diff options
Diffstat (limited to 'pn54x/libnfc-nxp-PN553_example.conf')
-rw-r--r-- | pn54x/libnfc-nxp-PN553_example.conf | 447 |
1 files changed, 447 insertions, 0 deletions
diff --git a/pn54x/libnfc-nxp-PN553_example.conf b/pn54x/libnfc-nxp-PN553_example.conf new file mode 100644 index 0000000..818e473 --- /dev/null +++ b/pn54x/libnfc-nxp-PN553_example.conf @@ -0,0 +1,447 @@ +## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) +## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) +############################################################################### +# Application options +# Logging Levels +# NXPLOG_DEFAULT_LOGLEVEL 0x01 +# ANDROID_LOG_DEBUG 0x03 +# ANDROID_LOG_WARN 0x02 +# ANDROID_LOG_ERROR 0x01 +# ANDROID_LOG_SILENT 0x00 +NXPLOG_EXTNS_LOGLEVEL=0x03 +NXPLOG_NCIHAL_LOGLEVEL=0x03 +NXPLOG_NCIX_LOGLEVEL=0x03 +NXPLOG_NCIR_LOGLEVEL=0x03 +NXPLOG_FWDNLD_LOGLEVEL=0x03 +NXPLOG_TML_LOGLEVEL=0x03 + +############################################################################### +# Nfc Device Node name +NXP_NFC_DEV_NODE="/dev/pn553" + +############################################################################### +# Extension for Mifare reader enable +MIFARE_READER_ENABLE=0x01 + +############################################################################### +# Vzw Feature enable +VZW_FEATURE_ENABLE=0x01 + +############################################################################### +# File name for Firmware +NXP_FW_NAME="libpn553_fw.so" + +############################################################################### +# System clock source selection configuration +#define CLK_SRC_XTAL 1 +#define CLK_SRC_PLL 2 +NXP_SYS_CLK_SRC_SEL=0x02 + +############################################################################### +# System clock frequency selection configuration +#define CLK_FREQ_13MHZ 1 +#define CLK_FREQ_19_2MHZ 2 +#define CLK_FREQ_24MHZ 3 +#define CLK_FREQ_26MHZ 4 +#define CLK_FREQ_38_4MHZ 5 +#define CLK_FREQ_52MHZ 6 +NXP_SYS_CLK_FREQ_SEL=0x02 + +############################################################################### +# The timeout value to be used for clock request acknowledgment +# min value = 0x01 to max = 0x06 +NXP_SYS_CLOCK_TO_CFG=0x01 + +############################################################################### +# NXP proprietary settings +NXP_ACT_PROP_EXTN={2F, 02, 00} + +############################################################################### +# NFC forum profile settings +NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} + +############################################################################### +# NFCC Configuration Control +# Allow NFCC to manage RF Config 0x01 +# Don't allow NFCC to manage RF Config 0x00 +NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} + +############################################################################### +# Standby enable settings +#NXP_CORE_STANDBY={2F, 00, 01, 01} + +############################################################################### +# NXP TVDD configurations settings +# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, +# out of them only one can be configured at a time. +NXP_EXT_TVDD_CFG=0x02 + +############################################################################### +#config1:SLALM, 3.3V for both RM and CM +NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} + +############################################################################### +#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, +#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms +NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} + +############################################################################### +# NXP RF configuration ALM/PLM settings +# This section needs to be updated with the correct values based on the platform +#NXP_RF_CONF_BLK_1={ +#} + +############################################################################### +# NXP RF configuration ALM/PLM settings +# This section needs to be updated with the correct values based on the platform +#NXP_RF_CONF_BLK_2={ +#} + +############################################################################### +# NXP RF configuration ALM/PLM settings +# This section needs to be updated with the correct values based on the platform +#NXP_RF_CONF_BLK_3={ +#} + +############################################################################### +# NXP RF configuration ALM/PLM settings +# This section needs to be updated with the correct values based on the platform +#NXP_RF_CONF_BLK_4={ +#} + +############################################################################### +# NXP RF configuration ALM/PLM settings +# This section needs to be updated with the correct values based on the platform +#NXP_RF_CONF_BLK_5={ +#} + +############################################################################### +# NXP RF configuration ALM/PLM settings +# This section needs to be updated with the correct values based