summaryrefslogtreecommitdiff
path: root/rootdir
AgeCommit message (Collapse)Author
2019-10-25shinano-common: rootdir: Update second RIL daemon serviceBruno Martins
* Match the new changes introduced in O * Important sidenote: if the kernel doesn't support one of the capabilities, that's enough for the whole capability set to fail for that particular service. Previous to adding the full support for these capabilities into the kernel, the following was printed in the dmesg: init: init.variant.rc: 5: capability 'BLOCK_SUSPEND' not supported by the kernel While checking rild's capabilities (`cat /proc/$$/status`, where $$ is the PID), it could be seen that those were totally messed up: Name: rild ... Uid: 1001 1001 1001 1001 Gid: 1001 1001 1001 1001 ... Groups: 1005 1007 2001 2901 3003 3009 3010 9998 ... CapInh: 0000000000000000 CapPrm: 0000000000000000 CapEff: 0000000000000000 CapBnd: ffffffffffffffff CapAmb: 0000000000000000 ... After adding CAP_BLOCK_SUSPEND support to the kernel, it changed to: Name: rild ... Uid: 1001 1001 1001 1001 Gid: 1001 1001 1001 1001 ... Groups: 1005 1007 2001 2901 3003 3009 3010 9998 ... CapInh: 0000001000003000 CapPrm: 0000001000003000 CapEff: 0000001000003000 CapBnd: fffffff000003000 CapAmb: 0000001000003000 ... In this particular case, messed up capabilities resulted in broken mobile data. Change-Id: I8e5888ebeb4bcf26eed85a2c4dca320faad8f7e0
2019-10-25shinano-common: use /vendor for /system/vendorDemon Singur
The /vendor symlink is available as soon as /system is mounted, just use /vendor. Change-Id: I2e92ed2abe225f1366cac418b13763bb5617f704
2019-10-25shinano-common: Move uevent.qcom.rc to /vendorAbhishek Arpure
Change-Id: Iab2699bf26ca4402b835d1af8d4493f9b28595d9
2019-10-25shinano-common: Move hardware specific .rc files to /vendor/etc/init/hwAbhishek Arpure
The reason these files are moved to /vendor/etc/init/hw and not /vendor/etc/init is because 'init' scans the /vendor/etc/init folder for vendor service .rc fragments to import. That would either result in duplicate imports or out-of-order imports of these hardware specific .rc files and that *may* have unintended consequences. In order to preserve the current import order for MTP, we move all hardware specific .rc files to /vendor/etc/init/hw which is not autoscanned by init BUT leave the init.${ro.hardware}.rc (i.e. init.qcom.rc in this case) in root for 'init' to find. Change-Id: I14531da05e2a3a256f734f8de96e1f1969c753f9
2019-10-25shinano-common: Move fstab to /system/vendorBruno Martins
Change-Id: I460888519e447da8ab3800d62d60c5600b902da1
2019-10-25shinano-common: Set vendor.post_boot.parsed=1 before starting mpdecisionMichael Bestas
* Allows mpdecision to work properly on boot to restore selected power profile Change-Id: Ib92f971f28ed875481170b056ac16aad05aadcfc Signed-off-by: Arian <arian.kulmer@web.de>
2019-10-25shinano-common: rootdir: Reorganize init.qcom.power.rcArian
* revert e80a06f8c2632df3036818685ac2bf9fc06556b2 * don't enable adb from here
2019-10-25shinano-common: Use the /dev/block/bootdevice/by-name symlinkArian
2019-10-25shinano-common: fstab: remove errors=panicArian
2019-10-25shinano-common: Convert ramdisk files to modulesArian
2019-10-25shinano-common: Restructure rootdir folderArian
2019-10-25shinano-common: Fix namespace errorsUnpublished
