wayne-common: Drop useless GPS configuration file

 * We copy our gps.conf.

Change-Id: I2260f22b81bd6790070ab27d9e290c20910c2e2b
Signed-off-by: PIPIPIG233666 <2212848813@qq.com>

2 files changed, 0 insertions, 233 deletions

diff --git a/gps/etc/Android.mk b/gps/etc/Android.mk
deleted file mode 100644
index d9eb0e1..0000000
--- a/gps/etc/Android.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-
-LOCAL_PATH := $(call my-dir)
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := gps.conf
-LOCAL_MODULE_TAGS := optional
-LOCAL_MODULE_CLASS := ETC
-LOCAL_MODULE_PATH  := $(TARGET_OUT_VENDOR)/etc/
-LOCAL_SRC_FILES := gps.conf
-
-include $(BUILD_PREBUILT)
-
diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf
deleted file mode 100644
index d30461e..0000000
--- a/gps/etc/gps.conf
+++ /dev/null
@@ -1,221 +0,0 @@
-#Uncommenting these urls would only enable
-#the power up auto injection and force injection(test case).
-#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
-#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
-#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
-
-#Version check for XTRA
-#DISABLE = 0
-#AUTO    = 1
-#XTRA2   = 2
-#XTRA3   = 3
-XTRA_VERSION_CHECK=0
-
-# Error Estimate
-# _SET = 1
-# _CLEAR = 0
-ERR_ESTIMATE=0
-
-#NTP server
-NTP_SERVER=time.izatcloud.net
-
-#XTRA CA path
-XTRA_CA_PATH=/system/etc/security/cacerts
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 3
-
-# Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=0
-
-# Below bit mask configures how GPS functionalities
-# should be locked when user turns off GPS on Settings
-# Set bit 0x1 if MO GPS functionalities are to be locked
-# Set bit 0x2 if NI GPS functionalities are to be locked
-# default - non is locked for backward compatibility
-#GPS_LOCK = 0
-
-# supl version 1.0
-SUPL_VER=0x10000
-
-# Emergency SUPL, 1=enable, 0=disable
-#SUPL_ES=0
-
-#Choose PDN for Emergency SUPL
-#1 - Use emergency PDN
-#0 - Use regular SUPL PDN for Emergency SUPL
-#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
-
-#SUPL_MODE is a bit mask set in config.xml per carrier by default.
-#If it is uncommented here, this value will overwrite the value from
-#config.xml.
-#MSA=0X2
-#MSB=0X1
-#SUPL_MODE=
-
-# GPS Capabilities bit mask
-# SCHEDULING = 0x01
-# MSB = 0x02
-# MSA = 0x04
-# ON_DEMAND_TIME = 0x10
-# GEOFENCE = 0x20
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
-CAPABILITIES=0x37
-
-# Accuracy threshold for intermediate positions
-# less accurate positions are ignored, 0 for passing all positions
-# ACCURACY_THRES=5000
-
-################################
-##### AGPS server settings #####
-################################
-
-# FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
-# SUPL_PORT=1234
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
-# Bitmask of slots that are available
-# for write/install to, where 1s indicate writable,
-# and the default value is 0 where no slots
-# are writable. For example, AGPS_CERT_WRITABLE_MASK
-# of b1000001010 makes 3 slots available
-# and the remaining 7 slots unwritable.
-#AGPS_CERT_WRITABLE_MASK=0
-
-####################################
-#  LTE Positioning Profile Settings
-####################################
-# 0: Enable RRLP on LTE(Default)
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 2
-
-################################
-# EXTRA SETTINGS
-################################
-# NMEA provider (1=Modem Processor, 0=Application Processor)
-NMEA_PROVIDER=0
-# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
-SGLTE_TARGET=0
-
-##################################################
-# Select Positioning Protocol on A-GLONASS system
-##################################################
-# 0x1: RRC CPlane
-# 0x2: RRLP UPlane
-# 0x4: LLP Uplane
-A_GLONASS_POS_PROTOCOL_SELECT = 0
-
-##################################################
-# Select technology for LPPe Control Plane
-##################################################
-# 0x1: DBH for LPPe CP
-# 0x2: WLAN AP Measurements for LPPe CP
-# 0x4: SRN AP measurement for CP
-# 0x8: Sensor Barometer Measurement LPPe CP
-LPPE_CP_TECHNOLOGY = 0
-
-##################################################
-# Select technology for LPPe User Plane
-##################################################
-# 0x1: DBH for LPPe UP
-# 0x2: WLAN AP Measurements for LPPe UP
-# 0x4: SRN AP measurement for UP
-# 0x8: Sensor Barometer Measurement LPPe UP
-LPPE_UP_TECHNOLOGY = 0
-
-##################################################
-# AGPS_CONFIG_INJECT
-##################################################
-# enable/disable injection of AGPS configurations:
-#     SUPL_VER
-#     SUPL_HOST
-#     SUPL_PORT
-#     C2K_HOST
-#     C2K_PORT
-#     LPP_PROFILE
-#     A_GLONASS_POS_PROTOCOL_SELECT
-# 0: disable
-# 1: enable
-AGPS_CONFIG_INJECT = 1
-
-##################################################
-# GNSS settings for automotive use cases
-# Configurations in following section are
-# specific to automotive use cases, others
-# please do not change, keep the default values
-##################################################
-
-# AP Coarse Timestamp Uncertainty
-##################################################
-# default : 10
-# AP time stamp uncertainty, until GNSS receiver
-# is able to acquire better timing information
-AP_TIMESTAMP_UNCERTAINTY = 10
-
-##################################################
-# QDR engine availability status
-##################################################
-# 0 : NO QDR (default)
-# 1 : QDR enabled
-# This settings enables QDR Configuration for
-# automotive use case, if enabled then
-# DR_AP_Service needs to be enabled in izat.conf
-#EXTERNAL_DR_ENABLED = 0
-
-#####################################
-# DR_SYNC Pulse Availability
-#####################################
-# 0 : DR_SYNC pulse not available (default)
-# 1 : DR_SYNC pulse available
-# This configuration enables the driver to make use
-# of PPS events generated by DR_SYNC pulse
-# Standard Linux PPS driver needs to be enabled
-DR_SYNC_ENABLED = 0
-
-#####################################
-# PPS Device name
-#####################################
-PPS_DEVICENAME = /dev/pps0
-
-#####################################
-# AP Clock Accuracy
-#####################################
-# Quality of APPS processor clock (in PPM).
-# Value specified is used for calculation of
-# APPS time stamp uncertainty
-AP_CLOCK_PPM = 100
-
-#####################################
-# MAX ms difference to detect missing pulse
-#####################################
-# Specifies time threshold in ms to validate any missing PPS pulses
-MISSING_PULSE_TIME_DELTA = 900
-
-#####################################
-# Propagation time uncertainty
-#####################################
-# This settings enables time uncertainty propagation
-# logic incase of missing PPS pulse
-PROPAGATION_TIME_UNCERTAINTY = 1
-
-#######################################
-#  APN / IP Type Configuration
-#  APN and IP Type to use for setting
-#  up WWAN call.
-#  Use below values for IP Type:
-#  v4 = 4
-#  v6 = 6
-#  v4v6 = 10
-#######################################
-# INTERNET_APN = abc.xyz
-# INTERNET_IP_TYPE = 4
-# SUPL_APN = abc.xyz
-# SUPL_IP_TYPE = 4