on the platform +#NXP_RF_CONF_BLK_6={ +#} + +############################################################################### +# Set configuration optimization decision setting +# Enable = 0x01 +# Disable = 0x00 +NXP_SET_CONFIG_ALWAYS=0x00 + +############################################################################### +# Core configuration extensions +# It includes +# Wired mode settings A0ED, A0EE +# Tag Detector A040, A041, A043 +# Low Power mode A007 +# Clock settings A002, A003 +# PbF settings A008 +# Clock timeout settings A004 +# eSE (SVDD) PWR REQ settings A0F2 +# How eSE connected to PN553 A012 +# UICC2 bit rate A0D1 +# SWP1A interface A0D4 +# DWP intf behavior config, SVDD Load activated by default if set to 0x31 - A037 +NXP_CORE_CONF_EXTN={20, 02, 25, 09, + A0, EC, 01, 01, + A0, ED, 01, 00, + A0, 5E, 01, 01, + A0, 12, 01, 02, + A0, 40, 01, 01, + A0, DD, 01, 2D, + A0, D1, 01, 02, + A0, D4, 01, 01, + A0, 37, 01, 35 + } +# A0, F2, 01, 01, +# A0, 40, 01, 01, +# A0, 41, 01, 02, +# A0, 43, 01, 04, +# A0, 02, 01, 01, +# A0, 03, 01, 11, +# A0, 07, 01, 03, +# A0, 08, 01, 01 +# } + +############################################################################### +# Core configuration rf field filter settings to enable set to 01 to disable set +# to 00 last bit +NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } + +############################################################################### +# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set +# to 0x00 +NXP_I2C_FRAGMENTATION_ENABLED=0x00 + +############################################################################### +# Core configuration settings +NXP_CORE_CONF={ 20, 02, 2E, 0E, + 28, 01, 00, + 21, 01, 00, + 30, 01, 08, + 31, 01, 03, + 32, 01, 60, + 38, 01, 01, + 33, 04, 01, 02, 03, 04, + 54, 01, 06, + 50, 01, 02, + 5B, 01, 00, + 80, 01, 01, + 81, 01, 01, + 82, 01, 0E, + 18, 01, 01 + } + +############################################################################### +# Mifare Classic Key settings +#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, +# A0, 52, 06, D3, F7, D3, F7, D3, F7, +# A0, 53, 06, FF, FF, FF, FF, FF, FF, +# A0, 54, 06, 00, 00, 00, 00, 00, 00} + + +############################################################################### +# Default SE Options +# No secure element 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x04 + +NXP_DEFAULT_SE=0x07 + +############################################################################### +#Enable SWP full power mode when phone is power off +NXP_SWP_FULL_PWR_ON=0x00 + +############################################################################### +#### Select the CHIP #### +#PN547C2 0x01 +#PN65T 0x02 +#PN548AD 0x03 +#PN66T 0x04 +#PN551 0x05 +#PN67T 0x06 +#PN553 0x07 +#PN80T 0x08 +NXP_NFC_CHIP=0x07 + +############################################################################### +# CE when Screen state is locked +# This setting is for DEFAULT_AID_ROUTE, +# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE +# Disable 0x00 +# Enable 0x01 +NXP_CE_ROUTE_STRICT_DISABLE=0x01 + +############################################################################### +#Timeout in secs to get NFCEE Discover notification +NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 + +############################################################################### +NXP_DEFAULT_NFCEE_TIMEOUT=20 + +############################################################################### +#Timeout in secs +NXP_SWP_RD_START_TIMEOUT=0x0A + +############################################################################### +#Timeout in secs +NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 + +############################################################################### +#Set the default AID route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_AID_ROUTE=0x00 + +############################################################################### +#Set the Mifare Desfire route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_DESFIRE_ROUTE=0x02 + +############################################################################### +#Set the Mifare CLT route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_MIFARE_CLT_ROUTE=0x02 + +############################################################################### +#Set the default AID Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Lock +# bit pos 4 = Screen Off +DEFAULT_AID_PWR_STATE=0x19 + +############################################################################### +#Set the Mifare Desfire Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Lock +# bit pos 4 = Screen Off +DEFAULT_DESFIRE_PWR_STATE=0x1B + +############################################################################### +#Set the Mifare CLT Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Lock +# bit pos 4 = Screen Off +DEFAULT_MIFARE_CLT_PWR_STATE=0x1B + +############################################################################### +#Set