messages during build: device/sony/shinano-common/configs/nfcee_access_debug.xml:4: namespace error : Namespace prefix android for signature on signer is not defined Change-Id: I7f3a1588b9cf05cb6aff11ccc59d14e75cc6e98e
2019-10-25shinano-common: Update proprietary-files.txt for Android 9Arian
* Radio blobs taken from SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_legacy.zip * NFC HAL from 8.1.0 Change-Id: Ic73bc81077cbd53cc1398b91d1a278de7e505988
2019-10-25shinano-common: Add wait4tad_staticArian
2019-10-25rootdir: ueventd: Don't modify permissions of /dev/hw_randomWang Han
This addresses an underlying problem since /dev/hw_random is used. The issue is that EntropyMixer, which runs in system_server, needs to read from /dev/hw_random, but thanks to our qualcomm ueventd, EntropyMixer can never accress this node, resulting in warnings like this: W EntropyMixer: Failed to add HW RNG output to entropy pool W EntropyMixer: java.io.FileNotFoundException: /dev/hw_random (Permission denied) AOSP ueventd handles this well, so just remove this line to get things back to stage. This issue was never exposed because Google derps the logging here, which is already fixed on Pie. https://android.googlesource.com/platform/frameworks/base/+/c78a463e875d91eae2cf256042fd99d130217c38 Change-Id: I42c9aaa8f57306536e51c0a17febad57a5a77581
2019-10-25shinano-common: Move tad_static to 'class core'LuK1337
Change-Id: I00c5cf1b55c4937e2665c84be2130deb3545423d
2019-10-25move the bluetooth mac address to /data/vendorAlin Jerpelea
This change is necessary for selinux permisisons Change-Id: I67c3b1272ef147a440279d7f20418f1e268508d9 Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2019-10-25shinano-common: Don't start supplicant with interfacesRoshan Pius
Framework will now add interface to supplicant (via HIDL) when it needs to control an interface, so don't specify them in the startup params. Bug: 69426063 Test: Device boots up and able to connect to wifi. Change-Id: I817d28093f8b982e3806c212babd888c0f5eb7c0 Signed-off-by: Nikhil Punathil <nikhilpe@gmail.com>
2019-10-25shinano-common: wpa_supplicant: Add support for starting HIDL HAL lazilyRoshan Pius
Bug: 72394251 Test: Able to start supplicant from framework using ISupplicant.getService() Change-Id: I19b8434e7241b9028e7dc86316ec9d5512affcca Signed-off-by: Nikhil Punathil <nikhilpe@gmail.com>
2019-10-25shinano-common: wpa_supplicant: Move control sockets to /data/vendorJeff Vander Stoep
Treble compliance. Bug: 70228425 Bug: 70393317 Test: complete wifi test in b/70393317 Test: verify sockets exist in /data/vendor/wifi/wpa/sockets Change-Id: I0bfc3a351419f0a03498e79664949f353369bf1b Signed-off-by: Nikhil Punathil <nikhilpe@gmail.com>
2019-10-25shinano-common: wpa_supplicant: Deprecate entropy.binJeff Vander Stoep
Wpa_supplicant's random pool is not necessary on Android. Randomness is already provided by the entropymixer service which ensures sufficient entropy is maintained across reboots. Commit b410eb1913 'Initialize /dev/urandom earlier in boot' seeds /dev/urandom with that entropy before either wpa_supplicant or hostapd are run. Bug: 34980020 Test: Use wifi and wifi tethering on Taimen Change-Id: Iaa2a8a42e4e3fd941c5be0f8fa691245cdb429e9 Signed-off-by: Nikhil Punathil <nikhilpe@gmail.com>
2019-10-25shinano: Update timekeep service init rcSpiritCroc
Bring it in line with hardware/sony/timekeep/vendor/etc/init/timekeep.rc Change-Id: I58a716741113b6e5afebc877a6205f8e5d63a476
