diff options
| -rw-r--r-- | gps/flp.conf | 60 | ||||
| -rw-r--r-- | gps/gps.conf | 125 | ||||
| -rw-r--r-- | gps/izat.conf | 196 | ||||
| -rw-r--r-- | gps/sap.conf | 53 | ||||
| -rw-r--r-- | shinano.mk | 11 |
5 files changed, 0 insertions, 445 deletions
diff --git a/gps/flp.conf b/gps/flp.conf deleted file mode 100644 index 78f4a62..0000000 --- a/gps/flp.conf +++ /dev/null @@ -1,60 +0,0 @@ -################################### -##### FLP settings ##### -################################### - -################################### -# FLP BATCHING SIZE -################################### -# The number of batched locations -# requested to modem. The desired number -# defined below may not be satisfied, as -# the modem can only return the number -# of batched locations that can be allocated, -# which is limited by memory. The default -# batch size defined as 20 as below. -BATCH_SIZE=20 - -################################### -# FLP BATCHING SESSION TIMEOUT -################################### -# Duration with which batch session timeout -# happens in milliseconds. If not specified -# or set to zero, batching session timeout -# defaults to 20 seconds by the modem. -# BATCH_SESSION_TIMEOUT=20000 - -################################### -# FLP CAPABILITIES BIT MASK -################################### -# GEOFENCE = 0x01 -# BATCHING = 0x02 -# default = GEOFENCE | BATCHING -CAPABILITIES=0x01 - -################################### -# FLP BATCHING ACCURACY -################################### -# Set to one of the defined values below -# to define the accuracy of batching. -# If not specified, accuracy defaults -# to LOW. -# FLP BATCHING ACCURACY values: -# Low accuracy = 0 -# Medium accuracy = 1 -# High accuracy = 2 -ACCURACY=0 - -################################### -# FLP GEOFENCE RESPONSIVENESS -################################### -# If set to one of the defined values below, -# it will override the responsiveness for -# FLP geofence, which implements the fused -# location API. If not set to a value defined -# below, which is default, it will not -# override the responsivness. -# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values: -# 1: LOW responsiveness -# 2: MEDIUM responsiveness -# 3: HIGH responsiveness -FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0 diff --git a/gps/gps.conf b/gps/gps.conf deleted file mode 100644 index e0ce546..0000000 --- a/gps/gps.conf +++ /dev/null @@ -1,125 +0,0 @@ -#Uncommenting these urls would only enable -#the power up auto injection and force injection(test case). -XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin -XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin -XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin - -#Version check for XTRA -#DISABLE = 0 -#AUTO = 1 -#XTRA2 = 2 -#XTRA3 = 3 -XTRA_VERSION_CHECK=0 - -# Error Estimate -# _SET = 1 -# _CLEAR = 0 -ERR_ESTIMATE=0 - -#Test -NTP_SERVER=time.gpsonextra.net -#Asia -# NTP_SERVER=asia.pool.ntp.org -#Europe -# NTP_SERVER=europe.pool.ntp.org -#North America -# NTP_SERVER=north-america.pool.ntp.org - -# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info -# 4 - Debug, 5 - Verbose -# If DEBUG_LEVEL is commented, Android's logging levels will be used -DEBUG_LEVEL = 2 - -# Intermediate position report, 1=enable, 0=disable -INTERMEDIATE_POS=0 - -# Below bit mask configures how GPS functionalities -# should be locked when user turns off GPS on Settings -# Set bit 0x1 if MO GPS functionalities are to be locked -# Set bit 0x2 if NI GPS functionalities are to be locked -# default - non is locked for backward compatibility -GPS_LOCK = 3 - -# supl version 2.0 -SUPL_VER=0x20000 - -# Emergency SUPL, 1=enable, 0=disable -SUPL_ES=0 - -#Choose PDN for Emergency SUPL -#1 - Use emergency PDN -#0 - Use regular SUPL PDN for Emergency SUPL -USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 - -#SUPL_MODE is a bit mask set in config.xml per carrier by default. -#If it is uncommented here, this value will over write the value from -#config.xml. -#MSA=0X2 -#MSB=0X1 -#SUPL_MODE= - -# GPS Capabilities bit mask -# SCHEDULING = 0x01 -# MSB = 0x02 -# MSA = 0x04 -# ON_DEMAND_TIME = 0x10 -# GEOFENCE = 0x20 -# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE -CAPABILITIES=0x13 - -# Accuracy threshold for intermediate positions -# less accurate positions are ignored, 0 for passing all positions -# ACCURACY_THRES=5000 - -################################ -##### AGPS server settings ##### -################################ - -# FOR SUPL SUPPORT, set the following -SUPL_HOST=supl.sonyericsson.com -SUPL_PORT=7275 - -# FOR C2K PDE SUPPORT, set the following -# C2K_HOST=c2k.pde.com or IP -# C2K_PORT=1234 - -# Bitmask of slots that are available -# for