1 files changed, 0 insertions, 125 deletions
diff --git a/gps/gps.conf b/gps/gps.conf
deleted file mode 100644
index e0ce546..0000000
--- a/gps/gps.conf
+++ /dev/null
@@ -1,125 +0,0 @@
-#Uncommenting these urls would only enable
-#the power up auto injection and force injection(test case).
-XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin
-XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin
-XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin
-
-#Version check for XTRA
-#DISABLE = 0
-#AUTO    = 1
-#XTRA2   = 2
-#XTRA3   = 3
-XTRA_VERSION_CHECK=0
-
-# Error Estimate
-# _SET = 1
-# _CLEAR = 0
-ERR_ESTIMATE=0
-
-#Test
-NTP_SERVER=time.gpsonextra.net
-#Asia
-# NTP_SERVER=asia.pool.ntp.org
-#Europe
-# NTP_SERVER=europe.pool.ntp.org
-#North America
-# NTP_SERVER=north-america.pool.ntp.org
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 2
-
-# Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=0
-
-# Below bit mask configures how GPS functionalities
-# should be locked when user turns off GPS on Settings
-# Set bit 0x1 if MO GPS functionalities are to be locked
-# Set bit 0x2 if NI GPS functionalities are to be locked
-# default - non is locked for backward compatibility
-GPS_LOCK = 3
-
-# supl version 2.0
-SUPL_VER=0x20000
-
-# Emergency SUPL, 1=enable, 0=disable
-SUPL_ES=0
-
-#Choose PDN for Emergency SUPL
-#1 - Use emergency PDN
-#0 - Use regular SUPL PDN for Emergency SUPL
-USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
-
-#SUPL_MODE is a bit mask set in config.xml per carrier by default.
-#If it is uncommented here, this value will over write the value from
-#config.xml.
-#MSA=0X2
-#MSB=0X1
-#SUPL_MODE=
-
-# GPS Capabilities bit mask
-# SCHEDULING = 0x01
-# MSB = 0x02
-# MSA = 0x04
-# ON_DEMAND_TIME = 0x10
-# GEOFENCE = 0x20
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
-CAPABILITIES=0x13
-
-# Accuracy threshold for intermediate positions
-# less accurate positions are ignored, 0 for passing all positions
-# ACCURACY_THRES=5000
-
-################################
-##### AGPS server settings #####
-################################
-
-# FOR SUPL SUPPORT, set the following
-SUPL_HOST=supl.sonyericsson.com
-SUPL_PORT=7275
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
-# Bitmask of slots that are available
-# for write/install to, where 1s indicate writable,
-# and the default value is 0 where no slots
-# are writable. For example, AGPS_CERT_WRITABLE_MASK
-# of b1000001010 makes 3 slots available
-# and the remaining 7 slots unwritable.
-#AGPS_CERT_WRITABLE_MASK=0
-
-####################################
-#  LTE Positioning Profile Settings
-####################################
-# 0: Enable RRLP on LTE(Default)
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 0
-
-################################
-# EXTRA SETTINGS
-################################
-# NMEA provider (1=Modem Processor, 0=Application Processor)
-NMEA_PROVIDER=0
-# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
-SGLTE_TARGET=0
-
-##################################################
-# Select Positioning Protocol on A-GLONASS system
-##################################################
-# 0x1: RRC CPlane
-# 0x2: RRLP UPlane
-# 0x4: LLP Uplane
-A_GLONASS_POS_PROTOCOL_SELECT = 0x2
-
-###########################################
-# Enable/Disable reading H-SLP address and
-# certificates from the SIM card
-###########################################
-# 0: Disable (Default)
-# 1: Enable
-ENABLE_READ_FROM_SIM = 0