2019-10-25sepolicy: address timekeep denials [2/2]Vladimir Oltean
* Relabel all /sys/class/rtc files from sysfs to sysfs_rtc so that timekeep has restricted access permission. Change-Id: I583e407fcbf0127698319f68a8f69c969e1a1b49 Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
2019-10-25shinano-common: rootdir: Set sys.usb.ffs.aio_compatJerry Zhang
The kernel does not support aio with ffs. Set the property so adb/mtp know to use the compatible functions, and the same while in recovery. Bug: 37916658 Test: Use adb / use adb in recovery Change-Id: I540b979ee0890aa8e9b20ec7d4332c4193952c46
2019-10-25shinano: Add HVDCP service for QC2.0Andrew Dodd
This is used to enabled HVDCP (Quick Charge 2.0) negotiation Without this service, HVDCP chargers will treat the device as a non-HVDCP-capable one. Signed-off-by: Humberto Borba <humberos@gmail.com> Change-Id: Ic6921af66e86eed3e41c523a5543530c409fda18 (cherry picked from commit 1996c89092a98db01981378a18906f59e6d6f32c)
2019-10-25shinano: add missing socket flag to wpa_supplicantMax Weffers
This fixes WiFi Display on Z3 and Z3C. Change-Id: I9d6c3fe215d0c9de6b1fa38b68d0cf6cc5a2229b
2019-10-25shinano: Set res_info graphics node ownershipOle Birketvedt
* Fixes MHL Change-Id: Ie97ec60eda7024cf859d98c0ed71f3e762c57975
2019-10-25shinano-common: rootdir: Add system and graphics group to chargerArian
2019-10-25shinano-common: fstab: Update usb OTG mount argsnailyk-fr
* Vold now use 'usb' instead of 'usbdisk' for OTG storage. Change-Id: I794a3296786cebb27942b175be3b6a9b49a11d70 Signed-off-by: nailyk-fr <jenkins@nailyk.fr>
2019-10-25shinano: Init: Adjust torch permissions for cam server.nailyk-fr
* The cameraserver has been separated from the media- server with Android N. Hence, camera-related files need to be ownerd by the "camera" group. Chown the flash sysfs to account for this. Otherwise, flash will not work and prevent saving pictures if flash is used. Change-Id: I86c19e555683740db74665c0d0986462c2ef4697 Signed-off-by: nailyk-fr <nailyk_git@nailyk.fr>
2019-10-25shinano-common: Use wpa_supplicant for p2pCraig Tatlor
Change-Id: I61cebaf778545f0953b96b14b50874d61e062b97
2019-10-07shi-m-ano-common: Transition to TARGET_LD_SHIM_LIBSPaul Keith
* Limits security exposure from shims * As a bonus, we no longer need noatsecure to make LD_SHIM_LIBS persist through services Change-Id: I877192422062f3e59c81a7130ad1a2b4be5d1647
2019-10-07audio: audiod is deprecated removemcgi5sr2
* remove the audiod from qcom.rc init file Change-Id: I770b757eaa4c6688a30dafbaa9055a78371da0ae
2019-10-07shinano-common: init: Remove deprecated loc_servicenailyk
Change-Id: I5504c2b631e6826454e174662146dc03632b8d87 Signed-off-by: nailyk <nailyk_git@nailyk.fr>
2019-10-07shinano-common: fstab: Replace zramstreams flagnailyk
* zramstream do not exist anymore in system/core/fs_mgr . Use max_comp_streams instead. Change-Id: Ic84c7b5b59eeaedcf8290c351b094bec0e83e372 Signed-off-by: nailyk <nailyk_git@nailyk.fr>
2019-10-07shinano-common: early-mount systemArian
2019-10-07shinano-common: init: Correct taimport pathnailyk
Change-Id: I40784085c259de7bb7b1ed01408df87704065a6c Signed-off-by: nailyk <nailyk_git@nailyk.fr> Signed-off-by: Arian <arian.kulmer@web.de>
2019-10-07shinano-common: init: Remove old 'tad' usernailyk
Change-Id: I6ac02c26a39e14660b0e397abccda0680e3a53da Signed-off-by: nailyk <nailyk_git@nailyk.fr> Signed-off-by: Arian <arian.kulmer@web.de>