write/install to, where 1s indicate writable, -# and the default value is 0 where no slots -# are writable. For example, AGPS_CERT_WRITABLE_MASK -# of b1000001010 makes 3 slots available -# and the remaining 7 slots unwritable. -#AGPS_CERT_WRITABLE_MASK=0 - -#################################### -# LTE Positioning Profile Settings -#################################### -# 0: Enable RRLP on LTE(Default) -# 1: Enable LPP_User_Plane on LTE -# 2: Enable LPP_Control_Plane -# 3: Enable both LPP_User_Plane and LPP_Control_Plane -LPP_PROFILE = 0 - -################################ -# EXTRA SETTINGS -################################ -# NMEA provider (1=Modem Processor, 0=Application Processor) -NMEA_PROVIDER=0 -# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) -SGLTE_TARGET=0 - -################################################## -# Select Positioning Protocol on A-GLONASS system -################################################## -# 0x1: RRC CPlane -# 0x2: RRLP UPlane -# 0x4: LLP Uplane -A_GLONASS_POS_PROTOCOL_SELECT = 0x2 - -########################################### -# Enable/Disable reading H-SLP address and -# certificates from the SIM card -########################################### -# 0: Disable (Default) -# 1: Enable -ENABLE_READ_FROM_SIM = 0 diff --git a/gps/izat.conf b/gps/izat.conf deleted file mode 100644 index 009bddb..0000000 --- a/gps/izat.conf +++ /dev/null @@ -1,196 +0,0 @@ -######################################### -# Log verbosity control for izat modules -######################################### -# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5 -IZAT_DEBUG_LEVEL = 2 - -################################################## -# Select WIFI Wait Timeout value in seconds for SUPL -################################################## -WIFI_WAIT_TIMEOUT_SELECT = 0 - -################################ -# NLP Settings -################################ -# NLP_MODE 1: GNP Only, 2: QNP Only, 3: Combo -# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode -# to determine how much Tolerance for first position -# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode -# to determine how much Tolerance for positions after first -# NLP_THRESHOLD: Sets how many failures needed before -# switching preferred NLP in Combo mode -# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy -# must be, in multiples, between two NLP location reports to -# be considered much worse accuracy. Used in switching logic -# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines -# whether or not to still send network location requests to -# QNP when the EULA is not consented to by the user. QNP can -# still return ZPP locations or injected locations even -# without EULA consent, but the uncertainty can be high. -NLP_MODE = 1 -NLP_TOLERANCE_TIME_FIRST = 5000 -NLP_TOLERANCE_TIME_AFTER = 20000 -NLP_THRESHOLD = 3 -NLP_ACCURACY_MULTIPLE = 2 -NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1 - -# Threshold period for ZPP triggers -ZPP_TRIGGER_THRESHOLD=60000 - -################################### -# GEOFENCE SERVICES -################################### -# If set to one of the defined values below, it will override -# the responsiveness for geofence services, which implements -# the Proximity Alert API. If not set to a value defined below, -# which is default, it will not override the responsivness. -# The geofence HAL API is unaffected by this value. -# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values: -# 1: LOW responsiveness -# 2: MEDIUM responsiveness -# 3: HIGH responsiveness -GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0 - -##################################### -# IZAT PREMIUM FEATURE SETTINGS -##################################### -#Possible states of a feature: -#DISABLED -#BASIC -#PREMIUM - -#GTP_CELL_PROC valid options: -# AP -# MODEM -GTP_CELL_PROC=MODEM - -#GTP_CELL valid modes: -# DISABLED -# BASIC -GTP_CELL=DISABLED - -#GTP_WIFI valid modes: -# DISABLED -# BASIC -GTP_WIFI=DISABLED - -#GTP_WAA valid modes: -# DISABLED -# BASIC -GTP_WAA=DISABLED - -#SAP valid modes: -# DISABLED -# BASIC -# PREMIUM -SAP=DISABLED - -#ODCPI valid modes: -#DISABLED -#BASIC -ODCPI=DISABLED - -#FREE_WIFI_SCAN_INJECT valid modes: -#DISABLED -#BASIC -FREE_WIFI_SCAN_INJECT=DISABLED - -#SUPL_WIFI valid modes: -#DISABLED -#BASIC -SUPL_WIFI=DISABLED - -#WIFI_SUPPLICANT_INFO valid modes: -#DISABLED -#BASIC -WIFI_SUPPLICANT_INFO=DISABLED - -##################################### -# Location process launcher settings -##################################### - -#Values for PROCESS_STATE: -# ENABLED -# DISABLED - -#FEATURE MASKS: -# GTP-WIFI 0X03 -# GTP-AP-CELL 0X0c -# GTP-MP-CELL 0xc00 -# GTP-WAA 0X300 -# SAP 0Xc0 -# ODCPI 0x1000 -# FREE_WIFI_SCAN_INJECT 