the Felica CLT route Location : +#This settings will be used when application does not set this parameter +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_FELICA_CLT_ROUTE=0x01 + +############################################################################### +#Set the Felica CLT Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Lock +# bit pos 4 = Screen Off +DEFAULT_FELICA_CLT_PWR_STATE=0x1B + +############################################################################### +# AID Matching platform options +# AID_MATCHING_L 0x01 +# AID_MATCHING_K 0x02 +AID_MATCHING_PLATFORM=0x01 + +############################################################################### +# P61 interface options +# NFC 0x01 +# SPI 0x02 +NXP_P61_LS_DEFAULT_INTERFACE=0x01 + +############################################################################### +# P61 LTSM interface options +# NFC 0x01 +# SPI 0x02 +NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 + +############################################################################### +#CHINA_TIANJIN_RF_SETTING +#Enable 0x01 +#Disable 0x00 +NXP_CHINA_TIANJIN_RF_ENABLED=0x01 + +############################################################################### +#SWP_SWITCH_TIMEOUT_SETTING +# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. +# Timeout in milliseconds, for example +# No Timeout 0x00 +# 10 millisecond timeout 0x0A +NXP_SWP_SWITCH_TIMEOUT=0x0A + +############################################################################### +# P61 interface options for JCOP Download +# NFC 0x01 +# SPI 0x02 +NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 + +############################################################################### +# P61 JCOP OS download options +# FRAMEWORK API BY APPLICATION 0x00 +# AT BOOT_TIME 0x01 +NXP_JCOPDL_AT_BOOT_ENABLE=0x00 + +############################################################################### +# Loader service version +# NFC service checks for LS version 2.0 or 2.1 +# LS2.0 0x20 +# LS2.1 0x21 +# LS2.2 0x22 +# AT NFC service intialization +NXP_LOADER_SERVICE_VERSION=0x22 + +############################################################################### +#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 +#msec to 20000 msec and zero is to disable. +NXP_NFCC_STANDBY_TIMEOUT=20000 + +############################################################################### +#Dynamic RSSI feature enable +# Disable 0x00 +# Enable 0x01 +NXP_AGC_DEBUG_ENABLE=0x00 + +############################################################################### +#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode +# For Technology routing to ESE Technology Mask = 4 +# For ISO-DEP Protocol routing to ESE Mask = 2 +# It can also take TECH|PROTO = 6 +# To ignore the delay set mask to = 0 +NXP_ESE_WIRED_PRT_MASK=0x00 + +############################################################################### +#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode +#For Technology routing to UICC Technology Mask = 4 +#For ISO-DEP Protocol routing to UICC set Mask = 2 +#For Select AID Routing to UICC set Mask = 1 +#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay +#set mask = 0 +NXP_UICC_WIRED_PRT_MASK=0x00 + +############################################################################### +#RF field true delay Wired Mode +# delay wired mode = 1 +# allow wired mode = 0 +NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 + +############################################################################### +#Config to allow adding aids +#NFC on/off is required after this config +#1 = enabling adding aid to NFCC routing table. +#0 = disabling adding aid to NFCC routing table. +NXP_ENABLE_ADD_AID=0x01 + +############################################################################### +# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal +# JCOP CP TIMEOUT +NXP_CP_TIMEOUT={00, 77} + +############################################################################### +# Enable/Disable checking default proto SE Id +# Disable 0x00 +# Enable 0x01 +NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 + +############################################################################### +#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE +#Enable/Disable block number checks for china transit use case +#Enable 0x01 +#Disable 0x00 +NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 + +############################################################################### +# Restrict routing to first matched rule only. +# Blacklist enable 0x01 +# Blacklist disable 0x00 +NXP_PROP_BLACKLIST_ROUTING=0x00 + +############################################################################### +# Timeout value in milliseconds to send response for Felica command received +NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 + +###############################################################################
\ No newline at end of file |