2019-10-07shinano: Move shell scripts to system/vendor.Alexander Diewald
* Scripts use the /system/vendor/bin/sh shebang now. * Move shell scripts from system/etc to vendor/system/bin. * Adjust init files. Change-Id: Ib0b9eb59305425b415e2681e7943f9ebfa6480d4 Signed-off-by: Alexander Diewald <Diewi@diewald-net.com> Signed-off-by: Arian <arian.kulmer@web.de>
2019-10-07shinano:rename camera blob to camera.vendor.qcomMax Weffers
Change-Id: If1180961ccdb10c1fd63fd2fac9276148047ab47
2019-10-07shinano: init: Change gpsone locationnailyk
* E/failed to change mode for /data/misc/location/gpsone_d/gpsone_loc_api_q, error = No such file or directory Change-Id: Ib324233c35bcefbb139fd1613f773b290a97b10b Signed-off-by: nailyk <nailyk_git@nailyk.fr>
2019-10-07shinano: sepolicy: seclabel the netmgrd service.Alexander Diewald
Change-Id: Idea087c18e632e9d6a43ddb4b8275a9b1510d224 Signed-off-by: Alexander Diewald <Diewi@diewald-net.com>
2019-10-07shinano: fix led light permissionsMax Weffers
Change-Id: Iab7abd2d5e43ce4cd855f8612cb7b2ebbe6b762a
2019-10-07shinano: move shims to vendorMax Weffers
Change-Id: Iee818f5a42056206e9dfd5fcc6f1c52ce3b69df3
2019-10-07shinano: init: Adjust vendor service path.Alexander Diewald
* In order to be compliant with the proprietary file locations, adjust the path to the binaries in the init files. The blob binaries have been moved from "/system/bin" to "/system/vendor/bin" * The idea behind the move is to profit from qcom's sepolicy file labelling. Change-Id: I78b96730638258ffd54640f7951ceebc7f503fc4 Signed-off-by: Alexander Diewald <Diewi@diewald-net.com>
2019-10-07shinano: Define SEpolicy for adsprpcd.Alexander Diewald
* Define the ioctls and grant access to the socket. * Allow access to qseecom socket. * Label adsprpcd service appropriately. Change-Id: I4a0ccd322b16c30e7f10dccc1278ed17507d56e2 Signed-off-by: Alexander Diewald <Diewi@diewald-net.com>
2019-10-07shinano: Fix the loc_launcher path in init.Alexander Diewald
Change-Id: I7a4e366f1e06a569035b1ab3fc2acb7c91057a4f Signed-off-by: Alexander Diewald <Diewi@diewald-net.com>
2019-10-07shinano-common: Update ZRAM size to .291 valueMax Weffers
Change-Id: I0d20764367926d22cf230feb6cd36a628bf90e58
2019-10-07shinano: init: Set correct permission to sony camera infoMax Weffers
Change-Id: Ibb373dac77f75c4962768ceed432b8f7fe175460
2019-10-07shinano: Rework qcom.power initKeita Espinoza
- Boot phone in interactive mode instead of performance - Add TWRP config Squashed with: shinano-common: init: Add back init.recovery * Add back init.recovery to copy file with the real name instead of copy/rename at the same operation. * Import init.qcom.power from init.recovery to allow mitigation on recovery. * Create bootdevice symlink as lot of zip use it. Rework qcom.power init change ID: Change-Id: I647c09e430bc3904ff526ed662191e7d3b833e0b
2019-10-07Shinano-common: init: Rework credmgr init scriptnailyk-fr
* Next to the AIDs remove credmgrd init script need some reworks. Root perm at startup is needed for chmod/chown. Change-Id: I9373820c8d0d2fc68e25d671ffbf638fead75316
2019-10-07shinano-common: init: Get rid of oem usersnailyk-fr
* Camera can work without sony specific users. Remove them. Change-Id: Idb359fa33532c1fa2b8f042362bb027f76ec31e4
2019-10-07shinano-common: init: Rework users for mediaservernailyk-fr