0x2000 -# SUPL_WIFI 0x4000 -# WIFI_SUPPLICANT_INFO 0x8000 - -#Values for PLATFORMS can be: -#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226 -#2. all -> for All platforms - -#Values for BASEBAND can be: -#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 -#2. all -> for all basebands - -#Valyes for LEAN_TARGETS can be: -#ENABLED -> if this process is supposed to run on lean and mean targets -#DISABLED -> if this process is to be disabled on lean and mean targets -PROCESS_NAME=/system/bin/garden_app -PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1 -PROCESS_STATE=ENABLED -PROCESS_GROUPS=gps net_raw -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=all -BASEBAND=auto -LEAN_TARGETS=DISABLED - -PROCESS_NAME=/system/bin/gpsone_daemon -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=inet net_raw -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=msm7630_fusion -BASEBAND=svlte2a sglte sglte2 -LEAN_TARGETS=DISABLED - -PROCESS_NAME=/system/bin/lowi-server -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=gps net_admin wifi inet oem_2950 net_raw -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0xf303 -PLATFORMS=all -BASEBAND=all -LEAN_TARGETS=DISABLED - -PROCESS_NAME=/system/bin/xtwifi-inet-agent -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=inet gps -PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xc0f -PLATFORMS=all -BASEBAND=all -LEAN_TARGETS=DISABLED - -PROCESS_NAME=/system/bin/xtwifi-client -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=net_admin wifi inet gps net_raw oem_3013 oem_2950 -PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xf0f -PLATFORMS=all -BASEBAND=all -LEAN_TARGETS=DISABLED - -PROCESS_NAME=/system/vendor/bin/slim_daemon -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=gps net_raw oem_2950 -PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xf0 -PLATFORMS=all -BASEBAND=all -LEAN_TARGETS=DISABLED diff --git a/gps/sap.conf b/gps/sap.conf deleted file mode 100644 index 35426da..0000000 --- a/gps/sap.conf +++ /dev/null @@ -1,53 +0,0 @@ -################################ -# Sensor Settings -################################ -#The following parameters are optional. -#Internal defaults support MEMS sensors -#native to most handset devices. -#Device specific sensor characterization -#for improved performance is possible as -#described in SAP application notes. -#GYRO_BIAS_RANDOM_WALK= -#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY= -#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY= -#RATE_RANDOM_WALK_SPECTRAL_DENSITY= -#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY= - -# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0) -# used in loc_eng_reinit -SENSOR_ACCEL_BATCHES_PER_SEC=2 -SENSOR_ACCEL_SAMPLES_PER_BATCH=5 -SENSOR_GYRO_BATCHES_PER_SEC=2 -SENSOR_GYRO_SAMPLES_PER_BATCH=5 -# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0) -SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4 -SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25 -SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4 -SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25 - -# Sensor Control Mode (0=AUTO, 1=FORCE_ON) -# used in loc_eng_reinit -SENSOR_CONTROL_MODE=0 - -# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable) -# used in loc_eng_reinit -SENSOR_USAGE=1 - -# Choose GSIFF sensor provider (1=Snapdragon Sensors Core, 2=Android NDK) -SENSOR_PROVIDER=1 - -# Bit mask used to define which sensor algorithms are used. -# Setting each bit has the following definition: -# 0x1 - DISABLE_INS_POSITIONING_FILTER -# 0x0 - ENABLE_INS_POSITIONING_FILTER -SENSOR_ALGORITHM_CONFIG_MASK=0x1 - -# Time source used by Sensor HAL -# Setting this value controls accuracy of location sensor services. -# 0 - Unknown -# 1 - CLOCK_BOOTTIME -# 2 - CLOCK_MONOTONIC -# 3 - CLOCK_REALTIME -# 4 - CLOCK_BOOTTIME using Alarm timer interface -NDK_PROVIDER_TIME_SOURCE=1 - @@ -59,16 +59,6 @@ PRODUCT_PACKAGES += \ brcm-uim-sysfs \ libfmradio.v4l2-fm -# GPS -PRODUCT_COPY_FILES += \ - $(COMMON_PATH)/gps/flp.conf:system/etc/flp.conf \ - $(COMMON_PATH)/gps/gps.conf:system/etc/gps.conf \ - $(COMMON_PATH)/gps/izat.conf:system/etc/izat.conf \ - $(COMMON_PATH)/gps/sap.conf:system/etc/sap.conf - -PRODUCT_PACKAGES += \ - gps.msm8974 - # IPC Security Config PRODUCT_COPY_FILES += \ $(COMMON_PATH)/configs/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config @@ -115,7 +105,6 @@ PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \ frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \ - frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \ frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \ frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \ |