir/etc/init.qcom.rc
@@ -71,7 +71,7 @@ on early-boot
     write /sys/kernel/boot_adsp/boot 1
     write /sys/kernel/boot_cdsp/boot 1
     write /sys/kernel/boot_slpi/boot 1
-    exec u:r:qti_init_shell:s0 -- /vendor/bin/init.qcom.early_boot.sh
+    setprop ro.alarm_boot false
 
     # for backward compatibility
     chown system system /persist/sensors
diff --git a/wayne.mk b/wayne.mk
index 852cd9d..59b33a6 100644
--- a/wayne.mk
+++ b/wayne.mk
@@ -261,7 +261,6 @@ PRODUCT_PACKAGES += \
     init.class_main.sh \
     init.goodix.sh \
     init.msm.usb.configfs.rc \
-    init.qcom.early_boot.sh \
     init.qcom.post_boot.sh \
     init.qcom.sensors.sh \
     init.qcom.rc \