Change-Id: Ie2ed042cfc5e97a71e0485fc048580b9f04cf694
2019-10-07shinano: use libsensor shims for cameraMax Weffers
Change-Id: Iee2115a8143b501f0cf265a650351c291e8006f2
2019-10-07shianno-common: usb: rootdir: Enable FunctionFSLuK1337
Change-Id: I12ff6e794e6993940284e6dfb48b718c40fdd3b1
2019-10-07shinano: Add Timekeep.Alexander Diewald
Adds the init lines required to launch timekeep. They will be moved to msm8974-common in future along with other qcom/msm8974-specific init statements. Change-Id: If21402553dbeaf77e40885dae58e9f376fe85798 Signed-off-by: Alexander Diewald <Diewi@diewald-net.com>
2019-10-07shinano: Add shims for camera startMax Weffers
Change-Id: I1fee8c6ff28e2011d85cc6fa18c01560af12c8dc
2019-10-07Fix mm-qcam missing symbolnailyk-fr
Change-Id: I2d8304da9ca128e59df8e324330842ad46638e04
2019-10-07shinano-common: init: Change idd pathnailyk-fr
Change-Id: Ifa282ce22563f513cbd632084346e6f6bd2af059
2019-10-07shinano-common: init: Use obscur oreo UID/GID 2/2nailyk-fr
* Correct some sed mistakes. Change-Id: I9f08615c0e622740fdc7ab80b25855dc03c87a74
2019-10-07shinano-common: init: Replace on post-fsklemmm
* Init class on post-fs has been deprecated. Use on post-fs-data instead. * Don't create /cache/credmgr.log (it prevented initcredmgr from starting) Change-Id: Icf275a51de665cfeb28e9f860a64a38bf4226b6a
2019-10-07shinano-common: init: Use obscur oreo UID/GIDnailyk-fr
* With oreo all the AIDs process change. According to https://source.android.com/devices/tech/config/filesystem#using-an-oem-specific-aid user firendly names cannot be used anymore. Use oem_<uid> name instead. See msm8974-common related change for reference. Change-Id: I18294c5ba716a6c2ba038b9f624f5ae65f799e1f
2019-10-07shinano-common: fix missing Bluetooth-Labels in ueventdMax Weffers
Change-Id: I4c1d6b7201a09561240f193daab23e4ba8d39e8a
2019-10-07shinano: rootdir: init: set wifi user for bcmdhd firmware pathMax Weffers
Change-Id: I4382b2e151cfa98a75a4be60c71d19a01145dc79
2019-10-07shinano-common: init: Add system group to netmgrd processAbhinav Kannan
To allow netmgrd to acquire wakelocks correctly we need to ensure that it belongs to system group Bug: 24546055 Change-Id: I6231c7d1eb57a12da9be4f081e085e6f1d43b797
2019-10-07shinano-common: Replace QCOM group identifiers with oem_XXXXintervigilium
* config.fs doesn't give the ability to add AIDs to Android init such that they can can actually be used in init scripts. * Replace instances of qcom_diag, rfs, rfs_shared with the appropriate IDs (2950, 3012, 3013) Change-Id: Ided896c4ee051a9bc19fd61ae6e03624f2d54cf3
2019-10-07shinano-common: rootdir: replace net_bt_admin and net_bt_stack group with ↵Arian
bluetooth group
2019-10-07shinano: init: rename charger service pathMax Weffers
Change-Id: Ie7c0ecaf48622c8d0bd47591d819e608c7d40fb8
2019-10-07shinano: move wpa supplicant paths to vendor/bin/hwtomascus
Change-Id: Iab1ab0ba085d3eb59f50d97079531ab77bf58ad2
2019-10-07sony-common: update debugfs mount as AOSPDavid
https://android.googlesource.com/platform/system/core/+/android-6.0.1_r68/rootdir/init.rc#21 why this .... Debugfs exists as a simple way for kernel developers to make information available to user space also it is not enabled in android-6.0.1_r66 tag and not more in N but for development purposes it is needed here ..... Change-Id: Ic332aeb073edd09b38de756e89b2d98582bc5c79 Signed-off-by: David Viteri <davidteri91@gmail.com> Signed-off-by: Nikhil Punathil <nikhilpe@gmail.com>
2017-09-27Grant netmgrd proper unix permsJeff Vander Stoep
Do not grant DAC override permission which would allow this daemon unix permissions to everything. avc: denied { dac_override } for capability=1 scontext=u:r:netmgrd:s0 tcontext=u:r:netmgrd:s0 tclass=capability Adding wifi group to access /data/misc/net/rt_tables -rw-r--r-- 1 system wifi 130 2016-05-11 09:58 rt_tables wakelock group to access: /sys/power/wake_lock -rw-rw---- 1 radio wakelock 4096 1970-01-19 15:03 wake_lock radio/inet groups to access /dev/socket/netmgr/netmgr_connect_socket srw-rw---- 1 radio inet 0 1970-01-19 15:03 netmgr_connect_socket Change-Id: I7ed6a98dd85bf7efa8cab0b8a0851217f030ba8b
2017-08-23shinano-common: remove libwvm shimSteven Lay
* With the introduction of kipper widevine blobs, a shim for libwvm is no longer necessary Change-Id: I82c44e74dcdbb88e50536ca23c64fe2927b5f1eb
2017-08-23shinano-common: readd tad_statictomascus
* Moved from vendor repos * Also remove the associated product_packages copying Change-Id: I28a906e0bd0c08bba20d22d25122f99bd84669a8
2017-08-18shinano: Update fstab parametersKeita Espinoza
Remove "data=ordered" as this is the default value. Remove "errors=panic" Removed msm_sdcc.3 mount Change-Id: Id1496dd8f69667a806eddab9b33bcfbe12590bc8
2017-08-05shinano-common: init: Use late_start for rild2nailyk-fr
* When encrypted the rild2 daemon is started at early stage and data are not yet decrypted. Change class to late_start to ensure data avaiablity before starting rild2 Change-Id: Ia1d5cd26032e19c1cb66f05c0a6897a363132184
2017-07-30shinano: Rework qcom.power initKeita Espinoza
- Boot phone in interactive mode instead of performance - Add TWRP config Change-Id: I647c09e430bc3904ff526ed662191e7d3b833e0b
2017-07-19shinano-common: remove IMS based servicesSteven Lay
* Not sure if this worked anyway Change-Id: Ie2910210229c7ba2c2d7d28cb5c1dcba7ad0cff5
2017-07-19shinano: Move idd to proprietary sony rcKeita Espinoza
Change-Id: I63c28db08b4a21c071a93e1b459071d253560f92
2017-07-07shinano-common: revert CPUQuiet infrastructureSteven Lay
As we are returning to MPDecision. * Restore MPDecision service * Remove CPUQuiet related ueventd rules * Remove RQBalance configuration file * Interactive CPUFreq settings based on Bacon Change-Id: If6cf04841083be2f3ded50c4f20d600f0c74d339
2017-07-01shinano: Rename init.device-commonxkeita
Rename it to reflect that the init is platform specific (i.e: shinano, rhine, etc). Change-Id: Ic12bedb317ebce2757c307a4de3dbc8f693f5a31
2017-07-01shinano: Set correct owner to PM8941-flashxkeita
Change-Id: I4b4efddf28c00eaa3c46cf7a1cd75fbf2d015a73
2017-07-01shinano: Remove duplicated PM8941 entriesxkeita
These are common to all sony msm8974 devices Change-Id: Ia5450d6997c2e71646ad0787e095b17195aa10e4
2017-07-01shinano: init: Remove duplicated entriesxkeita
These are already defined by init.rc Change-Id: I31d57f8b1e2a028fd25c4190d57dc6ccad7f643f
2017-06-30shinano-common: Add Hexagon DSP servicexkeita
- Values taken from stock .291 kernel Change-Id: Ia51d9ea493518b7a917e39992720ae9df18cefaa
2017-06-29shinano-common: remove scdnotifier_nitz serviceSteven Lay
Seems obsolete now, time syncing works fine without it. Change-Id: I76b4e44d05c66b059497a17e1776e2255bb00549
2017-06-28shinano: Make TFA9890 service shinano specificxkeita
Change-Id: I89f1d1e6c3eab501b74c273d1d7ebdca3188c063
2017-06-28shinano: Add wlan0 interface propxkeita
Change-Id: I90345c3235a3feaf64148ff05f67648515ca9f34
2017-06-25shinano: init: Fix init.device-common importxkeita
Change-Id: I04a4d171ef95dc43c6fc59f6ee2075b827ec6c4d
2017-06-25shinano-common: Set max mA for chargingxkeita
- Based on msm8974 dts kernel config - This replaces the need for the entry in thermanager.xml Change-Id: I6973d2c21212dc1b7816b5a0174812159f6e41d9
2017-06-25shinano: init: Set correct time-daemon groupxkeita
- Reference from .291 kernel Change-Id: Icaed3621992238c5815bdb8ca9ca0861104aa5f2
2017-06-25shinano: init: Remove msm-adreno-tz flagxkeita
- msm-adreno-tz is set by default, this line should only be used if we wanted to set a different governor under different powermodes. Change-Id: I0357e2d4e77191470c2af6121cf4273e0fd67f7a
2017-06-25shinano: init: Commonize init.device.rcxkeita
- Add common init.device.rc for shinano devices. Change-Id: I9793279a529551106cf31dc1c39844fa9274bb5b
2017-06-25shinano: init: Update bluetooth initxkeita
- Based on stock .291 kernel - Removed proto entries (they aren't used with IOCTL wake controller) - bluetooth timeout ms is no longer used by libbt Change-Id: Iddafa7217ea84238cdbe218c24ecf2f85cac615c
2017-06-24shinano: init: Remove deprecated init entriesxkeita
- We don't use chargemon anymore (now it's healthd) remove unused/deprecated entries. - Remove debug_mask (doesn't exists here) Change-Id: Ic61ec552504691a725e5a3ac89bbbf730a703474
2017-06-24shinano-common: camera: Enable sonycamera proprietary capabilitiesxkeita
Sony camera blobs are encrypted, so they need com.sonyericsson.permission.CAMERA_EXTENDED permission from original camera to be present in apk to enable Sony custom options (4k video, iso settings, etc) camera.qcom.so checks if this permission is available in current camera app but it can be bypassed when "ro.build.type=eng" thus enabling Sony camera options. The point of this shim is to make camera.qcom.so believe that we're currently on an engineering android rom so it bypasses the permission check allowing camera apps to have full capabilities. ----------------------------------------------------------------------- Credits to Balázs Triszka from sony-kitakami Change-Id: I14ef800608c7ed7a95921dd71a56702ed2d68b18 ----------------------------------------------------------------------- Change-Id: I2052aa30fbd30a730ea7b9c60b98f35f99314a51
2017-06-23shinano-common: Add ril-daemon2 service for dsds modelsxkeita
Change-Id: I4d6263e6f475c79c68d6d5c7c7903d28822e37f0
2017-06-17shinano: Remove CNE propsxkeita
Change-Id: I5c0a524da2c3149025f3a931e953350ea723eeb3
2017-06-14shinano-common: use bfq iosched after boot completetomascus
Change-Id: I1dbbaf3f0f4da8c7bff31210d43b27fb6f138b39
2017-06-14shinano-common: move iosched setting to init.qcom.powertomascus
It feels more right to place it together with CPU freq settings Also, it's like this on almost every other device Change-Id: I2b70392acd43a30f776b17fee3b20153ff268d6a
2017-05-31Migrate to new RQBalance-PowerHAL's XML configurationAngelo G. Del Regno
The new RQBalance-PowerHAL deprecates configuration through Android properties. Now the configuration is parsed from an XML, located at /system/etc/rqbalance_config.xml. Change-Id: Iebc85a4f420e9b471139063a03a3831f95be5e28
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 01:43:57 +0000